AUTOMATIC CORING MACHINE
DAR806
Coringcircular shape
from a flatboard
Correspondingto a thin filter and variouswork pieces
Ultrasonicspindle
mounted
Ultrasonic spindle mounted !Coring 1mmφ thin sheet filter is achieved.
YAC DAStech, Inc.
�e last fort in cutting
Daspen
Applications Example Suitable materialsVarious glass, ceramics, Si, sapphire, Hard film material
Suitable products・Si substrates・PZT substrates・Optical filter
Optical filter samples
・Infrared filter
Core drill
・The cylindrical diamond blade is turning at high-speed・Less chipping and quick process is achieved
DAR806 仕様
Effective strokeMinimum indexing uintFeed speedAxis drive systemDrive sourceEffective strokeMinimum indexing uintFeed speedAxis drive systemDrive sourceEffective strokeMinimum indexing uintFeed speedAxis drive systemDrive sourceChucking methodFlat frameSource of vacuumStyleThe oscillating frequency toleranceThe motor maximum rated outputDrill holding systemThe use rotation rangeThe use wheel stone sizeDrill diameterPower sourceNoiseGroundingPower consumptionAir pressureAir consumption
200（Processing possible work margin）0.001 0.1 - 100 High precision ball screw is driven by a servo motorAC Servo motor
200（Processing possible work margin）0.001 0.1 - 100 High precision ball screw is driven by a servo motorAC Servo motor
100 0.001 0.005 - 20High precision ball screw is driven by a servo motorAC Servo motor
Vaccum chucking on the porous table 2-8-1The vacuum generator with ejector system
Mechanical spindle Ultrasonic spindle − 40（A little adjustment is made of an control nob）500 The clamp system3,000 - 15,000 The shank part φ6φ1.0 - 10.03 phase 200V±10% 50/60Hz In pulse width 500ns, less than 2000 V Resistance during installation Less than 100 Ω of JIS third class80.5580
700（W）× 850（D）× 1,750（H） 500
(mm)(mm)
(mm/sec)
(mm)(mm)
(mm/sec)
(mm)(mm)
(mm/sec)
(kHz)(W)
(min-1)
(kVA)(MPa)
（l/min（A.N.R））(mm)
(kg)
X Axis
Y Axis
Z Axis
Chuck table
Spindle
Utility
Machine body sizeMachine body weight
Chuck table (mm) 200×200
1612C10（E）-1
F lexible A utomatic S licing T echnology
Our motto is “FAST”
www.yacdastech.co.jp8-5, Bijogi 3-chome Toda City Saitama 335-0031, JapanTel 81-48-421-1113 Fax [email protected]
YAC DAStech, Inc.
DAR806Structureadvantages
The specification of this machine have a case to change for improvement. Please contact our sales for inquiry as to cutting applications.
