All Resin Ornamentation is Flexible, Stainable & Paintable.

Pearlworks, Inc. 14251 Franklin Ave. Tustin, CA 92780Office: (714) 573-1700 Fax: (714) 573-1708 Toll Free: (855) PEARLWORKS

www.pearlworksinc.com

B A S E S

BASES

BASE-100A $29.954-3/4” x 3-3/4” x 4-3/4”BASE-100B $34.956-1/4” x 5” x 6-3/4”

BASE-104 $159.959-1/4” x 13-1/2” x 4-3/4”Top: 7” x 4” Thick

BASE-103 $499.958-1/2” x 37-3/4” x 7”

Shown with: BASE-103T

BASE-102 $34.955” x 6-3/4” x 4-1/2”

BASE-103T $99.959-3/4” x 4-1/2” x 8”

BASE-102A

BASE-100A

* All sizes are approx.- max W” x max H” x Thickness”2

BASE-102A $49.958” x 4-3/4” x 5-1/4”

Top View

BASE-102A

BASE-105 $29.95360º part (round)4-3/4” dia. x 5-3/4”

* All sizes are approx.- max W” x max H” x Thickness” 3

BASE-106AA *5-1/2”

BASE-106A *5-1/2”

BASE-106B *8”

BASE-106C *10-3/4”

BASE-106D *12-1/4”

Top View

*BASE-106AA $34.952-1/2” x 8-1/2” x 1-1/4”Top (curved) 2-1/2” W x 1” D

BASE-106A $49.953-3/4” x 8-1/2” x 1-1/2”Top (curved) 3-1/2” W x 1-1/4” D

BASE-106B $69.955” x 11” x 1-1/2”Top (curved) 4-3/4” W x 1-1/4” D

BASE-106C $99.955-3/4” x 14-3/4” x 2”Top (curved) 5-1/2” W x 1-3/4” D

BASE-106D $129.957-1/4” x 16-3/4” x 3”Top (curved) 7-1/4” W x 2-1/2” D

BASE-107B $69.956” x 14” x 1-1/2”Top (curved): 5” x 1-1/4”

BASE-107C $99.957” x 18” x 2-1/4”Top (curved): 5-3/4” x 2”

BASE-107D $129.959” x 21-1/2” x 3-1/4”Top (curved): 7-1/2” x 2-3/4”

BASE-107B *10-3/4”

BASE-107C *14-1/2”

BASE-107D *17-1/4”

BASE-112AA $34.952-1/2” x 7-1/2” x 1-1/4” Top (curved) 2-1/2” W x 1” D

BASE-112A $49.953-3/4” x 8-1/4” x 1-1/2”Top (curved) 3-3/4” W x 1-1/2” D

BASE-112B $69.955-1/2” x 10-3/4” x 1-1/2”Top (curved) 4-3/4” W x 1-1/4” D

BASE-112C $99.957” x 15” x 2-1/4” Top (curved) 5-1/2” W x 2” D

BASE-112D $129.958-1/2” x 18-1/2” x 3-1/4” Top (curved) 7-1/2” W x 2-3/4” D

BASE-112AA *5-1/2”

BASE-112A *5-1/2”

BASE-112B *7-1/2”

BASE-112C *10-3/4”

BASE-112D *13-1/4”

This measurement denotes maximum height and width of baseboard that can butt into BASE-106, 107 & 112

BASES

B A S E S

Top View Top View

* All sizes are approx.- max W” x max H” x Thickness”

BASES

4

Top View

BASE-110B

Outside CornerBASE-109-O $24.95

7” Height x 2-1/4” Thick Bottom: 3-1/4” Wide

BASE-109-I and BASE-109-O are specificallydesigned to use with MLD-320.

Inside CornerBASE-109-I $24.957-1/4” Height x 2-1/2” ThickBottom: 3-1/2” Wide

BASE-110B $19.955” x 5-1/4” x 1-1/4”Designed to use withMLD-320

BASE-108B $69.956” x 14” x 2-3/8”

BASE-111B $69.956” x 14” x 2”

* All sizes are approx.- max W” x max H” x Thickness” 5

B A S E S BASES

BASE-113AA $39.95Height: 5-1/2”Top: 2-3/4” dia.Bottom: 3-1/4” dia.Designed for “TAPERED” COLM-103AA-TC-36-1/2” .BASE-113A $49.95Height: 7”Top: 3-1/2” dia.Bottom: 4” dia.Designed for “TAPERED” COLM-103A-TC-60".BASE-113B $59.95Height: 8”Top: 3-5/8” dia.Bottom: 4-3/4” dia.Designed for “TAPERED” COLM-103B-TC-68".

BASE-115 $39.95Height: 5-1/4”Top: 3-3/4” dia.Bottom: 4-3/4” dia.Designed for “TAPERED” COLM-103B-TC-68".

BASE-126AA-TC $29.95Height: 3-1/8”Top: 2-1/2” dia.Bottom: 3-1/4” dia.Designed for “TAPERED” COLM-103AA-TC-36-1/2".BASE-126A-TC $44.95Height: 3-3/4”Top: 3” dia.Bottom: 4-1/2” dia.Designed for “TAPERED” COLM-103A-TC-60".BASE-126B-TC $59.95Height: 4-1/2”Top: 3-1/2” dia.Bottom: 5” dia.Designed for “TAPERED” COLM-103B-TC-68". BASE-114

Top View Top View

Top View

Top View

BASE-114AA $29.95Height: 4-1/4”Top: 2-3/4” dia. Bottom: 3-1/4” dia.Designed for tapered COLM-103AA-TC-36-1/2”.BASE-114A $44.95Height: 4-3/4”Top: 3” dia. Bottom: 4” dia.Designed for tapered COLM-103A-TC-60".BASE-114B $ 59.95Height: 5-1/2”Top: 3-5/8” dia Bottom: 5” diaDesigned for tapered COLM-103B-TC-68".

Bases are designed specifically for 3/4” round tapered columns

* All sizes are approx.- max W” x max H” x Thickness”6

Top view

BASES

BASE-117A $119.95BASE-117RA (with rosette) $134.95Height: 12-1/2”Top: 4-1/4” W x 3” DepthBottom: 7” W x 4-1/2” Depth

BASE-117A-XT $159.95BASE-117RA-XT (with rosette)$174.95Height: 13-1/4”Top: 5” W x 3-1/2” DepthBottom: 8-1/4” W x 5” Depth

BASE-117B $195.95BASE-117RB (with rosette) $219.95Height: 17”Top: 6-1/2” W x 4-3/4” DepthBottom: 10-1/4” W x 6-1/2”Depth

BASE-123B $99.95BASE-123RB (with rosette) $119.95Top collar: 4-3/4” W x 1-1/4” DBottom: 7-1/2” W x 2-1/2” D Height: 13-1/4”

BASE-123C $119.95BASE-123RC (with rosette) $129.95Top collar: 5-3/4” W x 2” D Bottom: 8” W x 3” D Height: 14”

BASE-123D $179.95BASE-123RD (with rosette) $189.95Top collar: 7-1/2” W x 3” DBottom: 10” W x 4” D Height: 15-3/4”

Top view

Matches Base MouldingMLD-320

BASE-123RB

BASE-117RA Shown withoptional rosette center and insertbase molding.

BASE-123B & BASE-123RB Were designed touse with MLD-320 as a baseboard. In this appli-cation MLD-320 was cut & put on top of granitefor a distinctive look & increased durability.

BASE-117A

* All sizes are approx.- max W” x max H” x Thickness”

BASES

7

Top View

Top View

COLM

-106A-TC-54”

BASE-117A-XT

BASE-125A-TC $39.95Height: 5-1/2”Top: 4-1/4” dia.Bottom: 6” dia.Designed for “TAPERED” column106A-TC.

BASE-125B-TC $49.95Height: 7-1/4”Top: 5-3/4” dia.Bottom: 8” dia.Designed for “TAPERED” column106B-TC.

Top View

Top View

BASE-124A-TC $129.95Height: 17-1/4”Top: 4-1/4” dia. Bottom: 4-1/2” dia.Designed for “TAPERED” column106A-TC.

BASE-124B-TC $169.95Height: 18-3/4”Top: 5-3/4” dia. Bottom: 6-3/4” dia.Designed for “TAPERED” column106B-TC.

BASE-116A-TC

BASE-116A-TC $129.95Height: 17-1/4”Top: 4-1/4” dia. Bottom: 4-3/4” dia.Designed for “TAPERED” column 106A-TC.

BASE-116B-TC $169.95Height: 21”Top: 5-5/8” dia. Bottom: 6-1/4” dia.Designed for “TAPERED” column 106B-TC.

BASE-116A $129.95Height: 15-1/4”Top: 3-1/4” dia. Bottom: 4-1/4” dia.Designed for “NON-TAPERED” column101A.

BASE-116B $169.95Height: 16-1/2”Top: 4-1/2” dia. Bottom: 6” dia.Designed for “NON-TAPERED” column101B.

CAP-134A B A S E S

BASE-125A-EXT-TC $99.95Height: 14”Top: 4-1/8” dia. Bottom: 4-1/8” dia.Designed for “TAPERED” column 106A-TC.

BASE-125B-EXT-TC $149.95Height: 17-1/2”Top: 5-3/4” dia. Bottom: 5-3/4” dia.Designed for “TAPERED” column 106B-TC.

BASE-125A-EXT-TC

Bases are designed specifically for 3/4” round tapered columns

All Resin Ornamentation is Flexible, Stainable & Paintable.

8

BASES

* All sizes are approx.- max W” x max H” x Thickness”

BASES

9

BASE-118A $139.95Width: 3-1/2”Height: 13”Thickness: 2”(USE MLD-182 OR MLD-183)

BASE-118B $179.95Width: 4-1/2”Height: 15-3/4”Thickness: 2-1/4” (USE MLD-184)

BASE-118C $219.95Width: 5-1/4”Height: 15-3/4”Thickness: 2-1/2” (USE MLD-185)

BASE-119A $69.95Width: 3-1/2”Height: 13-1/4”Thickness: 1-1/2” Top: 3-1/2" W x 1-1/2" T(USE MLD-182 OR MLD-183)

BASE-119B $89.95Width: 4-1/2”Height: 16”Thickness: 2”Top: 4-1/4" W x 2" T (USE MLD-184)

BASE-119C $109.95Width: 5-1/2”Height: 16”Thickness: 2-1/4” Top: 5-1/4" W x 2-1/4" T(USE MLD-185)

Sold as pairs

BASE-119 Creates the perfect transition between our MLD-182, 183, MLD-184 or MLD-185 door trim andthe baseboard.

Left

Top view

Right

Our exciting line of bases are specifically designed for our 3”, 4”, & 5” inch wide door casings(MLD-182, MLD-183, MLD-184, & MLD-185). These beautiful bases are a perfect match for ourdoor & entry mouldings.

BASE-122A $69.953-3/4” x 15” x 2-1/4” Top (curved) 3-1/4” W x 1-1/2” D(USE MLD-182 OR MLD-183)

BASE-122B $89.954-3/4” x 17-1/2” x 2-3/4” Top (curved) 4-1/4” W x 1-3/4” D(USE MLD-184)

BASE-122C $109.955-3/4”x 19-1/4” x 3”Top (curved) 5-1/4” W x 2-1/4” D(USE MLD-185)

B A S E S

Top view

* All sizes are approx.- max W” x max H” x Thickness”

BASES

10

BASE-120B $649.9510” Max Width46-1/4” Tall10” Max. Depth

Our 3/4” dado is designed to be used with any 3/4” trim mouldings.* See mouldings section for a listing of all patterns that are available.

BASE-121$299.95

9” Max Width46-3/4” Tall

4-1/4” Max. Depth

BASE-120A $499.957” Max Width34” Tall7” Max. Depth

BASESBASE-130 & 131 Were designed with a 3/4” dado collar. This

open dado accepts any 3/4” insert moulding for a custom & unique look tailored to your taste.

BASE-130 BASE-131

* All sizes are approx.- max W” x max H” x Thickness”11

* See mouldings section for a listing of all patterns that are available.

3/4” dado collar

BASE-130 & 131 $479.95 9-1/4” x 55”x 8” Depth

B A S E S

Optional InsertMoulding

* All sizes are approx.- max W” x max H” x Thickness”12

BASE-150AA $34.952-1/2” x 10-3/4” x 1-1/4”For 2-1/4” Width Column.BASE-150A $49.953-3/4” x 14” x 1-1/2”For 3-1/4” Width Column.BASE-150B $69.955” x 16” x 1-1/2”For 4-1/2” Width Column.

BASE-150RAA $39.952-1/2” x 10-3/4” x 1-1/4”For 2-1/4” Width Column.BASE-150RA $54.953-3/4” x 14” x 1-1/2”For 3-1/4” Width Column.BASE-150RB $78.955” x 16” x 1-1/2”For 4-1/2” Width Column.

BASE-151AA $34.952-1/2” x 9-1/4” x 1-1/4”For 2-1/4” Width Column.BASE-151A $49.953-3/4” x 14-1/2” x 1-1/2”For 3-1/4” Width Column.BASE-151B $69.954-3/4” x 17-7/8” x 2”For 4-1/2” Width Column.

BASE-200RA $79.954-1/2” x 12-3/4” x 2”For 3-1/4” Column.BASE-200RB $99.955-1/2” x 14-3/4” x 2-1/2”For 4-1/2” Column.

BASE-200A is designed foruse on desk table & pullmanheights of 28-1/2” - 32.”

BASE-200A $69.954-1/2” x 12-3/4” x 2” For 3-1/4” Column.BASE-200B $89.955-1/2” x 14-3/4” x 2-1/2”For 4-1/2” Column.

Top view Top view

BASE-106AT $109.955” x 20” x 1-1/2”For 4-1/2” Width Column BASE-106BT $149.955-3/4” x 25-3/4” x 2-1/2”For 5-1/2” Width Column.BASE-106CT $199.957-1/4” x 30-1/2” x 3-1/2”For 7” Width Column.

Top view

BASES

BASE-200B is designed for usewith 36” high applications seeour conceptual line drawingbooks for design suggestions.

BASES

13

All Resin Ornamentation is Flexible, Stainable & Paintable.

B A S E S

BASE-106AA$34.95

BASE-112AA$34.95

BASE-150AA$34.95

BASE-151AA$34.95

CB-330AA-C

2-1/4” Size Bases

BASE-150RAA$39.95

DP-201AA

COLM-130AA

BASE-150RAA

COLM-130AA isshown with

DP-201AA as a drop.

14

Columns come in 5’ and 7’ lengths

Corbels that Fit CB-310AA$34.95

CB-311AA-C$59.95

CB-330AA-C$59.95

CB-331AA-C$59.95

Bases Quick Reference GuideCapitols & Bases for 2-1/4” Width Columns

CAP-130AA$29.95

CAP-131AA$29.95

CAP-132AA$29.95

CAP-133AA$29.95

CAP-200AA$29.95

CAP-200AAShown with optional insert

SP-300AASP-301A A

optional insert for CAP-200AA$12.95

COLM-111AA-5’$69.95

COLM-111AA-7’$99.95

COLM-114AA-5’$69.95

COLM-114AA-7’$99.95

COLM-108AA-5’$69.95

COLM-108AA-7’$99.95

Capitols that Fit

DP-200AA$29.95

COLM-130AAShown with optionalOL-421AAL-S

DP-201AA$29.95

OL-421AAL-S (left)$59.95 Set of 3

OL-421AAR-S (right)$59.95 Set of 3

Sold individually or set of 3.

COLM-130AAShown with optional

DP-200AA

OL-422AA-S$59.95 Set of 3

Bases Quick Reference GuideOnlays & Drops for 2-1/4” Width Columns

15SPTC-101AA$5.95

Transition collarSee Specialties section in catalog fora complete listing of corbel options

for transition collars.SPTC-102AA

$5.95

Transition collar

Right PatternOL-421 AAR-1 2” x 8” x 1/2”$26.95

Right PatternOL-421 AAR-2 2” x 10-1/2” x 1/2”$26.95

Right PatternOL-421 AAR-3 2” x 10-1/2” x 1/2”$26.95

Left PatternOL-421 AAL-2 2” x 10-1/2” x 1/2”$26.95

Left PatternOL-421 AAL-1 2” x 8” x 1/2”$26.95

Left PatternOL-421 AAL-3 2” x 10-1/2” x 1/2”$26.95

TransitionCollar

OL-422AA-3 2” x 11” x 1/2”$26.95

OL-422AA-2 2” x 10-1/2” x 1/2”$26.95

OL-422AA-1 2” x 8-3/4” x 1/2”$26.95

COLM-130AA-5$79.95

COLM-130AA-10$149.95

B A S E S

CB-310A$69.95

CB-331AC$99.95

6 7 8 9 105

1 2 3 4

SPTC-101A$7.95Transition collar

See Specialties section in catalog fora complete listing of corbel options

for transition collars.

SPTC-102A$7.95Transition collar

CB-330AC$99.95

3-1/4” Width Columns

COLM-130A is shown with DP-200A

Bases Quick Reference GuideCapitols that fit 3-1/4” Width Columns

16

Corbels that fit 3-1/4” Width Columns

TransitionCollar

CB-311AC$99.95

Part Number 4’ Length

$79.95 $139.95$79.95 $139.95$79.95 $139.95$79.95 $139.95$79.95 $139.95$79.95 $139.95$69.95 $129.95$69.95 $129.95$69.95 $129.95

$89.95 $169.95

1. COLM-107A2. COLM-108A3. COLM-109A4. COLM-110A5. COLM-111A6. COLM-112A7. COLM-113A8. COLM-114A9. COLM-115A

10. COLM-130A

7’ Length

Part Number 5’ Length 10’ Length

CAP-130A$59.95

CAP-131A$59.95

CAP-132A$59.95

CAP-142A$59.95

CAP-144A$59.95

CAP-145A$59.95

CAP-146A$59.95

CAP-147A$59.95

CAP-143A $59.95

CAP-141AL(Low profile)$59.95

CAP-141A$59.95

CAP-143A L(Low profile)$59.95

CAP-200A$49.95

CAP-200A shown with optional

insert SP-300A

SP-301A optional insert

for CAP-200A$18.95

CAP-133A$59.95

BASE-106A$49.95

BASE-112A$49.95 BASE-150A

$49.95

BASE-150RA$54.95

OL-422A-S$69.95

OL-421AL-S (left)$69.95

OL-421AR-S (right)$69.95

DP-200A$39.95

COLM-130A-5’$89.95

COLM-130A-10’$169.95

BASE-151A$49.95

BASE-200A$69.95

COLM-130A Available in 5’ and 10’ lengths

Bases Quick Reference GuideBases that fit 3-1/4” Width Columns

BASE-200RA$79.95

DP-201A$39.95

Can be sold as individual pieces for $26.95 ea.

B A S E S

17

CB-310B$124.95

CB-311AT$159.95

CB-330AT$209.95

*CB-331AT$209.95

See Specialties section in catalogfor a complete listing of corbeloptions for transition collars.

SPTC-102B$10.95

Transition collar

CB-331AT

* *

*SPTC-101B$10.95

Transition collar

18

Corbels that fit 4-1/2” Width Columns

See TrevorSection forpart dimensions

Bases Quick Reference GuideCapitols that fit 4-1/2” Width Columns

BASE-106AT

6 7 8 9 10 11

51 2 3 4

COLM-112B

COLM-130B available in 5’ & 10’ lengths.

DP-200B

4-1/2” Width Columns

1. COLM-107B2. COLM-108B3. COLM-109B4. COLM-110B5. COLM-111B6. COLM-112B7. COLM-113B8. COLM-114B9. COLM-115B

11. COLM-130B

$89.95$89.95$89.95$89.95$89.95$89.95$89.95$89.95$89.95

$89.95

$169.95$169.95$169.95$169.95$169.95$169.95$159.95$159.95$159.95

$169.95

Part Number 4’ 8’

Part Number 5’ 10’

10. COLM-116B $89.95 $169.95Part Number 4’ 8’

CAP-145B$69.95

CAP-146B$69.95

CAP-200B$59.95

SP-301B $24.95

optional insert

SP-300B$24.95

optional insert

CAP-200Bshown with optionalinsert SP-300B

CAP-130B$79.95

CAP-131B$79.95

CAP-132B$79.95

CAP-142B$69.95

CAP-147B$69.95

CAP-143B$69.95

CAP-144B $69.95

CAP-133B$79.95

BASE-110B$19.95

BASE-112B$69.95

BASE-123RB$119.95

BASE-150B$69.95

BASE-150RB$78.95

*See Base section for part dimensions

OL-421BL-S (left)$99.95

OL-421BR-S (right)$99.95

DP-201B$49.95

COLM-130B-5$99.95COLM-130B-10$189.95

DP-200B$49.95

OL-422B-S$99.95

Sold individually or set of 3.

BASE-107B$69.95

*BASE-106AT$109.95

BASE-151B$69.95

BASE-106B$69.95

COLM-130B Available in 5’ and 10’ lengths

19

Bases Quick Reference GuideBases that fit 4-1/2” Width Columns

Can be sold asindividual piecesfor $39.95 ea.

Can be sold asindividual piecesfor $39.95 ea.

BASE-108B $69.95

BASE-111B $69.95

BASE-123B$99.95

CB-310C$169.95

* *CB-330BT$249.95

CB-331BT$249.95

BASE-106C$99.95

BASE-107C$99.95

BASE-112C$99.95

BASE-123RC$129.95

5-1/2” Width ColumnsCOLM-112C-115C-116C-130C available in 5’ & 10’ lengths. COLM-117C available in 5’ & 8’ lengths.

COLM-112C-5’$149.95

COLM-112-10’$269.95

COLM-115C-5’$119.95

COLM-115C-10’$219.95

COLM-116C-5’$149.95

COLM-116C-10’$339.95

COLM-117C-5’$119.95

COLM-117C-8’$219.95

Bases that fit 5-1/2” Width Columns

BASE-112C

COLM-112C

CAP-142C

COLM-130C-5’$114.95

COLM-130C-10’$219.95

DP-200C$69.95

* CB-311BT$249.95

BASE-106BT$149.95

BASE-123C$119.95

Column shownwith optionalCapitol and Base

20

Corbels with backing plates & built-in transition collars that fit 5-1/2” Width Columns

Bases Quick Reference GuideCapitols that fit 5-1/2” Width Columns

*See Trevor section for part dimensions

*

*See Corbels section for part dimensions

CAP-130C$129.95

CAP-131C$129.95

CAP-132C$129.95

CAP-142C$119.95

CAP-147C$119.95

CAP-143C$119.95

CAP-133C$129.95

OL-422C-S$139.95

SPTC-101C$15.95

Transition collar

OL-421CL-S $129.95

OL-421CR-S$129.95

See Specialties section in catalog for a completelisting of corbel options for transition collars.

Bedroom Closet Design

COLM-130C -5’$114.95

COLM-130C-10’$219.95

DP-200C$69.95

DP-201C$69.95

21

SPTC-102C$15.95

Transition collar

Bases Quick Reference GuideDrops & Onlays for 5-1/2” Width COLM-130C

TransitionCollar

Can be sold asindividual piecesfor $45.95 ea.

Can be sold asindividual piecesfor $49.95 ea.

B A S E S

CB-310D$179.95

CB-311CT$309.95

7”Width Columns are available in 5’ & 10’ lengths

Bases that fit 7”Width Columns

COLM-112D-5’$189.95

COLM-112D-10’$349.95

COLM-115D-5’$174.95

COLM-115D-10’$349.95

COLM-116D-5’$189.95

COLM-116D-10’$349.95

COLM-117D-5’$169.95

COLM-117D-10’$299.95

BASE-106D$129.95

BASE-107D$129.95

BASE-112D$129.95

BASE-123RD$189.95

DP-200D$89.95

COLM-130D-5’$124.95

COLM-130D-10’$229.95

BASE-107D

COLM-116D

CB-330CT$309.95

CB-331CT$309.95

* * *

*BASE-106CT$199.95

*See Base section for part dimensions

BASE-123D$179.95

22

Corbels that fit 7”Width Columns

CAP-130D

*See Corbels Section for part dimensions

Bases Quick Reference GuideCapitols that fit 7” Width Columns

CAP-130D$199.95

CAP-131D$199.95

CAP-132D$199.95

CAP-142D$199.95

CAP-147D$199.95

CAP-143D$199.95

CAP-133D$199.95

OL-422D-S$169.95

SPTC-101D$22.95

Transition collar

See Specialties section in catalogfor a complete listing of corbeloptions for transition collars.

SPTC-102D$22.95

Transition collar

COLM-130D -5$124.95

COLM-130D -10$229.95

DP-200D$89.95

OL-421DL-S $189.95

OL-421DR-S$189.95in L&R modular set

OL-421DL-S / OL-421DR-S and OL-422D-SSold individually or set of 3.

23

Bases Quick Reference GuideDrops & Onlays for 7” Wide COLM-130D

TransitionCollar

DP-201D$89.95

Can be sold as individual pieces for $69.95 ea.

B A S E S

24

BASES QUICK REFERENCE GUIDE2-1/2”Wide Round Tapered Column

2 CAPITOL DESIGNS FOR COLUMNS

3 Base Designs for COLM-103AA-TC

CAP-160AA$36.95Height: 4”Top Width: 3” Projection: 2-1/8” Bottom dimension: 1-7/8” x 1-3/8”

* All sizes are approx.- max W” x max H” x Thickness”

COLM-103AA-TC2-1/2” x 1-5/8” x 36-1/2”$79.95

BASE-113AA $39.95 3-1/4” Dia. x 5-1/2”

BASE-114AA$29.953-1/4” Dia. x 4-1/4”

BASE-126AA-TC$29.953-1/4” Dia. x 3-1/8”

36-1/2”

11” of Adjustment

CAP-103AA-TC$34.95Height: 4”Top width: 4-1/4” Projection: 2-5/8” Bottom dimension: 1-7/8” x 1-3/8”

1-1/2”

2-1/4”

TopDimensions 1-5/8”

2-1/2”

BottomDimensions

25

BASES QUICK REFERENCE GUIDE3” Wide Round Tapered Column

2 CAPITOL DESIGNS FOR COLUMNS

CAP-103A-TC$39.95Height: 4-1/4”Top width: 4-3/4” Projection: 2-3/4” Bottom dimension: 2-1/4” x 1-3/8”

CAP-160A$44.95Height: 4-1/2”Top Width: 3-3/4” Projection: 2-1/2” Bottom dimension: 2-1/8” x 1-1/2”

* All sizes are approx.- max W” x max H” x Thickness”

COLM-103A-TC-60”$129.953” x 2” x 60”

3 Base Designs for COLM-103A-TC

BASE-113A$49.954” Dia. x 7”

BASE-114A$44.954” Dia. x 4-3/4”

BASE-126A-TC$44.954-1/2” Dia. x 3-3/4”

60”

18” of Adjustment

B A S E S

1-3/4”

2-7/8”

TopDimensions

2”

3”

BottomDimensions

26

BASES QUICK REFERENCE GUIDE3-1/2” Wide Round Tapered Column

2 CAPITOL DESIGNS FOR COLUMNS

* All sizes are approx.- max W” x max H” x Thickness”

CAP-160B$59.95Height: 6-1/4”Top Width: 5” Projection: 3-3/8” Bottom dimension: 2-3/4” x 2-3/8”

BASE-113B4-3/4” Dia. x 8”$59.95

BASE-114B 5” Dia. x 5-1/2”$59.95

BASE-1154-3/4” Dia. x 5-1/4”$39.95

BASE-126B-TC5” Dia. x 4-1/2”$59.95

4 Base Designs for COLM-103B-TC-68”

COLM-103B-TC-68”3-1/2” x 3” x 68”$199.95

36” of Adjustment

68”

CAP-103B-TC$54.95Height: 5-3/8”Top width: 5-1/2” Projection: 3-3/4” Bottom dimension:2-3/4” x 2-3/8”

3”

3-1/2”

TopDimensions

3”

3-1/2”

BottomDimensions

BASES QUICK REFERENCE GUIDE4” Wide Round Tapered Columns

5 BASE DESIGNS FOR COLUMNS

COLM-106A-TC-54”4” x 3-1/8” x 54”$199.95

Bases can be stacked as shownin the examples above.

3 CAPITOL DESIGNS FOR COLUMNS

10 ” of Adjustment

54”

CAP-140A $149.95Height: 5"Top width: 4-1/4"Projection: 2-5/8"Bottom dimension: 3-1/8" x 5-5/8"

CAP-134A$169.95Height: 10-3/4"Top width: 6-1/4"Projection: 3-3/4"Bottom dimension: 3-1/8" x 5-5/8"

CAP-161A$129.95Height: 10-1/2"Top width: 7-3/4"Projection: 4-1/4"Bottom dimension: 3-1/8" x 5-5/8"

BASE-125A-EXT-TC4-1/8” Dia x 14”$99.95

BASE-116A-TC4-3/4” Dia x 17-1/4”$129.95

BASE-124A-TC 4-1/2” Dia x 17-1/4”$129.95

BASE-117A-XT8-1/4” x 5” x 13-1/4”$159.95

BASE-125A-TC6” Dia. x 5-1/2”$39.95

32” of Adjustment

74”

COLM-106A-TC-74” 4” x 3-1/8” x 74”$299.95

27

B A S E S

4”

TopDimensions

4”

Bottom Dimensions

3-1/8”

28

COLM-106B-TC-60”5-1/2” x 4-1/2” x 60”$319.95

COLM-106B-TC-84”5-1/2” x 4-1/2” x 84”$439.95

BASES QUICK REFERENCE GUIDE5-1/2” Wide Round Tapered Columns

5 BASE DESIGNS FOR COLUMNS

3 CAPITOL DESIGNS FOR COLUMNS

16 ” of Adjustment

60”

CAP-140B $219.95Height: 11-1/2"Top width: 10-1/2"Projection: 4"Bottom dimension: 4-5/8" x 3-7/8”

CAP-134B$249.95Height: 13-3/4"Top width: 8-1/2"Projection: 7"Bottom dimension: 4-5/8" x 3-7/8”

CAP-161B$219.95Height: 13-3/4"Top width: 8-1/2"Projection: 7"Bottom Dimension: 4-5/8" x 3-7/8”

BASE-117B10-1/4” x 6-1/2” 17”$195.95

BASE-125B-TC8” Dia. x 7-1/4”$49.95

BASE-116B-TC6-1/4” Dia. x 21”$169.95

BASE-124B-TC 6-3/4” Dia. x 18-3/4”$169.95

BASE-125B-EXT-TC5-3/4” Dia. x 17-1/2”$149.95

Bases can be stacked as shownin the examples above.

84”

43” of Adjustment

5-1/2”

TopDimensions

5-1/2”

Bottom Dimensions

4-1/2”

BASES

29

All Resin Ornamentation is Flexible, Stainable & Paintable.

B A S E S

BASES

30

All Resin Ornamentation is Flexible, Stainable & Paintable.