Base Catalog

ENTRANCE PROTECTIONSYSTEMS

BUILT TO SERVE SPECIALTIESBASE

TABLE OF CONTENTSIntroduction & Mission Statement.......... 2Grid Series 700....................................... 3Mid-Profile Tread Series 500................... 4Low-Profile Tread Series 200.................. 5Mats Series 300...................................... 6Mats Series 400...................................... 7Grille (stainless steel) Series 800............ 8Reversible Grid Series 900...................... 9Mat-Tray Series 1000.............................. 10Colors, insert........................................... 11

BASE MISSION Our business is helping you, our customer,

keep buildings clean with Base Grid, Tread, Mat or

Grille entrance protection systems. All Base systems

are designed to collect dirt, mud and sand at the

entryway – and to help prevent tracking through the

interior of the building. To that end, we design and

manufacture the exact entry protection product best

suited to your building and application. We offer

company (custom orders welcome). Call us on your

next job. We appreciate the

opportunity to show you how

Base Specialties makes

a difference.

Ed Green, CEO

2


866-391-6216www.base-spec.com [email protected]: 651-463-2273 F: 651-463-2320

Photos at right show Base Grids, Treads, Mats and Grilles in a variety of entrance protection applications. Buildings include banks, libraries, schools, manufacturing

vinyl frame or surface mounted in a rubber tray.

BASE GRID SERIES GB-700 FOR HEAVY TRAFFIC AREAS

Helps keep buildings clean Strong – 1-3/4" deep I-beam cross sectionOur strongest entrance systemIdeal for heavy foot and cart traffic Use indoors and out – versatile in

most recess applications

The Base GB-700 Series has a rugged 1-3/4"

I-beam aluminum frame – most rugged and

durable entrance protection system in our

product line. An aluminum cross member

gridlock keeps the grid in place while vinyl

11 for insert types and colors.

SPECIFICATIONSSubject to change without notice

Material: 6063-T52 aluminum with various insert optionsDepth: Grid only; 1-3/4”Depth: Grid and frame (level base); 2”LEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1-point)Recycle content: 46% pre-consumer

1-1/2"

1/8"

1-3/4"

1-1/2"

1-3/4"

1/8"

1-1/2"

1/8"

1-3/4"

1-3/4"

1-1/2"

1/8"

1-1/2"1/8"

1-3/4"

GB-700 CARPET GB-701 VINYL

GB-702 POLY-BRUSH GB-704 VINYL ABRASIVE

GB-705 SERRATED ALUMINUM

1/8"1-1/2"

GRIDLOCK

CUSHION CUSHION

1-3/4"

CONCRETE

FRAME

FLOOR

2"

2"

1/4"

Recessed application includes optional

2" x 2" x 1/4" aluminum

frame

1-3/4" I-BeamBase Grid

3

Ideal forheavy traffic areas



1-3/4"

1-1/2"

1/8"

GB-706 SERRATED INSERT

3/4" Mid-ProfileBase Tread

1/8"

1-1/2"

3/4"5/8"

GB-500 CARPET

1/8"

1-1/2"

3/4"5/8"

1/8"

1-1/2"

3/4"5/8"

1/8"

1-1/2"

3/4"5/8"

1/8"

1-1/2"

3/4"5/8"

GB-501 VINYL

GB-502 POLY-BRUSH

GB-504 VINYL ABRASIVE


Recessed application requires use of aluminum frame illustrated at left. The frame helps create a clean installation with well defined edges and corners.

BASE TREAD SERIES GB-500 FOR MEDIUM TO HEAVY TRAFFIC AREAS Strongest tread – 3/4” mid-profile tread25% more surface wiping areaSmooth surface – less wheel bump

Use indoors and out – versatile in most recess applications

The Base GB-500 Series 3/4” Tread supports heavy

tread. 3/4” aluminum framework assures dimen-

sional stability and longevity. A vinyl hinge allows

the tread to be rolled up and moved for under-tread

runs the full width and length of each section and

page 11 for insert types and colors.


Material: Corrosion-resistant 6063-T52 aluminum with various inserts fusion bonded to backing for durabilityThickness, overall: 3/4”Additional specs: 6063-T52 aluminum spaced 1-1/2” on center and connected with rubber hinges with 1/8” slotted holes for maximum drainageWeather resistance: Hinges and footpads remain flexibleRolling load: Up to 1,000 lbs./wheelLEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1-point)Recycle content: 38.3% pre-consumer

1/8"1-1/2"

3/4"

CONCRETE

FRAME

FLOOR

1"

1"

1/4"

4

Heavyduty

vinyl hingeroll-up tread



1/2" Low-ProfileBase Tread

1/8"1-1/2"

7/16"3/8"

GB-200 CARPET

1/8"1-1/2"

7/16"3/8"

1/8"1-1/2"

7/16"3/8"

1/8"1-1/2"

7/16"3/8"

1/8"1-1/2"

7/16"3/8"

GB-201 VINYL

GB-202 POLY-BRUSH

GB-204 VINYL ABRASIVE


Recessed application requires use of aluminum frame illustrated at left. The frame helps create a clean installation with well defined edges and corners.

BASE TREAD SERIES GB-200 FOR MEDIUM TRAFFIC AREAS

Strong – 1/2” low-profile tread25% more surface wiping areaSmooth surface – less wheel bump Use indoors and out – versatile in

most recess applications

The Base GB-200 Series 1/2” Tread supports me-

mud, dirt and soilage. The rugged 1/2” aluminum

framework assures dimensional stability and

longevity, while the vinyl hinge allows the tread to

be rolled up and moved for under-tread cleaning. A

width and length of each section and provides a

insert types and colors.


Material: Corrosion-resistant 6063-T52 aluminum with various inserts fusion bonded to backing for durabilityThickness, overall: 1/2”Additional specs: 6063-T52 aluminum spaced 1-1/2” on center and connected with rubber hinges with 1/8” slotted holes for maximum drainageWeather resistance: Hinges and footpads remain flexible.Rolling load: Up to 1,000 lbs./wheelLEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1 point)Recycle content: 38.3% pre-consumer

1/8"1-1/2"

7/16"

CONCRETEFRAME

FLOOR

1-1/2"

1/2"

1/16"

5

Weather resistant

vinyl hingeroll-up tread



BASE MAT SERIES MB-300 FOR LIGHT TO MEDIUM TRAFFIC AREAS Dimensionally stable, popular

aluminum hinge for “roll-up” ease during maintenance Surface and recessed applications Ideal for exterior and interior entryways,

foyers, vestibules, etc.

Base Series 300 Mats are an economical barrier

The mats feature aluminum hinged framework with

cushioned supports at the bottom of each segment.

All Base Mats facilitate cleanup — roll up and clean

beneath. See page 11 for insert types and colors.


Material: Corrosion-resistant 6063-T52 aluminum with various insert optionsThickness: Mat only; 3/8”Depth: Mat and frame (level base); 7/16”Frame options: Surface mount ramp or recessed frameAdditional specs: Aluminum hingesLEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1-point)Recycle content: 49% pre-consumer

Base Mat system shows (1) tapered 2” x 3/8” vinyl ramp-spacer for surface applications, (2) aluminum hinge mat 2” on centers, (3) 2” x 3/8” spacer for recess applications and (4) 1” x 7/16” aluminum frame for recess applications. Both vinyl spacers are available with and without under-mat tongues (illustrated on ta-pered ramp-spacer 1). A 1-3/8” x 3/8” aluminum ramp is available in place of vinyl ramp-spacer.

CUSHION CUSHION

CUSHION CUSHION

CUSHION CUSHION

CUSHION CUSHION

CUSHION CUSHION

MB-304 VINYL ABRASIVE

MB-305 SERRATED ALUMINUM

MB-300 CARPET

MB-302 POLY-BRUSH

MB-301 VINYL

3/8" Low-ProfileBase Mat

Aluminum hinge

6

Weather resistant roll-up mat



BASE MAT SERIES MB-400 FOR LIGHT TO MEDIUM TRAFFIC AREAS Dimensionally stable, quiet

vinyl hinge for roll up ease during maintenance Surface and recessed applications Ideal for exterior and interior entryways,

foyers, vestibules, etc.

Base Series 400 Mats are an economical barrier for

mats feature vinyl hinged framework with cushioned

supports at the bottom of each segment. All Base

Mats facilitate cleanup — roll up and clean

beneath. See page 11 for insert types and colors.


Material: Corrosion-resistant 6063-T52 aluminum with various insert optionsThickness: Mat only; 3/8”Depth: Mat and frame (level base); 7/16”Frame options: Surface mount ramp or recessed frameAdditional specs: Rubber hingesLEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1-point)Recycle content: 49% pre-consumer

Base Mat system shows (1) tapered 2” x 3/8” vinyl ramp-spacer for surface applications, (2) vinyl hinge mat 2” on centers, (3) 2” x 3/8” spacer for recess applications and (4) 1” x 7/16” aluminum frame for recess applications. Both vinyl spacers are available with and without under-mat tongues (illustrated on tapered ramp-spacer 1). A 1-3/8” x 3/8” aluminum ramp is available in place of vinyl ramp-spacer.

MB-404 VINYL ABRASIVE

MB-405 SERRATED ALUMINUM

MB-400 CARPET

MB-402 POLY-BRUSH

MB-401 VINYL

3/8" Low-ProfileBase Mat

Vinyl hinge

7

Weather resistant roll-up mat



BASE GRILLE SERIES 800 STAINLESS STEEL

Look and feel of stainless steel Long-lasting entrance system3 heights: 3/8", 5/8", 9/8"

Durable welded constructionSupports foot and cart traffic

Base 800 Series Stainless Steel Grille systems make

Built to last, Base Grilles maintain a “like new”

look through the four seasons and throughout years

of service. Surface beams and cross struts are robot

welded at each intersection to assure longevity and a

positive appearance in your application.

Base Stainless Steel Grilles enhance building appearanceBase Grilles help keep buildings clean, cut floor maintenance costs and provide an aesthetic touch to any building. Dirt and soilage drop through the voids and concentrate in the grille re-cess. Custodians simply lift a grille section and vacuum up dirt and debris. Grilles have lockdowns — removal and replace-ment is easy. Available in three heights (3/8", 5/8" and 9/8").

8


Material: Stainless steel with support bars spaced 1” apart for maximum load capacityConstruction: Surface wires .093” (2.4 mm) by 0.156” (4 mm) with 0.70” (1.8 mm) support bars spaced 1” (24mm) o.c. Spacing between rails shall be 0.140” (3.6 mm)Tread finish: Satin, stainless steelLEED: MR credits 4.1, 4.2 – recycled content; EQ credit 5

A

B

1/8"



L-frame available for recess applications – for use on all four sides of grille

3/8" Grille 5/8" Grille 9/8" Grille

Frame: A=1/2" / B=3/4" Frame: A=3/4" / B=3/4" Frame: A=1-1/4" / B=1-1/4"

BASE REVERS-A-GRIDSERIES 900 FOR HEAVY TRAFFIC AREAS

Reversible – flips top to bottom Long lasting – doubles grid lifeBuffed rubber wiper bars with raised

aluminum scraper stripsSupports foot and cart traffic

Base 900 Series Revers-A-Grid combines

absorbent buffed rubber wiper bars with raised

aluminum scraper strips – top and bottom. Grid can

be reversed – doubles mat life. Functions in surface

and recessed applications – indoors and out.

Insert colors: gray or black. See L4 frame option

(right) for recess application. B1 and B2 ramp

options (right) for surface applications. Connector

strip joins sections.


Material: Alternating strips of scraper bars (aluminum) and wiper bars (buffed or unbuffed rubber) Design: Gray or black rubber wiper bars Depth: 15/32”LEED: Possible LEED-NC credits; MR credit 4 (1-2 points); IEQ credit 5 (1 point)Recycle content: 25% pre-consumer and 75% post-consumerSizes: Custom made to your specifications

Base Revers-A-Grid scrapes debris and absorbs moisture

REVERSIBLEfor long life

9



1-1/8"

7/16"

1/2"

1-1/2"

L4 frame available for recess applications – for use on all four sides of Revers-A-Grid

1/2"

1"

Connector strip (inverted “T”) joins sections – for use on traffic direction abutments

Colors

7/16"

1-3/8"

B2 aluminum ramp for surface applications

Gray Black

1-3/8"

CONCRETE

1-1/8"

7/16"

CONCRETE

FINISHEDFLOOR

L4 FRAME

1-1/8"

7/16"

Dimensions

Surface application

Shallow recess application

BASE MAT-TRAY SERIES 1000

Concentrates sand, mud, dirt in tray Helps prevent inside dirt tracking Makes clean-up simpleEasy surface applicationResidential and commercial

Base 1000 Series Mat-Tray concentrates dirt and

is quick and easy. Keeps soilage out of homes and

buildings. Tray perimeter is a 2" ramp – helps

maintain sure footing (no vertical edge). Tray has

bottom. Interior tray rectangle recess is 3/8". Accepts

Base Series 300 aluminum hinge inset mat (see

opposite page for insert types and colors).


Base Mat-Tray helps keep sand, mud, dirt out of commercial buildings and fine homes

10



Vinyl Insert Colors

Poly-Brush Colors

Metal Colors

Vinyl Abrasive Colors

Carpet Insert Colors

Durable insert with scraping ribs

Deep pile polypropylene with cleaning bristles

Mill finish is standard. Optional colors are anodized for durability.

Slip-resistant insert surface provides traction and sound footing.

Heavy duty nylon carpet insert stands up to normal foot traffic – absorbs moisture and helps keep buildings clean

BASE METAL AND INSERT TREAD COLORSColors shown are printed approximations. For exact color match, request a sample

Carpet Insert Colors

11




525 First St., Farmington, MN 55024Toll-free: 866.391.6216Phone: 651.463.2273Fax: 651.463.2320E-mail: [email protected]: www.base-spec.com

ENVIRONMENTALLY FRIENDLY ENTRANCE PROTECTION SYSTEMS

Represented by:

Date post:	16-Mar-2016
Category:	Documents
Upload:	ed-green
View:	220 times
Download:	0 times

Base Catalog

Documents