Page 1
B) Procurement of Science & Mathematics Kits by State Governments
The Division of Educational Kits, NCERT has developed technically sound criteria for the manufacture of the Science and Mathematics Kits and accordingly 23 firms were empanelled for a period of one year (till March 2015) for manufacturing and supplying kits developed by NCERT. In view of a letter from MHRD, Govt. of India on 14.06.2013 to review the practice of State Government placing orders with NCERT for Science and Mathematics Kits. NCERT has reviewed the policy and taken the following decisions:-
1. The State Government will be allowed to place orders directly with the firms empanelled by NCERT and a copy of the said order will also be sent to NCERT along with 5% of the total cost of order as the License Fee.
2. The States may empanel firms on their own too and place orders based on the technical specifications provided by NCERT. In this case too, 5% of the total cost of order will be sent to NCERT as the License Fee.
3. The State Government will ensure thorough quality check so that Science and Mathematics Kits are made as per the technical specifications of the NCERT.
4. The list of firms empanelled with NCERT, approved rate list of the Kits and technical specifications of each kit will be uploaded on NCERT website and communicated to all State Governments.
List of NCERT Science & Mathematics Kits with approved L-1 price
Sl.No.
Type of Kits
Kit Purchase Price
(excluding taxes,
transportation,
loading and
unloading charges
etc.)
1. Upper Primary Science Kit Rs.5,925/-
2. Secondary Science Kit Rs.5,400/-
3. Sr. Secondary Microscale Chemistry Laboratory Kit Rs.4,200/-
4. Solid State Model Kit Rs.110/-
5. Molecular Model Kit Rs.110/-
6. Upper Primary Mathematics Kit Rs.888/-
7. Secondary Mathematics Lab Kit Rs.1,100/-
8. Secondary Science Lab Kit (Biology) Rs.4,302/-
9. Secondary Science Lab Kit (Physics) Rs.2,950/-
10. Secondary Science Lab Kit (Chemistry) Rs.1,800/-
Page 2
Annexure-1
List of empanelled firms kit-wise.
S.No. Types of Kits Name of The Firm
1 Upper Primary Science Kit (UPSK) 1) Scientific Instt.Ambala Cantt.
2) Nirman,Ahmedabad
3) Jain Scient.Suppliers Ambala .
4) Rapsons Lab.Services Ambala.
5) Laboratory Instt. Ambala
6) Shree Ent. Ambala Cantt
7) Modern Sci. Co.Raipur (CG)
2 Secondary Science Kit (SSK)
1) Apollo International Indore.
2) Arora Medilines P.Ltd,Noida
3) Nirman,Ahmedabad
4) Interlabs HAS, Ambala Cantt
5) Jain Scient.Suppliers Ambala .
6) Royal Scientific, Keshopur(Hy)
7) Alpha Chem, Ambala
8) Rapsons Lab.Services Ambala.
9) Laboratory Inst. Ambala .
10) Shree Ent. Ambala
3 Senior Secondary Micro scale Chemistry
Lab Kit (SSMCLK)
1) Scientific Instt.Ambala Cantt.
2) Sumit Scientific Ind. Delhi.
3) Nirman,Ahmedabad
4) Rapsons Lab.Ser.Ambala.
5) Modern Sci.Co. Raipur (CG)
6) Chinar Scient Ind.Delhi
4 Solid State Model Kit (SSMK) 1) Nirman , Ahmedabad.
2) Rapsons Lab. Ser. Ambala.
3) Modern Sci.Co.Raipur (CG)
4)Nischal’s Smart Learning Solutions
Pvt.Ltd , Hyderabad
5 Molecular Model Kit (MMK) 1) Apollo International, Indore.
2) Nirman, Ahmedabad.
3) Rapsons Lab. Ser. Ambala.
4) Swan Chemicals, Indore.
5) Modern Sci. Co. Raipur (CG)
6)Nischal’s Smart Learning Solutions
Pvt.Ltd , Hyderabad
6 Upper Primary Mathematics Kit (UPMK) 1) Apollo International, Indore.
2) Sachdeva Instt Co,Ambala
3) Sumit Sci.Ind.Delhi
4) Nirman,Ahmedabad
Page 3
5) Rapsons Lab.Services Ambala.
6) Swan Chemicals, Indore
7) Hansraj Sci. Ambala Cantt
8) Modern Sci. Co.Raipur (CG)
9) Chinar Sci. Ind. Delhi.
10) Asha Ent.Bilaspur (CG)
7 Secondary Mathematics Lab Kit (SMLK) 1) Ahuja Sci.&Sports,Ambala.
2) Sachdeva Instt Co,Ambala
3) Nirman,Ahmedabad
4) Interlabs HAS, Ambala Cantt
5) Rapsons Lab.Services Ambala.
6) Modern Sci. Co.Raipur (CG)
8 Secondary Science Lab Kit (Biology) 1) Ahuja Sci.&Sports,Ambala.
2) Scientific Inst.Traders Ambala
3) Nirman,Ahmedabad
4) Alpha Chem, Ambala Cantt.
5) Rapsons Lab.Services Ambala.
6) Exhibitor Instt. Ambala.
7) Laboratory Inst. Ambala
8) Shree Enter.Ambala
9) Swan Chemicals, Indore
10) Modern Sci. Co.Raipur (CG)
11) Asha Ent.Bilaspur (CG)
9 Secondary Science Lab Kit (Physics)
1) Sumit Scientific Ind. Delhi.
2) Nirman,Ahmedabad
3) Jain Scient.supplier Ambala
4) Singhsons Scient.Trad.Ambala.
5) Kapur Scient.Trader Ambala.
6) Exhibitor Instt, Ambala.
7) Laboratory Instt. Ambala.
8) Shree Ent.,Ambala
9) Chinar Scient Ind.Delhi
10 Secondary Science Lab Kit (Chemistry) 1) Scientific Inst. Trader, Ambala
2) Sumit Scientific Ind., Delhi.
3) Nirman, Ahmedabad
4) Jain Scientific, Ambala
5) Alpha Chem, Ambala Cantt.
6) Rapsons Lab.Services Ambala.
7) Singhsons Scientific, Ambala
8) Kapur Scientific, Ambala
9) Exhibitor Instt. Ambala.
10 Laboratory Inst. Ambala
11 Shree Enter.Ambala
12 Swan Chemicals, Indore
13 Modern Sci. Co.Raipur (CG)
14) Chinar Scientific Ind., Delhi
15) Nischal’s Smart Learning Solutions
Pvt.Ltd , Hyderabad
Page 5
Addresses of empanelled firms.
1 Apollo International, 80-81,Shanti Niketan, Behind Bombay Hospital, Indore-
452010 (MP) Tel. 0731-2017076 Mob-09303337070,09303337080, Fax: 0731-
4225185 [email protected]
2. Arora Medilines Pvt. Ltd., G-69, Sector-6, Noida-201301, Ph.0120-2422593 /
601/602 Fax: 0120-2422603 / 4315086, Email:[email protected]
3. Sumit Scientific Industries, 10566/14, Andha Mughal, Near Sabzi Mandi, Railway
Station, Delhi-110007, Ph. 011-23699898 Mob: 9999504015 Email
[email protected]
4. Nirman, 35, Vasant Kunj Society, New Sharda mandir Road,
Paldi, Ahmedabad-380007 Gujarat
Factory : 1204, Kerela Gidc, Bavla Bagodara Highway, Taluka-Bavla, Distt.
Ahmedabad-382220 Gujarat
Contact No. (M) +91 9825057346, +91 9825414454 Telefax:079-40033002
Our Delhi Address (Branch): 5625/27, First Floor, Agarsen Bhavan, Basti Harphool
Singh, Sadar Bazar, New Delhi
Contact No. (M) +91 9811158994 (O) 011-23517619
Factory: A-41, Sector-65, Noida – U.P.
Contact No. +91 9717392137
Email : [email protected]
5. Swan Chemicals, I/82, L.I.G. Colony, Indore-452008 (MP) Ph-0731-3258833, Fax-
0731-4225185, Mob. 09303337070, 09303370801 e-mail:
[email protected]
6. Modern Scientific Company, Opp. Gurudwara Station Road,
Raipur-492009 (CG) Ph.0771-2523557,4023557, Fax-0771-4023557 Mob-98271-
23557,9826123557, 9802323557, 9479202227 Email- [email protected] ,
[email protected] , [email protected]
7. Chinar Scientific Industries, G-33, Street No.2, Pratap Nagar, Delhi-110007
Ph. 011-23694321, 9953241414
[email protected] , [email protected]
8. Asha Enterprises, Near Head Post Office, Tilak Nagar, Bilaspur,
Chattisgarh-495001 Telefax-07752-411747
[email protected]
9. Nischals Smart Learning Solutions Pvt. Ltd., 5th
Floor, Varun Towers-I, Begumpet,
Hyderabad-500016, (A.P.) Tel-040-32584602/32584635 email- [email protected]
Page 6
10. Jain Scientific Suppliers, #2475, Hargolal Road, Ambala Cantt-133001 Haryana
Mob. 09416020104 email- [email protected]
11. Scientific Instrument Traders, 2484, Adjacent Hargolal Factory, Ambala Cantt-
133001 Haryana Mob. 09996264444 & 09996674444 [email protected]
12. Sachdeva Instruments Co., 3574, Timber Market, Ambala Cantt-133001 Haryana
Ph.0171-2641866 / 4003574, Mob. 09355583001, 09355583003 Email-
[email protected]
13. Interlab Has, 6262/9 & 6262/26, Idgah Road, Cross Road No-8, Interlabs Complex,
Ambala Cantt-133001 Haryana Ph-0171-2633304 / 4007890 Fax: 0171-2643484
Mob-98120301484, 9813364700, 9896020484 Email- [email protected] ,
[email protected]
14. Alpha Chem., 341, Industrial Growth Center, HSIDC, Jagadhri Road, SAHA, Distt.
Ambala-133104 Haryana Mob..09215756270 [email protected]
15. Kapur Scientific Traders, 2759/2D, Timber Market, Ambala Cantt-133001 Mob.-
Mr. Rajiv Kapur - 09896123032, Mr. Sanjiv Kapur - 09255990000 Telefax-0171-
2642921
[email protected] , [email protected]
16. Singhsons Scientific Traders, 2500/4, Hargolal Road, Ambala Cantt-133001
Haryana, Ph-0171-2630870, 0171-2630106 (R), Fax-0171-2631115 Mob-
09416085526, 09215935111 email- [email protected] ,
[email protected] Skype Id singhsons2500
17. Exhibitor Instruments, 4364, Science Market, Ambala Cantt-133001, Haryana, Tel
(0171) 4004422/ 2606061, Fax- 0171-2606060 Mob- 093544 44422, 09416004422,
09466953044 Email [email protected] , [email protected]
18. Royal Scientific Works, Village Keshopur, PO Sambhalkha, Dist. Ambala-133001
Ph.0171-4006154 Fax No. 0171-4005215 Mob. Mr. Ajit Singh - 09466659154, Mr.
Vinod Sareen - 09416180747 email- [email protected] , [email protected]
19. Ahuja Scientific & Sports Works, Nicholson Road, Opp. Bank of Maharashtra,
Ambala Cantt-133001 Ph.0171-4001603 / 4001604 / 2642323(O) / 4001605(R) Fax
0171-4007323 [email protected] , [email protected]
20. Rapsons laboratory Services, 19/4, Mahesh Nagar, Ambala Cantt-133001 , Ph-0171-
6536717 fax-0171-2663983 Mob-09215900718, 09253611718 Email-
[email protected] , [email protected]
Page 7
Branch Office: AG-293, Ground Floor, Shalimar Bagh, New Delhi
Mob.08447890822
21. Laboratory Instruments and Chemicals, Cross Road No-5, Near Classic Hotel,
Grain Market, Ambala Cantt-133001 Ph-0171-2642216 / 2641219, Fax:0171-
2643506 [email protected]
22 Shree Enterprises, 6273, Kida Nath Buildings, Nicholson Road,
Ambala Cantt-133001 Ph-0171-4007323
23 Hans Raj Scientific Metal Works, 3669 Kali Bari Road, Ambala Cantt.-133001. Ph.
0171-4008491 Fax 0171-2630491 Mob.9416269857 e-mail ;
[email protected]
Page 8
Technical Specifications of the Kits.
Sl.
No.
Type of Kits Details of
Specification
1. Upper Primary Science Kit
Annexure -1
2. Secondary Science Kit
Annexure -2
3. Sr. Secondary Microscale Chemistry Laboratory Kit
Annexure -3
4. Solid State Model Kit
Annexure -4
5. Molecular Model Kit
Annexure -5
6. Upper Primary Mathematics Kit
Annexure -6
7. Secondary Mathematics Lab Kit
Annexure -7
8. Secondary Science Lab Kit (Biology)
Annexure -8
9. Secondary Science Lab Kit (Physics)
Annexure -9
10. Secondary Science Lab Kit (Chemistry)
Annexure -10
Page 9
ANNEXURE-1
Upper Primary science Kit (UPSK)
Technical Specification
S.No Item Name Technical Specification Quantity
per Kit 1 Kit Box
with carton
6 ply
Main Body of 24 SWG and doors and partitions of 26
SWG M.S.Sheet. Doors will be fitted 15 mm above
the ground level with main body. Right hand door
should have two racks with 2 size of holes to
accommodate 47 containers/vails. The rack partition
should have guides (as per sample) for free
movement. Rack size 220mm x 100mm x 15mm.
M.S.Sheet 24SWG. 1st rack should have 18 holes dia
26 mm and 2nd rack to have 29 holes (dia. 15 mm 20
holes. And dia 26mm 9 holes) Inside painted Light
Grey. Main body and doors may be of different
matching colours. The doors should have suitable
piano hinges duly spot welded/riveted etc. with main
body. Provision for locking system (as per sample) &
two folding type handle 4mm dia for carrying box.
Provision for supporting rest for hanging doors to be
made as per sample. allover box size 530 x 305 x
460mm.
As per sample and drawing.
01 No.
2 Panel for Connections MDF Wooden box / plastic ABS
170 mm x 140 mm, Taper 50 mm back and 20 mm
front side, painted white, markings in black.
DC Voltmeter :
0 - 20 V with resolutions of 0.4 V,
0 – 1 Amp. with resolutions of 20 mA.
Rectifier :
Four diode rectifier bridge circuit (Full wave
rectification of AC).
Panel connections :
For input / output etc.
As per sample.
01 No.
3 Light Emitting Diod (LED) Standard.
01 No.
4 Laboratory
Thermometer
Glass, alcohol filled, -10º C to 110º C, graduation 1º
C with card board/plastic cover and cotton at both
ends.
01 No.
5 Clinical Thermometer Oral Clinical thermometer along with packing,
graduation 95º F - 108º F and 35º C - 43º C. ISI mark.
01 No.
6 Spherical Plano Concave
Lense and Double Convex
Lense
Three perspex pieces : Spherical Plano Concave
Lense, Double Convex Lense and Plano Convave
Lense. Each made from Perspex sheet of size 50 mm
x 20 mm x 12 mm.
As per sample.
01 Set
7 Perspex Plano Convex
Cylindrical Lense
Dia = 25 mm , half of the diameter x 15 mm height
01 No.
8 Square Glass Slab Square glass slab, size 50 mm x 50 mm x 12 mm 01 No.
Page 10
thick.
9 Triangular Glass Prism Glass Prism 25 mm equilateral triangle. 01 No.
10 Compound Microscope ISI Marked Microscope : Metal Body, overall height
320 mm, base 125 mm x 200 mm approx. Achromatic
good quality lenses.
Two Objectives : 10x & 45x. Two Eyepieces : 10x &
15x having coarse fine motion & fixed condenser.
As per sample.
01 No.
11 Generator Assembly Assembled in perspex transparent sheet, stable body,
overall height 130 mm, thick rectangular base 170
mm x 120 mm attached with two coils, output 15 V
and 500 mA.
As per sample.
01 No.
12 Boiling Tube Borosilicate Glass, 90 mm height x 20 mm dia with
cork.
02 Nos.
13 Y-Tube Borosilicate Glass tube, diameter 12 mm. Overall
length 105 mm fitted with cork (To fit into item No.
15 bell jar inner side).
As per sample.
01 No.
14 Cover Slips Thickness 0.2-0.3 mm approx. 18 mm square glass
pieces.
20 Nos.
15
Bell Jar
Borosilicate 3.5 mm thick glass, neck inside dia
18mm into 20 mm height (18 mm for upper and lower
ends both). Overall length 90 mm x inside dia 55 mm
with rim diameter 64 mm.
As per sample.
01 No.
16
Double mouthed flask
Borosilicate. Thickness 1.5 mm with one mouth dia
26 mm x 25 mm height (with rim) and other dia 06
mm x 28 mm length. Bulb outer dia 48 mm with
overall length 110 mm.
As per sample.
01 No.
17 Glass Tube Length 155 mm x outer dia 06 mm, Soda glass, ends
finished.
01 No.
18 Glazed Glass plate Glass plate size 100 mm x 100 mm x 2.5 mm.
01 No.
19 Double Concave Lens Glass, Focal length 20 cm and dia 50 mm.
01 No.
20 Double Convex lens Glass, Focal length 20 cm and dia 50 mm.
01 No.
21 Concave Mirror Glass, Focal Length 20 cm, dia 5 cm.
01 No.
22 Convex Mirror Glass, Focal Length 20 cm, dia 5 cm.
01 No.
23 Graduated Syringe standard, plastic, capacity 10 mL.
01 No.
24 Protractor Transparent, plastic, standard, 0 - 180º .
As per sample.
01 No.
25 Ping pong ball Standard.
As per sample.
01 No.
26 Thermocol Ball As per sample. 20 No.
27 Transparent PVC plastic tube Dia 8 mm x 1 meter
As per sample.
01 No.
28 Electroscope Assembly Alumunium Disc dia 52 mm and thickness 24 SWG,
ii) aluminium rod dia 03 mm and length 50 mm. fitted
in center of disc (i) (iii) rubber cork axial length
25mm. and dia of smaller face 17 mm inserted in the
aluminium rod with bigger face touching the disc (i).
Page 11
iv) Aluminium rod has a right angle bent of length 08
mm from the outer end .
29 Plastic sheet HDPE Size 100 X100X3 mm. 01 No.
30 Plane mirror strips Good quality, 150 X 30 X 2 mm.
03 Nos.
31 Magnifying glass Optical glass, focal length 120 mm, with plastic
handle.
02 Nos.
32 Glass slides Standard.
As per sample.
10 Nos.
33 Permanent Glass slides Hydra showing budding. Packed in plastic case.
01 No.
34 Permanent Glass slide Amobea showing Binary Fission. Packed in plastic
case.
01 No.
35 Permanent Glass slide Paramecium Packed in plastic case.
01 No.
36 'G' Clamp 50 mm jaws, maximum opening 40 mm, with two
locking screws and holes. HDPE
As per sample.
02 Nos.
37 Glass Rod Length 150 mm, dia 07 mm.
02 Nos.
38 Fuses & Model showing
heating effect of current
Resistance wire enclosed in transparent plastic
container of dia 25 mm and height 50 mm. and eureka
wire 40 SWG .
As per sample.
01 No.
39 Ray Streak Box U shape mild sheet of 24 SWG. Size of the front face:
100 mm x 70 mm with M shape window of size of 30
mm x 30 mm starting from centre bottom side of front
face. Size of two side faces: 40 mm x 70 mm. butt
welded to the front face. Size of the M shape window
cover : 30 mm x 40 mm. Front face, projected to the
height of 15 mm having 3 slits of 0.75 mm thickness
starting from bottom. Height of slits 30 mm, second
slits at the centre. Distance between the slits 5 mm.
Screw type bulb holder spot welded from inside of
front face at the centre of the window. Having one
bulb 3.2 V, bulb to be projected in the windows of
front face. Complete apparatus painted black.
Supplied along with plane mirror, convex and concave
mirror of aluminium sheet. Size of front face : 85 mm
x 70 to 75 mm.
As per sample
40 Electric bell Plastic base 190 x 120 x 15 mm, attached with steel
bell cover of dia 77 mm, two brackets attached to MS
strip for striker to bell along with rectangular coil
having 26 SWG super enameled copper wire of 600
turns (225 gm wire) and iron core to fit in the coil.
As per sample.
01 No.
41 Rubber Bands As per sample. 30 Nos.
42 Rubber suckers Standard, 50 mm diameter.
As per sample.
02 Nos.
43 Rubber Cork Standard, armbed, size nos. 2, 3, 4, 5 and 6.
02 each
44 Thin rubber sheet 100 x 100 x 2 mm 01 No.
45 Magnetic Compass Metal case, polystrene transparent top, magnetized 01 No.
Page 12
needle with north marked red and south marked blue,
50 mm size.
As per sample.
46 Horse Shoe Magnet Arm length 50 mm, N and S poles to be marked.
alnico
01 No.
47 Bar Magnet Size 75 mm x 12 mm x 08 mm, red colour N and S
pole mentioned. alnico
02 No.
48 Cylindrical Magnet Diameter 16 mm and length 25 mm. Ferrite
01 No.
49 Ring Magnet Outer diameter 18 mm and thickness 3 mm. Ferrite
01 No.
50 Disc Magnet Diameter 35 mm and 8 mm thick. Ferrite
01 No.
51 Kerosene Burner 0.4 mm thick plated tin sheet container dia 75 x 55
mm height fitted with container lid locked with four
aluminium wick holder dia 6.3 x 42 mm height. Cover
with ebonite insulator and aluminium spacer to lock
the container lid and chimney holder inside dia 45 mm
x 5 mm height. MS sheet plated with centre 20 mm
dia seam hole attached with inner chimney dia 20 mm
inside x 56 mm height. Fitted with 0.4 mm thick
plated cap. Outer chimney dia 45 mm x 56 mm
height MS sheet 0.63 mm thick plated fitted with
chimney holder. Both chimney at crossing points
holes dia 1.5 distance 6.5 x 5.6 mm. Overall Burner
height 140 mm.
As per sample.
01 No.
52 Colour Disk
Thick ivory white card sheet of diameter 100 mm,
with seven colours sectors and pasted on generator
wheel.
(1st Sector) - 700 - Lemon Yellow No. 121
(2nd Sector) - 650 - Light Green No. 165
(3rd sector) - 450 - Turquoise Blue No. 163
(4th Sector) - 400 - Prussian Blue No. 149
(5th Sector) - 450 - Mauve No. 161
(6th Sector) - 500 - Orange No. 143
(7th Sector) - 450 - Poster Red No. 116
Total : 3600
As per sample.
01 No.
53 Aluminium Ruler cum Lever Anodized Aluminium Ruler 29 x 300 x 1.5 mm.
Marking in inch, cm and mm (smallest division 1/10"
and 01 mm respectively). Graduation printed in black.
With holes (diameter 2.5 mm) at 3 cm intervals.
As per sample.
01 No.
54 Plug Key One way plug key (Brass), base 80 mm x 55 mm.
01 No.
55 Copper Wire 100 cm long, thickness 24 SWG.
01 No.
56 Copper Strip 80 mm X5 mm x 1mm
01 No.
57 Zinc Strip 80mm X 5mm. x 1mm
01 No.
58 Magnesium Ribbon Roll Fine Quality role.
01 No.
59 Test tube holder Length 200 mm, to hold the test tubes upto 10 mm dia
and one for 20 mm dia boiling tube
01 each
Page 13
60 Rods with holder for conduction
of heat
Total length of holder 215 mm with plastic handle
at one end and brass pipe 50mm at another end
forming T shape. M.S rod & aluminiam rod shall be
200mm length. And Dia 6mm grooved on rod ten
equal segment.
As per sample.
01 Set
61 Tuning Fork Mild Steel Section 06 x 3.4 mm, prongs 110 mm
long, frequency 256 Hz.
As per sample.
01 No.
62 Slinky Steel Wire Spiral roll, outer dia 52 mm and close
size 68mm to 70mm.
As per sample.
01 No.
63 Deflagrating Spoon Diameter 12 mm, MS Sheet Katory welded with 02
mm dia MS wire. Overall height 165 mm, along
with cork (to fit into item no. 16) of bigger dia
24mm, smaller dia 18.5mm and length 26.5mm
01 No.
64 Periscope (Frame with mirror) Body hollow PVC pipe ID 60 mm, length 250 mm
half cut at the opposite ends to fit 50 mm plane
mirrors with rotable frame
As per sample.
01 No.
65 Scalpel Overall length 140 mm cutlery steel, blade
tempered (standard).
01 No.
66 Tongs pair Dia 05 mm, overall length 160 mm, chrome plated.
01 No.
67 Surgical Scissor 125 mm, one prong blunt and other pointed,
standard.
01 No.
68 Claw hammer with handle Forged, approximate weight 225 gm with wooden
handle.
01 No.
69 Steel Ball Steel Ball with a hook, diameter 20 mm.
01 No.
70 Steel Wire (Sitar String) Steel, length 100 cm, thickness 24 SWG.
01 No.
71 Banana clips with sockets Standard with two way connection.
Two red wire and two black.
As per sample.
02 Sets
72 Crocodile Clips Clips 50 mm, Plated, standard flexible wire 76, 50
cm long. each set two wire.
As per sample.
05 Sets
73 Stainless steel electrode with
cork
Rubber cork of axial length 25.5 mm, smaller face
dia 17mm, bigger face dia 25 mm,fitted to stainless
steel electrodes of length 70 mm and thickness 02
mm. Both electrodes have 90 degree bent of length
10 mm. (To fit into item No. 15 bell jar)
One set
74 Knife 100 mm X 1.5 mm, hardened steel, with wooden
handle.
As per sample.
01 No.
75 Screw driver 100 mm long, hardened, with plastic handle.
01 No.
76 Bottle opener with cork screw
and screw driver
Standard, overall length 140 mm, with cork.
01 No.
77 Shaving Blade Standard. 01 No.
78 Dissecting Needle Standard, length 110 mm, with plastic handle.
02 Nos.
Page 14
79 Iron filings Packed in 15 dia vial. 20 g
80 Iron Nails Length 38 mm, 15 SWG 10 Nos.
81 Iron Nails Length 25 mm, 15 SWG 10 Nos.
82 Emery paper Standard, 100 number.
01 No.
83 Sand paper Standard, 60 and 120 number.
01 each
84 Candle Size 200X15 mm. 02 Nos.
85 Filter Paper Ordinary. Circular of dia 100 mm
10 Nos.
86 Plastic Strip Plastic strip 200 x 25 x 3mm and one side pasted
woolen cloth 100 x 25mm.
As per sample
01 No.
87 Silk cloth Size 200X200mm.
01 No.
88 Woolen Cloth Size 200X200mm, dark colour.
01 No.
89 Thermocole sheet Size 100X100X25 mm.
01 No.
90 1 c.c. spoon Specification :
HDPE, white, 1cm cubic and overall length 100
mm
02 Nos.
91 Spring balance A.B.S , open type, capacity 250 g graduation in
steps of 10 g on one side and Newton’s on the other
side
92 Decimeter cube vessel Transparent polystyrene. Inside dimension 100 x
100 x 100 mm top open, 9 lines at 1 cm distance on
one side 100 equal 1 cm square on the other
01 No.
93 Laboratory Stand
1) Boss head
2) Clamp
MS rod dia 10 mm x 375 mm long, MS base, CI
Boss head and aluminium clamp
As per sample
01 each
94 Sun dial Plastic base dia, 100-110 mm x 3 mm with
graduation
as per sample
01 set
95 Pulley with frame & Rod Plastic pulley dia, 50 mm attached with frame
75mm x 17 mm of MS 24 SWG and L type rod of
dia 6mm, overall length 115mm bent at 15 mm at
90 degree.
As per sample
02 Nos
96 Aluminium wire and pointer Aluminium wire 3 mm dia x 45 cm length
and pointer
As per sample
01 set
97 Bimetallic strip Frame – MS Rod, 6 mm dia, with MS and brass
strips joined, as per sample
01 No.
98 Set of four resistors 5 ohm, 10
ohm (2 Nos.) 20 ohm
15 mm x 15 mm x 125 mm with nicrohme wire
resistance, embedded in plastic case
As per sample
01 set
99 Circuit Board Complete with plastic base, battery holder,
bulb holder with bulb 3.2 V, switch, banana sockets
As per sample
01 set
100 Measuring cylinder Plastic, transparent with built in base, 100 mL
graduation (min 1 mL), as per sample
01 No.
101 Plastic Boxes Assorted sizes for packing – 4 Boxes 2 sets
102 Urea Packed in HDPE vial of size 55 mm x 15 mm
10 g
103 Yeast Powder -do- 10 g
Page 15
104 Calcium Oxide -do- 10 g
105 Copper Sulphate - do - 10 g
106 Sodium Hydroxide
- do - 10 g
107 Methylene Blue Solution Packed in LDPE Dispensing bottle of 15 mL
10 mL
108 Universal Indicator solution -do- 10 mL
109 Phenolphthlein -do-
10 g
110 Potassium Permanganate - do - 10 g
111 Baking soda - do - 10 g
112 Sodium Chloride - do - 10 g
113 Litmus paper Red and Blue colour
01 strip each
114 Plastic Funnel Plastic, transparent top dia, 50 mm
01 No.
115 Micro Test Tube 4 mL Borosilicate glass, diameter 10 x 45 mm height
with rim,
10 No.
116 W Tube Borosilicate glass, 2 mm thick x 8 mm dia having
length of arm 70-75 mm with wide mouth in one
arm
As per sample
05 No..
117 China Dish Outer diameter 70mm / 75 mm.
As per sample
01 No.
118 Micro Spatula Stainless steel 100mm length.
As per sample
01 No.
119 Forcep Stainless steel 100 mm long pointed
02 No.
120 Micro Test Tube Brush Soft hairs for 4mL test tube cleaning.
01 No.
121 Tripod
Aluminium top 63 mm dia x 15 mm thick three
blind hole dia 10 x 10 mm depth to hold test tube.
Attach with three legs 4 mm dia x 165 mm and total
length 180mm.
As per sample
01 No.
122 Pasteur Pippette Low density poly ethylene (LDPE) capacity 3 ml
with screw type and nozzle.
10 No.
123 Dispensing Bottle Low Density Poly Ethylene (LDPE) capacity 15 ml
(in packs of 18 No.
124 Plastic Vials High Density Poly Ethylene (HDPE), height 55
mm, diameter 15 mm.
12 No.
125 Micro Test Tube Rack Perspex sheet size 100 mm X 27 mm X 12 mm. 04
holes to hold Micro Test Tubes.04 mL.
2 No.
126 Rubber Balloons 5 small and 5 big (in a packs of 10)
01 packet
127 Cotton Thread Reel in white color .
As per sample.
01 No.
128 Wash Bottle LDPE, capacity 125 mL.
01 No.
129 Petri dish Soda glass dish outer dia. 90mm X 15mm depth
01 No
Page 16
130 Beaker (50mL) Borosilicate glass, capacity 50 mL, height 56 mm,
diameter 42 mm. with rim
01 No.
131 Watch glass Soda glass, diameter 50 mm.
01 No.
132 Mirror/Lens stand Wooden / Plastic mirror stand 120mm X 30mm X
75 mm. Height with slot.
As per sample.
01 No.
Page 17
ANNEXURE-2
Secondary Science Kit
Technical Specification
S.No Item Names Specification Quantity
1. Kit Box with carton 6 ply
Main Body of 24 SWG and doors and partitions of 26
SWG M.S. Sheet. Doors will be fitted 15 mm above the
ground level with main body. Right hand door should
have two racks with 2 sizes of holes to accommodate 47
containers/vails. The rack partition should have guides
(as per sample) for free movement. Rack size 220mm x
100mm x 15mm. M.S. Sheet 24SWG. 1st rack should
have 18 holes dia 26 mm and 2nd rack to have 29 holes
(dia. 15 mm 20 holes. And dia 26mm 9 holes) Inside
painted Light Grey. Main body and doors may be of
different matching colours. The doors should have
suitable piano hinges duly spot welded/riveted etc. with
main body. Provision for locking system (as per sample)
& two folding type handle 4mm dia for carrying box.
Provision for supporting rest for hanging doors to be
made as per sample. allover size 460 x 450 x 310mm.
As per sample and drawing.
1
2. Spring balance A.B.S, open type, capacity 250 g graduation in steps of
10 g on one side and Newton’s on the other side
As per sample.
1
3. Magnetic Compass Metal case, polystrene transparent top, magnetized
needle with north marked red and south marked blue, 50
mm size.
As per sample.
1
4. Set of four resistors 10 ohm (1
no), 20 ohm (2 no’s.), 30 ohm
(1 no)
15 mm x 15 mm x 125 mm with nicrohme wire
resistance, embedded in plastic case with terminal.
As per sample
4
5. Full Protractor Transparent plastic dia 120 mm, thickness 2 mm.
Double angle marking 0-3600
1
6. Graduated Syringe Standard, plastic, capacity 10 mL.
1
7. Compound Microscope ISI Marked Microscope: Metal Body, overall height
approx. 320 mm, base 125 mm x 200 mm. Achromatic
good quality lenses.
Two Objectives : 10x & 45x. Two Eyepieces : 10x &
15x having coarse fine motion & fixed condenser.
As per sample.
1
8. Dissecting Microscope Plastic body 70mm X 95mmX 90mm height
Top fitted glass sheet, two lenses, fitted with plastic
frame in the backside
As per sample.
1
9. Tuning Fork Mild Steel Section 06 x 3.4 mm, prongs 110 mm long,
frequency 256 Hz.
1
10. Measuring cylinder Plastic, transparent with built in base, 100 mL graduation
(min 1 mL), 1
11. Pasteur Pipette Low Density Poly Ethylene (LDPE), capacity 03 mL. 4
12. Syringe Pump Poly carbonate syringe pump over all size with piston
200mm. length and outer Dia. 30mm.
As per sample.
1
13. Horse Shoe Magnet Arm length 50 mm, N and S poles to be marked. alnico
1
Page 18
14. Bar Magnet Size 75 mm x 12 mm x 8 mm, red colour N and S pole
mentioned. alnico 1
15. Cylindrical Magnet Diameter 16 mm and length 25 mm. ferrite
1
16. Ring Magnet Outer diameter 18 mm and thickness 3 mm. ferrite
1
17. Disc Magnet Diameter 36 mm and 8 mm thick. ferrite
1
18. Slinky Steel Wire Spiral roll, outer dia 52 mm and close size 68
mm to 70 mm.
1
19. Circuit Board Complete with plastic base,190mm x 120mm x15mm.
battery holder, bulb holder with bulb 3.2 V, switch,
banana sockets.
As per sample
1
20. Kerosene Burner 0.4 mm thick plated tin sheet container dia 75 x 55 mm
height fitted with container lid locked with four
aluminium wick holder dia 6.3 x 42 mm height. Cover
with ebonite insulator and aluminium spacer to lock the
container lid and chimney holder inside dia 45 mm x 5
mm height. MS sheet plated with centre 20 mm dia seam
hole attached with inner chimney dia 20 mm inside x 56
mm height. Fitted with 0.4 mm thick plated cap. Outer
chimney dia 45 mm x 56 mm height MS sheet 0.63 mm
thick plated fitted with chimney holder. Both chimney at
crossing points holes dia 1.5 distance 6.5 x 5.6 mm.
Overall Burner height 140 mm.
As per sample.
1
21. Tripod Aluminium top 63 mm dia x 15 mm thick three blind
hole dia 10 x 10 mm depth to hold test tube. Attach with
three legs 4 mm dia x 165 mm and total length 180mm.
As per sample
1
22. Laboratory Stand
1) Boss head
2) Clamp
3) G clamp
Specifications :
MS rod dia 10 mm x 375 mm long, MS base, CI Boss
head, G clamp and aluminium clamp
As per sample
1each
23. Plastic Funnel Plastic, transparent top dia,90 mm. x overall length140
mm.
1
24. Stainless steel electrode with
cork
Dia 2mm. x 80mm stainless steel electrode fitted with
cork to sapret. Cork size top dia 25mm. x dia 17 taper x
25mm. length, ( to fit with item No. 81 bell jar)
As per sample
1each
25. B.P and M.P Apparatus Alumunium. 63 mm diameter x 55 mm height, 02 holes
and split fitted with handle : mild steel rod 06 mm
diameter x 130 mm length
As per sample
1
26. Test Tube Stand Perspex sheet size 100 mm X 27 mm X 12 mm. 04 holes
to hold Micro Test Tubes.
As per sample.
4
27. Trolley 4mm corgeted sheet 60mm X 120mm fixed with same
size steel sheet attach with four wheel dia. 30 mm.
As per sample.
2
28. China Dish Outer diameter 70mm / 75mm.
1
29. Wash Bottle LDPE, capacity 125 mL. good quality
As per sample. 1
30. Rubber Bands As per sample. Assorted size 10
31. Rubber Balloons 5 bigger size and 5 smaller size. Assorted size
As per sample
10
32. Calorimeter Borosilicate glass, 50 mL capacity, beaker fitted in Low 1
Page 19
Density Poly Ethylene (LDPE) foam sheet.
As per sample.
33. Forceps Stainless steel, length 100 mm. 1
34. Rubber cork Standard, armbed, size nos. 2, 3, 4, 5 and 6. 2 each
35. Cell holder For two R-6 cells, brass-copper terminals [plated],
plastic body,130mm X 70mm x 40mm height with cover
As per sample.
1
36. Test Tube Brush Soft hairs
As per sample.
1
37. Test tube holder Wooden handle, Length 200 mm, to hold the test tubes
upto 10 mm dia, plated.
1
38. Plane mirror strip Good quality, 150 X 30 X 2 mm.
3
39. Copper strip 80mm. X 5mm. x 1mm.
4
40. Zinc strip 80mm. X 5mm. x 1mm.
4
41. Iron strip 80mm. X 5mm. x 1mm.
4
42. Sand paper Standard, 60 and 120 number.
1 each
43. Connecting wire with Banana
plug
Soft electric wire 200 mm. length both end fitted with
banana plug.
Two red and two black.
4 Nos.
44. Transparent stiff plastic tube Dia. 6 mm X 500 mm length
As per sample.
1
45. Droppers Borosilicate glass, (i)length 100 mm, capillary length 50
mm, diameter 06 mm
2
46. Copper wire bent in u form Dia. 1mm. copper wire U band 30mm. x 35 mm height
and both corner band 6mm. in 90o .
As per sample.
1
47. Constantan wire 26 SWG 50cm Approx length
1
48. Copper wire 100 cm long, thickness 24 SWG 1
49. Nichrome wire 26 SWG 50cm Approx length
1
50. Transparent PVC plastic tube
with stoppers
Dia 20 mm, thickness 02 mm, 50 Cm long, with stoppers
at both ends.
As per sample.
1
51. Filter Paper Ordinary. Circular of dia 100 mm
As per sample.
10 no’s
52. Circular coil Wooden / Plastic circular case Dia. 150mm inner dia
100mm with four terminal covering with copper
enameled wire 26 SWG.
0-100-200-500 turns.
As per sample.
1
53. Steel Ball Steel Ball with a hook, diameter 20 mm.
1
54. Pith / Plastic Ball Dia 12 mm. solid center through out hole 1.5mm.
1
55. Yo Yo X shape plastic wheel Dia. 120mm X 40mm fitted with
1.5metre nylon thread.
As per sample.
1
56. Mirror/Lens stand Wooden mirror stand 120mm X 30mm X 75 mm. Height
with slot.
As per sample.
1
57. Micro Spatula Stainless steel. 100mm. approx length
As per sample.
1
Page 20
58. Ice Cream Spoon Good quality Wooden.
As per Sample
1
59. Plug Key One way plug key (Brass), base 80 mm x 55 mm.
As per sample.
1
60. Micro Test Plate/Well plate Polystyrene (PS), with 96 wells. As per sample. 1
61. Blotting paper 100 mm x 100 mm. 10
62. Iron Nails Length 38 mm, 15 SWG 10 Nos.
63. Dispensing Bottle Low Density Poly Ethylene (LDPE), Capacity 15 mL,
with screw type cap and nozzle.
As per sample.
30
64. Vials High Density Poly Ethylene (HDPE), height 55 mm,
diameter 15 mm. 20
65. Crocodile Clips Clips 50 mm, Plated, standard flexible wire 76, 50 cm
long.
Each set two wire five colour.
5 sets
66. Multimeter Pocket size, digital, high impedence.
As per sample. 1
67. Pair of Tongs Dia 05 mm, overall length 160 mm, chrome plated.
1
68. Surgical Scissor 125 mm, one prong blunt and other pointed, standard.
1
69. Screw driver 100 mm long, hardened, with plastic handle.
1
70. Dissecting Needle Standard, length 120 mm, with plastic handle.
2
71. Claw hammer with handle Forged, approximate weight 225 gm with wooden
handle.
1
72. Capillary Tube Soda glass. Dia 1.5 mm x 100mm.
1 box
73. Micro Test Tube 4 mL Borosilicate glass, diameter 10 x 45 mm height with rim,
as per sample
16
74. Magnifying Glass Optical glass, focal length 120 mm, with plastic handle.
1
75. Beaker (50mL) Borosilicate glass, capacity 50 mL, height 56 mm,
diameter 42 mm. with rim
1
76. Beaker(10mL) Borosilicate glass, capacity 10 mL, height 30 mm,
diameter 20 mm. with rim.
4
77.
Permanent slide
Hydra, Amoeba, Paramecium, Striated muscles ,
Nerve cell, Spirogyra
(Packed in plastic box)
One each
78. Plastic Petri dish Plastic dish outer dia. 120mm X 30mm depth
As per sample.
1
79. Cover Slips Thickness 0.2 mm – 0.3 mm approx. square glass pieces.
20
80. Glass Rod Length 150 mm, dia 07 mm.
1
81. Bell Jar Borosilicate 3.5 mm thick glass, neck inside dia 18 mm x
20 mm height. Overall length 90 mm x inside dia 55 mm
with rim diameter 64 mm.
As per sample.
1
82. Double mouthed flask Borosilicate. Thickness 1.5 mm with one mouth dia 25
mm x 25 mm height (with rim) and other dia 06 mm x 28
mm length. Bulb outer dia 48 mm with overall length
110 mm.
As per sample.
1
Page 21
83. Glass tube Glass tube dia 6mm. x 150 mm.
1
84. Glazed Glass plate Glass plate size 100 mm x 100 mm x 2.5 mm.
1
85. W-tube Borosilicate glass, 2 mm thick x 8 mm dia having length
of arm 70-75 mm with wide mouth in one arm.
As per sample
4
86. Watch glass Soda glass, diameter 50 mm.
1
87. Stirrer Soda glass with circular flat end, length 100 mm. Glass
rod dia 4 mm.
1
88. Measuring Flask 25mL.As per sample. 1
89. Round Bottom Flask Borosilicate glass, capacity 35 mL,
As per sample.
1
90. Ignition Tube As per sample. 10
91. Blade Saving blade. 1
92. Double Concave Lenses Glass, Focal length 20 cm and dia 50 mm.
1
93. Double Convex lens Glass, Focal length 20 cm and dia 50 mm.
1
94. Concave Mirror Glass, Focal Length 20 cm, dia 5 cm.
1
95. Convex Mirror Glass, Focal Length 20 cm, dia 5 cm.
1
96. Plane mirror 2 mm X 50 mm Dia. Round edges.
1
97. Square Glass Slab Square glass slab, size 50 mm x 50 mm x 12 mm thick.
1
98. Triangular Glass Prism Glass Prism 25 mm equilateral triangle and height 28
mm.
1
99. Laboratory
Thermometer
Glass, alcohol filled, -10º C to 110º C, graduation 1º C
with card board/plastic cover and cotton at both ends.
1
100 pH Paper pH 1-11, paper box containing, 10 booklets
As per sample
10 booklets
101 Metals Aluminum Strips , dimension 80 mm x 5 mm, x1mm.
As per sample
04 Nos.
102 Iron Filings Packed in vial. 10g
103 Litmus Paper Red and Blue colours 1each booklets
104 Plastic Boxes Appropriate size to keep all glass items. 2 Nos.
105 Conical flask Capacity 25 ml borosilicate glass 1 No.
106 Boiling Tube with cork Borosilicate glass 90 mm x 20 mm dia with cork. 2 Nos.
Page 22
ANNEXURE-3
Sr. Secondary Microscale Chemistry Laboratory Kit
Technical Specification
S.No Item Name Specification Quantity 1 Wooden Box
with Revolving
Top packed in 8-
ply cardboard
carton
Wooden Box of Medium Density Wood Fibre (MDF)
material, Grade II (Red Colour), with bonded rubber
wood, thickness 11 to 12 mm : Box size Door side 13",
Height 12", Rest sides 14", two inside partitions, two
doors with 02 pockets, magnetic locking of two doors,
two sides open, painted bottle green.
Revolving Top : height 90 mm, two steps square top
painted white with ball bearing system having 30 holes
of diameter 25 mm for keeping 15 mL bottles and 20
holes of diameter 16 mm for keeping vials. As per
sample.
01 No.
2 Micro Beaker Borosilicate glass, capacity 10 mL, height 34 mm
diametre 25 mm.
12 Nos.
3 Beaker(50 mL) Borosilicate glass, capacity 50 mL, height 56 mm,
diameter 42 mm. with Graduation.
03 Nos.
4 Micro Filtration
Unit
Borosilicate glass, Boiling Tube : height 80 mm,
diameter 20 mm, having side tube for fitting rubber
bulb, Small rubber bulb, rubber cork to fit on the
boiling tube, Hirsch funnel - 01 number.
As per sample.
02 Nos.
5 Micro Test Tube Borosilicate glass, height 45 mm, diameter 10 mm. with
rim.
24 Nos.
6 Micro Titration
Flask
Borosilicate glass, height 50 mm, capacity 25 mL.
As per sample.
04 Nos.
7 W -Tube Borosilicate glass, 2 mm thick x 8 mm dia having
length of arms 70-75 mm, with wide mouth in one arm.
As per sample.
10 Nos.
8 Round Bottom
Flask
Borosilicate glass, capacity 35 mL, short neck with
rubber cork. As per sample.
02 No.
9 Stirrer Soda glass with circular flat end, length 100 mm x 4
mm dia.
As per sample.
02 Nos.
10 Droppers fitted
with (i)02 mL
Syringe (ii)and
micro Bulb
Borosilicate glass, (i)length 100 mm, capillary length
50 mm, diameter 06 mm,(ii) length 50 mm, capillary
length 25mm, diameter 06mm
As per samples.
03 each
11 Chromatograp-
hic Jar with Cork
Soda glass, height 175 mm, diameter 30 mm.
As per sample.
01 No.
12 Micro Burettes
Packed in 6-ply
Borosilicate glass, capacity 05 mL, rotating
screw type flow stop cock with Poly Tetra
04 Nos.
Page 23
cardboard carton
containing four
burettes
Fluoro Ethylene (PTFE) key and cup, sub
division 0.02 mm, fitted with micro tip
(capacity 2-200 micro litre). As per sample.
13 Glass Rod Soda glass, length 100 mm, diameter 4 mm.
02 Nos.
14 Alcoholic
Thermometer
Glass, alcohol filled, graduation 0 - 60° C, sub division
0.1° C.
01 No.
15 Mercury
Thermometer
Glass, mercury filled, graduation 0 - 250° C, sub
division 1.0° C. As per sample.
01 No.
16 Dispensing
Bottle
Low Density Poly Ethylene (LDPE), Capacity 15 mL,
with screw type cap and nozzle.
As per sample.
30 Nos.
17 Pasteur Pipette Low Density Poly Ethylene (LDPE), capacity 03 mL. 20 Nos.
18 Micro Test
Plate/Well plate
Polystyrene (PS), with 96 wells. 04 Nos.
19 Wash Bottle LDPE, capacity 125 mL. 02 Nos.
20 Volumetric Flask Borosilicate glass, with inter changeable stopper,
capacity 25 mL. As per sample.
02 Nos.
21 Petri Dish Soda glass, without cover, diameter 96 mm.
02 Nos.
22 Capillary Tube Soda glass. 01 Box
23 Watch Glass
(Small)
Soda glass, diameter 50 mm. 02 Nos.
24 Micro Funnel Soda Glass, diameter 32 mm. x overall size 80mm. 02 Nos.
25 Fusion Tube Soda glass, diameter 05 mm, length 40 mm.
20 Nos.
26 China Dish Diameter 85 mm. As per sample. 02 Nos.
27 Micro Measuring
Cylinder
High Density Poly Ethylene (HDPE), capacity 10 mL. 02 Nos.
28 Vials High Density Poly Ethylene (HDPE), height 55 mm,
diameter 15 mm.
20 Nos.
29 Multimeter Pocket size, digital, high impedance.
As per sample.
01 No.
30 Micro Spatula Stainless steel. Allover length 100mm. 02 Nos.
31 Forecep Stainless steel, length 100 mm.
02 Nos.
32 Micro Test Tube
Brush
Soft hairs for cleaning 4mL test tube.
02 Nos.
33 Circular
Whatman Paper
Diameter 125 mm. good qualities.
20 Nos.
34 pH Paper (01
Paper Box
containing 10
booklets)
Universal indicator. As per sample. 01 Paper
Box
35 Micro Test Tube
Holder
Wooden handle for hold the 10mm test tube.
02 Nos.
36 Calorimeter with
50 mL capacity
Beaker
Borosilicate glass, 50 mL capacity, beaker fitted in Low
Density Poly Ethylene (LDPE) foam sheet. As per
sample.
01 No.
Page 24
37 Tripod Aluminium top 63 mm dia x 15 mm thick three blind
hole dia 10 x 10 mm depth to hold test tube. Attach
with three legs 4 mm dia x 165 mm and total length
180mm. As per sample.
02 No.
38 Heating Block Alumunium, 63 mm diameter X 55 mm height, 02 holes
dia 6mm x 30 mm deep, and split fitted with handle :
Mild Steel Rod 06 mm diameter X 130 mm length. One
0.5mm deep cut on face for capillary tube.
As per sample.
01 No.
39 Two - Way
Burette Clamp
and Stand
For Base : Mild Steel Sheet 140 mm X 160 mm X 16
SWG. For Stand : Mild Steel Rod 06 mm diameter, 280
mm length. Mild Steel Nut 06 mm, Fly Nut 06 mm, 06
mm Washer. Spring Steel Strip 80 mm X 08 mm X 20
SWG to hold 02 burettes.
As per sample.
02 Nos.
40 Electrodes
Copper
Copper strip, length 80 mm, width 5 mm. x thickness 1
mm.
01 No.
41 Electrodes Zinc Zinc strip, length 80 mm width 5 mm x thickness 1
mm.
01 No.
42 Micro Test Tube
Rack
Perspex sheet size 100 mm X 27 mm X 12 mm 04 blind
holes -------to hold Micro Test Tubes.
As per sample.
02 Nos.
43 Kerosene Burner 0.4 mm thick plated tin sheet container dia 75 x 55 mm
height fitted with container lid locked with four
aluminium wick holder dia 6.3 x 42 mm height. Cover
with ebonite insulator and aluminium spacer to lock the
container lid and chimney holder inside dia 45 mm x 5
mm height. MS sheet plated with centre 20 mm dia
seam hole attached with inner chimney dia 20 mm
inside x 56 mm height. Fitted with 0.4 mm thick plated
cap. Outer chimney dia 45 mm x 56 mm height MS
sheet 0.63 mm thick plated fitted with chimney holder.
Both chimney at crossing points holes dia 1.5 distance
6.5 x 5.6 mm. Overall Burner
As per sample
02
Page 25
ANNEXURE-4
Solid State Model Kit
Technical Specification
S
no.
Name of
Items
Specification Quantity
1 Kit box Polypropylene transparent milky White box overall Size
260mm. x 170mm. x 70mm. height with cover
As per sample
01
2 plastic
molded
platform
ABS. square platform 100mm. x 100mm. x 20mm. height on
the top (A) side of the platform holes dia 1.8 mm. are made
at the vertices and center are square . and bottom (B) side dia
1.8mm holes are drilled are vertices and center of regular
hexagons. Milky white colour.
As per sample
01
3 Dowels Stainless steel rod dia 2mm. x 130mm. length
13
4 PVC.
Balls (Big
size)
PVC. Hollow balls dia 35 mm. with hole centre to centre dia
1.8 mm. in a orange colour.
As per sample
24
5 PVC.
Balls
(small
size)
PVC. Hollow balls dia 25 mm. with hole centre to centre dia
1.8 mm. in a white colour.
As per sample
24
Page 26
ANNEXURE-5
Molecular Model Kit
Technical Specification
S
no.
Name of
Items
Specification Quantity
As perKit
1
Kit Box
Polypropylene transparent milky White box, Overall Size
195mm x 125mm 40mm height with cover. Six pockets inside.
First left hand side 40 x 122mm and one pocket top 150 x
40mm four pocket 35 x 85mm. on bottom sweet multipurpose
storage base No. 3
As per sample
1
2
One- prong
atom
Polypropylene atom dia 8mm with prong dia 4mm. x 10mm.
length in five colures white, green, black, sky blue and red.
As per sample
25 White
10 Green
10 Black
10 Blue
10 red
3 Two- prong
atom
(A) linear
Polypropylene atom dia 8mm. with both side prongs dia
4mm. x 10mm. length. With total length 28mm. single bond
at an angle 180 degree.
As per Sample
02 Brown
(B) Bent Polypropylene atom dia 8mm. with two prong dia 4mm. x
10mm. with 109.50 both side length is 18 mm. two colours
Red and Yellow.
As per sample
10 red
10 Yellow
4 Four- prong
atom
Polypropylene atom dia 8mm. with four prong dia 4mm. x
10mm.each prong making an angle of 109.50 with one-
another. Three colours Black, Blue and Red.
As per sample.
25 Black
06 Blue
06 red
5. Five- prong
atom
Polypropylene atom dia 8mm. with five prong dia 4mm. x
10mm . two prong linking with atom 1800 and three prong
1200 perpendicular to atom in a two colour black and brown .
As per sample
30 Black
05 Brown/
Black/
Red
6. Six- prong
atom
Polypropylene atom dia 8mm. with six prong dia 4mm. x
10mm .all six prong across with atom with 900 in a three
colours black, Brown and green .
As per sample.
05 Black
!5 Brown/
Orange
15 Green
7. Orbital lobes Polypropylene orbital lobes all length 20mm. balloon type one
side dia 16mm. and anther side 12mm. with dia 3.9 mm. hole
depth 10mm. and sky blue colour.
As per sample
10 Light
Blue
8. Linkers LDPE. Pipe outer dia 4.5 mm. colour is milky white . in three
sizes
(A) Inner dia 3.9mm. x 25mm. length .
(B) Inner dia 3.9mm. x 40mm. .length.
(C) Inner dia 3.9mm. x 50mm. .length
60 Small
08 Medium
12 Large
9. Sleeve PVC. Soft pipe overall length 100mm. x 3.9mm.inner dia of
the sleeve and colour blue.
As per sample
12 Sleeves
Page 27
ANNEXURE-6
Upper Primary Mathematics Kit
Technical Specification
S.No Item Name Specification Quantity
per Kit
1 Plastic Strip
(Type I)
Transparent Perspex 262 x 20 x 2.7 mm to
3 mm, having 3 holes of dia 5 mm at a
distance of 50 mm, 120 mm and 190 mm
from one end.
4 slots 125 x 5 mm with both ends
rounded to semi-circle.
Location of slots:
1st slot : 0-25 mm, 2
nd slot : 70-95 mm
3rd
slot: 140-165 mm, 4th slot: 210-235
mm
As per sample
Qty : 04
Nos.
2 Plastic Strip
(Type II)
Transparent plastic 262 x 20 x 2.7mm to 3
mm, having 2 holes of dia 5 mm at a
distance of 50 mm and 120 mm from one
end.
3 slots 125 x 5 mm with both ends
rounded to semi-circle.
Location of slots:
1st slot : 0-25 mm
2nd
slot : 70-95 mm
3rd
slot : 140-235 mm
As per sample
Qty : 02
Nos.
3 Half Protractor
Transparent plastic dia 90 mm, thickness
2 mm. Double angle marking 0-1800
With center hole dia 4mm. on base line.
As per sample
Qty : 04
Nos.
4 Full Protractor Transparent plastic dia 120 mm, thickness
2 mm. Double angle marking 0-3600
With center hole dia 4mm. on center
point.
As per sample
Qty : 03
Nos.
5 Fly nut and Screw
Mild steel, chromium plated, length 15
mm, metric thread (M4), round head or
HDPE moulded. With fly nut.
As per sample
Qty : 12
Sets
6 Geo-board
ABS material, 190 x 190 x 10 mm. One
face has grids of 10 mm square with 2 mm
dia holes at all corners of squares.
Boundary corners of grid squares are
without holes.
As per sample
Qty : 01
No.
Page 28
7 Dowels
Stainless steel, length 18 mm and dia 2
mm. with remove sharp edges.
As per sample
Qty : 25
Nos.
8 Rubber bands
Standard item assorted size Qty : 10
Nos.
9 Paper nets for solid
geometrical shapes
a) Cube
b) Cuboid
c) Cone
d) Cylinder
e) Prism
f) Pyramid (with
triangular base)
g) Pyramid with square
base
As per sample
350 GSM paper, UV / coated
60 x 60 x 60 mm cube
As per sample
65 x 65 x 40 mm cuboid
As per sample
Cone with slant height of 120 mm and
circular based dia of 80 mm.
As per sample
Height : 130 mm and circular base dia 60
mm. As per sample
Height 100 mm, equilateral triangle sides
of 55 mm
As per sample
4 equilateral triangles with sides 93 mm
As per sample
Square base sides 70 mm, equilateral
triangle sides 70 mm.
All the shapes plastic coated both side.
As per sample
One each
Qty : 01
No.
Qty : 01
No.
Qty : 01
No.
Qty : 01
No.
Qty : 01
No.
Qty : 01
No.
Qty : 01
No.
10 Cut outs of
a) Parallelogram
Plastic corrugated sheet 3 mm thick blue
colour. Length 120 mm, width 85 mm,
one angle 750
Labeling with black colour.
As per sample
Qty : 01
No.
b) Triangle cut from
Parallelogram
As per sample
Qty : 01
No.
c) Trapezium and triangle
to form the Parallelogram
As per sample
Qty : 01
No.
d) Two congruent triangle
As per sample
Qty : 01
No.
e) Parallelogram showing
triangles on it. Triangles
A and C fitting on triangle
As per sample
Qty : 01
No.
Page 29
B
f) Two congruent
parallelogram
As per sample
As per sample
Qty : 01
No.
11 Circle
a) Four equal parts of a
circle, 2 marked with A
Blue colour Plastic corrugated sheet
3 mm thickness dia 160 mm.
As per sample
Qty : 01
No.
b)Six equal parts of a
circle, 3 mark with A
As per sample
Qty : 01
No.
c) Eight equal parts of a
circle, 4 marked with C
As per sample
Qty : 01
No.
d) 12 equal parts of a
circle, 6 marked with D
As per sample
Qty : 01
No.
e) 16 equal parts of a
circle, 8 marked with E
As per sample
Qty : 01
No.
f) 2 equal parts of a circle
As per samplE Qty : 01
No.
g) 3 equal parts of a circle
As per sample,
As per sample
Qty : 01
No.
12 Plastic Cubes
ABS plastic cube with sides 20 mm
accurate size, 5 mm to 8mm dia holes
with depth of 5 mm on five faces. Sixth
face will have a peg to push fit into the
holes.
As per sample
Qty : 64
Nos.
13 Counters
Plastic, dia 20mm (whose one side is
blue and other side is red)
As per sample
Qty : 20
Nos.
14 Counters of different
colours
Plastic 20 mm dia x 2 mm thickness.
different 4 colours two each colours.
As per sample
Qty : 08
Nos
15 Abacus
a) Abacus stand
Plastic base 120 x 30 x 15 mm with as per
dowell dia push fitted in holes.
7.5 mm deep 5 holes. Marking as per
sample.
As per sample
Qty : 01
No.
b) Aluminium Dowels
Dia 6 x 110 mm.
As per sample
6 Qty:
c) Beads of one bright
colour
As per sample
Qty : 50
Nos.
16 A pack of cards numbered
from 1 to 100
Plastic coated both side
As per sample
Qty : 01
No.
17 Board showing numbers
+104 to -104
A4 size x 2 , Plastic coated both side
As per sample
Qty : 01
No.
Page 30
18 Dice 1 to 6 Blue and Red
Cube 18/20 mm. side edges rounded
As per sample
Qty : 02
aech
19 Plastic box 140 x 90 x 40mm.
Qty : 01
No.
20 Kit Box along with carton 12mm.ply box outer size 425 mm. x 300
mm. x 115 mm. heights with flap. Two
part should have suitable hinges and
locking system as per sample. Inside of
the box and flap have pockets potting the
kit items as per sample. the front side of
the box in centre folding type handle as
per sample. Painted with teak colour
inside and outside.
Carton packing and placing of kit box
ready for transport.
As per sample
One each
21
Page 31
ANNEXURE-7
Secondary Mathematics Lab Kit
Technical Specification
S.No Item Name Figure/stapes Specification No.
Off
1
Plastic Strip
(A Type)
Transparent Perspex 264 x 20
x 2.7 mm to 3 mm having 3
slots of width 5 mm. at a
distance of 0 to 30 mm. next
50 to200 mm. and again 220
to 250mm. numbering on 0 to
25Cm.with mm. both side, all
marking and numbering with
center line in black colours.
As per sample
08
2
Plastic Strip
(B Type)
Transparent Perspex 264 x 20
x 2.7 mm to 3 mm having 3
slots of width 5 mm. at a
distance of 0 to 0.3 mm. next
to 0.5 to 2.0 and again 2.2 to
2.5 all marking and numbering
with center line in black
colours.
As per sample
03
3
Full Protractor
(360o)
Transparent plastic dia 120
mm, thickness 2 mm. Double
angle marking 0-3600
with centre hole 4 mm on
centre point.
As per sample
04
4
Half Protractor
(180o)
Transparent plastic dia 90 mm,
thickness 2 mm. Double angle
marking 0-1800 with centre
hole 4 mm on base line.
As per sample
04
5
Fly nut and Screw
Mild steel, chromium plated.
length 15 mm, metric thread
(M4), round head or HDPE
molded with fly nuts.
As per sample
15 Sets
6
Geo-board
ABS material, 190 x 190 x 10
mm. One face has grids of 10
mm square with 2 mm dia
01
Page 32
holes at all corners of squares.
Boundary corners of grid
squares are without holes.
As per sample
7
Geo-board Dowels
Stainless steel, length 18 mm
and dia 2 mm
As per sample
10
8
Rubber bands
Small multicolours rubber
band. Standard item.
As per sample
20
9
CUTOUTS :
a) Triangle
trapezium
b) Two congruent
triangle
c) A parallelogram
and 3 cutouts of a
triangle
d) Pieces of a
trapezium
B A
BA C
T1T2
A B
Plastic corrugated sheet 3 mm.
thick blue colour length 120
mm width 85 mm one angel
75 degree labeling with black
colour.
As per sample
01 set
each
10
PYTHAGORAS
THEOREM
Square with
5 Cut Outs
SQUARE
125 x 125
100x10075x75
i)Four plastic cutouts for
Pythagoras theorem 125mm
square. 100mm square and
75mm. square with same size
triangle.
01 set
each
Page 33
SQUARE
12
4
5
3
12
53
4
ii) Plastic Sheet 125mm.
square x 3mm. thick sheet and
same size other sheet and
cutout to 5 pieces. Cutting and
marking as per figure.
As per sample
Note-Sheet thickness 3mm &
colour may be uniform for
all tiles.
11
Algebraic Identities
Plastic sheet 76 mm. square
with another three pieces
cutouts. One is 38mm. square
and two pieces are same size
38mm. x 76mm. in cut of 450
up to 38mm.
ii) Plastic sheet in the four
pieces two square 80mm. and
45mm. and another two
rectangular 80mm. x 45mm.
Note-Sheet thickness 3mm &
colour may be uniform for
all tiles.
01 set
each
12
ALGEBRAIC
TILES
a) x2 , x , 1
b) –x2 , -x , -1
X 2
- x
-1
-x 2
X 2 x 1
(1) (2) (3)
All tiles in three sizes. Mead
in Plastic sheets
1) x2 and –x
2 in same size,
50mm. x 50mm. 5tiles in blue
colour and another 5 in red
colours.
2) x and –x in same size,
50mm. x 10mm. 10 tiles in
blue colour and another 10 in
red colours.
3) 1 and –1 in same size,
10mm. x 10mm. 20 tiles in
blue colour and another 20 in
red colours.
Packed in plastic box.
As per sample
Note-Sheet thickness 3mm &
Printing on tiles required
01 set
13. Plastic Box 80 mm x 70 mm x 35 mm 01
Page 34
14
CUT OUTS
For area of a circle
A A
BBB
CC C
C
D
D
DD
E
EEE EE EE E
E
E
Blue colour Plastic corrugated
sheet 3 mm thickness dia 160
mm. five circle in the deferent
4, 6, 8, 12, and 16 equal parts.
As per sample
Sheet thickness 3mm
01 set
15
Trigonometric
Circle Board
260mm. x 260mm. x 10mm.
thick wooden card board
.120mm. bottom and 120mm.
left side take the center of the
board and center to circular
dials 200mm. circular groove
5mm. x 6mm. depth. X and Y
marking in the dials. Full
protractor 360o marking center
and 5o to 10
o marking out side
of dials dia 5mm.x 6mm. hole
in the center and top of
circular board locating
As per sample
Note- Material of Board may
be either wood or plastic
01
16
Connectors
For (Strip)
Stainless steel, length 25 mm.
and dia 5 mm. with rubber
sleeve.
As per sample
15
17
Connectors
(T-Type)
Flat rivet type 20mm. height
and dia 4mm. with rubber
sleeve.
As per sample
10
18
Set Square
As per standard medium size.
01 Set
19
Rotating Needle
Steel rod dia 3mm. x
200mm.length with one side
‘L’ band dia 5mm. rivet
attached with road.
As per sample
01
Page 35
20.
CUTOUTS
with CUBOID
a) Cone
b) Cuboids
c) Cylinder
d) Hemisphere
Wooden solid Cube 60mm. x
60mm. 4 side of the cuboids
tope bottom and right left side
fitted dia 30mm. x 30mm.
height cone in the top, bottom
fitted 30mm. x 30mm. x
15mm. height cuboids, right
side dia 20 x 20mm. height
cylinder and left side dia 30 x
15mm. height hemisphere.
As per sample
Note- Material of Board may
be either wood or plastic
01 set
21
Kit Box along with
carton
12mm.ply box outer size 425
mm. x 300 mm. x 110 mm.
heights with flap. Two part
should have suitable hinges
and locking system as per
sample. Inside of the box and
flap have pockets potting the
kit items as per sample. the
front side of the box in centre
folding type handle as per
sample. Painted with teak
colour inside and outside.
Carton packing and placing of
kit box ready for transport.
As per sample
01 each
Page 36
ANNEXURE-8
SECONDARY SCIENCE LAB KIT (BIOLOGY)
Technical Specification
S.No Item Name Figure/stapes Specification No.
Off
1.
Kit Box
12 mm. thick wooden ply outer
box size 350mm. x 320 mm x
250mm.depth with door. In side
the box three pocket one side and
one for microscope. locking
system and handle in the top.
painted in teak colors .
As per sample
01
2.
Compound
Microscope
ISI marked microscope : metal
body, overall height approx. 320
mm, base 125 mm x 200 mm.
Achromatic good quality lenses.
Two Objectives : 10x & 45x.
Two Eyepieces : 10x & 15x
having coarse & fine adjustment
knobs & fixed condenser.
01
3. Glass micro slides
Standard glass item 75mm. x
25mm x 1mm. thick.
08
4. Pasteur Pipette
(Dropper)
Low Density Poly Ethylene
(LDPE), capacity 03 mL.
04
5.
Washing Brush
Soft hairs. Micro test tube brush.
01
6.
Razor Blade
Stainless steel. standard
size
02
7.
Micro Test Tubes
Borosilicate glass, diameter 10 x
45 mm. height with rim,
06
8.
Test tube holder
Length 200 mm, to hold the test
tubes upto 10 mm dia.
01
9.
Beaker 50 mL.
50 ml40302010
Borosilicate glass, capacity 50
with 10mL graduation.
02
Page 37
10.
Beaker 10 mL.
Borosilicate glass, capacity 10
mL, dia 25mm x 34 mm height
02
11.
Magnifying
Lens
Aluminium made two folding
type first fold attached with
convex lens. Folding size 32mm.
x 22mm
01
12. Watch glass
Soda glass, diameter 50 mm.
02
13.
Needles Standard, length 110 mm, with
plastic handle.
02
14.
Forceps
Stainless steel, length 100 mm.
01
15.
Blotting paper
Standard quality. In square shape
100 x 100mm.
10
16.
Test tube rack
Perspex sheet size 100 mm X 27
mm X 12 mm. 04 holes to hold
Micro Test Tubes.
01
17.
Wash Bottle
LDPE, capacity 125 mL.
01
18.
Surgical Scissor
125 mm, one prong blunt and other
pointed, standard.
01
19.
Glass rod
Solid glass rod dia 5mm. x
170mm.
02
20. Filter paper
Ordinary. Circular of dia 100 mm
10
21.
Measuring cylinder
10 mL
High Density Poly
Ethylene(HDPE), capacity 10
mL.
01
22. Cotton
Mini cotton role 50g. 1pack
23. Muslin cloth
Fine cotton cloth 150x150mm.
Piece.
01
24. Painting brush 01 number size with Fine heir 01
Page 38
25.
Spring balance
A.B.S, open type, capacity 250 g
graduation in steps of 10 g on one
side on front face and Newton’s on
the other side on front face.
As per sample.
01
26.
Measuring Pan
with Holder
Plastic pen, dish type dia
80mm. with wire holder.
01
27.
Laboratory Stand
Assembly
(a) Steel rod
(b) Clamp
(c) Boss Head
(d) Base Plate (e) G Clamp
G’ clamp, 50 mm jaws, maximum
opening 40 mm, with two locking
screws and holes. HDPE
MS rod dia 10 mm x 300 mm long, ,
Boss head and laboratory clamp
As per sample
01 each
28.
Assembly
Boiling tube with
cork fitted glass
tube
Borosilicate boiling glass tube
dia 25mm. x 150mm.length with
rim.
And assembled cork with bore
dia 5mm.x 140mm.length glass
tube fitted in the cork bore.
02
29.
Tripod
Alumunium Top : 63 mm dia X
height 15 mm, three blind holes
to hold test tube. Three legs :
Mild Steel Rod 04 mm diameter
X 165 mm overall length
180mm. As per sample
01
30.
Kerosene Burner
0.4 mm thick plated tin sheet
container dia 75 x 55 mm height
fitted with container lid locked
with four aluminium wick
holder dia 6.3 x 42 mm height.
Cover with ebonite insulator and
aluminium spacer to lock the
container lid and chimney holder
inside dia 45 mm x 5 mm height.
MS sheet plated with centre 20
mm dia seam hole attached with
inner chimney dia 20 mm inside
x 56 mm height. Fitted with 0.4
mm thick plated cap. Outer
chimney dia 45 mm x 56 mm
height MS sheet 0.63 mm thick
plated fitted with chimney
holder. Both chimney at crossing
points holes dia 1.5 distance 6.5
x 5.6 mm. Overall Burner height
140 mm. As per sample
01
Page 39
31.
Test tube 20mL
Borosilicate boiling glass tube
dia 25mm. x 150mm.length with
rim.
02
32.
W- Tube
Borosilicate glass, 2 mm thick x 8 mm dia having length of arm 75 mm with wide mouth in one arm.
02
33.
Thread
Small real cotton thread
01 real
34.
Petridis
Borosilicate dia 90mm. x
16mm. depth.
02
35.
Cover glasses
Cover slips
Microscopic cover glass 18mm.
01peck
36.
U-clips
Standard medium size
01
dozen
37.
Knife/Cutter
100 mm X 1.5 mm, hardened steel,
with wooden handle.
01
38. Split cork
Rubber cork of axial length 30 mm,
smaller face dia 20 mm. bigger face
dia 25 mm. in the two equaled part
01
39. Black paper
Black chart paper A4 size.
01
40. Magnifying glass
(A type)
Optical glass, focal length 120
mm, in the plastic frame with
handle handle.
01
41.
Vials
High Density Poly Ethylene
(HDPE), height 55 mm, diameter
15 mm.
As per sample.
06
42.
Dispensing Bottle
Low Density Poly Ethylene
(LDPE), Capacity 15 mL, with
screw type cap and nozzle.
As per sample.
06
43 A box of tooth pick 01 box
44 Conical Flask 25 ml borosilicate glass 01 No.
Page 40
Fitted with cork & delivery
tube
45. Permanent slides
a) Parenchyma
b) Collenchyma
c) Sclerenchyma
d) Epithelial tissue
e)Striated Muscles
f)Smooth muscles
e) Nerve cells
f) Hydra (budding)
g) Spirogya
h) Binary fission in
Amoeba
i) Hydra
j) Malarial Parasite ( showing life cycle)
k) some diseased
plants.
l) Binary fission in
Paramoecium
Packed in plastic box.
One
each
46. Specimens
a) Starfish
b) Tape worm
c) Mosquito
Lifecycle
d) Silk moth
e) Honeybee
f) Cockroach
g) Earthworm
h) Ascaris
One
each
47 Plastic boxes Appropriate size to keep all
glass items. 3 Nos.
Page 41
ANNEXURE-9
SECONDARY SCIENCE LAB KIT (PHYSICS)
TECHNICAL SPECIFICATION
S.No Item Name Figure/stapes Specification Quantity
1
Spring balance
A.B.S, open type, capacity 250 g wt graduation
in steps of 10 g wt on one side on front face and
Newton’s on the other side on front face.
As per sample.
02
2 Magnetic
Compass
S N
W
Metal case, polystyrene transparent top,
magnetized needle with north marked red and
south marked blue, dia 50mm x 8mm hight.
01
3 Set of three
resistors 5
Ohm, 10 Ohm
and 15 Ohm
20 oh
m
10 ohm
5 ohm
15 mm x 15 mm x 125 mm with nicrohme wire
resistance, embedded in plastic case with
terminal. Three combine set all connected in
series, it will work as a rheostat.
03
4
Measuring
Cylinder
Plastic, transparent with built in base, 100 mL
graduation (min 1 mL), marking with 10 to
100mL.
01
5 Bar Magnet Size 75 x 12 x 08 mm. red colour N and S pole
mentioned. Alnico
02
6 Ring magnet
Outer diameter 18 mm and inner dia 7mm and
thickness 3mm. Ferrite
1 No.
7
Disk Magnet
Diameter 35 mm and 8 mm thick. Ferrite
01
8 U-shaped
magnet
Arms length 50 mm, , red colour N and S poles
to be marked. 10mm x 08mm rod. Alnico
01
9
Aluminium
pipe
Think pipe 0.5mm & length 100mm. x diameter
6mm.
01
10 Slinky
Steel Wire Spiral roll, outer dia 52 mm and close
size 68-70 mm. 0.5 mm thickness writhe 0.2
mm.
01
11 One way Key
One way plug key (Brass), base78 mm x 54mm.
01
Page 42
12
Laboratory
Stand
Assembly
1) M.S. rod
2) Boss head
3) Base
4) Clamp
M.S. rod dia 9.2 mm x 380 mm long, chrome
plated. with M.S. base thickness 2mm and black
powder coating. C.I. Boss head black painted as
per standard. with clamp 235mm long.
As per sample
M.S.
Rod 01
Boss head
01
Base 01
Clamp 01
13 Connecting
Wire ,
Crocodile clips
Soft electric wire 400 mm. length both end fitted
with Crocodile clips. three red and three black.
3 set
(6 pcs.)
14
Connecting
Wire , banana
clips
Soft electric wire 400 mm. length both end fitted
with banana clips. three red and three black.
3 set
(6 pcs.)
15
Metal
Cylindrical
with Hook
? ?
Solid cylindrical M.S. and aluminium dia 20mm
x 50mm length with hook.
01 Alu.
01 M.S.
16
Pendulum Ball
with hook
? ?
Steel ball dia 20mm. & another ball 35mm
attached with hook for pendulum.
01 each
17 Split Rubber
cork
07 No. size
01
18
Thread
Fine quality Cotton thread thick approx 01mm.
01 reel
19 Concave
Mirror
Dia 50mm. focal length 10 centimeter & 15 cm.
01each
20
Convex Mirror
Dia 50mm. focal length 10 centimeter & 15 cm.
01 each
21 Lens double
convex
Dia 50mm. focal length 10 centimeter & 15 cm. 01 each
22 Lens double
concave
Dia 50mm. focal length 10 centimeter & 15 cm. 01 each
23
Prism
Equilateral glass prism 25 x 25 mm.
01
24
Glass Slab
Glass slab 75 x 50 x 12 mm height.
01
25
Plano concave
Spherical Plano Lenses made from
Perspex sheet of size 50 mm x 20 mm x
12 mm.
2 Pcs.
Page 43
26
Double Convex
Lens
Spherical Double convex lenses. Each
made from Perspex sheet of size 50 mm
x 20 mm x 12 mm. and matching with
Plano concave.
01
27 Half
Cylindrical
Lens
Perspex rod of size dia 25 mm x 15 mm
height.
01
28
Cell Holder
Cell holder for 4 ‘D’ type cells box outer size
135 x 75 x 35 mm. height with cover.
01
29
Copper Strip
Strip size 60 x 10 x 0.5mm.
01
30 Enameled
cupper wire
24 SWG. Enameled cupper wire. 1 meter length
approx.
1 meter
role
31
Nichrome wire
24 SWG. Nichrome wire. . 1 meter length
approx. 1 meter
role
32
Nichrome wires
Three resistance wires of Nichrome of
different diameters.
1. dia 5.5mm (24SWG)
2. dia 4.3mm (27SWG)
3. dia 3.8mm (28SWG)
1 meter
33
Constantan
Wire
27 SWG. ,1 meter role.
1 meter
34
Multicore
flexible
insulated
electric copper
wire
2 meter length, wire dia 0.19 mm (36
SWG)
Total No. of cores- 21
2 meter
rol
35
250g weight
with hook
One 50g disc attached with dia 3mm x 90mm.
hook and author number of four 50g weight
fitted with slots one by one total weight will be 5
x 50g = 250g.
1 sets
36
Ray steak Box
U shape mild sheet of 24 SWG. Size of the front
face: 85 mm x 70 mm to 75 mm with M shape
window of size of 30 mm x 30 mm starting from
centre bottom side of front face. Size of two side
faces: 40 mm x 70 mm. spot welded to the front
face. Size of the M shape window cover : 30
mm x 40 mm. Front face, projected to the height
of 15 mm having 3 slits of 0.75 mm thickness
starting from bottom. Height of slits 30 mm,
second slits at the centre. Distance between the
slits 5 mm. Screw type bulb holder spot welded
from inside Complete apparatus painted black.
Supplied along with single slit strip.
1 sets
Page 44
As per sample.
37
Protector
(Half)
Transparent plastic dia 90 mm,
thickness 2 mm. Double angle marking
0-1800
02
38
Plane mirror
strips
Glass strip 150mm. x 30mm x 2mm. thick.
02
39
Beaker 50ml
50 ml4030
2010
50 mL beaker borosilicate glass with 10 mL
graduation.
01each
40
stirrer
Glass stirrer rod dia 4mm x 106mm length 01
41
Multimeter
With Battery
Pocket size, digital, high impedance.
Function:- DCV, ACV
Resistor(ohm) Diode, Buzzer,
transistor(HFE), Temperature, Square
wave output, Battery test. As per sample.
02
42
Laboratory
Thermometer
Glass, alcohol filled, -10º C to 110º C,
graduation 1º C with card board/plastic cover
and cotton at both ends.
01
43
(i) Perspex lens
holder
(ii) Screen
holder
(iii) Candle
Holder
(i)
(ii) (i) Dia 35mm. Perspex rod over all hight 55mm
with with 2.5 mm x 10mm elliptic depth slot
& 4mm wide x 6mm elliptical depth slot.
Bottom end slot 5mm x 27.5 mm for sliding
on wooden scale.
(iii) Perspex piece over all height 21.5mm
approx round bottom 47.5 mm slit 27.5 x
5mm depth width 25.5 mm top slit straight
8mm deep & 3mm wide.
(iii) Perspex piece over all height 21.5mm
approx round bottom 47.5 mm slit 27.5 x 5mm
depth width 25.5 mm top have 12mmdia hole x
8mm depth
01
01
01
44
Wooden scale /
Optical Bench
400 + 400mm x 27mm. x 6mm. thick
wooden scale. Marking in top
centimeter and millimeter. in two parts
to be joint through two pins
01
45
Screen
White plastic glazed sheet 100mm. x 100mm. x
2.5mm.
01
46
Candle
Small size 80mm hight with out base
dia 12mm.
01
47
Thumb pins
Drawing pins standard item. 10mm with 15 dia
head.
1packet
30 Nos.
Page 45
48
Sand paper
Size A4 or 275 x 225mm Grain 100 to 120.
01
49
Pulley with
Frame & Rod
Plastic pulley dia 50mm attached with
frame 75mm x 17mm x 24.5SWG M.S
sheet and attached “L” type M.S rod dia
6mm x 115mm length and 23mm after
900. pulley fixed with aluminium
axle, friction free moving.
01
50
Plastic Box big
Polypropylene transparent milky White
box, Overall Size 225mm x 140mm x
75mm height with cover.
02
51
Plastic Box
small
Polypropylene transparent milky White
box, Overall Size 125mm x 75mm x
45mm. height with cover.
Use for putting glass item.
01
52
Stopclock
Mechanical
Main scale 0 to 60 s (least count one s),
small scale 0 to 60 minute (least count
one minute), appropriate size to store in
the kit box.
As per sample.
01
53.
Kit Box
12 mm. thick wooden ply outer box size
435mm. x 265mm x 180mm. height box
open with two flap top open back side
and front flap rest on the base. Inside of
the box in the middle sliding wooden
tray and back side pockets for putting
the kit items. Locking system and
handle in the top painted with teak
wood colour. As per sample.
01
Page 46
ANNEXURE-10
Secondary Science Lab Kit (Chemistry) Technical Specification
S.No Item Name Figure/Stapes Specification Quant
ity
1. Micro Test Tube
Borosilicate glass, diameter 10 x 45 mm height with rim
16
2.
Test Tube Holder
Length 200 mm, to hold the test tubes upto 10 mm dia. .
01
3.
Test Tube Stand
Perspex sheet size, 100mm x 27mm x 12 mm height with four blind holes to hold micro test tubes dia10mm.
04
4. Dropper with Rubber Bulb
Rubber bulb with 100 mm x dia 6 mm. Glass tube, overall dropper size 125 mm.As per sample
02
5. Glass Rod and Stirring Rod
Glass rod Dia 4 mm x 100 mm in length
01 each
6.
Spatula
Overall size 104mm spoon size 9 x 7 mm. Stainless steel
01
7.
Beaker (10 mL)
Borosilicate 10 mL with rim. dia 25mm x 34mm height.
04
8.
Funnel
Borosilicate top dia.40 mm.
01
9.
Dry Cell Holder
Cell holder for 4 ‘D’ type cells. Box outer size 135 mm x 75 mm x 35 mm. height with cover.
01 set
10.
Torch Bulb with Holder
Screw type bulb holder with 3 V bulb. As per sample
01 set
11.
Beaker (50 mL)
50 ml40302010
Borosilicate glass, capacity 50 mL with 10mL graduation.
01
Page 47
12.
Measuring Cylinder (10 mL)
Height density polyethylene ( HDPE) capacity 10 mL As per sample
01
13.
W- Tube
Borosilicate glass, 2 mm thick x 8 mm dia having length of arm 70-75 mm with wide mouth in one arm. As per sample
06
14.
Tripod
Aluminium top 63 mm dia x 15 mm thick 3 blind hole dia 10.5 x 10 mm depth to hold test tube. Attach with three legs 4 mm dia x 165mm allover length180mm. As per sample
01
15.
Kerosene Burner
0.4 mm thick plated tin sheet container dia 75 x 55 mm height fitted with container lid locked with four aluminium wick holder dia 6.3 x 42 mm height. Cover with ebonite insulator and aluminium spacer to lock the container lid and chimney holder inside dia 45 mm x 5 mm height. MS sheet plated with centre 20 mm dia seam hole attached with inner chimney dia 20 mm inside x 56 mm height. Fitted with 0.4 mm thick plated cap. Outer chimney dia 45 mm x 56 mm height MS sheet 0.63 mm thick plated fitted with chimney holder. Both chimney at crossing points holes dia 1.5 distance 6.5 x 5.6 mm. Overall Burner. As per sample
01
16.
Laboratory Stand 1) Boss head 2) M.S. Rod 3) clamp 4) Base Plate 5) G-clamp
MS rod dia 10 mm x 375 mm long with base attach with G-clamp and Boss Head. As per sample
01
each
17. Litmus Paper
Red and Blue colours.
1booklet each
18.
Watch Glass
Soda glass, dia 50 mm x 2 mm thick.
01
Page 48
19.
China Dish
Bowl, outer diameter 70 mm / 75mm.
01
20.
Magnet (Bar)
Size 75 mm x 12 mm x 08 mm, red colour N and S pole mentioned Alnico.
02
21.
Thermometer (Laboratory)
Glass, alcohol filled, -10º C to 110º C, graduation 1º C with card board/plastic cover and cotton at both ends.
01
22.
pH Paper
pH 1-11, paper box containing, 10 booklets
10 bookle
ts
23.
Metals ( Zn, Cu, Fe,
Strips , dimension 80 mm x 5 mm, x1mm. As per sample
05 each
24. Emery Paper and Sand paper
A4 size sheet of each
01 each
25. Iron Nails
Length 50 mm As per sample
06
26. Fe- Filings and Zn dust
Packed in plastic container . 20 g each
27.
Filter paper
Ordinary. Circular of dia 100 mm
10
28. Micro Test Tube Brush
Plastic, Soft Hair, 120mm in length.
01
29.
Dispensing Bottle
Low density poly ethylene, capacity 15mL dia 30mm. with screw cap and nozzle. As per sample
15
30
Vials
Low density poly ethylene , 55mm. height x dia 15 mm. As per sample
20
Page 49
31.
Double mouthed flask
Borosilicate. Thickness 1.5 mm with one mouth dia 26 mm x 25 mm height (with rim) and outer dia of nozzle 06mm to 08 mm x 28 mm length. Bulb outer dia 50 mm with overall length 110 mm. As per sample.
01 No.
32.
Stop cock
Borosilicate glass, capacity 05 mL, is rotating screw type flow stop cock with Poly Tetra Flour Ethylene (PTFE) key and cup. As per sample
01
33.
PVC. Tube
PVC. Tubing pieces 6 mm to 8 mm to fit with item No.31 inner dia and lengths 30mm.
04
34.
Micro Filtration Unit
Borosilicate glass, Boiling tube : height 80 mm, diameter 20 mm, having side tube for fitting rubber bulb, Small rubber bulb, rubber cork to fit on the boiling tube, Hirsch funnel - 01 number.
01
35
Copper Electrodes
Rubber cork of axial length 29mm, smaller face dia 20mm & bigger face dia 26mm fitted two copper electrodes length 80 mm, dia 3mm. Both electrodes have 900
bent length 10 mm.
01 set
36.
One way Key
One way plug key (Brass), base 80 mm x 55 mm.
01
37.
Connecting Wire
Soft electric wire 200 mm. length both end fitted with crocodile clips Two red and two black. As per sample
04
38. Magnesium Ribbon
5mm x 5 meter role 01
39.
Cotton wool
Mini cotton role 50 g 1 pack
40
Wash Bottle
LDPE, capacity 125 mL. good quality.
01
Page 50
41
Pasteur Pipette (Dropper)
Low Density Poly Ethylene (LDPE), capacity 03 mL.
06
42
Plastic Box
Polypropylene transparent milky
White box, Overall Size 115mm x
95mm x 48mm height with cover.
01
43
Kit Box along with carton
12 mm. thick wooden ply outer box size 425mm. x 250 mm. width x 180mm. height with flap box open with two flap top open back side and front flap rest in the base. Inside of the box slabs for vials and dispensing bottles or mini item locking system and handle in the top as per sample. Carton packing and placing of kit box ready for transport. As per sample.
01 each
