Basics About Indoor Air Quality Products in

Chelan WABrought to you by: www.cascademechanical.com

Basics About Indoor Air Quality Products in Chelan WA

You can improve the quality of air inside your house using indoor air quality products. It can be polluted by indoor pollution sources which release particles or gases in the air.

If your house does not have adequate ventilation, the level of indoor pollutants may increase since less air from outside will be entering the house to dilute emissions that are generated by the indoor air pollutants.

Basics About Indoor Air Quality Products in Chelan WA

Your house can also be contaminated as a result of high humidity levels and temperatures.

When selecting the indoor air quality products, you need to put in mind their efficiency. The best ones are those that have a Green guard indoor quality certification that gives assurance that the products are meant to be used in indoor spaces,

Basics About Indoor Air Quality Products in Chelan WA

they meet strict chemical emission limits and they will contribute to creation of a healthier house.

Green guard certification uses performance-based standards in defining products as well as processes with low chemical and particle emissions which are suitable to be used in the house.

Basics About Indoor Air Quality Products in Chelan WA

The standards are implemented during the building of the products and their finishes, when building interior furnishings, furniture, and electronic equipment as well as cleaning products.

The standards determine the test methods, transmission levels that are allowed, toxicity limits and also the acceptance of the products.

Basics About Indoor Air Quality Products in Chelan WA

Before the indoor air quality products are released into the market for sale, they are tested in dynamic environmental chambers using appropriate methods.

There are methods that are used for testing cleaning products and electronic equipment while others are used for testing building materials, furniture and finishes.

Basics About Indoor Air Quality Products in Chelan WA

The products are measured for the chemical and particle emission levels while simulating actual product use. Furnishings and other building materials should be able to meet the required emission levels between 7 to 14 days of their installation.

For other products and processes such as cleanings systems and operating electronics,

Basics About Indoor Air Quality Products in Chelan WA

they have to meet the needed levels during normal use.

The importance of any indoor air quality product will depend on the amount of the pollutant it removes from the house and how dangerous that emission is. An effective indoor air quality product should be able to clean air inside your house even if the source of the emission is old or not properly maintained.

Basics About Indoor Air Quality Products in Chelan WA

There are those sources that release air pollutants either more or less continuously, for instance furnishings, building materials, household products such as air fresheners and furnishings.

There are others that release air pollutants intermittently, especially those that are related to activities that go on within the home like use of malfunctioning stoves, smoking,

Basics About Indoor Air Quality Products in Chelan WA

use of solvents for cleaning and use of cleaning products for house-keeping.

If you don't use indoor air quality products, pollutants can accumulate in your house to a level that cause health as well as comfort problems. A good home should be built with special mechanical means that will allow ventilation and reduce the number of pollutant levels.

Basics About Indoor Air Quality Products in Chelan WA

For more information on the best indoor air quality Chelan WA, Check out my website at cascademechanical.com

Basics About Indoor Air Quality Products in

Chelan WABrought to you by: www.cascademechanical.com