21
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com Battery Maintenance Should be done EVERY 2 Years
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Battery Maintenance
Should be done EVERY 2 Years
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Battery Box Located Outside on S.S.
Enclosure and Inside Enclosure Poly Fiber
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Note Indicator Light
Location
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Power Off The N-300
w/Toggle Switch
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Remove the Four Screws
That Hold The Cover on.
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Disconnect The Battery Cable From
The Charger Module
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Inspect All Connections for Corrosion
and Good Connections
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
If Any Corrosion is Found, All Corroded
Components Must Be Replaced
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Remove all (8) Screws that Secure
the Batteries in the Enclosure
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Remove Both Sets of
Cells Together
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Prepare new Components, Attach Cable
Assy. To Battery Terminals (red +, black -)
Battery to
Charger
Module
Cable P/N
G2-0030
Battery P/N E3-1006
Includes Fusible Link
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Place Battery Assembly Into The
Battery Enclosure
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Reinstall ALL (8) Screws
That Secure The Battery
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
The Battery Fusible Link Must Be
Connected to The Battery Terminals on
One Side of The Battery
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Connect the Battery Charger Module to The
Battery Cable attached to The Other Side of
the Battery
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Push The Battery Fusible Link
Connected to The Battery into the Void
Around The Battery Cells
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Re-Install Battery Cover Making Sure the
Charge Indicator Lens is Aligned with the
Indicator Lamp.
© 2014 YZ Systems for use by YZ’s distribution network and end-users. www.yzsystems.com
Power On The N-300
w/Toggle Switch
