Date post: | 06-Feb-2018 |
Category: |
Documents |
Upload: | truongmien |
View: | 249 times |
Download: | 6 times |
BANDO
Power transmission belts selectorwe transmit power across space
REVISED 9
T-T003006-E
�
Since Bando's inception in 1906, we have pursued aggressive development policies in the power transmission belts and systems fields. Our highly capable staff develops power transmission belts as well as power transmission systems to meet the unique requirements of various types of equipment and engines. Their work contributes greatly to the emerging miniaturization technology responsible for making machines precise, smaller, lighter and more efficient.
Global Network
In 1969, BANDO established overseas liaison offices in America and Europe. In the 1980’s
we began strengthening our globalization efforts in Asia. Now, in �1st century, we have grown
into a company with more than 10 sales and/or manufacturing facilities around the world. The
collaboration of these companies forms the foundation of our global network meeting the wider
needs of automobile manufactures and office automation appliance manufactures in response to
their overseas expansion.
More importantly appliance, we will not only focus its efforts on establishing overseas facilities,
but also on training employees who can actively participate in these overseas activities, training
local associates and contributing to communities abroad.
�
Contents
PageBANDO Power Transmission Belts Table (Industrial / Automotive) ··································································4~5Selection Table for BANDO Power Transmission Belts ····················································································6~9
=SYNCHRONOUS BELTS=King Power Synchronous Belts (KPS �) ···········································································································10High Performance STS Belts (HP-STS) ············································································································11Long Synchronous / STS Belts (LSB-R)············································································································1�Bancollan Long Synchronous / STS Belts (LSB-U) ···························································································1�Synchronous Belts·······································································································································14~15Super Torque Synchronous Belts (STS) ······································································································16~17Bancollan Double Sided Synchronous / STS Belts ···························································································18Double Sided Synchronous / STS Belts ············································································································19HTS Belts ··························································································································································�0Bancollan Synchronous / STS Belts ············································································································�1~��Bancollan Synchronous Belts TN-type ··············································································································��
=V BELTS=Fractional H.P. V Belts (FHP) AND MULTIPLE V BELTS ·············································································�4~�5AGRICULTURAL V BELTS RED S � ···············································································································�6AGRICULTURAL V BELTS W800 ······················································································································�7Double V Belts ···················································································································································�8Power Ace ···················································································································································�9~�0Narrow V Belts SP-type ·····································································································································�1Variable Speed Belts ·········································································································································��Bancollan V Belts (VC Type) ······························································································································��Bancollan V Belts (DC Type)······························································································································��Banflex ·······························································································································································�4Bancord V Belts ·················································································································································41
=BANDED BELTS=Power Scrum ···············································································································································�6~�7Banflex Scrum ···················································································································································�5
=V RIBBED BELTS=PolyBanrope ······················································································································································�8Bancollan PolyBanrope ·····································································································································�9
=ROUND BELTS=Bancollan Round Belts (Seamless type) ···········································································································40Bancord Round Belts (Openend type)···············································································································41
=FLAT BELTS=Bancollan Cordless Flat Belts (Seamless type)·································································································41PS Belts ·······················································································································································4�~4�
=AUTOMOTIVE POWER TRANSMISSION BELTS=Wrapped Type ··············································································································································44~45RAF (Raw Edge / Laminated Type) ·············································································································44~45RPF (Raw Edge / Cogged Type) ·················································································································44~45Rib Ace ························································································································································44~45OHC Syncronous / STS Belts······················································································································44~45
Example of Application ··································································································································47~50Trouble Shooting ············································································································································51~60Belt Design Factors ·············································································································································61
This content might change without consent. Please ackowledge it. The numerical value is not a guarantee value.
4
《SYNCHRONOUS BELTS》
Description Material BeltProfile Page
King Power Synchronous Belts
(KPS �)P 10
High Performance STS Belts (HP-
STS)R 11
Long Synchronous / STS Belts
R 1�
Bancollan Long Synchronous /
STS BeltsP 1�
Synchronous Belts R 14~15
Super Torque Synchronous Belts
R 16~17
Double Sided Synchronous /
STS BeltsR 18
Bancollan Double Sided Synchronous
/ STS BeltsP 19
HTS Belts R �0
Bancollan Synchronous /
STS BeltsP �1~��
�Material: R=Rubber, P=Polyurethane
《V BELTS》
Description Material BeltProfile Page
Fractional H.P. V Belts (FHP) AND
MULTIPLE V BELTS
R �4~�5
AGRICULTURAL V BELTS RED S �
R �6
AGRICUL TURAL V BELTS W800
R �7
Double V Belts R �8
Power Ace R �9~�0
Narrow V Belts SP-type
R �1
Variable Speed Belts
R ��
Bancollan V Belts (VC Type)
P ��
Bancollan V Belts (DC Type)
P ��
Banflex P �4
Bancord V Belts P 41
BANDOPowerTransmissionBeltsTable
5
BANDOPowerTransmissionBeltsTable《BANDED BELTS》
Description Material BeltProfile Page
Power Scrum (V Belt Type)
R �6~�7
Power Scrum (Power Ace Type)
R �6~�7
Banflex Scrum P �5
《V RBBED BELTS》
Description Material BeltProfile Page
Poly Banrope R �8
Bancollan Poly Banrope
P �9
《ROUND BELTS》
Description Material BeltProfile Page
Bancollan Round Belts
(Seamless Type)P 40
Bancord Round Belts
(Openend Type)P 41
《FALT BELTS》
Description Material BeltProfile Page
Bancollan Cordless Flat Belts
(Seamless type)P 41
PS Belts R / P 4�~4�
《ATUOMAOTIVE POWER TRANSMISSION BELTS》
Description Material BeltProfile Page
(Wrapped Type) R 44~45
RAF (Laminated Type)
R 44~45
RPF (Cogged Type)
R 44~45
Rib Ace R 44~45
OHC Synchronous / STS
BeltsR 44~45
6
SelectionTableforBandoPowerTransmissionBeltsFind the Belt type you need in the first column. Then, reading across the page, find the belt that matches your Kilowatt, speed, elongation and/or center-to-center requirements.
TYPE OF BELTMaximum Kilowatt (KW) Maximum Speed (m/sec) Maximum
elongation ※1 (%)
Maximum Recommerdeo center distance (mm)
UNDER0.75
0.75~7.5 7.5~75OVER
75UNDER
�0�0~�0
OVER�0
UNDER500
500~ �000
OVER�000
Rubber belts
Fractional H.P. [�L] [4L] [5L][�L]15
[4L 5L]�0
1.5~�.0
V Belts
Multiple [A][B][C]
[D][E]
[A~E]�0
1.5~�.0 [A~E]
Red-s � [SA][SB][SC]
�0 1.5~�.0
Double-V [AA][BB][CC]
�0 1.5~�.0 [AA][BB][CC]
Narrow V Belts [�V][5V][8V]
40Under
1.0[�V] [5V, 8V]
Power Scrum (Banded Belts)
Narrow V type [�V][5V][8V]
40Under
1.0[�V] [5V, 8V]
Multiple V type [A][B][C]
[E][A~E]
�01.5~�.0 [A~E]
Variable Speed Belts [VA~VE] �0 1.0~1.5 [VA, VB] [VC,VD,VE]
RIB-ACE [PK][PK]50
1.0~1.5
V Ribbed Belts [J] [L] [M][J, L, M]
�01.5~�.0
Synchronous Belts[MXL][XL]
[L][H]
[XH][XXH] 50
Under0.15
STS[S4.5M][S5M]
[S8M] [S14M] 60Under0.15
Long Synchronous Belt (LSB-R) 10Under0.15
Polyurethane BeltsKing Power Synchronous Belt (KPS)
[S8M] [S14M] �0Under
0.1
Polyurethane V-Belts
FHP (�L) [�L] [�L] 1.5~�.0
Cogged V Belts (VC)
[J][J] 10
1.5~�.0
Double cogged V Belts (DC)
[J] 0.5~�.0
Cordless (Bancolan V Belts)
0.5~1.0
Open Ended (Bandcord V Belts)
[M] [A][B] �.0~�.0
Banflex [�M] [5M] [7M] [11M] 60Under
0.8
Banded Banflex [5MS] [7MS] [11MS] 60Under
0.8Polyurethane Flat Belts
Cordless 1.5~�.0
Polyurethane V Ribbed Belts [H] [J] �5 �.0~�.5
Polyurethane Round Belts
Endless�φ~ 5φ
10 0.5~1.0
Open End (Bancord)
1.5φ~ 15φ
10 �.0~5.0
Polyurethane Synchronous Belts
[XL][T5] [TN15]
[L] [T10]
�0Under 0.�5
Polyurethane Long SynchronousBelt (LSB-u)
10Under 0.�5
※1 As listed above, the numerical value shows permissible range of Elongation
1. COLOR CODE Recommended design area. Marginal design area - contact your local Bando distributor for further engineering information. Do not design in this area.
�. Numbers shown are maximums under normal operating conditions.�. Letters in [ ] show belt type.
7
TYPE OF BELT
Speed ratio Minimum pulley diameter (mm) Special applications
Under 1:5 1:5~1:10 Under
50 50~100 100~�00 OVER �00
Shock load
Horizontal drive
Backside ldler
Drive using backside
of beltRubber belts
V BeltsFractional H.P. [�L][4L] [5L]
Multiple [A]67 [B]118 [C]180
[D]�00 [E]450
Red-e � [SA]60 [SB]80 [SC]100
Double-V [AA]100 [BB]180 [CC]�60
Narrow V Belts 1:10 [�V]67 [5V]150 [8V]�00
Power Scrum (Banded Belts)
Narrow V type 1:10 [�V]67 [5V]150 [8V]�00
Multiple V type [A]67 [B]118 [C]180
[D]�00 [E]450
Variable Speed Belts [VA]45[VB]60 [VC]70 [VD]80
RIB-ACE 50V Ribbed Belts �0 75 175
Synchronous Belts 1:10
[MXL] 1�teeth [XL] [L] 10teeth
[H] 14teeth
[XH] ��teeth [XXH]
��teeth
STS 1:10
[S8M] 18teeth [S4.5M] 1�teeth [S5M]
1�teeth
[S14M] �8teeth
Long Synchronous Belts (LSB-R) 1:10
[MXL] [XL][L] [S4.5M] [S5M]
[S8M] [H]
[XH] [S14M] [XXH]
Polyurethane BeltsKing Power Synchronous Betl (KPS) 1:10 [S8M]
18teeth[S14M] ��teeth
Polyurethane V-Belts
FHP (�L) [�L]Cogged V Belts (VC) [J]16
Double cogged V Belts (DC) [J]16
Cordless (Bancollan V Belts)Open Ended (Bancord V Belts) [M]80 [A]100
[B]150
Banflex
Banded Banflex (BANFLEX Scrum) 1:10 [5MS]�6
[7MS]40[11MS]
6�Polyurethane Flat Belts Cordless (0.6mmt)6
(1.0mmt)10
Polyurethane V Ribbed Belts [H]14 [J]�4
Polyurethane Round Belts
Endless [�mmφ]18 [5mmφ]�0
Open End (Bancord)
[�mmφ] ��
[10mmφ] 80
Polyurethane Synchronous Belts 1:10
[TN15] �0teeth
[XL][L][T5] 15teeth [T10]
1�teeth
Polyurethane long Synchronous Belts (LSB-u) 1:10
[S�M] [S�M] [XL][L]
[T5][T10]
[S8M] [H] [XH] [XXH]
1. COLOR CODE Recommended design area. Marginal design area - contact your local Bando
distributor for further engineering information. Do not design in this area.
BELTCHARACTERISTS
8
Oil Resistance
Acid Resistance
Alkali Resistance
Ozone Resistance
Water Resistance
Flame Resistance
Low Noise
Vibration BELT TYPE
Rubber belt
Fractional H.P.V BeltsMultiple, RED-S
DOUBLE-V
Narrow V Belts
Narrow V typePower Scrum (Banded Belts)
Multiple V type
Variable Speed Belts
V Ribbed Belts
RIB-ACE
Synchronous Belts, STS
Long Synchronous Belt (LSB-R)
Polyurethane BeltsKing Power Synchronous Belts (KPS)
FHP (�L)
Polyurethane V-Belts
Cogged V Belts (VC)Double Cogged V Belts (DC)Cordless (Bancollan V Belts)Open Ended (Bancord V Belts)
Banflex
Banded Banflex
CordlessPolyurethane Flat Belts
Polyurethane V Ribbed Belts
EndlessPolyurethane Round BeltsOpen End
(Bancord)Polyurethane Synchronous BeltsPolyurethane Long Synchronous Belts (LSB-u)
1. COLOR CODE Belt is perfectly suitable for conditions shown. Belt is adequately suitable for conditions shown. Belt is marginally suitable for conditions shown, but not recommendable. DO NOT apply belt in these environments.
OPERATINGCONDITIONS
9
SelectionTableforBandoPowerTransmissionBelts–2Find the type of Belt you need in the first clumn. Then, reading across the page, find the belt that matches your operating conditions.
BELT TYPE
DRIVING CONDITIONSAmbient Temperature Range
Electrical conductivity
-40 -�0 -�0 -10 0 10 �0 �0 40 50 60 70 80 90 100 110 1�0 � (-40) (-��) (-4) (14) (��) (50) (68) (86) (104) (1��) (140) (158) (176) (194) (�1�) (��0) (�48) (�)
Rubber Belts
V BeltsFractional H.P. less than 6M�
Multiple RED-S DOUBLE-V
less than 6M�
Narrow V Belts less than 6M�
Power Scrum (Banded Belts)
Narrow V type less than 6M�
Multiple V type less than 6M�
Variable Speed Belts less than 6M�
V Ribbed Belts less than 6M�
RIB-ACE less than 6M�
Synchronous Belts, STSStandard less than 6M�
insulation over 100M�High Temperature Resistance
Long Synchronous Belts (LSB-R) less than 6M�
Polyurethane Belts
King Power Synchronous Belts 104~106M�
Polyurethane V Belts
FHP (�L) 104~106M�
Cogged V Belts (VC)
104~106M�
Double Cogged V Belts (DC)
104~106M�
Cordless (Bancollan V Belts)
104~106M�
Open End (Bancord V Belts)
104~106M�
Banflex 104~106M�
Banded Banflex 104~106M�
Polyurethane Flat Belte
Cordless 104~106M�
Polyurethane V Ribbed Belts 104~106M�
Polyurethane Round Belts
Endless 104~106M�
Open End (Bancord)
104~106M�
Polyurethane Synchronous Belts 104~106M�
Polyurethane Long Synchronous Belts (LSB-u)
104~106M�
10
3 1 2 4
Construction
1: Polyurethane backing�: Aramid tensile member�: Polyamid fiber loaded4: Polyurethane teeth
Features+Benefits
Exceptional power transmission capabilityThe KPS Belt can transmit 1.5 to 5 times more power than a standard STS belt drive. This allows the same power transmission capacity to be achieved using smaller pulleys, saving space and money.VersatileUtilize standard STS pulleys for a wide ratio selection.CleanWear resistant polyurethane construction reduces rubber dust.
Dimensions
HB
P
Type P H B
KPS� 8M 8.00 �.86 4.80KPS� 14M 14.00 5.00 8.50
�
�
�
Sizemark
600 KPS� 14M 1708
Belt pitch length (1708mm)Belt type (14mm tooth pitch)Belt width (mm) × 10 (60.0mm)
KPS�8M
Typenominalpitchlength(mm)
numberof
teethType
nominalpitchlength(mm)
Numberof
teethS8M640 640 80 S8M11�0 11�0 140
680 680 85 115� 115� 1447�0 7�0 90 1�00 1�00 150760 760 95 1�80 1�80 160800 800 100 1�60 1�60 170848 848 106 1440 1440 180896 896 11� 15�0 15�0 190944 944 118 1600 1600 �00
1000 1000 1�5 1696 1696 �1�10�4 10�4 1�8 179� 179� ��410�� 10�� 1�9 1960 1960 �451056 1056 1��
KPS�14M
Typenominalpitchlength(mm)
numberof
teethType
nominalpitchlength(mm)
Numberof
teethS14M994 994 71 S14M1568 1568 11�
11�0 11�0 80 1650 165� 1181190 1190 85 1708 1708 1��1�60 1�60 90 1890 1890 1�51400 1400 100 1960 1960 1401470 1470 105 ��80 ��80 170
StandardBeltwidth
(width mark: Belt width (mm)×10)
widthmark
150 �50 400 600 800 1000 1�00
Beltwidth(mm)
15 �5 40 60 80 100 1�0
KPS� 8MKPS� 14M
SYNCHRONOUS BELTS (POLYURETHANE)
KING POWER Synchronous Belts (KPS�)
11
24 3 1
Features
Exceptionally high power transmission capacityThis "high performance STS belt" achieves power transmission approximately 1.4 to 1.8 times as high as that with conventional STS belts.Compact designThe high power transmission can minimize the width of belt, thus making system design as compact as possible.Low noise level The high power transmission can minimize the width of belt, thus accomplishing a low noise operation.
*Conventional standard pulleys are also applicable.
*Standard belt sizes are available for the production of this belt.
�
�
�
Concept
Responding to needs for "Energy saving" and "High power t ransmiss ion" on indust r ia l machiner y in these years, we at BANDO have developed a "High-performance STS belt" capitalizing on our time-proven technology and experience.
Construction&Members
1.3.Rubber:
Using synthetic rubber having less tooth deformation and a high level of hardness.
2.Tensilemember:
Using fiber glass tensile member with considerations given to dimensional stability and flexibility.
4.Toothcanvas:
The tooth canvas has asperities on the surface and provides a low friction coefficient, accomplishing a low noise level of operation.Furthermore, the S14M Type provides two-ply tooth canvas, which enables further reductions in noise levels and improvement in durability.The HP-S5M Type is only avai lable for clean specification.
SYNCHRONOUS BELTS (RUBBER)
High-Performance STS Belts (HP-STS)
Dimensions
H2H1
P
W
Type P H1 H2 B
HP-S5M 5.00mm �.61mm 1.91mm �.�5mm
HP-S8M 8.00mm 5.00mm �.05mm 5.�0mm
HP-S14M 14.00mm �.70mm 5.�0mm 9.10mm
StandardBeltWidth
Sizemark
600 HP-S8M 1000
Belt pitch length (mm)
Belt type
Belt width (mm) × 10 (60mm)
WidthMark 100 150 �00 �50 400 600 800 1000 1�00
Width(mm) 10 15 �0 �5 40 60 80 100 1�0
HP-S5M � � �
HP-S8M � � � �
HP-S14M � � � � �
1�
SYNCHRONOUS BELTS (RUBBER)
Long Synchronous / STS Belts (LSB-R)
1 2
3
4
Construction
1: Chloroprene rubber backing�: Glass Fiber tensile member�: Chloroprene rubber teeth4: Nylon canvas
Features+Benefits
Al low for synchronous power t ransmiss ion and conveyance over longer spans than those available with traditional molded belts.Compared to chain drives, these belts are lighter, produce much less noise, and are much cleaner as they need no lubrication. In factory automation applications, these belts are perfectly suited to replace chain, flat power transmission belts, and conveyor belts.Seamless
Having no joints, they are as capable of transmission and conveyance as standard timing belts are. Belts can be manufactured in a length having the number of teeth that you specify. Belts can be manufactured to special specifications (reverse side logo, white color, etc.).
Endless
On-site endless processing is available. Increasing the number of joints allows synchronous conveyance or synchronous transmission over any span length.
Open-end
Capable of accurate reciprocating motion in indexing applications.
�
�
�
�
�
�
Dimensions
Long STS Belts
h1
h2
P
Unit: mm ( ) Dimension in seamless
Type P h1 h2
S�M �.0 0.76 1.�1S�M �.0 1.14 �.10
S4.5M 4.5 1.71 �.70S5M 5.0 1.91 �.6S8M 8.0 �.05 5.�0(6.05)
S14M 14.0 5.�0 (11.�0)
Long Synchronous Belts
P
h2
h1
Unit: mm ( ) Dimension in seamless
Type P h1 h2
MXL �.0�� 0.51 1.10XL 5.080 1.�5 �.�5L 9.5�5 1.90 �.50H 1�.700 �.�0 5.�0(5.�0)
XH ��.��5 6.�0 (1�.�0)XXH �1.75 9.60 (16.10)
Sizemark
Seamless (Without Joints) (Synchronous Belts)
�00 XH 1000
Belt length (mm)
Belt Type
Belt Nominal width (�': 50.8mm)
Seamless (Without Joints) (STS Belts)
500 S14M 7850
Belt length (mm)
Belt Type
Belt Nominal width (50mm)
Open-end (Synchronous Belts)
XL 0�5 × 5�M
Belt length (m)
Nominal width (0.�5': 6.4mm)
Belt Type
Open-end(STSBelts)�50 S8M × �0M
Belt length (m)
Belt Type
Nominal width (�5mm)
StandardSizes
Seamless(WithoutJoints)Type StandardNominalwidth Rangeofavailablebelt
H
100,�00,400,600,800,1000(inch × 100)
4.7~�0m
XH
XXH
S8M �50,500,1000,1500,�000,�000 (mm × 10)S14M
Unit: m
Open-end
Nominalwidth 019 025 031 037 050 075 100 150 200 300 Nominalwidth 50 60 70 80 100 140 150 200 250 300 400 500 600Width (mm) 4.8 6.4 7.9 9.5 1�.7 19.1 �5.4 �8.1 50.8 76.� Width (mm) 5 6 7 8 10 14 15 �0 �5 �0 40 50 60
MXL 4� �1 �5 41 �0 S�M 40 �5 �0 50XL 5� 4� �5 �6 �� S�M 50 40L 49 �� 47 S4.5M 45 40 �8H 4� �1 40 �8 17 S5M 40 40 40 �0 �4
S8M 40 50 40 �0 5� �8 �9 �4
P
h1
h2
P
h1
h2
1�
1 2
3
Construction
1: Polyurethane teeth�: Polyurethane backing�: Tensile member
Features+Benefits
The polyurethane construction of these long span belts make them ideally suited for synchronous transmission and conveyance in food processing machinery and other applications requiring a clean, dust-free drive.Endless
long-span belts capable of synchronous transmission and synchronous conveyance.
Open-end
Capable of accurate reciprocating motion in indexing applications.
StandardSizes
Endless(WithJoints) Openend
TypeStandardNominal
widthMaximumWidthin
mm(Nominalwidth)Maximumlength(m)
Minimumlength(m)
TypeStandardNominal
widthMaximumWidthin
mm(Nominalwidth)Max
length(m)S5M 100,150,�00,�50,�00,400,500 50(500) 50 0.5 S�M 50,100,150,�00,�50
�00,�50,40040(400) 60
S8M150,�00,�50,�00,400,500
750,1000 100(1000) �0 1.0�.0 S�M 60,1�0,180,�40,�00
�60,4�0,48048(480) 60
XL 0�5,0�1,0�7,050,075 100,150,�00 50.8(�00)
500.5
S5M 100,150,�00,�50,�00,400,500 50(500) 50L 050,075,100,150,�00 50.8(�00) 50 0.5 S8M 150,�00,�50,�00,400,500
750,1000100(1000) �0
H075,100,150,�00
�00,400 101.6(400) 50 0.5�.0 XL 0�5,0�1,0�7,050,075
100,150,�0050.8(�00) 50
T5 7,10,15,�0,�5,�0,40,50 50 50 0.5
T1015,�0,�5,�0,40,50
75,100 100 50 0.5�.0
L 050,075,100,150,�00 50.8(�00) 50H 075,100,150,�00,�00,400 101.6(400) 50T5 7,10,15,�0,�5,�0,40,50 50 50T10 15,�0,�5,�0,40,75,100 100 50
�
�
DimensionsBancollan Long STS Belts
Unit: mm ( )
Type P h1 h2
S�M �.00 0.76 1.40S�M �.00 1.14 �.00S�M 5.00 1.81 �.81S8M 8.00 �.85 5.00
Bancollan Long Synchronous Belts
Unit: mm ( )
Type P h1 h2
XL 5.080 1.�5 �.�5L 9.5�5 1.90 �.50H 1�.700 �.�0 4.�0T5 5.00 1.�0 �.�0
T10 10.00 �.50 4.50
Sizemark
�5 T10 - 890 S W - Jjointcord material (mark)Polyurethane material (mark)teeth numberBelt TypeBelt Nominal width (mm)
�40 S�M - 1000 L Wcord material (mark)Polyurethane material (mark)teeth numberBelt TypeBelt Nominal width (�40:�4mm)
0�7 XL - 1015 S Wcord material (mark)Polyurethane material (mark)teeth numberBelt TypeBelt Nominal width (0.�7inch=9.5mm)
Polyorethane material markS···(standard translucent)W···(standard milky-white)L ···(low friction milky-white)low friction milky-white)
cord markW···steel cordK ···aramid cord
M···(moisture and heat resistant milky-white)
SYNCHRONOUS BELTS (POLYURETHANE)
Bancollan Long Synchronous / STS Belts (LSB-U)
H2 H
1
P
W
θ
14
2134
Construction
1: Chloroprene rubber backing.�: Glass Fiber tensile member.�: Chloroprene rubber tooth.4: Nylon canvas
Dimensions
Type P W H1 H2 �
MXL Mini Synchro �.0��mm(0.080")
(0.76)0.0�0
(1.1)0.04�
(0.51)0.0�0 40˚
XL Extra Light 5.08mm (0.�00")
(1.�5) 0.054
(�.�5) 0.09
(1.�5) 0.050 50˚
L Light 9.5�5mm (0.�75")
(�.�) 0.1�8
(�.5) 0.14
(1.9) 0.075 40˚
H Heavy 1�.7mm (0.500")
(4.4) 0.175
(4.�) 0.17
(�.�) 0.090 40˚
XH Extra Heavy ��.��5mm(0.875")
(8.0) 0.�1�
(11.�) 0.44
(6.�) 0.�50 40˚
XXH Double Extra Heavy �1.75mm (1.�50")
(1�.�) 0.477
(15.8) 0.6�
(9.6) 0.�75 40˚
StandardBeltWidth
BELTWIDTHNominalWidth 0�5 0�1 0�7 050 075 100 150 �00 �00 400 500 600
inch 1/8 �/16 1/4 5/16 �/8 1/� �/4 1 1-1/� � � 4 5 6mm �.� 4.8 6.4 7.9 9.5 1�.7 19.0 �5.4 �8.1 50.8 76.� 101.6 1�7.0 15�.4
MXL � � � � �
XL � � � � �
L � � � � �
H � � � � �
XH � � � � �
XXH � � � � �
Features
Non-slipAccurate tooth dimensions and minimal elongation virtually eliminate slippage and speed variation.No maintenanceNo lubrication is required.No high initial tension, thus keeping the bearing load very low.Space savingUtilizes small pulleys and short center distances.
Sizemark
(MXL)140 MXL 9.5
Belt width in mm
Belt Type
Number of teeth
(XL,L,H,XH,XXH)
140 XL 0�5Belt width 0.�5" (1/4")
Belt Type
Pitch length in inches ×10 (14"×10-140)
�
�
�
�
SYNCHRONOUS BELTS (RUBBER)
SYNCHRONOUS BELTS
15
StandardSizes
BELTTYPE PITCH BELTNUMBER
MXL※ (Rubber)
�.0��mm (0.080")
4 4 、 4 5 、 4 8 、 5 0 、 5 � 、 5 � 、 5 4 、 5 5 、 5 6 、 5 7、 5 9 、 6 0 、 6 1 、 6 � 、 6 � 、 6 4 、 6 5 、 6 7 、 6 8 、 6 9 、 7 0 、 7 1 、 7 � 、 7 � 、 7 4 、 7 5 、 7 6 、 7 7 、 7 8 、 7 9 、 8 0 、 8 1 、 8 � 、 8 � 、 8 4 、 8 5 、 8 6 、 8 7、 8 8 、 9 0 、 9 1 、 9 � 、 9 � 、 9 4 、 9 5 、 9 6 、 9 7、 9 8 、 9 9 、1 0 0 、1 0 1 、1 0 � 、1 0 � 、1 0 4 、1 0 5 、1 0 6 、1 0 8 、1 0 9 、 1 1 0 、1 1 � 、1 1 4 、1 1 5 、1 1 8 、1 1 9 、1 � 0 、1 � 1 、1 � � 、1 � � 、1 � 4 、1 � 5 、 1 � 6 、1 � 7、1 � 8 、1 � 9 、1 � 0 、1 � 1 、1 � � 、1 � 4 、1 � 5 、1 � 7、1 � 8 、1 4 0 、 1 4 � 、1 4 4 、1 4 5 、1 4 6 、1 4 8 、1 5 0 、1 5 1 、1 5 5 、1 5 8 、1 5 9 、1 6 0 、1 6 � 、 1 6 � 、1 6 4 、1 6 5 、1 6 9 、1 7 0 、1 7 5 、1 7 7、1 8 0 、1 8 4 、1 8 8 、1 9 0 、1 9 � 、 1 9 5 、1 9 6 、 � 0 0 、 � 0 4 、 � 0 5 、 � 0 8 、 � 1 0 、 � 1 � 、 � 1 5 、 � � 0 、 � � 1、 � � � 、 � � 4 、 � � 5 、 � � 6 、 � � 8 、 � � 0 、 � � � 、 � � 4 、 � � 6 、 � � 9、 � 4 0 、 � 4 5 、 � 4 8 、 � 4 9 、 � 5 0 、 � 51、 � 5 5 、 � 5 6 、 � 6 0 、 � 6 � 、 � 6 5 、 � 6 8 、 � 7 1、 � 7 � 、 � 7 5 、 � 8 0 、 � 8 1、 � 8 5 、 � 8 8 、 � 9 0 、 � 9 5 、 � 9 7、 � 0 0 、 � 0 5 、 � 0 8 、 � 1 0 、 � 1 � 、 � 1 5 、 � 1 8 、 � � 0 、 � � � 、 � � 6 、 � � 8 、 � � 0 、 � � � 、 � � 4 、 � � 6 、 � � 7、 � 4 7、 � 5 0 、 � 5 4 、 � 5 5 、 � 5 8 、 � 5 9 、 � 6 0 、 � 6 4 、 � 6 5 、 � 7 1、 � 7 � 、 � 8 0 、 � 8 8 、 � 9 7、 4 0 0 、 4 0 � 、 4 0 5 、 41 0 、 41 � 、 4 � 5 、 4 � 1、 4 � 4 、 4 � 5 、 4 4 0 、 4 4 8 、 4 5 � 、 4 6 4 、 4 6 8 、 4 7 � 、 4 7 5 、 4 8 0 、 4 8 7、 4 9 � 、 4 9 8 、 5 0 0 、 5 1 6 、 5 � � 、 5 �4、 5 � 5、 5 � 5、 5 5 0、 5 91、 61�、 6 6 5
XL (Rubber)
5.08 (0.�00")
5 0 、 6 0 、 6 4 、 6 8 、 7 0 、 7 � 、 7 4 、 7 6 、 7 8 、 8 0 、 8 4 、 8 8 、 9 0 、 9 � 、 9 4 、 9 6 、 9 8 、1 0 0 、1 0 � 、1 0 4 、1 0 6 、1 0 8 、11 0 、11 � 、114 、11 6 、11 8 、1 � 0 、 1 � � 、1 � 4 、1 � 6 、1 � 8 、1 � 0 、1 � � 、1 � 4 、1 � 6 、1 � 8 、1 4 0 、1 4 � 、1 4 4 、 1 4 6 、1 4 8 、1 5 0 、1 5 � 、1 5 4 、1 5 6 、1 5 8 、1 6 0 、1 6 � 、1 6 4 、1 6 6 、1 6 8 、 1 7 0 、1 7 � 、1 7 4 、1 7 6 、1 7 8 、1 8 0 、1 8 � 、1 8 4 、1 8 8 、1 9 0 、1 9 4 、1 9 6 、 1 9 8 、 � 0 0 、 � 0 � 、 � 0 6 、 � 0 8 、 � 1 0 、 � 1 � 、 � 14 、 � 1 6 、 � � 0 、 � � � 、 � � 4 、 � � 8 、 � � 0 、 � � 4 、 � 4 0 、 � 4 4 、 � 4 8 、 � 5 0 、 � 6 0 、 � 6 � 、 � 6 6 、 � 7 0 、 � 7 6 、 � 8 0 、 � 8 � 、 � 9 0 、 � 0 0 、 � 1 0 、 � 14 、 � � 0 、 � � � 、 � � 0 、 � 4 0 、 � 4 4 、 � 4 8 、 � 5 � 、 � 5 6 、 � 6 0 、 � 6 4 、 � 7 0 、 � 7 � 、 � 7 6 、 � 8 4 、 � 8 6 、 � 8 8 、 � 9 0 、 � 9 6 、 4 0 0 、 4 0 8 、 4 � 4 、 4 � 0 、 4 5 0 、 4 5 6 、 4 6 0 、 4 7 0 、 4 9 0 、 4 9 6 、 5 1 0 、 5 4 0 、 5 6 4 、 5 9 � 、 6 0 8 、 6 � 0 、 6 � 8 、 6 8 6 、 8 � 8 、 8 6 0 、 8 8 8 、 9 0 0 、 9 0 8 、 9 14 、 9 � 6、 1014、 10 � 0
BELTTYPE PITCH BELTNUMBER
L (Rubber)
9.5�5mm (0.�75")
9 8 、1 0 9 、1 � 4 、1 � 5 、1 5 0 、1 6 5 、1 6 9 、1 7 � 、1 8 7、 � 0 � 、 � 1 0 、 � 1 8 、 � � 5 、 � 4 0 、 � 4 8 、 � 5 5 、 � 6 � 、 � 7 0 、 � 7 7、 � 8 5 、 � 0 0 、 � 0 4 、 � 1 5 、 � � 0 、 � � � 、 � � 4 、 � � 7、 � 4 5 、 � 6 0 、 � 6 7、 � 7 5 、 � 8 � 、 � 9 0 、 � 9 4 、 4 � 0 、 4 � 7、 4 � 6 、 4 � 9 、 4 4 6 、 4 5 0 、 4 6 5 、 4 8 0 、 5 1 0 、 5 14 、 5 � 5 、 5 4 0 、 5 4 8 、 5 8 1、 6 0 0 、 6 0 5 、 6 1 9 、 6 � 0 、 6 4 0 、 6 5 � 、 6 6 0 、 6 9 7、 7 � 8 、 7 � 1、 7 6 7、 7 8 0 、 7 8 8、 8 0 6、 8 5 5、 8 6 �、 8 81、 915、 919、 9 � 8、 1� 9 4
H (Rubber)
1�.700mm (0.5")
1 8 5 、 � � 5 、 � � 0 、 � 4 0 、 � 4 5 、 � 7 0 、 � 8 0 、 � 0 0 、 � 1 0 、 � 1 5 、 � � 0 、 � � 0 、 � 4 0 、 � 5 0 、 � 6 0 、 � 7 0 、 � 7 5 、 � 9 0 、 4 0 0 、 41 0 、 4 � 0 、 4 � 0 、 4 5 0 、 4 6 5 、 4 8 0 、 4 9 0 、 51 0 、 5 � 0 、 5 4 0 、 5 6 0 、 5 6 5 、 5 7 0 、 5 8 0 、 6 0 0 、 6 0 5 、 6 � 0 、 6 4 0 、 6 5 0 、 6 6 0 、 6 8 0 、 7 0 0 、 7 � 0 、 7 5 0 、 7 6 0 、 7 7 0 、 8 0 0 、 8 1 0 、 8 � 0 、 8 4 0 、 8 5 0 、 8 6 0 、 8 8 0 、 9 0 0 、 9 5 0 、 9 8 5 、1 0 0 0 、1 0 � 0 、1 0 5 0 、11 0 0 、 11� 0、 114 0、 1� 5 0、 1� � 5、 1� 5 0、 14 0 0、 16 8 0、 17 0 0
XH (Rubber)
��.��5mm (0.875")
5 0 7、 5 6 0、 6 � 0、 7 0 0、 7 � 5、 7 7 0、 8 4 0、 8 7 5、 9 � 7、 9 8 0、11� 0、1� 6 0、 14 0 0、 15 4 0、 17 5 0
XXH (Rubber)
�1.750mm (1.�50")
7 0 0、 8 0 0、 9 0 0、 10 0 0、 1� 0 0、 14 0 0、 16 0 0、 18 0 0、 1915
※ For MXL (only) belt number equals number of teeth. All others refer to pitch length in inches.
SYNCHRONOUS BELTS (RUBBER)
SYNCHRONOUS BELTS
H2H1
P
W
16
24 3 1
Features
High torque capacity driveUnique tooth profile enables the belt to transmit higher power.Lower noise levelSmoother tooth engagement and direct contact of tooth top with the pulley grooves' enables the belt to run quietly even at high speeds.Long service lifeAs the belt tooth meshes with the pulley grooves, the cord lay forms an almost true circle. This minimizes the cantilever effect on the cords, resulting in reduced bending fatigue and longer service life.No maintenanceNo lubrication or retension required.Space savingDue to Higher Power Transmission Capacity, the belt width and the pulley width can be designed narrower. This means machine space can be reduced and the machine can be designed more compactly.
StandardBeltWidth
WidthMark 40 60 100 150 �00 �50 400 600 800 1000 1�00Width(mm) 4 6 10 15 �0 �5 40 60 80 100 1�0
S1.5M � � �
S2M � � � � �
S3M � � �
S4.5M � � �
S5M � � � �
S8M � � � �
S14M � � � � �
�
�
�
�
�
Construction
1: Chloroprene rubber backing�: Glass Fiber tensile member�: Chloroprene rubber tooth4: Nylon canvas
Dimensions
Type P h1 h2 WS1.5M 1.5mm 0.57mm 1.1�mm 0.98mm
S�M�.0mm(0.078")
1.�1mm(0.05�")
0.76mm(0.0�9")
1.�mm(0.051")
S�M�.0mm(0.118")
�.1mm(0.08�")
1.14mm(0.044")
1.95mm(0.076")
S4.5M4.5mm(0.177")
�.70mm(0.106")
1.71mm(0.067")
�.9�mm(0.115")
S5M5.0mm(0.197")
�.61mm(0.14�")
1.91mm(0.075")
�.�5mm(0.1�8")
S8M8.0mm(0.�15")
5.�mm(0.�1�")
�.05mm(0.1�0")
5.�0mm(0.�05")
S14M14.0mm(0.551")
10.�mm(0.40�")
5.�0mm(0.�09")
9.10mm(0.�58")
Sizemark
600 S8M 1000Belt pitch length (1000mm)
Belt type (8mm tooth pitch)
Belt width (mm) × 10 (60mm)
SYNCHRONOUS BELTS (RUBBER)
SUPER TORQUE SYNCHRONOUS (STS) BELTS
17
StandardBeltLength
BELTTYPEBELTPITCH
(mm)BELTNUMBER(PITCHLENGTHmm)
S1.5M (Rubber)
1.5 9 � 、9 � 、9 5 、9 8 、9 9 、1 0 1、1 0 � 、1 0 8 、11 9 、1 � 4 、1 5 0 、1 5 8 、1 6 1、1 6 4 、 1 6 5 、1 6 8 、174 、18 0 、18 5 、18 6 、� 0 4 、� 0 6 、� 1 0 、� � 4 、� � 5 、� � 6 、� 4 0 、 � 5 5 、� 6 1、� 6 � 、� 7 � 、� 8 1、� 8 8 、� 9 0、� 0 � 、� 0 5 、� 15 、� � 5 、� 9 0、4 41、 4 4 4、4 8 0、1116
S�M (Rubber)
�.0 8 6 、 8 8 、 9 0 、 9 � 、 9 4、 9 8 、10 0 、10 � 、10 4、10 6 、10 8 、11� 、114、116 、118、1�0、1��、1�4、1�6、1�8、1�0、1��、1�4、1�8、140、14�、144、148、150、15�、156、158、160、16�、164、166、168、170、17�、174、176、178、180、18�、184、186、190、19�、194、198、 �00、 �0�、 �04、 �10、 �1�、 �14、�16、 �18、 ��0、 ���、 ��4、 ��6、 ��0、 ���、 ��4、 ��6、 ��8、 �40、 �4�、 �44、�48、 �50、 �54、 �56、 �58、 �60、 �6�、 �64、 �66、 �7�、 �74、 �78、 �80、 �8�、�84、 �86、 �88、 �90、 �9�、 �96、 �00、 �08、 �10、 �1�、 �14、 �16、 �18、 ��0、���、 ��4、 ��6、 ��8、 ��0、 ���、 ��8、 �40、 �4�、 �44、 �50、 �60、 �64、 �70、�7�、 �74、 �76、 �80、 �86、 �90、 �96、 400、 406、 408、 416、 4�0、 4�6、 4�8、4�8、 448、 45�、 454、 460、 468、 474、 486、 490、 494、 500、 5�0、 5�0、 5��、540、 550、 558、 560、 57�、 580、 594、 596、 600、 604、 606、 6�0、 6�0、 6��、650、 65�、 656、 668、 676、 69�、 700、 710、 74�、 75�、 754、 766、 796、 800、 810、 8�6、 898、 900、 940、 946、 950、 984、1000、10��、10�6、1066、1074、 1100、 1110、 11�6、 1154、 1166、 1��4、 1��8
S�M (Rubber)
�.0 1��、1�9、144、150、156、159、16�、168、171、174、177、180、18�、186、189、19�、195、198、 �01、 �04、 �07、 �10、 �1�、 �19、 ���、 ��5、 ��8、 ��4、��7、 �40、 �4�、 �46、 �49、 �5�、 �55、 �58、 �64、 �67、 �70、 �7�、 �76、 �79、�8�、 �85、 �88、 �91、 �97、 �00、 �0�、 �09、 �1�、 �15、 �18、 ��4、 ��7、 ��0、���、 ��6、 ��9、 �4�、 �51、 �54、 �60、 �6�、 �66、 �69、 �7�、 �75、 �78、 �84、�87、 �90、 �96、 �99、 40�、 405、 408、 417、 4�0、 4��、 4�6、 4��、 4�8、 444、447、 45�、 459、 468、 471、 474、 480、 486、 489、 49�、 498、 501、 507、 51�、516、 519、 5��、 5�5、 5�4、 5�7、 540、 549、 55�、 555、 564、 57�、 579、 588、597、 600、 609、 6�1、 6��、 648、 657、 660、 666、 681、 690、 699、 7�6、 7�5、741、 750、 768、 771、 789、 804、 810、 8�5、 85�、 88�、 885、 888、 900、 918、9�7、 9�6、 990、 1119、 11�4、 1146、 1188、 1�99、 1419、 15�0
S4.5M (Rubber)
4.516�、180、198、 ��5、 ��9、 �5�、 �79、 �84、 �15、 ��4、 �51、 �8�、 �96、 450、491、 504、 518、 558、 56�、 61�、 6�0、 711、 7�9、 801、 10�1、 �111
S5M (Rubber)
5.0 ��5、 ��0、 �55、 �75、 �95、 �00、 ��0、 ��5、 �50、 �75、 �80、 �90、 400、 410、4�0、 4�5、 4�5、 440、 445、 450、 475、 490、 500、 5�0、 5�5、 550、 560、 565、570、 575、 600、 6�5、 6�5、 645、 650、 665、 670、 675、 695、 700、 710、 7�5、740、 750、 765、 770、 775、 800、 810、 8�0、 850、 860、 870、 900、 9�0、 940、950、 965、 975、 1000、 10�5、 1050、 11�5、 11�5、 1145、 1195、 1��5、 1�50、1�60、 1�70、 1�95、 1�50、 14�0、 1595、 1715、 1800、 �000
S8M (Rubber)
8.0 �5�、 �84、 408、 4�4、 456、 480、 5�0、 5�8、 560、 584、 600、 6��、 640、 656、67�、 680、 71�、 7�0、 7�8、 760、 800、 8�4、 840、 848、 880、 888、 896、 9�0、944、 960、 976、 984、1000、10��、1040、1056、1096、11�0、11�6、115�、1160、1184、119�、1�00、1�16、1��4、1�40、1�48、1�7�、1�80、1�96、1�1�、1�44、1�5�、1�84、1�9�、1400、14�4、1440、1480、15�0、155�、1600、17�8、1760、1776、1800、1808、1880、195�、 �000、 �1�0、 �160、 ��40、 ��04、 �400、 �496、�560、 �600、 �800、 �880、 �944、 ��00、 �600、 �7�0、 �904、 4400
S14M (Rubber)
14.01008、11�0、1190、1�46、1400、1540、1610、165�、1778、1806、1890、1904、1960、 �00�、 �100、 ��40、 ��10、 ��80、 �450、 �506、 �590、 �660、 �800、 �150、 ��48、 �500、 �556、 �850、 4004、 4060、 4��6、 4508、 501�
SYNCHRONOUS BELTS (RUBBER)
SUPER TORQUE SYNCHRONOUS (STS) BELTS
18
SYNCHRONOUS BELTS (RUBBER)
DOUBLE SIDED SYNCHRONOUS / STS BELTSDOUBLE SIDED STS BELTS DOUBLE SIDED SYNCHRONOUS BELTS
2 1
3
2
3
1
Construction1: Nylon Canvas �: Chloroprene rubber backing �: Glass fiber tensile member
DimensionandSizemark
�50 D - S8M 1400
Nominal Length in mmTypeDOUBLE SIDEDNominal width in mm × 10
600 D - H 150
Nominal Width in inch × 100TypeDouble sidedNominal length in inch × 10
StandardSizes
Type P(mm)Nominal
WidthNominal Length
DS�M �40, 60,
100
�00 �04 �06 �08 �10 �1� �14 �16 �18 ��0 ��� ��4 ��6 ��8 ��0 ��� ��4 ��6 ��8 �40 �4� �44 �50 �54 �60 �64 �70 �7� �74 �76 �80 �86 �90 �96 400 406 408 410 416 4�0 4�6 4�8 4�4 4�6 4�8 440 448 45� 454 456 460 468 474 480 486 490 494 500 506 5�0 5�4 5�0 5�� 540 550 558 560 57� 580 594 596 600 604 606 6�0 6�0 6�� 650 65� 654 656 660 668 676 69� 700 710 7�6 74� 75� 754 766 796 800 810 8�6 8�8 848 864 898 900 940 946 950 984 1000 10�0 10�4 10�� 10�6 104� 1064 1066 1074 1086 1094 1100 1110 11�6 1154
DS�M �60, 100, 150
�00 �0� �06 �09 �09 �1� �15 �18 ��4 ��7 ��0 ��� ��6 ��9 �4� �51 �54 �60 �6� �66 �69 �7� �75 �78 �84 �87 �90 �96 �99 40� 405 408 417 4�0 4�� 4�6 4�� 4�8 444 447 45� 459 468 471 474 480 486 489 49� 498 501 507 51� 516 519 5�� 5�5 5�4 5�7 540 549 55� 555 564 57� 579 588 597 600 609 6�1 6�� 6�6 648 657 660 666 681 690 699 7�0 7�6 7�5 741 750 768 771 789 804 810 8�5 85� 858 88� 885 888 900 909 918 9�7 9�6 954 990 999 1014 1050 1119 11�4 1146 1176 1188 1�99 1419 15�0
DS5M 5 �
4�0 4�5 4�5 440 445 450 476 490 500 5�0 5�5 550 560 565 570 575 600 6�5 6�5 645 650 665 670 675 695 700 710 7�5 740 750 765 770 775 780 800 810 8�0 850 860 870 900 9�0 940 950 965 975 1000 10�5 1050 1085 11�5 11�5 1145 1195 1��5 1�50 1�60 1�70 1�95 1�50 14�0 1595 1715 1800 1860 �000
DS4.5M 4.560, 100,
150450, 491, 504, 518, 558, 56�, 61�, 6�0, 711, 7�9, 801, 10�1
DS8M 8.0 150, �50, 400, 600
480, 5�0, 5�8, 560, 584, 600, 6��, 640, 656, 67�, 680, 71�, 7�0, 7�8, 760, 800, 8�4, 840, 848, 880, 888, 896, 9�0, 944, 960, 976, 984,1000, 10��, 1040, 1056, 1096, 11�0, 11�6, 115�, 1160, 1184, 119�, 1�00, 1�16, 1��4, 1�40, 1�48, 1�7�, 1�80, 1�96, 1�1�, 1�44, 1�5�, 1�84, 1�9�, 1400, 14�4, 1440, 1480, 15�0, 155�, 1600, 17�8, 1760, 1776, 1800, 1808, 1880, 195�, �000, �1�0, �160, ��40, ��04, �400, �496, �560, �600, �800, �880, �944, ��00, �500, �7�0, �904, 4400
DS14M 14.0
400, 600, 800, 1000, 1�00
1008, 11�0, 1190, 1�46, 1400, 1540, 1610, 165�, 1778, 1806, 1890, 1904, �00�, �100, ��40, ��10, ��80, �450, �506, �590, �660, �800, �150, ��48, �500, �556, �850, 4004, 4060, 4��6, 4508, 501�
※Please contact us.
Type P(mm)Nominal
WidthNominal Length
DXL 5.0800�5, 0�1, 0�7, 050,
075,
160, 16�, 164, 166, 168, 170, 17�, 174, 176, 178, 180, 18�, 184, 188, 190, 194, 196, 198, �00, �0�, �06, �08, �10, �1�, �14, �16, ��0, ���, ��4, ��8, ��0, ��4, �40, �44, �48, �50, �60, �6�, �66, �70, �76, �80, �8�, �90, �00, �10, �14, ��0, ���, ��0, �40, �44, �48, �5�, �56, �60, �64, �70, �7�, �76, �84, �86, �88, �90, �96, 400, 408, 4�4, 4�0, 450, 456, 460, 470, 490, 496, 510, 540, 564, 59�, 608, 6�0,
DL 9.5�5050, 075, 100, 150,
�00,
165, 169, 17�, 187, �0�, �10, �18, ��5, �40, �48, �55, �6�, �70, �77, �85, �00, �04, �15, ��0, ���, ��4, ��7, �45, �60, �67, �75, �8�, �90, �94, 4�0, 4�7, 4�6, 4�9, 446, 450, 465, 480, 510, 514, 5�5, 540, 548, 581, 600, 605, 619, 6�0, 640, 65�, 660, 697, 7�8, 7�1, 767, 780, 788, 806, 855, 86�, 881, 915, 919, 9�8
DH 1�.700075, 100, 150, �00,
�00,
185, ��5, ��0, �40, �45, �70, �80, �00, �10, �15, ��0, ��0, �40, �50, �60, �70, �75, �90, 400, 410, 4�0, 4�0, 450, 465, 480, 490, 510, 5�0, 540, 560, 565, 570, 580, 600, 605, 6�0, 640, 650, 660, 680, 700, 7�0, 750, 760, 770, 800, 810, 8�0, 840, 850,860, 880, 900, 950, 985, 1000, 10�0, 1050, 1100,11�0, 1140, 1�50, 1��5, 1�50, 1400, 1680, 1700
19
1 2
DXL
1 2
DT5, DT10
Construction
1: Polyurethane Teeth �: Steel wire tensile member
DimensionsandSizemark
180 D × L 0�7 UK
Material Mark
Nominal width in inch × 100
Type
Nominal length in inch × 10
�5 D T 10 1800
Pitch length in mm
Type
Nominal Width in mm
StandardSizes
Type P(mm)Nominal
WidthNominal Length
DXL 5.0800�5, 0�1, 0�7, 050,
075
140, 146, 150, 166, 170, 180, 190, �00, �10, ��0, ��0, �40, �70, �90, �00, ��0, �76, 400, 4�0, 490
Type P(mm)Nominal
WidthNominal Length
DT5 5.005, 10, 15,
�0, �5�00, 410, 460, 480, 515, 550, 590, 6�0, 650, 700, 750, 800, 815, 860, 900, 940, 1075, 1100
DT10 10.0015, �0,
�5, �0, 50
�60, 5�0, 6�0, 660, 700, 7�0, 800, 840, 900, 980, 1100, 1�10, 1�40, 1�50, 1��0, 1�50, 14�0, 1500, 1610, 1800, 1880
SYNCHRONOUS BELTS (POLYURETHANE)
BANCOLLAN DOUBLE SIDED SYNCHRONOUS / STS BELTS
�0
24 3 1 Construction
1: Chloroprene rubber backing�: Glass fiber tensile member�: Chloroprene rubber tooth4: Nylon canvas
Dimensions
H2
P
H1
Sizemark
1000 8M 50
Belt Width (mm)Belt TypeBelt Pitch length
Type P H1 H�8M 8.0mm 5.�mm �.5mm14M 14.0mm 10.�mm 6.0mm
StandardSizes
StandardBeltWidth
Width(mm) �0 �5 �0 40 50 55 60 70 85 100 115 1�0 150 1708M � � � � � - � - � - - - - -
14M - - � � - � - � � � � � � �
Belt Type Belt number (Pictch length mm)
8M �84, 4�4, 480, 560, 600, 6�4, 640, 656, 680, 7�0, 760, 800, 840, 856, 880, 896, 9�0, 960, 1000, 1040, 1056, 1064, 1080, 11�0, 115�, 1160, 1184, 119�, 1�00, 1��4, 1�48, 1�64, 1�80, 1�04, 1�60, 1�9�, 1400, 14�4, 1440, 1480, 151�, 15�0, 1584, 1600, 1680, 17�8, 1760, 1800, 1904, �000, �056, �064, �080, �104, �1�0, �160, �180, ��40, ��48, ��7�, ��04, ��60, �400, �4��, �504, �584, �600, �648, �660, �7�0, �800, �904, �940, �000, �048, �07�, �15�, ��00, ��48, ��80, ��5�, ��60, �448, �55�, �600, �648, �75�, �87�, 4000, 41�0, 4�48, 4�68, 4400, 4504, 46�4, 475�, 487�, 5000
14M 966, 109�, 1190, 1�44, 1400, 1456, 1540, 1610, 1680, 1778, 1890, �00�, �058, �100, �114, �184, �198, ��40, ��96, ��10, ��66, �4�6, �450, �506, �576, �590, �646, �716, �800, �898, �996, �066, �150, ��48, ��46, ��60, �444, �500, �556, �654, �75�, �850, �864, 4004, 4116, 4�56, 4��6, 4�68, 4494, 4578, 46�0, 4746, 487�, 4956, 4998
SYNCHRONOUS BELTS (RUBBER)
HTS Belts
BANCOLLAN STS BELTS
�1
213
Construction
1: Polyurethane backing �: Steel cord tensile members (For MXL, Aramid tensile members)�: Polyurethane teeth
Features
Non-slipAccurate tooth dimension and steel cord ensures minimal stretching, no slippage and constant spends.High oil and ozone resistance.Special backside surfaces are available.Bando can mold virtually any special configuration on the belt's backside surface.
Sizemark
(MXL)140 MXL 9.5 U K
Cord markMaterial mark (polyurethane)Belt width in mmBelt typeNumber of teeth
(T2.5,T5,T10)10 T5 - �80
Pitch length mmBelt typeBelt width in mm
Sizemark
60 S�M �00 U GCord markMaterial mark (polyurethane)Pitch length in mm Belt typeBelt width in mm × 10 (6.0mm)
�
�
�
We recommend Bando Bancollan Synchronous Belts are ideal for the following conditions.
For improved performance from the belt i.e. as a conveyor or print drive, special shapes or indications can be formed on the backside.High oil or ozone resistance.High shock load applications.
Dimensions
H2 H
1
P
W
θ
Type P W H1 H2 �
MXL�.0��mm(0.080")
0.76mm(0.0�0")
1.�mm(0.04�")
0.51mm(0.0�0")
40˚
XL5.08mm(0.�00")
1.�5mm(0.05�")
�.�5mm(0.089")
1.�5mm(0.049")
40˚
L9.5�5mm(0.�75")
�.�mm(0.1�6")
�.5mm(0.1�8")
1.9mm(0.075")
40˚
T�.5�.5mm
(0.098")1.0mm
(0.0�9")1.�mm(0.051")
0.7mm(0.0�8")
40˚
T55.0mm(0.197")
1.80mm(0.071")
�.�mm(0.087")
1.�mm(0.047")
40˚
T1010.0mm(0.�94")
�.5mm(0.1�8")
4.5mm(0.177")
�.5mm(0.098")
40˚
(XL,L)
140 XL - 0�5 UMaterial mark (polyurethane)Belt width 6.4mm (0.�5")Belt typePitch length in inches × 10 (14" × 10=140)
For XL type, Aramid cord (K) is available.
Dimensions
P
W
H2 H
1
Type P W H1 H2CordMark
S�M �.0mm 1.�mm 1.4mm 0.76mm G K
S�M �.0mm 1.95mm �.0mm 1.14mm G K
※Cord markG···Glass cordK···Aramid cord
�
�
�
SYNCHRONOUS BELTS (POLYURETHANE)
BANCOLLAN SYNCHRONOUS BELTS
��
SYNCHRONOUS BELTS (POLYURETHANE)
BANCOLLAN SYNCHRONOUS / STS BELTS
StandardSizes
BELTTYPE
P(mm)NOMINAL
WIDTHBELTNUMBER(PITCHLENGTHmm)
S�M (Polyurethene)
�.0 4 0 、6 0 、1 0 0 76、78、80、86、90、9�、100、10�、106、110、11�、114、116、1�0、1��、1�6、1�8、1�8、140、14�、144、148、158、160、164、166、168、170、17�、176、180、184、186、190、�00、�06、�14、�16、�18、��0、��4、��0、��4、��6、��8、�40、�50、�56、�58、�60、�64、�66、�80、�90、�96、�00、�14、�16、��0、��4、�40、�54、�60、�70、�80、�96、400、4�6、440、448、454、460、474、480、488、494、500、504、5�0、544、548、560、580、600、6�0、6�0、654、710、754、790、800、806、8�8、�900、976、�1000、���50
�Aramid Cordonly
S�M (Polyurethene)
�.0 6 0 、1 0 0 、1 5 0 1�0、144、150、159、16�、171、174、177、186、19�、195、�01、�04、�10、�1�、�19、���、��5、��4、��7、�40、�46、�5�、�55、�64、�67、�70、�76、�85、�00、�1�、�18、��7、��9、�4�、�54、�60、�78、�84、�90、�96、40�、405、417、4�0、4��、447、45�、459、486、501、504、507、51�、516、519、5�7、564、588、600、609、6��、660、666、681、699、750、765、774、789、804、810、885、900、9�6、951、1005、1050、1146、1�60、1�8�、1596、1800、�100
BELTTYPE
P(mm)NOMINAL
WIDTHBELTNUMBER(NOOFTEETH)
T�.5 (Polyurethene)
�.500 � 、5 、7 、10、1�
1�0、145、160、177.5、�00、��0、�45、�65、�85、�05、�17.5、��0、�80、4�0、480、49�.5、500、600、6�0、650、780、915、950
T5 (Polyurethene)
5.000 5 、1 0 、1 5 、 � 0 �5
165、185、�00、�15、��0、��5、�45、�50、�55、�60、�70、�75、�80、�95、�00、�05、��5、��0、�40、�50、�55、�65、�75、�90、400、410、4�0、4�5、450、455、465、475、480、500、510、5�5、545、550、560、575、600、610、6�0、6�0、640、650、660、675、690、695、700、7�0、750、780、800、815、840、850、900、940、990、1000、1075、1100、1140、1�15、1�80、1440
T10 (Polyurethene)
10.000 1 5 、 � 0 、 � 5 、 � 0 、5 0
�60、�70、400、410、440、450、500、5�0、560、610、6�0、660、690、700、7�0、750、780、810、840、880、890、900、9�0、960、970、980、1000、1010、1080、1110、1140、1150、1�10、1�40、1�50、1�00、1��0、1�50、1�90、1400、14�0、1440、1450、1460、1500、1560、1610、1750、1780、1880、1960、��50
MXL (Polyurethene)
�.0�� �.�、4.8、6.4、 9.5、1�.7
�0、�5、�7、40、41、4�、45、48、50、5�、5�、54、55、56、57、60、6�、65、6 7、6 8、7 0、71、7 �、7 �、7 5、7 6、7 9、8 0、81、8 �、8 �、8 5、8 7、8 8、90、91、94、95、97、98、100、10�、10�、106、110、11�、114、115、118、1�0、1��、1�5、1�6、1�8、1�0、1��、1�4、1�6、140、144、150、155、157、160、165、170、175、180、184、190、194、195、 �00、 �05、 �10、 �1�、 �15、��0、 ��5、 ��0、 ��6、�40、�50、�55、�60、�65、�70、�80、�95、�00、�05、�10、��0、��6、�40、�47、�50、�60、4�8、45�、468、579、660
BELTTYPE
P(mm)NOMINAL
WIDTHBELTNUMBER(PITCHLENGTHINCHES×10)
XL (Polyurethene)
5.080 0�5、0�1、0�7、 050、075
60、70、80、84、90、96、100、110、114、1�0、1�0、140、150、154、156、160、166、168、170、176、180、190、198、 �00、 �0�、 �10、 �1�、 ��0、 ��0、 ��6、�40、�50、�54、�60、�70、�90、�00、��0、��0、�76、�96、414、4�0、460、478、480、490、51�、564、6�0、670、686、7�0
L (Polyurethene)
9.5�5 050、075、100、 150、 �00
1�4、150、165、187、 �10、 ��5、 �40、 �55、 �70、 �85、�00、���、�45、�60、�67、�90、4�0、450、480、510、540、600
��
Bancollan Synchronous belts TN type is a highly precise, extra light-duty belt with a unique profile.
Features+Benefits
Complete synchronized transmissionLight drive systemCalm and smooth drive
Dimensions StandardWidth
P
R2.0
H2 H
1
Type P H1 H2
TN15 1.5 1.� 0.7
TN10 1.0 0.85 0.44
unit: mm
TN15
NominalWidth Width(mm)
�.0 5.0 7.0
10.0 1�.0
�.0 5.0 7.0
10.0 1�.0Sizemark
180 TN15 - 5.0 K CORD MARKNominal widthBelt typeNumber of teeth
※CORD MARKK=AramidW=Steel wireT=Polyester
(As for TN10, polyester cord is only available)
TN10
NominalWidth Width(mm)
1.0 �.0 �.0
1.0 �.0 �.0
TN10 Type
StandardSizes
BELTNUMBER
Pitchlength(mm)
numberofteeth
BELTNUMBER
Pitchlength(mm)
numberofteeth
BELTNUMBER
Pitchlength(mm)
numberofteeth
4�TN15 50TN15 60TN15 6�TN15
64.575.090.094.5
4�50606�
�70TN15�71TN15�90TN15�98TN15
405.0406.54�5.0447.0
�70�71�90�98
50TN1060TN1080TN1081TN1090TN10
50.060.080.081.090.0
5060808190
79TN158�TN15100TN15110TN15114TN151�0TN15
118.51��.0150.0165.0171.0180.0
798�1001101141�0
�00TN15�10TN15��0TN15��0TN15��4TN15
450.0465.0480.0495.0501.0
�00�10��0��0��4
98TN10100TN10107TN10110TN101�0TN10
98.0100.0107.0110.01�0.0
981001071101�0
1�0TN151�1TN15140TN15
195.0196.5�10.0
1�01�1140
��9TN15�40TN15�50TN15�60TN15�70TN15
508.5510.05�5.0540.0555.0
��9�40�50�60�70
1�0TN10140TN10150TN10160TN10170TN10
1�0.0140.0150.0160.0170.0
1�0140150160170
150TN15160TN15170TN15180TN15
��5.0�40.0�55.0�70.0
150160170180
�80TN15�90TN15400TN154�1TN15441TN15
570.0585.0600.06�1.5661.5
�80�904004�1441
�00TN10�50TN10�87TN10�10TN10
�00.0�50.0�87.0�10.0
�00�50�87�10
186TN15190TN1519�TN15196TN15�00TN15
�79.0�85.0�88.0�94.0�00.0
18619019�196�00
460TN15480TN15481TN158�8TN15
690.07�0.07�1.5
1�4�.0
4604804818�8
��0TN15��0TN15�40TN15�50TN15�60TN15
��0.0�45.0�60.0�75.0�90.0
��0��0�40�50�60
�
�
�
SYNCHRONOUS BELTS (POLYURETHANE)
BANCOLLAN SYNCHRONOUS BELTS IN-TYPE
TN15 Type
�4
V BELTS (RUBBER)
FRACTIONAL H.P. V-BELTS (FHP) AND MULTIPLE V BELTS
1
2
3
4
Construction
1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Chloroprene compression rubber
Features
FHP V-BELTS
Bando FHP V-Belts are built for maximum tension control, drive uniformity and long life, with minimum heat build-up and stretching on low horsepower elec-tricmotoros and gasoline engines. They are designed for high speed and short center distance.
MULTIPLE V-BELTS
For multiple drive, high speed and high torque drives on light or heavy industrial or automotive machinery. Bando Multiple V-Belts have exceptional length stability and drive uniformity. Rigorous testing has shown these Premium Quality Belts to have twice the service life and significantly greater transmission capacity than most other multiple V Belts.
Dimensions
a
θ b
Topwidtha Thicknessb Angle�
FHP
�L 10.0mm (0.�8") 5.5mm (0.��") 40˚
4L 1�.0mm (0.50") 8.0mm (0.�1") 40˚
5L 17.0mm (0.66") 9.0mm (0.�8") 40˚
Multiple
A 1�.7mm (0.50") 8.0mm (0.�1") 40˚
B 16.7mm (0.66") 10.7mm (0.41") 40˚
C ��.�mm (0.88") 1�.5mm (0.5�") 40˚
D ��.0mm (1.�5") �0.0mm (0.75") 40˚
E 40.0mm (1.50") �5.5mm (0.91") 40˚
�5
Sizemark�L 150
Multiply outside length in inches by 10 (15” × 10=150)
Belt type
A 50
Belt inside length in inches
Belt type
StandardSizes ※These sizes are in conformity to RMA.
Type Sizecode
�L150、 160、 170、 180、 190、 �00、 �10、 ��0、 ��0、 �40、 �50、 �60、 �70、 �80、 �90、 �00、�10、 ��0、 ��0、 �40、 �50、 �60、 �70、 �80、 �90、 400、 410、 4�0、 4�0、 440、 450、 460、470、 480、 490、 500、 510、 5�0、 5�0、 540、 550、 560、 570、 580、 590、 600、 610、 6�0
4L
170、 180、 190、 �00、 �10、 ��0、 ��0、 �40、 �50、 �60、 �70、 �80、 �90、 �00、 �10、 ��0、��0、 �40、 �50、 �60、 �70、 �80、 �90、 400、 410、 4�0、 4�0、 440、 450、 460、 470、 480、490、 500、 510、 5�0、 5�0、 540、 550、 560、 570、 580、 590、 600、 610、 6�0、 6�0、 640、650、 660、 670、 680、 690、 700、 710、 7�0、 7�0、 740、 750、 760、 770、 780、 790、 800、810、 8�0、 8�0、 840、 850、 860、 870、 880、 890、 900、 910、 9�0、 9�0、 940、 950、 960、970、 980、 990、 1000
5L
��0、 �40、 �50、 �60、 �70、 �80、 �90、 �00、 �10、 ��0、 ��0、 �40、 �50、 �60、 �70、 �80、�90、 400、 410、 4�0、 4�0、 440、 450、 460、 470、 480、 490、 500、 510、 5�0、 5�0、 540、550、 560、 570、 580、 590、 600、 610、 6�0、 6�0、 640、 650、 660、 670、 680、 690、 700、710、 7�0、 7�0、 740、 750、 760、 770、 780、 790、 800、 810、 8�0、 8�0、 840、 850、 860、870、 880、 890、 900、 910、 9�0、 9�0、 940、 950、 960、 970、 980、 990、 1000
A
�0、 �1、 ��、 ��、 �4、 �5、 �6、 �7、 �8、 �9、 �0、 �1、 ��、 ��、 �4、 �5、 �6、 �7、 �8、�9、 40、 41、 4�、 4�、 44、 45、 46、 47、 48、 49、 50、 51、 5�、 5�、 54、 55、 56、 57、58、 59、 60、 61、 6�、 6�、 64、 65、 66、 67、 68、 69、 70、 71、 7�、 7�、 74、 75、 76、77、 78、 79、 80、 81、 8�、 8�、 84、 85、 86、 87、 88、 89、 90、 91、 9�、 9�、 94、 95、96、 97、 98、 105、 110、 11�、 1�0、 1�8、 1�6、 144、 158、 17�、 180
B
�5、 �6、 �7、 �8、 �9、 �0、 �1、 ��、 ��、 �4、 �5、 �6、 �7、 �8、 �9、 40、 41、 4�、 4�、44、 45、 46、 47、 48、 49、 50、 51、 5�、 5�、 54、 55、 56、 57、 58、 59、 60、 61、 6�、6�、 64、 65、 66、 67、 68、 69、 70、 71、 7�、 7�、 74、 75、 76、 77、 78、 79、 80、 81、8�、 8�、 84、 85、 86、 87、 88、 89、 90、 91、 9�、 9�、 94、 95、 96、 97、 100、 101、 10�、105、 108、 111、 11�、 1�0、 1�4、 1�8、 1��、 1�6、 144、 158、 16�、 17�、 180、 195、 �10、 ��5、 �40、 �55、�70、 �85、 �00、 �15
C51、 60、 68、 75、 81、 85、 90、 96、 105、 109、 11�、 115、 1�0、 1�8、 1�6、 144、 150、 158、 16�、17�、 180、 195、 �10、 ��5、 �40、 �55、 �70、 �85、 �00、 �15、 ��0、 �45、 �60、 �90、 4�0、 450、 480
D1�0、 1�8、 144、 158、 16�、 17�、 180、 195、 �10、 ��5、 �40、 �55、 �70、 �85、 �00、 �15、 ��0、�45、 �60、 �90、 4�0、 450、 480、 540、 600
E 180、 195、 �10、 �40、 �70、 �00、 ��0、 �60、 �90、 4�0、 480、 540、 600
V BELTS (RUBBER)
FRACTIONAL H.P.V-BELTS (FHP) AND MULTIPLE V BELTS
�6
V BELTS (RUBBER)
AGRICULTURAL V BELTS RED S �
1 2 3 4
Construction
1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Chloroprene compression rubber
Features+Benefits
Designed specifically for reverse-bend dr ive by positioning tensile members closer to the neutral axis and by making the belt thickness a little thinner than that of Conventional Multiple V-Belts A, B, & C Sections.Particularly suitable to agricultural machinery such as combine harvester and garden tiller where belts are often driven with backside idler.
Dimensions
θ θ
b
a
b
a
Type Topwidtha Thicknessb Angle�
SA 1�.7mm (0.5") 7.0mm (0.�7") 40˚SB 16.7mm (0.67") 9.0mm (0.�5") 40˚SC ��.�mm (0.87") 11.0mm (0.4�") 40˚
�
�
ServiceLifeComparison
SpecificDrivingConditions Red-S MultipleV-Belt
reverse-bend drive 450 100oil contamination �80 100
ambient temperature 70°C Degrees
450 100
Numerical values shown above represent indexes with taking the multiple V belts as 100
Sizemark
SA 50
Belt pitch length in inches
Belt type
StandardSizes
Belttype
a×b(mm)
Beltpitchlengthininches
SA 1�.7×7.0 �0 �1 �� �� �4 �5 �6 �7 �8 �9 �0 �1 �� �� �4 �5 �6 �7 �8 �9 40 41 4� 4� 44 45 46 47 48 49 50 51 5� 5� 54 55 56 57 58 59 60 61 6� 6� 64 65 66 67 68 69 70 71 7� 7� 74 75 76 77 78 79 80 81 8� 8� 84 85 86 87 88 89 90 91 9� 9� 94 95 96 97 98 99100 10� 105 108 110 11� 115 118 1�0 1�� 1�5 1�8 1�0 1�5 140 145150 155 160 165 170 180 �00 �05 �10 ��0 ��5 ��0 ��5 �40 �50
SB 16.7×9.0 �� �5 �6 �7 �9 �0 �1 �� �� �4 �5 �6 �7 �8 �9 40 41 4� 4� 44 45 46 47 48 49 50 51 5� 5� 54 55 56 57 58 59 60 61 6� 6� 64 65 66 67 68 69 70 71 7� 7� 74 75 76 77 78 79 80 81 8� 8� 84 85 86 87 88 89 90 91 9� 9� 94 95 96 97 98 99 100 10� 105 108 11011� 115 118 1�0 1�� 1�5 1�8 1�0 1�� 1�5 1�8 140 145 150 155 160165 170 180 190 �00 �10
SC ��.�×11.0 �5 �9 40 4� 44 45 46 47 48 49 50 51 5� 5� 54 55 56 57 58 59 60 6� 6� 64 65 66 67 68 69 70 7� 7� 74 75 76 77 78 79 80 81 8� 85 86 87 88 89 90 94 95 96 99 100 10� 105 108 110 11� 115 118 1�0 1�� 1�5 1�8 1�01�4 1�7 1�9 140 145 150 167 175
Outside length
Pitch length
Inside length
�7
1 2 3 4
5
Construction
1: Rubber impregnated canvas�: Aramid tensile members�: Chloroprene insularion rubber4: Fiber loaded chloroprence rubber5: Chloroprene compression rubber
Features+Benefits
The Series W800 has heat and flex resistance superior to any other V belts, which makes it a top-end V belt for the agricultural machinery use enabling high-load power transmission. You can be assured to use this V belt under harsh environments.
Dimensions
θ θ
b
a
b
a
Type Topwidtha Thicknessb Angle�
SA 1�.7mm (0.5") 7.0mm (0.�7") 40˚SB 16.7mm (0.67") 9.0mm (0.�5") 40˚SC ��.�mm (0.87") 11.0mm (0.4�") 40˚
Sizemark
SA 50
Belt pitch length in inches
Belt type
StandardSizes
Belttype a×b(mm) Beltpitchlengthininches
SA1�.7
× 7.0
�7,�8,�9,�0,�1,��,��,�4,�5,�6,�7,�8,�9,40,41, 4�,4�,44,45,46,47,48,49,50,51,5�,5�,54,55,56, 57,58,59,60,61,6�,6�,64,65,66,67,68,69,70,71, 7�,7�,74,75,76,77,78,79,80,81,8�,8�,84,85,86, 87,88,89,90,91,9�,9�,94,95,96,97,98,99,100
SB16.7
× 9.0
�7,�8,�9,�0,�1,��,��,�4,�5,�6,�7,�8,�9,40,41, 4�,4�,44,45,46,47,48,49,50,51,5�,5�,54,55,56, 57,58,59,60,61,6�,6�,64,65,66,67,68,69,70,71, 7�,7�,74,75,76,77,78,79,80,81,8�,8�,84,85,86, 87,88,89,90,91,9�,9�,94,95,96,97,98,99,100,10�,105,108,110,11�,115,118,1�0,1��,1�5,1�8,1�0,1��,1�5,1�8,140,145,150,155,160,165,170,180,190,�00
SC��.7
× 11.0
(40),(4�),(44),(45),(46),(47),48,(49),50,51,5�, 5�,54,55,56,57,58,59,60,6�,6�,64,65,66,67,68, 69,70,7�,7�,74,75,76,77,78,79,80,81,8�,85,86, 87,88,89,90,94,95,96,99,100,10�,105,108,110, 11�,115,118,1�0,1��,1�5,1�8,1�0,1��,1�5,1�8, 140,14�,145,148,150,155,160,165,170,180,190, �00
Making full use of the capabilities of agriculturalmachineryAs the agricultural machinery increasingly enhances its performance and functions, the quality required for V belts used in the agricultural machinery is going upscale.On fine quality market, there are cases where the agricultural machinery should use more than the RED-S� in order to deliver the thorough functions. Now, we at BANDO launch the Series W800 of the highest quality among V belts (Series W) for the agricultural machinery use on the fine quality market.
FeaturesComparison
StandardVbelt RED-S� W800
Power transmission capability
100 150 �00
Service life against reverse bending
100 450 1800
Service life against shock
100 150 450
※Numerical values shown above represent indexes when taking the standard V belt as 100.
V BELTS (RUBBER)
AGRICULTURAL V BELTS W800
�8
V BELTS (RUBBER)
DOUBLE (HEXAGONAL) V-BELTS
1 � 4�
Construction
1: Rubber impregnated special woven canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Chloroprene compression rubber
Features+Benefits
Designed for reverse-bend serpentine drives by covering the belt with special woven fabric.New Cross Section for maintaining proper belt position in pulley groove even in the case of extreme reverse-bend drives.Due to greater flexibility created by the special woven fabric as well as to the New Cross Section, service life has increased by about 40% over that of traditional double V-Belts.
Dimensions
aa
bb
θ θ
Effectivepitch line
Type a(mm) b(mm) �
AA 1�.5 10.�
40˚BB 16.5 1�.5
CC ��.0 18.0
�
�
�
Sizemark
BB 100
Effective pitch length in inches
Belt type
Typical reverse-bend serpentine drive
StandardSizes
Type Sizenumber(Effectivepitchlengthininches)
AA 50 5� 56 60 6� 67 71 75 80 85 90 95 100106 11� 118 1�5 1�� 140
BB 60 6� 67 71 75 80 85 90 95 100 106 11� 1181�5 1�� 140 150 160 170 180 190 �00 �1� ��4 ��6 �50
CC 1�� 140 150 160 170 180 190 �00 �1� ��4 ��6 �50 �65�80 �00
※These sizes are in conformity to JIS
New cross section
Conventional cross section
�9
45
2
3
1
Construction
1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Special lateral reinforcing cord5: Chloroprene compression rubber
Features
High horsepower ratingRequires about 1/� of the space needed by traditional Multiple V Belt drive.Long lifeHigh heat and oil resistanceLength stability. A matched set of Bando Power Ace for multiple belt drives retains superior uniformity under tension. A Bando matched set remains perfectly matched even after long periods of storage.Power Ace raised crookedness nature by making texture of canvas into 1�0 degrees instead of 90 degrees of conventional V-belt.
Power Ace Outer Jacket.
Conventional V-belt Outer Jacket.
�
�
�
�
�
Dimensions
θ
b
a
Type Topwidtha Thicknessb Angle�
�V 9.5mm (0.�8") 8.0mm (0.��") 40˚5V 16.0mm (0.6�") 1�.5mm (0.54") 40˚8V �5.5mm (1.0") ��.0mm (0.88") 40˚
Sizemark
5V 1�50
Effective outside length in inches × 10 (1�5” × 10=1�50) (�.175m)
Belt type
Pulley
Use RMA Engineering Standards recommended pulley groove dimensions,
IP-�� (Specifications for Drives Using Narrow Multiple V-BELTS).
V BELTS (RUBBER)
POWER ACE
3V 5V 8V
A B C D Em
m0.8(
″23.0)
mm5 .31
″45. 0()
mm0. 32
″88 .0(
) 9.5mm(0.38″) 16.0mm(0.62″) 25.5mm(1.0″)
38.0mm(1.50″) 31.7mm(1.25″) 22.2mm(0.88″)16.7mm(0.66″) 12.7mm(0.50″)
mm0.32
″1 9.0()
mm0 .91
″5 7.0()
mm5.31
″35.0()
mm3.01
(″14.0)
mm0.8
(″13.0)
�0
V BELTS (RUBBER)
POWER ACEThe superior power transmission capacity of the Bando narrow Power Ace® V-belts allows for drive designs with smaller components reducing machine space and cost. The higher efficiency of the Power Ace® V-belts will also result in decreased operating costs.Just three types of Bando Power Ace ideally cover all five sections of multiple V-belts. For multiple or single dr ives, the �V replaces A, and B sections; the 5V replaces C and D sections; and the 8Vreplaces D and E sections.
StandardSizes ※These sizes are in conformity to RMA.
BeltnumberEffectiveoutsidelength
BeltnumberEffectiveoutsidelength
BeltnumberEffectiveoutsidelength
mm inch mm inch mm inch
3V2503V2653V2803V3003V3153V3353V3553V3753V4003V4253V450
6�567�71176�80085190�95�
10161080114�
�5.0�6.5�8.0�0.0�1.5��.5�5.5�7.540.04�.545.0
3V4753V5003V5303V5603V6003V6303V6703V7103V7503V8003V850
1�071�701�4614��15�41600170�180�1905�0���159
47.550.05�.056.060.06�.067.071.075.080.085.0
3V9003V9503V10003V10603V11203V11803V12503V13203V1400
��86�41��540�69��845�997�175��5��556
90.095.0
100.0106.011�.0118.01�5.01��.0140.0
5V5005V5305V5605V6005V6305V6705V7105V7505V8005V8505V9005V950
1�701�4614��15�41600170�180�1905�0���159��86�41�
50.05�.056.060.06�.067.071.075.080.085.090.095.0
5V10005V10605V11205V11805V12505V13205V14005V15005V16005V17005V18005V1900
�540�69��845�997�175��5��556�81040644�18457�48�6
100.0106.011�.0118.01�5.01��.0140.0150.0160.0170.0180.0190.0
5V20005V21205V22405V23605V25005V26505V28005V28005V30005V31505V3550
50805�85569059946�5067�1711�76�0800185099017
�00.0�1�.0��4.0��6.0�50.0�65.0�80.0�00.0�15.0��5.0�55.0
8V10008V10608V11208V11808V12508V13208V14008V15008V16008V1700
�540�69��845�997�175��5��556�81040644�18
100.0106.011�.0118.01�5.01��.0140.0150.0160.0170.0
8V18008V19008V20008V21208V22408V23608V25008V26508V28008V3000
457�48�650805�85569059946�5067�1711�76�0
180.0190.0�00.0�1�.0��4.0��6.0�50.0�65.0�80.0�00.0
8V31508V33508V35508V37508V40008V42508V45008V47508V50008V5600
80018509901795�5
1016010795114�01�0651�70014��4
�15.0��5.0�55.0�75.0400.04�5.0450.0475.0500.0560.0
�1
45
2
3
1
Construction
1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Special lateral reinforcing cord5: Chloroprene compression rubber
Features
High horsepower ratingRequires about 1/� of the space needed by traditional Multiple V Belt drive.Long lifeHigh heat and oil resistanceLength stability. A matched set of Bando Narrow V-Belts for multiple belt drives retains superior uniformity under tension. A Bando matched set remains perfectly matched even after long periods of storage.Compared with Conventional V-belt. Bando Narrow V Belts are thick and realized high load.
StandardSizes
BeltnumberEffectiveinsidelength
BeltnumberEffectiveinsidelength
BeltnumberEffectiveinsidelength
mm mm mm
SPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZ
6�0670710760800850900950
1010108011401�001�701�4014�015�01600170018001900�0�0
SPASPASPASPASPASPASPASPASPASPASPASPASPASPASPASPASPASPASPA
7077��80085090095095798�
1000106011�011801�501��014001500160017001800
SPBSPBSPBSPBSPBSPBSPBSPBSPBSPBSPBSPB
1�601�40141015101590169018001900�0�0�150��80�410
�
�
�
�
�
Dimensions
θ
b
a
Type Topwidtha Thicknessb Angle�
SPZ 9.5 8.0mm 40˚SPA 1�.5mm 10.0mm 40˚SPB 16.0mm 1�.5mm 40˚SPC �0.0mm 18.0mm 40˚
Sizemark
5V 1�50
Effective outside length in inches multiplied by 10. (1�5” × 10=1�50) (�.175m)
Belt type
Pulley
Use RMA Engineering Standards recommended pulley groove dimensions,
IP-�� (Specifications for Drives Using Narrow Multiple V-BELTS).
V BELTS (RUBBER)
NARROW V BELTS SP-TYPE
��
V BELTS (RUBBER)
VARIABLE SPEED BELTS
1 3 2 4 5
Construction
1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Chloroprene compression rubber5: Rubber impregnated canvas
Features+Benefits
FlexibilityCog pattern gives greater flexibility resulting in efficient heat dissipation.High power transmission capacityStrong tensile members and transverse modulus provide high horsepower rating.High heat and oil resistance.Wide range of speed ratios.
(1)StandardSizes
Standard belt profiles are shown in Fig.1 and sizes are listed in Fig.�
Dimensions
α
a
b
Sizemark
850 VA
Belt type
Nominal number (Pitch length in mm)
�
�
�
�
Fig.1StandardProfiles
Type VA VB VC VD VE
Thickness (b mm) 8.5 10 11.5 1�.5 16Top width (a mm) �5 �1 41 5� 66
Pulley Groove Angle (�˚) �0~�4
Fig.2StandardSizes
NominalNo.
VA VB VC VD VENominal
No.VA VB VC VD VE
560 � 1000 � � � �600 � 10�0 � �615 � 1060 � � � �6�0 � � 1090 � � �650 � � 11�0 � � � � �670 � � 1150 � � �690 � � 1180 � � � � �710 � � � 1��0 � � �7�0 � � � 1�50 � � � �750 � � � 1�80 � � �775 � � � 1��0 � � �800 � � � � 1�60 � � �8�5 � � � � 1400 � � �850 � � � � 1450 � � �875 � � � 1500 � � �900 � � � � 1550 � � �9�5 � � � 1600 � � �950 � � � � 1700 � �975 � � � 1800 � �
(2)Semi-StandardSizes
Semi-standard profiles are available within the range of top width and pulley groove angles shown in Fig.�. Belt lengths are as per Fig.�
Dimensions
α
a
b
Sizemark
850 VA �� ��
Pulley groove angleBelt top width (mm)Belt typeNominal number (Pitch length in mm)
Fig.3Semi-StandardProfiles
Type VA VB VC VD VE
Thickness (b mm) 8.5 10 11.5 1�.5 16Top width (a mm) 16~�� �0~�8 �4~45 �0~54 �7~67
Pulley Groove Angle � ��~�8
��
V COGGED BELTS (VC)
2
1
Construction
1: Polyester tensile members�: Polyurethane compression section.
Features
Space saving: Pulleys as small as 0.6" OD can be used.Clean operation: No "black rubber dust" problem.High oil resistance.
Dimensions
a
θ b
Type Topwidtha Thicknessb Angle�
VC�L 6.5mm (0.�5") 4.0mm (0.16") 40˚6 6.0mm (0.�4") 4.0mm (0.16") 40˚
DC 6 6.0mm (0.�4") 4.0mm (0.16") 40˚
StandardSizes
Type BeltnumberOutsidelength
BeltnumberOutsidelength
BeltnumberOutsidelength
BeltnumberOutsidelength
mm inch mm inch mm inch mm inch
VC2L
2L0802L0902L1002L1102L120
�0�.���8.6�54.0�79.4�04.8
8.09.0
10.011.01�.0
2L1302L1402L1502L1602L170
��0.��55.6�81.0406.44�1.8
1�.014.015.016.017.0
2L1802L1902L2002L2202L240
457.�48�.6508.0558.8609.6
18.019.0�0.0��.0�4.0
2L2602L2802L3002L340
660.4711.�76�.086�.6
�6.0�8.0�0.0�4.0
VC6
VC6X207VC6X220VC6X232VC6X250VC6X260VC6X261VC6X280VC6X289VC6X297VC6X300VC6X315VC6X320VC6X330VC6X340VC6X343VC6X345
�07.0��0.0���.0�50.0�60.0�61.0�80.0�89.0�97.0�00.0�15.0��0.0��0.0�40.0�4�.0�45.0
8.18.79.19.8
10.�10.�11.011.411.711.81�.41�.61�.01�.41�.51�.6
VC6X349VC6X350VC6X360VC6X370VC6X380VC6X381VC6X390VC6X400VC6X407VC6X410VC6X414VC6X420VC6X430VC6X432VC6X440VC6X444
�49.0�50.0�60.0�70.0�80.0�81.0�90.0400.0407.0410.0414.04�0.04�0.04��.0440.0444.0
1�.71�.814.�14.614.9615.015.415.716.016.116.�16.516.917.017.�17.5
VC6X450VC6X460VC6X466VC6X470VC6X480VC6X485VC6X490VC6X500VC6X511VC6X520VC6X530VC6X540VC6X550VC6X561VC6X587VC6X600
450.0460.0466.0470.0480.0485.0490.0500.0511.05�0.05�0.0540.0550.0561.0587.0600.0
17.718.118.�18.518.919.119.�19.7�0.1�0.5�0.9�1.��1.7��.1��.1��.6
VC6X613VC6X628VC6X650VC6X663VC6X700VC6X713VC6X730VC6X750VC6X760VC6X764VC6X800VC6X821VC6X850VC6X866
61�.06�8.0650.066�.0700.071�.07�0.0750.0760.0764.0800.08�1.0850.0866.0
�4.1�4.7�5.6�6.1�7.6�8.1�8.7�9.5�9.9�1.1�1.5��.���.5�4.1
DC6
DC6X200DC6X210DC6X230DC6X240DC6X250DC6X260DC6X270
�00.0�10.0��0.0�40.0�50.0�60.0�70.0
7.98.�9.19.49.8
10.�10.6
DC6X277DC6X280DC6X290DC6X300DC6X310DC6X315DC6X320
�77.0�80.0�90.0�00.0�10.0�15.0��0.0
10.911.011.411.81�.�1�.41�.6
DC6X330DC6X340DC6X345DC6X350DC6X360DC6X365DC6X370
��0.0�40.0�45.0�50.0�60.0�65.0�70.0
1�.01�.41�.61�.814.�14.414.6
VC6X380VC6X390VC6X400VC6X450VC6X500VC6X540
�80.0�90.0400.0450.0500.0540.0
15.015.415.717.719.7�1.�
�
�
�
DOUBLE COGGED V BELTS (DC)
2
1
Sizemark
(VC2Ltypes)
�L 080
Outside length in inches Multiplied by 10 (8×10=080)
�L type cogged V belts
(VC-6type)
VC 6x �50
Outside length in mm
6 type
Cogged V belts
(DC-6type)
DC 6x �50
Outside length in mm
6 type
Double cogged V belts
V BELTS (POLYURETHANE)
BANCOLLAN V BELTS
�4
V BELTS (POLYURETHANE)
BANFLEX
3
2
1
Construction
1: Polyurethane�: Polyester tensile members�: Polyurethane compression section.
Sizemark
5M 1000
Effective outside length in mm
Belt type
StandardSizes
Effectiveoutsidelength Type Effectiveoutsidelength Type Effectiveoutsidelength Type
mm inch 3M 5M 7M 11M mm inch 3M 5M 7M 11M mm inch 3M 5M 7M 11M180 7.1 � 4�7 17.� � � 10�0 40.6 � � �
185 7.� � 450 17.7 � � 1060 41.7 � � �
190 7.5 � 46� 18.� � � 1090 4�.9 � � �
195 7.7 � 475 18.7 � � 11�0 44.1 � � �
�00 7.9 � 487 19.� � � 1150 45.� � � �
�06 8.1 � 500 19.7 � � � 1180 46.5 � � �
�1� 8.� � 515 �0.� � � � 1��0 48.0 � � �
�18 8.6 � 518 �0.4 � 1�50 49.� � � �
��4 8.8 � 5�0 �0.9 � � � 1�80 50.4 � � �
��0 9.1 � 545 �1.5 � � � 1��0 5�.0 � � �
��6 9.� � 560 ��.0 � � � 1�60 5�.5 � � �
�4� 9.6 � 580 ��.8 � � � 1400 55.1 � � �
�50 9.8 � 600 ��.6 � � � 1450 57.1 � � �
�58 10.� � 615 �4.� � � � 1500 59.1 � � �
�65 10.4 � 6�0 �4.8 � � � 1550 61.0 � �
�7� 10.7 � 650 �5.6 � � � 1600 6�.0 � �
�80 11.0 � � 670 �6.4 � � � 1650 65.0 � �
�90 11.4 � � 690 �7.� � � � 1700 66.9 � �
�00 11.8 � � 710 �8.0 � � � � 1750 68.9 � �
�07 1�.1 � � 7�0 �8.7 � � � � 1800 70.9 � �
�15 1�.4 � � 750 �9.5 � � � � 1850 7�.8 � � �
��5 1�.8 � � 775 �0.5 � � � 1900 74.8 � �
��5 1�.� � � 800 �1.5 � � � 1950 76.8 � �
�45 1�.6 � � 8�5 ��.5 � � � �000 78.7 � �
�55 14.0 � � 850 ��.5 � � � �060 81.1 � �
�65 14.4 � � 875 �4.4 � � � �1�0 8�.5 � �
�75 14.8 � � 900 �5.4 � � � �180 85.8 � �
�87 15.� � � 9�5 �6.4 � � � ��40 88.� � �
400 15.7 � � 950 �7.4 � � � ��00 90.6 � �
41� 16.� � � 975 �8.4 � � �
4�5 16.7 � � 1000 �9.4 � � �
Features+Benefits
Space savingHigh horsepower rating and small pulley requirements permit compact designs.Smooth runningBelt runs very smoothly because of ground side wall.High speed driveBecause they are very light weight, Banflex belts can be driven at high speeds without excessive vibration or wear.
Dimensions
a
b
Type Topwidtha Thicknessb
�M �.0mm (0.1�") �.1mm (0.08")5M 5.0mm (0.�0") �.�mm (0.1�")7M 7.0mm (0.�8") 5.�mm (0.�0")11M 11.0mm (0.4�") 6.9mm (0.�8")
�
�
�
�5
1
3 42
Construction
1: Polyurethane�: Tie band�: Polyester tensile members4: Polyurethane compression section
Features+Benefits
Smooth high speed drive up to 1�,000 feet/min.Low vibration without spin or jump off.Space savingSmall pulleys and high speed ratios make it possible to design compact and lightweight machines.Ideal for horizontal drive.High oil and ozone resistance.
StandardSizes
Outsidelength Type Outsidelength Type Outsidelength Type
mm inch 5MS 7MS 11MS mm inch 5MS 7MS 11MS mm inch 5MS 7MS 11MS�80 11.0 � 580 ��.8 � � 1180 46.5 � � �
�90 11.4 � 600 ��.6 � � 1��0 48.0 � � �
�00 11.8 � 615 �4.� � � 1�50 49.� � � �
�07 1�.1 � 6�0 �4.8 � � 1�80 50.4 � � �
�15 1�.4 � 650 �5.6 � � 1��0 5�.0 � � �
��5 1�.8 � 670 �6.4 � � 1�60 5�.5 � � �
��5 1�.� � 690 �7.� � � 1400 55.1 � � �
�45 1�.6 � 710 �8.0 � � � 1450 57.1 � � �
�55 14.0 � 7�0 �8.7 � � � 1500 59.1 � � �
�65 14.4 � 750 �9.5 � � � 1550 61.0 � �
�75 14.8 � 775 �0.5 � � � 1600 6�.0 � �
�87 15.� � 800 �1.5 � � � 1650 65.0 � �
400 15.7 � 8�5 ��.5 � � � 1700 66.9 � �
41� 16.� � 850 ��.5 � � � 1750 68.9 � �
4�5 16.7 � 875 �4.4 � � � 1800 70.9 � �
4�7 17.� � 900 �5.4 � � � 1850 7�.8 � � �
450 17.7 � 9�5 �6.4 � � � 1900 74.8 � �
46� 18.� � 950 �7.4 � � � 1950 76.8 � �
475 18.7 � 975 �8.4 � � � �000 78.7 � �
487 19.� � 1000 �9.4 � � � �060 81.1 � �
500 19.7 � � 10�0 40.6 � � � �1�0 8�.5 � �
515 �0.� � � 1060 41.7 � � � �180 85.8 � �
5�0 �0.9 � 1090 4�.9 � � � ��40 88.� � �
545 �1.5 � � 11�0 44.1 � � � ��00 90.6 � �
560 ��.0 � � 1150 45.� � � �
�
�
�
�
�
Dimensions
a
p
θ b
TypeTopwidtha Thicknessb
PitchPmm inch mm inch
5MS� ribs 9.8 0.�9
�.� 0.1�5.�mm (0.�1")� ribs 15.1 0.59
7MS� ribs 15.6 0.61
5.� 0.�18.5mm (0.��")� ribs �4.1 0.95
11MS� ribs �4.4 0.96
7.0 0.�81�.�mm (0.5�")� ribs �7.6 1.48
Sizemark
7 - 5MS 800
Outside length in mm
Belt type
Number of ribs
※More than 4 ribs, we combinate � or � ribs belts as following.
NumberofribsStandard
combinationNumberofribs
Standardcombination
4 �+� 8 �+�+�5 �+� 9 �+�+�6 �+� 10 �+�+�+�7 �+�+� 1� �+�+�+�
BANDED BELTS (POLYURETHANE)
BANFLEX SCRUM
�6
BANDED BELTS (RUBBER)
POWER SCRUM
1 2 3 4 5
Multiple V Belt type
Construction
1: Tie-band�: Polyester tensile members�: Chloroprene insulation rubber4: Rubber impregnated canvas5: Chloroprene compression rubber.
Features+Benefits
Permanent matched set.No lateral whip, spin or turn over.Deep pulley grooves are not required even on horizontal drives.Heat and oil resistant.
Sizemark
(MultipleVtype)
5 C 100
Belt pitch length in inches
Type
Number of belts in band
(PowerAcetype)
5 - �V 1000
Outside length in inches × 10
(100" × 10=1000)
Type
Number of belts in band
�
�
�
�
4 531 2
Power Ace type
Dimensions
a e
b
θ
TypeTopwidthof
onebeltaThicknessb Angle�
Pitchbetweentwobeltse
A 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")B 17.0mm (0.66") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")C 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")D 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")�V 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")5V 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")8V 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")
※More than 6 ribs, we combinate �, �, 4 or 5 ribs belts as following.
Numberofribs Standardcombination
Numberofribs Standardcombination
- - 11 4+�+4� � 1� 4+4+4� � 1� 4+5+44 4 14 5+4+55 5 15 5+5+56 �+� 16 4+4+4+47 �+4 17 4+4+5+48 4+4 18 5+4+4+59 4+5 19 5+4+5+510 5+5 �0 5+5+5+5
�7
StandardSizes
Power Ace
Type BeltnumberOutsidelength
BeltnumberOutsidelength
BeltnumberOutsidelength
mm inch mm inch mm inch
3V
�V 400�V 4�5�V 450�V 475�V 500�V 5�0�V 560�V 600
1,0161,0801,14�1,�071,�701,�461,4��1,5�5
40.04�.545.047.550.05�.056.060.0
�V 6�0�V 670�V 710�V 750�V 800�V 850�V 900�V 950
1,6001,70�1,80�1,905�,0���,159�,�86�,41�
6�.067.071.075.080.085.090.095.0
�V1000�V1060�V11�0�V1180�V1�50�V1��0�V1400
�,540�,69��,845�,997�,175�,�5��,556
100.0106.011�.0118.01�5.01��.0140.0
5V
5V 6005V 6�05V 6705V 7105V 7505V 8005V 8505V 9005V 9505V10005V1060
1,5�41,6001,70�1,80�1,905�,0���,159�,�86�,41��,540�,69�
60.06�.067.071.075.080.085.090.095.0
100.0106.0
5V11�05V11805V1�505V1��05V14005V15005V16005V17005V18005V19005V�000
�,845�,997�,175�,�5��,556�,8104,0644,�184,57�4,8�65,080
11�.0118.01�5.01��.0140.0150.0160.0170.0180.0190.0�00.0
5V�1�05V��405V��605V�5005V�6505V�8005V�0005V�1505V��505V�550
5,�855,6905,9946,�506,7�17,11�7,6�08,0018,5099,017
�1�.0��4.0��6.0�50.0�65.0�80.0�00.0�15.0��5.0�55.0
8V
8V10008V10608V11�08V11808V1�508V1��08V14008V15008V16008V1700
�,540�,69��,845�,997�,175�,�5��,556�,8104,0644,�18
100.0106.011�.0118.01�5.01��.0140.0150.0160.0170.0
8V18008V19008V�0008V�1�08V��408V��608V�5008V�6508V�8008V�000
4,57�4,8�65,0805,�855,6905,9946,�506,7�17,11�7,6�0
180.0190.0�00.0�1�.0��4.0��6.0�50.0�65.0�80.0�00.0
8V�1508V��508V�5508V�7508V40008V4�508V45008V47508V50008V5600
8,0018,5099,0179,5�5
10,16010,79511,4�01�,0651�,70014,��4
�15.0��5.0�55.0�75.0400.04�5.0450.0475.0500.0560.0
V Belt type
TypeMinimumeffective
pitchlengthMaximumeffective
pitchlength
mm inch mm inchA 1,5�4 60 5,080 �00B 1,5�4 60 8,890 �50C �,540 100 8,890 �50D �,540 100 8,890 �50
※These sizes are in conformity to JIS.
Recommended Pulley Groove Pitch
P
TypePulleypitchP
mm inch
A 15.0 0.59B 19.0 0.75C �5.5 1.00D �7.0 1.46
TypePulleypitchP
mm inch
�V 10.� 0.415V 17.5 0.698V �8.6 1.1�
BANDED V BELTS (RUBBER)
POWER SCRUM
�8
V RIBBED BELTS (RUBBER)
POLYBANROPE
1 2 3 4
Construction
1: Chloroprene backside rubber�: Polyester tensile members�: Chloroprene compression rubber4: Rubber impregnated canvas (except J Type)
Features+Benefits
High horsepower rating.BANDO POLYBANROPE have a �0-50% higher HP rating than multiple V belts.Space savingPulleys with outside diameters as small as 0.8" can be used. (Type J)Lower vibration than flat belts.Comparable to flat belts.Oil and heat resistant.
StandardSizes
Type beltnumberEffectivelength
beltnumberEffectivelength
beltnumberEffectivelength
mm inch mm inch mm inch
J
108J117J1��J140J159J180J190J199J�10J��0J��4J��5J�40J
�74.��97.���5.��55.640�.9457.�48�.6505.55��.4558.8569.0596.9609.0
10.811.71�.�14.015.918.019.019.9�1.0��.0��.4��.5�4.0
�45J�51J�60J�78J�80J�00J�07J�15J���J��0J��7J�40J�50J
6��.�6�7.5660.4706.1711.�76�.0779.8800.18�0.48�8.�856.086�.6889.0
�4.5�5.1�6.0�7.8�8.0�0.0�0.7�1.5��.���.0��.7�4.0�5.0
�60J�70J�80J�90J400J4�0J450J460J470J474J490J5�0J5�0J
114.49�9.8965.�990.0
1016.0109�.�114�.01168.4119�.81�04.01�44.61��0.81�46.�
�6.0�7.0�8.0�9.040.04�.045.046.047.047.449.05�.05�.0
L
�14L�41L�60L�77L�90L��7L��7L�44L�47L�48L�58L�6�L�76L�86L�95L
54�.661�.1660.470�.67�6.68�0.6856.087�.8881.488�.9909.�919.5955.0980.4
100�.�
�1.4�4.1�6.0�7.7�9.0��.7��.7�4.4�4.7�4.8�5.8�6.��7.6�8.6�9.5
410L415L417L4��L470L490L515L5�0L540L570L600L615L650L680L690L
1041.41054.11059.�1074.4119�.81�44.61�08.11�46.�1�71.61447.815�4.0156�.11651.017�7.�175�.6
41.041.541.74�.�47.049.051.55�.054.057.060.061.565.068.069.0
7�0L750L780L815L8�5L865L9��L975L1016L106�L11�0L1�00L1480L
1854.�1905.01981.��070.1�1�0.9�197.1��67.��476.5�580.6�700.0�844.8�048.0�759.�
7�.075.078.081.58�.586.59�.�97.5
101.6106.�11�.01�0.0148.0
M
417M557M6�0M65�M756M
1059.�1414.81600.�1656.119�0.�
41.755.76�.065.�75.6
851M878M990M
1150M1��0M
�161.5���0.1�514.6�9�1.0�1�4.�
85.187.899.0
115.01��.0
1�10M1470M1900M
���7.4�7��.848�6.0
1�1.0147.0190.0
�
�
�
�
Dimensions
P
b
θ
TypeThicknessb
Angle�Pitch(p)
mm inch mm inchJ 4.0 0.16 40˚ �.4 0.09�L 9.0 0.�4 40˚ 4.8 0.185M 16.5 0.65 40˚ 9.6 0.�70
Sizemark
410 L 5
Number of ribs
Type
Effective pitch length in inches × 10 (41" × 10=410)
�9
1 2 3
Construction
1: Polyurethane�: Polyamid tensile members�: Polyurethane
Features+Benefits
Suitable to fixed center distance applications.Belt's elasticity allows easy installation on fixed center distance pulleys without tools.Withstands high shock load.Polyamid tensile members protect belts from shock load damage, making them well-suited for small machines and other high speed/high shock load applications.High speed.Space savingSmall pulley requirement permits smaller, more compact designs.
StandardSizes
Type BeltnumberPitchlength
BeltnumberPitchlength
BeltnumberPitchlength
mm inch mm inch mm inch
H(Polyurethane)
6�H71H80H85H90H95H
100H106H11�H 118H1�5H
�0�.��15.9��8.8�41.��54.0�69.��85.4�99.7�17.5
8.08.59.09.5
10.010.611.�11.81�.5
1��H1�6H140H147H150H160H170H180H190H
��5.��45.4�55.6�7�.4�81.0406.44�1.8457.�48�.6
1�.�1�.614.014.715.016.017.018.019.0
�00H�14H�15H��1H��0H��5H�04H
508.054�.�547.056�.0584.�596.977�.�
�0.0�1.4�1.5��.1��.0��.5�0.4
J(Polyurethane)
81J8�J85J90J95J97J99J
108J116J117J1��J1�5J1�0J
�05.��09.1�15.9��8.6�41.��47.��51.��7�.8�9�.5�97.0�09.9�17.5��0.0
8.18.�8.59.09.59.79.9
10.811.611.71�.�1�.51�.0
1�5J1�9J14�J145J15�J160J171J175J180J189J194J�01J��4J
�4�.8�51.5�6�.��68.��89.�406.44�1.�44�.�457.�480.�49�.8510.5594.0
1�.51�.814.�14.515.�16.017.017.418.018.919.4�0.1��.4
��6J�50J�60J�64J�80J�00J�1�J�18J���J
599.46�0.8660.4670.0711.�76�.079�.5807.7819.�
��.6�4.8�6.0�6.4�8.0�0.0�1.��1.8��.�
Some sizes are not equal for actual pitch length (inch).
�
�
�
�
Dimensions
(H type)
p
θ a
b
(J type)P
ab
θ
TypePitch
PTotalthickness
aRibthickness
bAngle
�
H1.6mm (0.06�")
�.5mm (0.098")
1.0mm (0.0�9")
40˚
J�.4mm (0.094")
4.0mm (0.157")
�.�mm (0.091")
40˚
Sizemark
108 J 5
Number of ribs
Type
Nominal Length
V RIBBED BELTS (POLYURETHANE)
BANCOLLAN POLYBANROPE
40
ROUND BELTS (POLYURETHANE)
BANCOLLAN ROUND BELTS (Seamless Type)
Construction
Polyurethane without tensile members
StandardSizes
Type22mmdiameter
Type33mmdiameter
Type44mmdiameter
Type55mmdiameter
Beltlength Beltlength Beltlength Beltlength
mm inch mm inch mm inch mm inch
91.0100.0107.011�.01�0.01�5.01�0.01�4.01�6.0140.0145.0147.015�.0160.0170.0180.018�.0190.0�00.0�1�.0��7.0��9.0�44.0�50.0�7�.0�90.0 444.0 470.0
�.58�.944.�14.414.7�4.9�5.1�5.�85.�55.515.715.795.986.�06.697.097.�07.487.878.�98.949.419.619.84
10.7511.4�17.4818.50
115.01�0.01��.01�8.0140.0150.015�.0155.0160.0165.0170.017�.0180.018�.0190.0�00.0�04.0�1�.0���.0��0.0��6.0�40.0�50.0�60.0�75.0�8�.0�85.0�90.0�05.0�08.0��0.0�47.0�56.0�6�.0�76.0�90.0400.04�0.0441.0450.0645.0
4.5�4.7�5.�05.4�5.515.916.0�6.106.�06.506.696.777.097.177.487.878.0�8.�98.789.069.�99.459.84
10.�410.8�11.1011.��11.4�1�.011�.1�1�.991�.6614.0�14.�914.8015.�515.7516.9�17.�617.7��5.�9
140.0160.0170.0175.0�00.0�1�.0��5.0��0.0��5.0�50.0�54.0�58.0�64.0�75.0�84.0�85.0�90.0�00.0�05.0�16.0���.0���.0��5.0�46.0�61.0�67.0�70.0�74.0�77.0�85.0�90.0415.0474.0500.0540.0
5.516.�06.696.897.878.�98.869.069.�59.84
10.0010.1610.�910.8�11.1811.��11.4�11.811�.011�.441�.7�1�.071�.191�.6�14.�114.4514.5714.7�14.8415.1615.�516.�418.6619.69�1.�6
�00.0�10.0��0.0��5.0��0.0�47.0�48.0�50.0�75.0�90.0�00.0�05.0�10.0��0.0�45.0�48.0�6�.0�75.0�80.0�84.540�.04��.0440.0460.0685.0
7.878.�78.668.869.069.7�9.769.84
10.8�11.4�11.811�.011�.�01�.991�.581�.7014.�914.7614.9615.1815.8�16.6117.��18.11�6.97
Features+Benefits
Low starting torqueExcellent flexibility, provides smooth slip-free starts even in low temperatures.Easy installationEasy to install by hand.No retensioning needed.Minimal tension decay.High oil and ozone resistance
Sizemark
� × 100
Belt length in mm under no tension force
Type (diameter of round belt in mm)
�
�
�
�
BANCOLLAN (CORDLESS) FLAT BELTS
41
BANCORD ROUND BELTS
Construction
Polyurethane without tensile members
StandardSizes
ROUND Belts
DiameterofBeltmm 1.5 � �.5 � �.5 4 5 6 7 8 9 10 11 1� 15
inch 0.06 0.08 0.10 0.1� 0.14 0.16 0.�0 0.�4 0.�8 0.�1 0.�5 0.�9 0.4� 0.47 0.60
#480Standard � � � � � � � � � � � � � � �
#489highmodulus � � � � � �
Length/rail #480 �00m/roll #489 100m/roll 100m/roll
V Belts
Type Topwidtha Thicknessb Angle�
M 10.0mm 5.5mm 40˚A 1�.7mm 8.0mm 40˚B 16.7mm 10.�mm 40˚
Construction
Polyurethane without tensile members
Feature+Benefits
Smooth constant speedThickness tolerance is ± 0.00�0” (0.05mm), so there is virtually no speed variation.Space saving Minimum pulley diameter is 0.�” (5.0mm). This allows high speed ratios.
�
�
BANCORD V BELTS
Features
Simply cut and heat-splice the belt to the required length.
Dimensions
b
a
Sizemark
10 1.0 560
Inside length in mm
Thickness in mm
Width in mm
StandardSizes
a×b(mm) BELTINSIDELENGTH(mm)
10×1.0170~950 (Please contact to us for detail size)
The above belt should be installed at 6% stretch.
ROUND BELTS / V BELTS / FLAT BELTS (POLYURETHANE)
BANCORD (OPEN END TYPE)
4�
FLAT BELTS (RUBBER / POLYURETHANE)
PS BeltsBANDO PS Belts is made of seamless woven fabric. The fabric is coated with various kinds of rubber or polyurethane rubber. This belt is newly developed to meet precision drives such as office automation equipment, computer peripherals and banking machines.
Type*-1 ApplicableperformanceConstruction
Colortone
Availabledimensions*-3
Numberoftensilemember(ply)
MaterialofShapeofsurface*-2 Total
thicknessWidth Insideperimeter
lengthFrontsurface Rearsurface
A-1C Low-torque, high-speed power transmission Weather resistance, cold resistance
1-ply polyesterChloroprene
rubberRough surface
Smooth surface
Black 0.�� �~�00 100~1900
A-1ULow-torque, high-speed power transmission Weather resistance, oil resistance, abrasion resistance
1-ply polyester PolyurethaneRough surface
Smooth surface
White, green
0.�� �~�00 100~1900
A-4ULow-torque, high-speed power transmission Weather resistance, oil resistance, abrasion resistance
1-ply polyester PolyurethaneRough surface
Smooth surface
White, green
0.4 5~�00 180~5700
A-10NMedium-torque, high-speed power transmission Oil resistance, cold resistance
1-ply polyester Nitrile rubberRough surface
Smooth surface
Black 1.0 5~�00 �00~5700
A-13CMedium-torque, high-speed power transmission Weather resistance, cold resistance
1-ply polyesterChloroprene
rubberRough surface
Smooth surface
Black 1.1 5~�00 �00~5700
A-PMedium-torque, high-speed power transmission (No unraveling from edges)
4-ply polyamideImpregnated chloroprene
rubber
Canvas surface
Canvas surface
Black 1.�*-4
10~�50�00~1000
1000~�700
A-WMedium-torque, high-speed power transmission Quiet operation (No unraveling from edges)
1-ply vinylonCanvas fabric
Canvas surface
Canvas surface
Canvas natural color
�.0 �0~�00 800~5700
B-2CConveyance of light objects such as sheets of paper, tickets, etc. Weather resistance, cold resistance
1-ply polyesterChloroprene
rubberRough surface
Smooth surface
Black 0.8 5~�00 �50~5700
B-2HConveyance of light objects such as sheets of paper, tickets, etc. Weather resistance, anti-staining properties
1-ply polyesterHypalon rubber
Rough surface
Smooth surface
White 0.8 5~�00 �50~5700
B-2CEConveyance of light objects such as sheets of paper, tickets, etc. Superconductivity (a level of 100�)
1-ply polyesterChloroprene
rubberCanvas surface
Smooth surface
Black 1.1 10~�00 �50~5700
B-3CConveyance of light objects such as sheets of paper, tickets, etc. Low-torque, high-speed power transmission Weather resistance, cold resistance
1-ply polyesterChloroprene
rubberRough surface
Smooth surface
Black 0.6 10~�00 �50~5700
B-6NConveyance of light objects such as sheets of paper, tickets, etc. Low-torque, high-speed power transmission Oil resistance, abrasion resistance
1-ply polyester Nitrile rubberRough surface
Smooth surface
Black 1.0 10~�00 �50~5700
C-8CPrecision power transmission and conveyance of light objects on equipment fixed between axes
1-ply polyesterChloroprene
rubberRough surface
Smooth surface
Black 0.7 �~�00 160~5700
C-16CPrecision power transmission and conveyance of light objects on equipment fixed between axes
1-ply polyesterChloroprene
rubberRough surface
Smooth surface
Black 0.7 �~�00 160~5700
Z-H250XLow-torque power transmission, conveyance of light objects at high ambient temperatures (i.e., �50Åé or less)
1-ply aromatic amide
Silicon rubber
Mirror surface
Mirror surface
Liver 0.9 10~�00 460~�000
E-8UConveyance of light objects such as banknotes, cards, tickets, etc. on equipment fixed between axes
1-ply polyesterPolyurethane
(Millable)Polished surface
Polished surface
Black0.65 0.8 1.0
8~�00 50~1500
EX-101Conveyance of light objects such as banknotes, cards, tickets, etc. on equipment fixed between axes
1-ply polyesterPolyurethane
(Millable)Mirror surface (Mold surface)
Polished surface
Black0.65 0.8 1.0
8~�00 50~1�50
※-1 Besides types listed above, available types A-1N, A-4C, A-10C, A-1�N, B-�N, B-�UF, B-�N, B-6C, C-8N, C-8U, C-16N, C-16U, and others.※-� Select proper working surface according to your use conditions. Normally, it is recommended to use the smooth surface as the pulley surface.
Besides the surfaces listed above, rough/polished surface and mirror/mirror (polished on one side) are available. For further information, contact us or your representative.※-� Any belt dimensions other than standard ones are available on your request. For any dimensions other than available dimensions listed above, contact us or your representative.※-4 10 mm to (0.15Belt's inside perimeter length) mm
4�
Features
1.Compactdesign Drives are compact because of thin, seamless and flexible belt.2.Smoothrunning Seamless belt can give smooth running with no vibration.3.Maintenancefree Belt does not stretch because of specially treated tension member.4.Energysaver Lightweight and flexible belt minimizes power loss.
�:Optimum �:Suited ×:N/A
Type*-1Tensile
strengthN/10mmwidth
Axialloadatstabilizedextension
N/10mmwide
Min.pulley
diameter
Weight(approx.)g/10mmwideΧ
mlong
Abrasionresistance
Oilresistance
Electricalconductivity
Flameretardance
Ozoneresistance
Majorapplication
A-1C 150 0.5% �0 5 �.5 � � � � � Take-up of tapeDial drivingPrecision gauge drivingAcoustic equipment
••••A-1U 150 0.5% �0 5 �.� � � × � �
A-4U 400 0.5% 45 10 4 � � × � �
Terminal equipment • Communication equipmentCard readerMagnetic disk • Acoustic equipment
•••
A-10N 1000 0.5% 110 15 11 � � � � ×Grinding machine • Textile machineryRouting machine • Washing machineLine printer • Automatic lathe
•••
A-13C 1�50 0.5% 170 �0 1� � � � � �
Vacuum cleaner • Grinding machineRotary burnerTextile machinery
•••
A-P 1400 1% 1�0 �% �10 �% �80
50 11 � � � � �Printing machineAutomatic control device
••
A-W 1700 1% �00 �% 490
�0 9 × � × × �Thread plying machineCigarette making machine
••
B-2C �50 1% �0 �% 50 �% 60
10 9 � � � � �Ticket-issuing machine • Bank terminal machineAutomatic ticket gate • Automatic packaging machineMoney change machine • Cash dispenserBanknote checker • Office equipmentAutomatic checkerFare box • Ticket vending machine • Printing machine
••••••
B-2H �50 1% �0 �% 50 �% 60
10 9 � � × � �
B-2CE �00 1% 60 �% 80 �% 110
�0 1� � � � � �
Sorter • Copying machinePaper conveyance systemCash dispenser
•••
B-3C �80 1% 70 �% 1�0 �% 140
10 7 � � � � �
Copying machine • Motoring amusement machineAutomatic packaging machineMicrofilm equipment
•••
B-6N 600 1% 180 �% �80 �% �60
�5 11 � � � � ×Automatic checkerPrinting machine • Office equipmentOptical reader
•••
C-8C 80 1% 9 �% 15 �% �0
5 8 � � � � �Floppy diskOffice equipment
••
C-16C 160 1% �0 �% �0 �% 40
7 8 � � � � �
Document feederCopying machine • SorterFish detector
•••
Z-H250X 400 1% 1�0 �0 11 × � × � �
Copying machine • Heat sealing machineMeasuring meter • Testing machineLarge-sized facsimile
•••
E-8U -
5% 10 6% 1� 7% 14 8% 16
810/total
thickness 1.0mm
� � � � �
Bank terminal equipmentCash dispenserCard readerOffice equipment
••••
EX-101 -
5% 10 6% 1� 7% 14 8% 16
8 10 � � � � �
Bank terminal equipmentCash dispenserCard readerOffice equipment
••••
Nomenclature of beltB - � C E ① ② ③ ④
※-1 Besides types listed above. available types A-1N, A-4C, A-10C, A-1�N, B-�N, B-�UF, B-�N, B-6C, C-8N, C-8U, C-16N, C-16U and others.① Series name of belt ··· A: Mainly used for high-speed power transmission, B: Mainly used for conveyance of light objects such as sheets of paper, tickets, etc., C: Mainly used
for precision power transmission, Z: Mainly used for conveyance at high temperatures, E: Used for conveyance of light objects② Tensile strength of belt ··· Series A & B: Indicating 1/100 of tensile strength, Series C & E: Indicating 1/10 of tensile strength③ Material of cover ··· C: Chloroprene, N: Nitrile rubber, U: Polyurethane, H: Hypalon rubber④ Additional function ··· E: Electrical conductivity of a level of 100�, F: Certified by Food Sanitation Law and Official Notice No.�0 of Ministry of Health, Labour and Welfare.
※P,W: Special textile fabric
FLAT BELTS (RUBBER / POLYURETHANE)
PS Belts
44
AUTO MOTIVE POWER TRANSMISSION BELTS
AUTOMOTIVE POWER TRANSMISSION BELTS
V-BeltsWrapped type
Cut Edge type (Raw Edge) Type
RAF (laminated type)RPF (cogged type)
V-Ribbed Belts Rib Ace
OHC Synchronous / STS Belts
Features
Sidewallwearresistance Bendingstressresistance Noiselevel
Good Good Excellent
Wraped type
Excellent Good Excellent
RAF
Excellent Excellent Good
RPF
Excellent Excellent Excellent
RIB ACE
Excellent Excellent Good
OHC SYNCHRONOUS BELTS
Excellent Excellent Excellent
OHC STS BELTS
45
DimensionsandavailableSizeRange
BelttypeBandoprofile&Sizecode
Topwidth Thickness Angle Sizerange
V-Belts
FM �000
9.5mm (0.�8") 8.0mm (0.��") 40˚508mm-15�4mm
�0"-60" Outside length
HA 4000
1�.5mm (0.50") 9.5mm (0.�8") 40˚800.1mm-1651mm
�1.5"-65" Outside length
A �000
1�.0mm (0.50") 8.0mm (0.��") 40˚508mm-�0��mm
�0"-80" Inside length
B 5000
17.0mm (0.66") 11.0mm (0.44") 40˚508mm-�0��mm
�0"-80" Inside length
BC 9000
�0.0mm (0.80") 11.0mm (0.44") 40˚508mm-�540mm
�0"-100" Inside length
C 7000
��.0mm (0.88") 14.0mm (0.56") 40˚508mm-�540mm
�0"-100" Inside length
CD 8000
�5.5mm (1.00") 14.0mm (0.56") 40˚508mm-�540mm
�0"-100" Inside length
BelttypeBandoprofile&Sizecode
Ribpitch Thickness Sizerange
RIB ACE PK �.56mm (0.14") 4.8mm (0.19")�0"-100"
(500mm-�540mm)
BelttypeBandoprofile&Sizecode
Toothpitch Thickness Sizerange
OHC Synchronous Belts
ZA 9.5�5mm (0.�75") 4.10mm (0.16")
Please contact to us
ZB 9.5�5mm (0.�75") 4.50mm (0.18")
ZBS 9.5�5mm (0.�75") 4.89mm (0.19")
YH 8.0mm (0.�15") 5.�mm (0.�1")
ZH 9.5�5mm (0.�75") 5.65mm (0.��")
YU 8.0mm (0.�15") 5.0�mm (0.�0")
RU 9.5�5mm (0.�75") 5.40mm (0.�1")
BelttypeBandoprofile&Sizecode
Toothpitch Thickness Sizerange
OHC STS Belts
S8M 8.0mm (0.�15") 5.�mm (0.�1") Please contact to us
46
APPLICATION OF BANDO POWER TRANSMISSION BELTS IN DIFFERENT INDUSTRIES.
Rib Ace5PK 980Automotive belt
Automotive beltfor busHDPFRaw edge
Variable speed belt for motor bike
CARS & MOTORBIKE
47
CARS & MOTORBIKE
for motor bike Variable speed belt
for Automotive STS belt S8M 560
for Automotive Rib Ace belt 4PK 154�
48
Combine V Belt Red-S� single drive
V/S Belt �9.�4-994
Combine all drives
Video camera TN 10 × 1pc.
printer a copying machine STS 60 S�M5�7
AGRICULTURAL MACHINERY
HOUSEHOLD APPLIANCES
OFFICE EQUIPMENT
49
OTHER MACHINERY
KPS belt S8M115� injection molding
automatic door LSB-U
light conveyance LSB-U with profile
Ventilator Multiple V Belts red B-65
a b c d
50
BANDO POWER TRANSMISSION BELT TROUBLESHOOTING MANUAL
OPERATING AND MAINTENANCE
V-BELT
T h e a c c o m p a ny i n g d i a g r a m s s h ow t h e s i m p l e construction of a belt. Each belt has four components.
a) Cover: A canvas cover is usually wrapped completely around the belt, sometimes only on the top and bottom. It provides the proper amount of traction and protects the internal components from oil, dust and other foreign materials.It also increases belt flexibility.
b) CushionRubber: The material surrounding the Tensile Member. It absorbs the power from the power (pulley) and helps transmit this power to the driven sheave. Its high elasticity allows smooth bending and f lexing over even the smallest pulleys while preventing heat built-up. It is made of synthetic rubber.
c) AdhesionRubber: Sets the tensile cords in the right place and firmly bonds the cords with the cushion rubber.
d) Tensile Member: Cord like material running around the belt. The 'muscles' of the belt, it transmits power from one sheave to the next, (Made of Tetron R)
CONSTRUCTION
b
a
c
d
51
CONSTRUCTION
SYNCHRONOUS-BELT
Also called a "Timing Belt". It consists of four components:
a) RubberBacking: A synthetic rubber layer which gives protection to the tensile member. It is tough and flexible and completely bonded to the tensile member. Its excellent wear resistant backing can also be used for light duty transportation.
b) TensileMember: Made of helically wound glass fiber cord, it is designed to transmit the power. The small diameter cord possesses high tensile strength, low stretch and high resistance to bending fatigue.
c) RubberTeeth: Special synthetic rubber which has high shear strength and adequate hardness. To ensure that the teeth are compatible with the pulley grooves, they are precision made with a highly accurate pitch. (When the teeth in mesh [TIM] is 6 or more, the teeth shear strength virtually exceeds the belt's tensile strength).
d) Nylon Facing: A thin nylon cover cloth, tough with excellent abrasion resistance, protects the belt teeth from wear caused by pulley contact. This gives long belt service life.
5�
USETHERIGHTTYPEOFBELT
Normally you will know because the old belts will be labeled. However, if you cannot read the labels, use Bando Belt and pulley Gauges.
USEAMATCHEDSET
From the same manufacturer, bel ts f rom di f ferent manufacturers can have different characteristics. Slight differences between belts causes strain and shortens belt service life. When installing new belts, always replace all the belts. Old belts become worn and stretched from use; if old and new belts are mixed, the new belts will do more work and as a result will fail early.
SAFETY
Make sure that all equipment is turned off, even if you are only going to touch it for a moment.
The drive should be fully protected by a guard.This not only ensures safe operation but also protects the drive from debris and keeps the belt running smoothly.
SHEAVES
Should also be checked and worn ones replaced. Any rust should be removed from the sheave surface. It accelerates belt wear. Paint or wax should never be applied to the sheave grooves.
INSTALLATION
5�
INSTALLATION
SHEAVEMOUNTINGANDALIGNMENT
Unless belts enter and leave sheave in a relatively straight line, wear is accelerated. In Diagram 1 the shafts of the two drives are not parallel. In Diagram � although the shafts are parallel the sheaves are incorrectly aligned. Use a steel straight edge to ensure correct alignment.
BELTSMUSTNOTBEPRISEDORROLLESONTOTHESHEAVE
This damages the belt internally and greatly shortens belt service life.Fingers can also be seriously injured if caught in the sheave. Always use the motor side (drive take up).
BELTSMUSTBECORRECTLYTENSIONED
The correct tension can be calculated from the slack and the load. Or the Bando tension meter can be used. The Optimum Tension is the lowest tension at which the belts will not slip under full load.Over-and under- tensioning causes respect ively, damage to the shaft bearings and belt slippage.After installation the drive should be run for 15 minutes to seat the belts before peak load is applied.If they slip tighten them, check frequently during first day of operation.
STORAGE
Poor storage causes belt deterioration. To prevent this the following conditions should be observed:
a) Belts should be stored in a cool dark place, away from radiators and direct sunlight. Heat will dry out the belts and cause them to become brittle and hard. Optimum conditions, temperature below 85°F (�0°C), relative humidity below 70%.
b) Belts may be stored either by coi l ing them on shelves, or hanging them on wide suppor ts or multiple hooks.(Avoid laying them on the floor)
c) Ensure that no oil or chemicals come into contact with the belts.
54
TROUBLEAREA CAUSE REMEDY
BELTSSTRETCHBEYONDTAKEUPBelts stretch unequally. Misaligned drive. Realign and re-tension the drive.
Belts damaged during installation. Replace with a matched set, properly installed.
Belts stretch about
equally.
Insufficient take up allowance. Check take up allowance in manual.
Greatly over-or under loaded drive. Redesign using manuals.
SHORTBELTLIFERelatively rapid failure no
Visible reason.
Underdesigned drive. Increase the number of belts, use a wider belt,
a high-power transmission belt or redesign
using manual.
Sheave diameter too small. Redesign using manual.
Belt runs on to sheave flange, due to misalignment. Redesign using manual.
Worn sheave grooves. Replace sheaves.
Belt damaged through improper installation. Replace with matched set properly installed.
Foreign substance caught between belt and
sheave.
Shield the drive.
Sidewalls soft, sticky,
and swollen, low adhesion
between cover plies.
Oil or grease on belts or sheaves. Remove source of oil or grease.
Clean surfaces.
Sidewalls dry and hard,
low adhesion.
High temperatures. Remove heat source, ventilate drive better.
Belt bottom cracked
Belt bottom cut
Sheave diameter too small. Redesign using larger sheaves.
Back side idler-pulley diameter too small. Replace with an inside idler-pulley, or
redesign.
High temperatures. Remove heat source, improve ventilation or
use a heat resistant belt.
Belt slipping because of insufficient tensioning. Re-tension.
Improper storage. Store belts properly.
Belt ran off the sheave. Check tension and alignment.
Foreign material fell into drive. Install drive shield.
Improper installation. Install new belts properly.
Deterioration of rubber in
belt.
Belt dressing. Never use dressing on V-belts.
TROUBLESHOOTING
55
TROUBLESHOOTING
TROUBLEAREA CAUSE REMEDY
Extreme cover wear, worn
corners.
Dust attached to belt. Clean surfaces and re-tension. Install shield.
Belt loosely tensioned. Re-tension.
Too few belts. Increase belt quantity.
Sheave grooves rusted. Remove rust or replace sheave.
Sharp corners or burrs on sheaves. Round corners and remove burrs with a file.
Sheaves misaligned. Re-align.
Angle of sheave groove incorrectly finished or
badly worn.
Replace sheave with a new one, with suitable
groove angle.
Outside diameter of right and left side of the
sheave differs.
Replace with an accurately machined one.
Spin burns on belt. Belt slips under starting or stalling load. Tighten belt until slipping stops.
Belt too loose. Adjust belt tension.
Sheave diameter too small. Replace sheave or use suitable belt.
Belt load miscalculated. Increase number of belts, or use high power
transmission capacity belt.
Water or oil on the belt. Install belt cover. Completely wipe the belt
clean.
Belt irregularly deformed. Belts ware piled up or bent when stored. Store belts by hanging them or by coiling on shelves.
BELTTURNOVERExcessive lateral belt whip. Use high power transmission capacity belt.
Foreign material in grooves. Install belt cover.
Misaligned sheaves. Realign.
Worn sheave grooves (use gauge). Replace.
Belt loosely tensioned. Adjust tension.
Belt deformed by fluctuating load. Replace with scrum, flat, or poly-V-belt.
Belt demaged through improper installation. Replace with matched set, properly installed.
If multi-strand driven, belt lengths differ. Replace belts with a matched set.
BELTVIBRATESIncorrectly placed flat idler pulley. Carefully align idler on flat side as close as
possible to drive shaft.
Distance between shafts in too long. Install an idler.
Belt too loose. Re-tension.
Belt lengths uneven. Replace with a new matched set belts.
56
TROUBLEAREA CAUSE REMEDY
BELTMEANDERSBELTNOISESheaves are misaligned. Realign.
Belt slips because of under tensioning, start up or
stopping time too abrupt.
Re-tension.
Lengthen start up and deceleration time.
Drive slower.
Too few belts. Increase belt quantity.
Belt type unsuitable. Replace with wrapped V-belt.
IMPROPERDRIVENSPEEDDesign error (incorrect ratio between drives). Use correct sizes.
EXCESSIVESLIPPINGSpin burns on belt. Re-tension drive until slipping stops.
Too few belts. Increase belt quantity.
Contact angle too small. Install back side idler pulley on slack side or
use synchro belt.
Water or oil on the belt. Install belt cover, and clean surfaces.
HOTBEARINGSDrive overtensioned. Worn-grooves, belts bottoming. Replace sheaves, re-tension drive.
Improper tensioning. Re-tension.
Sheaves too small. Design error. Redesign using manuals.
Poor bearing condition. Bearings underdesigned and/or badly maintained. Observe recommended bearing design and
maintenance.
Sheaves too far out Installation error or obstruction. Place sheaves as close to bearings as
possible, remove any obstructions.
Drive undertensioned. Belt slipping, causing heat build up. Re-tension drive.
SYNCHRONOUS-BELT:Teeth broken off Belt skips pulley teeth because its undertensioned. Re-tension.
Pulley teeth poorly machined, or badly worn. Replace pulley with correctly machined one. If
dust on teeth surfaces install cover.
Equipment stopping too quickly. Increase deceleration time, or use a stronger
belt.
Fewer than specified belt teeth are gripping the
pulley teeth.
Install back side idler on stack side of belt, or
redesign.
TROUBLESHOOTING
57
TROUBLESHOOTING
TROUBLEAREA CAUSE REMEDY
Belt becomes stiff and
cracks generate over the
surface of belt.
Ambient temperature is excessively high.
(over 90�)
Decrease the temperature or use heat-
resistant belt.
Belt breaks off without
leaving any fatigue.
Power transmission capacity of belt is
insufficient.
Use a wider belt, increase the diameter of
pulley, or trace the belt selection procedure
again.
Belt is unnaturally bent. Pay much attention to the maintenance or
handling of the belt.
Belt is installed by forcible wrenching. Install the belt by loosening the pulley slide or
the tension pulley.
Foreign substance is caught in. Install a belt cover.
Belt runs on to the flange of pulleys due to the
excessive misalignment of pulleys.
Align the pulleys.
One or both edges of belt
are worn out or broken
off.
Pulleys are misaligned. Align the pulleys.
The outside diameter of right and left side
pulleys differ.
Replace the pulley with an accurately
machined pulley.
POWERBANDBELT:Tie band separation belt
riding out of sheave
groove
Worn sheaves (check with gauge) Replace with new sheaves.
Misalignment of sheave. Realign.
Lack of tension. Re-tention.
Foreign object forced belt out. Remove any interference.
Riding outside and above sheave grooves. Properly maintain drive, and install belt
correctly.
All belts seprated from tie
band.
Drive shield loose and interfering with belt.
Worn idler sheave.
Adjust shielding.
Replace.
Top of tie band frayed Obstruction on machine. Realign drive and remove obstruction.
Tie bando top blistered Foreign material accumulating between belts
of power band.
Check shielding on drive.
Bottom of belt cracking. Belt slipping causing heat build up and gradual
hardening of undercord.
Check tension of power band.
58
The typical examples of power transmission belt trouble are presented below. These troubles are the result of faulty designing, handling or matching of belts and sheaves.
1.Cracksatthebottomofbelt
2.BreakoffofBelt
3.Twistingofbelt
EXAMPLES OF POWER TRANSMISSION BELT TROUBLE
59
EXAMPLES OF POWER TRANSMISSION BELT TROUBLE
4.Sidewearofbelt
5.BreakoffofBelt
6.Cracksonthebeltsurface
7.Sidewearofbelt
60
Belt Design Factors
(Fill in the blanks and consult with Bando.)
1 Machine type
� Service factor1.0 1.1 1.� 1.� 1.4 1.5 1.6 1.7 1.8 1.9 �.0 �.1 �.� �.� �.4 �.5 �.6 �.7 �.8 �.9 �.0
� Type of drive Motor EngineNormal: Max:
(PS. KW. kg-m, kg-cm)
4 Transmission characteristics Horse power constant Torque constant Operating hours / Day (hrs.)
5 Speed ratio Acceleration, Reduction : Pulley layoutDescribe separately if details are required.
6 Drive pulleyOuter dia.Pitch dia.
(mm) × (r.p.m.)
7 Driven pulleyOuter dia.Pitch dia.
(mm) × (r.p.m.)
8 Tension pulleyYesNo
(φ) Insideoutside
Slack sidetight side
9 Center distance ± (mm)
10 Drive system
Ordinary Horizontal Vertical
11 Sudden stop
Sudden stop
YesNo
Brake:
Input sideOutput side
Time from suddenStop to suddenStart or vice versa. (sec)
GD�: (kg-m-sec�)
1� Pulley space Any restriction:
1�Special requirement (Circle items and describe in detail.)
Heat resistance, Oil resistance, Cold resistance, Moisture resistance, Low noise, static conductive, Insulation, Others (Speed-up, Compactness, Vibration Non-slip, Light weight etc.)
Details
14 Belt Service Life desired (hrs.) Service condition: outdoor, dusty, others
15General Information on Belts now used.
Manufacturer: Type:Total quantity: Quantity by size:Belt service life Any problems:
Bando reserves the right to change product design, size, specifications, and materials at any time without obligation of replacement or refund on any products or parts there of which may be in any customers' possession at the time such changes become effective.Bando Chemical Industries, Ltd. shall not be liable for any damages and/or injuries whatsoever caused by any usage of the belts in this brochure for purposes other than power transmission.
61
MEMO
6�
http://www.bando.co.jp
BANDO CHEMICAL INDUSTRIES, LTD. 2008.2JAPAN OverseasBusinesscontact:
Overseas Business Administration Department 6-6, Minatojima Minamimachi 4-chome, Chuo–ku , Kobe 650-0047, JapanTEL: 81-78-���-�815 FAX: 81-78-���-�907E-Mail: [email protected]
NORTHAMERICA
BandoUSA,Inc.1149 West Bryn Mawr, Itasca, Illinois 6014�, U.S.A.
TEL: 1-6�0-77�-6600 FAX: 1-6�0-77�-691�
ASIA BandoManufacturing(Thailand)Ltd.47/7 Moo 4, Soi Watbangpla, Tambol Bankao, Amphur Muang, Samutsakorn, 74000, THAILANDTEL: 66-�446-84�� FAX: 66-�446-8415
EUROPE BandoEuropeGmbhNikolaus Strasse 59, D-41169 Moenchengladbach, FEDERAL REPUBLIC OF GERMANYTEL: 49-�161-90104-0 FAX: 49-�161-90104-50
BankoKoreaCo.,Ltd869-1, Eogok-Dong, Yang San City, Gyung Sang Nam-Do, 6�6-��0, REPUBLIC OF KOREATEL: 8�-55-�71-9�00 FAX: 8�-55-�88-0087
BandoIbericaS.A.Calle Francesc Layret 1�-14, Naves 4-5, Poligono Industrial Sant Ermengol �, 086�0 Abrera, (Barcelona), SPAINTEL: �4-9�-7778740 FAX: �4-9�-7778741
BandoJungkong,Ltd.4BA-705 (Shihwa Indus. Zone, Mechatronics Complex), Songgok-Dong, Ansan City, Kyongki-Do, REPUBLIC OF KOREATEL: 8�-�1-4��-98000 FAX: 8�-�1-4��-8198
BandoKockayaBeltManufacturing(Turkey),Inc.Ihasan Dede Cad. 1000 Sokak, Gebze Organize Sanayi Bolgesi, 41480 Gebze, Kocaeli, TURKEYTEL: 90-�6�-751-1691 FAX: 90-�6�-751-1698
SanwuBandoInc.11FL-�, No.51, Sec.1, Min Sheng E. Road, Taipei, TAIWAN
TEL: 886-�-�567-8�55 FAX: 886-�-�567-�710
ASIA Bando(Signapore)Pte.Ltd.�C Toh Guan Road East #50-01 SINGAPORE 6088��
TE: 65-6475-���� FAX: 65-6479-6�61
BandoSiixLimitedRoom ��10, Shun Tak Centre, West Tower, �00 Connaught Road Central, HONG KONG TEL: 85�-�494-4815 FAX: 85�-�481-0444
PhilippineBeltManufacturingCorporation�nd Floor, Siemkang Building, �80-�8� Dasmarinas Street, Binondo, Manila 1099, PHILIPPINESTEL: 6�-�-�41-0794 FAX: 6�-�-�41-��79
BandoBelt(TianJin)Co.,Ltd.No. �7 of HaiTong Avenue, TEDA, Tianjin, �00457, CHINA
TEL: 86-��-66��-7077 FAX: 86-��-66��-70�6
KeeFattIndustries,Sdn.Bhd.NO.� Jalan Sengkang, Batu ��, Kulai 81000 Kulai, Johor, MALAYSIATEL: 60-7-66�-9661 FAX: 60-7-66�-9664
BandoManufacturing(Shanghai)Co.,LtdRm.B, First Floor, Block 56, No.199, Riying North Road, Wai Gao Qiao Free Trade Zone, Pudong District, Shanghai, China.TEL: 86-�1-5046-0161 FAX: 86-�1-5046-0649
PengeluaranGetahBando(Malaysia)Sdn.Bhd.No.� Jalan SengKang, Batu ��, Kulai 81000 Kulai, Johor, MALAYSIATEL:60-7-66�-50�1 FAX: 60-7-66�-50��
BandoManufacturing(Dongguan)Co.,Ltd.Building ZF8, ZhenAn Industrial Park, ZhenAn Road, ChangAn Town, DongGuan City, GuangDong Province, ChinaTEL: 86-769-8564-5075 FAX: 86-769-8564-5081
P.T.BandoIndonesiaJI. Gajah Tunggal, Kel. Pasir Jaya, Kec. Jati Uwung, Tangerang 151�5, INDONESIATEL: 6�-�1-590�9�0 FAX: 6�-�1-5901�74
Bando(India)PrivateLimitedPlot No.�55, Sector-7, IMT Manesar, Gurgaon-1��050 Haryana INDIA TEL: 91-1�4-4�6-8951 FAX: 91-1�4-4�6-8954