OverviewHow much faster can you create midsurface geometry and meshes with MSC Apex? Here is a collection of industry design models where MSC Apex expedited the CAD to mesh process.
Midsurface RepairOriginal Solid Geometry
Complete Meshing of Tractor Bonnet
Shell Mesh on Midsurface
Midsurface Extraction
Auto-Thickness assigned
Company ProfileName: Mahindra and Mahindra
Industry: Off Road Vehicle
Item being midsurfaced: Bonnet
Company ProfileName: Subros
Industry: Air Conditioning Systems
Item being midsurfaced: HVAC Plastic Component
Automotive & Machinery
Benchmark Results
Component or Assembly Without MSC Apex With MSC Apex
Bonnet Assembly 8 Hours 3 Hours
Rapid Midsurface Benchmarks
Benchmark Results
Component or Assembly Without MSC Apex With MSC Apex
HVAC Plastic Component 10 Hours 3 Hours
Automatic Feature Identification & Clean UpCompany Profile
Name: Mahindra and Mahindra
Industry: Off Road Vehicle
Item being midsurfaced: Housing
Benchmark Results
Component or Assembly Without MSC Apex With MSC Apex
Housing 16 Hours 2 Hours
Final Mesh
3D Model of Bucket Wheel
3D Model of Bucket Wheel
3D view - internal details
3D view - internal details
Rotated Full Meshed Model
Rotated Full Meshed Model
Company ProfileName: ThyssenKrupp Industries
Industry: Earth moving equipment
Item being midsurfaced: Bucket Wheel
Benchmark Results
Component or Assembly With MSC Apex
Wheel Bucket 65% Time Reduction
Solid Meshing Benchmark
Company ProfileName: TLG Aerospace
Industry: Aerospace
Item being midsurfaced: Modification of an Airframe
Benchmark Results
Component or Assembly Without MSC Apex With MSC Apex
Airframe Modification 25.2 Hours 6 Hours
Pre-Mod Configuration Post-Mod Configuration
Aerospace
Rapid Midsurface Benchmark
CAD model inside MSC Apex Finite element mesh inside MSC ApexCompany Profile
Name: DEMA
Industry: Aerospace Supplier – Fuselage sections, passenger floors, tail cones, ...
Item being edited and meshed: Aircraft Avionics Door
Benchmark Results
Component or Assembly Without MSC Apex With MSC Apex
Avionics Door 16 Hours 4 Hours
Solid Meshing Benchmarks
Company ProfileName: Dynetics Technical Services
Industry: Aerospace Supplier – Fuselage sections, passenger floors, tail cones, ...
Item being edited and meshed: Fuel Pump Component
Benchmark Results
Component or Assembly Without MSC Apex With MSC Apex
Fuel Pump Component 2 Days 1 Hour
Suppress edges functions used to remove undesirable edges in a single step
Engineers sketched new surface boundaries
Local Shadows caused by round-off inaccuracies
Ideal mesh quality is seen on leading (left) and trailing (right) edges
+10x Faster Other Midsurfacing & Meshing Examples
Without MSC Apex: 40 hWith MSC Apex: 4 h
Without MSC Apex: 6 hWith MSC Apex: 30 mins
Without MSC Apex: 50 hWith MSC Apex: 3.5 h
Without MSC Apex: 6 hWith MSC Apex: 36 mins
Trailing Edge Flap
Machined Rib
Machined Door
Electronic Plastic Case
Without MSC Apex: 40 hWith MSC Apex: 1 h
Without MSC Apex: 20 hWith MSC Apex: 2 h
Train Tank Windshield Cowl Cover
Customer Testimonials
“The ability to create mid-planes on the fly and to quickly simplify
geometry for meshing purposes is unmatched.”
-TLG
“The MSC Apex Modeler mid-surface capability
has sped up our meshing process by a factor of 3.”
-Viessman Werke
“MSC Apex is easy to work with and reduced the time to build a
shell mesh from a CAD model by a factor of 2.”
-Howden Technology
“The time required to prepare the model and mesh was reduced from 8 hours to 1 hour. There is no need to go back into CAD to
change the model.”
-RSG Takasago
“MSC Apex Modeler is so easy to use and yet so enjoyable. I
complete the same work in a half day rather than 3-4 days.”
-Kaban Makina
“Apex is a modern and effective tool to prepare our 3D Cad
geometries for high quality FEM models. [...] Apex is our new
companion to meet that challenge.”
-MacGregor
Asia-PacificMSC Software (S) Pte. Ltd. 100 Beach Road#16-05 Shaw Towers Singapore 189702Telephone 65.6272.0082
Asia-PacificMSC Software Japan LTD. Shinjuku First West 8F23-7 Nishi Shinjuku1-Chome, Shinjuku-KuTokyo, Japan 160-0023Telephone 81.3.6911.1200
Europe, Middle East, AfricaMSC Software GmbHAm Moosfeld 1381829 Munich, GermanyTelephone 49.89.431.98.70
CorporateMSC Software Corporation4675 MacArthur CourtSuite 900Newport Beach, CA 92660Telephone 714.540.8900www.mscsoftware.com
The MSC Software corporate logo, MSC, and the names of the MSC Software products and services referenced herein are trademarks or registered trademarks of the MSC Software Corporation in the United States and/or other countries. All other trademarks belong to their respective owners. © 2015 MSC Software Corporation. All rights reserved.
MSCAPEX*2015NOV