Background: G Renee Managemen Corporation is a privately held engineering consulting firm located in Coconut Grove, Fl specializing in the design and development of custom high performance embedded electronic and mechanical systems and products. We consist of a team of design partners that have designed everything from focus 1M gate FPGA based ion beam deflection systems to ultra low-power high performance analog ASICs and sensors for NASA's Mars Rover robotic system. Over 80% of our design partners are experienced electrical engineers and computer scientists at the masters and PhD education levels each with over 15 years of design experience in one more of the following areas. Hardware Design Capabilities: • GPS/GPRS Embedded System Design • Microprocessors & Microcontroller Design • Analog / Digital Circuit Design • Analog RF/Wireless Circuit Design • High Speed Digital Design (FPGA, DSP) • Digital Signal Processing • PCB Design, Layout (28 layers) and assembly Software Development Capabilities: • Communication Algorithm Development • Audio and Video Signal Processing • QNX, Linux, Android, Driver Development • Real-time Software Development Mechanical Design Capabilities: • Design for manufacture (DFM) • Prototype Development • 3D CAD Solid Models • 2D Detailed Drawings • Reverse Engineering
Transcript
Background:
G Renee Managemen Corporation is a privately held engineering consulting firm located in Coconut Grove, Fl specializing in the design and development of custom high performance embedded electronic and mechanical systems and products. We consist of a team of design partners that have designed everything from focus 1M gate FPGA based ion beam deflection systems to ultra low-power high performance analog ASICs and sensors for NASA's Mars Rover robotic system. Over 80% of our design partners are experienced electrical engineers and computer scientists at the masters and PhD education levels each with over 15 years of design experience in one more of the following areas.
Hardware Design Capabilities:• GPS/GPRS Embedded System Design• Microprocessors & Microcontroller Design• Analog / Digital Circuit Design
• Analog RF/Wireless Circuit Design• High Speed Digital Design (FPGA, DSP)• Digital Signal Processing• PCB Design, Layout (28 layers) and assembly
Software Development Capabilities:
• Communication Algorithm Development• Audio and Video Signal Processing
• QNX, Linux, Android, Driver Development• Real-time Software Development
Mechanical Design Capabilities:
• Design for manufacture (DFM)• Prototype Development
• 3D CAD Solid Models• 2D Detailed Drawings• Reverse Engineering
Core Engineering Team:
Hardware Engineer - BS, MS Electrical Engineering• Former Adjunct Professor of Electrical Engineering
Rochester Institute of Technology• 20 years circuit design and development, firmware and driver
development C/C++ assembly language
Hardware Engineer BS, MS, PhD Electrical Engineering• Former Professor of Robotics at University of Maryland• Expert in EMC, Wireless, RFID, Telecom, NEBS performance
testing
Software Engineer BS, MS, PhD. Electrical Engineering• Former Professor of Electrical Engineering Rochester
Institute of Technology• 20 years of engineer communication design experience• Communication algorithm development• Image and audio processing
ASIC Engineer BS, MS, PhD Electrical Engineering• Over 20 years of experience design and development analog
and mix-signal ASICs for space applications.
Analog Engineer BS, MS Electrical Engineering • 20 years analog/digital circuit and RF design
PCB Enginner BS, MS Electrical Engineering• 20 years schematic design and PCB layout• Expert in using Orcad, Pads, Altium and Allegro tools
Processor Design Experience:
GRM has successfully completed many board level and embedded system designs using many of the popular microprocessors and controllers that are currently available in the market place. Below is a partial listing of the various processors we’ve worked with. PCBA
Under this model the customer provides us with desired functionality requirement of the product and the specifications of the product enclosure. We design the complete circuitry from Schematic and provide manufacturing of the electronics from protos and mass production. In addition, we also do the Android porting and provide the relevant drivers.Hardware platform Supported:
a) TI-OMAP 4430/4460/4470b) Samsung Exynos 4412/5250/5410c) Qualcomm MSM8660
We offer full spectrum of Mechanical Design Services including:
Our objective is to provide with state of the art 3D CAD Solid Models and ManufacturingDrawings so that your mechanical ideas can come to life! With over 20 years of experience in the Design of Machined and Fabricated Sheet Metal parts and assemblies that are used inindustries ranging from Medical, Dental, Telecom, Electronics and the Military.
• Reverse Engineering• Design for Manufacture
• Manufacturing Documentation • Prototype and Product
Development
Military Remote Sensor
Telecom Chassis
18 Gigabit Video Processor
IR Core Mount
Mechanical Design: con’t
Video Processor:
2D Drawing for 16 Gigabit Video processing and transceiver System.
