Date post: | 03-Jan-2016 |
Category: |
Documents |
Upload: | cora-briggs |
View: | 123 times |
Download: | 2 times |
Bang & Olufsen BtB –How to update the BtB module
1. Connecting
• Connect the PC to the RS232 port on the TV. Use the RS232 cable (Thin cable. DSUB9 to Minijack)
– RS232 is called “1 HOTEL DATA” on BV10.– On BeoVision 7-40 use the port labeled ‘RS232’– On BeoSystem 3 use the port labeled ‘RS232’
BeoVision 8/10 BtB module BeoVision 7-40 back
RS232 port and OC is not always left and right.On BV10-40 and 46” RS232 is located to the right, when looking from behind.One BV10-32 RS232 is located to the left.On BeoVision 10, RS232 is always called ”1 HOTEL DATA” and OC is always called ”3. Service”
1. Connecting
• Connect the PC to the RS232 port on the TV. Use the RS232 cable (Thin cable. DSUB9 to Minijack)
– RS232 is called “1 HOTEL DATA” on BV10.– On BeoVision 7-32 use the P2 connector.
BeoVision 7-32 back
2. Updating the module
• Open the BtB upgrader.• Follow the instruction of the BtB upgrader and press Start.
Bang & Olufsen Concept Store
Bang & Olufsen Concept Store
3. Verify software version
• First disable the BtB mode by pressing “Menu, 0, 0, GO” on the remote, if this has already been set.
• Turn the TV on and press Menu
• Move the cursor to the OPTIONS menu and press “0, 0, GO”. Now choose the Business To Business menu.
TV SETUP
TUNING
SLEEP TIMER
▼select accept o
OPTIONSSERVICE MENU
MONITORTV-TUNERBUSINESS TO BUSINESSDVB SERVICEPRODUCT TYPEAUDIO SERVICESETTINGS
▼select accept o
BUSINESS TO BUSINESS
3. Verify software version
• In the Business To Business menu in the TV service menu, you can find the BtB application software version (in this case 6.62v).
• In here you will also be able to enable or disable the BtB mode.
BUSINESS TO BUSINESS
BTB ENABLE OFF
BTB SETTINGSBTB VERIFICATION TESTBTB INSTALLATION SETUP
STBC POWER ON 5 VBTB AP SW 06.62vBTB M-STB ID Unknown
▼select accept o
BTB ENABLE OFF
The End