Conventional automotive batteries can be extremelyintimidated by the power demands of today’svehicles – falling short of delivering criticaldependability and performance. Cars, trucks, SUVs,and other passenger vehicles have more electronicsthan ever before.

Intimidator automotive batteries are especiallydesigned to handle factory installed electronics toanything that plugs in or turns on, and still deliverdependable starting power. With almost 2x theendurance* in severe service and 2x the cycle life*,these batteries are equipped for the toughestconditions and the most intense electrical powerdemands.

Intimidator automotive batteries are also ideal fortuner cars or off-road vehicles, offering superiorpower for high-performance equipment and a high-impact design for rugged, back road adventures.

AGMFEATURES AND BENEFITS

• Premium maintenance-freestarting and cycle service power

• 20x more vibration protection*safeguards battery performanceover time

• Faster recharging powers moreelectronics longer

• 2x the cycle life* extendsperformance and life

• Spillproof design providesadded protection forsophisticated electronicequipment

* Compared to conventional designs

AUTOMOTIVE

East Penn Manufacturing Co. Lyon Station, PA 19536-0147 Phone: 610-682-6361 Fax: 610-682-4781 Order Department Hotline: 610-682-4231

E.P.M. Form No. 1737 Rev. 9/14 © 2014 by EPM Printed in U.S.A.All data subject to change without notice. No part of this document may be copied or

reproduced, electronically or mechanically, without written permission from the company.

www.dekabatteries.com

Intimidator is a pioneer brand in the development of the form, fit, and function of AGM battery technology.It has been tested and proven to best meet the criteria of the automotive industry.

ENHANCED ELECTROLYTE SUSPENSION SYSTEM• Absorbs more electrolyte, protects internal components

• Micro-porous glass separators prevents acid spills and terminal corrosion

Intimidator® AGM Solutions for Intimidating Battery Needs

POWER-PERFORM® FULL-FRAME POSITIVE & NEGATIVE PLATES• Better withstands severe service demands

• Prevents life-robbing electrical shorts from exposed wire

ADVANCED DURABILITY DESIGNS• Fortified posts, straps, and welds resist vibration damage

• Maximize current transfer over life of battery

East Penn’s A3 ™ Advanced-Cubed precision-focused manufacturing approach ensures the process behind the technology delivers critical quality at each stage of battery production. INTIMIDATOR batteries are supported by A3 manufacturing to optimize the life, power, and durability of the battery’s design and performance.

Experience the East Penn Advantage

AUTOMOTIVE INTIMIDATOR® AGM BATTERIES

All batteries have SAE automotive posts unless noted. All batteries in Black cover/Black case except where noted.

FOOTNOTES: 2. Black cover / Gray case 16. Dual terminal universal design 17. Includes handle 18. Includes top adapter 22. Flush manifold vented cover 46. If battery is used on-highway vehicles equiped with two-way radios (such as taxis, police, and emergency vehicles), marine applications, off-highway use, and other non-automotive usage, free warranty replacement period will be 18 months. Free replacement warranty is 12 months in deep-cycle use and 3 months in full electric vehicle use 79. Added durability for heavier cycle service and commercial use J. JIS Terminal “pencil post”.

APPROX.WEIGHT(lbs.)

GROUPNO.

PART NO. FOOTNOTESCCA

@ 0°FRES.CAP.

Length Width HeightPERFORMANCE LEVEL MAXIMUM OVERALL DIMENSIONS

20 AHRATE

REF.CA.

ABSORBED GLASS MAT (AGM) VALVE REGULATED 75/86 9A75DT 680 100 835 50 41 9 3⁄4 248 7 1⁄16 180 7 15⁄16 202 2,16,17,18,46 34/78 9A78DT 775 120 955 55 42.5 10 3⁄4 273 6 7⁄8 175 8 203 2,16,17,46 34/78 9A78CDT 700 120 840 55 40.5 10 3⁄4 273 6 7⁄8 175 8 203 2,16,17,46,79 34 9A34 775 120 955 55 41 10 3⁄4 273 6 7⁄8 175 8 203 2,17,46 34R 9A34R 775 120 955 55 41 10 3⁄4 273 6 7⁄8 175 8 203 2,17,46 35/85 9A35/85 680 100 835 50 39 9 3⁄4 248 6 7⁄8 175 7 3⁄4 197 2,17,18,46 47 9A47 600 100 690 60 39 9 9⁄16 242 6 7⁄8 175 7 1⁄2 190 17,22,46 48 9A48 760 120 875 70 45.5 11 278 6 7⁄8 175 7 1⁄2 190 17,22,46 49 9A49 850 170 975 92 58.5 13 15⁄16 354 6 7⁄8 175 7 1⁄2 190 17,22,46 65 9A65 775 150 955 75 46 12 305 7 3⁄8 187 7 5⁄8 194 2,17,46 78 9A78 775 120 955 55 42.5 10 3⁄4 273 6 7⁄8 175 7 1⁄4 184 2,17,46 94R 9A94R 800 140 920 80 51.5 12 7⁄16 315 6 7⁄8 175 7 1⁄2 190 17,22,46 95R 9A95R 950 190 1090 105 64.5 15 1⁄2 394 6 7⁄8 175 7 1⁄2 190 17,22,46 Prius 9A51P 325 60 400 46 30 9 3⁄8 238 5 127 8 3⁄4 222 22,46,J

inch mm inch mm inch mm