Date post: | 03-Aug-2015 |
Category: |
Business |
Upload: | indiamart-intermesh-limited |
View: | 525 times |
Download: | 2 times |
BALAJI
ENTERPRIsES
Project Material Suppliers/Contractor
INDEX Sr. No Material Page No
PROFILE 3-4
1 AUTOMATION 5
2 GLASSWOOL 6
3 FRP GRATINGS & COVERS 7-8
4 ACTIVE CARBON 9-11
5 PEBBELS 12
6 PP BALLS 13-14
7 CABLE TRAY 15-18
8 TRANSMISSION LINE TOWER 19
9 GUARD RAILS 20-21
10 GARTINGS 22
11 INDUSTRIAL PAINT 23-24
12 POLYUREA 25-27
13 FIRE PROOF 28-30
14 CABLE COATING 31-35
15 FIRE PROOF BOARD 36-38
16 FIBERGLASS TISSUE 39
17 TRANSFORMER 40
18 POWER/CONTROL/FIRE PROOF CABLES 41-42
19 CABLE JOINTKIT AND ACCESSORIES 43-48
20 STOP/GATE/GLOBE/ELECTRIC VALVE 49-50
21 ELASTOMERIC NITRILE RUBBER INSULATION 51
22 CANVAS 52
23 CHEMICAL 53-56
24 WIRE MESH 57
25 TUNDISH 58
26 SHEAR BOLT 59-63
27 OUR PROFESSIONALS 64
28 COMPANY PROFILE 65
29 CONTACT 66
Project Material Suppliers/contractor
Profile
Established in the year 2007, we, “Balaji Enterprises”, are one of the prominent
manufacturers, exporters, wholesalers, retailers and traders of different types of industrial
products. Our products harness solar energy for use and find application in varioSus domestic
and industrial sectors.
We procure quality raw material from reliable vendors of the market, have sophisticated
infrastructure and expert professional that have enabled us to produce superior quality goods.
Our range is stringently checked on the basis of well defined parameters like insulation, high
voltage, performance and ground integrity. We have a wide distribution channel in the Indian
Subcontinent and ensure quick order processing to our clients. Our esteemed clients include
L&T, GDCL, Simplex, Adani and Vedanta.
The strategic implementation of plans and business skills of our mentor, 'Mr. Nitin Agarwal'
has enabled us to acquire a diverse clientele in various parts of the country. His role in the
growth of the company is inevitable.
Product Portfolio We are engaged in manufacturing, exporting, wholesaling, retailing and trading a wide range of
industrial goods. Our range encompasses some common features such as chemical resistance,
sensitivity, voltage balance, dielectric properties and many more.
The quality range of industrial goods that we offer includes :
Polystyrene Black / Sheets Polypropylene Ball
Glasswool/Rockwool
Barley / Fish Paper
UPVC, CPVC, PPH Pipe and Fittings
Glass Wool / Ceramic Fibre Blanket / Fibre Glass Fabric
Rubber Sheets/ Polyester Fiber Air Filter
Shear Stud / Safety Net / Chain Pulley Block, Lab Chemicals/Industrial Chemicals
Explosion Proof /Bullet proof Glass
Wire Rope
Power Cables(LT, HT, XLPE)
3
Paints/Greases
Welding Cables
Machine Tools
Poles,Oil
Safety Net
Neopreme rubber sheet
Insulationmaterial(ceramic fiber blanket)
Canvas cloth
FRP Gratings
FRP Ducting
Alloy Register
Daylight Nature
Gratings
Cable Tray
Cable Ties/Gland
Active carbon
Application jobs are also performed by us like:
Polyurea
Erection
Painting
4
Wire Rope/ Welding Cables / Rubber Sheets /Barley / Fish Paper / UPVC, CPVC, PPH Pipe
AUTO SLIDING / SWING /CURVE / REVOLVING DOORS
• Automatic Doors offer a cost effective solution to Prevent Cooling Losses in all Verticals.
• Available in Frameless / Aluminium Sections / Wooden Puff and Metal Doors
• Revolving doors available in 2/3 /4 Wings
• Automatic Swing Doors available in single and Double Leaf AUTOMATIC SLIDING / SWING GATES
• Sliding Gate Motors Available from 350 KG to 4000 KG
• Swing Gate Motors Available up to 5 Mtr leaf Length and 500 Kg Weight
• For usage in Residential / Commercial and Industrial Entries
• The Motor Have Heavy Intensive Duty Cycle and can be used in any environmental Conditions.
• Also Available Retractable and Telescopic Gates
• Retractable Gates : SS 304 size ( Max 9 Mtr x 1.5 Mtr )
• Fabrication of gate of different design BOOM BARRIERS
• Recommended to be install at Residential / Public / Industrial and Commercial Entrance and Exit Points to
Restrict unwanted Entry.
• Also Available for TOLL PLAZA APPLICATION
• Telescopic Arm Barriers for Application where there is a constraint of lintel height
• Αvailable with Long and Short Range Readers
• Complete Automatic Parking Solution for Pay and Park Solution . Sizes Available 2 Mtr to 8 Mtr
ROAD BLOCKER
• Road Blockers are designed to be installed at Entrance of High Security Zone / Areas
• Αlso it can Stop Vehicles of Very High Tonnage.
• Available in Size from 3 to 5 Mtr and height Available 60 / 80 / 100 CM
5
AUTOMATION
• In Case of power failure it can be lowered with Manual Hand Pump
Glass Wool made from pure silica sand will not support combustion even in direct, prolonged
contact with flames. It emits no toxic fumes or smoke, the two biggest hazards to health and
life in the event of a fire. Glass wool is a complete fire safe product complying the following
standards:
Environmental Performance
Glass wool is one of the most environmentally friendly, stable and sustainable insulants
available. Its raw material is silica sand, the earth’s most abundantly occurring natural
material. And its impacton the environment in manufacture, use and disposal is minimal. Zero Ozone Depleting Potential
Minimum VOC
Uses abundant and renewable raw materials.
Temperature Range
Glasswool is suitable for applications ranging from minus 1950 C to 2300 C. For special
applications upto 4500C, high temperature binder is available. Aluminum foil facing is suitable
upto 1200C.
Chemical Stability Glasswool is chemically inert. Application does not cause or accelerate corrosion. Glasswool is rot proof and odourless. Conforms to IS 3144.Shot content is nil, exceeding requirements of IS 3144 / BS 2972
No Mould growth. Conforms to IS 3144.
Moisture content and water absorption is less than 2% in accordance with IS 3144 / BS 2972 Glasswool superior tensile strength, handleability, resilience, low thermal conductivity,
relatively high THERMAL RESISTANCE (R Value) along with its superior Fire safe
properties (Non combustible) and excellent noise reduction properties makes it suitable for a
wide variety of thermal & acoustic insulation applications ranging from HVAC, metal roof and building insulation to applications in solar collectors and generator acoustic enclosures &
isrecommended for use both in hot & cold application ranging in temperature from -195degrees
toplus 450 degrees centigrade. As insulation repels moisture and it contains nothing organic to
support micro organisms, it won't sustain rot, fungi or bacteri
6
Glasswool/loose
Glasswool
FRP COVERS
Gully covers and gratings serving the purpose
of load bearing and waterflow."
FRP Manhole Covers are free from the fear of theft, as this material cannot be sold on weight basis & is non re-processable.
• FRP Manhole Covers are easily handleable without
risk of injury.
• FRP Manhole Covers are lightweight and can be handled
by a single person during maintenance & cleaning of the
drains.
• FRP Manhole Covers are corrosion resistant and are not
affected by sewage, Chemical, & sea water hence they do
not rust.
• FRP Manhole Covers have a long service life.
• FRP Manhole Covers are high on aesthetics & can be
offered in various colours.
• The top structure of FRP Manhole Covers is highly
abrasion resistant, which makes it highly effective as an
ideal usage on roads & highways.
• FRP Manhole Covers are available with locking
arrangement, to avoid displacement of the same in case
of water back pressure in low lying regions .
• FRP Manhole Covers are UV resistant and are not affected
due to sunlight.
Considering the superior properties and the advantages
over the DI/CI/RCC Manhole Covers, FRP Manhole
Covers is the most cost effective and technically superior product to replace & eliminate the problems faced with
the existing DI/CI/RCC Manhole Covers.
7
FRP MANHOLE COVERS
We offer gratings which are made of FRP high quality materials. Other than the load bearing
there are many advantages of these covers as water can easily flow through it (more than
50% opening) and it does not allow water logging.
They have been thoroughly load tested as per BS EN 124 1994 & AASHTO M306 standards for
drainage and utility services. They meet all the requirements of the code. The fire resistance is
tested in accordance with ASTM E-84 tunnel test method.
8
FRP GRATINGS
Activated Carbon is a Microporous material manufactured from carbonaceous raw material i.e. Wood,
Coconut Shell, Rice Husk, etc. The activation process develops a myraid of pores of molecular dimensious within the carbon which together constitutes an enormous internal surface area. The carbon atoms at the
internal surface of Activated Carbon exert an alfraction on the molecules of the surrounding gases and
liquids. The Strength of this force is related to the molecular structure of the surrounding medium. This is
the mechanism by which Activated Carbon can be used to remove different components from a mixture.
Activated carbons are used as purifying and decolouring agents in a wide range of process and they
absorb between 10% to 90% of their own weight of impurities from aquereous solution. Activated Carbon is added to the process liquor in an agitated vessel and filtered off after the required contact time.
Activated Carbon are of Two Type POWDERED ACTIVATED CARBON & GRANULAR ACTIVATED CARBON
Different type of Powdered Activated carbon are available for use in different industries depending upon their industrial requirement as to METHYLENE BLUE adsorption, ASH Contents, IRON contents,
CHLORIDE Contents, ACID Solubles etc. Granular Activated Carbon is used for Effluent and Water Treatment and fifferent grades are identified by its lodine Value.
RAW Material :
Silicon’s Activated Carbon is made from Charcoals of Pine Wood, Eucalyptus Wood and Coconut Shell depending upon the requirement of the user. Pine wood and Eucalyptus wood based charcoals are soft
and have a high degree of Porosity and therefore give better activation. I.e. More Methylene Blue adsorbtion, while those made from Coconut Shell charcoals have advantage of being hard and hence
there is less abrasion.
Applications
Water Treatment (Potable, Process and Waste Water) Food Industry Pharmaceutical industry Chemical industry Gas & Air purification Medicines
9
ACTIVE CARBON
TEST SP SP (U)
SP (U-1)
SP (U-2)
SP (U-3)
SP (U-4)
SP (U-5)
SP (U-6)
SP (U- 7)
SP (U- 8)
Methylene Blue mg/g 100 150 180 240 270 300 340 360 400 450
KMnO4 % min 25 35 40 45 60 70 75 80 85 90
Iron ppm max 1000 800 600 600 600 600 600 600 600 600
Acid Solubles %max 12 10 5 5 5 5 5 5 5 5
Water Solubles % max - - - 1 to 4 1 to 4 1 to 4 1 to 4 1 to 4 1 to 4 1 to 4
pH 10 10 10 7 Adjustable between 7 to 11
Moisture % max 11 11 11 10 10 10 10 10 10 10
Granular Activated Carbon is produced from anycarbonaceous material like Eucalyptus, Saw dust, Rice
Husk, Coal, Wood, Lignite and Coconut Shell but our Granular Activated Carbon is manufactured only from
Coconut Shell only, it is hard compared with other carbon and has a higher surface area. It gives more
adsorption capacity due to its microporous structure and superior hardness.
Application of Granular Activated Carbon
l Effluent Treatment Plant
l Waste Water Treatment for Reduction in the level of BOD & COD.
l Catalyst in Chemical-Metallurgical Industries & Petroleum Industry. l Swimming Pools & Soft Drinks
Plant for Dechlorination.
l Purification of Drinking Water & Industrial Gases. l Solvent & Gold Recovery.
l Absorption of Dissolved Organic Matter.
l Water and Gas Mask Filter. l Breweries and Distilleries
10
Specification of Granular Activated Carbon
Appearance Black Granules
Particle Size Any sieve size 4/8, 8/16, 12/30, 4/16, 8/30, 16/30
Iodine Adsorptionmg/gm
500 +/- 25
750 +/- 25
850 +/- 25
950 +/- 50
1100 +/- 50
pH 9 to 10 9 to 10 9 to 10 9 to 10 9 to 10
Moisture % 5 5 5 5 5
Total Surface area sq.mtrs./gm
500 750 950 950 1100
Bulk Density gm/cc 0.55 +/- 0.05
0.53 +/0.05
0.51 +/0.0
0.50 +/0.05
0.48 +/0.05
Ball pan Hardnessno. 90 85 80 80 70
Ash Content% 5% Max 5% Max 5% Max 5% Max 5% Max
11
ACTIVATED GRANULAR CARBON
Based on the belief that we carry black or white pebbles with us, depending on the choices we make in our lives (black
pebbles represent self-focused, irresponsible decisions; white pebbles represent a life of sound, ethical choices), the
White Pebble "was founded to offer an ethical choice for everyday living." Purchasing sustainable clothing is not only
beneficial to you, but, White Pebble believes, also benefits people all along the chain, both physically and
spiritually.HT Naturals, Del Forte Denim, and Of The Earth are a few of the labels you'll find at The White
Pebble. Items range in price from $22 for a basic tee to almost $200 for womens jeans. Currently all baby items are
on sale for 20% off, including sale items. Shipping is free on orders over $100. The White Pebble uses 100% recycled
hang-tags with soy-based inks and gift boxes made from 100% recycled cardboard.
12
PEBBLES
Description of PP
Main Application: T30S is general resin, which can be applied in injection molding, extrusion molding,
thin wire and monofilament making, etc., it's wildly used in making sorts of civil-
using plastic products, electrical equipments' hull & parts, insulations, food &
medicine packagings, transportation & building materials, plastic bags, textiles, and
so on.
Main Features: ①Non-toxic, odorless, tasteless, low density(0.90-0.91g/cm3), it's the
lightest in the FOUR thermoplastic resins.
②All index-es are better than national standard(GB12670-90).
③W ith kinds of additive appended, so quality is stable, shelf life is long,
processability is good.
④Thermoplasticity is good, easy to be machine-shaped, and completed
products are with smooth surface, good air & water permeability.
⑤Mechanical properties are good, so completed products are with good
hardness, abrasion resistance, SCR and extensibility.
⑥W ith good heat resistance and high softening point, can be long-time
used in 100-120℃.
⑦W ith good chemical properties, and not occur with most of the role of
chemicals.
⑧W ith good dielectric properties, especially high-frequency insulation.
Announcements: ①Material should be kept indoor with shady, cool, air and dry, it's better not
to store it over 12 months.
②Completed products are not available for filling with fuming sulphuric acid,
fuming nitric acid, chromic acid solution, halogen, benzene, carbon
tetrachloride, chloroform, etc.
③Material is non-dangerous goods, it should be transported with cover to
avoid sun, rain or wet. And it's forbidden to be co-stored and mix-carried
with inflammable, explosives, toxic articles, soilable products, etc.
13
PP BALLS
PP COVERING BALLS’ PROPERTIES 1. Physical Properties:
① Density: 0.9~0.91 g/cm3
② Compression Strength: 0.4Mpa
③ Working Temperature: 100 ℃
④ Bulk Specific Weight: 110 Kg/m3
⑤ Covering Rate: 97%(winged) 91%(non-winged & hollow )
⑥ Voidage: 9.3%(winged) 9.5%(non-winged & hollow)
2. Chemical Properties: ① Hygroscopicity Resistance
② Acid & Alkali Corrosion Resistance
③ Dissolubility Resistance
④ No Resistance to Sundex Solvent (e.g. Benzene)
⑤ No Resistance to Chlorinated Hydrocarbon Solvent
⑥ No Resistance to Oxidizability under High Temperature
14
Cable tray system is used to support insulated electric cables used for power distribution and
communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are
commonly used for cable management in commercial and industrial construction.
Cable trays are prepared from galvanized steel, aluminium, or glass fibre reinforced plastic. Every
material chosen for given application is on the basis of corrosion resistance required, as per clients
requirement. Several types of trays are used for different applications
A solid bottom tray provides maximum protection to cables, but requires cutting the tray or using fitting to
enter and exit cables.
A deep, solid enclosure for cables is called cable channel or cable trough.
A ventilated tray has opening in bottom of the tray, allowing some air circulation around the cables,
water drainage and allowing some dust to fall through the tray. Small cables may exit the try
through ventilated
openings.
15
CABLE TRAY
Indiana designs and manufactures Ladder Type Cable Trays for various industries. The ladder type cable
trays are made available in different sizes with variety of materials and finishes.
The ladder type cable trays are fabricated / manufactured in mild steel, stainless, steel, Aluminium, FRP,
GRP and also can be provided in pre-galvanized steel, hot dip galvanized, enamel painted or powder
coated
We can manufacture ladder type cable trays of up to 6000mm in length
The accessories including bends (horizontal, vertical, inside and outside), reducers, crosses, tees, clamps,
connecting pieces, slotted angles for support of the tray are all also available.
Customers also have the option of customized cable trays. We also manufacture perforated type
cable trays, wire mesh type cable trays, aluminium trays, frp cable trays, special supporting systems,
cable race ways and trunking.
Generally, mild steel cable trays are used in all types of plants.
Aluminium Trays are used in Petrochemical plants, Chemical plants, Paper mills and marine environment
Stainless Steel Trays are used in other corrosive environments but Fibre Glass Reinforced Plastics
(FRP) Cable Trays are recommended in corrosive environment.
We follow the metric as well as imperial system
16
LADDER TYPE CABLE TRAYS
Channel cable tray consists of a one-piece, ventilated or solid bottom channel section, designed for use
with a single power cable or multiple control or signal circuit cables.
Channel Cable Tray Provides :
an economical support for cable drops and branch cable runs from the backbone cable
tray system. standard widths of 3, 4, and 6 inches in metal systems and up to 8 inches
in nonmetallic systems.
standard depths of 1¼-1¾ inches in metal systems and 1, 1 1/8, 1 5/" and 2 3/16 inches in nonmetallic
systems
standard length of 10, 12, 20 and 24 feet
Channel cable tray is used for installations with limited numbers of tray cable when conduit is
undesirable. Support frequency with short to medium support spans of 5 to 10 feet.
17
CHANNEL CABLE TRAY
Indiana designs and manufactures Perforated Type Cable Trays for various industries. The perforated cable
trays are made available in different sizes with a variety of materials and finishes.
The perforated cable trays are fabricated / manufactured in mild steel, stainless steel, aluminium, FRP,
GRP and also can be provided in pre-galvanized steel, hot dip galvanized, enamel painted (delete
spaces here) or powder coated
We can manufacture perforated cable trays of up to 6000mm / 20 Feet In length
The accessories including bends (horizontal, vertical, inside and outside), reducers, crosses, tees,
clamps, connecting pieces, slotted angles for support of the tray are all also available
Standard cable trays can be ordered and supplied and it can also be as per the project
specifications.
We also manufacture ladder type cable trays, wire mesh type, aluminium trays, FRP cable trays,
special supporting systems, cable race ways & trunking.
Generally, mild steel cable trays are used in all types of plants.
Aluminium Trays are used in Petrochemical plants, Chemical plants, Paper mills and marine
environment
Stainless Steel Trays are used in other corrosive environments but Fibre Glass Reinforced Plastics
(FRP) Cable Trays are recommended in corrosive environment.
We follow the metric as well as imperial system.
Cable Trays Accessories
The cable trays accessories including bends (horizontal, vertical, inside and outside), reducers,
crosses, tees, clamps, connecting pieces, slotted angles for support of the tray are all also available.
straight ladder horizontal elbow horizontal tee horizontal cross horizontal reducer vertical elbow up / inside vertical elbow down / outside coupler plate Accessories
clamp, coupler plate, joint fitting, cross strap, side angle joint fitting, spring nut, l clamp, gusset
fitting, shoulder fitting, angular plate, floor plate rd, floor plate ld, lattice plate
18
PERFORATED TYPE CABLE TRAYS
We hold expertise in the designing and fabrication of transmission tower that are successful in serving the requirements of electrical industries. These transmission towers are manufactured as per the design requirements of our clients and are subjected to rigid quality tests to ensure zero defects and optimum functionality. We also offer these transmission towers as per the customized requirements of our clients.
We are providing Transmission Line Towers to our customers.
Our Strength:
A High Quality, Trained Technical Staff and Personnel
High Customer Retention Rate
Producing Quality Products at Competitive Rates Ensuring
Timely Deliveries
19
TRANSMISSION LINE TOWERS
We are offering our clients with robustly constructed guard rails that are ideal for using as traffic safety systems in highways. Countering the problem of high percentage of heavy vehicles on highways, these guard rails are installed to reduce the severity of run-off-road accidents. These guard rails are functional by redirecting a vehicle away from embankment slopes or fixed objects and dissipating the energy of the errant vehicle. Widely used on all types of roads, particularly embankment, close to cliffs, bridges and canals. These guard rails prevent the vehicles from leaving the road or from crossing on to the other carriageway. Providing elasticity & deferability for absorbing and dissipating the energy induced by impact with the vehicle, the metallic structure of guardrails act as median barriers on roads
The components of Guard Rail Systems are mentioned below:
W Beam
Cold roll formed section
3mm/2.7mm thick HR sheet.
Fe 410/360 grade steel conforming to IS 5986 or IS 10748 or equivalent
Hot dip galvanised - 550 gms/m2 or 460 gms/m2 conforming to MORT&H (Ministry of Road Transport
& Highways) AASHTO M180 and IS
Yield Strength: 240-310 N/mm2
Tensile Strength: 410-490 N/mm2
Elongation: 15-25%Post
Anchored to foundation on Ground & Bridges
Channel section of 75x150x75x5mm
5mm thick HR sheet
20
GUARD RAILS
Fe 410/360 grade steel conforming to IS 5986 or IS 10748 or IS 2062 or equivalent
23
Hot dip galvanised -550 gms/m2 or 610 gms/m2 conforming to MORT&H (Ministry of Road Transport
& Highways) AASHTO M180 and IS
Spacer Buffer between Post & W-Beam
Channel section of 150x75x5mm.
5mm thick HR sheet
Fe 410/360 grade steel conforming to IS 5986 or IS 10748 or IS 2062 or equivalent
Hot dip galvanised -550 gms/m2 or 610 gms/m2 conforming to MORT&H (Ministry of Road Transport
& Highways) AASHTO M180 and IS
End Section Anglised, Fish Tail or Tubular end terminals
Fasteners
Hot dip galvanised or electro galvanised bolts, nuts and washers conforming to IS 1367 of grade 4.6 MS
16mm dia Button head bolts for W-beam to W-beam & W-beam to spacer connection
16mm dia hexagonal head type bolts for spacer to post connection
Mines and collieries where continuous movement of vehicles is envisaged
Our guard rails find extensive application in the following areas:
National highways, expressways, bridges and flyovers
Motor racing/test drive tracks
Crash test sites
Factory areas
Traffic safety in airports
Plants handling hazardous chemicals
21
Grating is a regularly spaced collection of essentially identical, parallel, elongated elements,Grating creates a mesh
within the frame bar by laying one set perpendicular to another set.
Grating is the most important production element from our manufacturing unit, our gratings have some magnificent features within, such as it is light in weight, good strength, large carrying capacity, cost effective. gratings offer good ventilation, easy clean and easy installation. Gratings have number of applications, this product is basically designed for civil constructions in city road, garden,
yard, airport and railways.
For long life of gratings, can be hot -dip galvanized , it is a treatment providing rust proofing and maintenance
free replacement, thus gratings can stay hygienic, clean and bright finish.
High strength, a very important factor which our gratings consist, measures the toughness, durability of the product.
Gratings are made from various material for different applications, the most common being mild steel, our
gratings are made from MS confirming to IS 2062 GR A / ASTM A36
For chemical plants, highly corrosive environment, high temperature zones, we recommend SS gratings made from 304,
316, 316L, before delivery they are acid cleaned and electro polished.
For acid, alkalis, oil & marine applications we recommend frp gratings
22
GRATINGS
Mum Protection, Mum Maintenance FOR: STRUCTURAL PIPELINES OFFSHORE DRILLING REFINING STORAGE TANKS EQUIPMENTS MACHINERIE
BE introduced range of High Performance Protective Coatings for Chemical, Marine and Highly
corrosive environments. Over the past few years experience these Protective coatings systems have
proven themselves at several Industria l like Power, Steel, Petrochemicals , Engineer
ing,Pharmaceuticals, Chemicals Plant, Food & Beverages, Bridges & Ports, Textiles, Sugar Industries,
Automotive sector, Fertilizers, Pipe Companies etc
BE’s High Performance Protective coatings are formulated to suit tropical and industrial conditions,
offering the very best high build protection film as well as aesthetic appearance. BE also pr technical
recommendations for protection of your steel, concrete s increase service life of substrate. BE provide
the right paint syst to suit your application. We cover entire range of HPPC ( High peprotective
coatings) products along with following specialised products.
• Glass Flake Epoxy Primers and Topcoats
• Surface Tolerant, Self Priming, High Build Coatings
• Water Based Epoxy and Polyurethane Coatings
• Novalac Epoxy High Build Coatings
• Self Leveling Floor Coatings
• Polysulphide & Epoxy Sealant, Grouts, Mortars
A acrylic water based exterior reinforced with powerful biocides and fungicides. Our Brand specially
designed for exterior durability Its unique technology ensures easy application, bright and non-fading
colors and against fungal and algal growth. In effect, it will give your surface a long l protective and
beautiful look. ensures excellent water resistanc resistance to weather. This ensures super-adhesion
23
INDUSTRIAL PAINT
with different type of msurfaces. A proven exterior coating system for decorating, restoring and pro
layer even for extreme climatic conditions.provides good abrasi impact resistance. A special osmotic
property of its paint film make it imperv heavy wind-driven rain. Its uniform finish appearance looks
like luxury surf years.
Success of paint system depends on following parameters
• Surface preparation methods
• Selection of coating system
• Skilled application engineers • Application & inspection
24
Product Description Kempolyurea 5556 is a two component,100% solid,zero VOC,polyurea developed for long term immersion
in water,waste water & sewage applications.It has outstanding physical properties & excellent microbial
resistance.It can be applied on concrete or metal surfaces over primer kempolyurea P.This polyurea
elastomer is user friendly,has excellent chemical resistance,thermal stability & fast drying properties. INTENDED USES
Food processing plants,cold storage,waste water treatment plant,industrial facilities,airport hangers,parking decks,etc.
PRODUCT INFORMATION
Chemical Base : Aromatic Polyurea
Colour : Off white/Grey/Black
Volume Solids : 98±2 %
Typical : As per surface & requirement
Thickness
Practical : Consider appropriate loss factors
Coverage Drying Time @ 30˚C (83˚F) Touch Dry : 30 sec Hard Dry : < 10 mins Overcoating : Min. 10 mins Interval : Max. 3 hrs Flash Point : Above 90˚C VOC : zero VOC
PERFORMANCE DATA
Abrasion Resistance : < 15 mg loss
Elongation : > 350% Shore
D hardness : > 40
25
POLYUREA AROMATIC POLYUREA
Tear Strength : > 350 PLI Water Absorption : < 1%
REQUIREMENTS
Application Equipment : Brush/Roller
APPLICATION PROCEDURE
Preparatory work as under - Concrete: It should be dry, sand blasted or hydro blasted and concrete should be allowed to cure for min 30 days. Steel: Should be free from oil, grease, paint, coating abrade entire surface by steel blast or sand blasting, install KemPolyurea P as primer.
Application of first coat is recommended to be done by brushing for better wetting of the surface. For brushing, use a short bristle brush for working the material into all irregularities. On short edges, bolt
UREATHANE PRIMER
PRODUCT DESCRIPTION
KemPolyurea P is a two component, 100% solid, zero VOC, solvent free, a low viscosity primer, This is used as primer for polyurea & polyurethane products. It has outstanding bonding properties ideal as a primer for concrete, steel surfaces. This primer is user friendly & has fast drying properties.
INTENDED USES
As a primer for polyurea & polyurethane products. PRODUCT INFORMATION
Chemical Base : Polyurethane Primer Colour : Off White Volume Solids : 98±2 %
Typical : As per surface & requirement Thickness
Th. Coverage : 8 to 10 m2/lit Practical : Consider appropriate loss factors Coverage
Drying Time @ 30˚C (83˚F)
Touch Dry : 1-2 hrs
Hard Dry : 2 hrs Overcoating : Min. 2 hrs Interval :Max. Overnight Flash Point : Above 90˚C
VOC : zero VOC
PERFORMANCE DATA
Elongation : > 95% Shore D hardness : > 50 Tensile Strength : > 1400 psi
26
REQUIREMENTS
Application Equipment : Brush/Roller APPLICATION PROCEDURE
Preparatory work as under - Concrete: It should be dry, sand blasted or hydro blasted and concrete should be allowed to cure for min 30 days. Steel: Should be free from oil, grease, paint, coating abrade entire surface by steel blast or sand blasting, install KemPolyurea P as primer.
Application of first coat is recommended to be done by brushing for better wetting of the surface. For brushing, use a short bristle brush for working the material into all irregularities. On short edges, bolt heads, flanges etc. application of a stripe coat will assure freedom from skips or holidays.Do not apply when temperature falls below 10 oC or when relative humidity rises above 90% or during rain, fog or mist.
Mixing Ratio : 2:1 by Wt
Pot Life : 30 mins
TYPICAL SYSTEMS
Primer Intermediate Top Coat
KemPolyurea P - KemPolyurea 5556 SAFETY CONSIDERATIONS
Please refer to the separate Material Safety Data Sheet available with detailed information. FURTHER INFORMATION
Please consult our Technical Advisors for any technical assistance.
PACK SIZE 30 Kg Base (Part A) 20 Kg Hardener (Part B) 10 Kg STORAGE
Shelf Life 6 months at 25˚C. Store in dry, shaded
conditions away from heat sources. DISCLAIMER
The information given is not intended to guarantee any particular properties or claims. Therefore, unless we specifically agree in writing, we do not accept any liability whatsoever or howsoever arising for the performance of product or for any loss or damage arising from use of product. The users must satisfy themselves that there are no circumstances requiring additional information or precautions or the verification of details given herein. The information in the sheet is
liable to modification or change based on our policy of product development.
27
.
Technical Data Sheet
ORGANIC FIRE RETARDANT STUFFING FIRE RETARDANT STUFFING is a dry mortar mix with controlled swelling effect to provide a non-shrinking, homogeneous
and smoke gas-tight fire
seal free of cracks for cable penetrations.
Composition is a blend of inorganic binders, fillers and lightweight aggregates, interlaced with special additives. Colour red
Bulk density approx. 600 g/l
pH-value approx. 12.3 (at working consistency) Density approx. 0.6
g/cm³ (cured mortar) Compressive strength approx. 0.6 to 0.7
N/mm²
Expansion (20°C/24 h) approx. 3 Vol.-%
Workability max. 240 minutes Complete hardening
approx. 30 days Minimum application temperature +5°C
Cleaning of equipment water Storage temperature -20°C to +40°C
28
ORGANIC FIREPROOF STUFFING
Shelf life in original, closed bags at least 2 years Packaging 25 kg multi-
layer bags with polyethylene lining Organic fire prevention
sealing
Organic fire prevention sealing is a kind of organic polymer materials as the
main ingredient, has a certain plasticity and flexibility, the case of Tan, can form a solid insulating layer of fire
blocking material. For electric power, petroleum, petrochemical, metallurgy, communications, construction
and other industries such as cables and
pipes through holes, cracks in the wall of fire retardant cover with fire-resistant for a long
time, water, oil, corrosion resistance, Fire resistance smoke, anti-small animals Characteristics, and good thermal conductivity. The product is convenient for construction, replacement, change the cable easily, generally with other sealing material (such as inorganic fire blocking materials, fire retardant packages, etc.) used in combination, especially for cable or cable bundles and cable, the cable With other objects blocking the gaps between the fire
Construction Method
1, the first implementation of Fire sealing parts need to clean up dirt, appropriate cables
and clean the surface finishing oil, and dust.
2, type sealing rub evenly, with the right tools to shop (embedded) in the
required plugging the gap. In case of low temperatures, sealing hard, it can be placed in warm water and heat
until soft, then designate construction.
3, sealing large holes, it can fire with the inorganic sealing materials for use.
29
Inorganic fire prevention sealing/stuffing Inorganic fire blocking material is a kind of inorganic material powder as the main ingredient of
solid non-combustible materials, the construction of the water column and
must be better than cure quickly mixed. Used in electric power,petroleum,
petrochemical, metallurgy, communications, construction and other industries through the
holes in the cable fire blocking, and can effectively prevent the penetration and flame retardant. The product has high strength, fire resistance for a long time, corrosion-resistant,
odorless, easy construction, etc.Inorganic fire prevention sealing/stuffing
Construction Method 1, according to the size to be plugging holes, estimate the amount of blocking material.
2, the blocking material and water mixed at the ratio of 1:0.6-0.7, stirring into a uniform
slurry, then immediately use. Construction must be in strict accordance with the gray water ratio 1:0.6-0.7 operation.
3, sealing holes larger, steel frame reinforcement can be used to increase strength. Plugging in the cable hole, and organic fire blocking materials construction, better fire protection.
Storage Method The product powder material to be sealed container or plastic bag, stored in ventilated and dry
place to prevent damp agglomeration affect the results. Storage period of 6 months
30
INORGANIC FIREPROOF STUFFING
As mentioned in the home page we are into the manufacturing and distribution of Fire Retardant Coating – Organic & Inorganic Fire Proof Stuffing, Sealbags, Fire Proof Board, Epoxy, Polyurethane, Puro Acryl, Non-Toxic, Chlorinated Rubber, Stoving & other type of specialized paints, e.g. Fire and Chemical Resistant coatings for Metal, Wood & Civil applications.
The quality of our product matches those of the multinational companies, while the rates are
comparatively lower. Many famous companies like E.I.L, Punj LLoyd, Lloyd Insulations (India) Ltd., Mark
Auto Industries Ltd., CIMMCO Birla Ltd., Naveen Projects Ltd., Josts Engg. Ltd. (Bombay), Bachmann
Industries Ltd., Frick India Ltd., Gallium Industries Ltd., and many more reputed customers are purchasing
paints regularly from us since 1989. Our products have passed all of their quality tests.
A team of highly experienced, qualified and talented paint technologists forms the back bone of our
progress. Our annual manufacturing capacity is 950-1200 tones of paints. Various industrial concerns have
been dealing with us for the last 20 years due to our good quality, timely supply and well established good will.
Being a growing concern we want to spread our wings further. We would be grateful to you if you could form
a part of our new horizon.
These are the standard which we are follows for Fire Retardant Coating – Organic & Inorganic Fire Proof
Stuffing, Cable coating –IS10810 part 50, IS1255-88.
Flexibility test-IEEE-383
Fire resistance test confirm to-IEC331-20 minutes.
Fire propagation test confirm to -IEC322-3, SBNKSS434-1475, IS1081 part-61.
Scratching test confirm-IPSS-1-07-061-94-standard
Cable capacity rating confirm to –IPSS-1-07-061-94, 3% Maximum.
Smock density confirm to ASTM-2843<35%.
31
CABLE COATING
Limiting oxygen index confirm to ASTMD863, 77
Radiation test confirm to, radiation test IEEE383.
Die Electric strength confirm to IPSS-1-07-061-94(3KV-mil).
Flexibility confirm to IS10810 part 50.
Exelitated easing test confirm to IPSS-1-07-061-94.
General Information Coating is a water based, ablative fire protective coating, especially developed
for the fire protection of grouped or bundled electrical cables and for penetration seals. The main function of Coating is to prevent flame propagation along vertical and horizontal cable ways.
Coating will also delay short circuit, whereby circuit integrity depends on the distance of the cables from fire and the incurred temperature. Coating is easily applied by conventional methods such as spray and brush, as well as by hand (see application data).
How does coating work?
Coating protects electrical cables through ablation as opposed to insulation. Energy is consumed or generated to change any material from one condition or state to another. Processes
consuming energy are called “endothermic”. Some materials need large amounts of energy to
decompose or “break down”. A good ablative composition requires a maximum of energy to decompose.
Coating when exposed to fire starts to ablate by chemical and physical reactions, for instance evaporation, chemical cracking, melting - all this is consuming energy (heat) while keeping the cable relatively cool (for a certain length of time, as the process is self- sacrificial). The gases and vapors generated during the ablative process push oxygen away from the surface, dilute flammable gases
preventing them from burning and interrupt the “chain reaction” of fire chemically. After decomposition of all organic components, a solid structure of inorganic components remains offering further protection by insulation.
Fire protection Coating prevents flame propagation on cables, thus keeping a cable fire localized to its source, even if some minor damage to the most exposed cables may be sustained. According to studies by the British CEGB, a fire on vertical cable ways can spread 20 m per minute. Flame spread on KBS coated vertical cables in the 40 minute IEC 332-3 test has been restricted to less than 10 cm. Coating has a LOI value
of 100 (Limiting Oxygen Index).
What is a LOI value of 100? The Limiting Oxygen Index value test, in accordance with ASTM D 2863, determines the percentage of oxygen in a nitrogen/ oxygen mixture at which a material sustains and burns on its own. In this test, which determines the burning characteristics of all plastic materials, the sample is secured in a glass
cylinder – containing a definite gas flow of O2/N2 mixture – ignited with a gas flame. Then the gas flame is removed and the sample is observed for continue burning. Soft PVC, as used for cable jackets, continues to burn at a low 25-30% oxygen content. Teflon, however, sustains burning only at ahigh 90-95% oxygen content.
Coating has a LOI of 100, which means, it does not burn in a 100% oxygen environment. 32
Mechanical Resistance
Coating is tough enough to sustain physical abuse such as walking on coated cable trays.
Ampacity Coating does not affect the current carrying capacity of electrical cables.
Coating is highly flexible Endurance = lifetime of cable
Application to Cable Surface Preparation
A thorough cleaning of cables is not required. However, oil or grease should be removed with dry rags (no solvent). Using a broom or vacuum cleaner to remove heavy layers of dust is sufficient.
Spray Application by spray is done in the conventional way by spraying crosswise. The white of the coating should well cover the colour of the cable jacket. The wet thickness of the coating must be at least 2.5 mm on all exposed sides. For getting at hard to get at places, use an extension nozzle. Where cables are close to wall, stuff mineral wool between cables and wall and coat over. Generally, the required thickness maybe applied in one coat. How ever, where new vertical cables are to be coated, it is
recommended to first apply a thin “fog coat” and let it dry, then apply the final coat. Brush Brushing Coating on all cables requires several coats to build up the required thickness. Again, a thin coat applied first and allowed to dry will aid in building up the required thickness.
Hand Large diameter single cables or bundles may be coated by hand. Again, a thin coat should be allowed to dry before the rest is applied, using both hands like anextruder. To achiever a smooth, even finish, use a wet brush.
Recommended coating thickness on cables: Wet approx. 2.5 mm – resulting in approx. 1.6 mm dry coating.
Coverage at recommended thickness: Approx. 3.0kg/m² for level surface. For grouped cables or cables in trays allow 30% more material considering
Thinning Coating has a water base, but thinning of Coating should not be necessary.
Spray equipment Coating may be applied with a great variety of spray equipment designed for application of high viscosity materials. Good results have been obtained with the following:
33
Airless spray equipment Ultra 1500 Mark V Pressure at gun: 0-200 bar Spray gun orfice:0.9-1.0 (preferably reversible tip)
Conventional spray equipment (with pressure pot) Material pressure: 4-5 bar Pressure at gub: 4 bar Spray gun orifice: minimum 3 mm diameter
Material hose: minimum 3/4” diameter Air supply: compressor capable of delivering 200 I/ min, (tank vol. At least 40 I) 6 bar.
Please note Air supply, air pressure, diameter of material hose as well as minimum orifice opening must be adhered to as recommended. All filters with the equipment must be removed prior to operating with Coating.
Technical Data Composition:
Coating consists of water-based thermoplastic resins, inorganic incombustible fibres, fillers, pigments and various flame retardant chemicals. Coating is free of asbestos and solvents.
Colour: Off-white
Viscosity: Approx. 30, 000 mPas
Density: Approx. 1.26g/ cm³ pH-value: Approx 7.8
Solids: Approx. 70% Limiting
Oxygen Index (LOI): ž95
Toxicity: Non-toxic
Storage Temperature:5-30°C Must be protected from frost!
Shelf-life: In closed original containers at room temperature at least one year.
Packaging: Plastic drums of 50 kg
Drying time: Depending on temperature and humidity To the touch: within 5-6 hours (20 °C/65% RH) Cured: approx. 3 days (20°C/65% RH)
34
Flexibility: PVC cables of 12 mm diameter coated with Coating may be bent to a 3cm radius without cracking.
Thermal conductivity: Wavelength(λ)=0.69WWm⁻ᴵ.K⁻ᴵ at 25°C
Specific resistance: PP = 1.06 . 109 (Ohm . cm) at 23°C /50% RH PP = 4.10 . 105 (Ohm . cm) at 23°C /83% RH
Selection of Tests Caried out as per International Standards
Type of test Standard Result Test Report No.
Flame propagation on DIN 4102 non AM1.6-
78394 coated cables p. 1B1 propagating
Flame propagation on IEC 332-3 passed
AM33E/93 coated cables
Flame spread BS476, p.7 class 1 AM80961
Fire spread BS476, p.6 class 0 AM81506
Flammability test FM3971 Passed AM1X8A7.AM/OC3A.AD
Current carrying capacity - no derating AMGR90.06.44/0.1
Current carrying capacity FM3971 no derating AM0X3D5.AS
Dielectric strength FM3971 - AMNo. 1X8A7.AM/OC3A.AD
Salt water exposure FM3971 - AM0X3D5.AS
FM Approval FM3971 - AMNo. 1X8A7.AM/OC3A.AD
Ageing and weathering - no damage 8764/8543
LOI determination ASTM D2863 100 8764/8543
Dermatology test - no effect Rep. 21.7.2008
Note : The above data, particularly the recommendations for the application and use of our products are based on our knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case to carry out sufficient tests in order to ensure that our products are suitable for the intended processes and applications. Therefore, any liability for such recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence.
35
FIREBOARD ‘FIREBOARD’ Inorganic Flameproof Board is manufactured from selected clean, long inorganic fibers of uniform quality mixed with suitable incombustible binding materials. ‘FIREBOARD’ are very efficient for heat and fire resistance with superior strength at service temperature up to 800°C.
‘FIREBOARD’ can also withstand vibratory and impact loads. ‘FIREBOARD’ contains excellent insulating properties for heat and electric insulation. Besides, ‘FIREBOARD’ have acid, sound and vermin-proof properties too. It is strong and flexible. It is can be cut, drilled and screwed to supporting beams easily. Also molded or cemented to any shape. The SOFT, MEDIUM and HARD GRADES of‘FIREBOARD’ are made to cover the wide applications. The medium grade is standard and is supplied unless otherwise requested. The hard grade is stiff and brittle, is used where rigidity is needed. SIZES : ‘FIREBOARD’ is normally supplied in standard 1m x 1m sheet in thickness 1.5mm , 3mm, 4mm, 5mm, 6mm, 10mm & 12mm. PACKIG ‘FIREBOARD’ are packed into wooden crates of approx. 100/105kgs. No. of sheets in one crate varies according to board thickness as follows
Board thickness in MM No. of sheets per crate
1.5 60
3.0 30
4.0 25
5.0 20
6.0 15
10.0 9
12.0 7
36
FIREBOARD
COMPLIANCE : 1. DGS&D G / MISC / 81C 2. GOST 2850 / 1958 3. DG Ships : 6853 4. BHPV PS – 214 5. OFM No.62 – 020 6. BHEL TP – 21596
7. BHEL Bhopal PS : 2152 – B /11-21525 8. MINISTRY OF DEFENCE Spcn.No. : JSS – 5640 – 4 9. MINISTRY OF DEFENCE Spcn.No. : IND / TC / 2223 10. IS : 7777 Spcn. Under preparation.
STEEL, FERROUS / NON- FERROUS PLANTS • Steel and Aluminum making processes. • Centrifugal casting seals • Induction furnace coil protection • Splash guards • Launder linings/gaskets and syphon/crucible gaskets in aluminum smelters • Roller conveyors for stainless steel strips • Back up insulation for ark furnaces • Bearing seals
CATERING EQUIPMENT • Fuel gas and burner seals • Combustion chamber linings • Heat shield panels
BOILERS AND FURNACES • Bedding layers on floor tiles in boiler house. • Refractory underlining • Damper control heat insulators • Boiler door linings • Gaskets for burners and ducting
GENERAL APPLICATIONS • Lining for ceilings, walls floors • Internal lining of even walls • Heater and furnace linings • Base mat in glassware manufacturing and annealing processes • In textile, paper , sugar & chemical industries
37
• Laboratory equipment • Cement kiln back-up • Filler for metal and clad gaskets • Hatching incubators • Fireproof doors and panels • Fire protection • Air ducting gaskets and air supply thermal insulation • Air conditioning ducts • Gaskets for joining air or hot ducting • Auto clutch facing • For application as heat shielding material
38
FGT series fiberglass tissue is a non-woven felt made od randomly oriented glass fiber distributed in a special binder by a wet-lay process.
Applications:
Serves as a wrap for both underground and overground pipeline systems to counter natural and artificial corrosion.
Suitable for in-situ waterproffing or waterprooding in the form of roofing felt. Benefits:
Serves as both a reinforcement and protection system. Compatible with bitumen,asphalt and coal tar enamels.
FGT
41/10
FGT 45/10 FGT
50/10
Nominal Mass:
Reinforcement
Pitch:
41
g/m2
10
mm
45 g/m2
10 mm
50
g/m2
10
mm
Standard Width: 1000mm,330mm and 200mm.
Minimum Tensile Strenght:Longitudinal-2277 N/m. Transverse-700
N/m
Roll Length :300 meters,500 meters & 1000 meters.
39
FIBERGLASS TISSUE
We are offering wide range of Electrical Transformers of different ratings. We are a Manufacturer and Supplier,
engaged in offering Distribution Transformers ranging from 100 KVA to 5 MVA,
10MVA,15MVA and 20MVA Power Transformer ranging from 5MVA to 10 MVA ,11000 volts to 33000 volts
Features of Distribution Transformer
Features
Designed for trouble-free performance
Design conforms to IS 2026, BS 171, IEC 76 and othe relevant standards
Low power loss and low noise
Designed to withstand electrical impulses,thermal and dynamic stresses
Optimum utilization of active materials for Compactness
Modern manufacturing techniques ensure cost effectiveness and reliability
Features of Power Transformer
Designed for trouble-free erformance
Design conforms to IS 2026, IEC 60076, ANSI and other relevant standards
Low power loss and low noise
Designed to withstand electrical impulses and thermal and dynamic stresses
Optimum utilization of active materials for compactness
Modern manufacturing techniques ensure cost effectiveness and reliability
40
TRANSFORMER
.
Control Cables differ from Power Cables in their application, they are used to carry control signals of low power strength, but can be subjected to severe working temperature conditions like heaters, boilers and can be exposed to oil, chemicals and other solvents.The wide range of control cables offered by us are used for electrical distribution system such as generating stations, sub-stations, industrial applications, indoor outdoor projects. We can also provide the customized range of the control cable as per the specifications, detailed by our clients.
Power Cables (Armoured / Unarmoured –
PVC / XLPE)
We have a wide range of Armoured Cables, Armoured Power Cables, Armoured Electrical Cables, PVC Armoured Cables and XLPE Armoured Cables. XLPE means cross-linked polyethylene or vulcanized polyethylene. The
basic material is low density polyethylene. Polyethylene is a thermoplastic material consisting of long chain of hydrocarbon molecules. At elevated temperatures these molecules tend to move relative to one another so that the material becomes increasingly deformable and will eventually melt at the temperature around 110°C.
By means of process similar to the vulcanization of rubber the polyethylene molecules can be cross-linked. The process of cross- linking or vulcanization consists of producing chemical bonds at interval between the long molecular chain to give a “ladder” effect which prevents slippage between molecules as a result of cross-linking the material becomes heat resistant and does not soften at higher temperatures. Further it has better resistance to stress cracking and good resistance to ageing in hot air. With the change of structure there is no adverse effect on electrical properties.
41
POWER/CONTROL/FIRE PROOFCABLES
Flame resistant, halogen-free, screened cables Cable structure Technical data - Copper bare or stranded conductor depending on cross-section - Nominal voltage U/U 300/500 V - Halogen-free core insulation - Test voltage a.c. core/core 500 V - Earthing conductor – tinned Copper conductor to BS 6360 core/screening 2000 V Tests - Insulation integrity under direct flame propagation according to IEC 60331, EN 50200, BS 6387 CWZ - Flame test to IEC 60332-3&1, EN 50266-2, BS 4066 PT3, BS 5839-1:2003 - Smoke density to IEC 61034, EN 50268, BS 7622 - Halogen-free to IEC 60754, EN 50267, BS 6425 - Low corrosiveness of combustion gases to IEC 60754, EN 50267, BS 6425 Application These flame-resistant cables are used for all locations where a special protection against fire and fire damage is necessary for human life and equipment in industry complexes, power stations, public buildings, hotels, airports, subways, theatres, hospitals etc. Due to low capacity in relation of core/core to core-screening, this cable is suitable for electrical circuits of lagre systems where low capacity of electrical circuits when installing large lenghts of cables is important. Note CE = the product is conformed with the EC Low-Voltage Directive 73/23/EE Conforms to RoHS. Number of cores core cross section [mm2 ] Cable structure Approx. outer approx. [mm] Number of cores - Electrostatic screening of laminated Al-PET foil - Minimum bending radius approx. 6 cable diameter - Outer sheath of halogen-free compound, flame-retardant - Temperature range
42
FP - FIREPROOF CABLES
KIT COMPONENTS
ELECTRICAL PERFORMANCE
11KV 22KV 33KV 11KV 22KV 33KV 3X16-35–HMO-9 3X16-50–HMO-5 3X25-50–HMO-1 3X16-35–HMI-9 3X16-50–HMI-5 3X25-50–HMI-1 3X50-95–HMO-10 3X70-120–HMO-6 3X70-120–HMO-2 3X50-95–HMI-10 3X70-120–HMI-6 3X70-120–HMI-2 3X120–HMO-11 3X150-185–HMO-7 3X150-185–HMO-3 3X120–HMI-11 3X150-185–HMI-7 3X150-185–HMI-3 3X150-225–HMO-12 3X240-400–HMO-8 3X240-400–HMO-4 3X150-225–HMI-12 3X240-400–HMI-8 3X240-400–HMI-4 3X240-300–HMO-13 3X240-300–HMI-13 3X400–HMO-14 3X400–HMI-14
KIT SELECTION GUIDE OUTDOOR TERMINATION INDOOR TERMINATION
11KV 22KV 33KV 11KV 22KV 33KV 3X16-35–HMO-9 3X16-50–HMO-5 3X25-50–HMO-1 3X16-35–HMI-9 3X16-50–HMI-5 3X25-50–HMI-1 3X50-95–HMO-10 3X70-120–HMO-6 3X70-120–HMO-2 3X50-95–HMI-10 3X70-120–HMI-6 3X70-120–HMI-2 3X120–HMO-11 3X150-185–HMO-7 3X150-185–HMO-3 3X120–HMI-11 3X150-185–HMI-7 3X150-185–HMI-3 3X150-225–HMO-12 3X240-400–HMO-8 3X240-400–HMO-4 3X150-225–HMI-12 3X240-400–HMI-8 3X240-400–HMI-4 3X240-300–HMO-13 3X240-300–HMI-13 3X400–HMO-14 3X400–HMI-14
1. Red Mastic 9. Ground Copper
2. Lugs 10. Heat Shrink
3. Conductor 11. Heat Shrink
4. Heat Shrink Lug 12. Stress Control
5. Heat Shrink Anti Tracking
13.
Worm Drives
6. Heat Shrink Stress Control
14.
Copper Braid
7. Heat Shrink 15. Solder Tack
8. Black Sealing 16. Installation
43
CABLE JOINTKIT AND ACCESSORIES
KIT COMPONENTS
ELECTRICAL PERFORMANCE
Test 11KV 22KV 33KV A.C Dry Withstand 35KV/1 Minute 50KV/1 Minute 75KV/1 Minute D.C Withstand , 30 48KV 96KV 144KV Impulse Withstand 75KV 125KV 170KV Partial Discharge 12.7KV<5Pc 25KV<5Pc 38KV<5Pc
KIT SELECTION GUIDE
44
1. Lug 8. Stress Control Mastic
2. Conductor 9. Solder Tack
3. Heat Shrink Lug Sleeve 10. Copper Braid
4. Red Mastic 11. Worm Drives
5. Heat Shrink Rain Shed 12. Black Sealing Mastic
6. Heat Shrink Anti Tracking
13.
Ground Copper Braid
7. Heat Shrink Stress Control
14.
Installation Instruction Sheet
OUTDOOR TERMINATION INDOOR TERMINATION
11KV 22KV 33KV 11KV 22KV 33KV
1X16-50–MSOX-11 1X16-50–MSOX-6 1X25-50–MSOX-1 1X16-50–MSIX-11 1X16-50–MSIX-6 1X25-50–MSIX-1
1X70-120–MSOX -12 1X70-185–MSOX-7 1X70-185–MSOX-2 1X70-120–MSIX-12 1X70-185–MSIX-7 1X70-185–MSIX-2
1X150-300–MSOX-13 1X185-300– MSOX-8 1X240-500–MSOX-3 1X150-300–MSIX-13 1X185-300–MSIX-8 1X240-500–MSIX-3
1X400-630–MSOX-14 1X400-630– MSOX-9 1X630-800–MSOX-4 1X400-630–MSIX-14 1X400-630–MSIX-9 1X630-800–MSIX-4
1X800-1000–MSOX- 1X800-1000– MSOX- 1X1000–MSOX-5 1X800-1000–MSIX-15 1X800-1000–MSIX-10 1X1000–MSIX-5
HEAT SHRINK SINGLE CORE TERMINATIONS INDOOR/OUTDOOR,MSIX/MSO 1133 SERIES
ELECTRICAL PERFORMANCE
Test 11KV 22KV 33KV A.C Dry Withstand 35KV/1 Minute 50KV/1 Minute 75KV/1 Minute D.C Withstand , 30 48KV 96KV 144KV Impulse Withstand 75KV 125KV 170KV Partial Discharge 12.7KV<5Pc 25KV<5Pc 38KV<5Pc
KIT SELECTION GUIDE
3 CORE STRAIGHT THROUGH JOINT
11KV 22KV 33KV
3X16-50 – HMS-10 3X25-50 – HMS-5 3X35-70 – HMS-1
3X50-95 – HMS-11 3X70-95 – HMS-6 3X95-150 – HMS-2
3X120-185 – HMS-12 3X120-150 – HMS-7 3X185-300 – HMS-3
3X225-300 – HMS-13 3X185-240 – HMS-8 3X400 – HMS-4
3X400 – HMS-14 3X300-400 – HMS-9
45
1 In Line Connector 9 Heat Shrink Dual Wall Tubing
2 Grey Mastic 10 Copper Mesh Tape
3 Stress Control Mastic 11 Solder Tack
4 Heat Shrink Stress Control Tubing
12 Copper Earth Continuity Braid
5 XLPE Insulation 13 Worm Drives
6 Heat Shrink Insulation Tubing 14 G.I Mesh Tape
7 Stress Control Mastic 15 Heat Shrink Outer Jacket
8 Semi-Conducting Paint 16 Installation Instruction Sheet
HEAT SHRINK STRAIGHT THROUGH JOINT 3 CORE,HMS-1133 SERIES
1. In Line Connector 6. Copper Mesh Tape
2. Heat Shrink Stress Control Tube 7. G.I Mesh Tape
3. Grey Mastic 8. Copper Earth Contunuity Braid
4. Heat Shrink Insulating Tube 9. Black Sealing Mastic
5. Heat Shrink Dual Wall Tubing 10. Heat Shrink Outer Jacket
11. Installation Instruction Sheet
Test 11KV 22KV 33KV A.C Dry Withstand 35KV/1 Minute 50KV/1 Minute 75KV/1 Minute D.C Withstand , 30 48KV 96KV 144KV Impulse Withstand 75KV 125KV 170KV Partial Discharge 12.7KV<5Pc 25KV<5Pc 38KV<5Pc
KIT COMPONENTS
ELECTRICAL PERFORMANCE
KIT SELECTION GUIDE
SINGLE CORE STRAIGHT THROUGH JOINT 11KV 22KV 33KV
1X16-50 – MHSX-12 1X25-50 – MHSX-6 1X35-70 – MHSX-1 1X70-120 – MHSX-13 1X70-150 – MHSX-7 1X95-150 – MHSX-2 1X150-225 – MHSX-14 1X185-240 – MHSX-8 1X185-300 – MHSX-3 1X240-300 – MHSX-15 1X300-500 – MHSX-9 1X400-630 – MHSX-4 1X400-500 – MHSX-16 1X630-800 – MHSX-10 1X800-1000 – MHSX-5 1X630-1000 – MHSX-17 1X1000 – MHSX-11
46
HEAT SHRINK STRAIGHT THROUGH SINGLE CORE JOINT ,MHSX-1133 SERIES
1 Heat Shrink Outer Jacket 5 Copper Earth Continuity Braid
2 Heat Shrinkable Insulating Tubes 6 Worm Drives
3 In Line Connectors 7 Black Sealing Mastic
4 Red Mastic Tape 8 Installation Instruction Sheet
Test 1.1KV A.C Dry Withstand Voltage 3.5KV/1 Minute D.C Withstand , 30 Minute 15KV/15 Minute
KIT COMPONENTS
ELECTRICAL PERFORMANCE
KIT SELECTION GUIDE
LT STRAIGHT THROUGH JOINT
1.1KV
3 ½ / 4 X 1.5 – 6 – HMLT-1
3 ½ / 4 X 10 – 16 – HMLT-2
3 ½ / 4 X 25 – 50 – HMLT-3
3 ½ / 4 X 70 – 150 – HMLT-4
3 ½ / 4 X 185 – 400 – HMLT-5
HEAT SHRINK STRAIGHT THROUGH SINGLE CORE JOINT,HMLT-1000 SERIES
47
Test 1.1KV A.C Dry Withstand Voltage 3.5KV/1 Minute D.C Withstand , 30 Minute 15KV/15 Minute
LT END TERMINATION KIT
1.1KV OUTDOOR
3 ½ / 4 X 16 – 35 – HMLT(O)-1
3 ½ / 4 X 50 – 95 – HMLT(O)-2
3 ½ / 4 X 120 – 185 – HMLT(O)-3
3 ½ / 4 X 225 – 300 – HMLT(O)-4
3 ½ / 4 X 400 – 500 – HMLT(O)-5
1.1KV INDOOR
3 ½ / 4 X 16 – 35 – HMLT(I)-1
3 ½ / 4 X 50 – 95 – HMLT(I)-2
3 ½ / 4 X 120 – 185 – HMLT(I)-3
3 ½ / 4 X 225 – 300 – HMLT(I)-4
3 ½ / 4 X 400 – 500 – HMLT(I)-5
ELECTRICAL PERFORMANCE
KIT SELECTION GUIDE
48
HEAT SHRINKEND TERMINATION LT,KIT,HMLT(I)/(O)-1000 SERIES
Stop valves shall provide leak- free, tight closure (complete stop) of water
flow through the valve in the closed position.It shall comprise of a body on which head, handle, spindle, gland,
stuffing box etc. with seals and washers mounted.
During operation washer plate & stem assembly with the spindle is screwed down causing the washer to shut
on the seat against the water pressure.All components shall be of “water works” standard and shall be of a well
proven robust design and manufacture.The castings, forgings, and die castings shall be close grained, sound,
smooth and shall be carefully cleaned & dressed.All castings shall be free of blowholes & other defects. No
plugging will bepermitted in case of blowholes.
All non-metallic materials to be provided shall be listed in current “water fittings and materials directory.”If
the washer plate is sand or shell casting, it shall be machined all over.
Gate Valves
We provides the complete package of industrial valves for projects, hence the product line also includes the most commonly used
Gate Valves includes spindle gate valve and cast iron gate valve.
offers a wide range of gate valves which are manufactured as per the leading Standards. These can be easily customized as per the
requirements of customers by the efforts of the in-house R&D team.
General specifications of Gate Valves
Standard : IS 14846 / BS 1414 / API 600 / API 602 / API 6D
MOC : Cast Iron / Cast Carbon Steel / Stainless Steel / Forged Carbon Steel / Forged Stainless Steel
Ends : Double Flanged
Size (NB) : 15 mm to 1600 mm
Pressure Rating : 125#, 150#, 300#
49
STOP /GATE
Crawley & Ray team ensures to design a range of globe valve includes cast iron globe valve and cast steel globe valve
which is in tandem with ISO standards and manufactured using high grade raw material procured from authorized
dealers across the nation. We manufacturers and exports wide range of globe valve like balancing valve, cast iron globe
valve, cast steel globe valve, carbon steel globe valve and balancing globe valve. Our range of globe valve meets the
various needs of industries and is well appreciated by a wide base of clients owing to the below mentioned features:
Corrosion resistant, Resistant to varying Pressures and temperatures, Dimensionally accurate
Specifications
Face to face and flange dimensions can be altered as per customers
requirement. The valve will generally conform to IS:9338 - 1984 PN 10
Flange drilled as per - IS 1538-1993 Clause 9.1 (FF)
Hydro Test Pressure - Body 15kg/cm2, Seat -
10kg/cm2
Tolerance where not specified ±2% Electric Solenoid Valve
These 12-Volt DC electric solenoid valves with barbed inlet and outlet ports are great for projects! These types of valves are often used for automatic faucets, foot operated faucets, drinking fountains etc.However, they work great for almost any project requiring a 3/4" solenoid valve.
Technical Specifications Working Voltage DC12V Maximum current 450 mA Operating Mode Normally Closed (Valve opens when energized) Inlet/Outlet Ports external diameter 3/4"(19mm) Weight 103 g
Materials Nylon/ Stainless Steel/Polyoxymethylene
Value Type Diaphragm Valve (Servo operated) Filter Screen Stainless Steel Inlet Filter Suitable Media Water, Very Low Viscosity Fluids Temperature Limitations Maximum Fluid Temperature 120℃
Valve Response Time Fast Acting Pressure 0.02~0.8MPa Estimated Valve Life More than 200,000 Cycles
50
GLOBE VALVE/ELECREIC SOLENOID VALVE
Now in India manufactured by Armacell (I) Pvt Ltd.world leader in their field. The following brands are now available in finest quality & Process control condition.AR/ACCOFLEX & ARMAFLEX
This is available in sheets and Tube’s(Sleeves) AR/ACCOFLEX
TECHNICAL DATA Values
Material Foamed nitrile rubber
Density 60=5 kg/m3
Temperature Range -400C to
+1050C
Tube size(I.D) ¼’’-1.3/8’’
Tube Thickness 6mm & 9mm
Sheet Thickness 6mm & 9mm
TECHNICAL DATA Values
Material Foamed nitrile rubber
Density 60=5 kg/m3
Temperature Range -400C
to+1050C
Tube Size(I.D) ¼”-4.1/4”
Tube Thickness
9,13,19,25,32mm
Sheet Thickness 6mm & 9mm
Description:- Flexible elastomeric pipe insulation.Ideal for window ,split ACs,plumbing & light Commercial
use.for cost effective energy conservation,sweat control and easy installation.
Also offers sound-deadening control for HVAC,refrigeration and plumbing applications.
Application:-
Flexible insulation for window & split A/c,Ducting,Roofing,Plumbing,Refrigeration,etc.
51
ELASTOMERIC NITRILE RUBBER INSULATION
In order to meet the various commercial requirements as well as needs artists individuals, we are offering this
range of Water Proof Canvas Tarpaulin. Customized as per the specifications of our clients, we are
covetingly supplying these sheets of canvas at industry leading prices. Basically these are used for fabrication of
car covers, water proof curtains, machine covers, tents bags, rain coat, ground sheet and many other commercial
and domestic use.
Few major specifications of this are: Soft canvas waterproof used for car covers
Sizes: available in 90 cm, 152 cm width
Color : off-white, olive green, parrot green, khaki and (any color of client choice)
Processing: coated
Textured used: 100% cotton
Remarks: we can make car cover, motor cycle covers and curtains of this fabrics
Other Information
Minimum Order Quantity: 500 Meter
Port of Dispatch: Mumbai
Fire Retardant
We are one of the trusted industries engaged in offering superior quality Fire Retardant Tarpaulin to the
customers. Available in various sizes, these products can also be customized as per the exact details provided by
the clients. The Fire Retardant Tarpaulin is made available by us in off-white or olive green colour. Moreover,
the tarpaulin is coated with chemical, which makes these fire retardant.
Following are the specifications of these products: Sizes : Any size
Color: Off-white or olive green
Processing : Coating done by chemical for fire retardant and water proof
Textured Used: Canvas cloth of 300 GSM
Remarks: Tarpaulins shall be made of canvas cloth with water repellent and fire retardant. Best used
for industrial purpose for making curtain round the furnace and boiler
Soon we will be starting with the following items:
TRANSFORMERS
COPPER ,COPPER PLATE, BUS BAR ,ETC
52
WATER PROOF CANVAS
We deal in a wide array of organic, inorganic, laboratory and industrial chemicals which can be broadly classified as
Industrial Chemicals, Powder Chemicals, Solvent Chemicals, PetroChemicals, Potassium Carbonate and Specialty
Chemicals.
Our products are renowned worldwide due to their following salient features:
• Eco friendly & Stable
• Effective in diverse atmospheric conditions
• Pure & accurate composition
• Non toxic & hygienic
• Inflammable
• Good solvent
We take due care while sourcing these chemicals. These chemicals are procured keeping in mind the varied
requirements of our clients & their application areas.
Industries We Cater
• Plastics & Rubbers Industries
• Pharmaceutical Industry
• Aromatics & solvents
• Agrochemical & Fertilizer Industry
• Food additives
• Oil & Gas Industry
• Sugar Industry
• Textiles Chemicals
Presenting eco friendly and safe chemicals and allied products including Pharmaceutical Raw Materials,
Petrochemicals, Industrial Chemicals, Powder Chemicals, Solvent Chemicals, Minerals, etc.
53
Glacial Acetic Acid / Potassium Carbonate/ Liquid
Paraffin
Industrial Chemicals: Glacial Acetic Acid, Formic Acid, Para Formaldehyde, Chloroform, Phosphoric Acid, Methylene Chloride, Dimethyformamide, AAG Textile Acid, Hydrogen Peroxide, Soda Ash Substitute, etc.
Powder Chemicals: Potassium Carbonate, Adipic Acid, Bisphenol-A, etc. Solvent Chemicals: Ethyl Acetate, Liquid Paraffin, Isopropyl Alcohol, Formaldehyde, Acetone, etc. Petrochemicals: Cyclohexanone, Cyclohexane, Caustic Potash Flakes, Polyethylene Glycol, etc. Specialty Chemicals:
Molecular Sieve, Glycerine, Sulfamic Acid, Sorbitol, Dipropylene Glycol, Trimellitic Anhydride, etc. Caustic Soda Flakes Solvents Minerals Petrochemicals
Acetanilide Acetic acid glacial Acetone / Di Acetone Acetonitrile
Acetophenone Acetyl chloride Acryl amide Acrylic acid
Activated carbon powder / granular
Adipic acid Aerosil 200 Agar powder
Allyl alcohol (2- propene-1-ol)
Aluminum oxide Aluminium hydroxide gel
Aluminium nitrate
Aluminium sulfate 16-hydrate
Ammonia solution about 25% (0.91) Pure
Ammonium acetate Ammonium acetate cryst.
Ammonium adipate Ammonium bromide Ammonium carbonate /
bi Carbonate Ammonium chloride
Ammonium dichromate cryst.
Ammonium iron (III) citrate
Ammonium nickel (II) sulfate
Ammonium nitrate
Ammonium per
sulfate
Ammonium sulfate Ammonium thiocyanate Aniline
Antimony(III) chloride
Antimony(III) oxide / chloride
Antimony(III) sulphide 1- Butanol
Barium carbonate
Barium chloride Barium diphenylamine sulfonate
Barium hydroxide Barium nitrate
Barium sulfate Benedict's reagent (qualitative)
Benzoyl chloride Benzene
Benzoic acid Benzalkonium chloride
solution 50%
Benzyl alcohol FFC / IP BHT (butylated
hydroxy toluene)
Bismuth (III) nitrate Boric acid cryst. / POWDER
Bromine Bromobenzene
Butyl cello solve Cadmium nitrate 4- hydrate
Calcium carbonate PPT / Activted
Calcium chloride fused 75 % & 85 %
Calcium hypochlorite
Calcium nitrate Calcium sulfate / silicate Car boxy methyl cellulose sodium salt
Carbon tetrachloride Cetrimide Charcoal activated Chlorobenzene
Chloroform Chromium(VI) oxide Citric acid mono- hydrate / Anhydrous
Cobalt(II) acetate tetrahydrate
54
Coco mono / Di Ethanol Amide
Cocobeain Copper (II) chloride Copper(II) sulfate
Cyclohexane Cyclohexanone D(-)-Mannitol 1,2-Dichloroethane
1,4-Dichlorobenzene 1,4- Dioxan
Dextrose Anhydrous
Di Sod Phosphate di-Ammonium hydrogen phosphate
di-Ammonium
oxalate monohydarte
Dichloromethane ( M. D. C.)
Diemethyl sulfoxide Diethanolamine
Diethyl Phthalate Diethylene glycol Di-n-Butyl phthalate di-Potassium hydrogen phosphate anhydrous
di-Potassium
oxalate monohydrate
E.D.T A dipotassium E.D.T. A di SOD salt Epi Chloro hydrine
Ethanolamine Ethyl acetate Ethyl methyl ketone Ethylene glycol mono Sterate
Ferric Alum/ Non Ferric Alum
Ferrous Sulfate Fomic acid 85%, 98 - 100%
Formaldehyde sol. 37- 41%
Glycerin IW / IP Grinding Media Guar Gum Gum acasia
Gypsum Powder Hexamine Hydriodic acid 55% Hydrogen peroxide solution 50%
Iron (II) sulfate Iso amyl acetate / ALCOHOL
Iso propyl alcohol Isoctane
L (+)- Tartaric acid
cryst.
Lactic acid about 90% Lead acetate / nitrate Lime Hyd.
Lithium carbonate Magnesium chloride Magnesium sulfate MAIZE STERACH
Manganese acetate Manganese dioxide Manganese sulfate Mealic Anyhdride
Melamine Mercuric Salts & Derivatives
Mercury Methanol
Mineral Terpantine Monometers N,N-Dimethyl
formamide (D.M.F.)
N,N-Dimethylaniline
n-Butyl acetate Nickel (II) chloride, hydroxide
Nickel (II) nitrate,SULPHATE
Nitrobenzene
n-Pentane ortho-Phosphoric acid 85%
Oxalic acid O-Xyene
Paraffin Wax / Micro
Wax Parafin Liquid Light Phenol crystal (Carbolic
acid) Phenolphthalein indicator white / yellow
Phenyl Mercuric
Acetete / Nitrate Pine Oil Poly Vinyl Alcohol ( PVA
) All Grade Polyethylene glycol
(P.E.G.) 200, 300,
400, 600, 4000, 6000
Potassium antimony(III) oxide
Potassium bromide Potassium carbonate, CHLORIDE
Potassium di chromate
Potassium di hyd. phosphate
Potassium di sulfite Potassium ferro cynide / Feery cynide
Potassium fluoride
55
Potassium hydroxide flakes / Pellets
Potassium iodate / iodide
Potassium Nitrate
Potassium per sulfate
Potassium permanganate
Potassium sulfate Potassium thiocyanate Prop ionic acid
Pthalic Anhydride Pyridine Pyrogallol Red / Yellow Oxide
Remax. Aeromax solvent
Resorcinol Salicylic acid Silica gel self indicating
Sod. bi sulphite Soda Ash Light / Heavy
Sodium acetate anhydrous
Sodium borohydride
Sodium carbonate anhydrous
Sodium chloride Sodium dichromate
Sodium disulfite
Sodium hypochlorite solution 4% chlorine
Sodium meta bisul
fite
Sodium nitrate,
Molybdate
Sodium sulfate / anhyd / course
Sodium sulfide flakes / fused
Sucrose Sulfamic acid Telcom Power (Soft Stone)
tert-Butyl alcohol
Tetrachloroethylene( T.C.E)
Tetrahydrofuran (T.H.F.)
Thioglycollic acid about 80%
Thiourea
Tiethylamine Tin (metal) Tin(II) chloride Titanium Di Oxide
Toluene Nitration Grade
Trichloroethylene Triethanolamine tri-sodium citrate
Tween 20 Tween 80 Urea technical Xylene
Zinc acetate Zinc chloride Zinc Nitrate Zinc oxide
Zinc powder Zinc sulfate
56
We are engaged in offering our clients Wire Mesh, which is manufactured using high quality steel at our vendors
end. Our clients can avail this mesh in numerous specifications of steel grade, wire diameter, sizes, length & width,
plain ends, ends with hook and bends as per their requirements. This mesh is highly demanded by various
industries for different applications.
57
WIRE MESH
Technology for clean steel production Tundish is a medium for pouring molten metal into a mold, having holes in the bottom to prevent splashing. All plates will be ultra sonically tested.
Stress relieving will be done for all welded joints
The Trunion ring material will be as per specification.
The tundish will be sent with heat resistant aluminium paint.
Welding: all welds of ladle shell and bottom are full penetration welds with backgauged roots. All welds of the charging ladle are 100 % magnaflux- tested (mt). In addition all full penetration welds are 100 % ultrasonic- tested (ut). X- ray testing has to be done on welds marked.
58
TUNDISH
Our Professionals
Being a renowned manufacturer, exporter, wholesaler, retailer and trader of a wide range of Industrial Goods, we
know the importance of skilled workforce in the organizational set up. Our company has expert professionals who
have in-depth experience of the entire production process. The objectives of our professionals include timely
delivery of quality products and customized services.
Some of four professionals are :
Engineers
Technicians
Quality controllers
Warehousing and Packaging experts
Sales and Marketing personnel
Quality Assurance
We never compromise on our quality level and this aspect is reflected in our products. As per our client centric
approach, we try to identify key technologies and deliver high impact solutions. We have hired an efficient team of
procurement agents and quality controllers, which performs stringent tests on the products.
Before dispatching the final consignments, we test the products on various parameters, such as :
Electrical system construction errors
Noiseless operation
Absorption or retention value
Voltage balance
External and internal wiring
Sensitivity
Illumination capacity
Infrastructure We are backed by a fully functional infrastructure spread across a large area. It is divided into various units such as
manufacturing unit, quality testing unit, design unit and warehousing & packaging unit in order to manufacture
quality range of industrial goods. Our manufacturing unit has all the requisite machinery, which help in maintaining a swift rate of production. The
advanced techniques and innovative designs incorporated by our expert and experienced professionals have enabled
us in attaining great heights in the domestic market and Indian Subcontinent. Moreover, stringent testing and quality
check measures are used to make the goods more efficient and client friendly.
Warehousing And Packaging
Located in Mumbai, Maharashtra, we have established a capacious warehousing area, which has modern facilities and
equipment. These facilities enable us to store a large quantity of the products for a longer period of time. Our team
also keeps a note of the available stocks and takes care of final delivery at our customers' sites.
64
In addition to this, we also provide our valued clients quality packaging for the wide range of our industrial goods. The
packaging material used is of superior quality, which keep the products safe during transportation.
Client Satisfaction With our vast industry experience and deep knowledge, we have established a distinguishable benchmark in the
industry. We procure quality raw material from the vendors and follow defined process control procedures at various
stages to ensure almost 100% client satisfaction. We have a strong clientele base in Indian Subcontinent and our well
known clients include L&T, GDCL, Simplex, Adani and Vedanta.
To retain our clients, we pay attention to the following parameters :
Understanding client requirement and following ethical business practices
Implementation of industry standards & norms for attaining optimum quality
Timely delivery of products
We are also the dealers of:
BERGER PAINTS INDIA LTD AKZO NOBEL INTERNATIONAL PAINTS UNBRAKO H.T.NUT&BOLTS M.S.NUT&BOLTS ANCHOR WIRE ROPES ESAB INDIA LTD ASIAN WIRES&CABLE LTD MOSIL LUBRICANTS AND GREASES
UNIFRAX
GEORGE FISHER
Why Us? Our products are the best available in the market; their performance and quality make them stand out of all
the same range of products available. Our professionals are expert, experienced and goal oriented.
Some of the following attributes make us the best in the Indian Subcontinent :
We offer our exclusive range of products in latest design, pattern and vivid colors
We ensure that our product is processed out of superior quality
Our products are made keeping in mind the latest market trend and fashion
We offer our products at desirable price
We use superior quality machinery in order to manufacture a premium quality product
We ensure quick order processing
We have a wide distribution channel
65
COMPANY PROFILE
Basic Information
Busniess Type
Supplier Manufacturer Exporter Trader Contractor
Owership & Capital
Year of Establishment
2007
Ownership Type Sole Proprietorship
(Individual)
Trade & Market
Major Market
Contact us:
Indian
Subcontinent
CONTACT DETAILS Mr. Nitin Agarwal(PROPRIETOR)
No. 116 - A, 1st Floor, Arenja Arcade, Sector - 17, Vashi
Navi Mumbai, Maharashtra - 400 703, India
Telephone: +(91)-(22)-67912128/ 39120444
Moblie No: +91 9967538498/9892233984
E-mail: [email protected]
Contact via E-mail Contact via Mobile
Contact via SMS
66