+ All Categories
Home > Documents > B43 Eljen Geotextile Sand Filter B43 Spec Sheet PRINT 050619.pdfJun 19, 2005  · The Eljen GSF...

B43 Eljen Geotextile Sand Filter B43 Spec Sheet PRINT 050619.pdfJun 19, 2005  · The Eljen GSF...

Date post: 25-Jul-2020
Category:
Upload: others
View: 12 times
Download: 0 times
Share this document with a friend
1
The Eljen GSF (Geotextile Sand Filter) is an alternative onsite septic leachfield system. Each GSF Module is made up of geotextile fabric and a plastic core material that work together to provide vertical surface area and oxygen transfer. The GSF System applies secondary treated effluent to the soil, increasing the soil’s long-term acceptance rate. A Specified Sand layer provides additional filtration, and prevents saturated conditions. Printed on recycled paper B43 Eljen Geotextile Sand Filter INSTALLATION Installation shall comply with the latest installation instructions published by Eljen Corporation and abide by local regulations. Eljen Modules are installed along their 4-foot lengths on a base of stabilized Specified Sand, with the painted stripe facing up. A 4˝ perfor- ated pipe is centered on top of the Modules, and is secured with supplied metal clamps (one per Module). Cover fabric is supplied by Eljen and substitutions are not allowed. Specified Sand is placed along both sides of the Module, and at the beginning and end of each row once the cover fabric is in place. For more specifications and detailed installation instructions consult the appropriate Design and Installation Manual. EXAMPLE INSTALLATION Patented ©2019 Eljen Corporation 1933A–05/19 Innovative Onsite Products and Solutions Since 1970 CORPORATION Tel: 800-444-1359 Fax: 860-610-0427 Email: [email protected] www.eljen.com
Transcript
Page 1: B43 Eljen Geotextile Sand Filter B43 Spec Sheet PRINT 050619.pdfJun 19, 2005  · The Eljen GSF (Geotextile Sand Filter) is an alternative onsite septic leachfield system. Each GSF

The Eljen GSF (Geotextile Sand Filter) is an alternative onsite septic leachfield system. Each GSF Module is made up of geotextile fabric and a plastic core material that work together to provide vertical surface area and oxygen transfer. The GSF System applies secondary treated effluent to the soil, increasing the soil’s long-term acceptance rate. A Specified Sand layer provides additional filtration, and prevents saturated conditions.

Printed on recycled paper

B43 Eljen Geotextile Sand Filter

INSTALLATION Installation shall comply with the latest installation instructions published by Eljen Corporation and abide by local regulations. Eljen Modules are installed along their 4-foot lengths on a base of stabilized Specified Sand, with the painted stripe facing up. A 4˝ perfor-ated pipe is centered on top of the Modules, and is secured with supplied metal clamps (one per Module). Cover fabric is supplied by Eljen and substitutions are not allowed.  Specified Sand is placed along both sides of the Module, and at the beginning and end of each row once the cover fabric is in place.

For more specifications and detailed installation instructions consult the appropriate Design and Installation Manual.

EXAMPLE INSTALLATION

Patented ©2019 Eljen Corporation 1933A–05/19

Innovative Onsite Products and Solutions Since 1970

C O R P O R A T I O N

Tel: 800-444-1359 • Fax: 860-610-0427 Email: [email protected]

www.eljen.com

Recommended