Ball Valve, CS, FL
Design The steel ball valves are designed manufactured to provide maximum service life and
dependability. All ball valves are full ported and meet the design requirements of
American Petroleum Institute Standard API 608&API 60 British standard 885351 and
generally conform to American Society of Mechanical engineers standard ASME 816.34
valves are available in a complete range of body/bonnet materials and trims.
Available Modifications Trim changes
End connection modifications
Packing and gasket change
Operator mounting
Handwheel extensions
rL,Operation
Extended lever for easy operation.
also available with gearing.motor
actuators.pneumatic or hydraulic
actuators for more difficult services
[;!Packing
Std packing multiple v-teflon packing,
combined with live loading.maintains
packing compression under high-cycle
and severe service applications.
Graphite packing is used for high
temperature situation.
[;]Body&Bonnet
Split or 3-piece,split body& bonnet for
12" &small.disassembles easily for repair
components.
[;I BPS
Blow-out proof stem
A pressure-safe stem shoulder
design that protects against failure
under excess pressure.
Ranges of Materials Standard body/bonnet materials include nine grades of carbon, low albyandslarless
steel, for special applications they can be supplied in other grades of alloy and
stainless steel. There's a full range of trim materials to match any service optional
packing and gasket materials are available for a full range of service conditions.
Pressure equalizing
As or fd
Customer specified coatings
Weld end bore changes
Oxygen&chlorine cleaning&packaging
�BORE
Full bore or reduced bore .full-bore
design provides exceptional flow control.
�AS
Anti statics. A metallic contact is always
granted between ball and stem /body
to discharge eventual statics build-up
during service.
ill End Connections
A choice of flanged
RT J flanged or buttwelding end for
piping flexibility.
C]FS
Fire safe designed to APl607 or
BS 6755 to grant their operatim suitability
in case of fire. Secondary metal-to
metal seal acts as backup if primary
sea is destroyed by fire. Valves ordered
for compliance with API 607 will be
provided with graphite packing
and gaskets.
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Applicable Standards: eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE,API 607
eANTI STATIC,API 608
eSTEEL VALVES,ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
u:,
Cl.
z
I
L1
Floating, Cast Steel Ball Valve 150Lb
Design descriptions: eFULL PORT DESIGN
e BG.SOL TED BONNET.SPLIT BODY
eFLOATING BALL TYPE
e BLOW-OUT PROOF STEM
e FIRE DURABLE CONSTRUCTION
eANTI STATIC DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of Parts
No Part Name
1 Body
2 Bonnet
3 Ball
4 Stem
5 Seat Ring
6 Bonnet Gasket
7 Bonnet stud
8 Bonnet Stud Nut
9 Packing
10 Gland Flange
11 Gland Bolt
12 Stop Plate
13 Handle Note: 1 )A 1 OS+ENP optional
2)Spiral wound construction.
Carbon Steel ASTM Materials
18Cr-9Ni-2Mo
A216-WCB A'.351-CF8M
A216-WCB A'.351-CF8M
A182-F3041l A182-F316
A276-304 A276-316
RPTfE
Graphite+3042l PTfE
A19.3-B7 A19.3-B8
A194-2H A194-8
PTfE
A216-WCB A'.351-CF8M
A19.3-B7 A19.3-B8
Cart:x:>n Steel Cart:x:>n steel+Zn
Carbon Steel
Carbon Steel
A'.352-LCB
A'.352-LCB
A182-F3041l
A276-304
Graphite+3042l
A320-L7
A194-4
A'.352-LCB
A19.3-B7
Carbon Steel
Dimensional datas of ANSI Class 150Lb NPS V2 3/4 1 1 11z 2 211z 3 4 6 8 10 12 in
DN 15 20 25 40 50 65 80 100 150 200 250 300 mm
L 4.25 4.62 5.00 6.50 7.00 7.50 8.00 9.00 15.50 18.00 21.00 24.00 in (RF) 108 117 127 165 178 190 203 229 394 457 533 610 mm
L1 5.50 6.00 6.50 7.50 8.50 9.50 11.12 12.00 18.00 20.50 22.00 25.00 in (BW) 140 152 165 190 216 241 283 305 457 521 559 635 mm
H 2.12 2.12 2.75 3.50 4.12 6.12 7.25 8.00 10.00 11.00 13.50 16.50 in
55 55 70 90 105 155 185 205 255 280 345 420 mm
w 5 5 6 8 14 16 20 20 24 32 32 32 in
130 130 160 200 350 400 500 500 600 800 800 800 mm
wt(kg) 2.3 3 4.5 7 9.5 15 19 33 93 160 200 280 RF
1.8 2.8 3.7 6.2 8.5 14 21 35 98 170 225 295 BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Floating, Cast Steel Ball Valve 300Lb/600Lb
Applicable Standards: eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE,API 607
eANTI STATIC,API 608
eSTEEL VALVES,ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
Design descriptions: eFULL PORT DESIGN
e BG.SOL TED BONNET.SPLIT BODY
eFLOATING BALL TYPE
e BLOW-OUT PROOF STEM
e FIRE DURABLE CONSTRUCTION
eANTI STATIC DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of Parts
No Part Name
1 Body 2 Bonnet
3 Ball
4 Stem
5 Seat Ring
6 Bonnet Gasket
7 Bonnet stud
8 Bonnet Stud Nut
9 Packing
10 Gland Flange
11 Gland Bolt
12 Stop Plate
13 Handle
L 1 Note: 1 )A 1 OS+ENP optional
2)Spiral wound construction.
Carbon Steel ASTM Materials
18Cr-9Ni-2Mo
A216-WCB A'.351-CF8M
A216-WCB A'.351-CF8M
A182-F3041l A182-F316
A276-304 A276-316
R.PTfE
Graphite+3042l PTfE
A193-B7 A193-B8
A194-2H A194-8
PTfE
A216-WCB A'.351-CF8M
A193-B7 A193-B8
Carbon Steel Carbon steel+Zn
Carbon Steel
Dimensional datas of ANSI Class 300Lb NPS V2 3/4 1 1 11z 2 211z 3 4 6 8 10
DN 15 20 25 40 50 65 80 100 150 200 250
L 5.50 6.00 6.50 7.50 8.50 9.50 11.12 12.00 15.88 19.75 22.38 (RF) 140 152 165 190 216 241 283 305 403 502 568
L1 5.50 6.00 6.50 750 8.50 9.50 11.12 12.00 18.00 20.50 22.00 (BW) 140 152 165 190 216 241 283 305 457 521 559
H 2.12 2.12 2.75 3.50 4.12 6.12 7.25 8.00 10.00 11.00 13.50
55 55 70 90 105 153 187 206 255 280 345
w 5 5 6 8 14 16 20 20 24 32 32
130 130 160 200 350 400 500 500 600 800 800
wt(kg) 2.5 3.5 5.5 10.5 14.5 23.5 30 55 118 200 250
1.8 2 3.2 5.5 8.7 15 18 36 85 152 182
Dimensional datas of ANSI Class 600Lb
NPS V2 3/4 1 1 11z 2 211z 3 4 6 8 10
ON 15 20 25 40 50 65 80 100 150 200 250
UL1 6.50 7.50 8.50 9.50 11.50 13.00 14.00 17.00 22.00 - -
(RF/BW) 165 190 216 241 292 330 356 432 559 - -
L2 - - - - 11.62 13.12 14.12 17.12 22.12 - -
(RTJ) - - - - 295 333 359 435 562 - -
H 2.38 2.38 3.00 4.00 4.75 6.88 8.38 9.25 11.38 - -
61.5 61.5 78 101 120 174 212 234 289 - -
w 5 6 8 14 16 20 24 24 32 - -
130 160 200 350 400 500 600 600 800 - -
wt(kg) 3.3 4.5 7.2 13.5 19 31 39 71 153 - -
2.6 3.1 4.8 8 3 22 27 53 120 - -
Carbon Steel
A'.352-LCB
A'.352-LCB
A182-F3041l
A276-304
Graphite+3042l
A320-L7
A194-4
A'.352-LCB
A193-B7
Carbon Steel
12 in
300 mm
25.50 in
648 mm
25.00 in
635 mm
16.50 in
420 mm
32 in
800 mm
330 RF
232 BW
12 in
300 mm I
- in - mm - in - mm - in - mm - in - mm - RF/RTJ - BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Design The steel ball valves are designed manufactured to provide maximum service life and
dependability. All ball valves are full ported and meet the design requirements of
American Petroleum Institute standard API 608&API 60 British standard BS5351 and
generally conform to American society of Mechanical Engineers standard ASME 816.34
valves are available in a complete range of body/bonnet materials and trims.
Available Modifications Trim Changes
End Connection Modifications
Packing And Gasket Change
Operator Mounting
Handwheel Extensions
rL,Operation Extended lever for easy operation. Also
available with gearing, motor actuators,
pneumatic or hydraulic actuators for
more difficult services
[;!Packing
Std packing multiple v-teflon packing, combined with live loading, maintains packing compression under high-cycle and severe service applications. Graphite packing is used for hightemperature situation.
ill Body&bonnet Split or 3-piece,split body& bonnet for
12' & small. Disassembles easily for repair
or replacement of internal components.
[;IAS
Anti statics. A metallic contact is always
granted between ball and stem /body to
discharge eventual statics build-up during service.
Ball Valve CS, TIVI
Ranges of Materials Standard body/bonnet materials include nine grades of carbon, low albyadstainless
steel, for special applications they can be supplied in other grades of ally and
stainless steel, there's a full range of trim materials to match any service optional
packing and gasket materials are available for a full range of service conditions.
Pressure Equalizing
ASORFD
Customer Specified Coatings
Weld End Bore Changes
Oxygen & Chlorine Cleaning & Packaging
[j3BORE Full bore or reduced bore . Full-bore design provides exceptional flow control.
�DBB
Double block & bleed. The body cavity is isolated when the ball is in either fully closed or fully opened position, the medium entrapped in it can easily be bled to avoid aver pressure.
00 End Connections A choice of flanged RT J flanged or buttwelding end for piping flexibility.
l::::]FS
Fire safe designed to APl607 or
BS 6755 to grant their operation
suitability in case of fire. Secondary metal-to metal seal acts as backup
if primary seal is destroyed by fire.
Valves ordered for compliance with
API 607 will be provided with graphite
packing and gaskets.
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Trunnion Mounted,Cast Steel Ball Valve 150Lb/300Lb
Applicable Standards: eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE,API 607
eANTI STATICS,API 608
eSTEEL VALVES,ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
Design descriptions: eFULL PORT DESIGN
e BB.SOL TED BONNET.SPLIT BODY
eTHREE PIECES BODY FOR 12" & ABOVE
eTRUNNION MOUNTED BALL TYPE
e BLOW-OUT PROOF STEM
e FIRE SAFE CONSTRUCTION
eANTI STATICS DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of parts
No Part Name Carbon Steel ASTM Materials
Carbon Steel
21
I
</) .__
L1
1 Rnrlv
2 Bonnet 3 Ball 4 Stem 5 Seat 6 Seat Insert 7 Seat Spring 8 SeatO-Rinq 9 StemO-Rinq 10 Bonnet Gasket 11 Bonnet 0-Rinq 12 Antistatic Sprinq 13 Lower Ccver 14 Bonnet Stud 15 Bonnet Stud Nut 16 Trunnion 17 Trunnion Bearing 18 Gland Flange 19 Gland Bolt 20 Stop Plate 21 Handle
Note: 1)A105+ENP optional
2)Spiral wound construction.
Dimensional datas of ANSI Class 150Lb NPS 2 2 112 3 4 6 8 10 12 14 16 18
DN 50 66 80 100 150 200 250 300 350 400 450
L 7.00 7.50 8.00 9.00 15.50 18.00 21.00 24.00 27.00 30.00 34.00 (RF) 178 190 203 229 394 457 533 610 686 762 864 L1 8.50 9.E/J 11.12 12.00 18.00 20.50 22.00 25.00 30.00 33.00 36.00
(BW) 216 241 283 305 457 521 559 635 762 838 914
H 7.00 7.50 8.25 9.25 20.88 24.62 25.62 30.75 31.00 36.25 38.25 177 190 210 235 530 625 650 780 790 920 970
w 14 16 20 20 24 24 24 24 32 32 32 3'3J 400 500 500 600 600 600 600 800 800 800
wt(kg) 15 19 27 38 81 140 160 205 260 390 510 13.5 15.5 24.5 32.5 76 132 147 182 241 370 495
Dimensional datas of ANSI Class 300Lb NPS 2 2 112 3 4 6 8 10 12 14 16 18
DN 50 66 80 100 150 200 250 300 350 400 450
L 8.50 9.E/J 11.12 12.00 15.88 19.75 22.38 25.50 30.00 33.00 36.00 (RF) 216 241 283 305 403 502 568 648 762 838 914 L1 8.50 9.E/J 11.12 12.00 18.00 20.50 22.00 25.00 30.00 33.00 36.00
(BW) 216 241 283 305 403 521 559 635 762 838 914
H 7.00 7.50 8.25 9.25 20.88 24.62 25.62 30.75 31.00 36.25 38.25 177 190 210 235 530 625 6'3J 780 790 920 970
w 14 16 20 20 24 24 24 24 32 32 32 3'3J 400 500 500 600 600 600 600 800 800 800
wt(kg) 19 24 34 48 101 175 200 255 325 485 635
14 16 25 34 82 145 155 185 238 375 516
18Cr-9Ni-2Mo
A216-WCB A351-CF8M A352-LCB A216-WCB A351-CF8M A352-LCB A182-F3041l A182-F316 A182-F3041l
A276-304 A276-316 A276-304 A105+ENP A182-F316 A350-LF2+ENP
Glass Filled PTFE A313-304 lnconel X-7'3J A313-304
NPR Vrron Vrton NBR �, Vrron n, Vrton
Graphrre+304L1 Graphite+316 �, Graphrre+304"'1
NBR Vrron Vrton A313-304 A313-316 A313-304
A216-WCB A182-F316 A182-F304 A193-B7 A193-B8 A320-L7 A194-2H A194-8 A194-4 A276-304 A276-316 A276-304 304+PTFE 316+PTFE 304+PTFE
A216-WCB A351-CF8M A352-LCB A193-B7 A193-B8 A193-B7
Carbon Steel Carbon Steel+Zn Carbon Steel Carbon Steel
20 24 26 28 30 32 36 in
500 600 650 700 750 800 900 mm
36.00 42.00 45.00 49.00 51.00 54.00 60.00 in 914 1067 1143 1245 1295 1372 1524 mm
39.00 45.00 49.00 53.00 55.00 60.00 68.00 in 991 1143 1245 1346 1397 1524 1727 mm
43.38 45.25 50.75 55.12 64.12 70.88 80.75 in 1100 1150 1290 1400 1630 1840 2050 mm
32 32 32 32 32 32 32 in 800 800 800 800 800 800 800 mm 750 1200 1400 1860 2100 2530 2970 R F 726 1125 1250 1640 1930 2390 2760 BW
20 24 26 28 30 32 36 in
500 600 650 700 750 800 900 mm
39.00 45.00 49.00 53.00 55.00 60.00 - in 991 1143 1245 1346 1397 1524 - mm
39.00 45.00 49.00 53.00 55.00 60.00 - in 991 1143 1245 1346 1397 1524 - mm
43.38 45.25 50.75 55.12 64.12 70.88 - in 1100 1150 1290 1400 1630 1800 - mm
32 32 32 32 32 32 - in 800 800 800 800 800 800 - mm 935 1500 1750 2225 2450 2870 - R F 782 1280 1375 1825 2180 2260 - BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Trunnion Mounted,Cast Steel Ball Valve 600Lb/900Lb
Applicable Standards: eSTEEL BALL VALVES API 608/API 60 eSTEEL BALL VALVES ISO 14313 eFIRE SAFE.AP! 607 eANTI STATICS,API 608 eSTEEL VALVES.ASME 816.34 eFACE TO FACE ASME 816.10 eEND FLANGES,ASME 816.5 e BUTIWELDING ENDS ASME B 16.25 e INSPECTION AND TEST, API 598/ API 60
21
L 1
Design descriptions: eFULL PORT DESIGN e BB.BOLTED BONNET.SPLIT BODY eTHREE PIECES BODY FOR 12" & ABOVE eTRUNNION MOUNTED BALL TYPE e BLOW-OUT PROOF STEM e FIRE SAFE CONSTRUCTION eANTI STATICS DEVICE eSTOPPER DEVICE elS05211 MOUNTING PAD e FLANGED OR BUTIWELDING ENDS e AVAi LAB LE WITH WG OPERA TOR
Materials of parts
No Part Name
1 Rnrlv
2 Bonnet 3 Ball 4 Stem 5 Seat 6 Seat Insert 7 Seat Spring 8 SeatO-Rinq 9 StemO-Rinq 10 Bonnet Gasket 11 Bonnet 0-Rinq 12 Antistatic Sprinq 13 Lower Ccver 14 Bonnet Stud 15 Bonnet Stud Nut 16 Trunnion 17 Trunnion Bearing 18 Gland Flange 19 Gland Bolt 20 Stop Plate 21 Handle
Note: 1)A105+ENP optional
2)Spiral wound construction.
Carbon Steel ASTM Materials
18Cr-9Ni-2Mo
A216-WCB A351-CF8M A216-WCB A351-CF8M A182-F3041l A182-F316 A276-304 A276-316 A105+ENP A182-F316
Glass Filled PTFE A313-304 lnconel X-750
NPR Vrron
NBR �,
Vrron n,
Graphrre+304L1 Graphite+316 �,
NBR Vrron
A313-304 A313-316 A216-WCB A182-F316 A193-B7 A193-B8 A194-2H A194-8 A276-304 A276-316 304+PTFE 316+PTFE
A216-WCB A351-CF8M A193-B7 A193-B8
Carbon Steel Carbon Steel+Zn Carbon Steel
Dimensional datas of ANSI Class 600Lb NPS 2 2''2 3 4 6 8 10 12 14 16 18 20 24 26
DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650
L/1 11.50 13.00 14.00 17.00 22.00 26.00 31.00 33.00 35.00 39.00 43.00 47.00 55.00 57.00 (RF/BW) 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1448
L2 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 57.50 (RTJ) 295 333 359 435 562 664 791 841 892 994 1095 1200 1407 1461
H 7.12 7.62 8.50 9.50 21.25 25.00 26.12 31.12 31.88 36.38 38.75 44.50 46.62 52.50 180 193 215 241 540 635 665 790 810 925 985 1130 1185 1335
w 14 16 20 20 24 24 24 24 32 32 32 32 32 32
350 400 500 500 600 600 600 600 800 800 800 800 800 800
wt(kg) 26 35 58 81 142 287 540 780 1000 1300 1700 2100 3400 3800
19 25 42 51 85 200 395 610 805 1010 1350 1656 2775 3125
Dimensional datas of ANSI Class 900Lb NPS 2 2 1/2 3 4 6 8 10 12 14 16 18 20
DN 50 65 80 100 150 200 250 300 350 400 450 500
L/L1 14.50 16.50 15.00 18.00 24.00 29.00 33.00 38.00 40.50 44.50 48.00 52.00 (RF/BW) 368 419 381 457 610 737 838 965 1029 1130 1219 1321
L2 14.62 16.62 15.12 18.12 24.12 29.12 33.12 38.12 40.88 11.88 48.50 52.50 (RTJ) 371 422 384 460 613 740 841 968 1038 1140 1232 1334
8.62 9.25 10.25 15.38 25.75 30.25 31.75 38.00 38.50 45.00 47.00 53.50 H 219 235 260 390 655 770 805 965 980 1145 1195 1360
20 20 20 24 24 24 24 32 32 32 32 32 w
500 500 500 600 600 600 600 800 800 800 800 800
wt(kg) 31 43 68 98 171 345 650 940 1205 1565 2050 2535 23 31 51 61 102 240 480 735 965 1215 1625 1995
Carbon Steel
A352-LCB A352-LCB
A182-F3041l
A276-304 A350-LF2+ENP
A313-304 Vrton
Vrton
Graphrre+304"'1
Vrton
A313-304 A182-F304
A320-L7 A194-4
A276-304 304+PTFE A352-LCB A193-B7
Carbon Steel
28 in
700 mm
61.00 in 1549 mm 61.50 in 1562 mm 57.00 in 1450 mm
32 in 800 mm
4500 R F/RTJ 3790 BW
24 in
600 mm
61.00 in 1549 mm 61.75 in 1568 mm 56.00 in 1425 mm
32 in 800 mm
3950 RF/RTJ 3335 BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Trunnion Mounted,Cast Steel Ball Valve 1500Lb/2500Lb
Applicable Standards: eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE.AP! 607
eANTI STATICS,API 608
eSTEEL VALVES.ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
21
Dimensional datas
NPS DN L/L1 L2
(RF/BWI (RTJ)
L1
H
(/) CL
z
I
L2
ANSI Class1500Lb
2 50 14.50 368 14.62 371 11.25 285 20
21/2 65 16.50 419 16.62 422 12.00 305 20
3 80 18.50 470 18.62 473 13.25 338 24
4 100 21.50 546 21.62 549 20.00 506 24
6 150 27.75 705 28.00 711 33.50 852 24
8 200 32.75 832 33.12 841 39.38 1000 32
10 250 39.00 991 39.38 1000 41.12 1045 32
12 300 44.50 1130 45.12 1146 49.38 1255 32
1 4 350 49.50 1257 20.25 1276 50.00 1270 32
1 6 400 54.50 1384 44.38 1407 58.50 1485 32
i n mm in mm in mm in mm in
w
500
500
600
600
600
800
800
800
800
800
mm
Design descriptions: eFULL PORT DESIGN
e BB.BOLTED BONNET.SPLIT BODY
eTHREE PIECES BODY FOR 12" & ABOVE
eTRUNNION MOUNTED BALL TYPE
e BLOW-OUT PROOF STEM
e FIRE SAFE CONSTRUCTION
eANTI STATICS DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of parts
No Part Name
1 Body 2 Bonnet
3 Ball
4 Stem
5 Seat
6 Seat Insert
7 Seat Spring
8 SeatO-Ring
9 StemO-Ring
10 Bonnet Gasket
11 Bonnet 0-Ring
12 Antistatic Spring
13 Lower Cover
14 Bonnet Stud
15 Bonnet Stud Nut
16 Trunnion
17 Trunnion Bearng
18 Gland Flange
19 Gland Bolt
20 Stop Plate
21 Handle Note: 1 )A 1 OS+ENP optional
2)Spiral wound construction.
WT(kgl L/L1
(RF/BWI
49 33 17.75 451
67 44 20.00 508
100 73 22.75 578
153 87 26.50 673
� 145 36.00 914
Carbon Steel ASTM Materials
18Cr-9Ni-2Mo
A216-WCB /'>:351-CF8M
A216-WCB /'>:351-CF8M
A182-F3041l A182-F316
A276-304 A276-316
A105+ENP A182-F316
Glass Filled PTfE
A313-304 lnconel X -7'3J
NPR Vrton
NBR Vrton
Graphite+3042l Graphite+3162l
NBR Vrton
A313-304 A313-316
A216-WCB A182-F316
A193-B7 A193-B8
A194-2H A194-8
A276-304 A276-316
304+PTfE 316+PTfE
A216-WCB /'>:351-CF8M
A193-B7 A193-B8
Caroon Steel Caroon Steel+Zn
Caroon Steel
L2 H w
(RTJ)
ANSI Class2500Lb
17.88 454 12.00 304 20
21.25 540 12.88 327 24
23.00 584 14.25 362 24
26.88 683 21.25 540 24
36.50 927 35.88 911 32
540 345 40.25 1022 40.88 1038 42.12 1070 32
1020 685 50.00 1270 50.88 1292 44.00 1120 32
1475 1050 56.00 1422 56.88 1445 53.00 1345 32
188.5 1385 - - - - - - -
2455 1735 - - - - - - -
RFJITTJ BW in mm in mm in mm in
Carbon Steel
/1:352-LCB
/1:352-LCB
A182-F3041l
A276-304
A350-LF2+ENP
A313-304
Vrton
Vrton
Graphite+3042l
Viton
A313-304
A182-F304
A320-L7
A194-4
A276-304
304+PTfE
/1:352-LCB
A193-B7
Carbon Steel
WT(kgl
500 55 41
600 76 55
600 120 91
600 173 110
800 3)2 182
800 612 430
800 1150 855
800 1665 1315 - - -
- - -
mm RF!RTJ BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Ball Valve FS, FL
Design Ranges of Materials The steel ball valves are designed and manufactured to provide maximum service life
and dependability. All ball valves are full ported and meet the design requirements of American Petroleum Institute standard API 608&API 60 British standard 885351
and generally conform to American Society of Mechanical Engineers standard ASME B 16.34 valves are available in a complete range of body/bonnet materials and trims.
Standard body/bonnet materials include nine grades of carbon, low alloy ardstainless
steel, for special applications they can be supplied in other grades of alloy and
stainless steel, there's a full range of trim materials to match any service optional
packing and gasket materials are available for a full range of service conditions.
Available Modifications Trim changes
End connection modifications
Packing and gasket changes
Operator mounting
Handwheel extensions
�Operation Extended lever for easy operation. Also available
with gearing, motor
actuators, pneumatic or
hydraulic actuators for more difficult services
�Packing
Std packing multiple v-teflon
packing, combined with live
loading, maintains packing
compression under high-cycle and severe service
applications. Graphite
packing is used for high-temperature situation.
[;JGrease-jet joint Installed in prescriptive
part accord to the apply and satisfied with
ecumenical situations and realize seal in spot with
maintenance easily.
�SLB
Self-lubrication bearing.
Easy operation, low torque and
longer life
BPS Blow-out proof stem.
A pressure-safe stem.
Shoulder design that protects
against failure under excess
pressure.
Pressure equalizing
ASORFS
Customer specified coatings
Weld end bore changes
Oxygen & chlorine cleaning & packaging
�Body&Bonnet I!] BORE Split or 3-piece,split body Full bcre or reduced bore .
& bonnet for 8' & small. Full-bcre design provides
Disassembles easily exceptional ftow control.
for repair or replacement of
internal components.
[:::JAS UFS
Anti statics. A metallic contact Fire safe. designed to API
is always granted between ball 607 or BS 6755 to grant their
and stem /body to discharge operation suitability in case
eventual statics build-up during of fire. Secondary metal-
service. to metal seal acts as back
up if primary seal is
destroyed by fire. Valves
ordered for compliance with
API 607 will be provided with
graphite packing and gaskets.
� End Connectios A choice of flanged RT J flanged or buttwelding
end for piping flexibility.
lOGasket Std gasket or dou-gasket.
Std gasket adopt high-
performance rubber seal
ring. Dou-gasket adopt
high-performance rubber seal ring and spiral wound
graphite.
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Floating,Forged Steel Ball Valve 150Lb
Applicable Standards: eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE.AP! 607
eANTI STATICS,API 608
eSTEEL VALVES,ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
13
l
en Cl.
z
I
Dimensional datas of ANSI Class 150Lb NPS 1/2 3/4 1 11/2 2
DN 15 20 25 40 50
L 4.25 4.62 5.00 6.50 7.00 (RF) 108 117 127 165 178
L1 5.50 6.00 6.50 7.50 8.50 (BW) 140 152 165 190 216
H 2.12 2.12 2.50 3.38 4.00
55 55 65 85 100
w 8 8 12 12 166
200 200 300 300 400
wt(kg) 3.1 4.1 6 9.5 12.8
2.6 3.9 5.2 8.7 11.8
Design descriptions: eFULL PORT DESIGN
e BB.SOL TED BONNET.SPLIT BODY
eFLOATING BALL TYPE
e BLOW-OUT PROOF STEM
e FIRE SAFE CONSTRUCTION
eANTI STATICS DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of parts
No Part Name Carbon Steel ASTM Materials
Carbon Steel
1 Bodv 2 Bonnet 3 Ball 4 Stem 5 SeatRinq 6 Bonnet Gasket 7 Bonnet Stud 8 Bonnet Stud Nut 9 Packinq
10 Gland Flanqe 11 Gland Bolt 12 Stop Plate 13 Handle
Note: 1)A105+ENP optional
2)Spiral wound construction.
21/2 3 4
65 80 100
7.50 8.00 9.00 190 203 229 9.50 11.12 12.00 241 283 305
6.00 7.00 9.25 150 180 235 16 24 24
400 600 600
20 26 45 19 28 47
18Cr-9Ni-2Mo
A105 A182-F316 A350-LF2 A105 A182-F316 A350-LF2
A182-F3041l A182-F316 A182-F3041l
A276-304 A276-316 A276-304 RPTFE
Graohrre+3Q42l PTFE Graohrre+3042l
A193-B7 A193-B8 A320-L7 A194-2H A194-8 A194-4
PTFE
A105 A182-F316 A350-LF2 A193-B7 A193-B8 A193-B7
Carbon Steel Carbon Steel+Zn Carbon Steel Carbon Steel
6 8 10 12 in
150 200 250 300 mm
15.50 18.00 21.00 24.00 in 394 457 533 610 mm
18.00 20.50 22.00 25.00 in 457 521 559 635 mm
9.88 11.00 12.62 15.38 in 250 280 320 390 mm
24 24 32 32 in 600 600 800 800 mm
126 216 270 378 RF 131 226 295 393 BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Roating,Forged Steel Ball Valve 300Lb/600Lb
Applicable Standards: eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE.AP! 607
eANTI STATICS,API 608
eSTEEL VALVES,ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
13
L
Cf) Cl.
z
Dimensional datas of ANSI Class 300Lb NPS V2 3/4 1 1 11z 2
DN 15 20 25 40 50
L 5.50 6.00 6.50 7.50 8.50 (RF) 140 152 165 190 216
L1 5.50 6.00 6.50 7.50 8.50 (BW) 140 152 165 190 216
H 2.12 2.12 2.50 3.38 16.00
55 55 65 85 400
w 8 8 12 12 10
200 200 300 300 250
wt(kg) 3.5 4.6 6.7 10.5 14.5
2.8 3.1 4.4 5.5 8.7
Dimensional datas of ANSI Class 600Lb
NPS V2 3/4 1 1 11z 2
DN 15 20 25 40 50
UL1 6.50 7.50 8.50 9.50 11.50 (RF/BW) 165 190 216 241 292
L2 - - - - 11.62 (RTJ) - - - - 295
H 2.25 2.25 2.62 3.50 4.12
58 58 68 89 105
w 8 12 12 16 16
200 300 300 400 400
wt(kg) 4.5 5.5 8 12.5 18
3.8 4.1 5.6 7 12
Design descriptions: eFULL PORT DESIGN
e BB.SOL TED BONNET.SPLIT BODY
eFLOATING BALL TYPE
e BLOW-OUT PROOF STEM
e FIRE SAFE CONSTRUCTION
eANTI STATICS DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of parts
No Part Name Carbon Steel ASTM Materials
Carbon Steel
1 Rnrlv
2 Bonnet 3 Ball 4 Stem 5 Seat Ring 6 Bonnet Gasket 7 Bonnet Stud 8 Bonnet Stud Nut 9 Packing 10 Gland Flange 11 Gland Bolt 12 Stop Plate 13 Handle
Note: 1 )A 1 OS+ENP optional
2)Spiral wound construction.
211z 3 4
66 80 100
9.50 11.12 12.00
241 283 305
9.50 11.12 12.00
241 283 305
16.00 24.00 24.00
400 600 600
12 14 19
300 350 480
22 29 50
13.5 17 31
211z 3 4
66 80 100
13.00 14.00 17.00
330 356 432
13.12 14.12 17.12
333 359 435
6.25 7.50 9.75
158 190 247
24 24 24
600 600 600
27 35 61
18 23 43
18Cr-9Ni-2Mo
A105 A182-F316 A350-LF2 A105 A182-F316 A350-LF2
A182-F3041l A182-F316 A182-F3041l
A276-304 A276-316 A276-304 R.PTFE
Graphite+3042l PTFE Graphite+3042l
A193-B7 A193-B8 A320-L7 A194-2H A194-8 A194-4
PTFE A105 A182-F316 A350-LF2
A193-B7 A193-B8 A193-B7 Carbon Steel Carbon Steel+Zn Carbon Steel
Carbon Steel
6 8 10 12 in
150 200 250 300 mm
15.88 19.75 22.38 25.50 in
403 502 568 648 mm
18.00 20.50 22.00 25.00 in
457 521 559 635 mm
9.88 11.00 12.62 15.38 in
250 280 320 390 mm
24 24 32 32 in
600 600 800 800 mm
141 242 302 423 RF
108 194 234 325 BW
6 8 10 12 in
150 200 250 300 mm
22.00 - - - in
559 - - - �-16
22.12 - - - in
562 - - - mm
10.38 - - - in
262 - - - mm
32 - - - in
800 - - - mm
172 - - - RF
139 - - - BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Ball Valve FS, TM
Design Ranges of Materials The steel ball valves are designed manufactured to provide maximum service life
and dependability. All ball valves are full ported and meet the design requirements of American Petroleum Institute standard API 608&API 60, British standard BS 5351 and generally conform to American Society of Mechanical Engineers standard ASME 816.34 valves are available in a complete range of body/bonnet materials and trims.
Standard body/bonnet materials include nine grades of carbon, I ow alloy and stainless steels, for special applications they can be supplied in other grades of alloy and stainless steel, there's a full range of trim materials to match any service optional packing and gasket materials are available for a full range of service conditions.
Available Modifications Trim changes
End connection modifications Packing and gasket changes
Operator mounting Handwheel extensions
�Operation Extended lever for easy operation. Also available with gearing, motor actuators, pneumatic or hydraulic actuators for more difficult services
[;!Packing
Std packing multiple v-teflon packing, combined with live loading, maintains packing compression under highcycle and severe service applications. Graphite packing is used for hightemperature situation.
[;]Grease-jet joint Installed in prescriptive part accord to the apply and satisfied with ecumenical situations and realize seal in spot with maintenance easily.
�AS
Anti statics. A metallic contact is always granted between ball and stem /body to discharge eventual statics build-up during service.
Pressure equalizing ASORFS Customer specified coatings Weld end bore changes
Oxygen&chlorine cleaning&packaging
[i3 Body&Bonnet Split or 3-piece,split body& bonnet for 8' & smal I. Disassembles easily for repair or replacement of internal components.
[:JDBB
Double block&bleed.The body cavity is isolated when the ball is in either fully closed or fully opened position, the medium entrapped in it can easily be bled to avoid over pressure.
[!]BORE Full bore or reduced bore . Full-bore design provides exceptional flow control.
UFS
Fire Safe. Designed to APl607 or BS 6755 to grant their operation suitability in case of fire. Secondary metal-to metal seal acts as backup if primary seal is destroyed by fire. Valves ordered for compliance with API 607 will be provided with graphite packing and gaskets.
[;!End Connectios A choice of flanged RT J flanged or buttwelding end for piping flexibility.
�Gasket
Adopt high-performance rubber seal ring and spiral wound graphite.
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Trunnion Mounted,Forged Steel Ball Valve 1501.b/300Lb
Applicable Standards: eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE,API 607
eANTI STATICS,API 608
eSTEEL VALVES,ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
21
L1
"' 0..-
Design descriptions: eFULL PORT DESIGN
e BB.BOLTED BONNET.SPLIT BODY
eTHREE PIECES BODY FOR 12"&ABOVE
eTRUNNION MOUNTED BALL TYPE e BLOW-OUT PROOF STEM
e FIRE SAFE CONSTRUCTION
eANTI STATICS DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of parts
No Part Name
1 Bodv 2 Bonnet 3 Ball 4 Stem 5 Seat 6 Seat Insert 7 SeatSorina 8 SeatO-Rina 9 StemO-Rina 10 Bonnet Gasket 11 Bonnet 0-rina 12 Antistat ic Sorina 13 Lower Cover 14 Bonnet Stud 15 Bonnet Stud Nut 16 Trunn ion 17 Trunnion Bearina 18 Gland 19 Gland Bolt 20 StooPlate 21 Handle
Note: 1 )A 1 OS+ENP optional
2)Spiral wound construction.
Carbon Steel ASTM Materials
18Cr-9Ni-2Mo
A105 A182-F316 A105 A182-F316
A182-F3041l A182-F316 A276-304 A276-316 A105+ENP A182-F316
Glass Riled P1fE A313-304 lnconel X-750
NBR Vilon NBR Vilon
Graohite+3042l Graohite+3162l
NBR Vilon A313-304 A313-316 A182-F304 A182-F316 A193-B7 A193-B8 A194-2H A194-8 A276-304 A276-316 304+P1fE 316+P1fE
A105 A182-F316 A193-B7 A193-B8
Carbon Steel Carbon Steel+Zn Carbon Steel
Carbon Steel
A350-LF2 A350-LF2
A182-F3041l
A276-304 A350-LF2+ENP
A313-304 Viton Vilon
Graphite+3042l
Vilon A313-304
A182-F304 A320-L7 A194-4
A276-304 304+P1fE A350-LF2 A193-B7
Carbon Steel
Dimensional datas of ANSI Class 150Lb NPS 2 2'/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in
DN 50 66 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 mm
L 7.00 7.50 8.00 9.00 15.50 18.00 21.00 24.00 27.00 30.00 34.00 36.00 42.00 45.00 49.00 51.00 54.00 60.00 in (RF) 178 190 203 229 394 457 533 610 686 762 864 914 1067 1143 1245 1295 1372 1524 mm
L1 8.50 9.50 11.12 12.00 18.00 20.50 22.00 25.00 30.00 33.00 36.00 39.00 45.00 49.00 53.00 55.00 60.00 68.00 in (BW) 216 241 283 305 457 521 559 635 762 838 914 991 1143 1245 1346 1397 1524 1727 mm
H 4.00 6.00 700 9.25 9.88 11.00 12.62 15.38 16.50 21.88 23.62 25.00 28.00 29.50 31.50 34.00 36.00 38.50 in 120 150 180 235 250 280 320 390 420 555 600 635 710 750 800 865 915 980 mm
w 16 16 24 24 24 24 32 32 32 32 32 32 32 40 40 40 40 40 in
400 400 600 600 600 600 800 800 800 800 800 800 800 1000 1000 1000 1000 1000 mm
wt(kg) 28 35 55 80 190 290 445 570 780 1520 2300 2500 3950 4890 6300 7100 8950 13500 RF 25 28 49 71 182 277 553 553 747 1481 2266 2460 3904 4939 6362 8149 9000 13570 BW
Dimensional datas of ANSI Class 300Lb NPS 2 2'/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 36 in
DN 50 66 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800 900 mm
L 8.50 9.50 11.12 12.00 15.88 19.75 22.38 25.50 30.00 33.00 36.00 39.00 45.00 49.00 53.00 55.00 60.00 - in (RF) 216 241 283 305 403 502 568 648 762 838 914 991 1143 1245 1346 1397 1524 - mm
L1 8.50 9.50 11.12 12.00 18.00 20.50 22.00 25.00 30.00 33.00 36.00 39.00 45.00 49.00 53.00 55.00 60.00 - in (BW) 216 241 283 305 403 521 559 635 762 838 914 991 1143 1245 1346 1397 1524 - mm
4.00 6.00 700 9.25 9.88 11.00 12.62 15.38 16.50 21.88 23.62 25.00 28.00 29.50 31.50 34.00 36.00 - in H
120 150 180 235 250 280 320 390 420 555 600 635 710 750 800 865 915 - mm
w 16 16 24 24 24 24 32 32 32 32 32 32 32 40 40 40 40 - in
400 400 600 600 600 600 800 800 800 800 800 800 800 1000 1000 1000 1000 - mm
wt(kg) 30 40 60 90 200 325 490 690 900 1810 2620 2860 4430 5430 6810 7655 9590 - RF 24 31 49 72 169 280 424 598 872 1665 2440 2635 4075 4880 6225 7115 9230 - BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Trunnion Mounted,Forged Steel Ball Valve 600Lb/900Lb
Applicable Standards: eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE,API 607
eANTI STATICS,API 608
eSTEEL VALVES,ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
21
L1
"' 0..-
Design descriptions: eFULL PORT DESIGN
e BB.BOLTED BONNET.SPLIT BODY
eTHREE PIECES BODY FOR 12"&ABOVE
eTRUNNION MOUNTED BALL TYPE e BLOW-OUT PROOF STEM
e FIRE SAFE CONSTRUCTION
eANTI STATICS DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of parts
No Part Name
1 Bodv 2 Bonnet 3 Ball 4 Stem 5 Seat 6 Seat Insert 7 SeatSorina 8 SeatO-Rina 9 StemO-Rina
10 Bonnet Gasket 11 Bonnet 0-rina 12 Antistatic Sorina 13 Lower Cover 14 Bonnet Stud 15 Bonnet Stud Nut 16 Trunnion 17 Trunnion Bearina 18 Gland 19 Gland Bolt 20 StooPlate 21 Handle
Note: 1 )A 1 OS+ENP optional
2)Spiral wound construction.
Carbon Steel ASTM Materials
18Cr-9Ni-2Mo
A105 A182-F316 A105 A182-F316
A182-F3041l A182-F316 A276-304 A276-316 A105+ENP A182-F316
Glass Riled P1fE A313-304 lnconel X-750
NBR Vilon NBR Vilon
Graohite+3042l Graohite+3162l
NBR Vilon A313-304 A313-316 A182-F304 A182-F316 A193-B7 A193-B8 A194-2H A194-8 A276-304 A276-316 304+P1fE 316+P1fE
A105 A182-F316 A193-B7 A193-B8
Carbon Steel Carbon Steel+Zn Carbon Steel
Dimensional datas of ANSI Class 600Lb NPS 2 2 1/2 3 4 6 8 10 12 14 16 18 20 24 26
DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650
l..A..1 11.50 1300 14.00 17.00 22.00 26.00 31.00 33.00 35.00 39.00 43.00 47.00 55.00 57.00 (RF/BW) 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1448
L2 11.62 13.12 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 57.50 (RTJ) 295 333 359 435 562 664 791 841 892 994 1095 1200 1407 1461
H 6.50 700 7.88 11.00 12.25 14.00 16.12 18.00 19.25 21.00 24.88 25.62 30.12 31.88
165 180 200 280 310 355 410 455 490 535 630 650 765 810
w 16 24 24 24 32 32 32 32 32 32 40 40 40 40
400 600 600 600 800 800 800 800 800 800 1000 1000 1000 1000
wt(kg) 34 53 65 125 245 505 640 910 1380 2250 3400 3850 4900 6700
27 43 49 95 188 418 495 740 1185 1960 3050 3406 4275 6025
Dimensional datas of ANSI Class 900Lb NPS 2 21/2 3 4 6 8 10 12 14 16 18 20
DN 50 65 80 100 150 200 250 300 350 400 450 500
l..A..1 14.50 16.50 15.00 18.00 24.00 29.00 33.00 38.00 40.50 44.50 48.00 52.00 (RF/BW) 368 419 381 457 610 737 965 965 1029 1130 1219 1321
L2 14.62 16.62 15.12 18.12 24.12 29.12 38.12 38.12 40.88 44.88 48.50 52.50 (RTJ) 371 422 384 460 613 740 968 968 1038 1140 1232 1334
H 6.72 7.50 8.25 11.38 12.62 15.38 18.50 18.50 20.88 24.00 26.00 27.50
170 190 210 290 320 390 470 470 530 610 660 700
w 24 24 24 32 32 32 32 32 32 40 40 40
600 600 600 800 800 800 800 500 800 1000 1000 1000
wt(kg) 45 65 73 135 360 650 1350 1350 1890 3100 4300 4950
37 53 56 98 291 545 1145 1145 1650 2750 3875 4410
Carbon Steel
A350-LF2 A350-LF2
A182-F3041l
A276-304 A350-LF2+ENP
A313-304 Viton Vilon
Graphite+3042l
Vilon A313-304 A182-F304 A320-L7 A194-4
A276-304 304+P1fE A350-LF2 A193-B7
Carbon Steel
28 in
700 mm
61.00 in
1549 mm
61.50 in
1562 mm
34.62 in
880 mm
40 in
1000 mm
8300 R F
7590 BW
24 in
600 mm
61.00 in
1549 mm
61.75 in
1568 mm
30.75 in
780 mm
40 in
1000 mm
7100 RF/RTJ 6485 BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Trunnion Mounted,Forged Steel Ball Valve 1500Lb/2500Lb
Applicable Standards:
21
eSTEEL BALL VALVES API 608/API 60
eSTEEL BALL VALVES ISO 14313
eFIRE SAFE,API 607
eANTI STATICS,API 608
eSTEEL VALVES,ASME 816.34
eFACE TO FACE ASME 816.10
eEND FLANGES,ASME 816.5
e BUTIWELDING ENDS ASME B 16.25
e INSPECTION AND TEST, API 598/ API 60
Dimensional datas
NPS DN L/L1 L2
(RF/BWI (RTJ)
L1
H
(/) Q.z
ANSI Class1500Lb
2 50 14.50 368 14.62 371 6.75 170 24 2'/2 65 16.50 419 16.62 422 7.50 190 24
3 80 18.50 470 18.62 473 5.25 210 32 4 100 21.50 546 21.62 549 11.38 290 32 6 150 27.75 705 28.00 711 13.00 330 32 8 200 32.75 832 33.12 841 15.75 400 32
10 250 39.00 991 39.38 1000 17.38 440 32 12 300 44.50 1130 45.12 1146 22.00 560 40 14 350 49.50 1257 50.25 1276 25.25 640 40 16 400 54.50 1384 55.38 1407 27.12 690 40 in mm in mm in mm in mm in
Design descriptions: eFULL PORT DESIGN
e BB.BOLTED BONNET.SPLIT BODY
eTHREE PIECES BODY FOR 12"&ABOVE
eTRUNNION MOUNTED BALL TYPE e BLOW-OUT PROOF STEM
e FIRE SAFE CONSTRUCTION
eANTI STATICS DEVICE
eSTOPPER DEVICE
elS05211 MOUNTING PAD
e FLANGED OR BUTIWELDING ENDS
e AVAi LAB LE WITH WG OPERA TOR
Materials of parts
No Part Name Carbon Steel ASTM Materials
18Cr-9Ni-2Mo
1 Body A105 A182-F316 2 Bonnet A105 A182-F316 3 Ball A182-F3041l A182-F316 4 Stem A276-304 A276-316 5 Seat A105+ENP A182-F316 6 Seat Insert Glass Filled PTFE 7 Seat Spring A313-304 lnconel X -7'3J 8 SeatO-Ring NBR Vrton 9 StemO-Ring NBR Vrton
10 Bonnet Gasket Graphite+3CJ42l Graphite+3162l
11 Bonnet 0-ring NBR Vrton 12 Antistatic Spring A313-304 A313-316 13 Lower Cover A182-F304 A182-F316 14 Bonnet Stud A193-B7 A193-B8 15 Bonnet Stud Nut A194-2H A194-8 16 Trunnion A276-304 A276-316 17 Trunnion Bearng 304+PTFE 316+PTFE 18 Gland A105 A182-F316 19 Gland Bolt A193-B7 A193-B8 20 Stop Plate Carbon Steel Carbon Steel+Zn 21 Handle Carbon Steel
N e: )A 1 OS+ENP optional )Spiral wound construction.
L2
Carbon Steel
A350-LF2 A350-LF2
A182-F3CJ41l
A276-304 A350-LF2+ENP
A313-304 Vrton Vrton
Graphite+3CJ42l
Viton A313-304 A182-F304 A320-L7 A194-4
A276-304 304+PTFE A350-LF2 A193-B7
Carbon Steel
w WT(kgl L/L1 L2
H w WT(kgl (RF/BWI (RTJ)
ANSI Class2500Lb
600 5.5 40 17.75 451 17.88 454 7.50 190 24 600 68 57 600 75 55 20.00 508 21.25 540 9.00 230 32 800 95 74 800 95 65 22.75 578 2 3.00 584 11.00 280 32 800 120 91 800 1SJ 115 26.50 673 26.88 683 14.12 360 32 800 185 122 800 540 420 36.00 914 36.50 927 15.75 400 32 800 675 555 800 800 685 40.25 1022 40.88 1038 18.88 480 40 1000 1100 918 800 1300 1025 50.00 1270 50.88 1292 20.50 520 40 1000 16SJ 1355
1000 1900 1555 56.00 1422 56.88 1445 26.38 670 40 1000 2300 1950 1000 3100 2600 - - - - - - - - - -
1000 46SJ 3930 - - - - - - - - - -
mm RFJITTJ bw in mm in mm in mm in mm RF!RTJ BW
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Top Entry Combination Ball Valve
Applicable Standards: DESIGN & MANUFACTURE CONFORM WITH: API 60/ISO 14313, ASME 816.34
CONNECTION DIMENSION CONFORMS WTIH: ASME 816.5, ON EN 1092
FIRE RESISTANCE DESIGN CONFORMS WITH: API 607/ISO 10497
INSPECTION & TEST CONFORMS WITH: API 60, ISO 5208, API 598
MATERIAL CONFORMS WITH: ISO 15156
Features and Application:
No
1
2
3
4
5
6
7
8
9
10
11
Part Name
Body
Lid
Ball
Seat
Sealing ring
0-ring
Stem
Seat grease injection valve
Spring
Blow-down valve
Ball lubrieating bearing
No Part Name
12 Screw
13 Body gasket
14 Support cover
15 Seat retainer ring
16 Spring support cover
17 Packing
18 Connected disk
19 Elastic cylindrical pin
20 Flat key
21 Stem gasket
22 Antistatic spring
This product is a new type top entry combination ball valve.the seat can be installed and move around the body. Through the thread, the outer margin of the
seat connected to the retainer ring. There is spring on the support cover, which installed on the valve body, and the retainer ring can compress spring.
The fabrication holes are on the outer margin of the seat and the retainer ring. This new type product adopts total body design, the compensation can
be automatically, the possibility of leakage is small, safety in use, vibrate resistance, and double seal. The ball is installed from the top part, so can finsish
the maintenance without removing the pipe, it is very convenient.
Materials of parts
Body WCB/LCB/CF8M/CF8/CF3M/CF3/WC6/WC9/CD3MN
Lid WCB/LCB/CF8M/CF8/CF3M/CF3/WC6/WC9/CD3MN
Ball A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Seat A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Stem A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Seat ring PTFE/MYLON/PEEK/TEFLON
0--ring VITON/NBR
Bolt B7M/B8M/L 7M/B 16M
Support cover A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Spring 17 -4PH/17 -?PH/I nconel
Bearing 304+PTFE/316+PTFE
Gasket Flexible graphite+PTFE
Materials could be choosed according to customers' requirement & working condition.
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Top Entry Combination Ball Valve 150Lb/300Lb
Applicable Standards: DESIGN & MANUFACTURE CONFORM WITH: API 60/ISO 14313, ASME 816.34
CONNECTION DIMENSION CONFORMS WTIH: ASME 816.5, ON EN 1092
FIRE RESISTANCE DESIGN CONFORMS WITH: API 607/ISO 10497
INSPECTION & TEST CONFORMS WITH: API 60, ISO 5208, API 598
MATERIAL CONFORMS WITH: ISO 15156
Dimensional datas NPS inch
2
3
4
*6
*8
*10
*12
DN
50
80
100
150
200
250
300
A
mm
292
356
432
559
660
787
838
B
mm
51
76
100
150
201
252
303
Dimensional datas NPS inch
2
3
4
*6
*8
*10
*12
DN
50
80
100
150
200
250
300
Note: *Turbine drives
A B
mm mm
292 51
356 76
432 100
559 150
660 201
787 252
838 303
A
H1
mm
207
223
280
275
321
355
470
H1
mm
211
226
286
282
325
360
420
w
mm
300
400
450
460
460
6CX)
6CX)
w
mm
300
500
550
460
460
6CX)
6CX)
BW RJ
WT T NPS kg N.m inch
ANSI Class 150Lb
30 50 *14
57 65 *16
100 151 *18
215 320 *20
407 1020 *24
560 1085 *28
710 1562 *30
WT T NPS kg N.m inch
ANSI Class 300Lb
36 86 *14
63 110 *16
106 270 *18
221 500 *20
412 1620 *24
566 1824 *28
715 2632 *30
DN
350
400
450
500
6CX)
700
750
DN
350
400
450
500
6CX)
700
750
A
mm
889
991
1092
1194
1397
1549
1651
A
mm
889
991
1092
1194
1397
1549
1651
A
B
mm
334
385
436
487
589
684
735
B
mm
334
385
436
487
589
684
735
H1
mm
455
460
503
560
610
730
800
H1
mm
460
480
508
565
617
678
738
w
mm
6CX)
6CX)
6CX)
700
700
700
760
w
mm
6CX)
6CX)
6CX)
6CX)
760
760
760
"' --
WT
kg
760
1100
1512
1930
3200
46CXl
5630
WT
kg
766
1106
1519
2010
3208
4607
5638
T
N.m
2426
3016
4574
6016
9750
14540
18005
T
N.m
3800
5376
8000
10610
17280
25102
31664
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Top Entry Combination Ball Valve 600Lb'SOOLb/1500Lb
Applicable Standards: DESIGN & MANUFACTURE CONFORM WITH: API 60/ISO 14313, ASME 616.34
CONNECTION DIMENSION CONFORMS WTIH: ASME B 16.5, DN EN 1092
FIRE RESISTANCE DESIGN CONFORMS WITH: API 607/ISO 10497
INSPECTION & TEST CONFORMS WITH: API 60, 1805208, API 598
MATERIAL CONFORMS WITH: ISO 15156
A
Dimensional datas NPS inch
2
3
4
*6
*8
*10
*12
DN
50
80
100
150
200
250
300
A
mm
292
356
432
559
660
787
838
B
mm
51
76
100
150
201
252
303
Dimensional datas NPS inch
2
3
4
*6
*8
*10
DN
50
80
100
150
200
250
A
mm
368
381
457
610
737
838
B
mm
49
74
100
150
201
252
Dimensional datas NPS inch
2
3
4
*6
*8
DN
50
80
100
150
200
Note:* Turbine drives
A
mm
368
470
546
705
832
B
mm
49
74
100
144
192
H1
mm
215
232
294
287
324
365
480
H1
mm
212
227
277
283
334
380
H1
mm
212
236
295
303
354
w
mm
500
600
600
600
600
600
700
w
mm
650
700
800
600
600
600
w
mm
600
930
460
600
600
BW RJ
WT T NPS
kg N.m inch
ANSI Class 600Lb
41 148 *14
67 200 *16
110 460 *18
226 908 *20
417 2560 *24
570 3048 *28
720 4300 *30
WT T NPS
kg N.m inch
52
110
200
430
800
1000
WT
kg
56
153
278
600
1100
ANSI Class 900Lb
208 *12
280 *14
650 *16
1298 *18
3596 *20
4306 *24
T NPS
N.m inch
ANSI Class 1500Lb
330 *10
440 *12
1034 *14
2084 *16
5496 *18
DN
350
400
450
500
600
700
750
DN
300
350
400
450
500
600
DN
250
300
350
400
450
A
mm
889
991
1092
1194
1397
1549
1651
A
mm
965
1029
1130
1219
1321
1549
A
mm
991
1130
1257
1384
1477
A
B
mm
334
385
436
487
589
684
735
B
mm
303
322
373
423
471
589
B
mm
239
287
315
360
405
H1
mm
465
470
512
570
622
742
817
H1
mm
507
520
538
580
625
690
H1
mm
398
520
560
570
592
w
mm
700
700
760
760
760
760
850
w
mm
700
700
760
760
760
850
w
mm
700
700
760
760
760
WT
kg
770
1112
1523
1940
3213
4612
5640
WT
kg
1300
1695
2560
3400
4400
7200
WT
kg
1438
2017
2612
3890
5100
T
N.m
7255
9174
13520
18034
29512
42264
58864
T
N.m
6000
10220
12968
19054
25452
38655
T
N.m
6720
14520
32600
49650
66350
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Full Welded Trunnion Mounted Ball Valve
Applicable Standards: DESIGN & MANUFACTURE CONFORM WITH: API 60/ ISO 14313, ASME B16.34
CONNECTION DIMENSION CONFORMS WTIH: ASME 816.25, DIN EN 12627
FIRE RESISTANCE DESIGN CONFORMS WITH: API 607/ISO 10497
INSPECTION & TEST CONFORMS WITH: API 60, 1805208, API 598
MATERIAL CONFORMS WITH: ISO 15156
Materials of parts No Part Name
1 Body
2 Left-right body
3 Ball
4 Seat
5 Sealing ring
6 0-ring
7 Stem
8 Seat grease injection valve
9 Spring
10 straight pin
11 Blow-down vavle
No Part Name
12 Ball lubricating bearing
13 Screw
14 Bonnet gasket
15 Support cover
16 Die holder
17 Packing
18 Terminal pad
19 Spring pin
20 Flat key
21 Stem gasket
22 Static-free spring
Materials of parts
Body A 105/LF2/F304/F316/F304L/F316L/F11 /F22/F51
Ball A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Seat A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Stem A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Sealing ring PTFE/NYLON/PEEK/TEFLON
0-ring VITON/NBR
Screw B7M/BBM/L 7M/B 16M
Support cover A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Die holder A 105+ENP/LF2+ENP/F304/F316/F304L/F316L/F51
Spring 17-4PH/17-7PH/lnconel
Bearing 304+PTFE/316+PTFE
Gasket Flexible graphite+304/PTFE
Materials could be choosed according to customers' requirement & working condition.
Ground extended product structure diagram
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Full Welded Trunnion Mounted Ball Valve 150Lb/300Lb
Applicable Standards: DESIGN & MANUFACTURE CONFORM WITH: API 60/ ISO 14313, ASME B16.34
CONNECTION DIMENSION CONFORMS WTIH: ASME 816.25, DIN EN 12627
FIRE RESISTANCE DESIGN CONFORMS WITH: API 607/ISO 10497
INSPECTION & TEST CONFORMS WITH: API 60, 1805208, API 598
MATERIAL CONFORMS WITH: ISO 15156
A
Dimensional datas NPS inch
2
3
4
*6
*8
*10
*12
DN
50
80
100
150
200
250
300
A
mm
216
283
305
457
521
559
635
B
mm
51
76
100
150
201
252
303
Dimensional datas NPS inch
2
3
4
*6
*8
*10
*12
DN
50
80
100
150
200
250
300
Note:* Turbine drives
A
mm
216
283
305
457
521
559
635
B
mm
51
76
100
150
201
252
303
H1
mm
146
170
204
260
300
340
385
H1
mm
170
185
210
260
310
345
390
w
w
mm
300
400
450
460
460
600
600
w
mm
300
500
550
460
460
600
600
WT T NPS
kg N.m inch
ANSI Class 150Lb
12 50 *14
28 65 *16
42 151 *18
125 320 *20
220 1020 *24
340 1085 *28
520 1562 *30
WT T NPS
kg N.m inch
ANSI Class 300Lb
16 86 *14
35 110 *16
60 270 *18
150 500 *20
250 1620 *24
350 1824 *28
580 2632 *30
DN
350
400
450
500
600
700
750
DN
350
400
450
500
600
700
750
A
mm
762
838
914
991
1143
1346
1397
A
mm
762
838
914
991
1143
1346
1397
' -·- ---·.J·---·-·-·-
A
B
mm
334
385
436
487
589
684
735
B
mm
334
385
436
487
589
684
735
H1
mm
410
460
520
560
600
730
840
H1
mm
420
470
530
590
600
750
850
w
mm
600
600
600
700
700
700
760
w
mm
600
600
600
600
760
760
760
WT
kg
860
980
1210
1760
2010
3200
4120
WT
kg
980
1210
1520
2010
2520
3600
4620
T
N.m
2426
3016
4574
6016
9750
14540
18005
T
N.m
3800
5376
8000
10610
17280
25012
31664
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Full Welded Trunnion Mounted Ball Valve 600Lb/900Lb/1500Lb
Applicable Standards: DESIGN & MANUFACTURE CONFORM WITH: API 60/ ISO 14313, ASME 816.34
CONNECTION DIMENSION CONFORMS WTIH: ASME 816.25, DIN EN 12627
FIRE RESISTANCE DESIGN CONFORMS WITH: API 607/ISO 10497
INSPECTION&TEST CONFORMSWITH: APl6D, 1505208, APl598
MATERIAL CONFORMS WITH: ISO 15156
Dimensional datas NPS inch
2
3
4
*6
*8
*10
*12
DN
50
80
100
150
200
250
300
A
mm
292
356
432
559
660
787
838
B
mm
51
76
100
150
201
252
303
Dimensional datas NPS inch
2
3
4
*6
*8
*10
DN
50
80
100
150
200
250
A
mm
368
381
457
610
737
838
B
mm
49
74
100
150
201
252
Dimensional datas NPS inch
2
3
4
*6
DN
50
80
100
150
Note:* Turbine drives
A
mm
368
470
546
705
B
mm
49
74
100
144
A
H1
mm
185
190
220
270
320
350
400
H1
mm
180
208
222
270
325
360
H1
mm
175
232
395
300
w
mm
500
600
600
600
600
600
700
w
mm
650
700
800
600
600
600
w
mm
600
930
460
600
w
WT T NPS
kg N.m inch
ANSI Class 600Lb
27 148 *14
48 200 *16
95 460 *18
210 908 *20
405 2560 *24
655 3048 *28
915 4300 *30
WT T NPS
kg N.m inch
40
70
110
255
525
810
WT
kg
50
115
170
402
ANSI Class 900Lb
208 *12
280 *14
650 *16
1298 *18
3596 *20
4306 *24
T NPS
N.m inch
ANSI Class 1500Lb
330 *8
440 *10
1034 *12
2084 *14
DN
350
400
450
500
600
700
750
DN
300
350
400
450
500
600
DN
200
250
300
350
A
mm
889
991
1092
1194
1397
1549
1651
A
mm
965
1029
1130
1219
1321
1549
A
mm
832
991
1130
1257
A
B
mm
3:34
385
436
487
589
684
735
B
mm
303
322
373
423
471
589
B
mm
192
239
287
315
H1
mm
450
500
560
620
750
880
960
H1
mm
450
550
650
750
830
950
H1
mm
360
410
500
560
w
mm
700
700
760
760
760
760
850
w
mm
700
700
760
760
760
850
w
mm
600
700
700
760
CD-
WT
kg
1228
1705
2380
2875
4830
5900
7200
WT
kg
1270
1515
2420
2740
3325
4800
WT
kg
580
1120
1492
2140
T
N.m
7255
9174
13520
18034
29512
42264
58864
T
N.m
6000
10220
12968
19054
25452
38655
T
N.m
5496
6720
14520
32600
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Hard Seal Ball Valve
Applicable Standards: DESIGN & MANUFACTURE CONFORM WITH: API 608, ASME 816.34
CONNECTION DIMENSION CONFORMS WTIH: ASME 816.5, DIN EN 1092
FIRE RESISTANCE DESIGN CONFORMS WITH: API 607/ISO 10497
INSPECTION & TEST CONFORMS WITH: ISO 5208, API 598
MATERIAL CONFORMS WITH: ISO 15156
No Part Name No Part Name
1 Body 9 Spring 2 Left-right body 10 Seat washer 3 Ball 11 Screw
4 Seat 12 Packing bushing 5 Graphite sealing ring 13 Packing
6 Pressure ring 14 Bushing
7 Stem 15 Nut
8 Lower lid 16 Stud
Characteristics & Application
I
1. The product is suitable for harsh work conditions, can be used for a wide temperature range, such as the high temperature, corrosive media and so on.
2 .The tungsten-chromium alloy solid stainless steel seat firmed by the spring, this kind of design can be applied to a wide range of operating conditions, it not only
inproves the seal performance, but also has the excellent features of long service life and maintenance-free.
3 .The stable torque is easy to use, and cheaper in cost.
4 .High-quality sealing performance depends on a high level of processing technology, through this way the ball can have a close contact with seat.
5. Even in a low temperature, the spring installed in the seat can also ensure the ball have a close contact with the seat, so in a wide temperature range, under
high-pressure difference and high frequency, the torque can still be open and closed stably.
6. composed of different materials, the valve can be used for different temperatures, up to 500° c(932° F)
7 .After the surface-hardening treatment, the ball valve seat can be more widely used, on as cement, paper pulp, as well as other corrosive occasions, and
have a long lifetime. What's more, the fixed ball with an unique design is suitable for the media containing dust.
Materials of parts
Body WCB/A 105/CF8M/F316/CF8/F304/CF3M
F316L/CF3/F304L/CD3MN/F51
Bonnet WCB/A 105/CF8M/F316/CF8/F304/CF3M
F316L/CF3/F304L/CD3MN/F51
Ball ( F304/F316/F304L/F316L/F51 ) +lonitriding/Hard Chromium/Nialloy surfacing
Seat ( F304/F316/F304L/F316L/F51 ) +Stellite
Stem F6a/ A 105+ EN P/F304/F316/F304L/F316L/F51
Sealing ring Flexible graphite
Lower lid A 105+ EN P/F316/F304/F316UF304UF51
Bolt B7M/B8M
Nut B7M/B8M
Packing Flexible graphite
Spring 17 -4PH/I nconel series
Bushing ( 304/316) +Ion nitriding
Seal gasket 304+Flexible graphite
Materials could be choosed according to customers' requirement & working condition.
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Floating Structure 150Lb/300Lb/600Lb
Floating Structure Series
Worm-gear actuator
Thrust Body Bearing Stem Body Spring Seat
Flexible graphite is of If the packing become loose. The spring can relieve the high-temperature and the convex side of the stem pipe stress and heat expansion, fire resistance function. can play a role in the prevention to ensure the stability of
from stem belch out. the operation
Dimensional datas NPS
DN A B H1 w WT T NPS
DN A B
inch mm mm mm mm kg N.m inch mm mm
ANSI Class 150Lb
1/2 15 108 13 60 200 2.5 5 2'/2 65 191 65 3/4 20 117 19 65 200 3.5 8 3 80 203 76
25 127 25 75 250 5.8 11 4 100 229 100
1'/2 40 165 32 98 350 7.5 25 *6 150 394 150
2 50 178 51 128 350 11 45 *8 200 457 201
Dimensional datas NPS
DN A B H1 w WT T NPS
DN A B
inch mm mm mm mm kg N.m inch mm mm
ANSI Class 300Lb
1/2 15 140 13 60 200 3 11 2'/2 65 241 65 3/4 20 152 19 65 200 5 18 3 80 383 76
25 165 25 75 250 8 40 4 100 305 100
1'/2 40 191 32 98 350 11 57 *6 150 403 150
2 50 216 51 128 350 18 90 *8 200 502 201
Dimensional datas NPS
DN A B H1 w WT T NPS
DN A B
inch mm mm mm mm kg N.m inch mm mm
ANSI Class 600Lb
2 50 292 51 150 450 28 266 3 80 356 76
2'/2 65 330 65 180 450 45 504 *4 100 432 100
Note: * Worm-gear actuator
w
Body Seat
Through the co-operation of the seat ring and the body, ball valve can maintain a stable operation in working temperature range-29"CC-500"C
H1 w WT T
mm mm kg N.m
160 600 18 80
190 600 25 120 210 700 38 150 360 460 106 600 523 600 180 1050
H1 w WT T
mm mm kg N.m
160 600 30 160 190 600 40 221 210 700 65 392 360 600 122 1240 523 600 246 2100
H1 w WT T
mm mm kg N.m
210 700 40 644 270 600 65 1078
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
FD<ed Structure 150Lb/300Lb
Flexible graphite is of high-temperature and fire resistance function.
Dimensional datas
NPS
inch
2
21
/2
3
4
*6
*8
DN
50
65
80
100
150
200
A
mm
178
191
203
229
394
457
B
mm
51
65
76
100
150
201
Dimensional datas
NPS inch
2
21
/2
3
4
*6
*8
DN
50
65
80
100
150
200
A
mm
216
241
283
305
403
502
Note: * Worm-gear actuator
B
mm
51
65
76
100
150
201
H1
mm
172
184
196
225
290
320
H1
mm
172
184
196
225
295
325
w
mm
350
400
500
650
460
600
w
mm
350
400
500
650
600
600
Thrust Bearing
If the packing become loose, the convex side of the stem can play a role in the prevention from stem belch out.
WT T NPS
kg N.m inch
ANSI Class 150Lb
16 72 *10
26 92 *12
35 123 *14
51 240 *16
103 640 *18
170 1082 *20
WT T NPS
kg N.m inch
ANSI Class 300Lb
22 119 *10
34 149 *12
45 255 *14
92 402 *16
180 680 *18
246 1620 *20
DN
250
300
350
400
450
500
DN
250
300
350
400
450
500
Fixed Structure Series
w
Manual operated
Through the co-operation of the seat ring and the body, ball valve can maintain a stable operation in working temperature range-29"CC-500"C
A
mm
533
610
686
762
864
914
A
mm
568
648
762
838
914
991
B
mm
252
303
334
385
436
487
B
mm
252
303
334
385
436
487
H1
mm
350
380
415
450
490
540
H1
mm
356
388
425
466
502
550
w
mm
600
600
600
700
700
700
w
mm
600
600
700
700
700
760
WT
kg
280
460
580
790
930
1288
WT
kg
310
512
612
1010
1183
1353
T
N.m
1437
2152
3234
3797
4574
6875
T
N.m
2170
2985
4030
6424
9963
13213
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]
Flexible graphite is of high-temperature and fire resistance function.
Dimensional datas
NPS inch
2
3
4
*6
*8
DN
50
80
100
150
200
A
mm
292
356
432
559
660
B
mm
51
76
100
150
201
Dimensional datas
NPS inch
2
3
*4
*6
DN
50
80
100
150
A
mm
368
381
457
610
B
mm
49
74
100
150
Dimensional datas
NPS inch
2
3
*4
DN
50
80
100
A
mm
368
470
546
Note: * Worm-gear actuator
B
mm
49
74
100
H1
mm
185
205
235
300
350
H1
mm
190
208
238
312
H1
mm
190
210
240
Fixed Structure 600Lb/900Lb/1500Lb
BW RJ
Thrust Bearing
If the packing become loose, the convex side of the stem can play a role in the prevention from stem belch out.
w
mm
500
600
600
600
600
w
mm
650
700
600
600
w
mm
650
750
600
WT T NPS
kg N.m inch
ANSI Class 600Lb
30 148 *10
56 200 *12
84 460 *14
230 908 *16
350 2560 *18
WT T NPS
kg N.m inch
45
78
120
255
WT
kg
45
116
170
ANSI Class 900Lb
296 *8
342 *10
1230 *12
2319 *14
T NPS
N.m inch
ANSI Class 1500Lb
507 *6
1080 *8
1981 *10
DN
250
300
350
400
450
DN
200
250
300
350
DN
150
200
250
Fixed Structure Series
w
Manual operated
Through the co-operation of the seat ring and the body, ball valve can maintain a stable operation in working temperature range-29"CC-500"C
A
mm
787
838
889
991
1092
A
mm
737
838
965
1029
A
mm
705
832
991
B
mm
252
303
334
385
436
B
mm
201
252
303
322
B
mm
144
192
239
H1
mm
362
398
435
478
522
H1
mm
340
372
420
465
H1
mm
315
350
388
w
mm
700
700
700
760
760
w
mm
600
700
700
760
w
mm
600
600
700
WT
kg
600
830
1140
1530
2120
WT
kg
520
810
1050
1386
WT
kg
430
630
1188
T
N.m
4021
5567
9695
12103
19031
T
N.m
5351
7683
13178
18383
T
N.m
3814
9380
14466
www.tododeinoxidable.com Torreón Coahuila México (871) 1937074 / 75 [email protected]