Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

Awarding of the

Carl von Bach Medal 2016

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

Carl von Bach Medal 2016

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

Carl von Bach Commemorative Medal

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

Dr. Arun Kumar Bhaduri

Senior Professor, Homi Bhabha National Institute,

Distinguished Scientist & Director,

Indira Gandhi Centre for Atomic Research, Kalpakkam, India

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

2015 Venus Wires Award (Best Technical Paper In Stainless Steel Application)

2014 Best Presentation Award (ICEMP 2014, Bhubaneswar)

2012 D&H Sceheron Award (Best Presentation Paper, NWS-2011)

2012 H.D.Govindaraj Memorial Award (2nd

Best Research Paper, NWS-2011)

2012 Best Poster Award (3rd

Asian Symposium on Materials and Processing)

2010 ESAB INDIA Award (Best Technical Paper–All Categories, NWS-Dec-09)

2010 2nd

Best Oral Presentation Award (Material Processing, 64th ATM, Bangalore)

2009 I.T.Mirchandani Memorial Award (Best Research Paper, NWS-Feb-09)

2009 Eutectic Award (Best Repair & Reclamation Paper, NWS-Feb-2009)

2009 K.C.P. Award (Best Process/Fabrication Paper, IIW-IC-2008)

2009 2nd

Best Poster Presentation Award (Symposium B, 63rd

ATM, Kolkata)

2007 Best Poster Presentation Award (Microstructural & Phase Evolution)

2007 H.D.Govindaraj Memorial Award (Best Research Paper, NWS-2006)

2006 2nd

Best Research Scholar Paper Award (NWS-2006)

2006 H.D.Govindaraj Memorial Award (Best Research Paper, NWS-2005)

2006 Weldmen Award (2nd

Best Presentation Paper, NWS-2005)

2006 3rd

Best Paper Award (Oral Presentation)

2005 K.C.P. Award (2nd

Best Process/Fabrication Paper, IIW-IC-2005)

2005 Weldmen Award (Best Poster Paper, IIW-IC-2005)

2004 H.D.Govindaraj Memorial Award (Best Research Paper, NWS-2003)

2003 H.D.Govindaraj Memorial Award (Best Research Paper, NWS-2003)

2003 Eutectic Award (Best Repair & Reclamation Paper, NWS-2003)

2002 I.T.Mirchandani Memorial Award (Best Research Paper, NWS-2002)

2002 D&H Sceheron Award (Best Presentation Paper, NWS-2002)

2000 2nd

Best Paper Award (NWM-2000)

1997 Weldmen Award (Best Poster Paper, IWC-1996)

1986 I.T.Mirchandani Memorial Award (Best Research Paper, NWS-1985)

July 2016 – Director, Board of Directors, Bharatiya Nabhikiya Vidyut Nigam Limited (BHAVINI)

July 2016 – Director, Board of Directors, International Institute of Welding

2016 – Senate Member, National Institute of Technology, Puducherry

2015 – 2016 Chairman, Standing Committee for Engineering Sciences, HBNI (Kalpakkam)

2014 – Vice-Chair, Commission–II (Arc Welding & Filler Metals), International Institute of Welding

2013 – Member, Editorial Board, Indian Journal of Materials Science

2013 – 2016 Member, Editorial Board, International Journal of Nuclear Energy

2013 – 2016 Member, Sectional Committee – VIII (Mining, Met & Mater Engg), INAE

2009 – 2013 Visiting Faculty, Indian Institute of Technology, Madras (Chennai)

2008 – 2012 Vice President, Indian Institute Welding

2008 – Member, Editorial Board, Welding in the World

2007 – Member, Editorial Board, Journal of Materials Processing Technology

2007 – 2010 Member, Technical Management Board, International Institute of Welding

2005 – 2008 Chairman, Technical Committee, Indian Institute Welding

2003 – Council Member, Indian Institute Welding

2002 – Editor, Indian Welding Journal

1997 – 2003 Editor, Transactions of the Indian Institute of Metals

1992 – 1997 Associate Editor, Transactions of the Indian Institute of Metals

1996 – 1999 Chairman, Technical Commission IX, Indian Institute of Welding

Dr. Arun Kumar Bhaduri

Quelle: http://global.kawasaki.com/en/stories/hydrogen/

Speicher Stockach

2016 IIW-India Golden Jubilee Welding Ratna Award, Indian Institute of Welding

2015 DAE Group Achievement Award – 2014 for Development of Indian Reduced Activation Ferritic Martensitic (INRAFM) Steel for India’s Test Blanket Module (TBM) in ITER (#9)

2015 DAE Group Achievement Award – 2014 for Design, Numerical and Experimental Simulations, Development and Qualification of Principal Fuel Handling Machines of PFBR (#8)

2013 DAE Group Achievement Award – 2012 for Design, Development & Manufacture of Titanium Dissolver for Fast Reactor Fuel Reprocessing (#7)

2013 DAE Group Achievement Award – 2012 for Setting up of an Inert Atmosphere Glove Box Train Facility and Fabrication of Qualified Sodium Bonded Metallic Fuel Pins containing U-6Zr, EU-6Zr, U-Pu-Zr Metal Slugs for Test Irradiation in FBTR (#6)

2011 DAE Group Achievement Award – 2010 for Design & development of Roof Slab for PFBR (#5)

2010 Sir LP Mishra Memorial Lecture Award, Indian Institute of Welding

2010 DAE Group Achievement Award – 2009 (Group Leader) for Selection and Development of Hardfacing Technology for PFBR (#4)

2009 DAE Group Achievement Award – 2008 (Group Leader) for Insitu Repair Welding of Steam Turbines of NPCIL (#3)

2009 DAE Group Achievement Award – 2008 for Design & Manufacturing of Grid Plate for PFBR (#2)

2008 VASVIK Award – 2005 in Material & Metallurgical Sciences & Technology, Vividhlaxi Audyogik Samshodhan Vikas Kendra, Mumbai

2008 DAE Group Achievement Award – 2006 (Group Leader) for PEAF-TIG Welding of Dummy Fuel Sub-Assemblies of PFBR (#1)

2007 Homi Bhabha Medal for Overall Topper of 27th Batch, BARC Training School, DAE

2007 Fellow, Indian National Academy of Engineering

2003 INS Medal Award – 2002, Indian Nuclear Society

2003 Fellow, Indian Institute of Metals

2003 National Metallurgists’ Day – Metallurgist of the Year Award, Ministry of Steel, Government of India

2003 Homi Bhabha Science and Technology Award – 2002,

Department of Atomic Energy (DAE), Government of India

2000 Fellow, Indian Institute of Welding

1984 Homi Bhabha Prize for 1st Rank in Metallurgy Discipline, 27

th Batch, BARC Training School

Awards & Honors

Professional Recognitions

Best Paper Awards

Fellow, Indian National Academy of Engineering (FNAE)

Fellow, Indian Institute of Metals (FIIM)

Fellow, Indian Institute of Welding (FIIW)

Life Member, Materials Research Society of India (LMMRSI)

Life Member, Indian Society for Non-Destructive Testing (LMISNT)

Life Member, Indian Nuclear Society (LMINS)

Professional Affiliations

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

Alexander von Humboldt Research Fellowship

0 5 10 15 20 25 30200

300

400

500

600

700

800

900

1000

Rosenthals equation

Measured peak temperatures

Tem

pera

ture

/ °C

Distance from weld center / mm

1994-1995 at MPA Stuttgart

Assessment of creep

behavior and creep rupture

strenght of welded joints

Specific achievements:

Progress in numerical assessment of ferritic welded

joints by modelling different zones based on

temperature influence during welding

HAZ

1 32 23 1

HAZWMBM BM

fine grain coarse grain

Temperature distribution during welding,

described by Rosenthal´s equationModelling of different zones

with different material behavior

numerical assessment

Prediction of local strain

and stress field and damage

development

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

Demanding the Real Life Experience…

In the Welding Shop

Running the

Gleeble Equipment at MPA

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

Projects in the framework of the Indo-German collaboration scheme

- Creep life assessment studies

- Weld assessment

- Fracture mechanics studies on martensitic steels

Encouraged scientists to research stays at MPA:

V.S. Srinivasan, C.R. Das, G. Sasikala…

Hosted numerous meetings with MPA staff at IGCAR and organised

Indo-German collaboration workshops

Continuation in Numerous Cooperations…

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

until Today …

Materials and materials date for Advanced Ultra Supercritical Plants

Optimised design of components is based on

availability and reliability of material data and

knowledge about deformation and damage

behaviour

Material testing considering specific service

conditions:

• Physical and chemical properties

• Mechanical properties: strength and

deformation, ductility

• Creep properties:

Creep Rupture Strength

Creep Curves

• Low cycle Fatigue properties

• Influence of aging and manufacturing on

these properties

• Properties of Welded joints

• Crack resistance:

Crack initiation and growth under different

loading conditions: static, cyclic, creep

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

MPA Seminar 2015

… and Always a True Friend

Prof. Dr.-Ing. S. Weihe Stuttgart, 04.10.201642nd MPA-Seminar 2016

the Man who Looks Beyond …

Quelle: http://www.csn-deutschland.de/blog/2009/10/24/neues-zur-umwelterkrankung-mcs-die-erde-ist-eine-scheibe/