+ All Categories
Home > Documents > Automatic folding of the external mirrors by locking doors ...Mirror Folding System for Hyundai from...

Automatic folding of the external mirrors by locking doors ...Mirror Folding System for Hyundai from...

Date post: 02-Mar-2020
Category:
Upload: others
View: 9 times
Download: 0 times
Share this document with a friend
3
Maxam Mirror Folder Automatic folding of the external mirrors by locking doors with the remote control Ref. 100.05.014 FITTING INSTRUCTIONS FOR HYUNDAI IX20 - I30- IX35 - I40 2012 vos nv • industrielaan 14 • 3730 hoeselt • belgium tel. 089 49 26 73 • fax 089 49 26 74 [email protected] • www.vos.be 2012-07-26 – version 2.0
Transcript

Maxam Mirror Folder Automatic folding of the external mirrors

by locking doors with the remote control

Ref. 100.05.014

FITTING INSTRUCTIONS

FOR HYUNDAI IX20 - I30- IX35 - I40 2012

vos nv • industrielaan 14 • 3730 hoeselt • belgium

tel. 089 49 26 73 • fax 089 49 26 74

[email protected] • www.vos.be

2012-07-26 – version 2.0

Mirror Folding System for Hyundai from 2012 – Fitting instructions

2

Description Mirror folding system for Hyundai ix20 – i30 – ix35 – i40 from 2012.

All the connections are made in the driver’s door.

Remove the driver’s sides door panel, unplug 1 connector, connect 1 T-harness and 1 wire to

solder.

Fitting time: ± 15 minutes.

Kit composition

This product must be fitted by installers with the

necessary knowledge in car technics.

Not following these instructions can lead to accidents,

damage to car parts or to the system itself.

1 Electronic module

2 T-harness

3 Blue wire to connect to lock pulse

1 2

3

Mirror Folding System for Hyundai from 2012 – Fitting instructions

3

Installation

Remove the door panel at driver’s side.

Remove the screws and unclick the door panel starting from bottom side.

Unplug the connector for mirror command.

Glue the module (1) on the indicated location (see picture) with the self adhesive patch

provided on the back side of the module.

Root the blue wire of the module to point 2 (see picture) and connect it to the “lock signal”

wire (see info below).

Plug the connectors of the T-harness into the corresponding connectors of the mirror

command (3 on picture).

Plug the remaining connector into the module.

Take care to solder the connection of the blue wire with the lock signal wire and insulate.

Mount the door panel.

The wire with the lock signal is in the same

location on all car models (2 on picture). Colour wire with lock signal:

Remark:

A car manufacturer may apply modifications without prior advice.

Verify the exactitude of this information before connecting the system.

Functioning of the system By locking the doors with the original remote control with ignition OFF, the mirrors

automatically fold.

By unlocking the doors, the mirrors stay folded.

After unlocking the doors, switch on the ignition to unfold the mirrors.

The manual command functions of the mirrors are maintained.

In case the mirrors are folded manually, the original switch has priority on the

remote control.

To unfold the mirrors, unlock the mirrors by means of the original switch.

Hyundai ix20 purple or grey

Hyundai i30 grey

Hyundai ix35 orange

Hyundai i40 grey

2

1

3


Recommended