6Ball valves 6L2- to 5-way ball valves (Series 6L) in PP, natural PP, PVDF and PFA. Manual operated.
Page 690
Ball valves 6D2- to 4-way ball valves (Series 6L) with pneumatic part-turn actuator (STANDARD).
Page 702
Ball valves 6G2- to 5-way ball valves (Series 6L) wit electric actuator (STANDARD).
Page 709
Ball valves 6R2- to 5-way ball valves (Series 6L) with electric actuator (COMPACT).
Page 716
Ball valves 6A7- to 11-way ball valves in PVDF and PTFE, manual operated.
Page 721
Ball valves 6E7- to 11-way ball valves (Series 6A) with electrical part-turn actuator (STANDARD).
Page 724
Multiport ball valves 6XMultiport ball valves 6X with pneumatic part-turn actuator (STANDARD), for controling twomedia flows synchronously.
Page 727
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 684
6Multiport ball valves 6YMultiport ball valves 6Y with electrical part-turn actuator, for controling two media flows syn-chronously.
Page 729
Multiport ball valves 6ZMultiport ball valves 6Z, manual operated, for controling two media flows synchronously.
Page 731
Laboratory valves 6MSmall 2- and 3-way laboratory valves in PTFE.
Page 734
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 685
Type Version thread acutator
2-way ball valves6L701F6L801F
G-threadNPT-thread M P E
3-way ball valves6L702F*6L802F*
6L732F6L832F
6L733F6L833F
G-threadNPT-thread M P E
4-way ball valves6L741F6L841F
6L744F6L844F
G-threadNPT-thread M P E
5-way ball valves6L750F*6L850F*
G-threadNPT-thread M E
M manual P pneumatic E electrical6L 6D 6R
6G
Type Version Thread Acutator
7-way ball valves6A770F
G-thread M E
9-way ball valves6A790F
G-thread M E
11-way ball valves
6A711F
G-thread M E
M manual E electrical6A 6E
6 Getting Started: Ball Valves
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 686
2-way with through bore
3-way, vertical, with angled bore 3-way, horizontal, with angled bore
3-way, horizontal, with T-bore
4-way with double L bore 4-way with through bore
5-way with angled bore
6 Switching Diagrams
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 687
1. Available for all ball valves 6A (7- to 11-way) and 6L (2- to 5-way)2. Initiator with standardised output > can be connected to PLC3. Reed switch: (passive solenoid switch) > No operating voltage required
Our position indicators have been tried and tested in industrial applications together with our Series 6A and 6L manually acutated ball valves. These allow you to accurately detect the current position of a ball valve – a com-mon component in complex systems and plants – at any time and even remotely from a control room, for in-stance. The position indicators are available in two distinct models.
Position indicator with initiator:Nearly entirely free of wear, the position is detected by an electrically acutated initiator. This model includes a standardised outout that can be connected to a programmable logic controller (PLC).
Position indicator with reed switch:This cost-effective model detects the position using a current-independent reed switch, i.e., a magnetic switch that requires no supply voltage. Due to their design, Series 6A ball valves can be retrofitted by emtechnik. Posi-tion indicators for Series 6L ball valves can be retrofitted on location by the operator.
6 Position Indicators
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 688
Panel mounting:For mounting on panels, the ball valves are sup-plied with a male thread on top and a loose hex-agon nut. They are quick and straight-forward to fit.Panel thickness max. 7 mm.
Panel mounting
Mounting bracket:Mounting brackets can be used for wall mount-ing
Mounting bracket for wall mounting
Fastening clips:Fastening clips are only used for wall mounting. They are straightforward to use and quick to fit.
Fastening clips for wall mounting
6 Fastening Systems
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 689
6 Ball Valves 6L – Safe and compact
1. Thread seam-less in accordance with DIN, USAS or JIS⇒Numerous connection options
2. Nominal diameter DN 03 to DN 10 high KV value⇒Good flow rate even with soiled media
3. Sealing sleeve made of PTFE⇒Max. media resistance
4. Stem sealing with O-ring
5. Ball and stem made in one piece⇒Maximum tightness
6. Simultaneous centring and sealing of the ball⇒Maximum tightness also at the connections
7. On reqest as bulkhead ball valve available
Ball valves have proven their worth in practice: wherever aggressive gases and liquids are to be safely and reliably shut-off,isolated, mixed or distributed, a ball valve is ideal for a variety of tasks. The Series 6L ball valves are light and compact. They areavailable in various nominal diameters and versions with female G- or NPTthreads – from the simple 2-way valve to the versatile5-way valve – on request in a bulkhead version. The materials available such as PP, natural PP, PVDF and PFA, provide highmedia resistance and thus offer a wide range of applications. A special fastening system makes assembly straightforward whereverrequired.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 690
6 Ball valve (Series 6L), 2-way
Article-Nr Nominal Diameter Connection Material
6L701F02116PFFP DN02 G1/16" PFA/FPM
6L701F02116PNFP DN02 G1/16" PP-NATUR/FPM
6L701F02116PPEP DN02 G1/16" PP/EPDM
6L701F02116PPFP DN02 G1/16" PP/FPM
6L701F02116PVFP DN02 G1/16" PVDF/FPM
6L701F0318PPEP DN03 G1/8" PP/EPDM
6L701F0318PPFP DN03 G1/8" PP/FPM
6L701F0318PVFP DN03 G1/8" PVDF/FPM
6L801F0318PPFP DN03 NPT1/8" PP/FPM
6L801F0318PVFP DN03 NPT1/8" PVDF/FPM
6L701F0414PFEP DN04 G1/4" PFA/EPDM
6L701F0414PFFK DN04 G1/4" PFA/FFKM
6L701F0414PFFP DN04 G1/4" PFA/FPM
6L701F0414PPELFP DN04 G1/4" PP-EL/FPM
6L701F0414PNEP DN04 G1/4" PP-NATURE/EPDM
6L701F0414PNFP DN04 G1/4" PP-NATURE/FPM
6L701F0414PPEP DN04 G1/4" PP/EPDM
6L701F0414PPFP DN04 G1/4" PP/FPM
6L701F0414PVEP DN04 G1/4" PVDF/EPDM
6L701F0414PVFK DN04 G1/4" PVDF/FFKM
6L701F0414PVFP DN04 G1/4" PVDF/FPM
6L801F0414PFEP DN04 NPT1/4" PFA/EPDM
6L801F0414PFFK DN04 NPT1/4" PFA/FFKM
6L801F0414PFFP DN04 NPT1/4" PFA/FPM
6L801F0414PNFP DN04 NPT1/4" PP-NATURE/FPM
6L801F0414PPEP DN04 NPT1/4" PP/EPDM
6L801F0414PPFP DN04 NPT1/4" PP/FPM
6L801F0414PVFK DN04 NPT1/4" PVDF/FFKM
6L801F0414PVFP DN04 NPT1/4" PVDF/FPM
6L701F0614PFEP DN06 G1/4" PFA/EPDM
6L701F0614PFFK DN06 G1/4" PFA/FFKM
6L701F0614PFFP DN06 G1/4" PFA/FPM
6L701F0614PPELFP DN06 G1/4" PP-EL/FPM
6L701F0614PNFP DN06 G1/4" PP-NATURE/FPM
6L701F0614PPEP DN06 G1/4" PP/EPDM
6L701F0614PPFK DN06 G1/4" PP/FFKM
6L701F0614PPFP DN06 G1/4" PP/FPM
6L701F0614PVEP DN06 G1/4" PVDF/EPDM
6L701F0614PVFK DN06 G1/4" PVDF/FFKM
6L701F0614PVFP DN06 G1/4" PVDF/FPM
6L701F0812PNFP DN08 G1/2" PP-NATURE/FPM
6L701F0812PPEP DN08 G1/2" PP/EPDM
6L701F0812PPFP DN08 G1/2" PP/FPM
6L701F0812PVFP DN08 G1/2" PVDF/FPM
6L801F0812PFEP DN08 NPT1/2" PFA/EPDM
6L801F0812PFFK DN08 NPT1/2" PFA/FFKM
6L801F0812PFFP DN08 NPT1/2" PFA/FPM
6L801F0812PNFP DN08 NPT1/2" PP-NATURE/FPM
6L801F0812PPFP DN08 NPT1/2" PP/FPM
6L801F0812PVFK DN08 NPT1/2" PVDF/FFKM
6L801F0812PVFP DN08 NPT1/2" PVDF/FPM
6L701F1012PFEP DN10 G1/2" PFA/EPDM
6L701F1012PFFK DN10 G1/2" PFA/FFKM
6L701F1012PFFP DN10 G1/2" PFA/FPM
6L701F1012PNEP DN10 G1/2" PP-NATURE/EPDM
6L701F1012PNFP DN10 G1/2" PP-NATURE/FPM
6L701F1012PPEP DN10 G1/2" PP/EPDM
6L701F1012PPFP DN10 G1/2" PP/FPM
6L701F1012PVEP DN10 G1/2" PVDF/EPDM
6L701F1012PVFK DN10 G1/2" PVDF/FFKM
6L701F1012PVFP DN10 G1/2" PVDF/FPM
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 691
6 Ball valve (Series 6L), 2-way
Dimensions 6L701F. . ., 6L801F. . .
G/NPT D B L L1 L2 l ~H
1/16" 12 12 39 13.5 6 23.4 16.2
1/8" 16 23 52 13 12 39 26
1/4" 20 32 65 15 16 45.8 33
1/2" 32 49 100 22 23 58 49
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6L. . .
Kvs-value DN02 DN 03 DN 04 DN 06 DN 08 DN 10
6L701. . . 0.2 m3/h 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L702. . . 0.15 m3/h 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L732. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L733. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L741. . . ./. 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L744. . . ./. 0.25 m3/h 0.45 m3/h 0.65 m3/h ./. ./.
6L750. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L801. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.9 m3/h ./.
6L802. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
6L832. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L833. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L841. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.6 m3/h ./.
6L844. . . ./. 0.25 m3/h 0.45 m3/h ./. ./. ./.
6L850. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN10 PN10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 692
6 Ball valve (Series 6L), 3-way, vertical, with L-bore
Article-Nr Nominal Diameter Connection Material
6L702F02116PVFP DN02 G1/16" PVDF/FPM
6L702F0318PVFP DN03 G1/8" PVDF/FPM
6L702F0414PFFK DN04 G1/4" PFA/FFKM
6L702F0414PFFP DN04 G1/4" PFA/FPM
6L702F0414PPFP DN04 G1/4" PP/FPM
6L702F0414PVEP DN04 G1/4" PVDF/EPDM
6L702F0414PVFK DN04 G1/4" PVDF/FFKM
6L702F0414PVFP DN04 G1/4" PVDF/FPM
6L802F0414PFFK DN04 NPT1/4" PFA/FFKM
6L802F0414PFFP DN04 NPT1/4" PFA/FPM
6L802F0414PPEP DN04 NPT1/4" PP/EPDM
6L802F0414PPFP DN04 NPT1/4" PP/FPM
6L802F0414PVEP DN04 NPT1/4" PVDF/EPDM
6L802F0414PVFK DN04 NPT1/4" PVDF/FFKM
6L802F0414PVFP DN04 NPT1/4" PVDF/FPM
6L702F0614PFFP DN06 G1/4" PFA/FPM
6L702F0614PPFP DN06 G1/4" PP/FPM
6L702F0614PVFP DN06 G1/4" PVDF/FPM
Dimensions 6L702F. . ., 6L802F. . .
G/NPT D B L L1 L2 l ~H
1/16" 12 12 39 13.5 19.5 23.4 16.2
1/8" 16 23 52 13 26 39 26
1/4" 20 32 65 15 32.5 45.8 33
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6L. . .
Kvs-value DN02 DN 03 DN 04 DN 06 DN 08 DN 10
6L701. . . 0.2 m3/h 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L702. . . 0.15 m3/h 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L732. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L733. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L741. . . ./. 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L744. . . ./. 0.25 m3/h 0.45 m3/h 0.65 m3/h ./. ./.
6L750. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L801. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.9 m3/h ./.
6L802. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
6L832. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L833. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L841. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.6 m3/h ./.
6L844. . . ./. 0.25 m3/h 0.45 m3/h ./. ./. ./.
6L850. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN10 PN10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 693
6 Ball valve (Series 6L), 3-way, horizontal, withL-bore
Article-Nr Nominal Diameter Connection Material
6L732F0318PPEP DN03 G1/8" PP/EPDM
6L732F0318PPFP DN03 G1/8" PP/FPM
6L732F0318PVFP DN03 G1/8" PVDF/FPM
6L832F0318PPFP DN03 NPT1/8" PP/FPM
6L832F0318PVFP DN03 NPT1/8" PVDF/FPM
6L732F0414PFFK DN04 G1/4" PFA/FFKM
6L732F0414PFFP DN04 G1/4" PFA/FPM
6L732F0414PNFP DN04 G1/4" PP-NATURE/FPM
6L732F0414PPEP DN04 G1/4" PP/EPDM
6L732F0414PPFP DN04 G1/4" PP/FPM
6L732F0414PVEP DN04 G1/4" PVDF/EPDM
6L732F0414PVFK DN04 G1/4" PVDF/FFKM
6L732F0414PVFP DN04 G1/4" PVDF/FPM
6L832F0414PFFK DN04 NPT1/4" PFA/FFKM
6L832F0414PFFP DN04 NPT1/4" PFA/FPM
6L832F0414PNFP DN04 NPT1/4" PP-NATURE/FPM
6L832F0414PPFP DN04 NPT1/4" PP/FPM
6L832F0414PVFK DN04 NPT1/4" PVDF/FFKM
6L832F0414PVFP DN04 NPT1/4" PVDF/FPM
6L732F0614PFFK DN06 G1/4" PFA/FFKM
6L732F0614PFFP DN06 G1/4" PFA/FPM
6L732F0614PNFP DN06 G1/4" PP-NATURE/FPM
6L732F0614PPEP DN06 G1/4" PP/EPDM
6L732F0614PPFP DN06 G1/4" PP/FPM
6L732F0614PVEP DN06 G1/4" PVDF/EPDM
6L732F0614PVFK DN06 G1/4" PVDF/FFKM
6L732F0614PVFP DN06 G1/4" PVDF/FPM
6L732F0812PPFP DN08 G1/2" PP/FPM
6L832F0812PFFP DN08 NPT1/2" PFA/FPM
6L832F0812PNFP DN08 NPT1/2" PP-NATURE/FPM
6L832F0812PPFP DN08 NPT1/2" PP/FPM
6L832F0812PVFK DN08 NPT1/2" PVDF/FFKM
6L832F0812PVFP DN08 NPT1/2" PVDF/FPM
6L732F1012PFFK DN10 G1/2" PFA/FFKM
6L732F1012PFFP DN10 G1/2" PFA/FPM
6L732F1012PNFP DN10 G1/2" PP-NATURE/FPM
6L732F1012PPEP DN10 G1/2" PP/EPDM
6L732F1012PPFK DN10 G1/2" PP/FFKM
6L732F1012PPFP DN10 G1/2" PP/FPM
6L732F1012PVFK DN10 G1/2" PVDF/FFKM
6L732F1012PVFP DN10 G1/2" PVDF/FPM
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 694
6 Ball valve (Series 6L), 3-way, horizontal, withL-bore
Dimensions 6L732F. . ., 6L832F. . .
G/NPT D B L L1 L2 l ~H
1/8" 16 37.5 52 13 12 39 26
1/4" 20 48.5 65 15 16 45.8 33
1/2" 30 74.5 100 22 23 58 49
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6L. . .
Kvs-value DN02 DN 03 DN 04 DN 06 DN 08 DN 10
6L701. . . 0.2 m3/h 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L702. . . 0.15 m3/h 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L732. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L733. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L741. . . ./. 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L744. . . ./. 0.25 m3/h 0.45 m3/h 0.65 m3/h ./. ./.
6L750. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L801. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.9 m3/h ./.
6L802. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
6L832. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L833. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L841. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.6 m3/h ./.
6L844. . . ./. 0.25 m3/h 0.45 m3/h ./. ./. ./.
6L850. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN10 PN10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 695
6 Ball valve (Series 6L), 3-way, horizontal, withT-bore
Article-Nr Nominal Diameter Connection Material
6L733F0318PPFP DN03 G1/8" PP/FPM
6L733F0318PVFP DN03 G1/8" PVDF/FPM
6L733F0414PFFK DN04 G1/4" PFA/FFKM
6L733F0414PFFP DN04 G1/4" PFA/FPM
6L733F0414PNFP DN04 G1/4" PP-NATURE/FPM
6L733F0414PPEP DN04 G1/4" PP/EPDM
6L733F0414PPFP DN04 G1/4" PP/FPM
6L733F0414PVEP DN04 G1/4" PVDF/EPDM
6L733F0414PVFK DN04 G1/4" PVDF/FFKM
6L733F0414PVFP DN04 G1/4" PVDF/FPM
6L833F0414PFFK DN04 NPT1/4" PFA/FFKM
6L833F0414PFFP DN04 NPT1/4" PFA/FPM
6L833F0414PVFK DN04 NPT1/4" PVDF/FFKM
6L833F0414PVFP DN04 NPT1/4" PVDF/FPM
6L733F0614PFFK DN06 G1/4" PFA/FFKM
6L733F0614PFFP DN06 G1/4" PFA/FPM
6L733F0614PPELFP DN06 G1/4" PP-EL/FPM
6L733F0614PPEP DN06 G1/4" PP/EPDM
6L733F0614PPFP DN06 G1/4" PP/FPM
6L733F0614PVEP DN06 G1/4" PVDF/EPDM
6L733F0614PVFP DN06 G1/4" PVDF/FPM
6L833F0812PFEP DN08 NPT1/2" PFA/EPDM
6L833F0812PFFP DN08 NPT1/2" PFA/FPM
6L833F0812PVEP DN08 NPT1/2" PVDF/EPDM
6L833F0812PVFP DN08 NPT1/2" PVDF/FPM
6L733F1012PFEP DN10 G1/2" PFA/EPDM
6L733F1012PFFK DN10 G1/2" PFA/FFKM
6L733F1012PFFP DN10 G1/2" PFA/FPM
6L733F1012PNFP DN10 G1/2" PP-NATURE/FPM
6L733F1012PPEP DN10 G1/2" PP/EPDM
6L733F1012PPFP DN10 G1/2" PP/FPM
6L733F1012PVEP DN10 G1/2" PVDF/EPDM
6L733F1012PVFK DN10 G1/2" PVDF/FFKM
6L733F1012PVFP DN10 G1/2" PVDF/FPM
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 696
6 Ball valve (Series 6L), 3-way, horizontal, withT-bore
Dimensions 6L733F. . ., 6L833F. . .
G/NPT D B L L1 L2 l ~H
1/8" 16 37.5 52 13 12 39 26
1/4" 20 48.5 65 15 16 45.8 33
1/2" 30 74.5 100 22 23 58 49
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6L. . .
Kvs-value DN02 DN 03 DN 04 DN 06 DN 08 DN 10
6L701. . . 0.2 m3/h 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L702. . . 0.15 m3/h 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L732. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L733. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L741. . . ./. 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L744. . . ./. 0.25 m3/h 0.45 m3/h 0.65 m3/h ./. ./.
6L750. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L801. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.9 m3/h ./.
6L802. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
6L832. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L833. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L841. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.6 m3/h ./.
6L844. . . ./. 0.25 m3/h 0.45 m3/h ./. ./. ./.
6L850. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN10 PN10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 697
6 Ball valve (Series 6L), 4-way, with through bore
Article-Nr Nominal Diameter Connection Material
6L741F0414PFFP DN04 G1/4" PFA/FPM
6L741F0414PPFP DN04 G1/4" PP/FPM
6L741F0414PVFP DN04 G1/4" PVDF/FPM
6L741F0614PNFP DN06 G1/4" PP-NATURE/FPM
6L741F1012PPFP DN10 G1/2" PP/FPM
6L741F0612PVFP DN10 G1/2" PVDF/FPM
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6L. . .
Kvs-value DN02 DN 03 DN 04 DN 06 DN 08 DN 10
6L701. . . 0.2 m3/h 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L702. . . 0.15 m3/h 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L732. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L733. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L741. . . ./. 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L744. . . ./. 0.25 m3/h 0.45 m3/h 0.65 m3/h ./. ./.
6L750. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L801. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.9 m3/h ./.
6L802. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
6L832. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L833. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L841. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.6 m3/h ./.
6L844. . . ./. 0.25 m3/h 0.45 m3/h ./. ./. ./.
6L850. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN10 PN10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 698
6 Ball valve (Series 6L), 4-way, with double L-bore
Article-Nr Nominal Diameter Connection Material
6L744F0318PVFP DN03 G1/8" PVDF/FPM
6L744F0414PFFK DN04 G1/4" PFA/FFKM
6L744F0414PFFP DN04 G1/4" PFA/FPM
6L744F0414PNFP DN04 G1/4" PP-NATURE/FPM
6L744F0414PPEP DN04 G1/4" PP/EPDM
6L744F0414PPFP DN04 G1/4" PP/FPM
6L744F0414PVEP DN04 G1/4" PVDF/EPDM
6L744F0414PVFK DN04 G1/4" PVDF/FFKM
6L744F0414PVFP DN04 G1/4" PVDF/FPM
6L844F0414PFFP DN04 NPT1/4" PFA/FPM
6L844F0414PPFP DN04 NPT1/4" PP/FPM
6L844F0414PVFP DN04 NPT1/4" PVDF/FPM
6L744F0612PFFP DN06 G1/2" PFA/FPM
6L744F0612PPEP DN06 G1/2" PP/EPDM
6L744F0612PPFP DN06 G1/2" PP/FPM
6L744F0612PVFP DN06 G1/2" PVDF/FPM
Dimensions 6L741. . ., 6L841. . ., 6L744F. . ., 6L844F. . .
G/NPT D L L1 L2 l ~H
1/8" 16 52 13 12 39 26
1/4" 20 65 15 16 45.8 33
1/2" 30 100 22 23 58 49
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6L. . .
Kvs-value DN02 DN 03 DN 04 DN 06 DN 08 DN 10
6L701. . . 0.2 m3/h 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L702. . . 0.15 m3/h 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L732. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L733. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L741. . . ./. 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L744. . . ./. 0.25 m3/h 0.45 m3/h 0.65 m3/h ./. ./.
6L750. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L801. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.9 m3/h ./.
6L802. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
6L832. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L833. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L841. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.6 m3/h ./.
6L844. . . ./. 0.25 m3/h 0.45 m3/h ./. ./. ./.
6L850. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN10 PN10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 699
6 Ball valve (Series 6L), 5-way, with L-bore
Article-Nr Nominal Diameter Connection Material
6L750F0318PPFP DN03 G1/8" PP/FPM
6L750F0318PVFP DN03 G1/8" PVDF/FPM
6L750F0414PFFK DN04 G1/4" PFA/FFKM
6L750F0414PFFP DN04 G1/4" PFA/FPM
6L750F0414PPFP DN04 G1/4" PP/FPM
6L750F0414PVEP DN04 G1/4" PVDF/EPDM
6L750F0414PVFK DN04 G1/4" PVDF/FFKM
6L750F0414PVFP DN04 G1/4" PVDF/FPM
6L850F0414PFFP DN04 NPT1/4" PFA/FPM
6L850F0414PPFP DN04 NPT1/4" PP/FPM
6L850F0414PVFP DN04 NPT1/4" PVDF/FPM
Dimensions 6L750F. . ., 6L850F. . .
G/NPT D L L1 L2 l ~H
1/8" 16 52 13 26 39 26
1/4" 20 65 15 32.5 45.8 33
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6L. . .
Kvs-value DN02 DN 03 DN 04 DN 06 DN 08 DN 10
6L701. . . 0.2 m3/h 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L702. . . 0.15 m3/h 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L732. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L733. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6L741. . . ./. 0.5 m3/h 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6L744. . . ./. 0.25 m3/h 0.45 m3/h 0.65 m3/h ./. ./.
6L750. . . ./. 0.4 m3/h 0.58 m3/h 0.85 m3/h ./. ./.
6L801. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.9 m3/h ./.
6L802. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
6L832. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L833. . . ./. 0.4 m3/h 0.58 m3/h ./. 1.6 m3/h ./.
6L841. . . ./. 0.5 m3/h 0.61 m3/h ./. 1.6 m3/h ./.
6L844. . . ./. 0.25 m3/h 0.45 m3/h ./. ./. ./.
6L850. . . ./. 0.4 m3/h 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN10 PN10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 700
6 Ball valve (Series 6L) with T-union and integratedcheck valve
Article-Nr Nominal Diameter A, B Connection C Material
6S4477PPFP 2xG3/8" 1xG1/8" PP/FPM
6S4477PVFP 2xG3/8" 1xG1/8" PVDF/FPM
Dimensions 6S4477. . .
G G1 L ~L1 D B
1/8" 3/8" 60 68.5 Ø 25 23
Materials 6S4477. . .
Housing PP PVDF PFA
Ball (ball valve) PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw PP PVDF PTFE
O-ring* FPM FPM FPM
Ball (valve)** FPM FPM FPM
Pressure spring Hastelloy© Hastelloy© Hastelloy©
*EPDM, FFKM on request **PTFE on request
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 701
6 Ball Valves 6D with pneumatic actuator(STANDARD)
1. Housing made of glassfibre reinforced PP
2. Connection G 1/4" female thread
3. Control using neutral, gaseous media
4. Series 6L ball valve
5. Mounting using special mounting bracket
The Series 6D ball valves comprise Series 6L ball valves and our pneumatic part-turn actuator (STANDARD). The pneumaticpartturn actuator provides reliable ball valve operation. The piston drive is compact and maintenance-free and can be operatedwith all neutral, gaseous media. As standard the actuator has a spring-return.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 702
6 Ball valve (Series 6D) with pneumatic part-turnactuator (STANDARD), spring return, 2-way
Article-Nr Nominal Diameter Connection Material
6D701F0414PFFK DN04 G1/4" PFA/FFKM
6D701F0414PFFP DN04 G1/4" PFA/FPM
6D701F0414PPEP DN04 G1/4" PP/EPDM
6D701F0414PPFP DN04 G1/4" PP/FPM
6D701F0414PVEP DN04 G1/4" PVDF/EPDM
6D701F0414PVFK DN04 G1/4" PVDF/FFKM
6D701F0414PVFP DN04 G1/4" PVDF/FPM
6D801F0414PFFK DN04 NPT1/4" PFA/FFKM
6D801F0414PFFP DN04 NPT1/4" PFA/FPM
6D801F0414PPEP DN04 NPT1/4" PP/EPDM
6D801F0414PVFK DN04 NPT1/4" PVDF/FFKM
6D801F0414PVFP DN04 NPT1/4" PVDF/FPM
6D701F0614PFFK DN06 G1/4" PFA/FFKM
6D701F0614PFFP DN06 G1/4" PFA/FPM
6D701F0614PPFP DN06 G1/4" PP/FPM
6D701F0614PVFK DN06 G1/4" PVDF/FFKM
6D701F0614PVFP DN06 G1/4" PVDF/FPM
6D701F0812PFFK DN08 G1/2" PFA/FFKM
6D701F0812PFFP DN08 G1/2" PFA/FPM
6D701F0812PPEP DN08 G1/2" PP/EPDM
6D801F0812PFFK DN08 NPT1/2" PFA/FFKM
6D801F0812PFFP DN08 NPT1/2" PFA/FPM
6D801F0812PPFP DN08 NPT1/2" PP/FPM
6D801F0812PVFK DN08 NPT1/2" PVDF/FFKM
6D801F0812PVFK2 DN08 NPT1/2" PVDF/FFKM
6D801F0812PVFP DN08 NPT1/2" PVDF/FPM
6D701F1012PFEP DN10 G1/2" PFA/EPDM
6D701F1012PFFK DN10 G1/2" PFA/FFKM
6D701F1012PFFP DN10 G1/2" PFA/FPM
6D701F1012PPEP DN10 G1/2" PP/EPDM
6D701F1012PPFP DN10 G1/2" PP/FPM
6D701F1012PVFK DN10 G1/2" PVDF/FFKM
6D701F1012PVFP DN10 G1/2" PVDF/FPM
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 703
6 Ball valve (Series 6D) with pneumatic part-turnactuator (STANDARD), spring return, 2-way
Dimensions 6D. . .
G / NPT L L2 L3 L4 L5 L6 H h D1 D3 a d α
1/4" 65 32.5 ~ 45.5 8 3 34 ~ 120.5 ~ 25.5 Ø 20 Ø 70 Ø 60 4.5 18.5°
1/2" 100 50 ~ 45.5 10 4 34 ~ 145.5 ~ 32 Ø 30 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6D. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6D701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6D732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6D801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6D802. . . 0.58 m3/h ./. ./. ./.
6D832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6D844. . . 0.45 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 704
6 Ball valve (Series 6D) with pneumatic part-turnactuator (STANDARD), spring return, 3-way,vertical, with L-bore
Article-Nr Nominal Diameter Connection Material
6D702F0414PFFP DN04 G1/4" PFA/FPM
6D702F0414PVFK DN04 G1/4" PVDF/FFKM
6D702F0414PVFP DN04 G1/4" PVDF/FPM
6D802F0414PFFP DN04 NPT1/4" PFA/FPM
6D802F0414PVFP DN04 NPT1/4" PVDF/FPM
6D702F0614PVFP DN06 G1/4" PVDF/FPM
Dimensions 6D. . .
G / NPT L L2 L3 L4 L5 L6 H h D1 D3 a d α
1/4" 65 32.5 ~ 45.5 8 3 34 ~ 120.5 ~ 25.5 Ø 20 Ø 70 Ø 60 4.5 18.5°
1/2" 100 50 ~ 45.5 10 4 34 ~ 145.5 ~ 32 Ø 30 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6D. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6D701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6D732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6D801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6D802. . . 0.58 m3/h ./. ./. ./.
6D832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6D844. . . 0.45 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 705
6 Ball valve (Series 6D) with pneumatic part-turnactuator (STANDARD), spring return, 3-way,horizontal, with L-bore
Article-Nr Nominal Diameter Connection Material
6D732F0414PFEP DN04 G1/4" PFA/EPDM
6D732F0414PFFK DN04 G1/4" PFA/FFKM
6D732F0414PFFP DN04 G1/4" PFA/FPM
6D732F0414PPEP DN04 G1/4" PP/EPDM
6D732F0414PPFP DN04 G1/4" PP/FPM
6D732F0414PVFK DN04 G1/4" PVDF/FFKM
6D732F0414PVFP DN04 G1/4" PVDF/FPM
6D832F0414PFFK DN04 NPT1/4" PFA/FFKM
6D832F0414PFFP DN04 NPT1/4" PFA/FPM
6D832F0414PVFK DN04 NPT1/4" PVDF/FFKM
6D832F0414PVFP DN04 NPT1/4" PVDF/FPM
6D732F0614PFFK DN06 G1/4" PFA/FFKM
6D732F0614PFFP DN06 G1/4" PFA/FPM
6D732F0614PPEP DN06 G1/4" PP/EPDM
6D732F0614PPFP DN06 G1/4" PP/FPM
6D732F0614PVFK DN06 G1/4" PVDF/FFKM
6D732F0614PVFP DN06 G1/4" PVDF/FPM
6D732F0812PFFK DN08 G1/2" PFA/FFKM
6D832F0812PFFP DN08 NPT1/2" PFA/FPM
6D832F0812PVFP DN08 NPT1/2" PVDF/FPM
6D732F1012PFFK DN10 G1/2" PFA/FFKM
6D732F1012PFFP DN10 G1/2" PFA/FPM
6D732F1012PPEP DN10 G1/2" PP/EPDM
6D732F1012PPFP DN10 G1/2" PP/FPM
6D732F1012PVEP DN10 G1/2" PVDF/EPDM
6D732F1012PVFK DN10 G1/2" PVDF/FFKM
6D732F1012PVFP DN10 G1/2" PVDF/FPM
Dimensions 6D. . .
G / NPT L L2 L3 L4 L5 L6 H h D1 D3 a d α
1/4" 65 32.5 ~ 45.5 8 3 34 ~ 120.5 ~ 25.5 Ø 20 Ø 70 Ø 60 4.5 18.5°
1/2" 100 50 ~ 45.5 10 4 34 ~ 145.5 ~ 32 Ø 30 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6D. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6D701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6D732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6D801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6D802. . . 0.58 m3/h ./. ./. ./.
6D832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6D844. . . 0.45 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 706
6 Ball valve (Series 6D) with pneumatic part-turnactuator (STANDARD), spring return, 3-way,horizontal, with T-bore
Article-Nr Nominal Diameter Connection Material
6D733F0414PVFP DN04 G1/4" PVDF/FPM
6D833F0414PVFP DN04 NPT1/4" PVDF/FPM
6D733F0614PPFP DN06 G1/4" PP/FPM
6D733F0614PVFP DN06 G1/4" PVDF/FPM
6D733F1012PFFK DN10 G1/2" PFA/FFKM
6D733F1012PFFP DN10 G1/2" PFA/FPM
6D733F1012PPFP DN10 G1/2" PP/FPM
6D733F1012PVFP DN10 G1/2" PVDF/FPM
Dimensions 6D. . .
G / NPT L L2 L3 L4 L5 L6 H h D1 D3 a d α
1/4" 65 32.5 ~ 45.5 8 3 34 ~ 120.5 ~ 25.5 Ø 20 Ø 70 Ø 60 4.5 18.5°
1/2" 100 50 ~ 45.5 10 4 34 ~ 145.5 ~ 32 Ø 30 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6D. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6D701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6D732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6D801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6D802. . . 0.58 m3/h ./. ./. ./.
6D832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6D844. . . 0.45 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 707
6 Ball valve (Series 6D) with pneumatic part-turnactuator (STANDARD), spring return, 4-way, withdouble L-bore
Article-Nr Nominal Diameter Connection Material
6D744F0414PFFK DN04 G1/4" PFA/FFKM
6D744F0414PFFP DN04 G1/4" PFA/FPM
6D844F0414PFFP DN04 NPT1/4" PFA/FPM
6D744F0612PFFK DN06 G1/2" PFA/FFKM
6D744F0612PFFP DN06 G1/2" PFA/FPM
6D744F0612PVFP DN06 G1/2" PVDF/FPM
Dimensions 6D. . .
G / NPT L L2 L3 L4 L5 L6 H h D1 D3 a d α
1/4" 65 32.5 ~ 45.5 8 3 34 ~ 120.5 ~ 25.5 Ø 20 Ø 70 Ø 60 4.5 18.5°
1/2" 100 50 ~ 45.5 10 4 34 ~ 145.5 ~ 32 Ø 30 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6D. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6D701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6D732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6D741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6D744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6D801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6D802. . . 0.58 m3/h ./. ./. ./.
6D832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6D841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6D844. . . 0.45 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 708
6 Ball Valves 6G with electrical actuator(STANDARD)
1. Housing made of impact-resistant PP
2. Wear-free and inductive proximity switch as position indicator⇒Suitable for long-term applications⇒Reproducible settings
3. DC micromotor with planetary gear⇒Safe and reliable⇒Short switching time
4. Mounting using special mounting bracket
The Series 6G ball valves comprise Series 6L ball valves and our electrical part-turn actuator (STANDARD). The electricalpart-turn actuator provides optimal operation of the ball valve. A high quality DC motor guarantees safety and reliability in theapplication. A wear-free, inductive proximity switch indicates the position of the ball.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 709
6 Ball valve (Series 6G) with electrical actuator(STANDARD), 2-way
Article-Nr Nominal Diameter Connection Material
6G701F0414PFFK DN04 G1/4" PFA/FFKM
6G701F0414PVFP DN04 G1/4" PVDF/FPM
6G701F1012PFFK DN10 G1/2" PFA/FFKM
6G701F1012PFFP DN10 G1/2" PFA/FPM
6G701F1012PPFP DN10 G1/2" PP/FPM
6G701F1012PVFP DN10 G1/2" PVDF/FPM
Dimensions 6G. . .
G / NPT L L2 L4 L5 H h D D1 D2 D3 a d α
1/4" 65 32.5 8 3 ~ 172.5 ~ 25.5 Ø 60 Ø 20 Ø 92 Ø 70 Ø 60 4.5 18.5°
1/2" 100 - 10 4 ~ 197.5 ~ 32 Ø 60 Ø 30 Ø 92 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6G. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6G701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6G750. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6G802. . . 0.58 m3/h ./. ./. ./.
6G832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6G844. . . 0.45 m3/h ./. ./. ./.
6G850. . . 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 710
6 Ball valve (Series 6G) with electrical actuator(STANDARD), 3-way, vertical, with L-bore
Article-Nr Nominal Diameter Connection Material
6G702F0414PFFP DN04 G1/4" PFA/FPM
6G802F0414PFFP DN04 NPT1/4" PFA/FPM
6G702F0614PFEP DN06 G1/4" PFA/EPDM
Dimensions 6G. . .
G / NPT L L2 L4 L5 H h D D1 D2 D3 a d α
1/4" 65 32.5 8 3 ~ 172.5 ~ 25.5 Ø 60 Ø 20 Ø 92 Ø 70 Ø 60 4.5 18.5°
1/2" 100 - 10 4 ~ 197.5 ~ 32 Ø 60 Ø 30 Ø 92 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6G. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6G701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6G750. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6G802. . . 0.58 m3/h ./. ./. ./.
6G832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6G844. . . 0.45 m3/h ./. ./. ./.
6G850. . . 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 711
6 Ball valve (Series 6G) with electrical actuator(STANDARD), 3-way, horizontal, with L-bore
Article-Nr Nominal Diameter Connection Material
6G732F0414PFEP DN04 G1/4" PFA/EPDM
6G732F0414PFFK DN04 G1/4" PFA/FFKM
6G732F0414PFFP DN04 G1/4" PFA/FPM
6G732F0414PPFP DN04 G1/4" PP/FPM
6G732F0414PVFP DN04 G1/4" PVDF/FPM
6G732F0614PFFK DN06 G1/4" PFA/FFKM
6G732F0614PFFP DN06 G1/4" PFA/FPM
6G732F0614PVFK DN06 G1/4" PVDF/FFKM
6G732F1012PFFP DN10 G1/2" PFA/FPM
6G732F1012PPFK DN10 G1/2" PP/FFKM
6G732F1012PPFP DN10 G1/2" PP/FPM
Dimensions 6G. . .
G / NPT L L2 L4 L5 H h D D1 D2 D3 a d α
1/4" 65 32.5 8 3 ~ 172.5 ~ 25.5 Ø 60 Ø 20 Ø 92 Ø 70 Ø 60 4.5 18.5°
1/2" 100 - 10 4 ~ 197.5 ~ 32 Ø 60 Ø 30 Ø 92 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6G. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6G701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6G750. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6G802. . . 0.58 m3/h ./. ./. ./.
6G832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6G844. . . 0.45 m3/h ./. ./. ./.
6G850. . . 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 712
6 Ball valve (Series 6G) with electrical actuator(STANDARD), 3-way, horizontal, with T-bore
Article-Nr Nominal Diameter Connection Material
6G733F1012PVFP DN10 G1/2" PVDF/FPM
Dimensions 6G. . .
G / NPT L L2 L4 L5 H h D D1 D2 D3 a d α
1/4" 65 32.5 8 3 ~ 172.5 ~ 25.5 Ø 60 Ø 20 Ø 92 Ø 70 Ø 60 4.5 18.5°
1/2" 100 - 10 4 ~ 197.5 ~ 32 Ø 60 Ø 30 Ø 92 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6G. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6G701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6G750. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6G802. . . 0.58 m3/h ./. ./. ./.
6G832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6G844. . . 0.45 m3/h ./. ./. ./.
6G850. . . 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 713
6 Ball valve (Series 6G) with electrical actuator(STANDARD), 4-way, with double L-bore
Article-Nr Nominal Diameter Connection Material
6G744F0414PFFP DN04 G1/4" PFA/FPM
6G744F0414PPFP DN04 G1/4" PP/FPM
6G744F0612PPFP DN06 G1/2" PP/FPM
6G744F0612PVFP DN06 G1/2" PVDF/FPM
Dimensions 6G. . .
G / NPT L L2 L4 L5 H h D D1 D2 D3 a d α
1/4" 65 32.5 8 3 ~ 172.5 ~ 25.5 Ø 60 Ø 20 Ø 92 Ø 70 Ø 60 4.5 18.5°
1/2" 100 - 10 4 ~ 197.5 ~ 32 Ø 60 Ø 30 Ø 92 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6G. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6G701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6G750. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6G802. . . 0.58 m3/h ./. ./. ./.
6G832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6G844. . . 0.45 m3/h ./. ./. ./.
6G850. . . 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 714
6 Ball valve (Series 6G) with electrical actuator(STANDARD), 5-way, with L-bore
Article-Nr Nominal Diameter Connection Material
6G750F0414PFFK DN04 G1/4" PFA/FFKM
6G750F0414PFFP DN04 G1/4" PFA/FPM
6G750F0414PPFP DN04 G1/4" PP/FPM
6G750F0614PVFP DN06 G1/4" PVDF/FPM
Dimensions 6G. . .
G / NPT L L2 L4 L5 H h D D1 D2 D3 a d α
1/4" 65 32.5 8 3 ~ 172.5 ~ 25.5 Ø 60 Ø 20 Ø 92 Ø 70 Ø 60 4.5 18.5°
1/2" 100 - 10 4 ~ 197.5 ~ 32 Ø 60 Ø 30 Ø 92 Ø 96 Ø 83 5.5 25°
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6G. . .
Kvs-value DN 04 DN 06 DN 08 DN 10
6G701. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G702. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G732. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G733. . . 0.58 m3/h 0.85 m3/h ./. 3.7 m3/h
6G741. . . 0.61 m3/h 0.9 m3/h ./. 3.9 m3/h
6G744. . . 0.45 m3/h 0.65 m3/h ./. ./.
6G750. . . 0.58 m3/h 0.85 m3/h ./. ./.
6G801. . . 0.61 m3/h ./. 1.9 m3/h ./.
6G802. . . 0.58 m3/h ./. ./. ./.
6G832. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G833. . . 0.58 m3/h ./. 1.6 m3/h ./.
6G841. . . 0.61 m3/h ./. 1.6 m3/h ./.
6G844. . . 0.45 m3/h ./. ./. ./.
6G850. . . 0.58 m3/h ./. ./. ./.
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 715
6 Ball Valves 6R with electrical actuator(COMPACT)
1. DC micro-motor with planetary gear⇒safe and reliable⇒short switching times without overheating
2. Wear-free hall effect sensors as position indicator⇒suitable for long-term applications⇒reproducible settings⇒very lowcurrent consumption
3. Directly connectable to a PLC (programmable logic controler) or PCS (process control system)
4. Wide variety of mounting options⇒boreholes integrated into the flange plate for direct fastening onto consoles⇒pipe clips forside fastening on a wall board⇒fastening clamps for vertical fastening on a base plate or for wall surface mounting
5. Motor housing made of impact-resistant PP⇒high media and corrosion resistance⇒even applicable to aggressive ambientatmosphere
6. Seamless female G- or NPT-thread in accordance with DIN, USAS or JIS⇒numerous connection options
The ball valves of series 6R, with considerably reduced dimensions are the ideal solution for space-saving mounting. Theycomprise a Series 6L ball valve and a compact electrical part-turn actuator. Our series 6R ball valves are designed for long-termuse. Especially for this application the drive is designed with new hall technology.
The high-quality DC motor with planetary gear ensures optimum control with short switching times without overheating. This isbecause wear-free hall effect sensors are acting as a position indicator and are forwarding the position of the ball directly to aprocessor board. The ball valve is controlled by a BCD signal. A port is available to connect a Programmable Logic Controller(PLC) or Process Control System (PCS).
The motor housing made of impact-resistant PP ensures a high level of resistance to corrosion. Because of this, series 6R ballvalves, which are available as 2-, 3-, 4- and 5-way ball valves, are also excellently suited for long-term use in aggressiveenvironments. Different versions of accessories are available to ensure reliable and easy mounting. Variable connection methods:The Series 6R ball valves are supplied as standard with seam-less female threads. The emtechnik module system provides a widevariety of matching fastening and connection elements for flexible tubes and pipes, fittings, couplings or adapters.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 716
6 Ball valve (Series 6R), with electrical actuator(COMPACT), 2-way
Article-Nr Nominal Diameter Connection Material
6R701F0414PPFP DN04 G1/4" PP/FPM
6R701F0414PVFP DN04 G1/4" PVDF/FPM
6R801F0414PVFP DN04 NPT1/4" PVDF/FPM
6R701F0614PFFK DN06 G1/4" PFA/FFKM
6R701F0614PFFP DN06 G1/4" PFA/FPM
Dimensions 6R701F. . .
G D D1 L L1 L2 B H
1/4" Ø20 Ø53 65 52 16 32 ~122
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical Data 6R. . .
Kvs-value DN 04
6R701. . . 0.61 m3/h
6R732. . . 0.58 m3/h
6R744. . . 0.45 m3/h
6R750. . . 0.58 m3/h
6R801. . . 0.61 m3/h
6R832. . . 0.58 m3/h
6R844. . . 0.45 m3/h
6R850. . . 0.58 m3/h
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
Electrical Drive 6E502
Max. ambient temperature 70°C
Voltage 24 VDC
Power consumption 180 mA
Torque 5.5 Nm
Protection class to EN 60529 IP 65
Connection 8-pole plug
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 717
6 Ball valve (Series 6R), with electrical actuator(COMPACT), 3-way, horizontal, with L-bore
Article-Nr Nominal Diameter Connection Material
6R732F0414PFFP DN04 G1/4" PFA/FPM
6R732F0414PVFP DN04 G1/4" PVDF/FPM
6R832F0414PVFP DN04 NPT1/4" PVDF/FPM
Dimensions 6R732F. . .
G D D1 L L1 L2 B H
1/4" Ø20 Ø53 65 52 16 48.5 ~122
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical Data 6R. . .
Kvs-value DN 04
6R701. . . 0.61 m3/h
6R732. . . 0.58 m3/h
6R744. . . 0.45 m3/h
6R750. . . 0.58 m3/h
6R801. . . 0.61 m3/h
6R832. . . 0.58 m3/h
6R844. . . 0.45 m3/h
6R850. . . 0.58 m3/h
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
Electrical Drive 6E502
Max. ambient temperature 70°C
Voltage 24 VDC
Power consumption 180 mA
Torque 5.5 Nm
Protection class to EN 60529 IP 65
Connection 8-pole plug
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 718
6 Ball valve 6R wit electrical actuator (COMPACT),4-way with double-L-bore
Article-Nr Nominal Diameter Connection Material
6R844F0414PPFP DN04 NPT1/4" PP/FPM
Dimensions 6R744F. . .
G D D1 L L1 L2 H
1/4" Ø20 Ø53 65 52 16 ~122
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical Data 6R. . .
Kvs-value DN 04
6R701. . . 0.61 m3/h
6R732. . . 0.58 m3/h
6R744. . . 0.45 m3/h
6R750. . . 0.58 m3/h
6R801. . . 0.61 m3/h
6R832. . . 0.58 m3/h
6R844. . . 0.45 m3/h
6R850. . . 0.58 m3/h
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
Electrical Drive 6E502
Max. ambient temperature 70°C
Voltage 24 VDC
Power consumption 180 mA
Torque 5.5 Nm
Protection class to EN 60529 IP 65
Connection 8-pole plug
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 719
6 Ball valve (Series 6R), with electrical actuator(COMPACT), 5-way, with L-bore
Article-Nr Nominal Diameter Material
6R750F0414PPFP DN04 PP/FPM
6R750F0414PVFP DN04 PVDF/FPM
6R850F0414PVFP DN04 PVDF/FPM
6R750F0614PPFP DN06 PP/FPM
6R750F0614PVFP DN06 PVDF/FPM
Dimensions 6R750F. . .
G D D1 L L1 L2 H
1/4" Ø20 Ø53 65 52 32.5 ~122
Materials 6L. . ., 6D. . ., 6G. . ., 6R. . .
Housing PP PVDF PFA
Ball PP PVDF PTFE
Sealing sleeve PTFE PTFE PTFE
Pressure screw** PP PVDF PTFE
O-ring* FPM FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical Data 6R. . .
Kvs-value DN 04
6R701. . . 0.61 m3/h
6R732. . . 0.58 m3/h
6R744. . . 0.45 m3/h
6R750. . . 0.58 m3/h
6R801. . . 0.61 m3/h
6R832. . . 0.58 m3/h
6R844. . . 0.45 m3/h
6R850. . . 0.58 m3/h
PP PVDF PFA
Max. media temperature* 90°C 120°C 180°C
Pressure stage PN 10 PN 10 PN 10
Electrical Drive 6E502
Max. ambient temperature 70°C
Voltage 24 VDC
Power consumption 180 mA
Torque 5.5 Nm
Protection class to EN 60529 IP 65
Connection 8-pole plug
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 720
6 Balls valves 6A 7- to 11-way
1. Ball and stem made in one piece
2. Stem sealing with O-ring
3. Housing made of PVDF and PTFE⇒Very high media resistance
4. Sealing sleeves made of PTFE⇒Max. media resistance
5. Female G-thread seamless in accordance with DIN⇒Numerous connection options
The Series 6A ball valves have been in our product range for years. Today they are predominantly in demand in PTFE. Designs inPVDF are also possible as standard. The Series 6A ball valves are available in various nominal diameters and numerous versions.A special advantage for the user: with the 7, 9 or 11-way ball valve designs even demanding tasks can be reliably and safelyaddressed.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 721
6 Ball valve (Series 6A), manual, 11-way, withL-bore, in block form
Article-Nr Nominal Diameter Connection Material
6A711F0414PPFP DN04 G1/4" PP/FPM
Dimensions 6A. . .
G L L1 L5 B h H H1 a d d1 D1
6A770F. . . G 1/4" 98 25 - Ø 32 24 ~78 58.5 - - - 60
6A790F. . . G 1/4" Ø 120 25 7 Ø 32 60 ~ 117 70 95 6.5 12 -
6A711F. . . G 1/4" Ø 120 25 7 Ø 32 60 ~ 117 70 95 6.5 12 -
Materials 6A. . .
Housing PVDF PTFE
Ball PVDF PTFE
Sealing sleeve PTFE PTFE
Pressure screw PVDF PTFE
O-ring* FPM FPM
* EPDM, FFKM on request
Technical data 6A. . .
Kvs-value DN 04
6A770. . . 0.58 m3/h
6A790. . . 0.58 m3/h
6A711. . . 0.58 m3/h
PVDF PTFE
Max. media temperature* 120°C 150°C
Pressure stage PN 10 PN 6
* Starting from the nominal pressure rating (20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 722
6 Ball valve (Series 6A), manual, 7-way, withL-bore, in block form
Article-Nr Nominal Diameter Connection Material
6A770F0414PTFP DN04 G1/4" PTFE/FPM
6A770F0414PVFP DN04 G1/4" PVDF/FPM
Dimensions 6A. . .
G L L1 L5 B h H H1 a d d1 D1
6A770F. . . G 1/4" 98 25 - Ø 32 24 ~78 58.5 - - - 60
6A790F. . . G 1/4" Ø 120 25 7 Ø 32 60 ~ 117 70 95 6.5 12 -
6A711F. . . G 1/4" Ø 120 25 7 Ø 32 60 ~ 117 70 95 6.5 12 -
Materials 6A. . .
Housing PVDF PTFE
Ball PVDF PTFE
Sealing sleeve PTFE PTFE
Pressure screw PVDF PTFE
O-ring* FPM FPM
* EPDM, FFKM on request
Technical data 6A. . .
Kvs-value DN 04
6A770. . . 0.58 m3/h
6A790. . . 0.58 m3/h
6A711. . . 0.58 m3/h
PVDF PTFE
Max. media temperature* 120°C 150°C
Pressure stage PN 10 PN 6
* Starting from the nominal pressure rating (20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 723
6 Ball Valves 6E with electrical actuator(STANDARD), 7- to 11-way
1. Housing made of impact-resistant PP
2. Wear-free and inductive proximity switch as position indicator⇒Suitable for long-term applications⇒Reproducible settings
3. DC micromotor with planetary gear⇒Safe and reliable⇒Short switching time
4. Series 6A ball valve Multiway designs⇒7 to 11-way
5.
The Series 6E ball valves comprise Series 6A ball valves and our electrical part-turn actuator (STANDARD). The electricalpart-turn actuator provides optimal operation of the ball valve. A high quality DC motor guarantees safety and reliability in theapplication. A wear-free, inductive proximity switch indicates the position of the ball. Beginning with the 7-way ball valve, actuatorand ball valve are individually configured and matched.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 724
6 Ball valve (Series 6E), with electrical actuator(STANDARD), 11-way, with L-bore, in block form
Article-Nr Nominal Diameter Connection Material
6E711F0414PTFK DN04 G1/4" PTFE/FFKM
Dimensions 6E. . .
G L L1 h H H1 B D D2 D3 a d d1
6E770F. . . G 1/4" 98 25 49 ~ 235.5 58.5 Ø 32 Ø 60 Ø 112 - - - -
6E790F. . . G 1/4" Ø 120 25 60 ~ 248 70 Ø 32 Ø 60 Ø 112 - Ø 135 Ø 6.5 Ø 12
6E711F. . . G 1/4" Ø 120 24 60 ~ 233 71 Ø 32 Ø 60 Ø 112 Ø 150 Ø 135 Ø 6.5 -
Materials 6E. . ., 6X. . ., 6Y. . ., 6Z. . .
Housing PVDF PTFE
Ball PVDF PTFE
Sealing sleeve PTFE PTFE
Pressure screw** PVDF PTFE
O-ring* FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6E. . .
Kvs-value DN 04
6E770. . . 0.58 m3/h
6E790. . . 0.58 m3/h
PVDF PTFE
Max. media temperature* 120°C 150°C
Pressure stage PN 10 PN 6
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 725
6 Ball valve (Series 6E), with electrical actuator(STANDARD), 7-way, with L-bore, in block form
Article-Nr Nominal Diameter Connection Material
6E770F0414PTFK DN04 G1/4" PTFE/FFKM
6E770F0414PVFP DN04 G1/4" PVDF/FPM
Dimensions 6E. . .
G L L1 h H H1 B D D2 D3 a d d1
6E770F. . . G 1/4" 98 25 49 ~ 235.5 58.5 Ø 32 Ø 60 Ø 112 - - - -
6E790F. . . G 1/4" Ø 120 25 60 ~ 248 70 Ø 32 Ø 60 Ø 112 - Ø 135 Ø 6.5 Ø 12
6E711F. . . G 1/4" Ø 120 24 60 ~ 233 71 Ø 32 Ø 60 Ø 112 Ø 150 Ø 135 Ø 6.5 -
Materials 6E. . ., 6X. . ., 6Y. . ., 6Z. . .
Housing PVDF PTFE
Ball PVDF PTFE
Sealing sleeve PTFE PTFE
Pressure screw** PVDF PTFE
O-ring* FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6E. . .
Kvs-value DN 04
6E770. . . 0.58 m3/h
6E790. . . 0.58 m3/h
PVDF PTFE
Max. media temperature* 120°C 150°C
Pressure stage PN 10 PN 6
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 726
6 Multiport Ball Valves 6X with pneumatic actuator(STANDARD)
1. Common shaft⇒Synchronous switching of the media flow
2. Fixed assignment of the two media flows⇒Unintentional mixing not possible
3. Low maintenance
4. Low cost, as only one fitting is required
5. Compact shape. Advantageous in machinery engineering
The Series 6X multiport ball valves with pneumatic part-turn actuator comprise two multi-way ball valves that are arranged one ontop of the other in a housing with 2 levels. There is no flow connection between the individual levels. With one switching processboth media flows are synchronously distributed or collected using a common shaft. Unintentional mixing of the media flows is notpossible. The multiport ball valve has a crucial safety advantage in practice. The materials available, PVDF and PTFE, provide highmedia resistance and ensure a wide range of applications. The Series 6Z multiport ball valves are also available with pneumatic orelectrical part-turn actuator. One drive is sufficient for each multiport ball valve. A further important advantage: The use of multiportball valves provides a significant cost-saving in machinery engineering, as only one fitting is needed due to the special principle ofoperation.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 727
6 Multiport ball valve (Series 6X) with pneumaticpart-turn actuator, 2-way
Article-Nr Nominal Diameter Connection Material
6X701F0414PTFP DN04 G1/4" PTFE
6X701F0414PVFP DN04 G1/4" PVDF
6X701F1012PTFP DN10 G1/2" PTFE
6X701F1012PVFP DN10 G1/2" PVDF
Dimensions 6X. . .
G L L3 L6 H H1 h h1
G 1/4" Ø 80 ~ 74 34 ~ 126 65 20 25
G 1/2" Ø 120 ~ 88.5 67.5 ~ 196 100 30 40
Materials 6E. . ., 6X. . ., 6Y. . ., 6Z. . .
Housing PVDF PTFE
Ball PVDF PTFE
Sealing sleeve PTFE PTFE
Pressure screw** PVDF PTFE
O-ring* FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6X. . .
Kvs-value DN 04 DN 10
6X701. . . 0.61 m3/h 3.9 m3/h
6X732. . . 0.58 m3/h 3.7 m3/h
PVDF PTFE
Max. media temperature* 120°C 150°C
Pressure stage PN 10 PN 6
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 728
6 Multiport Ball Valves 6Y with electrical actuator(STANDARD)
1. DC micromotor with planetary gear⇒safe and reliable⇒short switching time
2. Common shaft⇒Synchronous switching of the media flow
3. Fixed assignment of the two media flows⇒Unintentional mixing not possible
4. Low maintenance
5. Low cost, as only one fitting is required
6. Compact shape. Advantageous in machinery engineering
The Series 6Y multiport ball valves with electrical actuator (STANDARD) comprise two multi-way ball valves that are arranged oneon top of the other in a housing with 2 levels. There is no flow connection between the individual levels. With one switching processboth media flows are synchronously distributed or collected using a common shaft. Unintentional mixing of the media flows is notpossible. The multiport ball valve has a crucial safety advantage in practice. The materials available, PVDF and PTFE, provide highmedia resistance and ensure a wide range of applications. One drive is sufficient for each multiport ball valve. A further importantadvantage: The use of multiport ball valves provides a significant cost-saving in machinery engineering, as only one fitting isneeded due to the special principle of operation.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 729
6 2-way multiport ball valve with electricalpart-turn actuator STANDARD
Article-Nr Nominal Diameter Connection Material
6Y701F0414PTFP DN04 G1/4" PTFE
6Y701F0414PVFP DN04 G1/4" PVDF
6Y701F1012PTFP DN10 G1/2" PTFE
6Y701F1012PVFP DN10 G1/2" PVDF
Dimensions 6Y. . .
G L L1 B D D2 h h1 h2 H H1
6Y701F. . . G 1/4" Ø 80 - - Ø 60 Ø 92 20 25 - 181 65
6Y701F. . . G 1/2" Ø 120 - - Ø 60 Ø 112 30 40 - 201 100
6Y732F. . . G 1/4" Ø 80 - - Ø 60 Ø 92 20 25 - 181 65
6Y732F. . . G 1/2" Ø 120 - - Ø 60 Ø 112 30 40 - 201 100
6Y750F. . . G 1/4" Ø 80 15 Ø 22 Ø 60 Ø 92 25 47 45.5 175 90
6Y750F. . . G 1/2" Ø 120 25 Ø 40.5 Ø 60 Ø 112 40 60 60 201 160
6Y770F. . . G 1/4" Ø 100 25 Ø 25 Ø 60 Ø 112 25 50 49 201 109
6Y770F. . . G 1/2" Ø 140 30 Ø 40.5 Ø 60 Ø 112 40 60 60 201 160
Materials 6E. . ., 6X. . ., 6Y. . ., 6Z. . .
Housing PVDF PTFE
Ball PVDF PTFE
Sealing sleeve PTFE PTFE
Pressure screw** PVDF PTFE
O-ring* FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6Y. . .
Kvs-value DN 04 DN 10
6Y701. . . 0.61 m3/h 3.9 m3/h
6Y732. . . 0.58 m3/h 3.7 m3/h
6Y750. . . 0.58 m3/h
6Y770. . . 0.58 m3/h 3.7 m3/h
6Y790. . . 0.58 m3/h ./.
PVDF PTFE
Max. media temperature* 120°C 150°C
Pressure stage PN 10 PN 6
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 730
6 Multiport Ball Valves 6Z, manual operated
1. Common shaft⇒Synchronous switching of the media flow
2. Fixed assignment of the two media flows⇒Unintentional mixing not possible
3. Low maintenance
4. Low cost, as only one fitting is required
5. Compact shape. Advantageous in machinery engineering
The Series 6Z multiport ball valves are manual operated and comprise two multi-way ball valves that are arranged one on top ofthe other in a housing with 2 levels. There is no flow connection between the individual levels. With one switching process bothmedia flows are synchronously distributed or collected using a common shaft. Unintentional mixing of the media flows is notpossible. The multiport ball valve has a crucial safety advantage in practice. The materials available, PVDF and PTFE, provide highmedia resistance and ensure a wide range of applications. The Series 6Z multiport ball valves are also available with pneumatic orelectrical part-turn actuator. One drive is sufficient for each multiport ball valve. A further important advantage: The use of multiportball valves provides a significant cost-saving in machinery engineering, as only one fitting is needed due to the special principle ofoperation.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 731
6 Multiport ball valve (Series 6Z), manual, 3-ways
Article-Nr Nominal Diameter Connection Material
6Z732F0414PTFK DN04 G1/4" PTFE/FFKM
6Z732F0614PVFP DN06 G1/4" PVDF/FPM
6Z732F1012PVFP DN10 G1/2" PVDF/FPM
Dimensions 6Z. . .
G L L1 B D1 h h1 h2 H H1
6Z701F. . ., 6Z732F. . . G 1/4" Ø 80 - 25 45 20 25 - 55 65
6Z701F. . ., 6Z732F. . . G 1/2" Ø 120 - 48 60 30 40 - 78 100
6Z744F. . . G 1/4" Ø 80 - - 45 20 25 - ~ 100 65
6Z750F. . . G 1/4" Ø 80 15 Ø 22 45 25 47 45.5 79.5 90
6Z750F. . . G 1/2" Ø 120 25 Ø 40.5 80 40 60 60 109 160
6Z770F. . . G 1/4" Ø 100 25 Ø 25 80 24 50 49 46.5 109
6Z770F. . . G 1/2" Ø 140 30 Ø 40.5 80 40 60 60 95 160
Materials 6E. . ., 6X. . ., 6Y. . ., 6Z. . .
Housing PVDF PTFE
Ball PVDF PTFE
Sealing sleeve PTFE PTFE
Pressure screw** PVDF PTFE
O-ring* FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6Z. . .
Kvs-value DN 04 DN 10
6Z701. . . 0.61 m3/h 3.9 m3/h
6Z732. . . 0.58 m3/h 3.7 m3/h
6Z750. . . 0.58 m3/h 3.7 m3/h
6Z770. . . 0.58 m3/h 3.7 m3/h
PVDF PTFE
Max. media temperature* 120°C 150°C
Pressure stage PN 10 PN 6
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 732
6 Multiport ball valve (Series 6Z), manual, 4-ways
Article-Nr Nominal Diameter Connection Material
6Z744F0414PPFP DN04 G1/4" PP/FPM
Dimensions 6Z. . .
G L L1 B D1 h h1 h2 H H1
6Z701F. . ., 6Z732F. . . G 1/4" Ø 80 - 25 45 20 25 - 55 65
6Z701F. . ., 6Z732F. . . G 1/2" Ø 120 - 48 60 30 40 - 78 100
6Z744F. . . G 1/4" Ø 80 - - 45 20 25 - ~ 100 65
6Z750F. . . G 1/4" Ø 80 15 Ø 22 45 25 47 45.5 79.5 90
6Z750F. . . G 1/2" Ø 120 25 Ø 40.5 80 40 60 60 109 160
6Z770F. . . G 1/4" Ø 100 25 Ø 25 80 24 50 49 46.5 109
6Z770F. . . G 1/2" Ø 140 30 Ø 40.5 80 40 60 60 95 160
Materials 6E. . ., 6X. . ., 6Y. . ., 6Z. . .
Housing PVDF PTFE
Ball PVDF PTFE
Sealing sleeve PTFE PTFE
Pressure screw** PVDF PTFE
O-ring* FPM FPM
* EPDM, FFKM on request ** only with G1/2" or NPT
Technical data 6Z. . .
Kvs-value DN 04 DN 10
6Z701. . . 0.61 m3/h 3.9 m3/h
6Z732. . . 0.58 m3/h 3.7 m3/h
6Z750. . . 0.58 m3/h 3.7 m3/h
6Z770. . . 0.58 m3/h 3.7 m3/h
PVDF PTFE
Max. media temperature* 120°C 150°C
Pressure stage PN 10 PN 6
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 733
6 Laboratory Valves 6M – extra small and compact
1. Connection G 1/8“⇒Small and compact
2. Plug valve principle
3. Housing made of PTFE⇒Very high media resistance
4. 2 and 3-way version
The Series 6M laboratory valves are designed using the plug valve principle. They are small and compact and available in threedifferent versions. Due to their small nominal diameter they are particularly suitable for use in the laboratory.
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 734
6 Laboratory valve (Series 6M), 2-way
Article-Nr Nominal Diameter Connection Material
6M201F0318PT DN03 G1/8" PTFE
Dimensions 6M. . .
G L L2 L5 l H B h a d d1
G 1/8" 44 18 2.2 32 ~ 25.5 20 10 24 3.5 6
Materials 6M. . .
Housing PTFE
Plug PTFE
Technical data 6M. . .
Kvs-value DN 03
6M201. . . 0.5 m3/h
6M302. . . 0.4 m3/h
6M303. . . 0.4 m3/h
PTFE
Max. media temperature* 150°C
Pressure stage PN 1
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 735
6 Laboratory valve (Series 6M), 3-way, with L-bore
Article-Nr Nominal Diameter Connection Material
6M302F0318PT DN03 G1/8" PTFE
Dimensions 6M. . .
G L L2 L5 l H B h a d d1
G 1/8" 44 18 2.2 32 ~ 25.5 20 10 24 3.5 6
Materials 6M. . .
Housing PTFE
Plug PTFE
Technical data 6M. . .
Kvs-value DN 03
6M201. . . 0.5 m3/h
6M302. . . 0.4 m3/h
6M303. . . 0.4 m3/h
PTFE
Max. media temperature* 150°C
Pressure stage PN 1
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 736
6 Laboratory valve (Series 6M), 3-way, with T-bore
Article-Nr Nominal Diameter Connection Material
6M303F0318PT DN03 G1/8" PTFE
Dimensions 6M. . .
G L L2 L5 l H B h a d d1
G 1/8" 44 18 2.2 32 ~ 25.5 20 10 24 3.5 6
Materials 6M. . .
Housing PTFE
Plug PTFE
Technical data 6M. . .
Kvs-value DN 03
6M201. . . 0.5 m3/h
6M302. . . 0.4 m3/h
6M303. . . 0.4 m3/h
PTFE
Max. media temperature* 150°C
Pressure stage PN 1
* Starting from the nominal pressure rating (at 20°C), the permissible pressure reduceswith increasing temperature!
Tel +49.6237.4070 Fax +49.6237.1628 www.em-technik.com Version 2/2014 Page 737