Automatismos Para Wcs

Mediclinics GroupSince 1974, at mediclinics a team of qualified professionals has been designing, developing, manufacturing and commercializing a wide range of hand dryers, dispensers and accessories.

Mediclinics has always been at the forefront of the industry, the leader and reference point for professionals.

Research Development and InvestigationPERMANENT TECHNOLOGICAL EVOLUTIONWe design and develop our products with ergonomic principles in mind, focusing on functionality, safety and anti-vandalism. At the vanguard in terms of aesthetics, Mediclinics products provide solutions for hygiene and comfort in the most diverse environments.

ProductionOWN DESIGN AND TECHNOLOGYAt Mediclinics there is ongoing investment in human and technological resources in order to produce products whose materials and design have been adapted to needs established in architectural and engineering research and by our customers.

After Sale ServiceOUR GOAL: CLIENT’S SATISFACTIONMediclinics’ commitment to the customer does not end with the sale of the product. Our product guarantee requires a flexible and efficient service in order to satisfy the needs of the market and all of our customers.

International Market and PositioningWORLDWIDE COMMITMENTFrom its manufacturing centers in Spain, the Mediclinics group distributes its products worldwide through the company Mediclinics, S.A. and its subsidiaries in Holland (Mediclincs B.V.) and the United States (Saniflow Corp.).

An efficient network of distributors ensures the constant presence of our products in over 80 countries, guaranteeing punctual delivery and a personalized service for all our customers.

Mediclinics official moto sponsorMediclinics reached an agreement with Jack&Jones WRB team to sponsor them for 2008.It is very challenging and satisfying to see the Mediclinics brand in top global events such as the MotoGPWe trust that this investment will surely lead the Mediclinics name to places never expected.

index

MEDICLINICS GROUP 2

HAND DRYERS 4

Saniflow 4-7

Saniflow E05 8-11

Mediflow 12-15

Speedflow 16-17

Optima 18-19

Junior Plus 20-21

Prima/Senior 22-23

Smartflow 24-25

HAIR DRYERS 26

For heavy duty application 26-27

For hotel room 28-29

SOAP DISPENSERS 30

Stainless steel AISI 304 30-31

Thermoplastic 32

Recommended soaps 33

TOILET PAPER DISPENERS 34

Industrial roll 34-35

Standard roll 36

Multi-roll 37

PAPER TOWEL DISPENSERS 38

Paper towel dispensers 38-39

Combination towel/dryer/waste units 40

Cleaning stainless steel 41

Centre feed dispensers 42-43

WASTE RECEPTACLES 44

With self-closing lid 65-80 L 44-45

Without lid 65-80 L 46

With swing top / + ashtray 55-75 L 47

Rectangular 25 L 48

Sanitary napkin disposal bins 6L 49

GRAB BARS AND ACCESSORIES FOR A BARRIER-FREEWASHROOM 50

Straight bars 51

Swing-up bars 52-53

Angled bars 54-55

Wall to wall bars 56

With three support points bars 57

Wall to the floor bars 58

Folding seats 59

HOTEL BATHROOM ACCESSORIES 60

Chromed brass 61-63

Stainless Steel Medinox 64-66

CERTIFICATIONS 67

SHIPPING INFORMATIONAND SALES CONDITIONS

NEW

NEW

Unique points¥ Long-lasting, compact units with anti-vandalism features

¥ Available in push-button and automatic

¥ Minimum maintenance

¥ Classic design with a successful market experience

¥ High air velocity to ensure quick drying

¥ Cover comes in a choice of different materials and finishes

¥ Rotating nozzle

¥ First class component quality

To be installed in high traffic areas. Ideal for airports, petrol

stations, discos, schools, universities, stadiums, parks

Hand dryers

0405

Hand dryers sensor operated,Saniflow

Hand

dry

ers

• Sa

niflo

w s

enso

r ope

rate

d

Technical Specifications

• Cover fixed to the base by means of 2 vandal-proof lock screwsand lock with special Saniflow® wrench.

• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wallmounting.

• Fire resistant plastic UL 94-VO fan scroll.• Universal brush motor, 5500 rpm, F class, incorporates a

self-resetable safety thermal cut-off at 120 ºC.

• Aluminium centrifugal double symmetrical inlet fan wheel.• Waved wire NiCr heating element on a mica frame that incorporates

a self-resetable safety thermal cut-off at 80 ºC.• Nozzle in chrome plated zamak, 22 m thick.• Two distances (15/25 cm) IR electronic detection sensor.

Voltage 220 - 240 V Total power 2250 W

Frequency 50/ 60 Hz Motor power 250 W

Electrical Class I Heating element 2000 Wisolation power

Consumption 10 A Protection level IP23

Weight 6,5 Kg RPM 5500

Effective 330 m3/h/ Air temperatureairflow 5500 l/min (at 10 cm distance

at 21ºC) 53 ºC

Nominal 470 m3/h/ Drying time 29 secairflow 7800 l/min

Air velocity 96 Km/h Noise level 70 dB(at 2 m)

Saniflow E88A E88AC E88ACS E88A0

Components & Materials

Steel one-piece cover chromed brightfinish, 1,9 mm thick.Dimensions: 248 x 278 x 210 mm.

E85A

CAST IRON WHITEENAMELLED COATING

UNITS PER BOX: 1UNITS PER PALLET: 32 (A)


Steel one-piece cover white porcelainenamelled coating, 1,9 mm thick.Dimensions: 248 x 278 x 210 mm.

E88AC

STEEL CHROMEDBRIGHT FINISH



Cast iron one-piece cover white porcelainenamelled coating, 6 mm thick.Dimensions: 255 x 282 x 215 mm


E88A

STEEL WHITEENAMELLED COATING

278 mm(11”)

248 mm(9-3/4”)

210 mm(8-1/4”)

210 mm(8-1/4”)

NOTE: Drying time may vary depending on conditions

Hand dryers sensor/push-button operated,Saniflow



Steel one-piece cover chromed goldenfinish, 1,9 mm thick.Two distances (15/25 cm) IR electronicdetection sensor.Dimensions: 248 x 278 x 210 mm.


Steel one-piece cover chromed satinfinish, 1,9 mm thick.Two distances (15/25 cm) IR electronicdetection sensor.Dimensions: 248 x 278 x 210 mm.







at 21ºC) 53 ºC



Saniflow E85A E85

215 mm(8-1/2”)

215 mm(8-1/2”)

282 mm(11-1/8”)

255 mm(10”)


Cast iron one-piece cover white porcelainenamelled coating, 6 mm thick. Push -buttonin chrome plated zamak, 22 m thick thatactivates an electromechanical timer with a34 seconds cycle.Dimensions: 255 x 282 x 215 mm.


• Base in aluminum, 3 mm thick, with 4 Ø 8 mm holes for wallmounting.




a self-resetable safety thermal cut-off at 80 ºC.• Nozzle in chrome plated zamak, 22 m thick.

CAST IRON WHITEENAMELLED COATING

E85UNITS PER BOX: 1

UNITS PER PALLET: 32 (A)

E88ACS

STEEL CHROMED SATIN FINISH


E88AO

STEEL CHROMEDGOLDEN FINISH


215 mm(8-1/2”)

282 mm(11-1/8”)

255 mm(10”)


0607

Hand

dry

ers

• Sa

niflo

w s

enso

r / p

ush-

butto

n op

erat

ed



• Base in aluminum, 3 mm thick, with 4 Ø 8 mm holes for wallmounting.




a self-resetable safety thermal cut-off at 80 ºC.• Nozzle in chrome plated zamak, 22 m thick.• Push -button in chrome plated zamak, 22 m thick that activates

an electromechanical timer with a 34 seconds cycle.







at 21ºC) 53 ºC



Saniflow E88 E88C E88CS E880

278 mm(11”)

248 mm(9-3/4”)

210 mm(8-1/4”)

210 mm(8-1/4”)


Steel one-piece cover white porcelainenamelled coating, 1,9 mm thick.Dimensions: 248 x 278 x 210 mm.


Steel one-piece cover chromedbright/satin finish, 1,9 mm thick.Dimensions: 248 x 278 x 210 mm.


E88O

STEEL CHROMEDGOLDEN FINISH


Steel one-piece cover chromed goldenfinish, 1,9 mm thick.Dimensions: 248 x 278 x 210 mm.

Hand dryers push-button operated,Saniflow

E88

STEEL WHITEENAMELLED COATING


E88C/CS

STEEL CHROMEDBRIGHT / SATIN FINISH



Unique points• Long-lasting, compact units with anti-vandalism features

• Reception led of electronic in black color to avoid light reflections

• Leds integrated in the electronic board

• Leds protected by a PC viewing screen

• Advance adjustment of the detection distance combining

potentiometer and jumper

• Four silent blocks to eliminate vibrations

• Revolutionary cover fixing system to avoid vandalism

The cover will be fixed adjusting the screws anti-clockwise

• Rotating nozzle

• First class component quality

To be installed in high traffic areas. Ideal for airports,

petrol stations, discos, schools, universities, stadiums, parks…

Hand dryers

Hand dryers sensor operated,Saniflow

Hand

dry

ers

• Sa

niflo

w s

enso

r ope

rate

d







a self-resetable safety thermal cut-off at 80 ºC.• Nozzle in chrome plated zamak, 22 m thick.• Fully adjustable (15 - 25 cm) IR electronic detection sensor.• Sensors come with a polycarbonate viewing window.






Effective 330 m3/h Air temperatureairflow 5500 l/min (at 10 cm distance

at 21ºC) 53 ºC

Nominal 470 m3/h Drying time 29 secairflow 7800 l/min


Saniflow E05A E05AC E05ACS

210 mm(8-1/4”)

276 mm(10-7/8”)

245 mm(9-5/8”)

210 mm(8-1/4”)

E05AC

STAINLESS STEEL AISI 304BRIGHT FINISH



Stainless steel AISI 304 one-piece coverbright finish, 1,5 mm thick.Dimensions: 245 x 276 x 210 mm.


Steel one-piece cover white epoxy coated,1,5 mm thick.Dimensions: 245 x 276 x 210 mm.


E05A

STEELWHITE EPOXY FINISH

0809


Hand dryers sensor/push-button operated,Saniflow


E05ACS

STAINLESS STEEL AISI 304SATIN FINISH



Stainless steel AISI 304 one-piece coversatin finish, 1,5 mm thick. Sensors comewith a polycarbonate viewing window.Fully adjustable (15 - 25 cm) IR electronicdetection sensor.Dimensions: 245 x 276 x 210 mm.







at 21ºC) 53 ºC



Saniflow E05

276 mm(10-7/8”)

245 mm(9-5/8”)

210 mm(8-1/4”)

210 mm(8-1/4”)






a self-resetable safety thermal cut-off at 80 ºC.• Nozzle in chrome plated zamak, 22 m thick.


Steel one-piece cover white epoxy coated,1,5 mm thick. Push-button in chrome platedzamak, 22 m thick, that activates anelectronic timer with a 35 second cycle.Dimensions: 245 x 276 x 210 mm.


E05




1011

Hand

dry

ers

• Sa

niflo

w s

enso

r / p

ush-

butto

n op

erat

ed






a self-resetable safety thermal cut-off at 80 ºC.• Nozzle in chrome plated zamak, 22 m thick.• Push-button in chrome plated zamak, 22 m thick, that activates

an electronic timer with a 35 second cycle.







at 21ºC) 53 ºC



Saniflow E05C E05CS

276 mm(10-7/8”)

245 mm(9-5/8”)

210 mm(8-1/4”)

210 mm(8-1/4”)


Stainless steel AISI 304 one-piece coversatin finish, 1,5 mm thick.Dimensions: 245 x 276 x 210 mm.

E05CS





E05C



Hand dryers push-button operated,Saniflow


Unique points• Long-lasting, compact units with anti-vandalism features

• Electronic control system selects fully automatic for each drying

cycle the heating-capacity requires for optimal airflow temperature

• Computerized electronic system eliminates effect of reflection

of fixed objects

• Modulated management of heating-element for longer component life

• Safety-timer of 120 seconds

• Lowest noise level in its range

• Optimal drying power

• Four silent blocks to eliminate vibrations

• First class component quality

To be installed in high traffic areas. Ideal for airports, petrol stations,

discos, schools, universities, stadiums, parks…

Hand dryers

The electronic control system selects fully automaticfor each drying cycle the heating-capacity requiredfor optimal airflow temperature.

T < 25 ºC 2.750 W -25 ºC T 30 ºC 2.000 W 27%30 ºC T 35 ºC 1.000 W 64%T > 35 ºC 250 W 91%

(*) The three first seconds of each cycle provide the maximum heating power.

Room Total Energytemperature power saving (*)

ADA

1213

Hand dryers sensor operated,Mediflow, thermostatic control system

Hand

dry

ers

• M

edifl

ow L

ogic

Dry

Voltage 220 - 240 V Total power 250 - 2750 W


Electrical Class II Heating element 0 - 2500 Wisolation power

Consumption 1,1 - 12 A Protection level IP23

Weight M02A 4,85 Kg RPM 4500M02AC/CS 4,25 Kg


at 21ºC) 49 ºC



Mediflow Logic Dry MO2A MO2AC MO2ACS







• Cover fixed to the base by means of 2 vandal-proof lock screwsand lock with special Mediflow® wrench.

• Fire resistant plastic UL 94-V0 base and fan scroll, with 4 Ø 8 mmholes for wall mounting. It includes silent-blocks to dampmechanical vibrations.

• Universal brush motor, 4500 rpm, F class, includes a self-resetablesafety thermal cut-off at 120 ºC.

• Aluminium centrifugal double asymmetrical inlet fan wheel.

• Fe, Al & Cr taped wire heating element mounted on a micaframe that incorporates a self-resetable safety thermal cut-offat 110 ºC. Automatic disconnection 1/2 second before motor stop.

• Automatic regulation of air temperature on ambient temperature.• Selective detection of fixed targets and automatic disconnection system

after 120 seconds of continuous use.• Fully adjustable (5 - 20 cm) IR electronic detection sensor by means

of a potentiometer. Sensors come with a polycarbonate viewing window.

Dimensions L1 M02A 320 mm (12-5/8’’)M02AC/CS 325 mm (12-7/8’’)


L1

164 mm(6-1/2”)

272 mm(10-3/4”)

MO2AC


UNITS PER BOX: 1UNITS PER PALLET: 24 (F)

MO2ACS



MO2A




Hand dryers sensor operated,Mediflow








Electrical Class II Heating element 2500 Wisolation power




at 21ºC) 49 ºC





• Cover fixed to the base by means of 2 vandal-proof lock screwsand lock with special Mediflow® wrench.

• Fire resistant plastic UL 94-V0 base and fan scroll, with4 Ø 8 mm holes for wall mounting. It includes silent-blocksto damp mechanical vibrations.

• Universal brush motor, 4500 rpm, F class, includes a self-resetablesafety thermal cut-off at 120 ºC.

• Aluminium centrifugal double asymmetrical inlet fan wheel.• Fe, Al & Cr taped wire heating element mounted on a mica frame

that incorporates a self-resetable safety thermal cut-off at 80 ºC.• Two distances (15/25 cm) IR electronic detection sensor.• Sensors come with a polycarbonate viewing window.

Basic

Mediflow Basic MO3A MO3AC MO3ACS

Dimensions L1 M03A 320 mm (12-5/8’’)M03AC/CS 325 mm (12-7/8’’)

164 mm(6-1/2”)

272 mm(10-3/4”)

L1

MO3AC



MO3A




MO3ACSUNITS PER BOX: 1

UNITS PER PALLET: 24 (F)


1415

Kit for recessed Mediflow(hand dryer not included)

Hand

dry

ers

• M

edifl

ow B

asic

/ Ki

t Med

iflow

Recommended heights for hand dryers.

KT0010CS




Stainless steel AISI 304 frame, satinfinish, 1,5 mm thick. With 4 screw holesof Ø 9 mm for mounting on the wall.Dimensions: 481 x 340 x 1,5 mm.

KT0010C




Stainless steel AISI 304 frame, brightfinish, 1,5 mm thick. With 4 screw holesof Ø 9 mm for mounting on the wall.Dimensions: 481 x 340 x 1,5 mm.

296 mm(11-5/8”)

425 mm(16-3/4”)

75,5 mm(3”)

340 mm(13-3/8”)

1,5 mm(1/16”)

481 mm(18-7/8”)


• Electro-zinced iron cabinet, 1,5 mm thick, with 16 screw holesof Ø 6 mm for mounting on the wall, it includes 4 M5 bolts weldedon top of the base plate for the fitting of the Mediflow® hand dryer.

• Grey rubber seal, offers a reinforcing outside protection thatminimizes vibrations and noise.

• Nuts and bolts for the fitting of the dryer to the kit and theframe to the wall included.

Mediflow recessed model complies with ADAregulations. The recessed kit is 90 mm fromthe wall. ADA norm limits to 100 mm thedistance from any equipment installedin a collective washroom.

ADA

Kit Mediflow KT0010C KT0010CS

120 cm(47’’)

115 cm(45’’)

95 cm(37’’)

100 cm(40’’)


Unique points• Long lasting compact units with anti-vandalism features• Complies with ADA requirements for a barrier-free washroom• Fan scroll has a patented design, which permits the perfect balance between

dimensions and features• High speed motor. RPM can be adjusted manually. Air velocity and noise

can be selected between different levels• Universal voltage. Voltage is automatically selected depending on the voltage

input (from 110 V to 240 V)• The self-resetable safety thermal cut-off in the heating element disconnects

the whole appliance for maximum safety• The electrical board includes a micro-processor which controls the wear

of the motor brushes. Once the motor brushes are consumed, the wholedryer disconnects

• Safety timer of 120 seconds• Four silent blocks to eliminate vibrations• First class component quality

To be installed in high and medium traffic areas. The dryer can be adjustedfor different needs. It is suitable to be used in an office as well as in anindustrial or high traffic enviroment

Hand dryersspeedflow ®

ADA

1617

Hand dryers sensor operated,Speedflow

Hand

dry

ers

• Sp

eedf

low


Voltage 100 - 120 V, Total power 1150 W208 V, 220 - 240 V


Electrical Grounding Heating 900 Wisolation required element power (450 + 450W)

Weight M06AF 6,9 Kg Protection level IP23 M06A/C/CS 3,6 Kg

Effective 61 - 98 m3/h/ Nominal 73 - 118 m3/h/airflow 1012 - 1632 l/min airflow 1215 - 1958 l/min

Consumption 4,8 A (240 V) Air temperature9,5 A (120 V) (at 10 cm distance

at 21ºC) 41 - 44 ºC

RPM 3800 - 8200 Drying time 10 - 12 sec

Air velocity 90 - 180 Km/h Noise level 64 - 74 dB (at 2 m)

Speedflow M06AF M06A M06AC M06ACS


Stainless steel one-piece cover satin finish,1.5 mm thick.

M06AF/M06A

CAST IRON / STEELWHITE FINISH

UNITS PER BOX: 1UNITS PER PALLET: 42 (C)


Stainless steel one-piece cover brightfinish, 1.5 mm thick.

M06ACS




Cast iron two-piece cover white porcelainenameled coating, 4 mm thick / Steelone-piece cover white epoxy, 1.5 mm thick.


M06AC


• Aluminium centrifugal double asymmetrical inlet fan wheel.

• Waved wire NiCr heating element mounted on a mica frame.It incorporates a self-resetable safety thermal cut-off whichdisconnects the whole appliance.

• Automatic disconnection system after 60 seconds ofcontinuous use.

• Fully adjustable (5 - 25 cm) IR electronic detection sensor bymeans of a potentiometer.

• Sensors come with a polycarbonate viewing window.

Dimensions L1 M06AF 294 mm (11-5/8’’)M06A/C/CS 289 mm (11-1/2’’)

Dimensions L2 M06AF 270,5 mm (10-5/8’’)M06A/C/CS 266,8 mm (10-1/2’’)

100 mm(4”)

L1

L2

• Cover fixed to the base by means of 2 vandal-proof lock screwsand lock with special Speedflow® wrench.

• Aluminium base, with 4 Ø 8 mm holes for wall mounting.It includes silent-blocks to damp mechanical vibrations.

• Fire resistant plastic UL 94-V0 fan scroll.

• High speed motor. Universal brush motor, 3800 - 8200 rpm,A class. RPM may be adjusted manually by means of a potentiometer.The motor includes a safety thermal cut-off.


ADA

Unique points• Great performance in stylish design stainless steel AISI 304 and white epoxy• Perfect balance between performances and power consumption• Choice in three different covers• Automatic activation• Sturdy metal air outlet grill• First class component quality

To be installed in medium traffic areas. Ideal for restaurants, theaters,cinemas, hotels, offices…

Hand dryers

1819

Hand dryers sensor operated,Optima


Hand

dry

ers

• Op

tima







at 21ºC) 52 ºC



Optima M99A M99AC M99ACS




Stainless steel AISI 304 one-piece cover,bright finish, 1,5 mm thick.Dimensions: 302 x 255 x 140 mm.



• Cover fixed to the base by means of 4 Allen head screws.• Fire resistant thermoplastic ABS UL 94-V0 base and fan scroll,

with 4 Ø 8 mm holes for wall mounting.• Induction motor, 2800 rpm, F class, maintenance-free and high

durability, incorporates a self-resetable safety thermal cut-offat 130 ºC.

• PP UL94-V0 with single inlet fan wheel.• Waved wire NiCr heating element that incorporates

a self-resetable safety thermal cut-off at 70 ºC.• Two distances (15/25 cm) IR electronic detection sensor.• Zamak air outlet grill.

255 mm(10-1/16”)

140 mm(5-1/2”)

302 mm(11-7/8”)

UNITS PER BOX: 6UNITS PER PALLET: 48 (B)


M99ACSUNITS PER BOX: 6

UNITS PER PALLET: 48 (B)

M99AC



M99A



Unique points• Great performance in stylish design ABS cover• Perfect balance between performances and power consumption• Rounded top to avoid cigarettes to be laid• Leds protected by a PC viewing screen• Push button or automatic version• Sturdy metal air outlet grill• First class component quality

To be installed in medium traffic areas. Ideal for restaurants,theaters, cinemas, hotels, offices…

Hand dryers

2021

Hand dryers sensor / push-button operated,Junior Plus


Hand

dry

ers

• Ju

nior

Plu

sVoltage 220 - 240 V Total power 1640 W




Weight 3 Kg RPM 2800


at 21ºC) 52 ºC



Junior plus M88A PLUS M88 PLUS

• Cover fixed to the base by means of 4 Allen head screws.• Fire resistant thermoplastic ABS UL 94-V0 base and fan scroll,

with 4 Ø 8 mm holes for wall mounting.• Induction motor, 2800 rpm, F class, maintenance-free and high


• PP UL94-V0 with single inlet fan wheel.• Waved wire NiCr heating element, incorporates

a self-resetable safety thermal cut-off at 70 ºC.• Zamak air outlet grill.

253 mm(10”)

302 mm(11-7/8”)

153 mm(6”)

302 mm(11-7/8”)

253 mm(10”)

302 mm(11-7/8”)


White ABS thermoplastic one-piece cover,3 mm thick. Two distances (15/25) IRelectronic detection sensor.Sensors come with a polycarbonateviewing window.Dimensions: 302 x 253 x 153 mm.


White ABS thermoplastic one-piece cover,3 mm thick. Push-button activates anelectronic timer, with a 45 second cycle.Dimensions: 302 x 253 x 153 mm.


WHITE ABSSENSOR OPERATED

M88A PLUS


M88 PLUS

WHITE ABSPUSH-BUTTON OPERATED


Unique points Prima• Attractive melamine cover which offers resistance against fire,

cigarette burns, water, sunlight and organic detergents• Perfect balance between performances and power consumption• Push button or automatic version• Sturdy metal air outlet grill• First class component quality

Unique points Senior• Strong Aluminium cover• Competitively priced• Automatic version• Sturdy metal air outlet grill• First class component quality

To be installed in medium traffic areas. Ideal for restaurants,theaters, cinemas, hotels, offices…

Hand dryersprima/senior

2223

Hand dryers sensor / push-button operated,Prima/ Senior


Hand

dry

ers

• Pr

ima/

Sen

ior

Prima M96A M96 Voltage 220 - 240 V Total power 1650 W


Electrical Class II Heating 1510 Wisolation element power

Consumption 7 A Protection M96A/M89A IP23level M96 IP21

Weight Prima 3,5 Kg RPM 2800Weight Senior 3,75 Kg


at 21ºC) 51 ºC

Nominal 200 m3/h/ Drying time Prima 45 secairflow 3300 l/min Senior 43 sec

Air velocity 60 Km/h Noise level (at 2 m) 60 dB

• Cover fixed to the base by means of 4 Phillips head screws.• Thermoplastic PP+ talcum base, with 4 Ø 8 mm holes for wall

mounting.• Induction motor, 2800 rpm, B class, maintenance-free and high


• PP UL94-VO with single inlet fan wheel.• Waved wire NiCr heating element that incorporates

a self-resetable safety thermal cut-off at 80 ºC.• Stainless steel air outlet grill.

154 mm(6-1/8”)

305 mm(12”)

255 mm(10”)

305 mm(12”)


White melamine one-piece cover, 4 mmthick. Two distances (15/25 cm) IR electronicdetection sensor.Dimensions: 305 x 255 x 154 mm.


M96A

WHITE MELAMINESENSOR OPERATED


White melamine one-piece cover, 4 mmthick. Push-button activates an electronictimer, with a 45 second cycle.Dimensions: 305 x 255 x 154 mm.


WHITE MELAMINEPUSH-BUTTON OPERATED

M96



WHITE ALUMINIUMSENSOR OPERATED

M89A


Aluminium one-piece cover white epoxycoated, 3 mm thick. Two distances(15/25 cm) IR electronic detection sensor.Dimensions: 301 x 254 x 134 mm.

Senior M89A

134 mm(5-1/4”)

301 mm(11-3/4”)

254 mm(10”)

301 mm(11-3/4”)

134 mm(5-1/4”)

Unique points• Optimal size for small toilet rooms• ABS cover in three different finishes: white, bright and silver satin• Perfect balance between performances and power consumption• Leds protected by a PC viewing screen• Cost effective and great performances• First class component quality

To be installed in low-medium traffic areas. Ideal for offices, cafés,buses, doctor praxis…

Hand dryers

2425

Hand dryers sensor operated,Smartflow


Voltage 220 - 240 V Total power 1,100 W



Consumption 4,8 A Protection level IP23



at 21ºC) 47 ºC



Smartflow M04A M04AC M04ACS

145 mm(5-11/16”)

138 mm(5-3/8”)

258 mm(10-3/16”)

smartflow


White ABS thermoplastic one-piececover, 3 mm thick.Dimensions: 258 x 145 x 138 mm.

WHITE ABS

MO4AUNITS PER BOX: 12

UNITS PER PALLET: 96 (L)


Satin finish ABS thermoplastic one-piececover, 3 mm thick.Dimensions: 258 x 145 x 138 mm.

SATIN FINISH ABS

MO4ACSUNITS PER BOX: 12



Bright finish ABS thermoplastic one-piece cover, 3 mm thick.Dimensions: 258 x 145 x 138 mm.

BRIGHT FINISH ABS

MO4ACUNITS PER BOX: 12


• Cover fixed to the base by means of 2 vandal-prooflock screws.

• Thermoplastic PP + talcum base, with 4 Ø 6 mmholes for wall mounting.

• Universal brush motor, 15000 rpm, B class,includes a self-resetable safety thermal cut-off at 100 ºC.

• PP UL94-V0 helicoidal fan wheel.• Waved wire NiCr heating element that incorporates

a self-resetable safety thermal cut-off at 95 ºC.• Adjustable IR electronic detection sensor.• Sensors come with a polycarbonate viewing window.


Hair dryersSaniflow dryers:• Long-lasting, compact units with anti-vandalism features• Minimum maintenance• High air velocity to ensure quick drying• Cover comes in cast iron for maximum resistance• First class component qualityTo be installed in high traffic areas: swimming pools,gymnasiums…

Smartflow dryerUnique points• High air velocity which permits a short drying time.• Safety system which disconnects the dryer after 15 minutes

of continuous working• Isolated tube and handle• Comfortable use by a ABS handset with thermal isolation

for comfortable use at all times.• First class component qualityTo be installed in hotel rooms

2627


Hair

drye

rs •

Hea

vy d

uty

appl

icat

ion

• Cast iron one-piece cover white porcelain enamelledcoating, 6 mm thick. Cover fixed to the base by meansof 2 vandal-proof lock screws and lock with specialSaniflow® wrench.

• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holesfor wall mounting.

• Fire resistant plastic UL 94-VO fan scroll.• Universal brush motor, 5500 rpm, F class, incorporates

a self-resetable safety thermal cut-off at 120 ºC.


255 mm(10”)

282 mm(11-1/8”)

244 mm(9-5/8”)

Voltage 220 - 240 V Total power 2250 WFrequency 50/ 60 Hz Motor power 250 WElectrical Class I Heating element 2000 Wisolation powerConsumption 10 A RPM 5500Weight 11,5 Kg Air temperature 53 ºCEffective 330 m3/h (at 10 cm distanceairflow 5500 l/min at 21 ºC)Air velocity 96 Km/h Noise level (at 2 m) 70 dBDrying cycle 90 seconds Protection level IP21

255 mm(10”)

244 mm(9-5/8”)

SC0085H

SANIFLOWPUSH-BUTTON


SC0085HTUNITS PER BOX: 1

UNITS PER PALLET: 18 (F)

SANIFLOW PUSH-BUTTONWITH TUBE

215 mm(9-5/8”)

255 mm(10”)

Voltage 220 - 240 V Total power 1000 WFrequency 50/ 60 Hz Motor power 250 WElectrical Class I Heating element 750 Wisolation powerConsumption 4,5 A RPM 5500Weight 11,8 Kg Air temperature 65 ºCEffective 145 m3/h (at 10 cm distanceairflow 2420 l/min at 21 ºC)Air velocity 65 Km/h Noise level (at 2 m)70 dBLength of the hose 1000-2500 mm Protection level IP21

255 mm(10”)

344 mm(13-1/2”)

• Aluminium centrifugal double symmetrical inlet fanwheel.

• Waved wire NiCr heating element on a mica framethat incorporates a self-resetable thermal cut-off at80 ºC.

• Nozzle in chrome plated zamak, 22 m thick.• Push -button in chrome plated zamak, 22 m thick, that

activates an electromechanical timer with a 90 secondscycle.

• Ask for the modelswith steel cover

Hair dryers for heavy duty application

• White ABS ergonomichandset and fitting.Polyurethane white hose.


Hair dryers for hotel rooms

SMARTFLOWAUTOMATIC

SC0004UNITS PER BOX: 1

UNITS PER PALLET: 56 (C)

PUSH-BUTTONWITH PLUG

SC0010/SC0010CSUNITS PER BOX: 12

UNITS PER PALLET: 192 (N)

NEW

Voltage 220 V Total power 540 - 1200 WFrequency 50 Hz Motor power 40 WElectrical isolation Class II Heating element power 1200 WConsumption 2,7 - 4,9 A RPM 7500 - 10000Weight 0,7 Kg Aire velocity 54 Km/hEffective airflow 1217 l/min Air temp. 61º C

73 m3/h (at 10 cm distance at 21ºC)Installation height 1300-1500 mm Noise level (at 2 m) 60 dBCord length 650-1500 mm

150 mm(5-29/32”)

75 mm(2-15/16”)

90 mm(3-17/32”)

210 mm(8-1/4”)

Voltage 220-240 V Total power 700 W

Frequency 50/60 Hz Motor power 150 W

Electrical Class II Heating element power 550 Wisolation Length of the hose 800-2000 mmConsumption 3 A RPM 15.000Weight 1,8 Kg Air velocity 79 Km/h

Effective 40 m3/h - Air temperature 60º Cairflow 667 l/min (at 10 cm distance at 21ºC)

138 mm(5-3/8”)

258 mm(10-1/8”)

196 mm(7-3/4”) 50 mm

(2”)

290 mm(11-3/8”)

510 mm(20-1/8”)

250 mm(9-7/8”)

• Also availablewith cord andplug. Model SC1004

• White ABS thermoplastic one-piece cover, 3 mm thick.Cover fixed to the base by means of 2 metal sheet screws.

• Thermoplastic PP + talcum base, with 4 Ø 6 mm holesfor wall mounting.

• Universal brush motor, 15000 rpm, B class, includesa self-resetable safety thermal cut-off.

• PP UL94-V0 helicoidal fan wheel.• Waved NiCr wire heating element that incorporates

a self-resetable safety thermal cut-off.• Polyurethane white extensible hose fixed to revolving

supports, which avoid the hose roll up.• White ABS handset with a thermal protector inside.• White ABS support and fitting.


NEW

• White/Black metal-like, ABS hand piece whichincorporates a polypropylene airconcentrator and ON/OFFswitch.

• Cable and plug from the holder,• Spiral cord, 650-1800 m length, from the holder to

the hand piece.• Wall-mounted holder for permanent installation,

incorporates 2 holes for mounting on the wall.• Two speed settings• Motor, 7500-10000 rpm, includes a thermal overload

switch.• Polycarbonate turbine.


210 mm(8-1/4”)

112 mm(4-1/3”)

215 mm(8-15/32”)

95 mm(3-3/4”)

Unique points• Choice in three different finishes: stainless steel, white epoxy,

bright and satin finish• First class material, including stainless steel lock to avoid

corrosion• Anti-dripping and anti-corrosion valve• Thermoplastic container, 3 mm thick• Access to its interior using a standard mediclinics® key supplied• Maximal convenience, suitable for all type of soaps,

except for surgical soaps• Housing with 1 viewing slot to show when the refill is required

To be installed in all areas: in motorway service stations, hotels,engineering companies, garage and transport, leisure andcommunity centers...

Soap dispensers medigel

Soap

dis

pens

ers

• St

ainl

ess

stee

l AIS

I 304

3031Soap dispensers stainless steel AISI 304

117 mm(4-5/8”)

206 mm(8-1/8”)

116 mm(4-5/8”)




DJ0030CS

• Stainless steel AISI 304 body, top fillinglid and push-button, 0,8 mm thick,satin finish.




DJ0030C

• Stainless steel AISI 304 body, top fillinglid and push-button, 0,8 mm thick,bright finish.


Capacity 1,1 L

Weight(empty) 1,0 Kg

Liquid soaps All, except forallowed surgical soaps

Quantity dispenser 1 - 1,2 mlper pulsation

Operable force 26 N

Push-button Stainless steel

Container Termoplastic

Recommended 15 - 20 cminstallation height from shelf


STAINLESS STEEL AISI 304WHITE EPOXY

DJ0030

• Stainless steel AISI 304 body, top fillinglid and push-button, 0,8 mm thick,white epoxy.


• It is mounted on the wall by means of 4 wood screws withtheir corresponding 5 mm wall plugs; the lower ones attachthe dispenser, whilst the upper ones fix it to the wall.

Screws and wall plugs are provided.• Anti-dripping and anti-corrosion valve. Design based on a

polyamide piston with 2 elastomeric toroidal gaskets, siliconeblocking pivot and stainless steel ball to ensure tightness.

• Thermoplastic container, 3 mm thick.• Access to its interior using a standard mediclinics®

key supplied.• Stainless steel AISI 302 springs.• Frontal window indicates refill time

Soap dispensers thermoplastic


LAVATORY MOUNTEDCHROMED BRASS

DJT118UNITS PER BOX: 10

UNITS PER PALLET: 200 (O)

AUTOMATICALUMINIUM

DJ0160AS

107 mm(4-1/4”)

108 mm(4-1/4”)

204 mm(8”)

Capacity 0,85 LWeight (empty) 0,425 KgLiquid soaps allowed All except for

surgical soapsQuantity dispensed /pulsation 1 mlOperable force 20 NDiameter hole Ø 25 mmEscutcheon Ø 50 mmScrew shank high 118 mm

88 mm(3-7/16”)

70 mm(2-3/4”)

21 mm(13-16”)

216 mm(8-1/2”)

87 mm(2-5/8”)

141 mm(5-9/16”)

15 mm(5-8”)

• Shatter-resistant polyethylene container.To be installed in 25 mm diameter incountertops adjacent to lavatories. Refilledby using the special refilled key to unlockthe escutcheon and remove the valve bodywith dip tube from the shank.

• Chromed brass press piston and spout,bright polished finish, 88 mm long.

• Black high impact resistant ABS screwshank with basin nut.

• Pushing down ABS valve with ABS cylinder,NBR spout and stainless steel spring.

• High impact resistant stainless steel AISI304 escutcheon, bright finish.




ABSWHITE/BLACK

DJ0010F/DJ0020F


• Thermoplastic SAN container, 3 mm thick,fumé colour. White/Black ABS top filling lid,and push-button.

• It is mounted on the wall by means of 4 woodscrews with their corresponding 5 mm wallplugs; the lower ones attach the dispenser,whilst the upper ones fix it to the wall.Screws and wall plugs are provided.

• Anti-dripping and anti-corrosion valve. Designbased on a polyamide piston with 2elastomeric toroidal gaskets, silicone blockingpivot and stainless steel ball to ensuretightness.

• To refill, the lid is opened using a standardmediclinics® key supplied.

• Stainless steel AISI 302 springs.


• Thermoplastic ABS body with a 0.5 mmaluminium frame, in shiny silver and black.

• Elastomeric valve.• Polyethylene soap deposit with a 0.8L capacity.• Control circuit with infrared detectors to trigger

the soap dispenser on nearing the hands,powered by 6 1.5V batteries (6 V DC).

• Adjustable triggering distance.• Transparent plastic content viewer

(polycarbonate) on the front.• Security lock.• All surfaces are flat, therefore easy to clean

inside and out.• Allows for 150,000 cycles of use.• For liquid skin soaps and medium-viscosity

soap/lotions.


surgical soapsQuantity dispensed /pulsation 1 - 2 mlConsumption 6 Batteries 1,5 VMinimum 15 - 20 cminstallation height from shelf


surgical soapsQuantity dispensed /pulsation 1 - 1,2 mlOperable force 26 NPush-button ABSRecommended 15 - 20 cminstallation height from shelf

118 mm(4-2/3”)

265

mm

(10-

3/7”

)

110 mm(4-1/3”)

NEW

3233

Soap

dis

pens

ers

• Th

erm

opla

stic

/ Re

com

men

ded

soap

s

RECOMMENDED SOAPS

• Liquid soaps for skin.

• Lotion soaps with medium viscosity.

• Avoid granulated soaps or pastes.

• Collective use .

• Industrial use.

• Food use.

• Avoid sanitary use which demand bacterial ingredients.

• Liquid.

• Avoid excessively thick or sticky soaps.

• Tens actives.

• Natural oils and vegetable oils.

• Fatty acids.

• Avoid Iodine soaps or soaps containing PCMX or tricosan.

VISCOSITY DENSITY PH

TYPE USE

FORM CONTENT

1 - 10.000 cps. 1.02 - 1.05 gr/cc. 5 - 8

Recommended soaps

visit our home page www.mediclinics.com

For industrial rollUnique points• Compact dispenser, fully sealed body• Back wall construction guaranteeing ventilation between wall and dispenser• The slots in the inside of the body avoid the screws damaging the toilet paper• Lock system with standard mediclinics® key• Inertial anti-spin retainer• Maximal convenience, the axis allows the use of a standard paper roll in case

of need• Frontal window indicates refill time• Maintenance free, easy to keep cleanTo be installed in high traffic areas. Ideal for airports, petrol stations, discos,schools, universities, stadiums, parks…

For standard rollUnique points• Compact dispensers, fully sealed body• Back wall construction guaranteeing ventilation between wall and dispenser• The slots in the inside of the body avoid the screws damaging the toilet paper• Lock system with standard mediclinics® key• Maximal convenience, the extra tissue rolls descend when the previous one

has been finished, by a simple hand manipulation through the side window.There is no need to open the lid for the removal of consumed rolls

• Frontal sight-hole and slots on each side of body indicate refill time• Maintenance free, easy to keep cleanTo be installed in medium traffic areas. Ideal for restaurants, theatres,cinemas, hotels, offices…

Toilet paper dispensers

3435Toilet paper dispensers, industrial roll

Toile

t pap

er d

ispe

nser

s •

Indu

stia

l rol

l

• Fully sealed one-piece body. With a catch system to prevent theopening of the door. The supports of the screws in the back ofthe appliance, are acting as an anti-moisture support, as well asslots to avoid the screws damaging the toilet paper.

• It is mounted on the wall by means of 3 wood screws with theircorresponding 5 mm wall plugs. It includes a lock system withstandard mediclinics® key, that allows opening the lid forreplenishment.

• Axis, 0,8 mm thick, for standard 45 mm paper roll tube, withinertial anti-spin retainer. The axis allows the use of a standardpaper roll in case of need.

• One-piece seamless lid, 0,8 mm thick, fully sealed. Fixed to thebody by means of rivets that allows swinging down of the lid forthe replenishment.

• Frontal window indicates refill time.

Components & Materials Components & Materials

• Steel one-piece body and lid, 0,8 mmthick, white epoxy.

• Stainless steel AISI 304 one-piece bodyand lid, 0,8 mm thick, bright finish.

• Stainless steel AISI 304 one-piece bodyand lid, 0,8 mm thick, satin finish.



1 layer paper roll capacity PR0787/C/CS 400 mPR0783/C/CS 250/300 m

2 layer paper roll capacity PR0787/C/CS 300 mPR0783/C/CS 180 m

Weight (empty) PR0787/C/CS 1,75 KgPR0783/C/CS 1,3 Kg

Paper roll diameter PR0787/C/CS 274 mm Ø maxPR0783/C/CS 230 mm Ø max

Paper roll width 115 mm maximum

Paper roll tube diameter 45 mm minimum

Recommended installation height 65 - 75 cm to the bottom

Installation height 70 cm to the bottomfor disabled people

STEELWHITE EPOXY

STAINLEES STEEL AISI 304SATIN FINISH

STAINLEES STEEL AISI 304BRIGHT FINISH

PR0787 PR0787CSPR0787C400 M 400 M400 M




PR0783 PR0783CSPR0783C250/300 M 250/300 M250/300 M




250 mm(9-7/8”)

125 mm(5”)

250 mm(9-7/8”)

160 mm(6-1/4”)

138 mm(5-3/8”)

ø 5 mm(1/4”)

ø 250 mm(9-7/8”)

300 mm(11-3/4”)

123 mm(4-7/8”)

307 mm(12-1/8”)

160 mm(6-1/4”)

138 mm(5-3/8”)

ø 5 mm(1/4”)

ø 300 mm(11-7/8”)

• PR0787/C/CS

• PR0783/C/CS


Components & Materials Components & MaterialsComponents & Materials

Toilet paper roll capacity PR0781/C/CS 3 unitsPR0784/C/CS 2 units

Weight (empty) PR0781/C/CS 1,3 KgPR0784/C/CS 0,9 Kg

Paper roll diameter 105 - 125 mm Ø maximum

Paper roll width 110 mm maximum

Recommended installation height 65 - 75 cm to the bottom

Installation height for disabled people 70 cm to the bottom

• Fully sealed one-piece body. The supports of the screws in theback of the appliance, are acting as an anti-moisture support,as well as slots to avoid the screws damaging the toilet paper.


• One-piece seamless lid, 0,8 mm thick. Fixed to the body by meansof 2 rivets that allows swinging of the lid for the replenishmentthrough the top opening. The extra tissue rolls descend whenthe previous one has been finished, by a simple handmanipulation through the side window. There is no need toopen the lid for the removal of consumed rolls.

• Frontal sight-hole and slots on each side of body indicaterefill time.

STEELWHITE EPOXY



PR0781 PR0781CSPR0781CTRIPLE STANDARD ROLL TRIPLE STANDARD ROLLTRIPLE STANDARD ROLL




PR0784 PR0784CSPR0784CDOUBLE STANDARD ROLL DOUBLE STANDARD ROLLDOUBLE STANDARD ROLL




Toilet paper dispensers, standard roll

273 mm(10-3/4”)

60 mm(2-3/8”)

380 mm(15”)

130 mm(5-1/8”)

116 mm(4-9/16”)

380 mm(15”)

130 mm(5-1/8”)

185 mm(7-1/4”)

60 mm(2-3/8”)

290 mm(11-3/8”)

130 mm(5-1/8”)

116 mm(4-5/8”)

290 mm(11-3/8”)

130 mm(5-1/8”)

• PR0781/C/CS

• PR0784/C/CS




3637Toilet paper dispensers, industrial and standard rolls

Toile

t pap

er d

ispe

nser

s •

Indu

stria

l and

sta

ndar

d ro

lls

Components & Materials Components & MaterialsComponents & Materials

STEELWHITE EPOXY

PR0789FOR INDUSTRIAL

OR THREE STANDARD ROLLS



PR0789CSFOR INDUSTRIAL




PR0789CFOR INDUSTRIAL



1 layer paper roll capacity2 layer paper roll capacityWeight (empty)Paper roll diameterPaper roll widthPaper roll tube diameterRecommended installation heightInstallation heightfor disabled people


400 m300 m1,75 Kg274 mm Ø maximum115 mm maximum45 mm minimum65 - 75 cm to the bottom70 cm to the bottom

Toilet paper roll capacityWeight (empty)Paper roll diameterPaper roll widthRecommended installation heightInstallation heightfor disabled people

3 units1,75 Kg105 - 125 mm Ø maximum110 mm maximum65 - 75 cm to the bottom70 cm to the bottom

• Axis system for industrial rolls • Axis system for standard rolls and coreless standard rolls




105,5 mm(4-1/8”)

112,5 mm(4-7/16”)

108

mm

(4-1

/4”)

• For outside dimensions see model PR0787

• For outside dimensions see model PR0787

40 mm(1-1/2”)

Ø 19

2 m

m(7

-1/2

”)

99,6 mm(3-15/16”)

85 mm(3-3/8”)

• Fully sealed one-piece body with a with a catch system to preventthe opening of the door. The supports of the screws in the backof the appliance, are acting as an anti-moisture support, as wellas slots to avoid the screws damaging the toilet paper.


• Modular axis system in thermoplastic. The system consists oftwo different axis that allow the use of three different types ofrolls: industrial roll, standard roll and coreless standard roll.

• Axis fixed to the body by means of a “click” system which permitsits easy replacement.

• The axis for industrial roll includes an anti-spin retainer.

• Using standard roll, the extra tissue roll descends when theprevious one has been finished.

• One-piece seamless lid, 0,8 mm thick, fully sealed. Fixed to thebody by means of rivets that allows swinging down of the lid forthe replenishment.

• Frontal window indicates refill time.

Unique points• Perfectly welded body• Back wall construction guaranteeing ventilation between

wall and dispenser• Robust and vandal resistant• The slots in the inside of the body avoid the screws damaging

the paper towels• Lock with standard mediclinics® key• A frontal window indicates refill time• Maximal convenience, suitable for most common

paper types available in the market• Maintenance free, easy to keep clean

To be installed in all traffic areas. Ideal for restaurants,theatres, cinemas, hotels, offices…

Paper towel dispensers

• Perfectly welded body. The support of the screws in the back ofthe appliance are acting as an anti-moisture support, as well asallowing an easy adjustment to the wall. The slots in the insideof the body avoid the screws damaging the paper towels. Theopening presents edged borders in order to avoid tearing of papertowels.

• It is mounted on the wall by means of 4 wood screws with theircorresponding 5 mm wall plugs.

• One-piece lid, 0,8 mm thick. Fixed to the body by meansof 2 rivets. It includes a lock with standard mediclinics® key,that allows swinging down of lid for replenishment.

• A frontal window indicates refill time.

DT0106UNITS PER BOX: 6

UNITS PER PALLET: 48 (D)

STEELWHITE EPOXY

DT0106CS


Pape

r tow

el d

ispe

nser

s

Components & Materials Components & Materials Components & Materials

3839Paper towel dispensers

DT0106/C/CS C-fold towels 400 unitscapacity

Multifold (Z-fold) 600 unitstowels capacity

Weight (empty) 1,8 Kg

Towels 100 x 260 mm maximum

Recommended installation 130 - 160 cmheight to the bottom

Installation height for 85 - 120 cmdisabled people to the bottom


330 mm(13”)

133 mm(5-1/4”)

133 mm(5-1/4”)

330 mm(13”)

210 mm(8-1/4”)

275 mm(10-7/8”)

DT0106C

STAINLESS STEEL AISI 304 BRIGHT FINISH

UNITS PER BOX: 6UNITS PER PALLET: 48 (D)





170 mm(6-3/4”)

Multi-purpose cabinets

DTE0050CSUNITS PER BOX: 1



• Stainless steel AISI 304 body,0.8 mm thick, satin finish.Completely welded construction.

• Stainless steel AISI 304 one-piecedoor, 1.2 mm thick, satin finish.Secured to cabinet with afull-length stainless steelpiano-hinge. Equipped withtwo locks anti-vandal keyed.

• Stainless steel AISI 304 papertowel dispenser, 0.8 mm thick,satin finish. Rounded towel trayhas hemmed opening to dispensertowels without tearing. Suitablefor C-fold or multifold papertowels.

• Stainless steel AISI 304 wastereceptacle, 0.8 mm thick.Capacity: 17,2 L.


C-fold towel capacity 600 unitsZ-fold towels capacity 800 unitsWeight (empty) 14,1 KgTowels 100 x 260 mm max.

DTES0040CSUNITS PER BOX: 1



• Stainless steel AISI 304 body,0.8 mm thick, satin finish.Completely welded construction.

• Stainless steel AISI 304three-piece door, 1.2 mm thick,satin finish. Secured to cabinetwith a full-length stainless steelpiano-hinge. Equipped with twolocks anti-vandal keyed.

• Stainless steel AISI 304 papertowel dispenser, 0.8 mm thick,satin finish. Rounded towel trayhas hemmed opening to dispensertowels without tearing. Suitablefor C-fold or multifold papertowels.

• Hand dryer type Saniflow,automatic version. Nozzle inchromed plated zamak, 22 thick.IR sensor with PC viewing screen.

• Stainless steel AISI 304 wastereceptacle, 0.8 mm thick.Capacity: 35,5 L.

C-fold towel capacity 300 unitsZ-fold towels capacity 500 unitsTowels 100 x 260 mm max.Voltage 220 - 240 VFrequency 50/60 Hz Electrical Class IisolationConsumption 10 AEffective 330 m3/hairflow 5500 l/minAir velocity 96 Km/hDrying time 29 secTotal power 2250 WMotor 250 WHeating element 2000 WRPM 5500Air temperature 53 ºC(at 10 cm distance at 21ºC)Noise level (at 2 m) 70 dBWeight (empty) 21,85 KgRecommendedinstallation height 10 - 15 cm

Recommendedinstallation height 167 - 185 cm

Installation heightfor disabled people 152 cm

• Also available in surface mounting version

330 mm(13”)

1400 mm(55-1/8”)

285 mm(11-1/4”)

154 mm(6-1/16”)

140 mm(5-1/2”)

1355 mm(53-3/4”)

14 mm(1/2”)

330 mm(13”)

1660 mm(65-3/4”)

285 mm(11-1/4”)

1060 mm(63-1/4”)

1610 mm(63-1/8”)

170 mm(6-11/16”)

16 mm(5/8”)

87 mm(3-7/16”)

186 mm(7-5/16”)

• For specific projects ask for an updated data sheet

4041Cleaning stainless steel

GENERAL RECOMMENDATIONS

Cleaning agent Procedure

• Liquid soap or detergent.• Water-soluble household cleaners, diluted as

recommended on label.

• Wipe on with soft cloth or sponge.• Spray or wipe on, rub spots with soft cloth or sponge.

CONDITION: SPOTS, FINGERPRINTS


• Water-soluble household cleaners, full strength.• Liquid or cream metal polish made for stainless steel,

chrome, copper or brass.

• Spray or wipe on, rub spots with soft cloth or sponge.• As recommended by manufacturer.

CONDITION: STUBBORN SPOTS, ATMOSPHERIC DISCOLORATION


• Liquid or cream metal polish made for stainless steel,chrome, copper or brass.

• Cleaner/degreaser based on butyl cellosolve.

• As recommended by manufacturer.

• As recommended by manufacturer.

CONDITION: MINERAL DEPOSIT OR SCALE FROM HARD WATER


• Commercial solvents for lime, based on phosphonic andacetic acids.

• 5% acetic acid ( white vinegar ).

• Apply liberally, allow to stand for a few minutes; scrub withcoarse toweling or soft britstle brush in direction of grain;rinse well with water.

CONDITION: “RUST” SPOTS(CORROSION FROM CONTACT WITH CHLORINE BLEACH OR HYDROCHLORIC OR MURIATIC ACID)


• Appropiate overall cleaner listed above, plus 150/180 gritemery paper, 3M Scotch Brite pad #7447, fine grade orequivalent.

• Clean surface as above, then rub stained area lighttly withemery paper, polish with Scotch Brite pad.

• Rub only with the grain of satin finishes. Do not use onbright polished surface.

ALWAYS • Scrub and polish with the grain of satin finish.• Remove residue of any cleaning product with water and wipe dry with clean cloth or paper.

NEVER • Allow products containing chloride bleach, hydrochloric or muriatic acid to come in contact with stainless steel. These are frequently found in toilet bowl or tile cleansers and in abrasive scrubbing powders.• Use steel wool which can leave behind fine particles that will rust on the surface.• Use petroleum based solvents wich will leave an oily residue.• Use any abrasives on stainless steel that is bright polished or has been given brozentone or brass finish.

CONDITION: ROUTINE CLEANING

Pape

r tow

el d

ispe

nser

s •

Mul

ti-pu

rpos

e ca

bine

ts /

Clea

ning

sta

inle

ss s

teel

Centre feed dispensers• Suitable for rolls with maximal dimensions 250 x 230 mm, which permit

more hand dryings per case than most other centre-pull systems• Sliding door optimizes the space requirement• With interior support to hold the paper roll• The paper roll is safely protected against splash water• The door includes a recessed grip for easy opening and closing• Optional lock system with standard mediclinics® key• Maintenance free, easy to keep clean

To be installed in all areas. Ideal for industrial kitchens,hospitals, food industry, solariums, workshops, garages...

Centre feed dispensers

• Steel one-piece body and door, 0,8 mmthick, white epoxy.

• Stainless steel AISI 304 one-piece bodyand door, 0,8 mm thick, bright finish.

• Stainless steel AISI 304 one-piece bodyand door, 0,8 mm thick, satin finish.

Cent

re fe

ed d

ispe

nser

s

4243Centre feed dispensers


261 mm(10-5/16”) 261 mm

(10-5/16”)

365 mm(14-3/8”)

261 mm(10-5/16”)

Weight (empty) 3,1 Kg

Paper roll diameter 250 mm maximum

Paper roll height 210 mm maximum

Recommended installation 130 - 160 cm to the bottomheight

Installation height for 85 - 120 cm to the bottomdisabled people

DT0303/C/CS

• One-piece body with internal slots for water drainage.• It is mounted on the wall by means of 4 wood screws with their

corresponding 6 mm wall plugs.• One-piece door. The door includes a recessed grip for easy

opening and closing. The door slices from right to the left bymeans of a two rings which rote concentrically.

• One-piece basis. Welded to the body. It includes a teeth openingfor the paper.

• High density polyethylene ring placed over the basis witha slot to put out the paper. It incorporates a retainer to optimizethe paper quantity dispenser.

• Optional lock system with standard mediclinics® key.

DT0303CS

STAINLESS STEEL AISI 304 SATIN FINISH


DT0303UNITS PER BOX: 1

UNITS PER PALLET: 48 (M)

STEELWHITE EPOXY


DT0303C

STAINLESS STEEL AISI 304 BRIGHT FINISH


UNITS PER BOX: 1UNITS PER PALLET: 48 (M)

UNITS PER BOX: 1UNITS PER PALLET: 48 (M)

Unique points65 /80 L• Compact receptacle, one-piece manufactured fully sealed• For wall mounting or floor standing• Available with bag-holder• 4 thermoplastic feet to isolated the bottom from moisture• Impact and noises dampening rubber bumpers• Available in different colors to be used for waste recycling• Maintenance free, easy to keep cleanTo be installed in high traffic areas. Ideal for airports, petrol stations,schools, universities, stadiums...

55/ 75 L• 4 thermoplastic feet to isolated the bottom from moisture• Available with removable ashtray• The top retains the waste bag in its place• Maintenance free, easy to keep cleanTo be installed in high traffic areas. Ideal for airports, petrol stations,schools, universities, stadiums...

25 L• Compact receptacle, one-piece manufactured fully sealed• For wall mounting or floor standing• Available with bag-holder• Maintenance free, easy to keep cleanTo be installed in high-medium traffic areas. Ideal for airports,petrol stations, schools, universities, stadiums...

Sanitary napkin disposal bin• For wall mounting or floor standing• Let easy open• Available with bag-holder• Maintenance free, easy to keep cleanTo be installed in all areas. Ideal for airports,petrol stations, schools, universities, stadiums...

Waste receptacles

4445Waste receptacle with self-closing lid

Weight (empty) PP0065/C/CS 8,4 Kg Weight (empty) PP0080/C/CS 9,8 Kg

354 mm(13-15/16”)

250 mm(9-7/8”)

300 mm(11-3/4”)

820 mm(32-1/4”)



• Steel white epoxy coated body, 1,1 mm thick.One-piece manufactured, fully sealed. Forstanding on the floor or wall mounting bymeans of 3 slot holes drilled on the back ofthe appliance.

• Steel white epoxy coated top, 1,3 mm thick.• Steel white epoxy coated lid, 1,5 mm thick,

manually operated. It incorporates impactand noise dampening rubber bumpers, aswell as a spring for automatic return.

• Retaining system on the inside of the bodyto secure the disposable waste bag.

• Black thermoplastic feet, 4 units, that isolatesthe bottom of the waste receptacle frommoisture.

• Stainless steel AISI 304 body, 0,8 mm thick,bright finish. One-piece manufactured, fullysealed. For standing on the floor or wallmounting by means of 3 slot holes drilledon the back of the appliance.

• Stainless steel AISI 304 top, 1 mm thick,bright finish.

• Stainless steel AISI 304 lid, 1,2 mm thick,bright finish, manually operated. Itincorporates impact and noise dampeningrubber bumpers, as well as a spring forautomatic return.



• Stainless steel AISI 304 body, 0,8 mm thick,satin finish. One-piece manufactured, fullysealed. For standing on the floor or wallmounting by means of 3 slot holes drilledon the back of the appliance.

• Stainless steel AISI 304 top, 1 mm thick,satin finish.

• Stainless steel AISI 304 lid, 1,2 mm thick,satin finish, manually operated. Itincorporates impact and noise dampeningrubber bumpers, as well as a spring forautomatic return.




Available with bag-holder

STEELWHITE EPOXY

PP0065CAPACITY 65 L


PP0080CAPACITY 80 L



PP0065CSCAPACITY 65 L





PP0065CCAPACITY 65 L




354 mm(13-15/16”)

670 mm(26-3/8”)

300 mm(11-3/4”)

250 mm(9-7/8”)

Was

te re

cept

acle

s •

Self-

clos

ing

lid

Waste receptacles

600 mm(23-5/8”)

300 mm(11-3/4”)

350 mm(13-3/4”)

Weight (empty) PP1065/C/CS 7,0 Kg

300 mm(11-3/4”)

350 mm(13-3/4”)

750 mm(29-1/2”)

Weight (empty) PP1080/C/CS 8,4 Kg



• Steel white epoxy coated body, 1,1 mmthick. One-piece manufactured, fullysealed. For floor standing or wallmounting by means of 3 slot holes drilledon the back of the appliance.


• Black thermoplastic feet, 4 units, thatisolates the bottom of the waste receptaclefrom moisture.

• Stainless steel AISI 304 body, 0,8 mmthick, bright finish. One-piecemanufactured, fully sealed. For floorstanding or wall mounting by meansof 3 slot holes drilled on the back of theappliance.

• Retaining system on the inside of thebody to secure the disposable waste bag.

• Black thermoplastic feet, 4 units, thatisolates the bottom of the wastereceptacle from moisture.

• Stainless steel AISI 304 body, 0,8 mmthick, satin finish. One-piecemanufactured, fully sealed. For floorstanding or wall mounting by meansof 3 slot holes drilled on the back of theappliance.

• Retaining system on the inside of thebody to secure the disposable waste bag.

• Black thermoplastic feet, 4 units, thatisolates the bottom of the wastereceptacle from moisture.


Available with bag-holder

STEELWHITE EPOXY

PP1065CAPACITY 65 L


PP1080CAPACITY 80 L












4647


Waste receptacles with swing top/ ashtray

Was

te re

cept

acle

s •

With

out l

id /

Swin

g to

p

• Steel white epoxy coated body, 1 mm thick. One-piecemanufactured. For standing on the floor.

• Steel grey epoxy-polyester coated top, 1 mm thick with swinglid manually operated. The top retains the waste bag in itsplace.

• Black thermoplastic feet, 4 units, that isolates the bottomof the waste receptacle from moisture.

• Steel white epoxy coated body, 1 mm thick. One-piecemanufactured. For standing on the floor.

• Steel grey epoxy-polyester coated top, 1 mm thick with swinglid manually operated. The top retains the waste bag in itsplace.

• Removable ashtray in black colour located on the top.• Black thermoplastic feet, 4 units, that isolates the bottom

of the waste receptacle from moisture.


687 mm(27”)

258 mm(9-7/8”)

328 mm(12-7/8”)308 mm

(12-1/8”)

933 mm(36-3/4”)

258 mm(9-7/8”)

328 mm(12-7/8”)308 mm

(12-1/8”)

258 mm(9-7/8”)

687 mm(27”)

152 mm(12-5/8”)

328 mm(12-7/8”)

328 mm(12-7/8”) 152 mm

(12-5/8”)

933 mm(36-3/4”)

258 mm(9-7/8”)

Weight (empty) PP0985 9,2 Kg

PP0986 11,5 Kg

Weight (empty) PP0987 9,2 Kg

PP0988 11,5 Kg


PP0985CAPACITY 55 L


PP0986CAPACITY 75 L


STEEL WHITE EPOXYSWING TOP

STEEL WHITE EPOXYSWING TOP + ASHTRAY

PP0987CAPACITY 55 L


PP0988CAPACITY 75 L


Rectangular waste receptacles

355 mm(14”)

460 mm(18-1/8”)

155 mm(6-1/8”)


PP0279UNITS PER BOX: 1

UNITS PER PALLET: 32 (E)

STEELWHITE EPOXY

PP0279CSUNITS PER BOX: 1



PP0279CUNITS PER BOX: 1




• Steel white epoxy coated body, 1 mmthick. One-piece manufactured, fullysealed.

• For standing on the floor or wallmounting by means of 4 slot holes drilledon the back of the appliance.

• Stainless steel AISI 304 body, 1 mmthick, bright finish. One-piecemanufactured, fully sealed.


• Stainless steel AISI 304 body, 1 mmthick, satin finish. One-piecemanufactured, fully sealed.



Waste PP0279/C/CS Weight (empty) 3,5 Kg Capacity 25 L

CAPACITY 25 L CAPACITY 25 L CAPACITY 25 L

• Available with bag-holder

355 mm(14”)

155 mm(6-1/8”)

280 mm(11”)

460 mm(18-1/8”)

Sanitary napkin disposal bins

Was

te re

cept

acle

s •

Rect

angu

lar /

San

itary

nap

kin

disp

osal

bin

s

230 mm(9”)

290 mm(11-3/8”)

102 mm(4”)


PP0006UNITS PER BOX: 1


STEELWHITE EPOXY

PP0006CSUNITS PER BOX: 1


STAINLESS STEEL AISI 304 SATIN FINISH

PP0006CUNITS PER BOX: 1



• Steel white epoxy coated body, 1,1 mm thick.• For standing on the floor or wall mounting

by means of 2 slot holes press-formedon the back of the appliance.

• Steel white epoxy coated lid, 1,1 mmthick, seamless one-piece manufactured.It protrudes 3,5 mm off the body to easethe opening. Attached to the body bymeans of two semi-axes that permit thelid rotation.

• Stainless steel AISI 304 body, 0,8 mmthick, bright finish.

• For standing on the floor or wallmounting by means of 2 slot holespress-formed on the back of theappliance.

• Stainless steel AISI 304 lid, 0,8 mm thick,bright finish, seamless one-piecemanufactured. It protrudes 3,5 mm offthe body to ease the opening. Attachedto the body by means of two semi-axesthat permit the lid rotation.

• Stainless steel AISI 304 body, 0,8 mmthick, satin finish.

• For standing on the floor or wallmounting by means of 2 slot holespress-formed on the back of theappliance.

• Stainless steel AISI 304 lid, 0,8 mm thick,satin finish, seamless one-piecemanufactured. It protrudes 3,5 mm offthe body to ease the opening. Attachedto the body by means of two semi-axesthat permit the lid rotation.

Waste PP0006/C/CS Weight (empty) 1,5 Kg Capacity 6 L

Components & MaterialsComponents & MaterialsComponents & Materials

CAPACITY 6 L CAPACITY 6 L CAPACITY 6 L

• Available with bag-holder

4849

Unique points• All the bars comply with ADA requirements for a free barrier washroom• In all the bars the bending process guarantees the uniformity

of the diameter along the bends• Stainless steel bars are supplied with a snap flange cover to hide

the mounting screws• All the steel bars, epoxy finish and polyamide, have been covered

with an antioxidant treatment, before final finish• Polyamide bars are treatment with non-slipping white Rilsan®,

that gives the bar a nice feel and a high protection against corrosion and scratches

To be installed in all type of washroom which want to bea barrier-free space

Grab bars andaccessories for a barrier-free washroom

ADA

SEE THE TABLEUNITS PER BOX: 1

STEEL WHITE RILSAN®

STRAIGHT BAR


• Steel bar, 1,5 mm thick and Ø 32 mm(outer diameter), coated after antioxidanttreatment with non-slipping whitepolyamide Rilsan®, that gives the bar anice feel and a high protection againstcorrosion and scratches. The bendingprocess guarantees the uniformity of thediameter along the bends.

• Steel mounting flange, 2 units, 3 mm thickand Ø 71,5 mm, coated after antioxidanttreatment with non-slipping whitepolyamide Rilsan®. Incorporates 3 screwsholes of Ø 6 mm for mounting on the wall.

5051Straight grab bars

Grab

bar

s •

Stra

ight


• Stainless steel AISI 304 bar, 1,5 mm thickand Ø 32 mm (outer diameter), satin finish.The bending process guarantees theuniformity of the diameter along the bends.

• Stainless steel AISI 304 mounting flange,2 units, 3 mm thick. Incorporates 2 screwsholes of Ø 6,5 mm for mounting on thewall.

• Stainless steel AISI 304 snap flange cover,2 units, satin finish, 0,8 mm and Ø 81 mm.

BR0300CS

BR0300 / BR0300RB

BR0400CS

BR0400 / BR0400RB

BR0600CS

BR0600

BR0750CS

BR0750 / BR0750RB

BR0900CS

BR0900

Code

Suggestions for mounting

ADA

750-915 mm

430-510 mm

110 mm

1450 mm

750-915 mm


(*)NOTE: The load that the bar withstands depends on the type of the wall and the wall plugs used. Nuts and bolts are not included. The use of stainless steel screws is recommended.

• Dim ± 4%

81 mm(3-3/16”)

70 mm(2-3/4”)

L2

L1

750-915 mm

430-510 mm

450 mm

380 mm110 mm

Satin

Epoxy / Rilsan®

Satin

Epoxy / Rilsan®

Satin

Epoxy

Satin

Epoxy / Rilsan®

Satin

Epoxy

386 mm (15-3/16”)

376,5 mm (14-13/16”)

536 mm (21-1/8”)

526,5 mm (20-3/4”)

691 mm (27-1/4”)

681,5 mm (26-13/16”)

841 mm (33-1/8”)

831,5 mm (32-3/4”)

996 mm (39-1/4”)

986,5 mm (38-13/16”)

305 mm (12”)

305 mm (12”)

455 mm (18”)

455 mm (18”)

610 mm (24”)

610 mm (24”)

760 mm (30”)

760 mm (30”)

915 mm (36”)

915 mm (36”)

Finish Total maximumlength. L1

Length betweenflanges centres. L2

71,5 mm(2-13/16”)

70 mm(2-3/4”)

L2

L1

38 mm

• Satin

• Epoxy / Rilsan®


STAINLESS STEEL AISI 304 SATINSTRAIGHT BAR


STEEL WHITE EPOXYSTRAIGHT BAR


• Steel bar, 1,5 mm thick and Ø 32 mm (outerdiameter), white epoxy-polyester coatedafter antioxidant treatment. The bendingprocess guarantees the uniformity of thediameter along the bends.

• Steel mounting flange, 2 units, 3 mm thickand Ø 71,5 mm, white epoxy-polyestercoated after antioxidant treatment.Incorporates 3 screws holes of Ø 6 mmfor mounting on the wall.


Swing-up grab bars ADA

BG0800RB


SWING-UP BAR

UNITS PER BOX: 1

BG0800

STEEL WHITE EPOXYSWING-UP BAR

UNITS PER BOX: 1

BG0800CS

STAINLESS STEEL AISI 304 SATINSWING-UP BAR

UNITS PER BOX: 1


100 mm(3-7/8”) 735 mm

(28-7/8”)

300 mm(11-3/4”)

• Dim ± 4%

110 mm

110 mm

750-915 mm430-510 mm

750-915 mm380 mm

380 mm

Max. 995 mm

750-915 mm


• Steel bar, 1,5 mm thick and Ø 32 mm(outer diameter), white epoxy-polyestercoated after antioxidant treatment.The bending process guarantees theuniformity of the diameter along thebends. The swinging point is reinforcedby means of a double tube. A hook barfor paper roll holding is incorporated, aswell as a safety anchoring system thatblocks the bar in the vertical position andavoids it falling down accidentally.

• Steel mounting flange, 3 mm thick, whiteepoxy-polyester coated after antioxidanttreatment. Incorporates 6 countersunkscrews holes of Ø 6,5 mm for mountingon the wall.


• Stainless steel AISI 304, 1,5 mm thickand Ø 32 mm (outer diameter), satinfinish. The bending process guaranteesthe uniformity of the diameter along thebends. The swinging point is reinforcedby means of a double tube. A hook barfor paper roll holding is incorporated, aswell as a safety anchoring system thatblocks the bar in the vertical position andavoids it falling down accidentally.

• Stainless steel AISI 304 mounting flange,3 mm thick, satin finish. Incorporates 6countersunk screws holes of Ø 6,5 mmfor mounting on the wall.


• Steel bar, 1,5 mm thick and Ø 32 mm(outer diameter), coated after antioxidanttreatment with non-slipping whitepolyamide Rilsan®, that gives the bar anice feel and a high protection againstcorrosion and scratches. The bendingprocess guarantees the uniformity of thediameter along the bends. The swingingpoint is reinforced by means of a doubletube. A hook bar for paper roll holding isincorporated, as well as a safetyanchoring system that blocks the bar inthe vertical position and avoids it fallingdown accidentally.

• Steel mounting flange, 3 mm thick, coatedafter antioxidant treatment with whitepolyamide Rilsan®. Incorporates 6countersunk screws holes of Ø 6,5 mmfor mounting on the wall.


• Dim ± 4%

5253Wall to floor swing-up grab bars

Grab

bar

s •

Swin

g-up

ADA

BGC710

STEEL WHITE EPOXYSWING-UP BAR

UNITS PER BOX: 1

BGC710CS

STAINLESS STEEL AISI 304 SATINSWING-UP BAR

UNITS PER BOX: 1

• Steel bar, 1,5 mm thick and Ø 32 mm(outer diameter), white epoxy-polyestercoated after antioxidant treatment. Thebending process guarantees the uniformityof the diameter along the bends. Theswinging point is reinforced by means ofa double tube. A hook bar for paper rollholding is incorporated, as well as a safetyanchoring system that blocks the bar in thevertical position and avoids it falling downaccidentally.

• Steel column, white epoxy-polyester coatedafter antioxidant treatment.

• Steel mounting on the floor flange, 5 mmthick, white epoxy-polyester coated afterantioxidant treatment. Incorporates 4 screwsholes of Ø 10 mm for mounting on the floor.

• Steel mounting on the wall flange, 2 mmthick, white epoxy -polyester coated afterantioxidant treatment. Incorporates2 screws holes of Ø 8.5 mm for mountingon the wall.


• Stainless steel AISI 304 bar, 1,5 mm thickand Ø 32 mm (outer diameter), satin finish.The bending process guarantees theuniformity of the diameter along the bends.The swinging point is reinforced by meansof a double tube. A hook bar for paper rollholding is incorporated, as well as a safetyanchoring system that blocks the bar inthe vertical position and avoids it fallingdown accidentally.

• Stainless steel AISI 304 column, satinfinish.

• Stainless steel AISI 304 mounting on thefloor flange, 5 mm thick, satin finish.Incorporates 4 screws holes of Ø 10 mmfor mounting on the floor.

• Stainless steel mounting on the wallflange, 2 mm thick, satin finish.Incorporates 2 screws holesof Ø 8.5 mm for mounting on the wall.


To the wallmountingflange


240 mm(9-1/2”)

600 mm(23-5/8”)

150

mm

(5-7

/8”)

710 mm(27-7/8”)

60 mm(2-3/8”)

870 mm(34-1/4”)

790

mm

(31-

1/8”

)

150 mm(5-7/8”)

• Wall to the floor grab bar, swing with horizontal turn.

BG0089CS

STAINLESS STEEL AISI 304 SATINSWING BAR

UNITS PER BOX: 1


750-915 mm430-510 mm

1450 mm

750-915 mm

• Stainless steel AISI 304 bar, 1,5 mm thickand Ø 32 mm (outer diameter), satin finish.Stainless steel AISI 304 column, satin finish.A hook for paper roll holding is incorporated.

• Stainless steel AISI 304 mounting on the floorflange, 2,5 mm thick, Ø 76 mm, satin finish.Incorporates 3 screws holes of Ø 7,3 mm formounting on the floor.

• Stainless steel AISI 304 mounting on the wallflange, satin finish, 125 x 100 x 10 mm.Incorporates 4 screws holes of Ø 8 mm formounting on the wall.

• Safety anchoring system that blocks the barin a perpendicular position to the wall andavoids its turning accidentally.

• Dim ± 4%

700 mm (27-9/16”)

685 mm (26-15/16”)

825 mm(32-1/2”)

120 mm(4-3/4”)

32 mm(1-1/4”)

10 mm(3/8”)

835 mm(32-7/8”)

42,5 mm(1-11/16”)

7,3 mm(5/16”)

750-915 mm450-500 mm

750-915 mm


130º / 90º angled grab bars



BA0130CS

STAINLESS STEEL AISI 304 SATIN130º ANGLED BAR

BA0130

STEEL WHITE EPOXY130º ANGLED BAR

UNITS PER BOX: 1


• Steel bar, 1,5 mm thick and Ø 32 mm(outer diameter), white epoxy-polyestercoated after antioxidant treatment. Thebending process guarantees theuniformity of the diameter alongthe bends.

• Steel mounting flange, 2 units, 3 mmthick and Ø 71,5 mm, white epoxy-polyester coated after antioxidanttreatment. Incorporates 3 screws holesof Ø 6 mm for mounting on the wall.


• Stainless steel AISI 304 bar, 1,5 mmthick and Ø 32 mm (outer diameter),satin finish. The bending processguarantees the uniformity of thediameter along the bends.

• Stainless steel AISI 304 mounting flange,2 units, 3 mm thick. Incorporates2 screws holes of Ø 6,5 mm for mountingon the wall.

• Stainless steel AISI 304 snap flangecover, 2 units, satin finish, 0,8 mmand Ø 81 mm.

UNITS PER BOX: 1


• Stainless steel AISI 304 bar, 1,5 mm thickand Ø 32 mm (outer diameter), satinfinish. The bending process guaranteesthe uniformity of the diameter along thebends.

• Stainless steel AISI 304 mounting flange,3 units, 3 mm thick. Incorporates 2 screwsholes of Ø 6,5 mm for mountingon the wall.

• Stainless steel AISI 304 snap flangecover, 3 units, satin finish, 0,8 mmand Ø 81 mm.

Total maximum length L1BA0130 611,5 mm (24-1/16”)BA0130CS 621 mm (24-7/16”)

Length of the selection (maximum distance) L2BA0130 332 mm (13-1/16”)BA0130CS 336,5 mm (13-1/4”)

430-510 mm

750-915 mm

380 mm

450 mm

750-915 mm

38 mm• BTD090CS

• Dim ± 4% • Dim ± 4%

UNITS PER BOX: 1

BTI090CS

BTD090CS

TO THE LEFT

TO THE RIGHT


• BTD090CS • BTI090CS

L1

L2

540 mm(21-1/4”)

296 mm(11-5/8”)

130º

38 mm

450 mm

380 mm

130o 750-915 mm

500 mm

750-915 mm

450-500 mm


545590º angled grab bars ADA


• Stainless steel AISI 304 bar, 1,5 mm thick and Ø 32 mm(outer diameter), satin finish. The bending processguarantees the uniformity of the diameter along the bends.

• Stainless steel AISI 304 mounting flange, 3 units, 3 mmthick. Incorporates 2 screws holes of Ø 6,5 mm for mountingon the wall.

• Stainless steel AISI 304 snap flange cover, 3 units, satinfinish, 0,8 mm and Ø 81 mm.

• BAI090CS • BAD090CS

Length of the section BAI/BAD090 446,5 mm (17-9/16”)(maximum distance) L1 BAI/BAD090CS 456 mm (17-15/16”)

Length of the long section BAI/BAD090 855,5 mm (33-11/16”)(maximum distance) L2 BAI/BAD090CS 865 mm (33-7/8”)


• BAI090/CS

UNITS PER BOX: 1

BAI090CS

BAD090CS

TO THE LEFT

TO THE RIGHT


• Steel bar, 1,5 mm thick and Ø 32 mm (outer diameter),white epoxy-polyester coated after antioxidant treatment.The bending process guarantees the uniformity of thediameter along the bends.

• Steel mounting flange, 3 units, 3 mm thick and Ø 71,5 mm,white epoxy-polyester coated after antioxidant treatment.Incorporates 3 screws holes of Ø 6 mm for mounting on thewall.


• BAI090 • BAD090

450 mm

380 mm

750-915 mm

BAI

750-915 mm

430-510 mm

• Dim ± 4%

L2

L1 375 mm(14-3/4”)

700 mm(27-9/16”)

38 mm

Grab

bar

s •

130º

/ 90

º ang

led

UNITS PER BOX: 1

BAI090

BAD090

TO THE LEFT

TO THE RIGHT

STEEL WHITE EPOXY90º ANGLED BAR



Wall to wall grab bars


BD0700WHITE EPOXY

UNITS PER BOX: 1

BD0700RBWHITE RILSAN®

UNITS PER BOX: 1

BD0700CS

STAINLESS STEEL AISI 304 SATINWALL TO WALL ANGLED BAR

UNITS PER BOX: 1

Suggestions for mountingLength of the section BD0700CS 795 mm (31-5/16”)(maximum distance) L BD0700/RB 790 mm (31-1/8”)

• Dim ± 4%

38 mm

STEEL WHITE EPOXY / WHITE RILSAN®

WALL TO WALL ANGLED BAR

• Steel bar, 1,5 mm thick and Ø 32 mm (outer diameter)white epoxy-polyester coated after antioxidant treatment,or covered with non-slipping white polyamide Rilsan®.The bending process guarantees the uniformity of thediameter along the bends.

• Steel mounting flanges, 3 units, 3 mm thick and Ø 71,5 mm,white epoxy-polyester coated after antioxidant treatment,or covered with non-slipping white polyamide Rilsan®.Incorporates 3 screws holes of Ø 6 mm for mountingon the wall.

• Stainless steel AISI 304 bar, 1,5 mm thick and Ø 32 mm(outer diameter), satin finish. The bending processguarantees the uniformity of the diameter along the bends.

• Stainless steel AISI 304 mounting flange, 3 units, 3 mmthick. Incorporates 2 screws holes of Ø 6,5 mm for mountingon the wall.

• Stainless steel AISI 304 snap flange cover, 3 units, satinfinish, 0,8 mm and Ø 81 mm.


L

L

600 mm(23-5/8”)

700 mm(27-9/16”)


450 mm

380 mm

750-915 mm

430-510 mm

750-915 mm430-510 mm

5657Grab bars with 3 support points

Grab

bar

s •

Wal

l to

wal

l / W

ith 3

sup

port

poi

nts

ADA


BFD600RB


BAR WITH 3 SUPPORT POINTS

UNITS PER BOX: 1

BFI600RB


BAR WITH 3 SUPPORT POINTS

UNITS PER BOX: 1

BFI600

STEEL WHITE EPOXYBAR WITH 3 SUPPORT POINTS

UNITS PER BOX: 1

BFD600

STEEL WHITE EPOXYBAR WITH 3 SUPPORT POINTS

UNITS PER BOX: 1

BFD600CS

STAINLESS STEEL AISI 304 SATINBAR WITH 3 SUPPORT POINTS

UNITS PER BOX: 1

BFI600CS

STAINLESS STEEL AISI 304 SATINBAR WITH 3 SUPPORT POINTS

UNITS PER BOX: 1

Suggestions for mounting• Dim ± 4%

• BFD

615 mm(24-1/4”)

155 mm(6-1/8”)

140 mm(5-7/8”)

245 mm(9-5/8”)


• Steel bar, 1,5 mm thick and Ø 32 mm(outer diameter), coated after antioxidanttreatment with non-slipping whitepolyamide Rilsan®, that gives the bar anice feel and a high protection againstcorrosion and cratches. The bendingprocess guarantees the uniformity ofthe diameter along the bends.

• Steel mounting flange, 3 units, 3 mmthick and Ø 71,5 mm, coated afterantioxidant treatment with non-slippingwhite polyamide Rilsan®. Incorporates3 screws holes of Ø 6 mm for mountingon the wall.


• Steel bar, 1,5 mm thick and Ø 32 mm(outer diameter), white epoxy-polyestercoated after antioxidant treatment. Thebending process guarantees theuniformity of the diameter along thebends.

• Steel mounting flange, 3 units, 3 mmthick and Ø 71,5 mm, white epoxy-polyester coated after antioxidanttreatment. Incorporates 3 screws holesof Ø 6 mm for mounting on the wall.

• Stainless steel AISI 304 bar, 1,5 mmthick and Ø 32 mm (outer diameter),satin finish. The bending processguarantees the uniformity of thediameter along the bends.

• Stainless steel AISI 304 mounting flange,3 units, 3 mm thick. Incorporates 2screws holes of Ø 6,5 mm for mountingon the wall.

• Stainless steel AISI 304 snap flangecover, 3 units, satin finish, 0,8 mm andØ 81 mm.


110 mm

110 mm

BFD

Max. 995 mm

750-915 mm

615 mm

BFD


• To the left • To the left • To the left

• To the right • To the right • To the right


Wall to floor grab bars

BS0010CS

STAINLESS STEEL AISI 304 SATINWALL TO FLOOR BAR

UNITS PER BOX: 1


• Dim ± 4%

776 mm(30-9/16”)

46 mm(1-3//16”)

96 mm(3-3/4”)

790 mm(31-1/8”)

• BSI • BSD

380 mm

380 mm

790 mm

776 mm


• Stainless steel AISI 304 bar, 1,5 mm thickand Ø 32 mm (outer diameter), satin finish.The bending process guarantees theuniformity of the diameter along thebends.

• Stainless steel AISI 304 mounting flange,3 units, 3 mm thick Incorporates 2 screwsholes of Ø 6,5 mm for mounting on thewall, and on the floor.

• Stainless steel AISI 304 snap flange covers,3 units, satin finish, 0,8 mm thick andØ 81 mm.


• Steel bar, 1,5 mm thick and Ø 32 mm(outer diameter), white epoxy-polyestercoated after antioxidant treatment, orcovered with non-slipping whitepolyamide Rilsan®. The bending processguarantees the uniformity of the diameteralong the bends.

• Steel mounting flange, 1 unit, 3 mm thickand Ø 71,5 mm, white epoxy-polyestercoated after antioxidant treatment,or covered with non-slipping whitepolyamide Rilsan®. Incorporates 3 screwsholes of Ø 6 mm for mounting on the wall.

• Steel snap flange cover, 1 unit, 3 mmthick and Ø 71,5 mm, white epoxy-polyester coated, or covered with non-slipping white polyamide Rilsan®, whichcovers the connection point to the floor.


• Stainless steel AISI 304 bar, 1,5 mm thickand Ø 32 mm (outer diameter), satinfinish. The bending process guaranteesthe uniformity of the diameter along thebends.

• Stainless steel AISI 304 mounting flange,1 unit, 3 mm thick. Incorporates 2 screwsholes of Ø 6,5 mm for mounting on thewall.

• Stainless steel AISI 304 snap flange cover,1 unit, satin finish, 0,8 mm thick andØ 81 mm.

• Stainless steel snap flange cover, 1 unit,3 mm thick and Ø 71,5 mm, satin finish,which covers the connection point to thefloor.

• Dim ± 4%

800,5 mm(31-1/2”)

880 mm(33-1/8”)

321 mm(12-5/8”)

186 mm(7-5/16”)

380 mm

380 mm

150 mmBSI

775 mm

880 mm

380 mm

880 mm

430-510 mm

• BSI

STAINLESS STEEL AISI 304 SATINWALL TO FLOOR BAR

UNITS PER BOX: 1

BSI020CS

BSD020CS

TO THE LEFT

TO THE RIGHT

STEEL WHITE EPOXY / WHITE RILSAN®

WALL TO FLOOR BAR

BS0010

BS0010RBUNITS PER BOX: 1

UNITS PER BOX: 1

5859Folding seats

Grab

bar

s •

Wal

l to

floor

/ Fo

ldin

g se

ats

ADA



455 mm(17-15/16”)

100 mm(4”)

406 mm(16”)

430-510 mm(14-20”)

448 mm(19-1/4”)

Depth to the wall (closed) 160 mmDepth to the wall (closed) 62 mm

445 mm(17-1/2”)

430-510 mm(17-20”)

430 mm(16-7/8”)

320 mm(12-5/8”)

AM0200CSUNITS PER BOX: 1

STAINLESS STEEL AISI 304 SATIN

AM0100

PHENOLIC + STAINLESS STEELAISI 304 SATIN

UNITS PER BOX: 1


• Stainless steel AISI 304 seat, 1,7 mm thick, four barsØ 32 mm (outer diameter), satin finish.

• Stainless steel AISI 304 frame, Ø 30 mm, satin finish,with rounded edges for maximal security.

• Stainless steel AISI 304 mounting flange, 2 units, 2,7 mmthick, and 100 x 36 mm, satin finish. Incorporate 2 screwsholes of Ø 10 mm for mounting on the wall.


750-915 mm430-510 mm

750-915 mm430-510 mm

• One-piece seat, 8 mm non porous solid phenolic, beige finish,surfaces and black phenolic-resin core. It can not delaminate.Integral slots for water drainage.

• Stainless steel AISI 304, 1.6 mm thick frame, satin finish,tubes Ø 25 mm and Ø 30 mm.

• Stainless steel AISI 304 mounting flange, 2 units, 5 mm thick,and Ø 75 mm satin finish. Incorporate 3 screws holes ofØ 10 mm for mounting on the wall.

• Stainless steel guide bracket, satin finish.

6061

Hote

l bat

hroo

m a

cces

sorie

s •

Chro

med

bra

ss

Hotel bathroom accessories. Chromed brass

• Facial tissue dispenser, chromed brass,for tabletop (not suitable for mountingon the wall or on a horizontal surface).

AC0976C

FACIAL TISSUE DISPENSER

UNITS PER BOX: 39

• Chromed brass body, 0,6 mm thick.Without back plate. This product acts as acover which is used to place over a facialtissue paper box.

• With a protection thickness of 21 m nickel+ 0,20 m chrome.

• Dimensions: 52 x 240 x 125 mm.


AC0083C

FACIAL TISSUE DISPENSER

UNITS PER BOX: 25


• Chromed brass body, 0,8 mm thick.It incorporates a special-key hidden lockingmechanism that allows removing the frontpart for replenishment. This is attached tothe base plate by means of pivoting hinges.


• Facial tissue dispenser, chromed brassfor tabletop or mounting on the wall.

• Towel ring, chromed brass, for wallmounting.

AC0978C / AC0979C

TOWEL RING

UNITS PER BOX: 24 / 38


• Towel ring with chromed brass tube ofØ 9,5 mm, 1 mm thick.

• Ø 66 mm chromed brass snap flange cover.• Press-formed mounting flange which

incorporates 3 screws holes of Ø 5 mmfor wall mounting.


• AC0978C dimensions: 230 x Ø 200 x 62 mm.AC0979Cdimensions: 200 x Ø 170 x 62 mm.

• Angled bar/Angled bar with soap basket,chromed brass, for wall mounting.

AC0956C / AC0957C

ANGLED BAR /ANGLED BAR WITH SOAP BASKET

UNITS PER BOX: 17


• Chromed brass bar Ø 25 mm, 1 mm thick.• Chromed brass snap flange cover, 2 units• Soap basket with chromed brass rods

Ø 8 and 3 mm.• Press-formed mounting flanges, 2 units.

Each flange incorporates 3 screws holesof Ø 5 mm for mounting on the wall.



• Straight bar, chromed brass, for wallmounting.

• For use as a towel rail or just asa grab bar.

AC0950C / AC0974C / AC0973C

STRAIGHT BAR

UNITS PER BOX: 50 / 34 / 34


• Chromed brass bar Ø 25 mm, 1 mm thick.• Chromed brass snap flange covers, 2 units.• Press-formed mounting flanges, 2 units.



• AC0950C dimensions: 66 x 320 x 107 mm.AC0974C dimensions: 66 x 540 x 107 mm.AC0973C dimensions: 66 x 665 x 107 mm.

• Towel bar, chromed brass, for wallmounting.

AC0961CUNITS PER BOX: 34


• Chromed brass arm of Ø 25 mm and1 mm thick.

• Chromed brass snap flange cover ofØ 66 mm.

• Press-formed mounting flange whichincorporates 2 screws holes of Ø 5 mmfor mounting on the wall.



TOWEL BAR

Hotel bathroom accessories. Chromed brass

• Toilet paper holder with cover, chromedbrass, for wall mounting.


TOILET PAPER HOLDERWITH COVER


• Support to the wall in chromed brass2,5 mm thick.

• To be mounted to the wall by meansof 2 fixing points.

• Chromed brass cover, 0,8 mm thick.• Axis to support the roll paper in

thermoplastic, white colour.• With a protection thickness of 21 m nickel

+ 0,20 m chrome.• Dimensions: 30 x 120 x 100 mm.

• Holder for spare toilet paper, chromedbrass, for wall mounting.

AC0968C

HOLDER FORSPARE TOILET PAPER

UNITS PER BOX: 38


• Chromed brass arm of Ø 25 mm and1 mm thick.





• Hook, chromed brass, for wall mounting.

AC0966C

HOOK

UNITS PER BOX: 110

• Chromed brass hook of Ø 25 mm and1 mm thick.






• Towel shelf with a towel bar, chromedbrass, for wall mounting.

AC0959C

TOWEL SHELFWITH A TOWEL BAR

UNITS PER BOX: 1


• 2 chromed brass arms Ø 25 mm and1 mm thick.

• The shelf consist of four chromed brassrods Ø 14,5 mm and 1 mm thick .

• Chromed brass snap flange cover, 2 units.• Press-formed mounting flanges, 2 units.





• Glass shelf, 5 mm thick.• Chromed brass arm and snap flange

cover, 2 units, 1 mm thick, bright finish.• Press-formed mounting flanges, 2 units.


• With a protection thickness of 21 mnickel + 0,20 m chrome.

• Dimensions: 600 x 133 mm.

• Glass shelf, 5 mm thick, with roundedcorners, for wall mounting.


SHELF GLASSWITH CHROMED BRASS

Hote

l bat

hroo

m a

cces

sorie

s •

Chro

med

bra

ss

Hotel bathroom accessories. Chromed brass6263

• Soap dish, chromed brass, with circularsoap dish in glass for wall mounting.

• Soap dish in glass, with protective plasticdivider.

• Chromed brass arm.• Soap dish tray in press-formed sheet.• Chromed brass snap flange cover, of

Ø 90 mm.• Press-formed wall plate, with 3 screws

holes of Ø 5 mm for mounting on the wall.• With a protection thickness of 21 m nickel



AC0960C

SOAP DISH

UNITS PER BOX: 60

• Soap basket grill format, chromed brass,for wall mounting.

AC0962C/AC0963CUNITS PER BOX: 60 / 50

SOAP BASKETGRILL FORMAT


• Soap basket grill format with chromedbrass rods of Ø 8 and 3 mm.

• To be mounted to the wall by means of2 fixing points.

• Chromed brass snap flange cover, 2 units.They will be fixed to the soap basket bymeans of 2 keep pins.


• AC0962C dimensions: 175 x 107 mm.AC0963C dimensions: 265 x 107 mm.

• Toothbrush/paste set, chromed brass,with tumbler in glass for wall mounting.

AC0958C

TOOTHBRUSH/PASTE SET

UNITS PER BOX: 60

• Chromed brass arm.• Glass tumbler.• Tumbler tray in press-formed sheet.• Chromed brass snap flange cover,

of Ø 90 mm.• Press-formed mounting flange, with

3 screws holes of Ø 5 mm for mountingon the wall.


• Dimensions: 140 x 77,6 x 108 mm.


• Triangular soap basket grill format,chromed brass, for wall mounting.

AC0964C

SOAP BASKETTRIANGULAR

UNITS PER BOX: 38

• Soap basket grill format with chromedbrass rods of Ø 8 and 3 mm.

• To be mounted to the wall by means of4 screws.




Hotel bathroom accessories.Stainless steel Medinox

• Toilet brush holder,chromed brass.

• Suitable for wallmounting or standingon the floor.


• Chromed brass body, 1 mm thick.• Chromed brass tube and lid, 1 mm thick.• Stainless steel interior brush handle,

0,8 mm thickness.• Sisal hair brush.• With a protection thickness of 21 m nickel


ES0010C

TOILET BRUSH HOLDERCHROMED BRASS

UNITS PER BOX: 25

• Toilet brush holder,steel white epoxy.


ES0010UNITS PER BOX: 25

• Steel white epoxy body, 1 mm thick.Mounting on the wall by means of aflange with two screws.

• Steel white epoxy tube and lid, 1 mmthick.

• Steel white epoxy interior brushhandle, 0,8 mm thickness.

• Sisal hair brush.• Dimensions: 400 x 90 x 90 mm.


TOILET BRUSH HOLDERSTEEL WHITE EPOXY


• Stainless steel AISI 304 body, 1 mm thick.Mounting on the wall means by a flangewith two screws.

• Stainless steel AISI 304 tube and lid, 1 mmthick.

• Stainless steel AISI 304 interior brushhandle, 0,8 mm thickness.

• Sisal hair brush.• Dimensions: 400 x 90 x 90 mm.

• Toilet brush holder,stainless steel AISI 304,bright/satin finish.


ES0965C/CSUNITS PER BOX: 25

TOILET BRUSH HOLDERSTAINLESS STEEL AISI 304


• Stainless steel AISI 304 bar, Ø 9,8 mm,bright/satin finish, seamless.

• Stainless steel AISI 304 arms 2 units,0.8 mm thick, bright/satin finish.Completely welded construction.

• Mounting on the wall by means oftwo screws.

• Dimensions: 18 x 535 x 66 mm

AI0020C/CS

TOWEL RAIL

UNITS PER BOX: 20

AI0030C/CSUNITS PER BOX: 10

• Stainless steel AISI 304 two bars,Ø 9,8 mm, bright/satin finish,seamless.





DOUBLE TOWEL RAIL


• Towel shelf consist of six seamless bars, stainless steel AISI 304,0.8 mm thick, bright/satin finish.

• Stainless steel AISI 304 seamless bar,0.8 mm thick, bright/satin finish.


• Mounting on the wall by means offour screws.



TOWEL SHELFWITH TOWEL BAR

• Towel rail, stainless steel AISI 304,bright/satin finish, for mounting on thewall.

• Double towel rail, stainless steelAISI 304, bright/satin finish,for mounting on the wall.

• Towel shelf with towel bar, stainless steelAISI 304, bright/satin finish, for mountingon the wall.

NEW NEW NEW

NEW

Hote

l bat

hroo

m a

cces

sorie

s •

Stai

nles

s st

eel M

edin

ox

6465

• Holder for toilet paper roll, stainlesssteel AISI 304, bright/satin finish,for wall mounting


• Stainless steel AISI 304 arm one unit,0.8 mm thick, bright/satin finish.Completely welded construction.

• Mounting on the wall by meansof 1 screw.

• Stainless steel AISI 304 cylindrical axis for the roll, 13,8 mm Ø.


• Holder for toilet paper roll, stainlesssteel AISI 304, bright/satin finish,for wall mounting

• Stainless steel AISI 304 support tothe wall, one piece, seamless,0.8 mm thick, bright/satin finish.Mounting on the wall by means of2 slot holes.

• Stainless steel AISI 304 cover,0,8 mm thick, bright/satin finish.

• Stainless steel AISI 304 cylindrical axis for the roll, 9,8 mm Ø.




HOLDER FORTOILET PAPER ROLL WITH COVER


HOLDER FORTOILET PAPER ROLL


TOWELRING


• Stainless steel AISI 304 ring,Ø 0.8 mm, bright/satin finish.

• Stainless steel AISI 304 arm,0.8 mm thick, bright/satin finish.Completely welded construction.

• Mounting on the wall by means ofone screw.


• Towel ring, stainless steel AISI 304,bright/satin finish, for mounting onthe wall.


TOWELRING


• Stainless steel AISI 304 ring,Ø 0.8 mm, bright/satin finish.




• Towel ring, stainless steel AISI 304,bright/satin finish, for mounting onthe wall.

NEW

NEW

NEW

NEW NEW

• Holder for toilet paper roll, stainlesssteel AISI 304, bright/satin finish,for wall mounting.

AI0070C/CS

HOLDER FORTOILET PAPER ROLL


UNITS PER BOX: 25

NEW

• Stainless steel AISI 304 ring,half- square form, 0.8 mm, bright/satin finish.

• Stainless steel AISI 304 arms 2 units,0.8 mm thick, satin/bright finish. Completely welded construction.

• Mounting on the wall by means of two screws.





• Stainless steel AISI 304 arm,0.8 mm thick, bright/satin finish.Completely welded construction.

• Stainless steel AISI 304 hook,0.8 mm thick bright/satin finish.


• Hook, stainless steel AISI 304,bright/satin finish, for mounting onthe wall.

NEW

HOOK

• Soap dish, stainless steel AISI 304,bright/satin finish, for mountingon the wall.


• Stainless steel AISI 304 dish,0.8 mm thick, bright/satin finish,welded to the holder.

• Stainless steel AISI 304 holder,0.8 mm thick, bright/satin finish,seamless.



AI0050C/CS

SOAP DISH

UNITS PER BOX: 25


• Towel shelf consist of four seamlessbars, stainless steel AISI 304, Ø 9 mm,bright/satin finish.

• Stainless steel AISI 304 arms, 2 units,0.8 mm thick, bright/satin finish.Completely welded construction.




SHELF

• Shelf, stainless steel AISI 304,bright/satin finish, for mountingon the wall.

NEW


• Stainless steel AISI 304 shelf,0.8 mm thick, bright/satin finish,welded to the holder.

• Stainless steel AISI 304 seamless arms,2 units, 0.8 mm thick, bright/satin finish.Completely welded construction.




SHELF

• Shelf, stainless steel AISI 304,bright/satin finish, for mountingon the wall.

NEW NEW

NEW

• Soap dish, stainless steel AISI 304,bright/satin finish, for mountingon the wall.


• Soap dish consists of four seamlessbars, stainless steel AISI 304, Ø 9 mm,bright/satin finish.

• Stainless steel AISI 304 arm,2 units,0.8 mm thick, bright/satin finish.Completely welded construction.




NEW

SOAP DISH


We design, develop, manufacture and commercialize our products in accordance

with ISO norm UNE-EN-ISO 9001:2000.

The certifications we have obtained in different countries are testimony to the fact

that our products comply with all safety regulations and standards.

SHIPPING INFORMATION

Sizes of pallets

(A) 120 x 80 x 120 cm (F) 120 x 80 x 110 cm (K) 120 x 80 x 165 cm(B) 120 x 80 x 130 cm (G) 120 x 80 x 107 cm (L) 120 x 80 x 123 cm(C) 120 x 80 x 140 cm (H) 120 x 80 x 116 cm (M) 120 x 80 x 195 cm(D) 120 x 80 x 115 cm (I) 120 x 80 x 103 cm (N) 120 x 80 x 150 cm(E) 120 x 80 x 125 cm (J) 120 x 80 x 100 cm (O) 120 x 80 x 155 cm

The identification of the pallet size is indicated in each product as follows:

MEDICLINICS EXPORT SALES CONDITIONS

General export sales conditions

DELIVERY CONDITIONS: Ex-works Barcelona, Spain, for orders below 3.000 EUR (Incoterms 2000)FCA/FOB Barcelona, Spain, for orders over 3.000 EUR (Incoterms 2000)

PAYMENT TERMS: Payment in advance30 days net against credit insuranceIrrevocable LC at sight

DELIVERY TIME: To be confirmed for every specific order

MINIMUM QUANTITIES: 1 pallet per each model

Mediclinics, S.A., reserves the right to make changes and/or modificationsto the products and their specifications without prior notice.

CERTIFICATIONS

ADA

www.mediclinics.com

Distributed by

Gen

eral

Cat

alog

ue 2

008-

2009

M

K 0

169

D

ep. L

egal

B-2

4.16

0-20

08

Mediclinics S.A. (Spain)C/ Industria 54 08025 BARCELONATel: +34 93 446 47 00Fax: +34 93 348 10 39e-mail: [email protected]

Mediclinics B.V. (The Netherlands)P.O. Box 41 NL-7100 AA WINTERSWIJKTel: +31 543 514 000Fax: +31 543 514 001e-mail: [email protected]

Saniflow Corporation (USA)12800 N.W. 38th AvenueMIAMI, Florida 33054-4525Tel: +1 (305) 424 24 33Toll-free: +1 (877) 222 91 25Fax: +1 (305) 424 24 35e-mail: [email protected]

Join us in this speedy experience! Mediclinics official 2008 sponsor

of the leading Jack & Jones WRB Moto team.

Mediclinics (Italia)Via Senigallia 18/220161 MILANOTel: +39 02 646 722 20Fax: +39 02 646 724 00e-mail: [email protected]

Date post:	19-May-2015
Category:	Documents
Upload:	odexlar-odexpool-fabrica-e-representacao-de-produtos-quimicos-de-higienelimpeza-tratamento-de-aguas-e-piscinas-acessorios-e-servicos
View:	949 times
Download:	3 times

Automatismos Para Wcs

Documents