Basic In and Out UC500 with quescom

Basic In and Out UC500 with quescom

Quescom Service Config

Services

Outbound

Inbound

Objects>Foreign Gatekeeper

UC560 Configuration: CCA Config

1 Configure SIP Trunk

2 Config Telephony>Dial Plan>Outgoing Use the priority to set order and strip access code

Config Telephony>Dial Plan>Outgoing Set the outgoing CLI on the sip trunk to the extension number

Telephoney>Dial Plan> Incoming DDI to get from sip trunk to extension

Cut through Caller Configuration

Basically the UC500 stays the same, the services change on the quescom

1 add the users cli into the database

2 outgoing service split to go to quescom then gsm so can store the last caller info

3 incoming service changed to add the last caller

Call From uc560 to the quescom to add the last caller info to the table

Now Take the call from the quescom to the gsm slot

Now just change the ocalled number type to route the call to the cli stored in the cut through table