INJECTION MOLDING MACHINESCincinnati Milacron 3000 Ton, 362 oz. Plastic Injection Molding Machine Model VL3000-362, S/N 3926A01/91-6 (1991), 119” x 99” Platens, 84” x 64” Between Tie Bars, Allen Bradley Pro-Set 700 PLC Control (#101)Cincinnati Milacron 3000 Ton, 362 oz. Plastic Injection Molding Machine Model VL3000-125MM, S/N 3926A01/92-2 (1992), 119” x 99” Platens, 84” x 64” Between Tie Bars, No Control (#102)Cincinnati Milacron 3000 Ton, 362 oz. Plastic Injection Molding Machine Model VL3000-362, S/N 3926A01/92-7 (1992), 119” x 99” Platens, 84” x 64” Between Tie Bars, No Control (#104)Cincinnati Milacron 3000 Ton, 288 oz. Plastic Injection Molding Machine Model VL3000-288, S/N 3926A01/92-9 (1992), 119” x 99” Platens, 84” x 64” Between Tie Bars, Ber Power Panel PLC Control (#105)Cincinnati Milacron 3000 Ton, 288 oz. Plastic Injection Molding Machine Model VL3000-288, S/N 3926A21/93-5 (1993), 119” x 99” Platens, 84” x 64” Between Tie Bars, Ber Power Panel PLC Control (#106)Cincinnati Milacron 3000 Ton, 288 oz. Plastic Injection Molding Machine Model VL3000-288, S/N H26A0193002 (1993), 119” x 99” Platens, 84” x 64” Between Tie Bars, Sepro Model 1882 Robot, Camac VEL Control (#107)HPM 1650 Ton, 260 oz. Plastic Injection Molding Machine Model H1650WP-260, S/N 96380 (1997), 98.3” x 79.5” Platens, 72.8” x 53.8” Between Tie Bars, AEC Model 2635 Robot, HPM Command 9000 Control (#127)
INJECTION MOLDING MACHINESVan Dorn 1500 Ton, 165 oz. Plastic Injection Molding Machine Model 1500HP1650277, S/N 277 (1998), 76” x 76” Platens, 52” x 52” Between Tie Bars, No Control (#130)Van Dorn Caliber Series 1430 Ton, 165 oz. Plastic Injection Molding Machine Model 1430CA165001, S/N 1 (1999), 83.1” x 74” Platens, 61.8” x 51.2” Between Tie Bars, Wittman Robot, Pathfinder 5000 Control (#131)Van Dorn Caliber Series 1100 Ton, 139 oz. Plastic Injection Molding Machine Model 1100CC68000124, S/N 124 (2000), 68.9” x 59.1” Platens, 55.1” x 45.3” Between Tie Bars, Wittman Robot, Pathfinder 5000 Control (#126)Van Dorn 1000 Ton, 165 oz. Plastic Injection Molding Machine Model 1000RS165FVBLPVV, S/N 184 (1985), 73” x 65” Platens, 52” x 44” Between Tie Bars, Wittman Robot, Plant Star Control (#116)Van Dorn 1000 Ton, 125 oz. Plastic Injection Molding Machine Model 1000HRS125FXLP, S/N 377 (1993), 65” x 65” Platens, 44” x 44” Between Tie Bars, Wittman Robot, Pathfinder Control (#203-17)
INJECTION MOLDING MACHINESVan Dorn 730 Ton, 89.6 oz. Plastic Injection Molding Machine Model 730HP4300-0038, S/N 0038 (2000), 60” x 58” Platens, 42.5” x 39.5” Between Tie Bars, Wittman Robot, Pathfinder 3000 ControlVan Dorn 500 Ton, 89.6 oz. Plastic Injection Molding Machine Model 500HT4300-0533, S/N 533 (1998), 47.8” x 47.8” Platens, 32.5” x 32.5” Between Tie Bars, Wittman Robot, Pathfinder 5000 Control (#123)Toshiba 500 Ton, 63 oz. Plastic Injection Molding Machine Model 1SG500V10-34, S/N 952205 (1999), 48.43” x 45.67” Platens, 34.25” x 31.89” Between Tie Bars, Wittman Robot, Injectvisor V10 Controls (#121)Cincinnati Milacron Vista VT 440 440 Ton, 54 oz. Plastic Injection Molding Machine Model VT440-54, S/N T39A0398053 (1999), 39.4” x 39.4” Platens, 28.9” x 28.9” Between Tie Bars, Camac 486C Control (#120)Toshiba 390 Ton, 40.9 oz. Plastic Injection Molding Machine Model 1SGS390V10-19, S/N 89503 (2000), 40.2” x 40.2” Platens, 28.7” x 28.7” Between Tie Bars, Wittman Model W621-W633 Robot, Injectvisor V10 Control (#119)Van Dorn 275 Ton, 30 oz. Plastic Injection Molding Machine Model 275H30FLP, S/N 161 (1994), 34” x 34” Platens, 23” x 23” Between Tie Bars, AEC Robot, Pathfinder 5000 Control (#132)Van Dorn 230 Ton, 25.4 oz. Plastic Injection Molding Machine Model 230HT1220-1292, S/N 1292 (2000), 32” x 32” Platens, 22” x 22” Between Tie Bars, Pathfinder 3000 Controls (#118)Cincinnati Milacron Sentry 120 Ton, 7.6 oz. Plastic Injection Molding Machine Model VS120-7.6, S/N S90A0499016, 26.5” x 26.5” Platens, 17” x 17” Between Tie Bars, Ranger Robot, Camac VSX Control(2) Assorted Wittman Robots
GRANULATORSConair 24” x 36”, 100 HP Granulator Model CK-2436, S/N 10620, in Sound Housing, w/Power Belt Feed Conveyor, Dust System, Vacuum Pump(2) Assorted AEC 30 HP & 40 HP Portable Granulators • Nelmor 25 HP Portable Granulator, in Sound Housing(3) Nelmor 20 HP & 30 HP (est.) Portable Granulators • (3) Maverick 5 HP & 15 HP Portable Granulators • Nelmor 5 HP Portable Granulator
RESIN EQUIPMENT(2) Imperial Industries Resin Storage Silos Model 60-40-12X30-0 High, S/Ns 1796-1, 1796-2, 2266 cu. ft., 45.3 Ton Cap., 40 lb./cu. ft. Max. Density(2) Schuld Mfg. Resin Storage Silos Model 12X5645-40, S/Ns 68444-2, 68444-1, 109.2 Ton Capacity(6) Conair Franklin 2000 lb. (est.) Surge Bins, with Hopper (#15, #16, #17, #18, #19, #20)(3) 2000 lb. (est.) Surge Bins, with Hopper (#21, #22, #23) • (4) 62” x 67” x 72” (est.) Overhead Resin Surge Bins500’ Assorted Aluminum Resin Distribution Pipe, with Valves & Accessories(4) Conair Franklin Portable Digital CompuDry Resin Dryers Model D06A4101310A or D06A4101310110, S/Ns ID0113, IDO114, D30689, D30517(6) Novatec Portable Resin Dryers Model MPC-750, S/Ns 12-700J-1979, 12-700J-1980, 12-700J-1984, 12-700J-1981, 12-700J-0299, 12-700J-1982(3) Conair Franklin Compu-Dry Portable Resin Dryers Model D01H4000300000, S/Ns D31847, D31829, 1D0098, with 300 lb. HopperConair Portable Dehumidifying Resin Dryer Model D200A611, S/N 300625, with 800 lb. (est.) Hopper(3) Assorted Novatec Portable Dehumidifying Resin Dryers, with 800 lb. (est.) HopperNovatec NovaDrier Resin Dryer with 600 lb. Hopper Model 10A2188, S/N 0989(3) Assorted Conair Franklin Compu-Dry Portable Resin Dryers • DriAir Industries Resin Dryer Model Arid-X100PDII, S/N D10542Novatec Twin Tank Resin Dryer Model MPC-750, S/N 10A-2186 (#3140) • (3) Novatec 2000 lb. (est.) Resin Drying Hoppers(5) Novatec 1000 lb. (est.) Resin Drying Hoppers • (3) Conair Franklin Vacuum Pumps, with Filters • (6) 5 HP & 10 HP Vacuum Pumps
COOLING WATER EQUIPMENTAEC Cooling Water Holding Tank Model Tank T1100D, S/N 93G1270, with (2) 25 HP PumpsCooling Water Holding Tank, with (2) 25 HP Pumps • Conair Tempro Cooling Water Holding Tank, with (5) Pumps (two motors missing)Trane Series Chiller Model PTAA1004XJ01A300BDG, S/N 497H04682 • (2) Evapco Platform Mounted Single-Fan Cooling TowersAEC Platform Mounted Single-Fan Cooling Tower • (3) Baltimore Air Coil Platform Mounted Galvanized Cooling Towers(2) AEC Platform Mounted Fiberglass Cooling Towers • (10) Conair, Sentra & Cincinnati Milacron Portable Temperature ControllersInnovative Water Technologies Tower Klean Cooling Tower Water Cleaning System
CRANES • FORKLIFTS • DIE FLIPPER • BURN-OFF FURNACEDemag 40 Ton x 46.5’ Span Twin Girder Bridge Crane, S/N 91025, Radio ControlDeshazo 20 Ton x 46.5’ Span Twin Girder Bridge Crane, Radio ControlWolverine 14 Ton x 30’ (est.) Radio Controlled Bridge Crane, with 100’ (est.) Self Supporting RunwayNissan 4400 lb. LP Forklift Model MCP1E2A25LV, S/N CP1F2-9P0463, Solid Tires, Overhead Guard, 187” Lift of 3-Stage MastClark 4225 lb. LP Forklift Model GCS25MB, S/N G138MB-0334-6072FA, Solid Tires, Overhead Guard, 188” Lift of 3-Stage MastDoosan 2400 lb. LP Forklift Model GC155-3, S/N PI-00300, Solid Tires, Overhead Guard, 187” Lift of 3-Stage Mast, Side Shift(30) Assorted Forklift LP Tanks • Caldwell 30 Ton Die FlipperPollution Control Products Gas Fired Controlled Pyrolysis Inert Gas Double-Door Burn-Off Furnace Model PRC 2905119, S/N N/A, 800,000 BTU, 8’ x 10’ (est.) Overall
SPRAY PAINT FINISHING LINES (to be offered as lines & as components)Mezzanine Mounted Conveyor Spray Paint Finishing Line (for removal with mezzanine), with (2) ABB Robot Spray Booths (with partial 3rd robot),Manual Spray Booth, (2) Single Pass Infrared Bake Ovens, (2) Light Duty Overhead Finishing Conveyors, Controls, 65’ x 75’ MezzanineMezzanine Mounted Conveyor Spray Paint Finishing Line (for removal with mezzanine), with (2) ABB Robot Spray Booths, (2) Manual Spray Booths, (2) Single Pass Infrared Bake Ovens, (2) Light Duty Overhead Finishing Conveyors, Controls, 65’ x 100’ MezzanineGraco Spray Paint Finishing Linew/(2) ABB Robot Spray Booths, (2) Black Body Infrared Bake Ovens, Light Duty Overhead Finishing Conveyors, Controls
PAINT KITCHENS • FINISHING CONVEYOR(2) Self Contained Paint Kitchens, with (8) Drum Mixers, Valves, Piping, Air Conditioned Room (for removal)1000’ (est.) Very Light Duty Overhead Finishing System Conveyor with Hangers on 6” Centers, with Drive
AIR COMPRESSORS • BALER • INSPECTION EQUIPMENTIngersoll Rand 250 HP Rotary Air Compressor Model SSR-EPE250-2S, S/N EE1724U98302, 990 CFM, 125 PSIG, Intellisys ControlIngersoll Rand 200 HP Rotary Air Compressor Model SSR-FPE200-2S, S/N EF1576U98279, 990 CFM, 125 PSIG, Intellisys ControlIngersoll Rand Refrigerated Air Dryer Model TM1400-TW, S/N 98KTM509, Intellisys ControlIngersoll Rand Refrigerated Air Dryer Model TM1125-TW, S/N 98JTM479, Intellisys ControlWenzel 72” x 120” x 72” (est.) Coordinate Measuring Machine Model RS1618, S/N RS941041, 72” x 120” Granite Base, with CPU36” x 60” x 6” Granite Surface Plate
CRIB STORAGE • MOLDING MACHINE REPAIR PARTS • SCRAP200’ (est.) Matching Crib Parts Storage Shelving, Multi-Drawer Storage Cabinets, Wood Top Benches$200,000 (est.) Original Cost Injection Molding Machine Repair PartsLarge Electrical Salvage & Scrap Opportunity including:Heavy Duty Electrical Distribution Panels, Electrical Wire, Switch Gear, 3000 Ton Injection Molding Machines, Scrap Steel & More
MISCELLANEOUS EQUIPMENTPowerBoss LP Rider Floor Scrubber Model TSS/82-HD, S/N 7281104Miller 300 Amp MIG Welder Model 330A/BP • Miller 200 Amp Portable MIG Welder Model Millermatic 200Wesco 1000 lb. Push-Around Electric Stacker Lift(15) Assorted Custom Automation Technologies Assembly StationsWilton 6” x 12” Belt/Disc Sander, with Tilt Tables • (25) 45” x 47” x 33” Deep Molded Plastic Drop Front Stackable Totes(7) Assorted 36” Portable Belt Conveyors • (2) Vertical Oil Storage Tanks
7
INSPECTION: Wednesday, July 12 9:00am - 4:00pm CDT
ENGINEERED PLASTIC COMPONENTS
ATTENTION: PLANT MANAGEROR MACHINERY BUYER
105 Revere Drive, Suite C
Northbrook, Illinois 60062
www.pplauctions.com
Theater Style Auction: Thursday, July 13 10:00 amINSPECTION: Wednesday, July 12 9:00am - 4:00pm CDT
PUBLIC AUCTION
300 Shellhouse Drive Rantoul, Illinois 61866
THEATER STYLE AUCTION: Thursday, July 13 10:00am
PUBLIC AUCTION
REGISTRATION & BIDDING: Everything will be sold to the highest bidders for cash, in accordance with the auctioneer’s normal “Terms of Sale”, whichare available at the site or by request at 224-927-5320. A 15% Buyer’s Premium will be added to the final bid price. All bids are in US dollars. An18% Buyer’s Premium will be added to online bids. Your bid is a contract: Place a bid only if you’re serious about buying the item. If you are thehigh bidder, you will enter into a legally binding contract with PPL Auction.PAYMENT: All successful Bidders agree to make full payment to PPL Auction at the conclusion of the sale. Only Bank Wire Transfer, BankCheck or Cashier’s Check payable to PPL Auction will be accepted. Firm and personal checks accepted only if accompanied by a letter fromyour bank guaranteeing your funds. If you are using a wire transfer your bank may wire the funds the day after the sale. All sales are subjectto sales and/or local taxes unless a signed exemption form is presented at the time of the purchase. Payment will be made in US dollars only.VERIFY DESCRIPTIONS: Note: Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warrantyor guarantee, expressed or implied, as to the accuracy of the information contained in the auction brochure, lot catalog or sale web pages.Buyer agrees to accept assets purchased per standard auction terms, “AS IS, WHERE IS, WITH ALL FAULTS” WITHOUT ANYREPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER PERSON. THERE ARE NO EXPRESSED OR IMPLIEDREPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION ORWARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.REMOVAL & RIGGING: Removal and Rigging is the responsibility of the buyer. Anyone, either a buyer or a rigger, who uses a powered vehicleto remove anything from the auction site, will be required to present a certificate of insurance. Removal may begin when the auction hascompleted and payment in full has been made. ISSUANCE OF TITLE: Titles relative to titled assets purchased will be mailed to the purchaser’s address on file after payment is received and cleared.All invoices must be paid in full at end of auction. Any merchandise not paid for at this time will be considered abandoned and may be resoldby auctioneer, any loss incurred in the resale to be borne by the original buyer.
Auction Terms & Conditions UNABLE TO ATTEND?Bid online in real time at
ON-LINE BIDS SUBJECT TO 18% BUYER’S PREMIUM
Scan with yourphone to link to ourwebsite
PPL License No. 444.000322 David Muslin License No. 441.001650 Joel Bersh License No. 441.000826 Michael L. Ackerman License No. 440.000539
105 Revere Drive, Suite C • Northbrook, Illinois 60062 Ph: 224.927.5320 • Fax: 224.927.5311 • [email protected]
