AMPHENOL 1 ACCESSORIES INTRODUCTION Amphenol is a leading designer, manufacture and marketer of interconnection solutions since 1972. Amphenol is the first Company in India who started manufacturing high performance connectors. These expertise and capabilities enables us to turn your interconnection problems to solutions Amphenol Back Shells and Accessories are developed for environmental protection needs of circular connectors. These are designed to meet the requirements of military standards. The Military numbers indicated in this catalogue are for reference only. This catalogue describes the standard and special purpose designs used in Military and industrial circular connectors meeting the following specifications. MIL-C-5015 MIL-C-26482 MIL-C-38999 MIL-C-55116 Index Contents Page Series 62 IN 2 Series MS/97/97B 10 Series MS347 & MS Crimp 17 Series 38999 24 Series 164 31
Transcript
AMPHENOL 1
ACCESSORIES
INTRODUCTION
Amphenol is a leading designer, manufacture and marketer of interconnection solutions since 1972. Amphenol is the first Companyin India who started manufacturing high performance connectors. Theseexpertise and capabilities enables us to turn your interconnectionproblems to solutions
Amphenol Back Shells and Accessories are developed forenvironmental protection needs of circular connectors. These aredesigned to meet the requirements of military standards. The Militarynumbers indicated in this catalogue are for reference only.
This catalogue describes the standard and special purpose designsused in Military and industrial circular connectors meeting the following specifications.
MIL-C-5015MIL-C-26482MIL-C-38999MIL-C-55116
Index
Contents Page
Series 62 IN 2 Series MS/97/97B 10 Series MS347 & MS Crimp 17 Series 38999 24 Series 164 31
AMPHENOL 2
ACCESSORIES
SERIES 62IN
These are the accessories compatible with miniature circular bayonet-coupledconnectors according to MIL-C-26482 Series 1. The standard finishes of theseaccessories are Cadmium with olive drab chromate. Other alternate finishes arealso available on request.
62IN-584 Grommet seal & nut
62IN-585 Grommet seal & nut with Strain Relief Clamp
62IN-720 Clamp for Unscreened jacketed cable
62IN-776 General duty shell
62IN-736 Cap with chain for single hole mounting Receptacle
62IN-737 Cap with chain for cable Receptacle
62IN-738 Cap with chain for flange mounting Receptacle
62IN-742 Cap with chain for plug
62IN-810 Cap with Chord for plug
62IN-812 Cap with Chord fo flange Receptacle
62IN-813 Cap with Chord for single hole mount Receptacle
62IN-814 Cap with Chord for cable Receptacle
62IN-760 Flange mounting gasket
62IN-pg PG Adapter
AMPHENOL 3
ACCESSORIES
62IN - 584 - XX - XXS or P
Suffix XX - XXS or P enables grommetto be matched to the insert arrangement.
584
13.84
13.84
13.84
13.84
13.84
13.84
13.84
13.84
12.73
14.25
17.43
20.60
23.78
26.95
30.13
33.30
36.75
39.65
08
10
12
14
16
18
20
22
24
Shell Size A G max
62IN - 585 XX- XXS or PGrommet and nut with strain relief clamp.The clamp prevents the flexing of the wires inThe immediate vicinity of the risers, soavoiding the risk of leaks.
Shell Size
24
08
10
12
14
16
18
20
22
34.88
A max
25.17
25.17
25.17
24.51
28.07
28.07
32.64
32.64
44.07
G max
21.03
22.63
25.81
28.98
36.22
36.22
36.22
39.80
16.00
16.00
20.45
H max
4.09
4.90
8.05
9.65
16.00
19. 18
Suffix XX - xxS or P enables Grommetto be matched to the jnsert arrangement.
585
Gmax H
A o/all max
G max
A o/all maxGrommet seal and nut provides an environ-mental for the exposed solder buckets in theopen back class T shells.
AMPHENOL 4
ACCESSORIES
A o/all max
Gmax Z
Suffix XX specifies shell size
ShellSize
08
10
12
14
16
18
20
22
24
A max
27.56
26.92
29.46
34.54
40.26
45.34
50.32
55.39
56.28
Gmax
14.25
17.43
20.60
23.78
26.95
30.13
33.30
36.75
39.65
closed
4.28
5.21
8.59
10.57
13.97
15.24
16.13
17.02
18.80
free
5.84
7.93
11.23
13.69
15.65
17.57
18.98
21.49
22.71
Z
62IN - 720 - XX
Clamp for unscreened jacketed cableNo grommet is supplied, for use with50T, 51T and 56T styles.
ShellSize
08
10
12
14
16
18
20
22
24
AMax
23.80
23.80
23.8
23.80
23.8
23.80
23.8
23.80
23.8
MThred
1/2 - 28 UNEF
5/8 - 24 NEF
3/4 - 20 UNEF
7/8 - 20 UNEF
1 -20 UNEF
1.3/16 -18 NEF
1.3/16 - 18 NEF
1.7/16 - 18 NEF
1.7/16 - 18 NEF
A o/all max
M
62IN -776
General duty shell to accept conduit,AN 3057 orMS 3057 A cable clamps and heatshrink sleeves.
AMPHENOL 1
ACCESSORIES
A
B
C
J Dia
ShellSize
08
10
12
14
16
18
20
22
24
A-6.35
76.2
76.2
88.9
88.9
88,9
88.9
101,6
101.6
101.6
B-0.13
15.21
15.21
15.21
15.21
15.21
15.21
15.21
15.21
15.21
CDIA MAX
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
J- 0.127
11.63
14.81
17.98
22.76
25.93
29.11
32.28
35.46
38.63
62IN - 737Caps and chains for cable mounting receptacles
62IN - 736Cap and chains for single holemounting receptacles
ShellSize
08
10
12
14
16
18
20
22
24
A-6.35
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
B-0.13
13.23
13.23
13,23
13.23
13.23
13.23
13.23
13.23
14.12
CDIA MAX
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
J+ 0.127
14.68
17.86
22.63
25.81
29.39
32.16
35.33
38.51
41.68A
B
C
J Dia
736
AMPHENOL 6
ACCESSORIES
738 B
C
J Dia
A
62IN - 736Caps and chains for flangemounting receptacles.
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.23
13.23
13.23
13.23
13.23
13.23
13.23
13.23
14.12
ShellSize
A- 6.35
Cdiamax
B- 0.13
J-0.127
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.86
A
B
C
J Dia
742
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.25
13.25
13.25
13.25
13.25
13.25
14.83
14.83
15.67
ShellSize
A- 6.35
Cdiamax
B- 0.13
J-0.127
18.26
21.43
25.4
28.57
31.75
34.92
38.1
41.27
44.45
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.86
62IN - 742Caps and chains for plugs.
AMPHENOL 7
ACCESSORIES
812B
C
A
J Dia
810
A
B
C
J Dia
62IN - 810Caps and cords for plugs
62IN - 812Caps and cords for flangemounting receptacles.
08
10
12
14
16
20
22
24
76.2
76.2
88.9
88.9
88.9
101.6
101.6
101.6
13.25
13.25
13.25
13.25
13.25
14.83
14.83
15.67
ShellSize
A- 6.35
Cdiamax
B- 0.13
J-0.8
18.26
21.43
25.4
28.57
31.75
38.1
41.27
44.45
3.68
3.68
3.68
3.68
3.68
3.68
3.68
4.34
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.23
13.23
13.23
13.23
13.23
13.23
13.23
13.23
14.12
ShellSize
A- 6.35
Cdiamax
B- 0.13
J-0.08
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
3.68
3.68
3.68
3.68
3.68
3.68
3.68
3.68
4.34
AMPHENOL 8
ACCESSORIES
A
J DiaB B
C C
B
C
A
J DiaJ Dia
814
81362IN - 813Caps and cords for single holemounting receptacles.
62IN - 814Caps and cords for cablemounting receptacles.
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.23
13.23
13.23
13.23
13.23
13.23
13.23
13.23
14.12
ShellSize
A- 6.35
Cdiamax
B- 0.13
J-0.25
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
14.68
17.86
22.63
25.81
29.39
32.15
35.33
38.51
41.68
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.23
13.23
13.23
13.23
13.23
13.23
13.23
13.23
14.12
ShellSize
A- 6.35
Cdiamax
B- 0.13
J-0.25
18.26
21.43
25.4
28.57
31.75
34.92
38.1
41.27
44.45
11.50
14.64
17.85
22.63
25.80
28.98
32.15
35.33
38.50
AMPHENOL 9
ACCESSORIES
62IN - 760Flange mounting gasket for boxmounting and hermetic receptacles.
X
B A
L
P GPG Adapter
08
10
12
14
16
18
20
22
24
20.62
23.82
26.18
28.57
30.96
33.32
36.52
39.70
42.87
15.08
18.26
20.65
23.01
24.61
27.00
29.36
31.75
34.92
12.90
16.07
19.25
22.42
25.60
28.77
31.95
35.13
38.30
3.30
3.30
3.30
3.30
3.30
3.30
3.30
3.30
3.96
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
ShellSize
D0.254
E0.254
F0.20
G+0.254
H
Part No. For Shell Size
62IN08-PG7 8
10
12
14
16
20
62IN10-PG9
62IN12-PG9
62IN14-PG13.5
62IN16-PG9
62IN20-PG21
X Thread in inches
13.23
13.23
13.23
13.23
13.23
13.23
A
16.50
22.00
22.00
28.00
29.00
35.00
B
14.50
17.70
21.00
23.50
27.80
34.00
L
20.00
20.00
20.00
25.00
30.00
40.00
PG7
PG9
PG9
PG13.5
PG9
PG21
PG Thread
H
G sq
E
sqD
F dia
760
+- +- +-
AMPHENOL 10
ACCESSORIES
SERIES MS/97/97B
These are the accessories compatible with Threaded-coupled connectors according to MIL-C-5015. The standard finishes of these accessories are Black anodic. Other alternate finishes are also available on request.
Protective cap forMS and 97 seriesMS-25042For PlugsHas external threads and used on all plugswhere a coupling ring is provided
Protective cap forMS & 97 series MS-25043For receptaclesHas internal threads & is used on allreceptacles. Gasket is provided in the dust cap forming a watertight seal.
MS 25042-10-1
MS 25042-12-1
MS 25042-14-1
MS 25042-16-1
MS 25042-18-1
MS 25042-20-1
MS 25042-22-1
MS 25042-24-1
MS 25042-28-1
MS 25042-32-1
MS 25042-36-1
MS 25042-40-1
MS Part number For connector size
MS 10S-1-SL
MS 12-12S
MS 14-14S
MS 16-16S
MS 18
MS 20
MS 22
MS 24
MS 28
MS 32
MS 36
MS 40
A Thread in inches
5/8-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2 1/4-18
2 1/4-186
2 1/2-16
B
16.67
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
C
17.4
20.6
23.7
26.9
30
33
36.4
39.6
46
52
58.7
65
D E
4
4
4
4
4
4.8
4.8
4.8
4.8
5.6
5.6
5.6
102
115
115
115
115
127
127
140
197
197
197
-SLS-197
All Dimensions are in mm
MS 25043-10-1
MS 25043-12-1
MS 25043-14-1
MS 25043-16-1
MS 25043-18-1
MS 25043-20-1
MS 25043-22-1
MS 25043-24-1
MS 25043-28-1
MS 25043-32-1
MS 25043-36-1
MS 25043-40-1
MS Part number For connector size
MS 10S-1-SL
MS 12-12S
MS 14-14S
MS 16-16S
MS 18
MS 20
MS 22
MS 24
MS 28
MS 32
MS 36
MS 40
A Thread in inches
5/8-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2 -18
2 1/4-18
2 1/2-16
B
11-11
11-11
11-11
11-11
11-11
11-11
11-11
11-11
12-7
12-7
12-7
12-7
C
20.7
25.4
28.6
30.2
34.1
37.3
40.4
43.6
50
56.3
62.7
69
D E
3.6
3.6
3.6
3.6
3.6
4.4
4.4
4.4
4.4
4.8
4.8
4.8
102
115
115
115
115
127
127
140
197
197
197
197
All Dimensions are in mm
Notes : 1. For protective caps without chain or with nylon cord, contact factory
2. Standard - black anodised finish. For alternatives, contact factory.
3. Standard - straight For diamond knurling on caps, contact factory.
AMPHENOL 13
ACCESSORIES
E
A
B
E
Protective cap for97B series97B-25042
For Plugs
A
B
D
E
Has external grooves and is used on all plugs
97B 25042-10SL
97B 25042-14S
97B 25042-16S
Part number
97B 25042-16
97B 25042-18
97B 25042-20
97B 25042-22
97B 25042-24
97B 25042-28
97B 25042-32
97B 25042-36
97B 25042-40
For connector size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
A Max
23.00
30.00
32.50
32.50
36.40
40.50
43.50
46.50
54.00
60.00
66.20
73.00
B
24.00
24.00
24.00
33.00
39.00
33.00
33.00
44.00
33.00
46.00
46.00
33.00
D
4.20
4.20
4.20
4.70
4.70
4.70
4.70
4.70
5.60
5.60
5.60
5.60
E
102
115
115
115
115
127
127
140
197
197
197
197
Protective cap for 97B series97B-25043For receptalcesHas internal bayonet pinsand is used on all receptacles.
97B 25043-10SL
97B 25043-14S
97B 25043-16S
Part number
97B 2503-16
97B 25032-18
97B 25043-20
97B 25043-22
97B 25043-24
97B 25043-28
97B 25043-32
97B 25043-36
97B 25043-40
For connector size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
A Max
23.00
30.00
32.50
32.50
37.00
40.50
43.50
47.50
54.00
60.50
67.00
73.00
B
15.50
15.50
15.50
21.20
21.20
21.20
21.20
21.20
21.20
21.20
21.20
21.20
D
4.20
4.20
4.20
4.20
4.20
4.70
4.70
4.70
5.60
5.60
5.60
5.60
E
102
115
115
115
115
127
127
140
197
197
197
197
All Dimensions are in mm
All Dimensions are in mm
Notes : 1. For protective caps without chain or with nylon cord, contact factory
2. Standard - black anodised finish. For alternatives, contact factory.
3. Standard - straight For diamond knurling on caps, contact factory.
D
AMPHENOL 14
ACCESSORIES
C
AA C
Dia. D4 HOLES
Dia.
B
PG Adapter
Flange Gasket MS-52000
PG
B
A
L
G
10SL
12S
14
16
18
20
22
24
28
36
ShellSize
A AA A AAA
G Threadin inches
5/8-24
11/16-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 5/8-18
2 1/8-18
B BB B BBBL LL L LLL
30 21 26
A B L
23
25 2525
30
35
35
35
35
3535
3535
23
25
26
26
30 30
30
30
23
30
37 37
40
40
40
23
28
28
28
38
45 37 45 454545
57 57 5744
40 404040
40
40
55 55
PG 9 PG 11 PG13 PG16 PG21 PG29 PG36
MS-101000
MS-108686
MS-101001
Part number
MS-101002
MS-108688
MS-101007
MS-101006
MS-108687
MS-101005
MS-101004
MS-101003
For connector Size
10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
A Max
18.26
20.62
23.01
24.61
27.00
29.36
31.75
34.90
39.70
44.45
49.22
B
15.90
19.05
22.20
25.40
28.57
31.75
34.90
38.10
44.45
50.80
55.57
D
25.40
27.80
30.15
32.50
34.90
38.10
41.20
44.45
50.80
57.15
63.50
E
4.35
4.35
4.35
4.35
5.15
5.15
5.15
5.15
5.15
5.55
5.55
All Dimensions are in mm
All Dimensions are in mm
Notes : The dash number also indicates shell size.
Notes : For ordering information on flat gaskets and PG adaptors,contact factory.
AMPHENOL 15
ACCESSORIES
F MAX
A
B
D
E
OG/C/O
E
Dummy receptacleMS-3105
L
N
A
Strain Relief Backshell Class E and F
MS-108155
MS-108156
MS-108157
Part number
MS-108158
MS-108158
MS-108159
A
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
MS-108160
MS-108161
MS-108162
MS-108164
MS-108165
MS-108163
A Thread Class 2B ininches
5/8-24 NEF
11/16-24NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18NEF
1 5/8-18 NEF
1 29/32-18 NS
2 1/16-20 UNS
L max for MS/97
54.07
54.07
55.90
55.90
64.41
65.94
67.41
67.41
73.28
73.28
74.75
74.75
L max for 97B
59.10
---
61.34
62.86
71.10
72.55
72.55
76.82
77.82
77.64
Nmax
21.97
21.97
25.15
28.45
28.45
30.76
37.29
37.29
44.45
44.45
52.22
57.15
MS-3105-10S
MS-3105-12S
MS-3105-12
Part number (see note)
MS-3105-14S
MS-3105-14
MS-3105-16S
A B
25-4
27.79
27.789
30.17
30.17
32.54
32.54
34.92
38.10
41.27
44.45
50.8
63.5
18.26
20.62
20.62
23.01
23.01
24.61
24.61
26.97
29.36
31.75
34.92
39.67
49.22
MS-3105-16
MS-3105-18
MS-3105-20
MS-3105-24
MS-3105-28
MS-3105-36
MS-3105-22
C E F GD
Thread in inches
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
3.73
4.39
14-27
14-27
19-05
14-27
19.05
14.27
19.05
19.05
19.05
19.05
20.62
20.62
22.22
3.96
3.96
3.96
3.96
3.96
3.96
3.96
5.16
5.16
5.16
5.16
5.16
9.11
8.20
11.43
11.43
13.36
13.36
16.41
16.41
18.03
23.54
25.93
29.21
34.67
46.56
5/8-24
3/4-20
3/4-20
7/8-20
7/8-20
1-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2 1/4-16
All Dimensions are in mm
All Dimensions are in mm
Notes : The dash number also indicates shell size.
Standard finish is cadmium Olive drab
AMPHENOL 16
ACCESSORIES
L
L1
Q
A
V
MS-108917
MS-108918
MS-108918
Part number
MS-108919
MS-108919
MS-108920
Connector Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
MS-108920
MS-108921
MS-108922
MS-108924
MS-108925
MS-108926
MS-108923
MS-108927
A Thread Class 2B ininches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18NEF
1 5/8-18 NEF
1 29/32-18 NS
2 1/16-20 UNS
L max for MS/97
37.60
37.80
47.30
39.40
48.90
42.60
52.10
53.70
58.80
58.80
63.60
63.60
69.60
72.80
L max for 97B
L 1max
45.00
---
---
47.00
---
48.00
57.00
58.00
61.00
61.00
66.00
66.00
72.00
75.00
25.00
25.00
25.00
27.00
27.00
28.00
28.00
31.00
34.00
34.00
37.00
39.00
45.00
48.00
L 1max
22.22
25.40
25.40
28.57
28.57
31.75
31.75
34.13
37.30
40.48
43.66
50.00
56.50
62.71
V Thread in inches
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20UNEF
1-20 UNEF
1 3/16-18 NS
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
Standard finish is cadmium Olive drabNote : Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
All Dimensions are in mm
Right Angle Backshell
AMPHENOL 17
ACCESSORIES
M85049/26-1 Straight Shield Termination
M85049/26-2 Shielding Ring
M85049/31 Straight Back Shell
M85049/34 Straight Adapter
M85049/52-1 Straight SR Clamp
M85049/60-1 Shrink Boot Adapter
SERIES MS347 & MS CRIMP
These are the accessories compatible with connectors according to MIL-C-26482Series 2 & MIL-C-5015 Crimp type. The standard finishes of these accessories areCadmium with olive drab chromate. Other alternate finishes are also available on request.
AMPHENOL 18
ACCESSORIES
Dia
C
Dia
D
E
F THREAD B
Dia
A
Straight Shield TerminationM85049/26-1
FINISHMIL SPEC
SIZE CODESee Dimension Table Below
20 NM85049/26-1
N - ELECTROLESS NICKEL
W - CADMIUM, OLIVE DRAB
A - BLACK ANODIZE
28
32
36
8
10
12
14
16
18
20
22
24
SizeCode
MIL-C-26482Series 2
8
10
12
14
16
18
20
22
24
MIL-C-5015Crimp
85
10S,10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
Adia
15.68
18.65
21.80
25.00
28.25
30.94
34.17
37.29
40.47
50.10
56.37
62.72
BThread
Class 28
1/2-20UNE
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1-20UNEF
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
1-3/4-18UNS
2-18UNS
2.1/46UN
Cdia
8.56
12.40
12.70
15.75
19.05
22.36
25.44
28.45
30.28
39.25
45.60
51.95
Ddia
6.35
8.26
10.67
13.72
17.02
20.05
23.22
26.40
28.25
35.29
41.53
47.00
E
32.44
32.44
32.44
32.44
32.44
32.44
32.44
32.44
32.44
36.66
36.66
36.66
F
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
17.84
17.84
17.84
AMPHENOL 19
ACCESSORIES
THIS MAY BE USED WITH M85049/26-1, M85049/33
A B
L
Shielding RingM85049/26-2
ColourCode
GREEN
RED
BLUE
GRAY
BROWN
GREEN
PINK
RED
GRAY
GREEN
A dia
min
10.16
14.86
17.91
21.21
25.53
28.58
31.63
42.30
48.65
55.00
Max
10.42
15.12
18.17
21.47
25.79
28.83
31.88
42.55
48.90
55.25
STANDARD MATERIAL IS COPPER AND FINISH TIN PLATING CONSULT FACTORY FOR ANY VARIATIONS
SHELL SIZESee Dimension Table Below
M85049/26-2
MIL SPEC
-10
28
32
36
8
10
12
14
16
18
20
22
24
SizeCode
Min
12.40
16.77
19.82
23.12
27.44
30.48
33.53
44.20
50.55
56.90
Max
11.64
17.28
20.32
23.63
27.94
30.99
34.04
44.71
51.05
57.41
L-0.20
6.35
11.18
B dia
AMPHENOL 20
ACCESSORIES
A Dia
C THREAD B
Straight Back ShellM85049/31
W - Cadium, Olive DrabN - Electroless NickelA - Black Anodize
FINISHMIL SPEC
SIZE CODESee Dimension Table Below
10 WM85049/31
C ThreadClass 2B
28
32
36
MIL-C-26482 Series 2
8
10
12
14
16
18
20
22
24
8
10
12
14
16
18
20
22
24
SizeCode MIL-C-5015 Series 2
8S
10S,10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
A
15.67
18.64
21.79
24.99
28.24
30.94
34.16
37.29
40.46
50.01
56.36
62.71
B
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
17.83
17.83
17.83
1/2-20 UNF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-1/16-18 UNEF
1-3/16-18 UNEF
1-5/16-18 UNEF
1-7/16-18 UNEF
1-3/4-18 UNS
2-18 UNS
2-1/4-16 UN
Connector Shell Size
AMPHENOL 21
ACCESSORIES
S
N
WTHREAD
KNURLVTHREAD
STANDARD FINISH IS CADMIUM OLIVE DRAB FOR OTHER FINISHES CONSULT FACTORY
-10
SHELL SIZESee Dimension Table Below
M85049/34
MIL SPEC
Straight AdapterFor MS3114, MS3124 & MS 3474 Receptacles
8
10
12
14
16
18
20
22
24
SizeCode
F dia+ 0.13-0.02
8.18
11.16
14.33
16.97
20.15
23.12
26.04
29.22
32.39
Smax
20.63
20.63
20.63
20.63
20.63
20.63
23.02
23.02
23.79
N dia+ 0.25- 0.27
12.7
15.47
18.65
21.82
24.62
28.16
30.97
34.14
37.32
Thread UNEF Class2 A
V
5/8/-24
3/4-20
7/8-20
1-20
1-1/8-18
1-1/4-18
1-3/8-18
1-1/2-18
1-5/8-18
W
7/16-28
9/16-24
13/16-24
13/16-20
15/16-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
AMPHENOL 22
ACCESSORIES
A Dia
E CABLE ENTRY
C
Dia
, A
B T
HR
EA
D
8
10
12
14
16
18
20
22
24
28
32
36
Straight Strain ReliefM85049/52-1
W - Cadium, Olive DrabN - Electroless NickelA - Black Anodize
20 N
FINISH
M85049/60-1
SIZE CODESee Dimension Table Below
MIL SPEC
SizeCode MIL-C-26482
Series
8
10
12
14
16
18
20
22
24
MIL-C-5015Crimp
8 S
10S, 10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
For Connector Shell Size (REF)A
max
15.67
18.64
21.79
24.99
28.24
30.93
34.16
37.29
40.46
50.01
56.36
62.71
BThread
Class 2 B
½-20 UNF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20UNEF
1-1/16 -18UNEF
1-3/16 -18UNEF
1-5/16 -18UNEF
1-7/16 -18UNEF
1-3/4 -18UNS
2 -18UNS
2-1/4 -16UNS
C
22.61
25.40
28.57
31.75
38.10
41.27
44.45
47.62
55.54
60.32
69.85
28.57
Max
5.18
7.26
10.56
12.09
15.90
17.93
21.10
24.28
27.47
30.10
31.75
34.92
E Cable Entry
Min
3.17
4.74
7.39
8.91
12.72
13.15
14.75
16.35
17.93
19.05
22.22
23.82
AMPHENOL 23
ACCESSORIES
D THREAD
B
CA
STANDARD FINISH IS CADMIUM OLIVE DRAB FOR OTHER FINISHES CONSULT FACTORY
W - Cadium, Olive DrabN - Electroless NickelA - Black Anodize
FINISH
M85049/60-1
MIL SPEC
SIZE CODESee Dimension Table Below
SizeCode
-8
-10
-12
-14
-16
-18
-20
-22
-24
-28
-32
-36
MIL-C-26482Series 2
M83723 SR I & IIl
8
10
12
14
16
18
20
22
24
Connector Shell SizeA
Dia
15.67
18.64
21.79
24.99
28.24
30.93
34.16
34-28
40.46
50.01
56.36
62.7
MIL-C-5015Crimp
8 S
10S, 10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
B
28.57
28.57
28.57
28.57
28.57
28.57
28.57
28.57
28.57
32.68
36.80
36.80
CDia
13.53
15.36
19.65
21.28
24.46
26.46
30.91
34.41
36.65
43.40
48.74
55.09
DThread
Class2 B
1/2-20UNF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-1/16-18 UNEF
1-3/16-18 UNEF
1-5/16-18 UNEF
1-7/16-18 UNEF
1-3/4-18 UNEF
2-18 UNEF
21/4-16 UNEF
AMPHENOL 24
ACCESSORIES
SERIES - D38999
These are the accessories compatible with connectors according to MIL-C-38999Series 3. The standard finishes of these accessories are Cadmium with olive drabchromate. Other alternate finishes are also available on request.
M85049/14
M85049/33-2 M85049/35
M85049/38
M85049/58 M85049/69
Back Shell
Straight Shield Termination
Straight Adapter
Straight Strain Relief
Plotting Boot Ring
Shrink Boot Adapter
AMPHENOL 25
ACCESSORIES
A DIAMAX.B
MAX.
CTHREAD
Back ShellM85049/14
MIL SPECW - Cadium, Olive DrabN - Electroless NickelA - Black Anodize
M85049/14 1 17 W
FINISH
CONFIGURATION1 - Rotating coupling nut.
SIZE CODESee Dimension Table Below.
9
11
13
15
17
19
21
23
25
M12 x 1.0-0.10R
M15 x 1.0-0.10R
M18 x 1.0-0.10R
M22 x 1.0-0.10R
M25 x 1.0-0.10R
M28 x 1.0-0.10R
M31 x 1.0-0.10R
M34 x 1.0-0.10R
M37 x 1.0-0.10R
A max
21.79
24.99
29.38
32.48
35.71
38.50
41.70
44.90
47.98
B max
16.76
16.76
16.76
16.76
16.76
16.76
16.76
16.76
16.76
M85049 Self Locking OnlySizeCode
CThread
Metric RH Class 6H
AMPHENOL 26
ACCESSORIES
D E
F
C
B A
HOLES FOR SAFETY WIRE(3 EQUALLY SPACED)
Straight Shield TerminationM85049/33
8
10
12
14
16
18
20
22
24
9
11
13
15
17
19
21
23
25
8
10
12
14
16
18
20
22
24
19.05
21.59
25.40
27.94
31.75
35.56
38.10
41.91
43.18
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
28.88
28.88
28.88
28.88
28.88
28.88
28.88
28.88
28.88
8.82
12.65
12.83
16.00
19.31
22.61
25.66
28.71
30.54
6.74
8.72
11.10
14.28
17.45
20.63
23.80
26.57
28.58
8
10
12
14
16
18
20
12
24
CONFIGURATION 1) Straight adapter.2) Straight shield termination3) Straight Shield termination Supplied with M85049/26.2 shield ring
These are accessaries compatible with connectors to MIL-C-55116.The standard finishes of these accessories are Cadmium with olive drab chromate.Other alternate finishes are also available on request.
164-895 Cap for receptacles
164-896 Cap for plug
164-377 Cap for 10 pin Receptacle
AMPHENOL 32
ACCESSORIES
19.71 14.77
164-896
23.50
21
.82
164-895
100 chain length
19.71
18
.30
127 chain length
17.34
26.30
28
.88
Accessories
Cap and chain
These cap and chain assemblies are used with 5 and 6 pin connectors as protective covers givingadditional protection against moisture, dust and sand. The caps are manufactured from aluminumand black anodized The chain is manufactured from. stainless steel and is passivated
ForConnector
PartNumber
164-895
164-896
164-183
164-229
All Dimensions are in mm
Cap and chain for ten pin waterproof audio receptacles (U-79 / U)Part No. 164-377
Special accessoriesPlease contact factory with specifications and drawings. Amphetronix has in-house capability to meet and custom build your special accessoriesrequirements for circular connectors.
Notice : All information, including illustrations given herein is believed to be accurate at the time printing. In Lieu of design advances. Amphenol reserves the right to change specifications without notice. This publication ACR 91/00-01 supersedes all existing Amphenol literature on backshells & accessories for circular connectors.
