Home >Documents >Axial fans - HUA and VLA fans - Heinen & Hopman · Axial fans - HuA and VLA fans. Our mission: ......

Axial fans - HUA and VLA fans - Heinen & Hopman · Axial fans - HuA and VLA fans. Our mission: ......

Date post:20-Aug-2018
Category:
View:239 times
Download:1 times
Share this document with a friend
Transcript:
  • >

    Ventilation Air Conditioning RefrigerationHeating

    22CInsideOUTSIDE

    HUMIDITY

    PROVIDED BYHEINEN & HOPMAN

    35 C

    90%

    productsAxial fans - HuA and VLA fans

  • Our mission:To ensure you the

    perfect climate indoors, regardless of theweather outside.

    AxiAl fAns

    With our wide range of fans, we can offer you the ultimate ventilation system for each situation. Our high quality fans are designed to with-stand all climate conditions. The fans comply with all requisite class and government regulations.

    Option

    The axial fans are available in different materials: - galvanized steel (standard) - primed and painted steel - marine corrosion-resistand aluminium - stainless steel The axial fans are used for the mechanical ventilation or areas such as engine rooms, cargo holds and pump rooms. The fans are available for both indoor and outdoor installations in standard formats or in special designs.

    ATEX The fans can optionally be supplied in explosion-proof design.

    Classification

    RMRS

    LES

    DNV-GL

    ABS

    BV

    RINA

  • HUA-s, HUA-l And VlA fAns

    ApplicationThe high-performance HUA-S / HUA-L (medium pressure) and VLA (high pressure, with outlet guide vanes) axial fans convey clean and slightly dusty air. Made of a highly corrosion-resistant aluminum alloy, the impellers ensure high efficiency and low noise levels. 30 fan types are available with flow rates up to 225.000 m/h and pressures up to 2,200 Pa. Comprehensive accessories and special designs allow easy adaptation to the most diverse requirements. Casing Made of steel, welded, with rolled flanges on both sides according to DIN 82330 and welded motor bracket. Optimal surface protection thanks to hot-dip galvanizing. Special coatings and casing thickness of 6 mm, 8 mm and 10 mm are available on request. HUA-S fans have a short casing. HUA-L fans have a long casing. The casings of the VLA type fans have outlet guide vanes. Casing orientation and direction of air delivery The standard direction of air delivery is impeller-motor. On request, the direction of air delivery for the fans can be changed in motor-impeller. impeller - HUA High-performance axial impeller. Hub and impeller blades made of a highly corrosion-

    resistant aluminium alloy (sea-water-proof). Blades are adjustable at standstill. Easy-to-assemble shaft/hub connection. Dynamically balanced. impeller - VlA Impeller is infinitely adjustable at standstill. Aero-foil section blades made of high-tensile aluminium cast alloy DN 315-1120. DN 1250 with corrosion-resistant polygon hub. Easy-to-assemble shaft/hub connection with taper lock bush. High-strength hollow-profiled blades of sheet steel. Dynamically balanced.

    Additional accessoiries

    Pair of mounting feet for floor or ceiling installation

    Inlet cone with protective grill Protective grill Counter flange galvanized standard

    thickness (for connection to ducts, etc.)

    Counter flange shop-painted (for welding to constructions)

    Plain flange galvanized or shop-painted

    Flexible connection of synthetic fabric with two flanges

    Inspection door in fan casing optional starting from DN 500

    Anti-vibration mounting for vertical intallation

    Casing extenstion

    To stand with our clients in the harshest environments

    Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

  • specifications HUA-s / HUA-l series

    Medium pressure - Axial fan with direct drive HUA-S / HUA-L series, DN 250 - DN 1600

    Size diameter

    DN

    Motor size

    d0 D2 Lk x n x d L X max

    L1 Weight (kg)

    250 71-80 252 355 325x12x14 180 58 300 10-20

    280 71-80 283 387 355x12x14 240 58 320 12-22

    315 71-80 317 422 390x12x14 240 58 400 14-23

    355 71-90 357 462 430x16x14 303 96 404 24-33

    400 71-100 402 507 475x16x14 303 145 505 34-48

    450 71-100 452 558 525x20x14 378 73 504 33-56

    500 80-132 502 608 575x20x14 378 112 630 36-100

    560 80-132 562 689 650x20x18 480 112 640 49-109

    630 80-132 632 759 720x20x18 555 112 740 67-111

    710 80-132 713 839 800x20x18 555 112 740 81-167

    800 90-160 804 932 890x24x18 585 138 780 108-225

    900 100-180 905 1032 990x24x18 675 154 900 144-287

    1000 100-200 1005 1135 1090x28x18 675 19 900 171-401

    1120 112-225 1128 1275 1230x28x24 810 91 1080 328-460

    1250 132-280 1258 1411 1360x28x24 810 285 1080 410-903

    1400 160-280 1410 1561 1510x32x24 1000 285 1670 485-978

    1600 160-315 1610 1762 1710x36x24 1200 322 2000 545-1333

    Weight depending on motor size

    HUA-S 250 - 1600 HUA-L 250 - 1250

    d0LK

    x n

    x d

    D2

    L1

    d0LK

    x n

    x d

    D2

    L X max

    d0LK

    x n

    x d

    D2

    L X max

    Air direction Air direction

    Dimensions in mm

  • 250mm, HUA

    2-pole [N = 2800 1/min] 4-pole [N = 1330 1/min]

    280mm, HUA

    2-pole [N = 2800 1/min] 4-pole [N = 1330 1/min]

    Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • 315mm, HUA 355mm, HUA

    2-pole [N = 2830 1/min] 2-pole [N = 2875 1/min]

    400mm, HUA

    2-pole [N = 2890 1/min]

    Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • 450mm, HUA

    2-pole [N = 2890 1/min] 4-pole [N = 1400 1/min]

    500mm, HUA

    2-pole [N = 2910 1/min] 4-pole [N = 1400 1/min]

    Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • 560mm, HUA

    2-pole [N = 2920 1/min] 4-pole [N = 1440 1/min]

    630mm, HUA

    2-pole [N = 2940 1/min] 4-pole [N = 1440 1/min]

    Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    710mm, HUA

    2-pole [N = 2940 1/min] 4-pole [N = 1445 1/min]

    800mm, HUA

    2-pole [N = 1445 1/min] 4-pole [N = 964 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    900mm, HUA

    4-pole [N = 1460 1/min]

    1000mm, HUA

    4-pole [N = 1465 1/min] 6-pole [N = 965 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    1120mm, HUA

    4-pole [N = 1465 1/min] 6-pole [N = 970 1/min]

    1250mm, HUA

    4-pole [N = 1475 1/min] 6-pole [N = 975 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    1400mm, HUA

    4-pole [N = 1475 1/min] 6-pole [N = 975 1/min]

    1600mm, HUA

    6-pole [N = 980 1/min] 8-pole [N = 730 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    specifications VlA series

    Medium pressure - Axial fan with direct drive VLA series, DN 315 - DN 1250

    Size diameter

    DN

    Motor size

    d0 D2 Lk x n x d X max

    L Weight (kg)

    315 71-80 317 422 390x12x14 125 240 23-29

    355 71-80 357 462 430x16x14 120 303 27-46

    400 71-100 402 507 475x16x14 170 303 34-48

    450 71-100 452 558 525x20x14 155 378 39-66

    500 71-112 502 608 575x20x14 220 378 45-109

    560 80-132 562 689 650x20x18 135 480 58-119

    630 80-132 632 759 720x20x18 40 555 74-121

    710 90-180 713 839 800x20x18 220 555 117-232

    800 100-200 804 932 890x24x18 250 585 168-301

    900 112-225 905 1032 990x24x18 290 675 221-417

    1000 132-250 1005 1135 1090x28x18 325 675 320-531

    1120 132-250 1128 1275 1230x28x24 190 810 402-575

    1250 132-280 1258 1411 1360x28x24 320 1080 786-1210

    L X max

    d0LK

    x n

    x d

    D2

    Air direction

    L X max

    d0LK

    x n

    x d

    D2

    Air direction

    160

    VLA 315 - 1120 VLA 1250

    Weight depending on motor size

    Dimensions in mm

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    315mm, VlA 355mm, VlA

    2-pole [N = 2875 1/min] 2-pole [N = 2885 1/min]

    400mm, VlA

    2-pole [N = 2890 1/min] 4-pole [N = 1400 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    450mm, VlA 2-pole [N = 2980 1/min] 4-pole [N = 1420 1/min]

    500mm, VlA

    2-pole [N = 2930 1/min] 4-pole [N = 1450 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    560mm, VlA

    2-pole [N = 2940 1/min] 4-pole [N = 1440 1/min]

    630mm, VlA

    4-pole [N = 1445 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    710mm, VlA

    2-pole [N = 2935 1/min] 4-pole [N = 1450 1/min]

    800mm, VlA 900mm, VlA

    4-pole [N = 1460 1/min] 4-pole [N = 1450 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    1000mm, VlA

    4-pole [N = 1470 1/min]

    1120mm, VlA

    4-pole [N = 1475 1/min] 6-pole [N = 977 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    1250mm, VlA

    4-pole [N = 1480 1/min] 6-pole [N = 980 1/min]

    All indicated values for 400V/50Hz/3~. (60 Hz on request)

  • Size diameter

    DN

    H B e i i2 c d1 LK n d ca. [kg]

    (in set)

    250 180 40 220 190 190 20 10.5 325 x 2 x 14.5 0.5

    280 205 45 205 165 165 22.5 10.5 355 x 2 x 14.5 0.7

    315 230 50 293 250 250 25 10.5 390 x 2 x 14.5 1.2

    355 261 50 317 250 270 25 11.5 430 x 4 x 14.5 1.4

    400 284 50 351 280 300 25 11.5 475 x 4 x 14.5 1.5

    450 309 50 395 324 324 25 11.5 525 x 4 x 15 1.9

    500 334 50 438 360 360 25 11.5 575 x 4 x 15 2.1

    560 400 50 440 380 380 25 11.5 650 x 4 x 18.5 2.5

    630 435 50 526 420 462 25 12 720 x 4 x 18.5 3.5

    710 495 65 688 546 546 32.5 14 800 x 6 x 18.5 7.8

    800 560 65 760 610 610 32.5 14 890 x 6 x 18.5 13.2

    900 590 65 840 680 660 32.5 14 990 x 6 x 18.5 16.7

    1000 642 65 930 730 730 32.5 14 1045 x 8 x 18.5 18.7

    1120 706 80 950 700 760 40 14 1230 x 8 x 24 22.6

    1250 780 80 1050 786 786 40 18 1360 x 8 x 24 25.7

    1400 900 80 1080 768 768 40 18 1510 x 8 x 24 30.5

    1600 1000 80 1200 818 818 40 18 1710 x 8 x 24 32.7

    Z03Mounting foot for fan

    Size diameter

    DN

    D1 D2 D3 L LK n d LK1n1d1 ca. [kg]

    250 252 308 381 165 286 x 8 x 9.5 356 x 8 x 9.5 3.5

    280 283 354 415 165 332 x 8 x 11.5 395 x 8 x 11.5 4.0

    315 317 381 471 165 356 x 12 x 11.5 438 x 12 x 11.5 4.6

    355 357 415 519 165 395 x 12 x 11.5 486 x 12 x 11.5 5.2

    400 402 471 565 165 438 x 12 x 11.5 541 x 12 x 11.5 6.0

    450 452 519 636 165 486 x 12 x 11.5 605 x 16 x 14 7.3

    500 502 565 689 165 541 x 12 x 11.5 648 x 16 x 14 9.3

    560 562 636 710 165 605 x 16 x 14 674 x 16 x 14 9.7

    630 632 719 792 185 674 x 16 x 14 755 x 16 x 14 14.5

    710 713 799 886 185 755 x 16 x 14 841 x 16 x 14 17.1

    800 804 897 1091 195 841 x 16 x 14 1045 x 16 x 14 24.7

    900 905 997 1195 225 945 x 16 x 14 1175 x 16 x 14 30.5

    1000 1005 1097 1237 225 1045 x 16 x 14 1175 x 16 x 12 34.2

    1120 1128 1216 1370 270 1175 x 20 x 14 1311 x 20 x 14 39.2

    1250 1258 1360 1520 270 1311 x 20 x 14 1469 x 20 x 14 45.7

    1400 1410 1520 1690 330 1469 x 24 x 14 1665 x 24 x 14 58.5

    1600 1610 1732 1900 400 1665 x 24 x 14 1856 x 24 x 14 69.2

    Z04Inlet nozzle with protective guard

    Z54Inlet nozzle

    Z05Protective guard (impeller side)

    Dimensions in mm

    Dimensions in mm

    For horizontal installation, (2 pcs per fan)

  • Size diameter

    DN

    D1 D2 D3 L LK n d LK1n1d1 ca. [kg]

    250 252 308 381 165 286 x 8 x 9.5 356 x 8 x 9.5 3.4

    280 283 354 415 165 332 x 8 x 11.5 395 x 8 x 11.5 3.8

    315 317 381 471 165 356 x 12 x 11.5 438 x 12 x 11.5 4.4

    355 357 415 519 165 395 x 12 x 11.5 486 x 12 x 11.5 4.9

    400 402 471 565 165 438 x 12 x 11.5 541 x 12 x 11.5 5.7

    450 452 519 636 165 486 x 12 x 11.5 605 x 16 x 14 6.9

    500 502 565 689 165 541 x 12 x 11.5 648 x 16 x 14 8.8

    560 562 636 710 165 605 x 16 x 14 674 x 16 x 14 9.1

    630 632 719 792 185 674 x 16 x 14 755 x 16 x 14 13.8

    710 713 799 886 185 755 x 16 x 14 841 x 16 x 14 15.9

    800 804 897 1091 195 841 x 16 x 14 1045 x 16 x 14 23.2

    900 905 997 1195 225 945 x 16 x 14 1175 x 16 x 14 27.1

    1000 1005 1097 1237 225 1045 x 16 x 14 1175 x 16 x 12 30.2

    1120 1128 1216 1370 270 1175 x 20 x 14 1311 x 20 x 14 34.0

    1250 1258 1360 1520 270 1311 x 20 x 14 1469 x 20 x 14 39.6

    1400 1410 1520 1690 330 1469 x 24 x 14 1665 x 24 x 14 50.3

    1600 1610 1732 1900 400 1665 x 24 x 14 1856 x 24 x 14 62.8

    Size diameter

    DN

    Da Li LK n d ca. [kg]

    250 254 8.0 286 x 4 x 9.5 0.2

    280 274 8.0 332 x 4 x 11.5 0.2

    315 314 8.0 356 x 6 x 11.5 0.3

    355 354 8.0 395 x 6 x 11.5 0.4

    400 394 8.0 438 x 6 x 11.5 0.5

    450 454 8.0 486 x 6 x 11.5 0.6

    500 494 8.0 541 x 6 x 11.5 0.7

    560 554 8.0 605 x 8 x 14 0.9

    630 634 8.0 674 x 8 x 14 1.1

    710 709 9.0 755 x 8 x 14 2.1

    800 784 9.0 841 x 8 x 14 2.6

    Size diameter

    DN

    Da Li LK n d ca. [kg]

    250 234 18.0 286 x 4 x 9.5 0.1

    280 274 18.0 332 x 4 x 11.5 0.2

    315 274 18.0 356 x 6 x 11.5 0.2

    355 334 18.0 395 x 6 x 11.5 0.3

    400 374 18.0 438 x 6 x 11.5 0.3

    450 414 18.0 486 x 6 x 11.5 0.4

    500 494 18.0 541 x 6 x 11.5 0.5

    560 534 18.0 605 x 8 x 14 0.6

    630 614 18.0 674 x 8 x 14 0.7

    710 687 22.0 755 x 8 x 14 1.2

    800 762 22.0 841 x 8 x 14 1.5

    900 862 21.0 945 x 8 x 14 3.4

    1000 962 21.0 1045 x 8 x 14 4.0

    1120 1080 21.0 1175 x 10 x 14 5.2

    1250 1180 21.0 1311 x 10 x 14 6.1

    1400 1380 21.0 1469 x 12 x 14 8.2

    1600 1580 46.0 1665 x 12 x 14 6.4

    Z07

    Protective guard (motor side)

    Size diameter

    DN

    D1 D2 L LK n d ca. [kg]

    250 252 308 30 286 x 8 x 9.5 0.7

    280 283 354 40 332 x 8 x 11.5 1.1

    315 317 381 40 356 x 12 x 11.5 1.1

    355 357 415 40 395 x 12 x 11.5 1.2

    400 402 471 40 438 x 12 x 11.5 1.5

    450 452 519 40 486 x 12 x 11.5 2.0

    500 502 565 50 541 x 12 x 11.5 2.5

    560 562 636 60 605 x 16 x 14 3.3

    630 632 719 60 674 x 16 x 14 4.0

    710 713 799 70 755 x 16 x 14 4.9

    800 804 897 80 841 x 16 x 14 6.2

    900 905 997 100 945 x 16 x 14 8.1

    1000 1005 1097 100 1045 x 16 x 14 9.0

    1120 1128 1216 125 1175 x 20 x 14 11.7

    1250 1258 1360 125 1311 x 20 x 14 13.6

    1400 1410 1520 125 1469 x 24 x 14 15.6

    1600 1610 1732 125 1665 x 24 x 14 18.4

    Z08 Counter flange

    Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    Dimensions in mm

    Dimensions in mm

    Dimensions in mm

    Dimensions in mm

  • Size diameter

    DN

    D1 D2 L LK n d ca. [kg]

    250 252 308 120 286 x 8 x 9.5 1.5

    280 283 354 120 332 x 8 x 11.5 2.4

    315 317 381 120 356 x 12 x 11.5 2.4

    355 357 415 120 395 x 12 x 11.5 2.6

    400 402 471 120 438 x 12 x 11.5 3.3

    450 452 519 120 486 x 12 x 11.5 4.4

    500 502 565 170 541 x 12 x 11.5 5.5

    560 562 636 170 605 x 16 x 14 7.3

    630 632 719 170 674 x 16 x 14 8.8

    710 713 799 220 755 x 16 x 14 10.8

    800 804 897 220 841 x 16 x 14 13.6

    900 905 997 220 945 x 16 x 14 17.8

    1000 1005 1097 320 1045 x 16 x 14 19.8

    1120 1128 1216 320 1175 x 20 x 14 25.7

    1250 1258 1360 320 1311 x 20 x 14 29.9

    1400 1410 1520 320 1469 x 24 x 14 34.3

    1600 1610 1732 320 1665 x 24 x 14 40.5

    Z10 Flexible Sleeve

    Z11 Duct extension long

    Size diameter

    DN

    D1 D2 L LK n d ca. [kg]

    250 252 308 120 286 x 8 x 9.5 2.2

    280 283 354 160 332 x 8 x 11.5 3.3

    315 317 381 160 356 x 12 x 11.5 3.5

    355 357 415 202 395 x 12 x 11.5 4.6

    400 402 471 202 438 x 12 x 11.5 5.4

    450 452 519 252 486 x 12 x 11.5 8.9

    500 502 565 252 541 x 12 x 11.5 9.7

    560 562 636 320 605 x 16 x 14 13.6

    630 632 719 370 674 x 16 x 14 21.3

    710 713 799 370 755 x 16 x 14 24.0

    800 804 897 390 841 x 16 x 14 38.1

    900 905 997 450 945 x 16 x 14 48.1

    1000 1005 1097 450 1045 x 16 x 14 53.4

    1120 1128 1216 540 1175 x 20 x 14 86.5

    1250 1258 1360 540 1311 x 20 x 14 98.7

    1400 1410 1520 670 1469 x 24 x 14 134.7

    1600 1610 1732 800 1665 x 24 x 14 182.1

    Size diameter

    DN

    D1 D2 L A LK n d ca. [kg]

    250 252 308 286 x 8 x 9.5 2.2

    280 283 354 332 x 8 x 11.5 3.3

    315 317 381 356 x 12 x 11.5 3.5

    355 357 415 395 x 12 x 11.5 4.6

    400 402 471 438 x 12 x 11.5 5.4

    450 452 519 486 x 12 x 11.5 8.9

    500 502 565 541 x 12 x 11.5 9.7

    560 562 636 605 x 16 x 14 13.6

    630 632 719 674 x 16 x 14 21.3

    710 713 799 755 x 16 x 14 24.0

    800 804 897 841 x 16 x 14 38.1

    900 905 997 945 x 16 x 14 48.1

    1000 1005 1097 1045 x 16 x 14 53.4

    1120 1128 1216 1175 x 20 x 14 86.5

    1250 1258 1360 1311 x 20 x 14 98.7

    1400 1410 1520 1469 x 24 x 14 134.7

    1600 1610 1732 1665 x 24 x 14 182.1

    Z20 Automatic shutter

    Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    Dimensions in mm

    Dimensions in mm

    Dimensions in mm

  • DN L LG Di Da Dk H i Lk n m63 Hz

    125 Hz

    250 Hz

    500 Hz

    1000 Hz

    2000 Hz

    4000 Hz

    8000 Hz

    ca. [kg]

    63 Hz

    125 Hz

    250 Hz

    500 Hz

    1000 Hz

    2000 Hz

    4000 Hz

    8000 Hz

    ca. [kg]

    315 450 454 317 455 - 230 400 356 x 12 x M8 2 4 8 12 13 10 7 6 18 - - - - - - - - -

    315 1200 1204 317 455 - 230 1150 356 x 12 x M8 4 8 16 23 26 19 14 12 36 - - - - - - - - -

    355 450 454 357 515 - 261 400 395 x 12 x M8 2 4 6 8 10 8 6 5 20 - - - - - - - - -

    355 1200 1204 357 515 - 261 1150 395 x 12 x M8 4 7 12 14 21 15 11 10 39 - - - - - - - - -

    400 450 454 402 560 - 284 400 438 x 12 x M8 2 3 6 9 13 10 7 6 21 - - - - - - - - -

    400 1200 1204 402 560 - 284 1150 438 x 12 x M8 4 6 12 16 21 16 12 10 42 - - - - - - - - -

    450 450 454 452 610 - 309 400 486 x 12 x M8 2 3 6 11 12 9 6 5 24 - - - - - - - - -

    450 1200 1204 452 610 - 309 1150 486 x 12 x M8 3 6 12 19 19 14 11 9 48 - - - - - - - - -

    500 450 454 502 660 - 334 400 541 x 12 x M8 2 3 4 7 12 9 6 5 28 - - - - - - - - -

    500 1200 1204 502 660 - 334 1150 541 x 12 x M8 3 5 8 11 20 15 11 9 53 - - - - - - - - -

    560 700 704 562 760 - 400 650 605 x 16 x M10 2 3 6 11 14 10 8 7 43 - - - - - - - - -

    560 1950 1954 562 760 - 400 1900 605 x 16 x M10 4 7 11 17 21 16 12 10 94 - - - - - - - - -

    630 700 705 632 830 - 435 650 674 x 16 x M10 2 3 6 15 12 9 7 5 52 - - - - - - - - -

    630 1950 1955 632 830 - 435 1900 674 x 16 x M10 4 6 11 22 19 15 11 9 108 - - - - - - - - -

    710 700 706 713 910 284 495 635 755 x 16 x M10 2 3 5 9 12 9 6 5 57 3 5 10 13 17 13 8 6 56.6

    710 1950 1956 713 910 284 495 1885 755 x 16 x M10 4 6 9 12 19 15 10 9 119 8 15 25 32 41 29 17 11 118.6

    800 700 708 804 1000 320 540 635 841 x 16 x M10 2 2 5 14 10 7 5 4 65 3 4 8 13 15 10 7 5 64.8

    800 1950 1958 804 1000 320 540 1885 841 x 16 x M10 3 6 10 19 17 12 10 8 133 6 11 20 27 35 28 18 10 132.8

    900 700 708 905 1100 360 590 635 945 x 16 x M10 2 2 4 12 8 6 5 4 74 2 3 7 11 12 9 6 3 73.6

    900 1950 1958 905 1100 360 590 1885 945 x 16 x M10 3 6 9 17 16 10 9 7 150 7 12 17 24 32 25 16 10 149.6

    1000 700 708 1005 1200 400 642 635 1045 x 16 x M10 1 2 4 11 7 5 4 3 82 2 4 6 10 11 8 5 3 82.4

    1000 1950 1958 1005 1200 400 642 1885 1045 x 16 x M10 2 6 9 15 14 9 8 6 165 6 10 17 22 27 20 13 8 165.4

    1120 700 710 1128 1320 448 706 620 1175 x 20 x M10 1 1 3 8 4 3 2 1 92 2 3 5 7 8 6 5 2 92.0

    1120 1950 1960 1128 1320 448 706 1870 1175 x 20 x M10 1 5 8 12 10 7 5 4 184 4 9 14 18 20 17 11 7 184.0

    1250 700 710 1258 1450 500 733 620 1311 x 20 x M10 1 1 2 6 4 3 2 1 103 2 3 4 7 9 6 4 3 103.4

    1250 1950 1960 1258 1450 500 733 1870 1311 x 20 x M10 2 4 5 8 6 4 3 2 205 4 8 12 18 22 17 11 8 205.4

    1400 700 710 1410 1600 500 900 620 1469 x 24 x M10 1 1 2 5 3 3 2 1 116 1 3 3 5 6 4 2 2 115.8

    1400 1950 1960 1410 1600 500 900 1870 1469 x 24 x M10 1 4 5 7 5 3 2 1 230 4 6 9 11 13 8 6 5 230.0

    1600 700 710 1610 1800 500 1000 600 1665 x 24 x M10 1 1 2 4 2 2 1 1 133 1 2 2 4 5 3 2 2 132.6

    1600 1950 1960 1610 1800 500 1000 1850 1665 x 24 x M10 1 4 4 6 4 2 1 1 263 4 4 7 8 9 5 4 4 262.9

    Z94 Silencer without core

    Z 94 - Absorbtion dB Z 95 - Absorbtion dB

    Z95 Silencer with core

    Dimensions in mm

  • Z16 Rubber anti-viberation mounts

    Anti-vibration mounts for compression load. For vibration-free installation of the fan on the horizontal surfaces. Optional spring anti-vibration mounts (on request). Four pieces are included for each fan.

    Z53 Terminal box

    Plastic, black or grey, IP66, temperature range from -20C up to 80C, for indoor and outdoor installation, included cable glands. Delivered: assembled at fan .

    Z55 Terminal box

    Plastic, white, IP54, temperature range from -20C up to 80C, for indoor installation, included cable glands. Delivered: assembled at fan.

    Z56 Terminal box

    Aluminium (up to 30kW), coated steel RAL 3032 (>30kW), IP65, temperature range from -20C up to 80C, for indoor and outdoor installation, included cable glands. Delivered: assembled at fan.

    Z58 Isolator switch

    ON/OFF-switch according to ICE/EN 60947, IP65. Delivered: loose.

    Z83 Mounting foot for silencer

    DN H B e i c LK n d ca. [kg]

    315 230 50 293 250 27 356 x 4 x 9.5 3.5

    355 261 50 317 270 27 395 x 4 x 10 4.6

    400 284 50 351 300 27 438 x 4 x 10 5.4

    450 309 50 395 324 27.5 486 x 4 x 10 8.9

    500 334 50 438 360 27.5 541 x 4 x 10 9.7

    560 400 50 440 380 27.5 605 x 4 x 12 13.6

    630 435 50 526 462 28 674 x 4 x 12 21.3

    710 495 65 688 546 35.5 755 x 4 x 12 24.0

    800 540 65 760 610 36.5 841 x 4 x 12 38.1

    900 590 65 840 660 36.5 945 x 4 x 12 48.1

    1000 642 65 930 730 36.5 1045 x 4 x 12 53.4

    1120 706 80 885 760 45 1175 x 4 x 14 86.5

    1250 733 80 986 786 45 1311 x 4 x 14 98.7

    1400 900 80 1008 768 45 1469 x 4 x 14 134.7

    1600 1000 100 1100 818 55 1665 x 4 x 14 182.1

    Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

    Dimensions in mm

  • www.heinenhopman.com

    Heinen & Hopman encourages a more

    sustainable world. By providing eco-friendly solutions and serviceswe offer our clients

    the option of reducing energy consumption

    and thus co2 emissions. Visit

    greenmanifest.info for more information.

    BrazilT: +5521 3587 4241/4244E: [email protected]

    france - la CiotatT: +334 4204 8685E: [email protected]

    france - GrasseT: +336 3090 7786 E: [email protected]

    GermanyT:+49 4073 1680E: [email protected]

    indiaT: +9133 6499 1293E: [email protected]

    italyT: +3901 8745 7970E: [email protected]

    The netherlands (HQ)T: +313 3299 2500E: [email protected]

    The netherlands (Rotterdam)T: +317 8890 8050E: [email protected]

    norwayT: +47 6919 0900E: [email protected]

    Peoples Republic of ChinaT: +8621 3253 2896E: [email protected]

    Peoples Republic of ChinaT: +86 510 8528 1763E: [email protected]

    PolandT: +489 1433 1800E: [email protected]

    RomaniaT: +402 3644 8222E: [email protected]

    RussiaT: +7 (4012) 308 801E: [email protected]

    singaporeT: +65 6897 7879E: [email protected]

    south KoreaT: +8270 4901 0000E: [email protected]

    spainT: +349 3225 9668E: [email protected]

    swedenT: +46 3121 7500E: [email protected]

    TurkeyT: +9021 6493 8118E: [email protected]

    UAE (Abu dhabi) T:+971 2550 4147E: [email protected]

    UAE (dubai)T: +971 4263 5453E: [email protected]

    UsA - fort lauderdale, floridaT: +195 4463 0110E: [email protected]

    UsA - Houma, louisiana T: +198 5876 7989E: [email protected]

Click here to load reader

Reader Image
Embed Size (px)
Recommended