Date post: | 06-Apr-2018 |
Category: |
Documents |
Upload: | pierre799es |
View: | 220 times |
Download: | 0 times |
of 24
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
1/24 8Order online www.axminster.co.uk/industrial
Industrial Panel Saws
Axminster Industrial SeriesP30/2200 Panel SawsNot every trade workshop needs a large panel saw dominating
the workspace, but a compact, fully featured saw is a tempting
alternative. The Axminster Industrial Series P30/2200 does just
that, having a robustly constructed chassis in heavy gauge steel
and generous grey cast iron table. This is a sturdy chassis that
gives stability and vibration free running. The 305mm main blade
gives a maximum depth of cut of 90mm. The saw blade is carried
on a heavy duty spindle ensuring accurate blade control and is
driven by a multi V t ype belt which ensures quiet operation with
high reliability. A 120mm scoring blade is standard, easily
adjusted or withdrawn below the table by simple hand controls.
There are two options available; 230V 1ph or 415V 3ph, both are2.2kW. These high efficiency motors will give more than ample
power for the toughest of tasks, they are cool running and have a
brake for safe stopping. A 2,200mm sliding table is a standard
fitting, very smooth running, carries a sizeable crosscut table and
includes a telescopic mitre fence complete with length stops. The
crosscut table is easily removed if required, saving space when
not needed. Rear outfeed and right hand support tables are
included, giving a sizeable working area for sheet work. The cast
iron handwheel controls are smooth to operate and have
retracting handles to save them being knocked. Efficient dust
control is via a direct dust chute and ensures clean operating
when connected to a suitable extraction system. This saw has all
you could require in a small but busy workshop, or in a school
preparation area. The main saw blade is not supplied, please make
your selection from the blades listed or from our Blades Section.
(N.B. The Overhead Crown Guard Kit is to be recommended for
increased safety and more efficient dust collection).
Available as 2.2kW 230V 1ph or 415V 3ph
Powerful, heavyweight but compact dimensions
Extra large rigid cast i ron table
2,200 x 360mm fully featured sliding table
Crosscut frame fully supported by a heavy duty telescopic arm
Rear outfeed and right hand support tables
Rigid, cast iron rip fence bracket
Uses 305mm saw blades, wide range available
120mm scoring blade, fully adjustable for depth and position
Model Axminster Ind P30/2200
Rating Industrial
Power 2.2kW (230V 1ph or 415V 3ph)Blade Dia/Bore 305mm/30mm
Blade Tilt 0-45Max Depth of Cut @ 45 64mm
Max Depth of Cut @ 90 90mm
Table Size 896 x 548mm
Table Height 915mm
Sliding Table Size 2,200 x 360mm
Dust Extraction Outlet 120mm & 60mm
Overall L x W x H 2,326 x1,350 x 1,100mmWeight 480kg
P30/2200 230V 1ph 3,559.50 2,966.25 953440
P30/2200 415V 3ph 3,459.50 2,882.92 953441
Saw Blade 305 x 3.2 x 30mm x 48T 84.95 70.79 951525
Saw Blade 305 x 3.2 x 30mm x 72T 118.96 99.13 951526
Saw Blade 305 x 3.2 x 30mm x 96T 110.50 92.08 951527
Inc.vat Ex.va t Co de
Overhead Crown Guard KitThis Overhead Crown Guard is an accessory to fit the Axminste
P30/2200 model. It offers much improved protection for the u
as well as much superior dust collection and ease of use of the
saw. The HSE recommend the use of guards of this design due
the greater safety for the user, it is simple to fit and is a great
enhancement.
Overhead Crown Guard kit 474.50 395.42 211
Inc.vat Ex. vat C
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
2/24
This is a great range of mid sized panel saws designed for ease of use and the high accuracy cutting of board materials of all types. With a
choice of 2,500mm or 3,200mm x 360mm sliding tables which are robust and smooth running, these giving a 2,400mm or 3,100mm
capacity before the blade.
A crosscut frame supports the larger boards and a mitre fence with a telescopic extension and two flip-over length stops is fitted.
Unusually, offering a choice of main blade size between 305-355mm giving a maximum depth of cut at 115mm at 90. A 120mm scoring
blade powered by a separate motor is standard, giving the finest of cuts on faced materials. The main table is a rigid, precision ground,
cast iron surface of 548 x 896mm supported by a welded steel chassis, powder coated for long term protection.
A cast iron rip fence body with fine width adjustment is complemented by a long, alloy extrusion fence arm, all running
on a solid 40mm chromed steel rail. Rear out feed and side extension tables are standard, along with a work clamp,
handle and edge shoe for the sliding table. We do recommend the use of the optional Overhead Crown Guard when
using the larger 355mm blades. Please choose your main saw blade from the selection below. A fine range of modern
saws, a pleasure to use in any workshop.
Overhead Crown Guard Kit
This Overhead Crown Guard is an accessory to fit the Axminster
SS-1600MH, P305/2500 and P305/3200 models. It offers much
improved protection for the user as well as superior dust
collection. The HSE recommend the use of guards of this design
due to the greater safety for the user and we would recommend
the use of these guards when using blades greater than 305mm
in diameter.
Improved user protection
Superior dust collection
Better visibility during cutting
Overhead Crown Guard kit 474.50 395.42 21156
Inc.vat Ex. va t Co d
86 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Panel Saws
Axminster Industrial Series P305/2500 & P305/3200 Panel Saw
Precision ground cast iron main table
2,500 x 360mm or 3,200 x 360mm sliding tables with large panel support table
Takes 305-355 main saw blades
Separately powered 120mm scoring blade
Outfeed and side extension tables standard
Cast iron rip fence with fine adjustment
P305/2500 230V 1ph 4,369.50 3,641.25 953442
P305/2500 415V 3ph 4,249.50 3,541.25 211564
P305/3200 230V 1ph 4,759.50 3,966.25 953443
P305/3200 415V 3ph 4,629.50 3,857.92 211566
Saw Blade 305 x 3.2 x 30mm x 48T 84.95 70.79 951525
Saw Blade 305 x 3.2 x 30mm x 72T 118.96 99.13 951526
Saw Blade 305 x 3.2 x 30mm x 96T 110.50 92.08 951527
Saw Blade 355 x 3.5 x 30mm 54T 105.50 87.92 951529
Saw Blade 355 x 3.5 x 30mm 72T 135.50 112.92 951530
Saw Blade 355 x 3.5 x 30mm 108T 139.00 115.83 951531
Model P305/3200
Rating Industrial
Power 3.75kW (230V 1ph, 415V 3ph)
Blade Dia/Bore 305-355mm, 30mm
Blade Tilt 0-45 degrees
Max Depth of Cut @ 45 62mm (70mm max)
Max Depth of Cut @ 90 90mm (115mm max)
Max Width of Cut with Fence 1,300mm
Max Ripping Width 1,300mmTable Size 548 x 896mm
Table Height 915mm
Sliding Table Size 3200 x 360mm
Dust Extraction Outlet 120mm & 60mm
Weight 600kg
Model P305/2500
Rating Industrial
Power 3.75kW (230V 1ph, 415V 3ph)
Blade Dia/Bore 305-355mm, 30mm
Blade Tilt 0-45 degrees
Max Depth of Cut @ 45 62mm (70mm max)Max Depth of Cut @ 90 90mm (115mm max)
Max Width of Cut with Fence 1,300mm
Max Ripping Width 1,300mm
Table Size 548 x 896mm
Table Height 915mm
Sliding Table Size 2500 x 360mm
Dust Extraction Outlet 120mm & 60mm
Weight 573kg
Inc.vat Ex. va t C ode
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
3/24 8Order online www.axminster.co.uk/industrial
Industrial Panel Saws
Axminster Industrial Series D405A/3200 Panel SawThis is a new design of large panel saw featuring a 3,200mm long sliding table of 395mm width with a four track bearing
system for extra stability and smooth running. This sliding table is e asily and completely adjustable to make sure it runs true to
the blade, so complete accuracy is guaranteed. Able to crosscut up to 3,100mm and rip cut up to 1,300mm against the fence this saw
has prodigious capacities for all your board work. Powered by a 5.5kW 415V motor for the main blade and a separate 0.75kW motor for
the scoring blade this machine is very well powered as standard.
The blade rise and fall is motorised, as is the blade tilt. A digital read-out enables accurate blade height and tilt setting every time. A very
generously sized cast iron main table with its outfeed and side support tables gives a large working area, unimpeded by the overhead
saw blade guard system. The exceptionally rigid cast iron rip fence holder features a micro adjustment system and a rigid alloy extrusion
rail, all mounted on a solid chromed bar and held by cam locks. An optional fence fitted with a Digital Read-Out (DRO) can be fitted for
improved accuracy of setting between the rip fence and blade.
Powered blade height and tilt with digital read-out
Precision ground main table
Smooth running 3,200 x 395mm sliding table
Takes 355-400mm main saw blades (not supplied)
Separately powered 120mm scoring blade
Large panel support frame
Outfeed and side extension tables standard
Cast iron rip fence with fine adjustment
Work clamp, edge shoe and mitre gauge standard
Model D405ARating Industrial
Power 5.5kW (415V 3ph)
Blade Dia/Bore 355-400mm, 30mm
Blade Tilt 0-45
Max Depth of Cut @ 45 70 - 84mm max
Max Depth of Cut @ 90 105-127mm maxTable Size 548 x 896mm
Table Height 915mm
Sliding Table Size 3,200 x 395mm
Dust Extraction Outlet 120mm & 60mm
Weight 859kg
D405A 415V 3ph 7,259.50 6,049.58 953444
Saw Blade 355 x 3.5 x 30mm 54T 105.50 87.92 951529
Saw Blade 355 x 3.5 x 30mm 72T 135.50 112.92 951530
Saw Blade 355 x 3.5 x 30mm 108T 139.00 115.83 951531
Saw Blade 400 x 3.8 x 30mm 36T 95.99 79.99 951532
Saw Blade 400 x 3.8 x 30mm 60T 127.50 106.25 951533
Saw Blade 400 x 3.8 x 30mm 84T 169.50 141.25 951534
Saw Blade 400 x 3.8 x 30mm 120T 171.00 142.50 951535
Inc.vat Ex. vat C ode
Crosscut table
Work hold down clamp
Edge shoe
As you would expect, the chassis is of heavy welded steel construction and powder coated for long term
protection. A panel saw is the machine at the heart of any professional workshop and this saw would win its placein all but the largest workshop. Supplied complete with 3,200 x 395mm sliding table, scoring blade, overhead
crown guard, crosscut fence, mitre fence and work hold down clamp. Not supplied with a main blade, please
choose from our Axcaliber Premium Blades selection.
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
4/2488 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Vertical Panel Saws
Safety Speed Cut C4 Panel SawThe C4 vertical panel saw is a useful addition to any small or medium workshop where sheet material is regularly processed. Vertical
operation makes handling of the sheets much easier as well as saving valuable floor space. The saw can be secured permanently to a wa
or moved around with the aid of the optional wheels and either the fixed or the folding stand. It can also be transported in the back of a
van for site use. The saw unit with its 44.5mm depth of cut and 1,600W motor is fixed to a mounting plate which slides up and down the
two guide bars, supported by a spring recoil device. Vertical cuts are made by positioning the sheet in the correct position on the frame
and moving the saw blade down through the sheet; horizontal cuts are made by rotating the saw unit through 90, locking it in the
correct vertical position and moving the sheet through the blade. Rollers on the lower rail ease the passage of the sheet through the saw
and there are wheeled extensions available for the bottom rail to allow 2,440 x 1,220mm(8 x 4) sheets to be safely processed.
1,600W industrial duty motor Up to 44.5mm depth of cut
Counter-balanced saw carriage for ease of cutting
2,450 x 1,270mm(8 x 4)sheet cutting capacity
Optional wheels and fixed or folding stands available
Rollers on lower guide rails to ease horizontal cutting
Optional wide board extensions and thin material pressure rollers
C4 package supplied with midway fence for handling narrow
boards, dust extraction kit, fixed stand and wheel kit
Picture shows the mid-way
fence with support boards
fitted, these can be
removed very quickly if
required. Note the stop
and scale that allows for
quick and precise setting
to be made.
Model C4
Rating Industria
Power 1,600W
Blade Dia/Bore 205mm/5/8
Max Depth of Cut 44.5mm
Max Crosscut 1,270mm
Max Ripping Width 2,450mm
Overall L x W x H 1,525 x 915 x 1,900mm
Weight 67kg
C4 Panel Saw 240V 1,649.50 1,374.58 11006
C4 Saw Package 240V 1,859.50 1,549.58 34013
205 x 1.8 x 16mm 64T Wood 19.45 16.21 95068
205 x 2 x 16mm 64T Non Ferrous Metal 22.85 19.04 95068
Inc.vat Ex. va t Co d
Safety Speed Cut H4 & H5 Panel SawsThe H4 and H5 verti cal panel saws are a useful addition to any small or medium workshop where sheet material is
regularly processed. Vertical operation makes handling of the sheets much easier as well as saving valuable floor
space. The saw can be secured permanently to a wall or moved around with the aid of the optional wheels and
either the fixed or the folding stand. It can also be transported in the back of a van for s ite use. The saw unit with its
44.5mm depth of cut and 1,600W motor is fixed to a mounting plate which slides up and down the two guide
bars, supported by a spring recoil device. Vertical cuts are made by positioning the sheet in the correct position
on the frame and moving the saw blade down through the sheet; horizontal cuts are made by rotating the saw
unit through 90, locking it in the correct vertical position and moving the sheet through the blade. Rollers on
the lower rail ease the passage of the sheet through the saw and there are
wheeled extensions available for the bottom rail to allow 2,440 x 1,270mm
(8 x 4) sheets to be safely processed.
The saw comes fitted with a mid-way fence which makes the handling of
narrower width boards much more convenient. The two horizontal timber
supports on the mid-way fence are secured in place with quick release cam
clamps which allow the supports to be removed in a few seconds when full
depth sheets are to be cut. The mid-way fence is fitted with a precision stop
for accurate repeat length cutting.
Other accessories available are: (a) a sliding dust extraction kit with a
6.5 metre hose which slides over the rollers at the top of the machine as the
saw moves up and down, (b) a multiposition length stop which allows for up
to eight pre-set lengths to be set and (c) a hold down bar with support
fingers and non marring rollers for use when cutting thin materials such as
Perspex.
Please note that a fine toothed blade is now supplied as standard with
the saw. An additional blade suitable for cutting non-ferrous materials is
also available.
1,600W, 13A industrial duty motor
Zinc plated 44.5mm steel guide tubes
Four Nylatron roller bearing systems
Adjustable vertical and horizontal rulers
Thin material pressure guard as optional accessory
Spring loaded counter balance system
Injection-moulded plastic material rollers
Quick change from vertical to horizontal cutting
Model H4
Rating Industrial
Power 1,600W
Blade Dia/Bore 205mm/5/8
Max Depth of Cut 44.5mm
Max Crosscut 1,270mm
Max Ripping Width Unlimited
Overall L x W x H 3,050 x 915 x 1,905mm
Weight 111kg
H4 Ve rti ca l Pa nel S aw 2 40V 2 ,1 99. 50 1,832.92 500461
Inc.vat Ex.va t Co de
Model H5
Rating Industrial
Power 1,600W
Blade Dia/Bore 205mm/5/8
Max Depth of Cut 44.5mm
Max Crosscut 1,625mm
Max Ripping Width Unlimited
Overall L x W x H 3,050 x 915 x 2,286mm
Weight 135kg
H 5 Ver ti cal Pan el S aw 24 0V 2, 51 9. 50 2,099.58 500464
Inc.vat Ex. va t C ode
The saw comes fitted with a mid-way fence which makes the
handling of narrower width boards much more convenient. Thetwo horizontal timber supports on the mid-way fence are secured
in place with quick release cam clamps which allow the supports
to be removed in a few seconds when full depth sheets are to be
cut. The mid-way fence is fi tted with a precision stop for accurate
repeat length cutting.
Other accessories available are: (a) a sliding dust extraction kit
with a 6.5m hose which slides over the rollers at the top of the
machine as the saw moves up and down, (b) a multiposition
length stop which allows for up to eight pre-set lengths to be set
and (c) a hold down bar with support fingers and non marring
rollers for use when cutting thin materials such as Perspex.
A package consisting of the basic saw with the mid-way fence
together with the fixed stand, wheel set and sliding dust kit is
available at a small cost saving over the individual items. Please
note that a fine toothed blade is now supplied as standard with
the saw. An additional blade suitable for cutting non-ferrous
materials is also available.
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
5/24
Extension Set
for C4, H4 & H5 Panel SawsExtensions come as a pair and adds 20 to each side of the mate
handling roller fence allowing for easy processing of larger pane
They enable full sized panel saws to easily cut panels larger than
in length, quickly, accurately and safely, with just a single operato
Can be fitted to the C4, H4 and H5 panel saws.
Extension Set 142.00 118.33 500
Inc.vat E x. vat C
8Order online www.axminster.co.uk/industrial
Vertical Panel Saws Accessories
Folding Stand for C4 Panel SawThe Folding Stand allows the panel saw to free stand anywhere in
your workshop. It will fold back out of the way, allowing for easier
transporting or storage of the panel saw.
Folding Stand (C4 Only) 128.50 107.08 030011
Inc.vat E x.va t Co de
Quick Stops for C4,H4 & H5 Panel SawsThe quick stop aids with easily adjustable repeat cutting.
Using an 8 long heavy extrusion with an embedded scale and
an adjustable machined aluminum stop block.
Quick Stop for C4 172.96 144.13 341174
Quick Stop for H4 & H5 207.50 172.92 500466
Inc.vat E x.va t Co de
Midway Fencesfor C4, H4 & H5 Panel SawsBrings your small panel work to waist height. Reduce back fatigue
while cutting quantities of small panels on your machine. Uses
removable fence supports on both the left and right of the
machine centre. Included is a stop block riding over recessed
gauges for setting stops for repeat cuts.
Midway Fence for C4 352.50 293.75 110069
Midway Fence for H4 & H5 403.50336.25 500467
Inc.vat E x.va t Co de
Hold Down Barfor C4, H4 & H5 Panel SawsThe Hold Down Bar keeps thin and flexible materials firmly
against the panel saws frame for accurate, easy and safe cuttin
The Hold Down Bar features spring steel fingers with non-mar
rollers to reduce vibration and flex while cutting thin materials
Hold Down Bar for C4 & H4 157.00 130.83 500
Hold Down Bar for H5 166.00 138.33 500
Inc.vat E x. vat C
Fixed Stand forC4, H4 & H5 Panel Saws
Fixed Stand 95.95 79.96 110074
Inc.vat E x. vat C ode
The Fixed Stand allows the panel saw to free stand anywhere in
your workshop. The tripod design minimizes the effects of the
most uneven floor while holding your panel saw at the best angle
for stable material handling and cutting. Can be fitted to the C4,
H4 and H5 panel saws.
Allows you to efficiently remove most
airborne dust particles and maintain a
safer, cleaner working environment.
Requires the connection of a suitable
dust extractor. Kits contains, hose,
rollers, dust tube and elbow. Can be
fitted to the C4, H4 and H5 panel saws.
Dust kit 170.99 142.49 110070
Inc.vat E x. vat C ode
Wheel Set for
C4, H4 & H5 Panel SawsAllows the panel saw to be moved easily when in the completelyupright position. When the panel saw is resting on the stand,
wheels are disengaged and the machine will not move. Can be
fitted to the C4, H4 and H5 panel saws.
Wheel Set 43.25 36.04 110072
Inc.vat E x. vat C ode
Sliding Dust kit forC4, H4 & H5 Panel Saws
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
6/2490 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Rip Saws
Sliding table folds
away when not in use
Smooth & precise hand wheels with locking facility
Axminster Industrial Series TSCE-12R 305mm Table SawThis is a small industrial quality circular saw, primarily designed for rip work, compact in size but of very robust construction. Based
around an all welded steel base with a heavy, finely ground, all cast iron table and amply powered by a mechanically braked induction
motor. A small sliding table of cast iron running on an adjustable bearing system, complete with a simple mitre fence and a sliding
support arm is a standard fitting, ideal for small boards or panels. This easily folds down out of the way if not required, saving space in the
workshop. An extremely rigid rip fence with cam action clamps, comprising a cast iron housing with an extruded alloy fence rail giving a
max capacity of 620mm to the blade is also standard.
The power/saw head is mounted in a ver y rigid cast iron frame, the adjustments for rise and fall and blade tilt are via large, chromed steel
hand wheels which are exceptionally smooth in operation. The handwheels also have in-built locking facilities. Dust extraction is via arear mounted 100mm port and a connection hose to the crown guard. A conveniently mounted switch box has a locking emergency
stop button and features overload protection and individual phase fused protection.
This saw is simply per fect for the small general woodworking workshop, school technicians or maintenance departments requiring a
simple, robust dimension saw. N.B.16A supply required.
Cast iron main table and folding sliding table
Mechanically braked induction motor, choice of 1 or 3ph
Rigid rip fence with cam action clamps
Blade controls are smooth and precise, with position locks
Main switchgear has overload and fused protection
Emergency Stop button with lock function
Model TSCE-12
Rating Industria
Power 2.2kW (230V) - 3.75kW (415V
Blade Dia/Bore 305mm/30mm
Blade Tilt 0 - 45
Max Depth of Cut @ 45 72mm
Max Depth of Cut @ 90 102mm
Max Width of Cut with Fence 620mmTable Size 866 x 800mm
Table Height 860mm
Sliding Table Size 354 x 650mm
Dust Extraction Outlet 100mm + 60mm
Overall L x W x H 650 x 850 x 900mm
Weight 287k
TSCE-12R 305mm Table Saw 230V 2,149.50 1,791.25 70015
TSCE-12R 305mm Table Saw 415V 2,179.50 1,816.25 60080
Saw Blade 305 x 3.2 x 30mm x 28T 63.00 52.50 95152
Saw Blade 305 x 3.2 x 30mm x 48T 84.95 70.79 95152
Saw Blade 305 x 3.2 x 30mm x 72T 118.96 99.13 95152
Saw Blade 305 x 3.2 x 30mm x 96T 110.50 92.08 95152
Inc.vat Ex. va t Co d
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
7/24 9Order online www.axminster.co.uk/industrial
Industrial Rip Saws
Axminster Industrial Series TSCE-400R-1 400mm Table SawThis saw is a larger version of our TSCE-12R table saw, having the same basic design but remaining quite compact in size and extremely
robust. Available as a basic rip saw model, this machine is constructed around a heavy gauge welded steel chassis with a heavily braced
cast iron table of very generous proportions. The 5.6kW 415V 3ph motor drives the 400mm blade giving ample power even at the
maximum 130mm depth of cut. There is a 680mm width of cut from blade to fence, the rip fence being a heavy cast iron base running on
a solid steel bar with fine width adjustment and a deep section alloy extrusion slid ing fence rail. Fitted with cam lock clamps, this fence
will remain in place even under arduous cutting conditions. A heavy duty cast iron mitre fence running in a T slot is provided.
There is a full overhead crown guard provided for full blade protection, complete with excellent provision for dust extraction. The saw
motor/arbor frame is a massive casting providing rigidity and vibration damping qualities, all adjustments to the blade height and tilt
being made by the extra large cast iron hand wheels. The hand wheels also have built in locking facilities to prevent movement of the
blade from the settings made, and are exceptionally smooth in operation. A conveniently situated switch box has a locking emergency
stop button, features overload protection and individual phase fuses. A separate foot operated emergency stop switch is conveniently
situated to provide extra operator safety. Supplied with a 400mm diameter, 28T rip blade. An ideal saw for producing large frames for
roofing, joists, gate posts or processing other heavy timbers. There are two extra options that can be added to the basic saw:
1. A large right hand extension table, complete with a longer rip fence rail and extension to the overheard crown guard. This will give up
to 1175mm width of cut from blade to fence. There is also a lower storage platform for materials etc.
2. A simple sliding table kit, comprising an alloy extrusion sliding table, and a cross cut table with a telescopic support leg. This is easy to
fit, fully adjustable and will give 1360mm before the blade. It also has a mitre fence rail with a flip over l ength stop.
Substantial cast iron table, ground for accuracy
Mechanically braked high efficiency induction motor
Rigid rip fence with cam action clamps
Blade rise and fall plus tilt via smooth acting hand wheels
Full overload protection and emergency stop switch provisio
Additional options available
Right hand
extension table
Sliding table
and crosscut
table kit
Rating Indust
Power 5.6
Max Depth of Cut @ 45 93m
Max Depth of Cut @ 90 130m
Max Ripping Width 680mTable Size 1,125 x 900mTable Height 850m
Dust Extraction Outlet Cabinet - 150mm , Crown guard - 100m
Weight 430
T SC E-400R-1 Table Saw 415V 3,689.50 3,074.58 210
R ight Hand Extension Table 547.00 455.83 210
1500mm Sliding Table 410.50 342.08 210
Cross Cut Table 364.50 303.75 210
Sliding Table & Crosscut Table Kit 736.00 613.33 718
Saw Blade 400 x 3.8 x 30mm 36T 95.99 79.99 951
Saw Blade 400 x 3.8 x 30mm 60T 127.50 106.25 951
Saw Blade 400 x 3.8 x 30mm 84T 169.50 141.25 951
Saw Blade 400 x 3.8 x 30mm 120T 171.00 142.50 951
Inc.vat Ex. vat C
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
8/24
Fine grain Tungsten Carbide Tippedblades for the professional user
featuring resin filled laser cut slots
that dampen vibration.
The Premium range is from 254mm to 400mm and is aim ed very much at
the professional and industrial user. Basically manufactured in the same
way, each plate is ground to an exceptional standard of accuracy, having
a blade run-out of no more than 0.10mm on the very largest size. The TCT
tips are made from Luxembourg Carbide, known for its consistent quality,
CNC sandwich brazed to the plate and ground to a fine edge. Course toothed
blades are alternate top bevel ground (ATB) whilst the finer toothed blades are
top centre ground (TCG), ensuring the best performance for each application. The
plate of the blade also has resin filled anti vibration slots. These greatly reduce the noise
generated whilst cutting which must be a bonus for the saw operator and those nearby. These
blades are recognised by the HSE as an invaluable method of reducing workshop noise. The Premium
blades will give an exceptional cutting performance combined with a very reasonable price for such high
technology blades.
These flat adjustable scoring blades will
allow you to make different thickness cuts
by increasing or decreasing number of
spacer shims. The scoring saw is a standard fitting on several of the larger saw
benches in our range, particularly those designed for cutting sheet material. The
blade is fitted a short distance in front of the main b lade and cuts a shallow groove
on the underside of the board, preventing splintering on faced and veneered
boards. The scoring blades listed here are of the adjustable type a nd come in two
parts with a set of shims so that
the cut can be aligned exactly with
that of the main blade. The 80mm
diameter has a 20mm bore
together with 951805 and
951804. 951583 and 951584 are
22mm bore.
92 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
General Purpose Saw Blade
254mm Dia
30mm Bore
40 Teeth
3.2mm Kerf ATB
52.99 44.16 951521
Inc.vat Ex.vat Code
Fine Saw Blade
254mm Dia
30mm Bore
60 Teeth
3.2mm Kerf TCG
72.50 60.42 951522
Inc.vat Ex.vat Code
Extra Fine Saw Blade
254mm Dia
30mm Bore
80 Teeth
3.2mm Kerf TCG
88.50 73.75 951523
Inc.vat Ex.vat Code
305mm 315mm
355mm 400mm
254mm
260mm
Rip Saw Blade
254mm Dia
30mm Bore
24 Teeth
3.2mm Kerf ATB
40.96 34.13 951520
Inc.vat Ex.vat Code
Rip Saw Blade
305mm Dia
30mm Bore
28 Teeth
3.2mm Kerf ATB
63.00 52.50 951524
Inc.vat Ex.vat Code
General Purpose Saw Blade
305mm Dia
30mm Bore
48 Teeth
3.2mm KerfATB
84.95 70.79 951525
Inc.vat Ex.vat Code
Fine Saw Blade
305mm Dia
30mm Bore
72 Teeth
3.2mm Kerf TCG
118.96 99.13 951526
Inc.vat Ex.vat Code
Extra Fine Saw Blade
305mm Dia
30mm Bore
96 Teeth
3.2mm Kerf TCG
110.50 92.08 951527
Inc.vat Ex.vat Code
Rip Saw Blade
355mm Dia
30mm Bore
28 Teeth
3.5mm Kerf ATB
73.96 61.63 951528
Inc.vat Ex.vat Code
General Purpose Saw Blade355mm Dia
30mm Bore
54 Teeth
3.5mm Kerf ATB
105.50 87.92 951529
Inc.vat Ex.vat Code
Fine Saw Blade
355mm Dia
30mm Bore
72 Teeth
3.5mm Kerf TCG
135.50 112.92 951530
Inc.vat Ex.vat Code
Extra Fine Saw Blade
355mm Dia
30mm Bore
108 Teeth
3.5mm Kerf TCG
139.00 115.83 951531
Inc.vat Ex.vat Code
Rip Saw Blade
400mm Dia
30mm Bore
36 Teeth
3.8mm Kerf AT
95.99 79.99 95153
Inc.vat Ex.vat Cod
General Purpose Saw Blade400mm Dia
30mm Bore
60 Teeth
3.8mm Kerf AT
127.50 106.25 95153
Inc.vat Ex.vat Cod
Fine Saw Blade
400mm Dia
30mm Bore
84 Teeth
3.8mm Kerf TCG
169.50 141.25 95153
Inc.vat Ex.vat Cod
Extra Fine Saw Blade
400mm Dia
30mm Bore
120 Teeth
3.8mm Kerf TCG
171.00 142.50 95153
Inc.vat Ex.vat Cod
Rip Saw Blade
315mm Dia
30mm Bore
28 Teeth
3.2mm Kerf ATB
66.95 55.79 501023
Inc.vat Ex.vat Code
General Purpose Saw Blade
315mm Dia
30mm Bore
48 Teeth
3.2mm Kerf ATB
90.50 75.42 501024
Inc.vat Ex.vat Code
Cross Cut Saw Blade
315mm Dia
30mm Bore
72 Teeth
3.2mm Kerf TCG
126.50 105.42 501025
Inc.vat Ex.vat Code
Extra Fine Saw Blade
315mm Dia
30mm Bore
96 Teeth
3.2mm Kerf TCG
117.00 97.50 501026
Inc.vat Ex.vat Code
Negative Rake Saw Blade
260mm Dia
30mm Bore
60 Teeth
2.5mm Kerf ATB
72.50 60.42 501027
Inc.vat Ex.vat Code
Negative Rake Saw Blade
260mm Dia
30mm Bore
80 Teeth
2.5mm Kerf AT
89.50 74.58 50102
Inc.vat Ex.vat Cod
Axcaliber SplitScoring Blades
80 x (2.8-3.6mm) 49.55 41.29 95158
100 x (2.8-3.6mm) 51.95 43.29 95158
120 x (2.8-3.6mm) 53.95 44.96 95158
100 x (2.8-3.6mm) 51.95 43.29 95180
120 x (2.8-3.6mm) 53.95 44.96 95180
Inc.vat E x. vat Co d
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
9/24
Table tilt quadrant
AP5300T
Industr1,500W (230
575 & 1,200m/m
3,860mm(15
6mm(1/4)/25mm(
510m
310m
530 x 530m
10 - 0 - 4
950m
2 x 100m
1,020 x 790 x 2,040m
163
9Order online www.axminster.co.uk/industrial
Industrial Bandsaws
Cast iron wheels
Large cast table
Axminster Industrial Series AP3501B3 BandsawThe AP3501B3, with its high quality, specification and modest price, is an upgraded machine for the
small trade workshop. The combination of rigidly built steel body, finely ground cast iron table, deepsection rip fence and fully adjustable ball bearing blade guides produce the level of performance
demanded by both the trade and advanced skills amateur user. The rip fence runs on a calibrated
aluminium extrusion and is locked firmly i n place with a camlock lever, giving a firm and accurate
location. The adjustable precision mitre fence is T-slotted into the table for added safety and accuracy.
At the rear of the machine are the blade tracking control, the blade tension indicator and a quick
action blade tension lever, useful for both blade changing and for releasing the tension on the blade
when the machine is not in use. Safety features include a electro-magnetic motor brake, interlocked
and micro switched doors and a key release emergency stop switch. Supplied complete with floor
stand, rip fence and blade. This upgraded bandsaw is fully compliant with both the requirements of
BS 4163:2008 (for educational establishments) and PUWR98 (workplace) regulations. This machine
will also appeal to those requiring the very highest standards of performance and safety in their
workplace. Please contact our Specialist Sales Department (0845 0707870) for further details.
Model AP3501B3
Rating Industrial
Power 750W
Blade Speed 800m/min
Blade Length 2,552mm(100.1/2)
Blade Width Min/Max 3mm(1/8)/19mm(3/4)
Max Width of Cut 340mm
Max Depth of Cut 200mm
Table Size 495 x 360mm
Table Height on Stand 1,060mm
Table Tilt 10 - 0 - 45
Table Height 490mm
Dust Extraction Outlet 100mm
Overall L x W x H 445 x 610 x 1,753mm
Weight 85kg
AP3501B3 Bandsaw 230V 1,049.50 874.58 700356
Pack of 5 Blades 2,552mm 62.00 51.67 719580
2,552mm x 19mm x 4-6Tpi 41.30 34.42 211501
2,552mm x 13mm x 6-10Tpi 38.90 32.42 212025
2,552mm x 13mm x 10-14Tpi 38.90 32.42 212034
Inc.vat Ex. va t Code
These floor standing Axminster Industrial Series bandsaws are designed for continuous use in the
busy workshop or manufacturing situation. Powerful, smooth running induction motors, large cut
capacities, steel and cast iron construction and manufactured to the exacting standards expected
from our Plus range of machines. They offer excellent safety features including electro-mechanica
braked motors, key release emergency stop switch and safety interlocked doors. Features include
iron table, cast iron wheels, two blade speeds, heavy duty blade bearing guides throughout, mitre
fence and an exceptionally rigid rip fence with an easy to read magnifying scale. Fitted with two x
100mm dust outlets for excellent dust control when fitted to a suitable extractor. These upgraded
bandsaws are fully compliant with both the requirements of BS 4163:2008 (for educational
establishments) and PUWR98 (workplace) regulations. Please contact our Specialist Sales Departm
(0845 0707870) for further details. N.B 16A supply is required.
Model AP4300T/1
Rating IndustrialPower 1,500W (230V)
Blade Speed 430 & 850m/min
Blade Length 3,327mm(131)
Blade Width Min/Max 3mm(1/8)/25mm(1)
Max Width of Cut 410mm
Max Depth of Cut 300mm
Table Size 600 x 430mm
Table Tilt 10 - 0 - 45
Table Height 950mm
Dust Extraction Outlet 2 x 100mm
Overall L x W x H 820 x 670 x 1,880mm
Weight 145kg
AP4300T/ 1 Bandsaw 230V 1,289.50 1,074.58 700
AP5300T/ 1 Bandsaw 230V 1,409.50 1,174.58 700
3,327mm x 13mm x 6-10Tpi 49.00 40.83 951
3,327mm x 13mm x 10-14Tpi 57.00 47.50 951
Inc.vat Ex. vat C
AxminsterIndustrial Series AP4300T/1 & AP5300T/1 Bandsaws
Blade quick release lever
Lower blade guide
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
10/24
AP6300HD3
Industrial
3.7kW (415V)
1,615m/min
4,600mm(181)9.5mm(3/8)/38mm(1.1/2)
620mm
405mm
600 x 850mm
0 - 45
830mm
2 x 100mm
1,190 x 750 x 2,060mm
380kg
94 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Bandsaws
These heavy duty Axminster Industrial Series bandsaws are designed for continuous use in
manufacturing or production facilities. Powered by electro-magnetically braked motors that offer
ample power at full depth of cut in all timbers. The heavily fabricated chassis is in welded steel withperfectly balanced solid cast iron wheels to give exceptionally smooth running. It has a very large cast
iron ground surfaced table with a user friendly table tilt rack and pinion mechanism, table lock lever,
mitre fence and a deep section cast iron rip fence with solid chromed steel rail. Other features include
safety interlocked doors, heavy duty blade guide bearings throughout, twin belt drive with si mple to
adjust belt tightening, and a quick release blade tensioning lever to simplify and speed up the blade
changing process. Dust extraction is well catered for with two x 100mm outlets, offering almost dust
free cutting when connected to a suitable extractor. Offering up to a full 620mm(24) cutting width
and a 405mm(16) cutting depth, the AP6300HD is the machine to have for processing those large
workpieces that defeat lesser bandsaws! These models are fully compliant with PUWR98 (workplace)
regulations and will appeal to those seeki ng the highest standards of safety and performance. The
AP5300-TH3 also complies with BS4163-2007 making this machine suitable for educational use. For
further details contact our Specialist Sales Dept (0845 0707870).N.B. 3ph only.
Model AP5300HD3
Rating Industrial
Power 2.2kW (415V)
Blade Speed 1,370m/min
Blade Length 4,190mm(165)Blade Width Min/Max 6.3mm(1/4)/35mm(1.3/8)
Max Width of Cut 510mm
Max Depth of Cut 350mm
Table Size 530 x 750mm
Table Tilt 0 - 45
Table Height 900mm
Dust Extraction Outlet 2 x 100mm
Overall L x W x H 1,002 x 727 x 1,982mm
Weight 264kg
AP 530 0HD 3 B an ds aw 4 15 V 1, 97 9. 50 1,649.58 700354
AP 630 0HD 3 B an ds aw 4 15 V 2, 65 9. 50 2,216.25 700352
4,190mm x 19mm x 4-6Tpi 66.50 55.42 951670
4,190mm x 13mm x 6-10Tpi 60.95 50.79 951669
4,597mm x 13mm x 6-10Tpi 66.00 55.00 951671
4,597mm x 19mm x 4-6Tpi 72.50 60.42 951672
Inc.vat Ex. vat Co de
Axminster IndustrialSeries AP5300HD3 & AP6300HD3 Bandsaws
Balanced Alloy Wheels
Rigid Table Trunnion
Quick Release Blade Lever
Jet JWBS-14Q Bandsaw
The Jet JWBS-14Q is intended for heavy work and has balanced cast alloy blade wheels, a superb castiron table which can tilt from -10 to +45, and a locking rip fence which is supported at the front and
rear of the table and extends slightly beyond the cast iron table to give an excellent capacity on both
sides of the blade. On the face of the rip fence is a parallel cutting attachment which is ideal for re-
sawing. The mitre fence is T slotted into the table for accuracy, safety and extended capacity. The blad
is guided both above and below the table with micrometer-adjusted thrust and bearing rollers which
give a positive support to the blade, resulting in a very good quality of cut and extended blade life.
With fully interlocked doors, electro-mechanical motor brake, easily accessible, dual function quick
release blade tension for easy blade changing and tracking controls, this machine is for the profession
workshop where an accurate bandsaw with good capacities will become a very popular machine with
which to work. To move this machine around the workshop we recommend the purchase of the mobil
base unit (708119). This additional base unit is easy to fit and allows the machine to be moved without
fear of tipping the unit over or causing any damage to either the operator or the machine.
Model JWBS-14Q
Rating Industria
Power Input 950W (240V
Blade Speed 800m/min
Blade Length 2,560mm (100.1/2
Blade Width Min/Max 3mm (1/8) 25mm (1
Max Width of Cut 350mm
Max Depth of Cut 200mm
Max Width of Cut with Fence 300mm
Table Size 430 x 430mm
Table Tilt 10-0-45
Table Height 880mm
Wheel Diameter 355mm
Dust Extraction Outlet 100mm
Overall L x W x H 900 x 1,100 x 1,800 mm
Weight 120kg
JWBS-14Q Bandsaw 979.50 816.25 95034
2,552mm x 19mm x 4-6Tpi 41.30 34.42 21150
2,552mm x 13mm x 6-10Tpi 38.90 32.42 21202
2,552mm x 13mm x 10-14Tpi 38.90 32.42 21203
Inc.vat Ex. va t Co d
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
11/24
The Jet JWBS saws are intended for heavy work and have cast iron blade wheels, a super cast iron table which can til t from -10 to +45,
and a locking rip fence which is supported at the front and rear of the table and extends slightly beyond the cast iron table to give an
excellent capacity on both sides of the blade. On the face of the rip fence is a point cutting attachment which is ideal for re-sawing. Themitre fence is T slotted into the table for accuracy, safety and extended capacity. The blade is guided both above and below the table
with micrometer-adjusted thrust and bearing rollers which give a positive support to the blade, resulting in a very good quality of cut
and extended blade life.
With fully interlocked doors, electro-mechanical motor brake and with easily accessible blade tension and tracking controls, these
machines are for the professional workshop where an accurate bandsaw with good capacities can become a very popular machine with
which to work. To move any of these machines around the workshop we recommend the
purchase of the mobile base unit (stock number 708119). This additional base unit is easy to
fit and allows the machine to be moved without fear of tipping the unit over or causing any
damage to either the operator or the machine. Q models have blade quick release levers.
N.B. A 20A supply is recommended when used with 240 volt supply.
9Order online www.axminster.co.uk/industrial
Industrial Bandsaws
Jet JWBS-16Q, JWBS-18Q & JWBS-20Q Bandsaws
JWBS-20Q Bandsaw 240V 1,919.50 1,599.58 210
JWBS-20Q Bandsaw 415V 1,919.50 1,599.58 210
3,820mm x 13mm x 6-10Tpi 55.50 46.25 211
3,820mm x 13mm x 10-14Tpi 50.50 42.08 211
3,820mm x 19mm x 4-6Tpi 54.95 45.79 211
Inc.vat Ex. vat C
JWBS-18Q Bandsaw 240V 1,449.50 1,207.92 210683
JWBS-18Q Bandsaw 415V 1,449.50 1,207.92 210684
3,480mm x 13mm x 6-10Tpi 50.99 42.49 211511
3,480mm x 13mm x 10-14Tpi 46.45 38.71 211512
3,480mm x 19mm x 4-6Tpi 54.50 45.42 211513
Inc.vat Ex.va t Co de
JWBS-16Q Bandsaw - 240V 1,239.50 1,032.92 600537
3,124mm x 13mm x 6-10Tpi 42.20 35.17 211502
3,124mm x 13mm x 10-14Tpi 46.40 38.67 211503
3,124mm x 19mm x 4-6Tpi 49.36 41.13 211504
Inc.vat Ex. vat C ode
Model JWBS-16Q
Rating Industrial
Power Input 1,100W (240V)
Blade Speed 900m/min
Blade Length 3,124mm(123)
Blade Width Min/Max 3mm(1/8)/32mm(1.1/4)Max Width of Cut 405mm
Max Depth of Cut 250mm
Max Width of Cut with Fence 355mm
Table Size 430 x 430mm
Table Tilt -10 to +45
Table Height 890mm
Wheel Diameter 420mm
Dust Extraction Outlet 100mm (x 2)
Overall L x W x H 800 x 950 x 1,850mm
Weight 130kg
Model JWBS-2
Rating Industr
Power 2.6kW (240V) - 4.2kW (415
Blade Speed 550 & 970m/m
Blade Length 3,820m
Blade Width Min/Max 3mm(1/8)/32mm(1.1/Max Width of Cut 508m
Max Depth of Cut 300m
Max Width of Cut with Fence 480m
Table Size 530 x 530m
Table Tilt -10 to +4
Table Height 930m
Wheel Diameter 520m
Dust Extraction Outlet 100mm (x
Overall L x W x H 900 x 1100 x 1900m
Weight 230
Model JWBS- 18Q
Rating Industrial
Power 2.6kW (240V) - 4.2kW (415V)
Blade Speed 550 & 970m/min
Blade Length 3,480mm
Blade Width Min/Max 3mm(1/8)/32mm(1.1/4)Max Width of Cut 460mm
Max Depth of Cut 300mm
Max Width of Cut with Fence 410mm
Table Size 485 x 485mm
Table Tilt -10 to +45
Table Height 950mm
Wheel Diameter 470mm
Dust Extraction Outlet 100mm (x2)
Overall L x W x H 900 x 1,100 x 1,900mm
Weight 165kg
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
12/2496 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Bandsaw Blades
Heavy Duty Machine BaseA choice of two all-steel bases, adjustable for size, with fixed wheels on the back corners and two
lockable castoring wheels on the front. The smaller one will fit machine bases from 460mm to 710m
and take a weight of 250kg whilst the larger one takes bases from 610mm to 860mm and a load of
540kg.
Mobile Base 250kg 85.50 71.25 70811
Machine Mobile Base 540kg 95.99 79.99 70811
Inc.vat Ex. va t Co d
This is a primary
wood processing
and ripping
bandsaw bladedelivered ready for
immediate work.
Manufactured from premium
carbon rich European steel, each
tooth is ground using high precision
CNC machinery rather than being
punched and sharp ened. The teeth are
then induction hardened, ensuring an
outstanding life and as many as 20 re-sharpens before the
blades cutting performance is reduced.
These blades offer the longest working life and the best possible
cutting performance. Your
bandsaw is only as good as
the blade thatyou fit. The Ripper 37 has
no compromises.
Adjustable 5 point ball
bearing guides
Model VBS18MW
Rating Industrial
Power Input 2.2kW
Blade Speed Wood 250/450/820m/min
Metal 20/40/70m/min
Blade Length 3,480mm(137)
Blade Width Min/Max 3mm(1/8)/30mm(1.1/8)
Max Depth of Cut 300mm
Max Width of Cut with Fence 460mm
Table Size 485 x 485mm
Table Tilt 45-0-10
Table Height 950mm
Wheel Diameter 470mm
Dust Extraction Outlet 100mm
Overall L x W x H 970 x 1,070 x 1,900mm
Weight 210kg
VBS18MW Bandsaw 230V 1,979.50 1,649.58 600755
3,480mm x 19mm x 4-6Tpi 54.50 45.42 211513
3,480mm x 13mm x 6-10Tpi 50.99 42.49 211511
3,480mm x 13mm x 10-14Tpi 46.45 38.71 211512
Inc.vat Ex. vat Co de
Jet VBS18MW Wood& Metal Cutting BandsawThis bandsaw has been designed for a workshop that requires a wood cutting bandsaw with the
capability of occasional metal cutting, or vice versa. The VBS18MW is capable of cutting timber,
ferrous and non-ferrous metals (using the correct blade). A two speed gearbox lets you choose the
ideal cutting speeds for wood or metal, the three belts speeds givi ng 250, 450 or 820m/min or 20, 40
or 70m/min. Adjustment for the most suitable speed for efficient cutting is straight forward. The
bandsaw is supplied with two chip trays for the separate collection of metal cutting swarf. A large
hand wheel and rack system allows simple adjustment of the cutting height and there is an easy to
read built-in cutting height scale. The blade is well supported above and below the table by ball
bearing guides. A viewing window is provided for easy blade tracking control, the blade runs on
balanced cast iron wheels with crowned, long-life PU tyres. The generous cast iron table tilts from -
10to + 45, and is supplied with both rip cutting and mitre
cutting fences. Standard equipment includes: On/Off NVR switch,
20mm bandsaw blade 2 chip trays, rip fence, mitre fence and
crosscut vice.
All blades are 32mm
(1.1/4") wide x 1.1tpi
3,480mm (137) 117.50 97.92 50107
3,820mm (150) 125.99 104.99 50108
4,010mm (157) 131.99 109.99 50108
4,190mm (165) 139.00 115.83 50107
4,450mm (175) 148.96 124.13 50107
4,600mm (181) 152.50 127.08 50107
5,125mm (202) 172.96 144.13 50107
Inc.vat Ex. va t Co dPacks of 5
3,480mm (137) 33.30 27.75 50110
3,820mm (150) 36.60 30.50 50110
4,010mm (157) 38.40 32.00 50110
4,190mm (165) 40.10 33.42 50109
4,450mm (175) 42.60 35.50 50109
4,600mm (181) 43.99 36.66 50109
5,125mm (202) 49.00 40.83 50110
Inc.vat Ex. va t Co dIndividuals
Bandsaw Blade LengthModel (mm)
Axminster AP5300HD3 4,190
Axminster AP6300HD3 4,600
Axminster HB600A 4,450
A xmi ns te r H B70 0 5, 12 5
Jet JWBS-18Q 3,480
Jet JWBS-20Q 3,820
Jet VBS18MW 3,480
Woodmizer 4,010
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
13/24
A machine in the best traditional fashion, the Axminster Industrial SETM-2HD 2 Head Tenoner is designed and built to withstand
continuous production use. Its cast iron base, column and slid e ways provide a rigid and durable mainframe assembly, and the high
efficiency motors supply ample power. The large, ground cast iron sliding table slides easily on its ball r
supported wheels, and cutter head slide movements are smooth and easily adjusted on dovetail slides
Extremely versatile and taking only minutes to set up, the Axminster Industrial SETM-2HD tenoner is ea
to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fenc
and is secured by a cam action clamp. Its end is then passed between two vertically mounted cutter he
which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering t
top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in
shoulder length are set using the rule on the end stop, and staggered tenons are achieved by simple h
wheel adjustment of the top motor, with digital counters to help the measurements. Each cutting head
provision for profile knives to enable the cross section of the components being jointed to be
matched. Stepped tenons, splayed tenons, double tenons and multiple bridles are all poss
on this versatile
machine.
Combinations of 90
and bevelled cutting
discs with appropriatespacers can also be
fitted to produce
interleaved joints as
used in sash window construction. This
tenoner may also be used to produce comb and
finger joints by replacing the main cutter heads
with the appropriate disc type cutters.
N.B. 16 Amp supply required.
9Order online www.axminster.co.uk/industrial
Industrial Tenoners
Axminster Industrial Series SETM-2HD 2 Head Tenoner
Two separately powered heads
Fully braked individually switched motors
Emergency foot operated stop switch
Full thermal overload protection
Two main heads equipped with four replaceable shear-cutting knives and two spur cutters
Cam action work clamp
Two main cutter heads 175 x 60mm Invaluable in any production workshop
Model SETM-2HD
Rating Industr
Power 2 x 2.2kW (230V 1ph) - 2 x 2.2kW (415V 3pMain Cutter Heads 2,175 x 60m
Vertical Adjustment Bottom Block 0-60m
Vertical Adjustment Top Block 0-100m
Horizontal Adjustment Top Block 32m
Timber Capacity Height Fence @ 45 130m
Timber Capacity Width Fence @ 45 195m
Timber Capacity Width Fence @ 90 310m
Max Length of Tenon Single Pass 155m
Max Length of Tenon Two Passes 205m
Table Size 800 x 310m
Dust Extraction Outlet 2 x 150m
Overall L x W x H 1,320 x 1,020 x 1,560m
Weight 420
SETM-2HD 230V (1ph) 4,359.50 3,632.92 211
SETM-2HD 415V (3ph) 4,189.50 3,491.25 211
K nive s 6 0 x 12 x 1 .5 mm (P kt 10 ) 4 1. 60 34.67 100
Inc.vat Ex. vat C
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
14/24
A machine in the best tradition, the Axminster Industrial Series
SETM-3HD 3 Head Tenoner is designed and built to withstand
continuous production use. Its cast iron base, column and sl ide
ways provide a rigid and durable mainframe assembly, and the
high efficiency motors supply ample power. The large, ground
cast iron sliding table slides easily on its ball race supported
wheels, and cutter head slide movements are smooth and easily
adjusted on dovetail slides.
Extremely versatile and taking only minutes to set up, the
Axminster Industrial SETM-3HD Tenoner is easy to use and
accurate in operation. Work is positioned on the rolling table
against an end stop and a fence, and is secured by a cam actionclamp. Its end is then passed between two ver tically mounted
cutter heads which machine the top and bottom cheeks of the
tenon. The tenon width is set by raising or lowering the top motor,
and its position on the timber by raising/lowering the two motors
in tandem. Variations in shoulder length are set using the rule on
the end stop, and staggered tenons are achieved by simple hand
wheel adjustment of the top motor, with digital counters to help
the measurements. Each cutting head has provision for profile
knives to enable the cross section of the components being
jointed to be matched. The standard scribing head allows many
different configurations of tenons to be achieved.
Stepped tenons, splayed tenons, scribed tenons, double tenons,
and multiple bridles and finger joints are all possible on this
versatile machine. Combinations of 90 and bevelled cutting discs
with appropriate spacers can also be fitted to produce interleaved
joints as used in sash window construction.N.B. 32 Amp supply
required.
98 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Tenoners
Easy cutterblock access
Axminster Industrial SeriesSETM-3HD 3 Head Tenoner
Three separately powered heads
Fully braked individually switched motors
Emergency foot operated stop switch
Full thermal overload protection
Two main heads equipped with four replaceable shear-cutting
knives and two spur cutters
Third scribing head
Cam action work clamp Invaluable in any production workshop
Rating Industria
Power 3 x 2.2kW (230V 1ph) - 3 x 2.2kW (415V 3ph
Main Cutter Heads 2, 175 x 60mm. 1, 125 x 60mm
Vertical Adjustment Bottom Block 0-60mm
Vertical Adjustment Scibing Head 95mm
Vertical Adjustment Top Block 0-100mm
Horizontal Adjustment Scibing Head 95mm
Horizontal Adjustment Top Block 32mm
Scribing Head Shaft Diameter 75 x 30mm
Timber Capacity Height Fence @ 45 130mm
Timber Capacity Width Fence @ 45 195mm
Timber Capacity Width Fence @ 90 310mm
Max Length of Tenon Single Pass 155mm
Max Length of Tenon Two Passes 205mmTable Size 800 x 310mm
Dust Extraction Outlet 2 x 150mm
Overall L x W x H 1,320 x 1,020 x 1,560mm
Weight 470kg
Sliding table and material clamp
SETM-3HD 230V 1ph 4,849.50 4,041.25 21152
SETM-3HD 415V 3ph 4,679.50 3,899.58 21069
K ni ves 60 x 1 2 x 1. 5mm (P kt 10 ) 41. 60 34.67 10072
Inc.vat Ex. va t Co d
Optional Large Scribing HeadThis optional 125 x 65mm scribing head for use with the
Axminster and Sedgwick TESH three head tenoners.
Optional 125 x 65mm Scribing Head 182.50 152.08 90025
Inc.vat Ex. va t Co d
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
15/24 9Order online www.axminster.co.uk/industrial
Industrial Morticers
Axminster Industrial SeriesYC2308 Floor Standing MorticerA heavy duty morticer of 25mm capacity, cast iron construction with a welded steel stand. With many
features such as single handwheel design for both longitudinal and lateral table movement, two
position material clamp for fast clamping, multi-position hand lever positions to provide the correct
leverage for comfortable use, gas strut to provide smooth downward travel of the chisel head, also
allowing travel stop in any position, large storage space in stand cupboard, large table surface with
tall back fence, easily set depth stop for repeat accuracy and feet brackets provided to allow machineto be bolted to the workshop floor. This machine is well suited to the busy workshop and will provide
years of accurate and trouble free use. N.B. A chisel morticer will only work as well as the chisel cuts,
please do not stint on the quality of the chisels you purchase. Accepts 1.3/16 and 13/16 chisels.
Lateral table travel 90mm, longitudinal 400mm.
Single handwheel design for both longitudinal
and lateral table movement
Two position material clamp for fast clamping
of a variety of material sizes
Multi-position hand lever positions to provide
the correct leverage for comfortable use
Gas strut to provide smooth downward travel
of the chisel head
Large storage space in stand cupboard Large table surface with tall back fence
Easily set depth stop for repeat accuracy
Feet brackets provided to allow machine to be
bolted to the workshop floor
Maximum chisel size 25mm (softwood), 19mm
(hardwood)
Chisel bushing size 1.3/16 OD
Model YC 2308
Rating Industrial
Power 750W
Chisel Stroke 125mm
Max Height of Timber with 12.7mm Chisel and Bit 170mm
Max Chisel Size Softwood 25mm
Max Chisel Size Hardwood 19mm
Overall L x W x H 670 x 560 x 750mm
Weight 165kg
YC2308 Floor Standing Morticer 230V 1,069.50 891.25 600801
YC2308 Floor Standing Morticer 415V 1,069.50 891.25 600816
Inc.vat E x. va t Code
Jet 719-AFloor Standing MorticeA floor standing morticer with a 25mm
capacity. The unique screw and fast action n
allows the material clamp to be set across it
length in seconds. With fully adjustable
slideways the morticer has travel in both
directions with lock on the fore and aft setti
The main operating handle has a clever ratc
setting which allows it to be quickly set in th
correct position for optimum leverage. The
depth stop is simple and very effective to us
Along the back of the main table is a mortic
length setting device which allows the mort
length to be pre-set for reduced marking ou
The cabinet base is fabricated from heavy
gauge sheet steel and incorporates a shelf i
the base for storage of chisels, bits and servi
tools. Bushes are provid ed for 3/4, 13/16 an
1.13/16 shank chisels. Supplied with cabine
base, chisel bushings and service tools.
25mm capacity
Accurate and quick-to-change material clamp
Fully adjustable slideways
Ratchet setting on main operating handle
Motor and switch gear are vir tually silent in operat
Simple and effective depth stop
Head rotates 180 for door lock morticing
Cabinet base fabricated from heavy gauge sheet st
Supplied with bushes for 3/4, 13/16 and 1.13/16shank chisels and cabinet base
Model 719Rating Indust
Power Input 1,300
Chisel Stroke 140m
Centre of Chisel to Back Fence 100m
Max Height of Timber with 12.7mm Chisel and Bit 190m
Max Chisel Size Softwood 25m
Max Chisel Size Hardwood 19m
Overall L x W x H 700 x 580 x 950mm (1,550mm inc stan
Weight 110
719A Morticer 240V 963.95 803.29 310
Inc.vat E x. vat C
Japanese Pattern Mortice Chisels & Bits, MetricJapanese Pattern. The auger bit on this type has a point on the end, one cutting spur and a single
spiral for rapid chip clearance. The single spur is easy to sharpen and the bits cut evenly and fast, ev
in the hardest of timbers. N.B. As all the auger bits have to accommodate different machines th
are supplied long and will need cutting with a conventional hacksaw blade to suit the specifi
machine for which purchased.
A = Size
B = Maximum Depth
C = Mounting Diameter
D = Bit Shank Diameter
6 mm 4 5m m 1 3/1 6 5/32 5 5.5 0 46.25 5108 mm 5 6m m 1 3/1 6 5/32 5 5.5 0 46.25 510
1 0m m 7 3m m 1 3/1 6 1/ 4 5 8.9 6 49.13 510
1 2m m 7 9m m 1 3/1 6 3/ 8 6 8.9 9 57.49 510
1 6m m 9 8m m 1 3/1 6 1/ 2 7 8.9 5 65.79 510
2 0m m 1 2 7m m 1 .3 /1 6 1 /2 97 .5 081.25 510
A B C D Inc.vat Ex.vat Co
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
16/24100 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Spindle Moulders
Axminster Industrial SeriesSS-510M Spindle MoulderThis is a good, solid compact spindle moulder, built for
professional use and based around a heavy gauge welded steel
chassis that is powder coated for protection. The table is high
grade cast iron, with a finely ground low friction surface and has
small cast iron sliding table that moves on precision bearings. Th
also has a cam lock material clamp and angle fence. The 30mm
diameter spindle has 100mm travel, is non-tilting and is driven b
a 3hp (1ph) or 4hp (3ph) induction motor via a three speed belt
drive. Having a capacity of 180mm below the table and 200mmabove, a wide range of tooling to handle many tasks can be used
A nicely designed fence/hood assembly is fitted with fully
adjustable fence wings and material hold down guides. The tabl
is pre-drilled for a power feed (Co-Matic AF32 Junior).N.B.
16Amp supply required
Substantial cast iron and welded steel construction
30mm diameter spindle with three spindle speeds
Small cast iron sliding table with work clamp
Comprehensive fence/extraction hood system with
adjustable fences
180mm tool diameter below, 200mm above the table
Choice of 230V 1ph or 415V 3ph versions
Model SS-510M
Rating Industria
Power 2.2kW (230V 1ph) - 2.95kW (415V 3ph
Spindle Travel 100mm
Spindle Diameter 30mm
Max Spindle Projection above Table 100mm
Max Tooling Diameter Above Table 200mm
Max Tooling Diameter Below Table 180mm
Table Height 850mm
Table Size 700 x 600mm
Dust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4
Overall L x W x H 850 x 690 x 1,200mm
Weight 200kg
SS-510M Spindle Moulder 1ph 2,649.50 2,207.92 50100
SS-510M Spindle Moulder 3ph 2,539.50 2,116.25 50100
Inc.vat Ex. va t Co d
Axminster Industrial SeriesSS-512ML Spindle Moulder 3phA rugged medium sized professional spindle moulder with a
deep section, precision ground high grade cast iron table. With a
choice of five spindle speeds and a capacity of 335mm tooling
diameter above the table many deep profiles and rebates can be
machined. Ample power is available from its 4.1kW braked
induction motor and, with a very large access panel, the spindle
speeds are easily changed. A large spindle height control handle
is also provided with an indication gauge for precise spindle
setting. All electrical controls are grouped on the front panel for
convenience along with the spindle speed indicators. The cast
fence and extraction hood is fitted with extra long fence wings,
each individually micro-adjustable for accurate machining. The
table is pre-drilled for a power feed (Co-Matic AF32 Junior).
Precision ground cast iron table with deep sections
30mm spindle with spacing collars
4.1kW 415V motor with five spindle speeds
Maximum tooling diameter above table 335mm
Cast iron fence/extraction hood with extra long
adjustable extensions
All controls grouped on the front panel for
ease of use
Model SS-512M
Rating Industria
Power 4.1kW (415V 3ph
Spindle Travel 170mm
Spindle Diameter 30mm
Max Tooling Diameter Above Table 335mm
Max Tooling Diameter Below Table 210mm
Table Height 870mm
Table Size 1,300 x 850mm
Dust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4
Overall L x W x H 1,300 x 900 x 1,320mm
Weight 530KG
SS-512ML Spindle Moulder 3ph 4,059.50 3,382.92 50100
Inc.vat Ex. va t Co d
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
17/2410Order online www.axminster.co.uk/industrial
Industrial Spindle Moulders
Power Feeds
Co-Matic AF308 Power FeedA heavy duty power feed with four speeds from 2.9 to 11.5m/min
for the 240V 1ph or eight from 2.9 to 23m/min on the 415V 3ph
version. The unit has a 50mm column and a 200mm depth under
the head with a far more powerful motor than the smaller units
previously listed. The three rollers are 50mm wide and provide agreater traction with this increased width. Due to the weight of
this item, it is recommended to fix it directly to the table top of
the machine. For the professional workshop.
Model AF308
Rating Trade
Power 375W
Max Capacity 200mm
Reach 415mm
Feed Speed 2.9 to 11.5m/min (1ph)
2.9 to 23m/min (3ph)
Roller Size 100 x 50mm
Weight 50kg
AF308 Power Feed 240V 701.99 584.99 210134
AF308 Power Feed 415V 690.50 575.42 210135
Replacement Roller (1) 8.86 7.38 100394
Inc.vat Ex. vat C ode
Co-Matic AP34 Power FeedA heavy duty industrially rated power feeder for professional use.
The weight and duty of this machine is adequate for nearly all
production applications. The unit has four feed speeds and three
60mm traction rollers. Four way adjustable mounting arm. A
heavy duty roller is also available as an upgrade if needed. Must
be mounted directly onto the machine. This unit is available
only in 415V 3ph.
Model AP34
Rating Industrial
Power 735W
Max Capacity 215mm
Reach 760mm
Feed Speed 4 - 22m/min
Roller Size 120 x 60mm
Weight 60kg
AP34 Power Feed 415V 752.50 627.08 210138
Replacement Roller (1) 16.45 13.71 100392
Heavy Duty Roller (1) 16.45 13.71 100393
Inc.vat Ex.va t Co de
Co-Matic AP48 Power FeedAn extra heavy duty industrially rated power feeder for
production use. The grip afforded and the choice of speeds of
machine make it suitable for all production applications. The u
has eight feed speeds and four 60mm traction rollers. Four wa
adjustable mounting arm. A heavy duty roller (100393) is also
available as an upgrade if needed. Must be mounted directly o
the machine. This unit is available only in 415V 3ph.
Model AP
Rating Industr
Power 735
Max Capacity 215m
Reach 760m
Feed Speed 2 - 33m/m
Roller Size 120 x 60m
Weight 63
AP48 Power Feed 415V 3ph 852.50 710.42 201
Replacement Roller (1) 16.45 13.71 100
Heavy Duty Roller (1) 16.45 13.71 100
Inc.vat Ex. vat C
Axminster Industrial SeriesSS-512TSL Spindle Moulder 3phA rugged medium sized professional spindle moulder with a
deep section, precision ground high grade cast iron table. An
integrated sliding table runs on six adjustable ball bearings giv
exceptionally smooth travel. The 30mm diameter spindle can t
forward 10 and backwards 45 which has many advantages
including:
Safer working, machining from under the workpiece gives
optimum operator protection
Possibility of machining any size of workpiece
Full use of pressure guards and power feeders without
obstruction
Minimising the load on the spindle bearings to increase the
durability of the machine
Gives perfect dust collection, the waste is directed straight in
the extraction port
Precision ground cast iron table with i ntegrated sliding table
30mm spindle, tilts +10 to -45 to give the greatest flexibility of use
4.1kW 415V motor with 5 spindle speeds
Maximum tooling diameter above table 360mm
Cast iron fence/extraction hood with extra long adjustable extensions
All electrical controls grouped on the front panel for ease of use
Model SS-512T
Rating Industr
Power 4.1kW (415V 3p
Spindle Travel 180m
Spindle Diameter 30m
Max Tooling Diameter Above Table 360m
Max Tooling Diameter Below Table 310m
Table Height 900m
Table Size 1,300 x 960mm inc sliding tabDust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4
Overall L x W x H 1060 x 900 x 1,320m
Weight 650
SS-512TSL Spindle Moulder 3ph 5,009.50 4,174.58 501
Inc.vat Ex. vat C
With a choice of five spindle speeds
and a capacity of 360mm tooling
diameter above the table, many
deep profiles and rebates can be
machined. Ample power is
available from its 4.1kW braked
induction motor and with a very
large access panel, the spindle
speeds are easily changed. Large
spindle control handles are also
provided including an indication
gauge for precise spindle height
setting. All electrical controls are
grouped on the front panel for
convenience along with the spindlespeed indicators. The cast fence and
extraction hood is fitted with extra
long fence wings, each individually
micro-adjustable for accurate
machining. The table is pre-drilled for a
power feed (Co-Matic AF32 Junior).
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
18/24
There is plenty of power in this machine and the robust construction makes it an excellent choice fo
production sanding. The rear drum is micro adjustable to allow for variations of stock removal. Eithe
75mm or 100mm wide abrasive strips can be used and changing the abrasive is a quick and
straightforward operation. The sanding drums are hard rubber coated guaranteeing best results. The
conveyor is guided on
jackscrews to maintain accuracy
throughout the machines life.
The two speed gearbox canmatch the feed rate to different
types of wood, whilst two x
100mm dust extraction ports
help to create a clean working
environment when connected
to a suitable extractor.
There is plenty of power in this machine and the robust construction makes it an excellent choice fo
production sanding. The rear drum is micro adjustable to allow for variations of stock removal. Eithe
75mm or 100mm wide abrasive strips can be used and changing the abrasive is a quick and
straightforward operation. The sanding drums are hard rubber coated guaranteeing best results. The
conveyor is guided on
jackscrews to maintain accuracy
throughout the machines life.
The two speed gearbox can
match the feed rate to different
types of wood, whilst two x
100mm dust extraction ports
help to create a clean working
environment when connected
to a suitable extractor.
102 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Sanders
Axminster Industrial Series Oscillating Belt SanderAn industrial quality oscillating belt sander with many nicely thought out features. Well suited to any
small to medium sized joinery workshop or cabinet makers, it is fully guarded and exceptionally easy
to use. Can be used horizontally as well as vertically, the belt oscillates across the platen 50 times per
minute providing a scratch free finish. In the vertical mode the work table can be raised by means of a
hand wheel and adjusted to give a close gap to the sanding belt. A large quadrant scale give an
accurate indication of the belt inclination for bevel work. An additional use is as a small vertical drum
sander with the fitment of any of the three bobbins (1 1/2, 2, 3) supplied, using a smal l table
assembly surrounding the idler roller. A robust, welded steel stand supports the whole machine and
has a large cupboard for storing sanding sheets and accessories. A very well made and a very useful
machine in any workshop.
N.B. 16A 230V supply must
be used.
Belt runs in any angle between 0 and 90
Precision ground steel plate belt platen with low friction
graphite slip plate
Belt oscillation by heavy duty worm gear mechanism
running in an oil bath
Ground cast iron front table can be fully adjusted for
precise alignment with the belt
2 x 100mm dust ports ensure efficient dust collection
Variable height end table for drum sanding is included
Model 200005
Rating Industrial
Power 1,470W
Belt Speed 960m/min
Belt Size 150 x 2,260mm
Table Size 680 x 305mm
Dust Extraction Outlet 2 x 100mm
Overall L x W x H 1,300 x 700 x 1,215mm
Weight 180kg
200005 Belt Sander 230V 1,589.50 1,324.58 200005
Belt 150 x 2,260mm 80G 7.00 5.83 300414
Belt 150 x 2,260mm 100G 6.65 5.54 300415
Belt 150 x 2,260mm 120G 6.65 5.54 300416
Belt 150 x 2,260mm 150G 6.65 5.54 300417
Belt 150 x 2,260mm 180G 6.65 5.54 300418
Inc.vat Ex. vat Co de
Jet DDS-225Dual Drum Sander
Model DDS-22
Rating Industria
Power Input 5.5kW (415VSpeed 1,400rpm
Feed Speed 2 or 3m/min
Sanding Width Single Pass 635mm
Sanding Thickness Min/Max 0.8/133mm
Sanding Drum Diameter 2 x 152mm
Dust Extraction Outlet 2 x 100mm
Overall L x W x H 1,090 x 1,120 x 1,090mm
Weight 332kg
DDS-225 Sander 415V 2,589.50 2,157.92 11026
Inc.vat Ex. va t Co d
Jet DDS-237Dual Drum Sander
Model DDS-23
Rating Industria
Power Input 8.5kW (415V
Feed Speed 2 or 3 m/min
Sanding Width Single Pass 940mm
Sanding Thickness Min/Max 0.8mm/133mm
Sanding Drum Diameter 152mm
Dust Extraction Outlet 2 x 100mm
Overall L x W x H 1,090 x 1,420 x 1,090mm
Weight 440kg
DDS-237 Sander 415V 3,919.50 3,266.25 70039
Inc.vat Ex. va t Co d
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
19/2410Order online www.axminster.co.uk/industrial
Industrial Extractors
Numatic NV750Workshop Vacuum ExtractorIdeal for the small, home workshop application and offering
unrivalled performance, the NV 750 workshop vacuum extractor
is in a league of its own. Specifically aimed at users of small,
bench top machines and power tools, this extractor is light in
weight and easily stored under the workbench. The head
assembly incorporates a 1,200W TwinFlo vacuum motor
providing ample power for all tasks and has a 10 metre cord set.
The extractor is fitted with a Permatex filter giving filtration
down to 0.5 micron, with the option of fitting a HepaFlo
disposable filter bag if required, a must when machining MDF.
There is a blower socket for the exhaust air which can be directed
away from the workshop if required. The drum assembly
incorporates a 51mm cyclonic inlet connector for large
dust/chips, and a 51mm front entry for use with HepaFlo bags
making this the perfect solution to almost all small workshopapplications. The accessory kit includes a 2.5 metre 51mm flexible
extraction hose with a rubber expanding cuff for l inking to most
workshop machines with up to 58mm dust ports. A 51mm
stainless steel gulper crevice tool is provided for general
workshop cleaning. A 2.9 metre 32mm hose and step down
adaptor for connecting to hand operated power tools or small,
bench top machines are low cost accessories. The accessories
available enable this machine to
be tailored to your own specific
use, making it suitable for many
uses in your workshop. This
machine is the ideal solution for
those requiring something
portable and also to handle a
large range of extraction tasks,
robustly built in heavy gauge
epoxy painted steel, has a 2 yearwarranty and best of all, its
designed and made in England!
Ideal for the small, home workshop application
1,200W TwinFlo vacuum motor & 35L capacity
all steel drum
Three stage filtration down to 0.5 microns,
HepaFlo bags included
Included is a 2.5 metre x 51mm hose with a
flexible rubber cuff
51mm stainless steel gulper crevice tool
Fits many bench top machines, two year
warranty, made in the UK
Model NV750
Rating Industrial
Power 1,200W 230V
Noise Level 70dB
Overall L x W x H 450mm diameter x 650mm height
Weight 11.2kg
NV750 Vacuum Extractor 230V 238.50 198.75 702413
Extraction H os e 2.9m & Ad aptor 27.55 22.96 718085
2.9m 32mm hose 18.35 15.29 210551
Hepaflo Filter Bags NVM-4BH Pkt 10 16.99 14.16 211015
HEPA Module 194.00 161.67 210658Floor Cleaning Kit 82.00 68.33 600071
Clip-on Mobility Chassis 79.96 66.63 210656
Inc.vat E x. vat C ode
When it comes to workshop applications coupled with unrivalled
performance, the NVD 750 workshop vacuum extractor is in a
league of its own. Many operational features are included within
the package which will enable the user to link the extractor to a
machine or hand operated power tool as required. The head
assembly incorporates two 1200W TwinFlo vacuum motors
providing ample power for all but the most demanding of tasks.
The extractor is fitted with a red Filtrex primary filter and a
secondary Permatex filter as standard, with the option of fittinga HepaFlo disposable filter bag if required, a must when
machining MDF. The Filtrex filter also protects the filter system
from impact damage from fast moving larger chips. There is an
exhaust blower socket to enable the exhaust air to be ducted
away from the workshop if required. The 10 meter cable set
provides all round the workshop use from one power point. The
drum assembly incorporates a 100-32mm cyclonic inlet
connector with a 51mm - 32mm reducer making this the perfect
solution to most workshop applications. The accessory kit
provided with this extractor includes a 4 metre, 100mm flexible
extraction hose for linki ng to most small workshop machines, and
a 2.9 metre 32mm hose and step down adaptor for connecting to
hand operated power tools or small, bench top machines. The
accessories available enable this machine to be tailored to your
own specific use, including a mobility chassis, floor cleaning kit
and a HEPA filter module for the ultimate in fil tration, providing
the best performing machine you could possibly want for yourworkshop. This machine is the best solution for those requiring
something portable and also to handle a large range of extraction
tasks, is ruggedly made in epoxy painted steel, has a 2 year
warranty and best of all, is designed and made in England!
2 x 1,200W TwinFlo vacuum motors,
35L capacity all steel drum
Fitted with a red Filtrex primary filter
and a secondary Permatex filter
Filtration down to 0.5 microns
10m easy change cable set
Supplied with 4m x 100mm flexible
extraction hose, 2.9m x 32mm hose and
step down adaptor for power tool use
2 year warranty,
designed and
made in England
Model NVD750
Rating Industrial
Power 2 x 1,200W 230V
Noise Level 79dB
Overall L x W x H 450mm diameter x 650mm height
Weight 12.8kg
NVD750 Vacuum Extractor 230V 343.50 286.25 702412
Hepaflo Filter Bags NVM-4BH Pkt 10 16.99 14.16 211015
HEPA Module 208.50 173.75 210657Floor Cleaning Kit 82.00 68.33 600071
Clip-on Mobility Chassis 79.96 66.63 210656
Inc.vat E x.va t Co de
CHIPS to FINE Dust
Numatic NVD750Workshop Vacuum Extractor
Numatic NVD1500Workshop Vacuum ExtractorLarge capacity coupled with unrivalled performance make the
NVD 1500 workshop vacuum extractor the answer for today
workshop requirements. The head assembly incorporates two
1,200W TwinFlo vacuum motors providing ample power for a
but the most demanding of tasks. The extractor is fitted with a
Filtrex primary filter and a secondary Permatex filter as
standard, offering filtration down to 0.5 micron, with the optio
fitting a Trapit disposable filter bag if required, essential whe
machining MDF. The steel drum assembly has a maximum
capacity of 50 litres, has 2 carrying grab handles,and incorpora
a 100mm cyclonic inlet connector with a 51mm - 32mm reduc
making this the perfect solution to most workshop application
This size drum has been selected as the largest that can still be
easily handled when full of waste material, anything larger wo
present possible problems when requiring emptying. Theaccessory kit included with the workshop vacuum extractor
includes a 4 metre 100mm vacuum hose for linking to most
workshop machines and a 2.9 metre 32mm hose and step dow
adaptor for connecting to a hand operated power tools or sma
benchtop machines. Many accessories are available to tailor th
machine to your requirements, including a HEPA filter module
the ultimate in filtration. This is a rugged and high performing
machine, designed and built in England!
Two x 1,200W TwinFlo vacuum motors
Fitted with a red Filtrex primary filter and a secondary
Permatex filter
50L capacity all steel drum with carrying handles
Supplied with accessory kit which includes a 4 metre 100mm
vacuum hose, a 2.9 metre 32mm hose and step down adapto
Two year warranty
Designed and made in England
Model NVD15
Rating Industr
Power 2 x 1,200W 23
Noise Level 79
Weight 23
NVD1500 Vacuum Extractor 230V 608.95 507.46 702
Floor Cleaning Kit 82.00 68.33 600
Inc.vat E x. vat C
For guidance on performance ratings, please see Dust Extraction section
8/3/2019 Axminster 02 - Industrial Machines_p85-p108
20/24104 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Industrial Extractors
Axminster Industrial SeriesUB-2200VECK Cyclone ExtractorThis is a mobile cyclone dust extractor suitable for small to
medium sized trade workshops. Able to handle most types of
wood waste except for the very finest of dusts. With a 200mminlet this is very suitable for a ducted workshop system, or if
required, you could connect to two machines using the included
2 x 100mm adaptor. Nice and quiet in operation and features
automatic filter cleaning for consistent performance. This
machine is a great all round extractor, able to cope with all but
the largest machines. Supplied with 0.2 micron polyester
cartridge filter, plastic collection bag and steel impeller.
N.B. 16A supply required.
Exceptional per formance
on both fine dusts and chippings
Easy mobility thanks to large castor wheels
Automatic filter cleaning for consistent performance
Low noise levels
Large 123 litre
chipping drum
Filter cartridge captures
99% of dust from
0.2-2 microns in size
Steel impellor in close housing
gives exceptional
perfromance
Model UB-2200ECK
Rating Industrial
Power 1.5kW (230V 1ph)
Noise Level 74dB(A) @ 3m
Overall L x W x H 1,250 x 750 x 1,550mm
Weight 115kg
UB-2200VECK Cyclone Extractor 230V 1,579.50 1,316.25 210642
Inc.vat Ex.va t Co de
Axminster Industrial SeriesUB-3300VECK Cyclone ExtractorThis is a mobile cyclone dust extractor suitable for the medium to
large sized trade workshops. Able to handle most types of woodwaste except for the very finest of dusts. With a 200mm inlet this
is very suitable for a ducted workshop system, or if required, you
could connect to three machines using the included 3 x 100mm
adaptor. Nice and quiet in operation and features automatic filter
cleaning for consistent performance. This machine is a great all
round extractor, able to cope with even large machines. Supplied
with 0.2 micron polyester cartridge filter, plastic collection bag
and steel impellor.N.B. 16A supply required.
Exceptional performance on both fine dusts and chippings
Easy mobility thanks to large castor wheels
Automatic filter cleaning for consistent performance
Low noise levels
Large 277 litre chipping drum
Filter cartridge captures
99% of dust from
0.2-2 microns in size
Steel impellor in close
housing gives exceptional
perfomance
Model UB-3300ECK
Rating Industrial
Power 2.25kW (230V 1ph)
Noise Level 78dB(A) @ 3m
Overall L x W x H 1,200 x 880 x 2,150mm
Weight 139kg
UB-3300ECK Cyclone Extractor 230V 1,869.50 1,557.92 210643
Inc.vat Ex. va t C ode
Axminster Industrial SeriesUB-503 & UB-505 Dust ExtractorsThese are a different style of dust extractor suited to specialist
situations. In a cab