www.aveva.com AVEVA Everything3D ™ Plant Design for Lean Construction The plant industries face many new challenges in an increasingly competitive global market demanding ever bigger and more complex projects. Just as Lean Manufacturing transformed the volume manufacturing industries, so the capital industries aspire to Lean Construction in order to meet these challenges. Until now, the key enabling technologies have been absent. AVEVA Everything3D™ (AVEVA E3D™) provides these, opening the door to a new future of plant design. AVEVA E3D is the core design application within AVEVA Plant, the most comprehensive, powerful and tightly integrated plant engineering and design solution available. Not only does AVEVA E3D provide a considerable increase in design productivity, it also enables increased quality and speed of execution throughout the entire project. AVEVA E3D achieves this dramatic increase in performance by combining improved performance in design tasks with new technologies enabling novel and more efficient project execution processes. Together, these save time and cost, and eliminate many of the most common causes of costly rework in construction. AVEVA E3D has speed, quality, efficiency and standards-compliance built in. It is a design solution for the next generation of plant projects and an enabler of new, Lean Construction business processes. Rapid Project Start-up z Set up in days not months z Rapid global deployment z Reduce time to deliverables Design Efficiency z Experience new levels of design capability z Achieve project savings of up to 20% Compliance z Maintain control throughout the design chain z Adhere to regulations z Conform to corporate standards Removing Rework in Construction z Avoid costly construction errors z Save money, increase returns z Reduce and manage project risks and exposure to litigation Business Benefits Iterative comparison of the evolving design against as-constructed laser data eliminates costly rework on-site
Transcript
www.aveva.com
AVEVA Everything3D™
Plant Design for Lean Construction
The plant industries face many new challenges in an increasingly competitive global market demanding ever bigger and more complex projects. Just as Lean Manufacturing transformed the volume manufacturing industries, so the capital industries aspire to Lean Construction in order to meet these challenges. Until now, the key enabling technologies have been absent. AVEVA Everything3D™ (AVEVA E3D™) provides these, opening the door to a new future of plant design.
AVEVA E3D is the core design application within AVEVA Plant, the most comprehensive, powerful and tightly integrated plant engineering and design solution available. Not only does AVEVA E3D provide a considerable increase in design productivity, it also enables increased quality and speed of execution throughout the entire project.
AVEVA E3D achieves this dramatic increase in performance by combining improved performance in design tasks with new technologies enabling novel and more efficient project execution processes. Together, these save time and cost, and eliminate many of the most common causes of costly rework in construction.
AVEVA E3D has speed, quality, efficiency and standards-compliance built in. It is a design solution for the next generation of plant projects and an enabler of new, Lean Construction business processes.
Rapid Project Start-up
z Set up in days not months
z Rapid global deployment
z Reduce time to deliverables
Design Efficiency
z Experience new levels of design capability
z Achieve project savings of up to 20%
Compliance
z Maintain control throughout the design chain
z Adhere to regulations
z Conform to corporate standards
Removing Rework in Construction
z Avoid costly construction errors
z Save money, increase returns
z Reduce and manage project risks and exposure to litigation
Business Benefits
Iterative comparison of the evolving design against as-constructed laser data eliminates costly rework on-site
Multi-discipline 3D plant design model
z The 3D plant design model is created and modified using discipline-specific applications, each optimised for the most efficient modelling in the relevant discipline.
Laser scanning integrated in modelling
z Integrating 3D design models with high-definition laser surveys of fabrications, sub-assemblies and on-site construction enables designers to create right-first-time design and to ensure compatibility between new design and existing construction.
Advanced 3D graphics, optimised for plant design modelling
z The 3D model rendering conveys a heightened sense of spatial awareness to the designer through the use of optimised lighting, shadows and edge highlighting. This makes it easier and quicker to position objects in the model and to intuitively avoid many clashes or placement errors.
Easy to use GUI
z The Microsoft Fluent-based user interface makes functions easy to find and obvious to use. New users become proficient more quickly and experienced users more productive.
2D and 3D geometry interfaces
z AVEVA E3D provides extensive 2D and 3D geometry interfaces for effective collaboration with project partners such as equipment vendors or subcontractors.
Drafting integrated with the model
z Drafting functions directly integrated with the 3D model enable efficient first-time drafting and rapid drawing regeneration for subsequent design changes.
Design Checking
z A standard design checking capability can be further extended and configured by customisable design checking rules.
Key Features
AVEVA E3D graphics engine is optimised for design to enable the designer to recognise the depth of the 3D space more immediately
High performance in large networks
z AVEVA E3D performance is optimised for use across networks with datacentres or high latency.
Multi-discipline and multi-user collaboration
z Built-in capabilities are provided to seamlessly manage project data with many concurrent users in many different disciplines.
Built-in data management
z Access Control and Status functions ensure that each designer has the correct access to project information.
Integration of 3D data with engineering and schematic data
z Direct access to engineering information and P&IDs allows designers to use engineering and schematic information when building the 3D model. Designers can at any time compare the 3D design with its related engineering and schematic data to ensure consistent design as the project evolves.
Local customisation
z Users can create automated functions and customise the behaviour of the product to suit their preferred working methods or to increase productivity and competitive advantage.
Parallel running with AVEVA PDMS, Engineering and Diagrams
z AVEVA E3D can be run in parallel with the latest versions of AVEVA PDMS, AVEVA Engineering and AVEVA Diagrams on the same project data. This assures security of valuable data assets and eliminates many of the risks associated with upgrading any design solution.
Component rotation constrained to straddle bolt holes, as defined in the catalogue, to reduce fabrication problems
User-customisable contextual display of properties on pop-up tooltips gives immediate feedback to designers
Simple creation of projection and sectional views from a base view
AVEVA believes the information in this publication is correct as of its publication date. As part of continued product development, such information is subject to change without prior notice and is related to the current software release. AVEVA is not responsible for any inadvertent errors. All product names mentioned are the trademarks of their respective holders.
Copyright 2012 AVEVA Solutions Limited and its subsidiaries. All rights reserved. AE3D/DS/12.
AVEVA Worldwide Offices | www.aveva.com/officesAVEVA Everything3D is one of AVEVA’s Design products, which create 3D models for detailed design and produce all associated deliverables
Design Checker captures knowledge and standards to provide automatic validation of compliance
