Date post: | 14-Jun-2015 |
Category: |
Engineering |
Upload: | iiit-bhubaneswar |
View: | 224 times |
Download: | 2 times |
SWITCH AND GEARS
Mechanism and connections
Presented By- A.Rajib Kumar Gupta
• In electrical engineering, a switch is an electrical component that can break an electrical circuit, interrupting the current or diverting it from one conductor to another.
• Basically switches are classified into 4 types1. SPST2. SPDT3. DPST4. DPDT
1.SPST
2.SPDT
3.DPST
4.DPDT
-make a polarity reversal switch using
DPDT
OFF CONNECTION
ON CONNECTION
ON CONNECTION(OPPOSITE POLARITY)
-make a switch to give series and parallel power
supply using DPDT
PARALLEL POWER SUPPLY CONNECTION
SERIES POWER SUPPLY CONNECTION
Make a switch connection to operate a bot for right and left turn
RELAY
MECHANISM AND USES
A relay is an electrically operated switch.
BASIC OPERATION-
(DE-ENERGIZED OFF) (ENERGIZED ON)
(PRACTICAL RELAYS)
Controlling switches through relay
How will u check the pins of a relay?
SPUR GEAR
RACK AND PINION