AU
TO
ME
CH
AN
IKA
Promotion valid from 03/09/2012 to 31/12/2012
NEW ITEMSSEPTEMBER
2012
2
1760K/MT
1759
Digital automotive multimeter with infrared thermometer and induction clamp in plastic case
Optical analyzer for coolant, battery, windscreen and AdBlue® fluids
Supplied in hard case
• DC voltage: 400mV-4/40/400/600V • AC voltage: 400mV-4/40/400/600V • DC current: 40/400mA-20A • AC current: 40/400mA-20A • Resistance: 400Ω-4/40/400KΩ-4/40MΩ • Capacity: 4/40/400nF-4/40/400µF-4/40mF • Frequency: 4/40/400KHz-4/40MHz • Continuity test: <35Ω • Dwell angle function: 4-8 Cil • Duty cycle function: 0,5% ÷ 99,0% • Pulse amplitude: 1.0 ÷ 20.0 ms • Diode test: test current 1.0mA • Peak storage function • Data storage function • Auto-range function • Multimeter power supply: 1 9V battery (included) • Laser thermometer temperature: -30 °C ÷ +550 °C (fixed emissivity: 0.95) • Type K thermocouple temperature: -30 °C ÷ +1000 °C • Thermometer power supply: 1 9V battery (included) • Induction clamp: 4 strokes, 600 ÷ 4000 RPM 1000 ÷ 12000 RPM (x10RPM) 2 strokes, 300 ÷ 4000 RPM 1000 ÷ 6000 RPM (x 10RPM)
• Automatic temperature compensation • Battery acid: measurement range: 1.1 ÷ 1.3 kg/l
• Propylene coolant: -25 °C ÷ -50 °C • Ethylene coolant: -25 °C ÷ -50 °C • Windscreen fluid: -25 °C ÷ -40 °C
• AdBlue®: urea percent measurement: 30% ÷ 35%
017590251 800 g
1566NTool for removing/installing steering arms
Ø mm mm L mm 35÷45 27 400 1,5 kg 015660010
400x290x110 mm 017600200 2 kg
Ø
3
AUTOMECHANIKA 2012960KCAssortment of tools for removing broken or damaged glow plugs M8• For glow plugs with thread M8x1.0 mm • Allows broken glow plugs stuck in head to be easily removed
960PIBohrersortiment für die Reinigung
von Einspritzventilsitzenim Kunststoffkasten
009600215 1,4 kg
For removing residues from injector seats• Flat reamer, Ø 19 mm - 15 mm, for universal injectors
• Flat reamer, Ø 17 mm - 17 mm, for Delphi/Bosch injectors (BMW/PSA/Renault/Ford)
• 17-mm reamer for Fiat Iveco, Ford injectors • Flat reamer, Ø 19 - 17 mm, for Bosch injectors (Mercedes CDI).
• Angled reamer, Ø 21 - 17 mm, for Fiat/Iveco injectors • Handle
009600800 1,5 kg
1484Set of 2 tools for removing and installing stretch beltsAllows stretch belt to be quickly removed and correctly installed, without risking damaging it
400x300x60 mm
250x130x50 mm
Install
Remove
Ø
mm
014840010 50 g
4
3002
3003
1569
Creeper and seat
Creeper made of shockproof plastic
Assortment of tools for extracting and inserting rear axle silent blocks, driving shaft oil seals and wheel bearings• Bushings can be used both on vehicle and on hydraulic press• Direct extraction with wrench • User-friendly, no pneumatic or hydraulic machines required• The kit comprises: 4 threaded bars: M10-M12-M14-M16 4 washers bushings for diameters ranging from 44 mm to 82 mm
030020001 6,5 kg
030030001 4,5 kg
015690010 10 kg
• Steel frame • PVC lining with upholstery • Easily convertible into a creeper or a seat
Castors Ø: 76 mm
Quick, accurate
2 products in 1: creeper or seat
470x400x100 mm
110kg
130kg
5
AUTOMECHANIKA 2012
Set of 5 ring wrenches for belt tightening nuts
Hydraulic bottle jack
13-15-16-17-19 mm
1477D/S5
3011/T20
111GAdjustable wrenches with scales chrome-plated, bi-material handles• Movable jaw opening with right-hand rotation of pin • Ergonomic handle • Metric and inch scale
001110620 310 g
111G/200L 200 mm A max 28
001110625 500 g
111G/250L 250 mm A max 32
001110630 780 g
111G/300L 300 mm A max 36
mm/inch readout
Ergonomic handle
Max. carrying capacity: 20T
H minmm
H maxmm
L mm
241 521 115 13,5 kg 030110200
600x200x70 mm 014770200 2,2 kg
H min-max
L
A
6
Electronic torque wrench, torque and angle readout right-hand (accuracy: +/-2%) and left-hand (accuracy: +/-3%) tightening in plastic case
Assortment of 1 torque screwdriver, 8 hexagon hand sockets, 20 bits and 2 accessories
in sheet metal case with soft thermoformed tray
599DGT-A20
583/C31
Reversible ratchet: allows for right-hand and left-hand tighteningDual measurement mode: peak hold and trackDual approach/stop signal: green LEDs, and, later, red ones, matched with a buzzer, inform user that set torque or angle has been reachedInternal data storage software: up to 9 torque/angle values can be presetAntislip bi-material handlePower supply: 2 AA - 1.5V batteries (included)
Software and USB cable for downloading
data onto PC
UNI EN 26789 ISO 6789
005830931 1,2 kg 270x120x45 mm
1,2 ÷ 6 Nm
4-5-5,5-6-7-8-9-10 mm
0,6x4,5 - 1x5,5 - 1,2x6,5 mm
PH1 - PH2 (x2) - PH3
583/6
900
860LP
860PH
2-2,5-3-4-5 mm
T9-T10-T15-T20-T25-T27-T30-T40
80 mm
1/4”- 1/4”
860PE
860TX
882P/80
892/0
Nm Kgfm lbf.ft L mm 40÷200 0÷360° 4÷20 30÷150 1/2” 520 2,5 kg 005990520
Torque screwdriver, 1.2 ÷ 6 Nm
Angle read out up to 360°!
7
AUTOMECHANIKA 2012
Timing devices for Fiat 1.6 Multijet engines
Lifting airbags
Timing devices for Renault 2.0 dci engines
Assortment of 18 socket drivers with heads specifically designed for car repair jobs in metal case
1461/C5A
1800/100
1461/C11A
920MIX/C18
• Lifting/levelling• Locking doors• Mounting doors and windows
014610051 1,1 kg
009200600 3 kg
018000000 70 g
014610111 1,2 kg
420x185x60 mm
420x280x60 mm 335x145x60 mm
10-12-14-16-18
30-40-45-50-55
8L-10L-12L-14L
7-9-10-12L
920FTX
920TX
920XZN
920ES
8
3040
3041
Rear motorcycle stand adjustable
Front motorcycle stand adjustable
• Matt black lacquer • Polyamide slider holder • 4 thermoplastic rubber wheels
• Matt black lacquer • Polyamide slider holder
• 4 thermoplastic rubber wheels
030400001 4 kg
030410001 4 kg
3040A/1
030400501 380 g
V-shaped sliders, pair
3040A/2L-shaped
sliders, pair, made of rubber
030400502 840 g
3041A/11Roller sliders, pair
030410511 1,1 kg
3041A/15
030410515 270 g
Cone-shaped sliders, pair
Item for 3040A/1
3040A/6 Pawls, pair, made of aluminium M6x1 mm 030400506
3040A/8 Pawls, pair, made of aluminium M8x1.25 mm 030400508
3040A/10 Pawls, pair, made of aluminium M10x1.25 mm 030400510
9
AUTOMECHANIKA 20123042
3043
Front stand for motorcycle steering pin
Motorcycle stand with left single arm
• Matt black lacquer • 4 thermoplastic rubber wheels
• Matt black lacquer • 4 thermoplastic rubber wheels
030420001 7 kg
030430001 5,5 kg
Includes a 6-pin kit
Item Pin 3043A/41 Ducati 0304305413043A/42 Triumph 0304305423043A/43 MV 030430543
3043A/44 Ducati 1098 030430544
3043A/45 Honda 0304305453043A/46 BMW F800S 030430546
3043A/47 BMW K,R,S 030430547
10
1933ILLong spindle die grinder
019330010 1,4 kg
• Based on its high power, it is recommended for heavy-duty, prolonged jobs • Antislip housing and handle • Mounted on ball bearings • Knob speed regulator • Swivel air inlet • Silenced rear exhaust • Safety lever device • Collect chuck, 3 mm and 6 mm
High power
Chuck capacity 3-6 mmFree speed 20.000 rpm/minPower 0,38 kWWorking pressure 6,2 BarMean air consumption 230 l/minInternal hose size (Ø) 10 mm
45,1mm
Ø 1/4” GAS
340 mm
Progressive blow gun with rubber nozzle
• Durable, shockproof composite material body • Replaceable scratchproof rubber nozzle
• Threaded aluminium insert: 1/4” GAS, female • Operating pressure: 6-8 bar
• Maximum operating pressure: 15 bar • Average air consumption: 87 l/min
• Operating temperature: -20°C ÷ +70°C
1949BC
Scratchproof tip
019490022 113 g
20 mm pneumatic belt sander
019370051 1,6 kg
• High removal capacity based on 20 mm belt • Antislip handle
• Quick-to-replace belt • Adjustable swivel sanding arm
• Belt safety guard • Swivel air inlet
• Silenced rear exhaust • Safety lever device
1937N20
Belt size 20x520 mmFree speed 16.000 rpm/minWorking pressure 6,2 BarMean air consumption 400 l/minInternal hose size (Ø) 10 mm
Easy to handle, safe
30 mm
7” (178 mm)
160 mm
11
AUTOMECHANIKA 2012
M300 M310
1914
Assortment of 1 reversible impact wrench 1927A, 12 Impact sockets and 1 accessory in soft thermoformed tray
Micro die grinder
Polyurethane recoil hoses, 98 Shore, extendable
Assortment of 1 reversible impact wrench made of composite material 1927CD, 12 Impact sockets and 1 accessory in soft thermoformed tray
• High speed • Compact, lightweight, for remarkable ease of handling • Protected 1.5-m-long cable
• Made up of polyester-based elastomers which enhance flexibility, even at low temperatures, thereby producing an outstanding memory effect • Female/female threaded connectors with spring
1934MAV
Chuck capacity 3 mmFree speed 54.000 rpm/minPower 0,04 kWWorking pressure 6,2 BarMean air consumption 113 l/minInternal hose size (Ø) 4,5 mm
019340010 200 g
150 mm
54,000 rpm
For precision jobs
L m DxD1 mm Ø BSP
4 m 5x8 1/4” 250 g 0191400546 m 5x8 1/4” 320 g 019140056
10 m 5x8 1/4” 500 g 019140060
024500300 4,7 kg 024500310 3,9 kg
367 mm
294 mm
367 mm
294 mm
12-13-14-15-16-17-18-19-21-22-24-27 mm
125 mm
720
720/21
1
12
C39SMSpecial mobile roller cab,
Racing SM typeService module
• Integrated wastepaper basket • Paper roll compartment
• 1 large drawer 420x305x270 mm
Specifications • Multi-ply wood worktop • 4 castors, Ø 125 mm 2 fixed and 2 steering (one with brake), with exposed covering • Static load capacity: 1200 kg
7-drawer module588x367 mm, with ball bearing slides: 6 drawers, 70 mm high 1 drawer, 240 mm high • Drawer bases protected by foamed rubber mats • Front centralized safety lock • Opening system throughout length of drawer • Drawer front made of aluminium
CP52Sturdy trolley• Welded sheet metal frame • Ergonomic handle
052000501 29 kg 052000502 052000503
• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake)
750kg
980 m
m
520 mm
1540 mm92
0 mm
600 mm
1000 mm
Racing MD
039390001 125 kg 039390002 039390003
Racing SM
1200
kg
13
AUTOMECHANIKA 2012C39MD
Special mobile roller cab, Racing MD type2-drawer module88x367x270 mm and 588x367x380 mm, with ball bearing slides • Drawer bases protected by foamed rubber mats • Front centralized lock • Opening system throughout length of drawers • Drawer front made of aluminium
Specifications • Multi-ply wood worktop • 4 castors, Ø 125 mm 2 fixed and 2 steering (one with brake), with exposed covering • Static load capacity: 1200 kg
7-drawer module588x367 mm, with ball bearing slides: 6 drawers, 70 mm high 1 drawer, 240 mm high • Drawer bases protected by foamed rubber mats • Front centralized safety lock • Opening system throughout length of drawer • Drawer front made of aluminium
039390101 123 kg 039390102 039390103
980 m
m
520 mm
1540 mm
C49Mobile 2-door cabinet
• Front lock
2 large interior shelves
049000001 37,5 kg 049000002 049000003
• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake)
970
mm
480 mm
800 mm
1200
kg
Racing MD
Racing SM
14
C16Tool box, made from plastic with interior object compartment, empty• Double steel closure • Aluminium folding handle running throughout length of cover • Carrying capacity: 30 kg
500x260x260 mm
021160000 2,5 kg
Lowered hydraulic hoist 2 t with 6 wheels• Hoist can be easily handled on uneven, irregular floors • Minimum plate height: 85 mm • Maximum plate height: 520 mm • Length: 860 mm • Width: 400 mm • Weight: 43 kg • Maximum capacity: 2 tons
Steady, easy to handle
3030/2T
DouBle laced
Increased comfort, reduced weight
H max520 mm
H min85 mm
Dual front tilting wheels made of plastic material (PTFE)
030300020 43 kg
2 t
15
AUTOMECHANIKA 2012
7368GKK
7368BKK
7368NKK
Ankle shoe, made of “VINTAGE” leather, greased, waterproof
• Aluminium toe cap with breathable membrane • Composite fibre penetration proof insole
Without toe capand penetration
proof insole
EU UK 38 5 07368023839 6 07368023940 6,5 07368024041 7 07368024142 8 07368024243 9 07368024344 10 07368024445 10,5 07368024546 11 07368024647 12 073680247
EU UK 38 5 07367003839 6 07367003940 6,5 07367004041 7 07367004142 8 07367004243 9 07367004344 10 07367004445 10,5 07367004546 11 07367004647 12 073670047
EU UK 38 5 07368013839 6 07368013940 6,5 07368014041 7 07368014142 8 07368014243 9 07368014344 10 07368014445 10,5 07368014546 11 07368014647 12 073680147
EU UK 38 5 07368003839 6 07368003940 6,5 07368004041 7 07368004142 8 07368004243 9 07368004344 10 07368004445 10,5 07368004546 11 07368004647 12 073680047
DouBle laced
DouBle laced
DouBle laced
URBA
N S
HO
ES
7367G
DouBle laced
EN 20345 S3 SRC
EN 20345 S3 SRC
EN 20345 S3 SRC
EN 20347 O2 SRC
FR
AN
KF
UR
T 2
012
Beta Utensili S.p.A.Via Volta 1820845 Sovico (MB) ItalyTel +39 039.2077.1 Fax + 39 [email protected]
The images are for reference only. Beta Utensili S.p.A. reserves the right to update and upgrade its product range without notice.
9980
2367
7