2016PARTS | EQUIPPED/azonicUSAazonic.eu

BUILT FORPUNISHMENT

Azonicusa.com Azonic.eu

To create to a higher standard of excellence is what it’s all about.

For 25 years Azonic products have been pounded and punished by

the world’s fastest. Designing, developing and producing parts and

accessories that can take riders to new heights is more than just a

mission statement – it is the core of our being.

» WHEELSETS » PEDALS » HANDLEBARS » STEMS » SMALL PARTS

BUILT FOR PUNISHMENTTo create to a higher standard of excellence

is what it’s all about. For 25 years Azonic

products have been pounded and punished

by the world’s fastest. Designing, developing

and producing parts and accessories that

can take riders to new heights is more than

just a corporate mission statement – it is the

core of our being.

BUILT FORPUNISHMENT

AZONIC

WHEELSOUTCASTSIZES: 135mm, 26"AVAILABLE COLORS: White/black, red/black

FEATURES • Weight 135mm: 1790g (set) • 6000 Series Aluminum Rim • Stainless Steel Spokes • 7075 Aluminum Spoke Nuts and Cassette Body • Sealed Cartridge Bearings • Welded Joint Rim Technology: Welded joints on rims

allow for a balanced rim weight and eliminate the need for additional material

• Over-Length Spoke Nut Technology: Extra long spoke nuts allow for added strength and stiffness from hub to rim

• Tubeless Tire Compatible: Rims are compatible with standard tubes and all tubeless tire systems. Tubeless valves included

• Interchangeable Axle Options Front: Easily change the axle type to fit all industry standards, QR, 9mm, 15mm and 20mm

• Interchangeable Axle Options Rear: Easily change the axle type to fit all industry standards, QR, 10mm and 12mm

OUTCAST WHEELSETColor Part No.

Red/black 3203-000

White/black 3203-002 red/blackwhite/black

Azonic wheels are Built for Punishment, combining lightweight design with bomb-proof

components and build. We cater for all wheel

sizes, hub widths and axles with our universal

conversion kits. If you ride bikes and need wheels

we’ll have an option for you.

RIDER RILEY JENNER |PHOTO MARCIN BIALAS PHOTOGRAPHY |» |

WH

EELS

ETS

76

OUTLAW 26"SIZES: 135mm, 150mmAVAILABLE COLORS: Ano blue, ano red, ano green,

ano black, white/black

FEATURES • Weight: 135mm 2340g (set), 150mm 2362g (set) • Double-wall, welded, design rim with a wide profile for

extra strength and rigidity • 32 spoke construction for added strength and pedaling

efficiency • 6061-T6 Aluminum rim construction • Front wheel converts from Q/R, 15mm & 20mm thru axles • Comes with conversion kit • 135mm & 150mm rear spacing

OUTLAW 29erAND 650BSIZES: 29" 135mm, 27.5" 135mm or 150mmAVAILABLE COLORS: Black

FEATURES — 29ER • Weight: 2270g (set) • Double-wall pinned rim • 32 spoke construction for added strength and pedaling

efficiency • 6061-T6 Aluminum rim construction • Front wheel converts from Q/R, 20mm axle adaptor • Comes with conversion kit • 142mm rear wheel spacing • Disc only • 8/9 speed compatible

FEATURES — 650B • Weight: 135mm 2254g (set), 150mm 2276g (set) • Double-wall pinned rim • 32 spoke construction for added strength and pedaling

efficiency • 6061-T6 Aluminum rim construction • Front wheel converts from Q/R with a 15mm axle adaptor • Disc only

OUTLAW 26" WHEELSETColor Part No. 135mm 150mm

White/black 3200-8** 40 41

Ano black 3200-8** 00 01

Ano red 3200-8** 06 07

Ano blue 3200-8** 04 05

Ano green 3200-8** 02 03

OUTLAW 29ER & 650B WHEELSETType: Color Part No. 135mm 150mm

29er: black 3200-9** 05 —

650b: black 3200-8** 50 51

29er

650b

WH

EELS

ETS

77

AZONIC

BARS

The original Azonic handlebars in the 1990’s

set a new standard for the industry and our new

range carries on that original pioneering ap-

proach. Available in a variety of widths, sizes and

31.8 or 35mm (with our FAT35 range) we have a

bar for every type of riding.

RIDER JAKUB VENCL |» |

HA

ND

LEB

AR

S78

C.F.K. CArBONFAT35SIZES: 34.9mm, 785mm, 20mm RiseAVAILABLE COLORS: Carbon fiber/white

FEATURES • Super lightweight carbon handlebar • Available in 785mm • Weight: 203g • Clamp size: 34.9mm • 20mm rise, 5° upsweep, 8° bend • Classic matte carbon fiber woven finish

C.F.K. FAT35 HANDLEBARColor Part No. 785mm

Black/white 3002-3** 01

C.F.K. CArBONSIZES: 31.8mm, 750/ 770/ 790mm, 20mm RiseAVAILABLE COLORS: Carbon fiber/white

FEATURES • Super lightweight, carbon handlebar • Available in 750, 770 and 790mm • Weight: 194g (750), 202g (770) and 206g (790) • Clamp size: 31.8mm • 20mm rise, 5° upsweep, and 8° bend • Classic matte carbon fiber woven finish

C.F.K. HANDLEBARColor Part No. 750mm 770mm 790mm

White 3002-1** 00 01 03

white

HA

ND

LEB

AR

S

79

FLOW FAT35SIZE: 34.9mm, 785mm widthAVAILABLE COLORS: Black/red, red, blue, orange,

titanium, black/white, neon yellow, neon orange, neon green, raw

FEATURES • Double-butted 7050 T6 Aluminum • Clamp size: 34.9mm • Available in anodized and neon paint finishes • Marked for custom cut length • Weight: 350g • Width: 785mm • Rise: 18mm • Upsweep: 5° • Backsweep: 7°

FLOW FAT35 HANDLEBARColor Part No. 785mm

Red 3003-5** 02

Blue 3003-5** 03

Orange 3003-5** 04

Titanium 3003-5** 05

Black/white 3003-5** 06

Neon yellow 3003-5** 09

Neon orange 3003-5** 11

Neon green 3003-5** 10

Raw 3003-5** 12

t itanium

blk/red

blk/wht

blue

red

titanium

orange

neon yel

neon grn

neon org

flake red

flake blue

flake gold

raw

red

neon yel

blk/wht

raw

neon grn

neon org

blue

orange

HA

ND

LEB

AR

S80

FLOWSIZES: 31.8mm, 750 & 800mm, 1" or 2" RiseAVAILABLE COLORS: Black/red, red, blue,

orange, titanium, metalflake red, metalflake blue, metalflake gold, black/white, neon orange, neon green, raw

FEATURES • Double-butted 7050 T6 Aluminum • Clamp size: 31.8mm • Anodized with either a sandblasted or

metal flake paint finish • Marked for a custom cut length • Weight: anodized 350g; paint 365g • Width: 800mm or 750mm with either 1"

or 2" rise • Upsweep: 5° • Backsweep: 7°

FLOW 750mm & 800mm HANDLEBAR (Europe)Color EU No. 750,1" 750, 2" 800, 1"

Black/red 3003-*** 101 201 301

Red 3003-*** 102 202 302

Blue 3003-*** 103 203 303

Orange 3003-*** 104 204 304

Titanium 3003-*** 105 205 305

Metalflake red 3003-*** 106 206 306

Metalflake blue 3003-*** 107 207 307

Metalflake gold 3003-*** 108 208 308

Black/white 3003-*** 109 209 310

Neon yellow 3003-*** — — 309

Neon orange 3003-*** 110 210 311

Neon green 3003-*** 111 211 312

Raw 3003-*** 112 212 313

FLOW 750mm & 800mm BARS (USA)Color USA No. 750, 2" 800, 1"

Black/red Ano 3001-2** 10 20

Red Ano 3001-2** 15 25

Blue Ano 3001-2** 13 23

Orange Ano 3001-2** — 27

Gray Ano 3001-2** — 24

Flake red 3001-2** 12 22

Flake blue 3001-2** 11 21

blk/red

blk/wht

blue

red

titanium

orange

neon yel

neon grn

neon org

flake red

flake blue

flake gold

raw

HA

ND

LEB

AR

S

81

WOrLD FOrCeFAT35SIZE: 34.9mm, 18 or 36mm riseAVAILABLE COLORS: Black/red, black/white,

black/blue, black/neon yellow, black/neon green

FEATURES • Double-butted 6061 T6 Aluminum • Clamp size: 34.9mm • 780mm width for ultimate control • Marked for custom cut length • Weight: 350g • Upsweep: 3° • Backsweep: 9°

WOrLD FOrCe318SIZE: 31.8mm, 18 or 36mm riseAVAILABLE COLORS: Black/red, black/white,

black/blue, black/neon yellow, black/neon green

FEATURES • Double-butted 6061 T6 Aluminum • Clamp size: 31.8mm • 780mm width for ultimate control • Marked for custom cut length • Weight: 350g • Upsweep: 3° • Backsweep: 9°

black

blue

orange

red

titanium

flake blue

flake gold

blk/white

blk/white

flake red

blk/blue

blk/red

neon yel

neon yel

neon yel

neon grn

neon grn

blk/red

blk/blue

WORLD FORCE FAT35 HANDLEBARColor Part No. 18mm Rise 36mm Rise

Black/white 3000-7** 00 05

Black/red 3000-7** 01 06

Black/blue 3000-7** 02 07

Blk/neon yellow 3000-7** 03 08

Blk/neon green 3000-7** 04 09

WORLD FORCE 318 HANDLEBARColor Part No. 18mm Rise 36mm Rise

Black/white 3000-9** 00 05

Black/red 3000-9** 01 06

Black/blue 3000-9** 02 07

Blk/neon yellow 3000-9** 03 08

Blk/neon green 3000-9** 04 09

HA

ND

LEB

AR

S82

AGILeSIZES: 31.8mm, 780mm, 1" RiseAVAILABLE COLORS: Black, red, blue, orange,

titanium, metalflake red, metalflake blue, metalflake gold, neon yellow

FEATURES • Double-butted 6061 T6 Aluminum • Clamp size: 31.8mm • High polished finish and paint finish available • Ultimate control with 780mm width bars • Custom marked for a cut length • Weight: 375g polished; 390g paint • Width: 780mm with 1" rise • Upsweep: 5° • Backsweep: 8°

AGILE HANDLEBARColor Part No.

Black 3001-100

Red 3001-101

Blue 3001-102

Orange 3001-103

Titanium 3001-104

Metalflake red 3001-105

Metalflake blue 3001-106

Metalflake gold 3001-107

Neon yellow 3001-109

black

blue

orange

red

titanium

flake blue

flake gold

flake red

neon yel

HA

ND

LEB

AR

S

83

The original Azonic Shorty Stem was an

icon when it came out over 20 years ago.

Our 2015 line-up stays true to the founding

philosophy of being Built for Punishment.

Catering for 31.8 and 34.9mm (with our

FAT35 range) the range combines strength

and a lightweight design to let you focus on

the trail ahead.

AZONIC

StEmS

|« |RIDER JAKUB VENCL |PHOTO NORBERT SZÁSZ

STEM

S84

TerMINATOrDM FAT35SIZE: 34.9mmAVAILABLE COLORS: Black, red, blue,

neon yellow

FEATURES • CNC Machined 6061 T6 Aluminum • Laser etched logos • 34.9mm bore diameter • 25 & 30mm extension • 70mm clamp width • 0° angle • Weight: 135g

TERMINATOR DM FAT35 STEMColor Part No. 35mm

Black 3076-1** 00

Red 3076-1** 01

Blue 3076-1** 02

Neon yellow 3076-1** 03

black neon yel lowblue

red

CLUBSIZE: 31.8mmAVAILABLE COLORS: Black, red, blue,

orange

FEATURES • Direct mount stem • CNC Machined 6061 T6 Aluminum • 31.8mm bore diameters • Laser etched logos • 45-50mm extension • 0° rise • Weight: 150g

CLUB STEMColor EU No. USA No.

Black 3052-001 3050-200

Blue 3052-002 —

Red 3052-003 —

Orange 3052-004 —

blue redorange

black

STEM

S

85

THe rOCKFAT35SIZE: 34.9mmAVAILABLE COLORS: Black, blue, red, neon

yellow, aluminum raw

FEATURES • CNC Machined, 6061 T6 Aluminum • 34.9mm bore diameter • 45mm extension • 0° angle • Stack height: 40mm • Weight: 150g

THE ROCK FAT35 STEMColor Part No. 35mm

Black 3055-1** 00

Blue 3055-1** 01

Red 3055-1** 02

Neon yellow 3055-1** 04

Aluminum raw 3055-1** 05

black neon yel low raw red

blue

PreDATOrSIZE: 31.8mm, 50 or 60mm extensionAVAILABLE COLORS: Black, blue, red, neon

yellow, orange

FEATURES • Light and strong stem perfect for Enduro

riding • CNC Machined 6061 T6 Aluminum • Laser etched logos • 31.8mm bore diameters • 50 & 60mm extension • 40mm stack height • 5° angle • Weight: 113g

PREDATOR STEMColor Part No. 50mm 60mm

Black 3075-1** 00 05

Red 3075-1** 01 06

Blue 3075-1** 02 07

Orange 3075-1** 03 08

Neon yellow 3075-1** 09 10

black blue orange red

neon yel low

STEM

S86

rIOTSIZE: 31.8mmAVAILABLE COLORS: Black, red, blue,

orange, neon yellow

FEATURES • CNC Machined 6061 T6 Aluminum • Laser etched logos • 31.8mm bore diameters • 1 1/8 inch steerer clamps • 40mm extension • 38mm stack height • 0° rise • Weight: 195g (including screws) • Weight per screw: 6g

RIOT STEM (EUROPE)Color Part No. 31.8mm

Black 3053-0** 01

Blue 3053-0** 02

Red 3053-0** 03

Orange 3053-0** 04

Neon yellow 3053-0** 06

RIOT STEM (USA)Color Part No. 31.8mm

Black 3050-2** 10

black neon yel low orangered

blue

PLeASUreDOMeSIZE: 31.8mmAVAILABLE COLORS: Black, blue, red,

orange, aluminum raw

FEATURES • CNC Machined, 6061 T6 Aluminum • 31.8mm bore diameters • 50mm extension • 35mm stack height • 0° rise • Weight: 210g

PLEASURE DOME STEMColor EU No. USA No.

Black 3051-001 3050-230

Blue 3051-002 3050-231

Red 3051-003 3050-232

Orange 3051-004 —

Aluminum raw 3051-005 —

black blue red orange

raw

STEM

S

87

BAreTTAeVO FAT35SIZE: 34.9mm, 40mm or 50mm extensionAVAILABLE COLORS: Black, red, blue,

orange, neon yellow

FEATURES • CNC Machined 6061 T6 Aluminum • Laser etched logos • 34.9mm bore diameters • 40mm and 50mm extension • 38mm stack height • 15° rise • Weight: 196g

BAreTTAII (eVO) SIZE: 31.8mmAVAILABLE COLORS: Black, red, blue,

orange, neon yellow

FEATURES • CNC Machined 6061 T6 Aluminum • Laser etched logos • 31.8mm bore diameters • 40mm extension • 38mm stack height • 15° rise • Weight: 196g

BARETTA EVO FAT35 STEMColor Part No. 40mm 50mm

Black 3050-*** 300 400

Blue 3050-*** 301 401

Red 3050-*** 302 402

Orange 3050-*** 303 403

Neon yellow 3050-*** 309 409

BARETTA II (EVO) STEMColor EU No. USA No.

Black 3050-200 3050-220

Blue 3050-201 3050-221

Red 3050-202 3050-222

Orange 3050-203 3050-223

Neon yellow 3050-206 —

blue

blue

red

red

neon yel low

neon yel low

orange

orange

black

black

STEM

S88

RIDERS BERND WINKLER & MARKUS SAURER |PHOTO NORBERT SZÁSZ |» |

STEM PREDATOR BLUE |» |

STEM

S

89

WOrLDFOrCe FLAT SIZE: One sizeAVAILABLE COLORS: Black, red

FEATURES • The ultimate flat pedal developed over 2

years with top riders • True concave platform acheived through

platform shape and pin height • CNC machined 6061 T6 Aluminum body • Strong 4130 chromo axle • Parallel ridges on inboard, outboard and

middle of body for additional grip • Perfect balance of weight, durability and

strength • Weight: 380g • Outboard + center bearings; Inboard

bushing, for long-life and smooth running • Spare pins and tool included

black redWORLD FORCE FLAT PEDALSColor Part No.

Black 3120-100

Red 3120-101

Our range of flat pedals has been developed

with riders to produce products than give 100%

confidence when hitting the most technical

and challenging of trails. From entry-level nylon

to top-of-the-range CNC platforms you’re

guaranteed never to lose your feet so you can

forget about your components and concentrate

on the riding.

AZONIC

PEDALS

PED

ALS

90

black

neon yel low

FLAT IrON SIZE: One sizeAVAILABLE COLORS: Black, neon yellow

FEATURES • Fatty pins for durability and use with

knobby shoes • Micro pins for decreased weight and

increased traction • Customize your pedals to your riding style

by using a mixture of pin configurations • Damaged pins can be removed from

either side of the pedal • 6061-T6 forged Aluminum body • 4130 Chromo axle • Oversized sealed outboard bearing with

additional internal bushing • Pin removal tool and spare pins included • Average weight: 345g/pair (385g with

pins/pair)

FLAT IRON PEDALSColor Part No.

Black 3056-900

Neon yellow 3056-901

BIGFOOT SIZE: One sizeAVAILABLE COLORS: Black, neon yellow

matte, aluminum raw

FEATURES • Premium flat pedal for MTB weighing in

at only 370g/pair • Great stability and contact with the bike

(120 x 110mm) • Great pedal clearance with a 12mm

profile • Outboard axle locking nuts for tension

adjustment and removing play • Forged and CNC machined 6061

Aluminum body which is lightweight, thin and strong

• Forged 4130 Aluminum Chromo axle • Dual IGUS bearings for smooth running • 32 grippy and durable pins • Contains 4 spare pins

BIGFOOT PEDALSColor Part No.

Black 3062-101

(Matte) Neon yellow 3062-103

Aluminum raw 3062-104

raw

black matte neon yellow

PED

ALS

91

WICKeD rL SIZE: One sizeAVAILABLE COLORS: Black, blue, orange,

red, silver

FEATURES • CNC machined extruded Aluminum • Double anodized and high-polish finish • Platform: 105 x 100mm; only 6.5-9mm

thin • DU/sealed bearings • CNC Chromo axle • Weight: only 310g/pair

WICKED RL PEDALSColor Part No.

Black 3059-200

Blue 3059-201

Orange 3059-202

Red 3059-203

Silver 3059-205

AMX/DMX PEDALSColor EU No. USA No.

Black 3057-111 3056-720

Blue 3057-112 3056-721

Orange 3057-113 3056-724

Red 3057-114 3056-723

Titanium 3057-115 3056-722black orange

blue

titanium

red

red orange blue

black

si lver

AMX/DMX SIZE: One sizeAVAILABLE COLORS: Black, blue, orange,

red, titanium

FEATURES • Removable pins and a wide non-slip

platform and an impressive variety of colors to choose from

• Extruded body with flat surface and no axle bulge

• CNC machined Aluminum • DU/sealed bearings • CNC Chromo axle • Platform: 105 x 95mm; thickness: 14-17mm • 16 super durable and removable steel pins • Weight: 420g with pins/pair

PED

ALS

92

KAMIKAZE PEDALSColor Part No.

Matte black 3064-100

Neon yellow 3064-101

Neon green 3064-102

Neon red 3064-103

Raw 3064-104

matte black neon grn raw neon org

neon yel

blue

black

KAMIKAZe SIZE: One sizeAVAILABLE COLORS: Matte black, neon

yellow, neon green, neon red, raw

FEATURES • Super thin (10mm) and super light

die-cast pedal • 105 x 101mm platform • Weight: 328g/pair • 4130 Chromoly, CNC machined, axle

with dual sealed bearings • Painted surface or RAW Version without

paint • 9 replaceable R9 steel pins per pedal

PEDALS KAMIKAZE RAW|» |

PED

ALS

93

AMerICANA SIZE: One sizeAVAILABLE COLORS: Matte black, red, blue,

orange, titanium, neon yellow

FEATURES • Versatile and durable flat pedal • Die-cast platform 105 x 93mm • 364g/pair • CNC machined, 4130 Aluminum Chromo

axle • Durable DU bushings, and dual-sealed

bearings, for maximum protection against the elements

• Painted and anodized finish • 32 replaceable R9 alloy pins: 16 per

pedal (8 per side) • 4 spare pins included

PUCKer UP SIZE: One sizeAVAILABLE COLORS: Black, red, blue,

orange

FEATURES • 20 replaceable pins • 1 sealed bearing and 1 DU bushing • Platform: 105 x 93mm; thickness: 16mm • Tough, painted surface • Weight: 516g/pair

AMERICANA PEDALSColor Part No.

Matte black 3063-101

Red 3063-102

Blue 3063-103

Orange 3063-104

Titanium 3063-105

Neon yellow 3063-107

PUCKER UP PEDALSColor EU No. USA No.

Black 3060-100 3056-750

Blue 3060-101 3056-751

Red 3060-102 3056-752

Orange 3060-103 3056-753

orange

matte black

blue

black

blueorangered

neon yel low red titanium

PED

ALS

94

SHOO-IN PEDALSColor EU No. USA No.

Black 3061-100 3056-760

White 3061-101 3056-761

Orange 3061-102 3056-763

Red 3061-103 3056-762

BLAZE PEDALSColor Part No.

Black 3065-101

White 3065-102

Red 3065-103

Neon green 3065-104

Neon yellow 3065-105

orange red

neon grnblack neon yel

white

black

white

red

SHOO-IN SIZE: One sizeAVAILABLE COLORS: Black, white, red,

orange

FEATURES • Chromo spindle • Loose ball bearings • Grippy, molded pins • Weight: only 322g/pair

BLAZe SIZE: One sizeAVAILABLE COLORS: Black, white, red,

neon green, neon yellow

FEATURES • Extremely durable, fiber-reinforced,

nylon flat pedal • Shares high-quality bearing and spindle

technology from the Azonic CNC pedals • Platform: 105 x 100mm; thickness: 16mm • Weight: 350g/pair • CNC machined, 4130 Aluminum Chromo

spindle • Durable DU bushings, and dual-sealed

bearings, provide maximum protection against the elements

• 24 durable and grippy, replaceable steel pins: 16 per pedal (8 per side)

PED

ALS

95

AZONIC SMALL

PARtS

|« |RIDER LUANA OLIVEIRA

AC

CES

SOR

IES

96

DrOP-IN rLTeLeSCOPIC SIZE: 30.9mm, 34.9mm, 31.6mmAVAILABLE COLORS: Black

FEATURES • Only 660g - (70g lighter than previous

version) • New micro adjustment and improved

dust seal • In-line saddle mount • Single tube seatpost with separate air

and oil system • Remote control handlebar-mounted lever • Adjustable air pressure • Made from CNC machined, 7050

Aluminum with laser etched logos • Available in 30.9. 31.6 and 34.9mm • Tube length: 330mm; travel: 110mm

DROP-IN RL SEATPOSTColor Part No. 30.9/34.9 31.6

Black 3600-2** 00 01

PIN IT SEATPOST (EUROPE)Color Part No. 27.2mm 30.9mm 31.6mm 34.9mm

Black 3610-1*** 001 002 003 004

Blue 3610-1*** 010 011 012 013

Red 3610-1*** 020 021 022 023

Orange 3610-1*** 030 031 032 033

PIN IT SEATPOST (USA)Color Part No. 27.2mm 30.9mm 31.6mm 34.9mm

Black 3033-2** 00 10 20 30

Blue 3033-2** 01 11 21 —

Red 3033-2** 02 12 22 —

Orange 3033-2** 03 13 23 —

redorangeblackblue

PIN IT SIZE: 27.2, 30.9, 31.6, 34.9AVAILABLE COLORS: Black, blue, red,

orange

FEATURES • 6061 T6 forged Aluminum • 2 bolt clamp • High polished finish • Laser etched logos • 350mm length • Available in 27.2, 30.9, 31.6 and 34.9mm • Weight: 290g

AC

CES

SOR

IES

97

GONZO CLAMP SIZE: 28.6mm, 31.8mm, 34.9mmAVAILABLE COLORS: Black, blue,

red, green, (ti) gray, orange

FEATURES • Made from forged and CNC

machined 6061-T6 Aluminum • Laser etched logos • Available in 28.6mm, 31.8mm

and 34.9mm • Weight: 35g

q/rCLAMP SIZE: 28.6mm, 31.8mm, 34.9mmAVAILABLE COLORS: Black, blue, red,

green, gray, orange

FEATURES • Seat clamp designed for both MTB

and BMX use • Strong and efficient clamp design • 7075 Aluminum construction • Sizes: 31.8mm and 34.9mm • Weight: 34g (31.8mm),

36g (34.9mm)

LOGO GrIP & rAZOrWIre GrIP SIZE: One sizeAVAILABLE COLORS: Gray, green, red,

copper (orange), purple, black, blue

FEATURES - LOGO GRIP • Thin recessed grip profile for maximum

feel • Anodized aluminum lock-on collars • Grip length: 130mm • Allen screws to tighten collars • Comes as grip set with collars and

plugs

FEATURES - RAZOR WIRE GRIP • Raised grip profile for a thicker grip

with sticky rubber • Anodized aluminum lock-on collars • Grip length: 130mm • Allen screws to tighten collars • Comes as grip set with collars and

plugs

GONZO SEAT CLAMP (EUROPE)Color EU No. 28.6 31.8 34.9

Black 3034-*** 300 100 200

Blue 3034-*** 301 101 201

Gray 3034-*** 304 104 204

Green 3034-*** 305 105 205

Orange 3034-*** 303 103 203

Red 3034-*** 302 102 202

GONZO SEAT CLAMP (USA)Color Part No. 28.6 31.8 34.9

Black 3033-1** 40 41 42

Blue 3033-1** 60 61 62

Ti Gray 3033-1** 90 91 92

Green 3033-1** 80 81 82

Orange 3033-1** 70 71 72

Red 3033-1** 50 51 52

Q/R SEAT CLAMPColor Part No. 31.8 34.9

Black 3033-1** 17 100

Blue 3033-1** 32 —

Red 3033-1** 26 —

Azonic Logo grip set

Razor Wiregrip set

LOGO GRIPS (USA)Color USA No. Logo

Orange 3019-0** 03

Red 3019-0** 02

Blue 3019-0** 01

Black 3019-0** 00

LOGO & RAZOR WIRE GRIPS (EU)Color EU No. Razor Logo

Gray 3300-*** 101 201

Green 3300-*** 105 205

Copper 3300-*** 104 204

Purple 3300-*** 102 202

Red 3300-*** 103 203

Blue 3300-*** 106 —

Black 3300-*** 100 200

razor: black

razor: blue

razor: red

logo: green

logo: purple

logo: gray

razor: copper

GONZO CLAMP 28.6 31.8 34.9BLACK 3033-140 3033-141 3033-142RED 3033-150 3033-151 3033-152BLUE 3033-160 3033-161 3033-162ORANGE 3033-170 3033-171 3033-172GREEN 3033-180 3033-181 3033-182TITANIUM 3033-190 3033-191 3033-192

AC

CES

SOR

IES

98

THRUST BOTTLE CAGEColor Part No.

Black 4120-100

Silver 4120-101

Neon yellow 4120-102

SPLATTerFeNDer SIZE: One sizeAVAILABLE COLORS: Black/white, black/

neon yellow, black/neon green

FEATURES • Mount front or rear • Universal fit for front and back: 8 holes • Comes with 4 zip ties (and 4 spares) • Polypropylene • Weight: 33g

THrUSTBOTTLe CAGe SIZE: One sizeAVAILABLE COLORS: Black, silver, neon

yellow

FEATURES • Bottle cage suitable for all frames • Standard bottle cage mount spacing • Flat section next to frame keeps bottle

stable • Additional flat tab on top of cage adds

extra stability • Steam-lined, tapered, low profile design

keeps the cage away from feet when not in use

• Laser-etched logos • Available in black, silver or neon yellow

black si lver neon yel low

SPLATTER FENDERColor EU No. USA No.

Black/neon grn 3080-100 3021-001

Black/neon yel 3080-101 3021-002

Black/white 3080-102 3021-000

MYSTerYFeNDer SIZE: One sizeAVAILABLE COLORS: Black, white, red,

orange

FEATURES • Mount front or rear • Universal fit for front and back: 8 holes • Comes with 4 zip ties (and 4 spares) • Polypropylene • Weight: 33g

MYSTERY FENDERColor Part No.

Black/white 3081-101

neon green neon yel low

white

AC

CES

SOR

IES

99

SPLATTerSADDLeFeNDer SIZE: One sizeAVAILABLE COLORS: Black/white,

black/fluo yellow, black/fluo green

FEATURES • Clips under your saddle to keep you

clean and dry, off or on road • Perfect balance of coverage and stream-

lined design - 110 (W) x 305 (L)mm • Supplied with 4 zip-ties • Stealth black and neon colors available • Fit-and-forget – tough polypropylene • Weighs only 20g

SADDLE FENDERColor Part No.

Black/fluo grn 3082-201

Black/fluo yel 3082-202

Black/white 3082-200 fluo greenwhitefluo yel low

UMMA GUMMACHAINSTAYPrOTeCTION SIZE: S: 250mm x 95mm, M: 250mm x

130mm, L: 250mm x 180mmAVAILABLE COLORS: Black/white, black/

neon yellow, black/neon green

FEATURES • Made from strong neoprene • Silicon anti-slip strips on the inside • S: 18g / 250 x 95mm • M: 29g / 250 x 130mm • L: 42g / 250 x 180mm

AZONICSTICKerS SIZES: 20 Pack Stickers or Die Cut

Stickers: 6", 18", 36"

UMMA GUMMA CHAINSTAY PROTECTIONColor Part No. S M L

Black/neon grn 3090-*** 100 101 102

Black/neon yel 3090-*** 200 201 202

Black/white 3090-*** 300 301 302

DIE CUT STICKERSColor Part No. 6" 18" 36"

Black 5055-*** 410 510 610

White 5055-*** 401 501 601

neon greenneon yel low

white

LARGEMEDIUM

SMALL

20pk St ickers:5010-115

AC

CES

SOR

IES

100

reCOILALLOY HUBS SIZES: Front; 32 hole, 36 hole or 29er,

Rear; 135mm, 150mm or29erAVAILABLE COLORS: Black, red, blue, green

FEATURES - FRONT HUB • 32 hole front hub converts from QR to

15mm and 20mm (THRU. Axle) • Comes with conversion kit • Axle: 9 x 108mm (QR Type) • P.C.D.: 58mm • F.T.F.: 60.4mm • Offset: 6mm • Pawls: 3 • Bearings: 2 • Weight: 236g

FEATURES - REAR HUB • 32 hole, 7075 Aluminum hub body • Converts from QR to 12mm x 135mm

bolt on axle • 3 pawl design with 25 engagement

points • Hub Material: Aluminum • Axle Material: 135mm CR-MO, 150mm

Aluminum • Axle 135mm: 10 x 145mm (QR Type) /

12mm (THRU. Axle) • Axle 150mm: 12mm (THRU. Axle) • P.C.D.: 58mm • F.T.F.: 135mm 58.4mm, 150mm 74.45mm • Offset: 7mm • Pawls: 3 • Bearings: 4 • Weight: 135mm; 430g, 150mm; 445g

reCOILALUMINUM AXLe SIZES: 12mm x 135mm

FEATURES • An astonishing 102g • Ultra lightweight T-7000 series Aluminum

for maximum strength and durability

MOMeNTUMAXLe SIZES: 12mm x 135mm

FEATURES • Perfect for any 12mm x 135mm bolt on

application or to just add strength to your current set-up

• Ultra strong 4130 Chromoly construction • 3/8 axle step down dropout • Weight: 136g

AXLe ADAPTOr SIZES: 15mm or 20mm

FEATURES • 15 mm thru. axle spacers • 20 mm thru. axle spacers

OUTLAWCONVerSIONKIT SIZES: 135mm, 150mm or 142mm, 157mm

FEATURES • Converts wheel spacing

RECOIL ALLOY FRONT HUBColor Part No. 32 Hole 36 Hole 29er

Black 3200-*** 814 007 915

Red 3200-*** 815 — —

Blue 3200-*** 820 — —

Green 3200-*** 821 — —

RECOIL ALLOY REAR HUBColor Part No. 135mm 150mm 29er

Black 3200-*** 816 818 916

Red 3200-*** 817 819 —

front: black front: green

front: red

front: blue

rear: black

rear: red

recoil : 3200-004

momentum: 3200-003

142mm: 3200-639, 157mm: 3200-640

135mm: 3200-637, 150mm:3200-63815mm: 3200-008 20mm: 3200-009

AC

CES

SOR

IES

101

BONANZA LeD LIGHT OUTPUT: 1600 lumenAVAILABLE COLORS: Black anodized

FEATURES • Our ultimate off-road night-riding light, or for those

riders who really want to see and be seen on the roads! • Black anodized CNC machined lightweight Aluminum

body with waterproof seals • Ideal for off-road night-rides with 1600 lumen from 4

powerful Cree LEDs • Mount on handlebars with versatile QR mount system • Compact remote battery pack (only 285g) which can

be stowed in a pack or fastened to the bike • Lightweight lamp unit: only 140g • 3 beam settings and strobe • Charger included for fast 5hr charge to full battery

from flat • Run time = 3.5 to 15hrs

BONANZA LED LIGHTColor Part No.

Black 3410-100

AZONIC

LED LIGHTSPHOTO OLLY TOWNSEND Cloud9Trails |» |

LIG

HTI

NG

102

BeNLeD LIGHT OUTPUT: 1200 lumenAVAILABLE COLORS: Black anodized

FEATURES • 1200 lumen front Cree LED light • Black anodized CNC machined

Aluminum body with waterproof seals • Mount on handlebars or helmet with versatile

QR mount system • Compact remote battery pack • Lightweight = 140g (+ 285g battery pack) • 3 beam settings and strobe • Recharger included for fast 5 hr charge to full

battery from flat • Run time = 3.5 to 15hrs

LArAMYLeD LIGHT OUTPUT: 850 lumenAVAILABLE COLORS: Black anodized

FEATURES • Anodized CNC machined Aluminum body with

waterproof seals • Ideal for off- road night-rides with 850 lumen

from the powerful Cree LEDs • Modes: High, Eco, Flash • Mount on handlebars or helmet with versatile

QR mount system • Super lightweight = only 61g (+ 281g battery

pack), perfect as a helmet light • Run time = 3.5 to 15hrs

BEN LED LIGHTColor Part No.

Black 3404-100

LARAMY LED LIGHTColor Part No.

Black 3902-001

LIG

HTI

NG

103

HOSSLeDLIGHT OUTPUT: 400 lumenAVAILABLE COLORS: Black anodized

FEATURES • 400 lumen white Cree LED light • Perfect Light Distribution (PLD) lens

technology • 4 settings: 400lm, 200lm, 100lm and 150lm

flash • Black CNC Aluminum machined housing

with waterproof seals • Integrated rechargeable battery with USB

connection • Lightweight: only 95g • Run time = 2-10hrs depending on setting • Available as single or in a pair with Sulu red

USB

LeD MOUNTS AVAILABLE OPTIONS: Bar/helmet mount, universal rubber strap, head strap

HOSS LED LIGHTColor Part No. Hoss Sulu Combo

Black 3403-*** 100 200

hoss / sulu

head strap universal strap

helmet/bar

hoss

GLC LeDLIGHT OUTPUT: 220 lumenAVAILABLE COLORS: Black

FEATURES • Compliant with German lighting legislation • STVZO for road legal use • 220 lumen • Li-ion battery giving up to 120hrs run-time • USB rechargeable (6hrs) • High quality and durable Aluminum and

ABS construction • Weight 135g

GLC LED LIGHTColor Part No.

Black 3903-100

LIG

HTI

NG

104

LITTLeJOe LeDLIGHT OUTPUT: 100 lumenAVAILABLE COLORS: Black or silver anodized

FEATURES • Powerful 100 lumen Cree LED white light • Perfect Light Distribution (PLD) lens

technology • 4 settings: 100lm, 50lm, 30lm and flash • Black CNC Aluminum machined housing

with waterproof seals • Integrated rechargeable battery with USB

connection • Lightweight: only 50g • Run time = 2-7hrs depending on setting • Available as single or in a pair with Sulu red

USB

ADAMLeDLIGHT OUTPUT: 200 lumenAVAILABLE COLORS: Black or silver anodized

FEATURES • 200 lumen white Cree LED light • Perfect Light Distribution (PLD) lens technology • 4 settings: 200lm, 100lm, 50lm and

90lm flash • Black CNC Aluminum machined housing with

waterproof seals • Integrated rechargeable battery with USB

connection • Lightweight: only 55g • Run time = 1-4.5hrs depending on setting • Available as single or in a pair with Sulu red

LITTLE JOE LED LIGHTColor Part No. Little Joe Sulu Combo

Black 3401-*** 100 200

Silver 3401-*** 101 —

ADAM LED LIGHTColor Part No. Adam Sulu Combo

Black 3402-*** 100 200

Silver 3402-*** 101 — adam / sulu

l itt le joe / sulu

adam: black adam: s i lver

l i tt le joe: s i lverl i tt le joe: s i lver

hoss

LIG

HTI

NG

105

BINGOLeDLIGHT OUTPUT: 140 lumenAVAILABLE COLORS: Black/silver

FEATURES • 140 lumen LED front light • Complies with STVZO German

legislation • Road legal cycling light • Tough waterproof ABS housing with

waterproof seals • Integrated rechargeable battery with

USB connection • Intelligent beam adjusts to surrounding

light conditions • Run time: 6-10hrs with battery charge

indicator • Smart Beam Technology adjusts beam

intensity to prevent blinding oncoming road users

• Available as single front or in a pair with Banjo rear

BONGOLeDLIGHT OUTPUT: 100 lumenAVAILABLE COLORS: Black/silver

FEATURES • 40 to 100 lumen LED front light • Complies with STVZO German legislation • Road legal cycling light • Tough waterproof ABS housing with water-

proof seals • Rechargeable "AAA" batteries supplied • Run time = up to 2hrs with battery charge

indicator • Available as single front or in a pair with

Banjo rear

BINGO LED LIGHTColor Part No. Bingo Banjo Combo

Black 3406-1** 00 01

BONGO LED LIGHTColor Part No. Bongo Banjo Combo

Black 3407-1** 00 01

bingo

bingo / banjo

bongo

bongo/banjo

LIG

HTI

NG

106

SULUUSBLeD LIGHT OUTPUT: 15 lumen front, 7 lumen rearAVAILABLE COLORS: Black, red or silver

anodized

FEATURES • Weighs only 25g. Size: 27mm diameter,

21mm height • 15 (front) and 7 (rear) lumen output • 3 setting: constant beam, long flashing

and rapid flash • Black Aluminum machined housing with

waterproof seals • Integrated rechargeable battery with

USB connection • Compact and lightweight • Integrated universal rubber quick-release

mount • Run time = 2.5hrs constant beam; 5hrs

flashing modes • Available as single white, single red, as a

combo with white and red

front: black rear: black

front: red rear: red

front: s i lver rear: s i lver

SULUBATTerYLeD LIGHT OUTPUT: 15 lumen front, 7 lumen rearAVAILABLE COLORS: Black, red or silver

anodized

FEATURES • Only 25g and 27mm diameter, 21mm

height • 15 (front) and 7 (rear) lumen output • 3 setting: constant beam, long flashing

and rapid flash • Black Aluminum machined housing with

waterproof seals • 2 x CR2032 batteries per light, easily

available after-market • Compact and lightweight • Integrated universal rubber quick-release

mount • Run time = 30hrs constant beam; 60hrs

flashing modes • Available as single white, single red, as a

combo with white and red SULU BATTERY LED LIGHTColor Part No. Front Rear Sulu Combo

Black 3400-*** 100 300 500

Silver 3400-*** 101 301 501

Red 3400-*** 103 303 —

front: black rear: black

front: red rear: red

front: s i lver rear: s i lver

integrated rubberquick-release mount

integrated rubberquick-release mount

SULU USB LED LIGHTColor Part No. Front Rear Sulu Combo

Black 3405-*** 200 400 600

Silver 3405-*** 201 401 601

Red 3405-*** 203 403 —

LIG

HTI

NG

107

BUNGA LeD LIGHT OUTPUT: 6 lumenAVAILABLE COLORS: Black

FEATURES • 6 lumen LED rear light • Complies with STVZO German legislation • Road legal cycling light • Tough waterproof ABS housing with waterproof seals • AAA batteries supplied • Run time = up to 45hrs

BANJO LeD LIGHT OUTPUT: 8 lumenAVAILABLE COLORS: Black

FEATURES • 8 lumen LED rear light • Complies with STVZO German legislation • Road legal cycling light • Tough waterproof ABS housing with waterproof seals • CR2032 batteries supplied • Run time = up to 50hrs

BUNGA LED LIGHTColor Part No.

Black 3409-100

BANJO LED LIGHTColor Part No.

Black 3408-100

AZONIC

PUmPHEADS

DV(ENTRY) MATERIAL: Injected ABS (on Riva)

INCLUDES: • Presta • Schrader • Dunlop • Thumb lock lever

LIG

HTI

NG

108

AZONIC

PUmPSDVA(MED-HIGH) MATERIAL: Injected compositeAluminum (on eASY)

INCLUDES: • Presta • Schrader • Dunlop • Clever Twin Head • Thumb lock lever

DVC(MEDIUM) MATERIAL: Injected composite(on Arco, Alluse & GO)

INCLUDES: • Presta • Schrader • Dunlop • Clever Twin Head • Thumb lock lever

SI(HIGH) MATERIAL: Aluminum (on Alluse& GO)

INCLUDES: • Presta • Schrader • Dunlop • Screw-in head

BIK

E PU

MPS

109

e-ASY DVAFLOOr PUMP PRESSURE: 12.4bar / 180psiAVAILABLE COLORS: Green

FEATURES • Beautifully designed heavy duty steel foot, barrel

and piston • Wood handle • 43"/130cm extra-long, premium-grade hose • Patented "Clever Head" with thumb lock lever fits

securely to Presta, Schrader and Dunlop valves • Long travel piston with reduced barrel diameter lowers

required pumping effort • Includes needle and cone chuck attachments • 180psi / 12.4bar max • High quality floor-mounted 6.5cm / 2.5" gauge - High

quality floor-mounted 6.5cm/2.5" gauge

E-ASY FLOOR PUMPColor Part No.

Green 3804-106

ALLUSe DVC /SI PUMP PRESSURE: 11bar / 160psiAVAILABLE COLORS: Black, neon yellow

FEATURES • Heavy duty steel foot, barrel and piston • Wood handle • DVC: 43"/130cm extra-long, premium-grade hose,

with patented “Clever Head” with thumb lock lever fits securely to Presta, Schrader and Dunlop valves

• SI: 43"/130cm extra-long, premium high quality aluminum-garde hose with screw-in head for the perfect connection

• Long travel piston with reduced barrel diameter lowers required pumping effort

• Includes needle and cone chuck attachments • 160psi / 11bar max • 6.4cm / 2.5" gauge

ALLUSE FLOOR PUMPColor Part No. DVC SI

Black 3802-1** 00 01

Neon yellow 3802-1** 03 —

DVC: black DVC: neon yellowSI head

BIK

E PU

MPS

110

ArCO DVCFLOOr PUMP PRESSURE: 16.5bar / 240psiAVAILABLE COLORS: Black, neon yellow

FEATURES • High quality ABS foot, steel barrel and piston • Soft Touch handle • 43"/130cm extra-long, premium-grade hose • Patented “Clever Head” with thumb lock lever fits

securely to Presta, Schrader and Dunlop valves • Long travel piston with reduced barrel diameter lowers

required pumping effort • Includes needle and cone chuck attachments • 160psi / 11bar max • High mounted 5cm / 2" gauge

ARCO FLOOR PUMPColor Part No.

Black 3801-100

Neon yellow 3801-101

black neon yellow

rIVA DVFLOOr PUMP PRESSURE: 11bar / 160psiAVAILABLE COLORS: Black, neon yellow

FEATURES • High quality ABS foot, steel barrel and piston • Soft Touch handle • 43"/130cm extra-long, premium-grade hose • Thumb lock lever fits securely to both Presta and

Schrader valves • Long travel piston with reduced barrel diameter lowers

required pumping effort • Includes needle and cone chuck attachments • 160psi / 11bar max • 5cm/2" gauge

RIVA FLOOR PUMPColor Part No.

Black 3800-100

Neon yellow 3800-101

black neon yellow anthrazite blue

BIK

E PU

MPS

111

B52 DIGITAL(SHOCK)HAND PUMP PRESSURE: 20.8bar / 300psiFITS: All shocks and forksAVAILABLE COLORS: Neon yellow

FEATURES • The ultimate shock pump with digital gauge • High quality, durable and lightweight

Aluminum barrel and handle • Non-scratch sealing head for accurate air

delivery and leakage prevention • Inflates to 300psi • Highly sensitive bleed valve for fine-tuning • Compatible with all leading shocks and forks • Compact design in stealth black anodized

finish

FOrTreSS(SHOCK)HAND PUMP PRESSURE: 20.8bar / 300psiFITS: All shocks and forksAVAILABLE COLORS: Neon yellow

FEATURES • Compatible with all rear shocks and forks • High-pressure up to 300psi / 20.8bar • 2-3psi micro-adjust button for fine-tuning • Non-scratch rubber sealing system • High quality Aluminum barrel and handle • Analogue gauge with aluminum housing for

clear and accurate pressure monitoring

B52 DIGITAL (SHOCK) HAND PUMPColor Part No.

Neon yellow 4011-001

FORTRESS (SHOCK) HAND PUMPColor Part No.

Neon yellow 4009-002

X1 (HP AND HV)HAND PUMP PRESSURE: HP: 8.3bar / 120psi, HV: 5.5bar / 80psiAVAILABLE COLORS: Black

FEATURES • High quality, durable and lightweight Aluminum barrel

and handle with tough plastic trim • Aluminum thumb lock and beveled adjuster for

secure valve connection • HP: High-Pressure capacity, inflating to 120psi /

8.3bar • HV: High-Volume capacity, inflating to 80psi / 5.5bar

in few strokes • Reinforced plastic barrel with dust cap to protect

when not in use • Compatible with Presta, Schrader and Dunlop valves • ONLY 120mm (55g) – the ultimate ultra-compact

lightweight design for weight-conscious riders • HP version also available in longer 185mm (80g)

version

X1 HAND PUMPType: Color Part No. XS SM

HV: Black 4010-1** — 02

HP: Black 4010-1** 00 01

BIK

E PU

MPS

112

MOSqUITO(HP AND HV)HAND PUMP PRESSURE: HP: 7bar / 100psi, HV: 5.5bar / 80psiAVAILABLE COLORS: Black, silver

FEATURES • Compact lightweight design for ease of stowing and

transporting • Durable and lightweight Aluminum barrel • Integrated extendable flex-hose with aluminum thumb

lock for secure valve connection • HV: High-Volume capacity, inflating to 80psi / 5.5bar

in few strokes • HP: High-Pressure capacity, inflating to 100psi / 7bar • Reinforced plastic barrel with dust cap to protect

when not in use • Compatible with Presta, Schrader and Dunlop valves

MOSQUITO HAND PUMPColor Part No. HV HP

Black 4001-0** 03 01

Silver 4001-0** 02 —

SR-71 HAND PUMPColor Part No. SM LG

HV: Black 4021-0** 01 02

HP: Black 4020-0** 01 02

hv: black hp: s i lver

eXXO HVHAND PUMP PRESSURE: 5.5bar / 80psiAVAILABLE COLORS: Black

FEATURES • Compact lightweight design • 2-tone soft-touch rubber handle which extends

and rotates through 90º into and T-handle for improved grip when inflating

• Durable and lightweight Aluminum barrel • Inflates to 80psi / 5.5bar • Reinforced plastic barrel with dust cap to

protect when not in use • Compatible with Presta, Schrader and Dunlop

valves

EXXO HAND PUMPColor Part No.

Black 4000-001

Sr-71 (HP AND HV)HAND PUMP PRESSURE: 9.8bar / 140psiAVAILABLE COLORS: Black

FEATURES • High pressure mini-pump – inflate to 140 PSI! • Compact lightweight design for ease of stow-

ing and transporting • Only 180mm length • Lightweight – only 85g • Smart valve for easy swapping between Presta,

Schrader and Dunlop • High quality CNC machined aluminum body • Plastic bracket included

BIK

E PU

MPS

113