A Hilco Global CompanyVested in Your Success
31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995
www.hilcoind.com
AVAILABLE IMMEDIATELY
Littlefield, Texas
High Quality DenimFabric Production
Facility with Equipmentas New as 2013
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2
HilcoTM Industrial
(3) AVAILABLE
2012
Location:1926 FM 54
Littlefield, TX 79339
For More InformationContact:
Mark Reynolds205-403-5942
OPEN END SPINNING FRAMES
AVAILABLE IMMEDIATELY
Visit Our Website for Complete Lot Catalog www.hilcoind.com/ACG
For more information, please visit us on the web at www.hilcoind.com/ACG 3
OPEN END & RING SPINNING FRAMES
(3) AVAILABLESPINNING EQUIPMENT
3 – SCHLAFHORST MODEL AUTOCORO 8 OPEN END SPINNING FRAMES, S/Ns 161-0212-0093, 161-0212-0097, 161-0212-0103 (All 2012), 480-Positions,Spinbox SE20, Digi Piecing, (4) Automatic Packaging / Doffing Units, TubeMagazine, Corolab XQ Sensor System, Equipped with MultiLot 5 and Fancynation(Add Ons)
3 – MARZOLI MODEL FILATOIO NSF4 RING SPINNING FRAMES, S/Ns 2133, 2132,N/A (All 1998), 1,296 Spindles, Frame Retrofitted with Pinter Slubbing Unit (New2012), with Multi Count and Twist Adjustment Capability, Pinter Filament / Detector(New (2013), Frame Equipped with Automatic Bobbin Load and Off, Ring FrameLinked to Savio Orion E Automatic Bobbin Winders, S/N 371.04499 (New 2000), 33-Position Winder, Equipped with Uster Quantum Clearers and Auto Doffer, JacobiOverhead Clearer
1 – MARZOLI MODEL FILATOIO RST1 RING SPINNING FRAME, S/N 14 (2000),1,200 Spindles, Frame Retrofitted with Marzoli Slubbing Unit (New 2013), with MultiCount and Twist Adjustment Capability, Frame Equipped with Automatic Bobbin Loadand Off, Ring Frame Linked to Savio Orion E Automatic Bobbin Winders (New 2000),S/N 381.012.99, 33-Position Winder, Equipped with Uster Quantum Clearers andAuto Doffer, Jacobi Overhead Clearer
2 – MARZOLI MODEL FILATOIO RST1 RING SPINNING FRAMES, S/Ns 15, 16 (Both2000), 1,200 Spindles, Frame Retrofitted with Pinter Slubbing Unit (New 2012), withMulti Count and Twist Adjustment Capability, Pinter Filament / Detector (New (2013),Frame Equipped with Automatic Bobbin Load and Off, Ring Frame Linked to SavioOrion E Automatic Bobbin Winders, S/Ns 370.045.99 381.013.99 (New 2000), 33-Position Winder, Equipped with Uster Quantum Clearers and Auto Doffer, JacobiOverhead Clearer
ROVING FRAMES • INDIGO DYE RANGE
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4
ROVING EQUIPMENT2 – MARZOLI MODEL BANCO FT1D ROVING FRAMES,
S/Ns 20, 19 (Both 2000), 84-Spindles, 7 x 16Packages, PK 1500 Drafting, Electric Eye Stop Motion,Jacobi Overhead Cleaner and UTIT Linked BobbinTransport System
1 – MARZOLI MODEL FT1D ROVING FRAME, S/N 1(1999), 120-Spindles, 7 x 16 Packages, PK 1500Drafting, Electric Eye Stop Motion, Jacobi OverheadCleaner and Linked Bobbin Transport System
INDIGO DYE RANGE1 – MORRISON (24) BALL ROPES INDIGO DYE
RANGE (1976), 80"W, Rated at 34 Yards/Min.,Consisting Of, (24) Ball Unwind Stands, WithTie In Bars (Magazine), 2-Roll Tower Entry,With Stainless Steel Nip Pull Stand, 9" Diameter x 80" Rubber / Steel Rolls, 3-TonPneumatic Pressure, 5-HP Drive Motor, 2-RollCompensator, 80"W x 4'L x 64"D StainlessSteel Saturation Tank, with 5-Ton Lever ArmNip Stand, 16" x 80"W Rubber / Rubber Rolls,5-HP Drive Motor, Stainless Steel ExhaustHood, (2) 80"W x 4'L x 64"D Stainless SteelSaturation Tanks, With 4 & 8 Ton Nip Stand,9" x 80"W Rubber / Rubber Rolls, 3-HP DriveMotor, 3-Roll Compensator, Stainless SteelExhaust Hood, (7) 80"W x 4'L x 64"D InlineStainless Steel Indigo Dye Tanks, With 4-TonNip Stand, 9" x 80" Rubber / Steel Rolls, 3-TonPneumatic Pressure, 3-HP Drive Motor,Tension Rolls, (7) Morrison 23" Diameter x 80"Dry Cans & Exhaust Hoods, (7) 80" W x 64D"Stainless Steel Rinse Tanks, Counter FlowSystem, With 4-Ton Nip Stand, 9" x 80" Rubber/ Steel Rolls, 3-Ton Pneumatic Pressure, 3-HPDrive Motor, Tension Rolls, Morrison (56) DryCan Range, 4) Stacks Of (14) Dry Cans, 23" Diameter x 80"W, Steam Heated, WithSiphons, Rotary Joints, V-Belt Pulley Drive,Stainless Steel Exhaust Hood, 24-PositionPiddle Pallet Coiler, Associated Control Panels,Piping, Wiring, Stainless Steel & Poly SupportTanks
SLASHERS • DENIM PREP RANGE
For more information, please visit us on the web at www.hilcoind.com/ACG 5
SLASHERS1 – WEST POINT 110" DELIVERY ROLL SLASHER
HEADWAY (1976), with (2) Inline CreelStands, Each with 12 Section Beam Let-OffPositions, (2) West Point 80" Size Boxes,Double Dip, Single Nip, Rubber-Over-Stainless Steel, 10" Diameter x 80" W Rolls,Stainless Steel Dip Pan, 90" W x 32" F-B,Steam Heated, 3 Sets) Vertically Stacked DryCans, (18) Total, 30" Diameter x 83" W, SteamHeated, High Temperature, High PressureCans, Teflon Coated, With Siphons, RotaryJoints, V-Belt Pulley Drive, and Stainless SteelExhaust Hood, (2) 600-Gallon Stainless SteelJacketed Tanks (1 – Cooker, 1 –Delivery),Control Panels, Valves & Pumps
2 – IRA GRIFFIN 90" DELIVERY ROLL SLASH-ER HEADWAYS (1996/1998), Each withRotating Creel Stand, 2 Section Beam Let-OffCreels Each With 12 Section Beam Let-OffPositions, (2) Griffin 78" Size Boxes, SingleDip, Single Nip, Rubber-Over-Stainless Steel,10" Diameter x 78" W Rolls, Stainless SteelDip Pan, 90" W x 30 F-B, Steam Heated, (30)Sets Horizontally Arranged Dry Cans, SteelFrame Mounted, Dry Can Dimensions 30" Diameter x 83" Wide, Steam Heated, HighTemperature, High Pressure Cans, TeflonCoated, w/ Individual Temperature Controls,Siphons, Rotary Joints, V-Belt Pulley Drive andStainless Steel Exhaust Hood, (Open Bottom),(2) 600-Gallon Stainless Steel Jacketed Tanks(1-Cooker, 1-Delivery), Control Panels, Valves& Pumps, Motor Control Drive Panels, Piping,Wiring
DENIM PREP RANGE1 – MORRISON 90" DENIM FABRIC PREP RANGE FINISHING RANGE (1976),
Consisting of: 10'W Staging Fabric Roll Conveyor, 4-Roll Fabric Cradle Let-Off, 90"W,Pull Roll, (2 Sets) 18" Model 45 Fabric Edge Guides, Menzel Wickelsystem 90BR80" 2-Roll Fabric Brushing Unit, S/N 01154" (1989), Aztec 90" 3-Burner Fabric SingerUnit, L&W 2-Roll 90" Vertical Pad, S/N 2924, 12-Ton Lever Arm, 18" Dia. x 90"WRubber / Stainless Steel Nip Rolls w/ 10-HP Drive Motor, Morrison 2-Roll 90" VerticalPad, S/N T-154, 12-Ton Lever Arm, 18" Dia. x 90"W Rubber / Stainless Steel Nip Rollsw/ 10-HP Drive Motor, Mahlo Weft Model Orthomat Straightener, (4) Optical SensorSystem, Morrison 48-Can Dry Can Range, (4) Stacks Of 12 Dry Cans, 23" Dia. x 84"W, Steam Heated, w/ Individual Temperature Controls, Siphons, Rotary Joints, V-BeltPulley Drive, Stainless Steeel Enclosure Housing w/ Exhaust Hood, Fabric J-ScrayPull Roll, 2) 18" Specialty Model 45 Fabric Edge Guiders A-Frame Surface Winder,Control Panel, Valves & Pumps
Partial Listing Only, Please Visit Our Website
www.hilcoind.com/ACGFor Complete Lot Catalog
FABRIC FINISHING RANGE • LONG CHAIN BEAMERS • DRAWING EQUIPMENT
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6
FINISHING RANGE1 – MORRISON 80" DENIM FABRIC FINISHING RANGE (Installed 2005)
with 4-Roll 80" Fabric Cradle Let-Off, w/ J-Scray Pull Roll, SpecialtyModel 45 18" Fabric Edge Guides, Tension Rolls, Hunter 80" 2-RollFabric Brushing Unit, Hunter 80" 2-Roll Fabric Singer Unit, Hunter 80" 2-Roll Vertical Pad, 5-Ton Lever Arm Design, 12" Dia. x 80"W Rubber/ Stainless Steel Nip Rolls w/ 10-HP Drive Motor, Morrison 80" StainlessSteel Enclosed Steamer, (24/24) 6" Dia. Rolls, 100-Yard Capacity w/ Rubber / Stainless Steel Nip Rolls, 12" Diameter, 5-Ton PneumaticPressure, Hunter 80" 2-Roll Vertical Pad, 5-Ton Lever Arm Design, 12" Dia. x 80" W Rubber / Stainless Steel Nip Rolls w/ 10-HP Drive Motor,(5) 80" Stainless Steel Vertical Wash Boxes, Enclosed, (7/7) 6" Dia. Rolls,27-Yard Capacity, 12" Diam. Rubber / Stainless Steel Nip Rolls, 5-TonPneumatic Pressure, w/ Morrison 10-Can Dry Can Section, (5/5) Dry CanStack, 23" Diam. x 84"W, Steam Heated, (2) Hunter 80" 2-Roll VerticalPads, 5-Ton Lever Arm Design, 12" Diam. x 80"W Rubber / StainlessSteel Nip Rolls w/ 10-HP Drive Motor, Mahlo Weft Model OrthomatStraightener, S/N NA, (2005), (4) Optical Sensor System, Morrison 38-Can Dry Can Range, (3) Stacks Of 12 Dry Cans, 23" Diam. x 84"W,Steam Heated, Individual Temperature Controls, Siphons, Rotary Joints,V-Belt Pulley Drive, Stainless Steel Enclosure Housing w/ Exhaust Hood,Morrison Fabric J-Scray, Pull Roll, Specialty Model 45 18" Fabric EdgeGuides, A-Frame Surface Winder, Control Panel, Valves & Pumps
LONG CHAIN BEAMERS1 – REED CHATWOOD LONG CHAIN BEAMER (1976), 40" Dia. x
75"W Max. Beam Take-Up, with Tension Stand, McCoy-EllisonAccumulator, Horizontal Accumulator Stand, and Yarn Wrap StopMotion (Updated Drive System 2006), # 1
11 – REED CHATWOOD LONG CHAIN BEAMERS (1976), 40" Dia.x 75"W Max. Beam Take-Up, with Tension Stand, HorizontalAccumulator and Yarn Wrap Stop Motion (Updated Drive System2006)
DRAWING EQUIPMENT8 – RIETER MODEL RSB-D30 BREAKER DRAW FRAME AUTO
LEVELERS, (2000/1999), 40" x 48" Single Can Delivery,Stationary Creel
2 – RIETER MODEL RSB-951 BREAKER DRAW FRAME AUTOLEVELERS, (BOTH 1995), 40" x 48" Single Can Delivery,Stationary Creel
8 – RIETER MODEL RSB-851 FINISHER DRAW FRAME AUTOLEVELERS, (ALL 1995), 20" x 48" Single Can Delivery,Stationary Creel
YARN MILL LINES • BALL WARPERS • YARN CONDITIONER • BALERS
For more information, please visit us on the web at www.hilcoind.com/ACG 7
YARN MILL LINES – COTTON OPENING EQUIPMENT6 – COTTON BALE FIBER OPENING, CLEANING AND
BLENDING LINES, Each Consisting of: Rieter ModelUnifloc A10, Blendomat Fiber Bale Picker, S/N N/A(Est.1990), 180° Swivel Tower, 1.6 Meter Arm, (40)Bale Lay Down, Including Line Controls, HumpMagnet, 12" Dia. Fiber Transport Piping andTransport Fans. *Hergeth Model Reserve Chute, 60"Fiber Reserve Chute Machine, (Est. 1980's),Consisting of: 5-HP Transport Fan (Suspended),Fiber Controls 60" Fiber Condenser, with SuctionFan, Floor Mounted 5-P Transport Fan (Exit), RieterModel Uniclean B1, Fiber Opener and Cleaner, S/N N/A (New 1993), with Machine Controls, FiberTransport Fan and Waste Suction Fan *Rieter ModelAeromixer, Fiber Mixer.Blending/Reserve Unit, S/NN/A (Est. 1980's), with (3) Fiber Transport Fan, (2) Rieter Model ERM B5/5, Mono Cylinder CourseFiber Openers, S/N N/A (New 1988), with (2) FiberTransport Fans and (2) Waste Suction Fans, (2) Rieter Model Uniflex B50, Mono Cylinder FineCleaners, (New 1995), with Fiber Transport Fans andWaste Suction Fans, Including Line SupportEquipment: Rieter Line Controls, Argus FireSupression System, Argus Metal Detector
BALL WARPERS3 – BARBER COLMAN BALL WARPERS, S/Ns 54405-041-2-76,
54405-041-1-7, NA6 (1976), with 15-HP Motor, Reed Stand, MagazineCreel, 468 Live Ends, Double Sided Creel, (39) Posts Per Side, (6) Positions Per Post, 11" Vertical Spacing, 13" Horizontal Spacing,Appalachian Electronic Tensioner, Electronic Stop Motion, OverheadCleaner
2 – REED CHATWOOD BALL WARPERS, S/N 119-56770-1989 (1989), with15-HP Motor, Reed Stand, Magazine Creel, 378 Live Ends, Double SidedCreel, (32) Posts Per Side, (6) Positions Per Post, 11" Vertical Spacing,13" Horizontal Spacing, Appalachian Electronic Tensioner, Electronic StopMotion, Overhead Cleaner
1 – WEST POINT BALL WARPER, S/N 25009 (2000), with 10-HP Motor,Reed Stand, Magazine Creel, 502 Live Ends, Double Sided Creel, (39)Posts Per Side, (6) Positions Per Post, 11" Vertical Spacing, 13" HorizontalSpacing, Appalachian Electronic Tensioner, Electronic Stop Motion,Overhead Cleaner
YARN CONDITIONER1 – XORELLA MODEL CONTEXXOR YARN CONDITIONER, S/N 10220-2
(1992), 84" Dia. x 98"m +4/-1 Bar Working Pressure, 115C WorkingTemperature, 11,685-Liter Volume, 180-kW Electrically Heated and PushButton Control Panel
OPENING ROOM WASTE RECLAIMATION SYSTEM1 – INTERNATIONAL BALER CORP. MODEL C54 HORIZONTAL
HYDRAULIC BALER, S/N N/A (1990), with Twin Tank Feed System, (1) 5-Stage Vacuum Pump with 75-HP Motor, 6-Stage Vacuum Pump with100-HP Motor and Waste Collection Tank
2 – INTERNATIONAL BALER CORP. MODEL C54 HORIZONTALHYDRAULIC BALERS, S/Ns C5-1551-S1, C5-1552-S1 (Both 1995), withTwin Tank Feed System
2 – WALTERS MODEL WUP54 VERTICAL HYDRAULIC BALERS,S/Ns 668-95, 632-92 (1992/1995)
FINISHING • SEWING MACHINES • MATERIAL HANDLING
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)8
FINISHING1 – ALEXCO REROLL MACHINE, S/N 2020 (2001), with
(2) Double Roll Unwind Stands, Yardage Counter, Back LitInspection Screen, Foot Controlled, with Traversing SewingHead and Process Controls, Feed System, A-Frame DriveStand
3 – BOND FABRIC RE-INSPECTION ROLL TO ROLLMACHINE (1975), with Back Lit Inspection Screen, (2) Double Roll Winders, Yardage Counter, ProcessControls and Take Away Conveyor
1 – WILLIAMSON MODEL AIRPACK FLOW THROUGHPLASTIC WRAPPING MACHINE (Est. 1997), with VariableSpeed Drive Rolls, Feed Through Power Belt Conveyor,Transfer Conveyor, 30"W x 100'L Power Belt FeedConveyor, Ultrasonic End Sealer and Process Controls
1 – INTERNATIONAL BALE CORP. VERTICAL HYDRAULICBALER
SEWING1 – SIRUBA SERGER MODEL 757 SEWING MACHINE,
S/N F-516M2-35, with Console 1 – KANSAI MODEL DLR-1508PR 4-NEEDLE SEWING
MACHINE, S/N 0509455, with Console 1 – JUKI SINGLE NEEDLE SEWING MACHINE, with Console 1 – PFAFF DOUBLE NEEDLE SEWING MACHINE,
S/N 437937, with Consoles 1 – JUKI MODEL LH-2172-6 DOUBLE NEEDLE SEWING
MACHINE, with Console 1 – BROTHER MODEL N SERIES NEEDLE SEWING
MACHINE, S/N MA4-N31-92-61 – JUKI MODEL MFB-860 NEEDLE SEWING MACHINE,
S/N MFEXE105391 – BROTHER MODEL DH4-B980-02 NEEDLE SEWING
MACHINE, S/N D85663431 – UNION SPECIAL MODEL 63900AML 1/2 NEEDLE
SEWING MACHINE1 – JUKI MODEL DDL-5550-6 NEEDLE SEWING MACHINE1 – PEGASUS MODEL M700 NEEDLE SEWING MACHINE,
S/N 81583881 – UNION SPECIAL MODEL 35800DN SEWING MACHINE,
S/N 15028971 – JUKI MODEL DDL-5550 SINGLE NEEDLE SEWING
MACHINE, with Console1 – BROTHER MODEL S7200 SINGLE NEEDLE SEWING
MACHINE, with Console 1 – NEW YORK PRESSING MACHINE MODEL SEAL-85
STEAM CLOTHES PRESS, S/N 81782
MATERIAL HANDLING1 – HYSTER MODEL S100E 10,000-LB. LP GAS FORKLIFT
TRUCK, S/N C004D08995H, Not In Service 1 – HYSTER MODEL S50XM 3,000-LB. LP GAS FORKLIFT
TRUCK, S/N D187V23646Y, 3-Stage Mast, Side Shifter, LowLift Capacity, Not In Service
1 – NISSAN MODEL 40 3,000-LB. LP GAS FORKLIFT TRUCK,S/N D238944
1 – CATERPILLAR MODEL GC18K 3,000-LB. LP GAS FORKLIFTTRUCK, S/N A781C-02597, Not In Service
1 – CATERPILLAR MODEL V40E 3,000-LB. LP GAS FORKLIFTTRUCK, S/N 5NG01043, Not In Service
1 – NISSAN MODEL 40 3,000-LB. LP GAS FORKLIFT TRUCK,S/N C592483, 3-Stage Mast, Solid Rubber Tires, Not In Service
1 – NISSAN MODEL 40 3,000-LB. LP GAS FORKLIFT TRUCK,S/N C831727, 3-Stage Mast, Solid Rubber Tires, Not In Service
1 – NISSAN MODEL 40 3,000-LB. LP GAS FORKLIFT TRUCK,S/N C592943, 3-Stage Mast, Solid Rubber Tires
1 – CLARK MODEL Y35-522-4321 3,000-LB. LP GAS FORKLIFTTRUCK, S/N Y355-522-4321, (Out of Service)
1 – SKYJACK MODEL 3020 20' ELECTRIC SCISSOR LIFT1 – SKYJACK ELECTRIC SCISSOR LIFT, S/N N/A
MAINTENANCE SHOP • PLANT SUPPORT EQUIPMENT
For more information, please visit us on the web at www.hilcoind.com/ACG 9
PLANT SUPPORT1 – SOUTHERN MONORAIL 2-TON X 58'W DOUBLE GIRDER TOP RUNNING BRIDGE CRANE,
with 2-Ton Pendant Controlled Cable Hoist 1 – CUSTOM DESIGNED & FABRICATED 58' DOUBLE GIRDER TOP RUNNING BRIDGE
CRANE, ECSA (Engineered Crane Systems of America), with (6) Fixed Position Blowers withProgrammed Travel Computer System
1 – 58' DOUBLE GIRDER TOP RUNNING BRIDGE CRANE, ECSA (Engineered Crane Systems ofAmerica), with (6) Fixed Position Blowers
1 – 58' DOUBLE GIRDER TOP RUNNING BRIDGE CRANE, ECSA (Engineered Crane Systems ofAmerica), with (6) Fixed Position Blowers
1 – VAHLE 1-1/2 TON X 30'L SINGLE GIRDER BOTTOM RUNNING BRIDGE CRANE, withDayton 2-Ton Pendant Controlled Chain Hoist
1 – ONAN MODEL 30DDA 37.5-KVA DIESEL BACKUP GENERATOR, S/N F760138141 (1976)1 – 12'D X 80'H CARBON STEEL VERTICAL STORAGE SILO, with (2) 25-HP Roots Vacuum
Blowers, and Electric Gate Valve Please Note: Difficult Removal Due to Size1 – 32" SCALLOPED EDGE GUILLOTINE CUTTER1 – RIETER MODEL RSB-951 BREAKER DRAW FRAME AUTO LEVELER, S/N N03150-4 (1995),
40" x 48" Single Can Delivery, Stationary Creel3 – ABINGTON 6-STAGE VACUUM PUMPS, Including, (1) 125-HP, S/N HP6-9807-826,
(1) 100-HP, S/N HP6-9806-825, (1) 100-HP, S/N HP7-9410-763, Each With Abington SteelWaste Collection Tank, Overhead Collection Hopper, Motor Starters
1 – RIETER MODEL B2/5 FIBER WASTE OPENER, S/N 1012007 (1990), with 6' Conveyor FeedBelt, Hump Magnet and CMC Pre-Feed Unit
2 – ARMSTRONG RUBBER COTTS GRINDERS, S/N 8L491, BL370LARGE QUANTITY OF PLANT & PRODUCTION SUPPORT EQUIPMENT, Including: Over 300Sections of Pallet Racking - 5 Tier with Metal Decking, Metal Work Desks, Pallet Jacks, Ladders,Safety Ladders, Bench Grinders, Floor Drill Presses, Rolling Carts, Banding Machines, Floor Fans,Portable Air Cooling Unit, Work Tables, Metal Storage Cabinets, Vacuum Cleaners, Push Carts, Etc.QUANTITY OF OFFICE FURNISHINGS & BUSINESS MACHINES, Including: Desks, DeskChairs, Book Shelves, Credenza, Small Conference Tables, Filing Cabinets, Conference RoomTables with Chairs, Audio Equipment, Computers, Printers, Networking Hardware, Etc.
MAINTENANCE SHOP1 – SOUTH BEND MODEL NORDIC 25 25" X 120" GAP BED ENGINE
LATHE, S/N N315104GT0676, 35" Swing In Gap, 18 – 1400 RPM, English/ Metric Quick Change Threading, 3" Hole Through Spindle, TaperAttachment, (2) Steady Rests
1 – CLAUSING MODEL 15 16" X 50" ENGINE LATHE, S/N 6/0055/26387, 25-2,000 RPM, Quick Change Threading, 2" Hole Thru Spindle
1 – LAGUN MODEL FT2 VERTICAL MILLING MACHINE, S/N SE-5259, 9" x 48" Power Feed Table, 2.2-KW Motor, 120-4800 RPM
1 – PROMAX MODEL YCM16VA VERTICAL MILLING MACHINE, S/N 9085842, 80-2,700 RPM, 9" x 48" Power Feed Table
1 – KEMPSMITH MODEL MASTER MILL 2 PLAIN HORIZONTAL MILLINGMACHINE, S/N 12883, 12" x 56" Table, 25-1500 RPM
1 – 75-TON HORIZONTAL HYDRAULIC PRESS, 12' Bed Length 1 – DAKE MODEL 50-T VERTICAL H-FRAME PRESS, 30" Between Posts 1 – SOLBERGA MODEL SE1235 22" FLOOR TYPE DRILL PRESS,
S/N 1200, Geared Head, 48-1584 RPM, Power Downfeed 1 – WILTON MODEL 5816 16" FLOOR TYPE DRILL PRESS, S/N 152785
(Est. 1985)1 – WELLS MODEL 8M-1 HORIZONTAL BAND SAW, S/N 134531 – HYPERTHERM MODEL POWERMAX 600 PLASMA CUTTER,
S/N PMX600-0491703 – MILLER 250-AMP WELDERS, Including, (1) Dialarc HF, S/N HG047449,
Tig & Stick Leads, (1) Dialarc 250-AC/DC, S/N HK279479, Stick Leads, (1) Millermatic CP200, S/N HG002324, w/ 10A Wire Feeder
1 – MILLER MODEL BOBCAT 225 AC/DC WELDING GENERATOR, S/N KK177606
LARGE QUANTITY OF SHOP SUPPORT EQUIPMENT, Including: PortableBanding Machines, Floor Fans, Pressure Washers, A-Frame Hoist, DeWaltBand Saw, Pneumatic Tools, Hand Tools, Torch Sets, Parts Bins, WeldingTables, Metal Storage Cabinets, Floor Jack, Sand Blast Cabinet, (4) Floor DrillPresses, (5) Bench Grinders, Dake 36" H-Frame Press
HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved
Printed in USA • AME3735 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.
OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA
HilcoTM Industrial AVAILABLE IMMEDIATELY
High Quality Denim Fabric ProductionFacility with Equipment as New as 2013
Littlefield, TexasFollowUs on:
A Hilco Global Company
Vested in Your Success
