1 www.CRE-Marine.com Tel: + 44 01224 872 445 Fax: + 44 01224 873 710 Email: [email protected]‘B’ Electrical Connector Subsea / Underwater / Marine The most common applications: ROV • Dive Bell Connectors • Underwater Cameras and Lights • Underwater Thruster • Strain Termination • Key Feature: Multi size shell body • Up to 38 contacts • Pressure up to 9,300 Psi (Mated) • Open face pressure up to 9,300 Psi • Oil filled available as standard (OF) • Up to a working voltage of 1000 VDC dependant • on pin/contact density and wire specification used. Up to 50 amps single pin - see page 16 • Revision 2021-04
ROV•Dive Bell Connectors•Underwater Cameras and Lights•Underwater Thruster•Strain Termination •
Key Feature:
Multi size shell body •Up to 38 contacts•Pressure up to 9,300 Psi (Mated)•Open face pressure up to 9,300 Psi•Oil filled available as standard (OF)•Up to a working voltage of 1000 VDC dependant •
on pin/contact density and wire specification used.Up to 50 amps single pin - see page 16•
Revision 2021-04
1
INTERFACE TYPE
BR - BULKHEAD CONNECTOR RECEPTACLECONNECTOR SIZE NUMBER OF CONTACTSM - MALE/F- FEMALECABLE LENGTH IN MM (IE 900 MM) CABLE GAUGE NUMBER
BR B 07 M 0900 24 01
M - MALE/F- FEMALE
CABLE GAUGE NUMBER
OF-OIL FILLED
CONNECTOR SIZE
INTERFACE TYPE
PL- PLUG IN LINE
NUMBER OF CONTACTS
CABLE LENGTH IN MM (IE 900 MM)
PL B 07 M OF 0900 24 01
2
Standard Mechanical Specification:
NOTES:
Contact CRE for special order materials.
Options: Pressure balanced Oil Filled (PBOF)• Field Installable• Mixed contact sizes for power/data requirement• Bespoke design/configuration to suit customer requirements at no extra cost• Available in alternative materials: Aluminium, Titanium etc.•
Testing:
Pressure testing up to 9,300 Psi• Durability testing with 100 mate and re-mate cycles• Open face pressure testing up to 9,300 Psi•
Notes:For more information’s contact CRE.For Coax Insert information see page 16
NOTE: For recommended Torque figures please refer to page 17Revision 2021-04
0.8
0.8
0.8
0.8 0.8
A-Hex. B C D E F G H J-'O'Ring K L TYPE30 42 60 35 27 13 25.4 1.0"-14 UNS BS023 36 25.45/25.5 1330 49.5 60 29 27 13.8 19.2 3/4"-16 UNF BS019 30 19.25/19.3 1430 49.5 60 26 27 13 16 5/8"-18 UNF BS017 27 16.05/16.1 15
A B C D E F G H-'O'Ring J K L TYPE32 21.5 25.5 35 27 N/A N/A BS023 1.0-20 UN 37 N/A 1932 21.5 21 35 27 26 25.4 BS023 1.0-20UN 37 25.45/25.5 20
NOTE: Customer should check that your custom wiring detail is suitable for the chosen Interface bore sizes shown.
A B C D E-'O' Ring TYPE51 30.4 31.7 20.5 21 x 1.65 01
A B C D E-'O' Ring F-'O'Ring G-'O'Ring BORE H TYPE87.25 35.25 31.7 12.5 21 x 1.65 6 X 1.5 22 X 2 8.5 0292.25 35.25 31.7 19.5 21 x 1.65 6 x 1.5 22 x 2 15.5 03
A B C D E F-'O'Ring G-'O'Ring H-'O'Ring BORE J TYPE93.25 35.25 31.7 12.5 36.5 21 x 1.65 6 x 1.5 22 x 2 8.5 0193.25 35.25 31.7 19.5 36 21 x 1.65 6 x 1.5 22 x 2 15.5 02
78 35.25 31.7 15 36.5 21 x 1.65 6 x 1.5 22 x 2 11 03
NOTES: Current rating maybe impacted by cable selection•Different pin configurations contact CRE•Standard cable gauge for 4,6,7 way - 16 AWG ; 9 &12 Way - 18AWG• 10,16,17,18,19, way - 22 AWG• Single pin rate: up to18Amp / Voltage: up to1000v• Multi pin rate contacts - Please contact [email protected]•
4 72
4 WAY 600 VDC
1
7 WAY 600 VDC
3
6 WAY 600 VDC
12
34
5
61
2
3
4
5
64
72
4 WAY-HYBRID 600 VDC
1
7 WAY-HYBRID 600 VDC
3
1
2
34
5
6
47
2
4 WAY-HYBRID 600 VDC
1
7 WAY-HYBRID 600 VDC
3
1
2
3 4
5
6
10
59
12 1
6
114
7
2
8
3
0.75 Pin
12
34
5
6
6 WAY-HYBRID 2 600 VDC
12
34
5
6
1
7 3
5
8 WAY-HYBRID 600 VDC
2
46
8
1
73
5
8 WAY-HYBRID 600 VDC
2
4 6
8
12
3 5
6 WAY-HYBRID-2 600 VDC
1
4
6
1
98
6 512
1011
2
34
7
12 WAY-HYBRID 2 600 VDC
12 WAY-HYBRID 2 600 VDC
74
3
211
10
125 6
89
1
For current carrying capacity and wiring recommendations see page 17
Revision 2021-04
11
2
12
13
109
4
6
1
3
5
13 WAY HYBRID 600 VDC
7
8
13 WAY HYBRID 600 VDC
4
10311
2
6
1
812
5
9 13
7
7
Socket Face View
5
6 24
1
4
6 WAY- HYBRID 600 VDC
1
3
5
6
3
5
3
6 WAY-HYBRID 600 VDC
6
1
42
14All dimension in mm
NOTES: Current rating maybe impacted by cable selection•Different pin configurations contact CRE•Standard cable gauge for 21 way-22 awg, 28,38 way - 24 AWG• Single pin rate: up to18Amp / Voltage: up to1000v• Multi pin rate contacts - Please contact [email protected]•
For current carrying capacity and wiring recommendations see page 17
Revision 2021-04
15All dimension in mm
NOTES:
Current rating maybe impacted by cable selection•Different pin configurations contact CRE•Standard cable gauge for 9 way - 18AWG• 10,12,16 way - 22 AWG• Single pin rate: up to18Amp / Voltage: up to1000v• Multi pin rate contacts - Please contact [email protected]•
