BBAATTTTEERRYY...

Tel: +44 (0)1189-820 911

www.avantipowerrepairs.co.uk

[email protected]

BBAATTTTEERRYY CCHHAARRGGEERRSS

Follow us on Subscribe to our Newsletter

http://www.avantipowerrepairs.co.uk/

mailto:[email protected]

INTRODUCTION

Avanti Power Repairs was founded in 1996, as a company we have steadily expanded to meet the demand

of our customers and will continue to do so with the ever increasing and changing demands of the industry.

We specialize in the manufacture, design and distribution of switch mode, and more recently linear power

supplies. Our range is extensive starting at a low 5 watts and going through to 2000 watts. We also offer

these units in both single and multi outputs, covering a vast range power supplies for every need, the

majority of which have full universal input

Avanti Power Repairs is working to the highest quality standards (ISO9001) in providing advice and

services based solely on your requirements. We pride ourselves on being flexible in dealing with your needs

and will provide you a service that is second to none. With a skilled and dedicated workforce, this

workforce will ensure that all the product information you require is available with the least delay to you as

is possible.

If you do not find a product within our catalogue that meets your requirements please contact our technical

sales team, at one of the addresses or numbers below, who will be more than capable of helping you find a

unit to meet your needs. Our full research and development capability will allow you initial design concept

to be seen through to a fully documented finish project.

““WWiitthh tthhee PPoowweerr ttoo hheellpp yyoouu””

BBAATTTTEERRYY CCHHAARRGGEERRSS

BATTERY CHARGERS FOR VIRTUALLY EVERY NEED

We offer a wide range of battery chargers 6V and 12V Sealed Lead Acid (SLA) that provide

intelligent and automatic charge functions as two stage Three stage, dual stage and constant voltage

options.

Battery Chargers suitable for charging vehicles ranging from motor cycles to trucks, marine

applications, leisure vehicles such as caravans and household appliances.

Not what you were looking for? Just give us a call.

INDEX

Page Model Power Watts

1 GS15A Series 12 – 15W

2 GS15B Series 7 – 15W

3 DRC-40 Series - UPS Function 40W

4 BCAD12-4-U 48W



7 PSC-100 Series 100W

8 PSC-100C Series 100W

9 PA-120 C Series 99 – 121W

9 PA-120 P Series 99 – 121W

11 PB-120 C Series 99 - 121W

11 PB-120 P Series 99 - 121W

10 ESC-120 Series 108W

10 GC120 Series 102 - 120W

12 PSC-160 Series 160W

13 PSC-160-C Series 160W

14 GC220 Series 184 - 218W

14 ESC-240 Series 216W

15 PB-230 230W

15 PB-300P Series 300W

16 GC330 Series 330W

17 PB-360P Series 360W

18 HEP-600C Series 600W

19 PB-600 Series 600W

20 PB-1000 Series 1000W

21 Cables

AAAvvvaaannntttiii PPPooowwweeerrr RRReeepppaaaiiirrrsss LLLtttddd

GS15A Series - 7.2~15W AC-DC Single Output Desktop Power Supply

Features

Universal AC input/Full range

No load power consumption <0.3W

ErP step2 compliant

Meet EISA 2007 (Energy independence and security act)

3 pole AC inlet IEC320-C14

Class I power (with earth pin)

Protections: Short circuit/Overload/Over voltage

Pass LPS

Part Number Voltage Current Power R&N Efficiency

GS15A-1P1J 5V 2.4A 12W 50mV 75%

GS15A-11P1J 7.5V 1.6A 12W 80mV 78%

GS15A-2P1J 9V 1.66A 15W 80mV 80%

GS15A-3P1J 12V 1.25A 15W 80mV 80%

GS15A-4P1J 15V 1A 15W 100mV 80%

GS15A-5P1J 18V 0.83A 15W 120mV 81%

GS15A-6P1J 24V 0.62A 15W 150mV 83%

GS15A-8P1J 48V 0.31A 15W 240mV 85%

Description

The GS15A series is a fully enclosed adapter with universal AC input/full range. Standard functions include no load

power consumption <0.3W, ErP step2 compliant, 3 pole AC inlet IEC320-C14 and protections including short

circuit, overload and over voltage.

Page 1


GS15B Series - 7.2~15W AC-DC Single Output Desktop Power Supply

Features

Universal AC input / Full range


Meet energy star level IV(CEC) for 5 ~ 48V

Meet EISA 2007 (Energy Independence and Security Act) for 5 ~

48V


Full output 3~48V safety approval

Protections: Short circuit / Overload / Over voltage

Pass LPS


GS15B-0P1J 3.3V 2.18A 7.2W 50mV 55%

GS15B-1P1J 5V 2.4A 12W 50mV 65%

GS15B- 11P1J 7.5V 1.6A 12W 80mV 72%

GS15B-2P1J 9V 1.66A 15W 80mV 74%

GS15B-3P1J 12V 1.25A 15W 80mV 76%

GS15B-4P1J 15V 1.25A 15W 100mV 77%

GS15B-5P1J 18V 0.83A 15W 120mV 78%

GS15B-6P1J 24V 0.62A 15W 150mV 80%

GS15B-8P1J 48V 0.31A 15W 240mV 81%

Page 2


DRC-40 Series - 40W Single Output Switching DIN RAIL with UPS Function

Applications

Alarm systems

Security systems

Access systems

UPS systems

Central monitoring systems

Emergency lighting systems

Feature

Universal AC input

Secondary output for battery charging (UPS Function)

Battery low protection/Battery polarity protection by fuse

Alarm signal for AC OK and Battery low

Can be installed on DIN rail TS-35/7.5 or 15

Short circuit, over load, over voltage protections

Cooling by free air convection

LED indicator for power on

3 years warranty


DRC-40A -

UPS Function

13.8V 1.9A 40W 120mV 86%

13.8V

1A

DRC-40B -

UPS Function

27.6V 0.95A 40W 200mV 87%

27.6V 0.5A

Description

DRC-40 Series are a range of 40W DIN Rail power supplies with secondary charger output, for use as the power

supply for backup batteries, in security access systems. The range is of fanless design, has a 90-264VAC input

range, efficiencies up to 87% and air convection cooled operating temperatures of -30C to +70C. DRC-40 Series

consists of a 13.8V and 27.6V model both of which have a respective lower current charger output; the units also

include an alarm signal for AC OK and battery low. Other functions include short circuit protection, overload

protection, over voltage protection, battery low cut off, battery reverse polarity protection by fuse, and front panel

DC voltage adjustment. DRC-40 are also certified to UL, CUL, CB, TUV, CE safety regulations and meet the

requirements of IEC60950-1 Limited Power Source (LPS)

Page 3


BCAD12-4-U - 12V 4A Car Battery Charger

Applications

Car Batteries

Golf Carts

Electric Wheelchairs

Features

Regulated Constant Voltage

Automatic Switching From Cycling To Floating

ABS Shock-Proof Type BC8 Case

Double Insulation

Dimensions

184 x 112 x 86 mm

Part Number Voltage Current Power

BCAD12-4-U 12V 4A 48W

Description

Automatic charger for 12 V car batteries up to 60 Ah. Battery is connected with the charger via crocodile clips;

Indication of charging status during charging process (WU-characteristic curve); Automatic termination of charge

when charging process is completed; Indication of current charging status of the battery when mains plug is not

plugged in while battery is connected; Charging current of 4 A

Page 4


DRC-60 Series - 60W Single Output Switching DIN RAIL with UPS Function

Applications

Alarm systems

Security systems

Access systems

UPS systems



Features

Universal AC input

Secondary output for battery charging (UPS Function)

Battery low protection/Battery polarity protection by fuse

Alarm signal for AC OK and Battery low





3 years warranty


DRC-60A 13.8V 2.8A 60W 120mV 86%

13.8V 1.5A

DRC-60B 27.6V 1.4A 60W 200mV 87%

27.6V 0.75A

Description

DRC-60 series are a range if 60W single output power supplies with battery charger output, designed to be

mounted on TS-35/7.5 or TS-35/15 DIN rails. In addition to the primary output, an additional lower current

charger output is included for use along with an external battery (not included) within security systems with DC

UPS function. DRC-60 Series have a 90-264VAC full range input and consists of two models at 13.8Vdc and

27.6Vdc. The series is designed without a built-in fan, and the working efficiency is up to 88% so that every model

can work at the ambient temperature -30~+70℃ under free air convection. Both models have relay contact to

provide the AC OK and battery low alarm signals. Other standard functions include short circuit protection,

overload protection, over voltage protection, battery low cut off, battery reverse polarity protection by fuse, and

front panel DC voltage adjustment. DRC-60 Series are certified with UL, CUL, CB, TUV and CE safety regulation

and meet the requirement of IEC60950-1 Limited Power Source (LPS.)

Page 5


DRC-100 Series - 100W UPS Function DIN Rail Power Supplies

Applications

Security systems

Alarm systems

DC UPS systems

Access systems



Features

Universal AC Input

Alarm signal, via relay, for AC OK and battery low

Battery low protection & battery reverse polarity by fuse

Short circuit, over load and over voltage protections


Wide range -30Â°C to +70Â°C working temperature




DRC-100A 13.8V 4.5A 96.6W 120mA 87%

13.8V 2.5A

DRC-100B 27.6V 2.25A 96.6W 240mA 89%

27.6V 1.25A

Description

DRC-100 Series is designed to meet the high power requirements of the security industry, providing 100W of high

reliability DIN rail power. Designed to be assembled on TS-35/7.5 or TS-35/15 industrial rails inside cabinets

DRC-100 series have 90-264VAC input range and offer dual 13.8VDC or 27.6VDC output voltage models, ideal

for use with 12V and 24V batteries. With efficiency up to 89% the units can operate with air convection cooling at

temperatures from -30Â°C through to +70Â°C. Protection features over load, over voltage, battery low cut off and

fused battery reverse polarity protection; the units also have alarm signal for AC OK and battery low signalling, via

relay contact output.

Page 6


PSC-100 Series - 100W AC/DC Single Output Open Frame with UPS Function Battery Charger

Applications

Security systems

Access control systems


Alarm systems

UPS systems


Features

90-264VAC Universal AC input


Battery low protection / Battery polarity protection by fuse

Relay contact signal output for AC OK and Battery low


100% full load burn-in test

5"x3" compact size


PSC-100A 13.8V 4.75A 100W 100mV 86%

13.8V 2.5A

PSC-100B 27.6V 2.4A 100W 100mV 88%

27.6V 1.25A

Description

PSC-100 Series is a 100W AC/DC PCB type open frame power supply with additional charger output, designed

primarily for the security industry. The product features 90-264VAC Universal AC input voltage, 13.8V and 27.6V

output options and short circuit, over load and over voltage protections. PSC-100 Series has been designed with

battery low protection, battery polarity protection, via fuse, and relay contact signal output for AC OK and Battery

low making it ideal for security systems.

Page 7


PSC-100C Series - 100W AC/DC Single Output Enclosed with UPS Function Battery Charger

Applications

Security systems



Alarm systems

UPS systems


Features







5"x3" compact size


PSC-100A 13.8V 4.75A 100W 100mV 86%

13.8V 2.5A

PSC-100B 27.6V 2.4A 100W 100mV 88%

27.6V 1.25A

Description

PSC-100C Series is a 100W AC/DC enclosed power supply with additional charger output, designed primarily for

the security industry. The product features 90-264VAC Universal AC input voltage, 13.8V and 27.6V output

options and short circuit, over load and over voltage protections. PSC-100C Series has been designed with with

battery low protection, battery polarity protection, via fuse, and relay contact signal output for AC OK and Battery

low making it ideal for security systems.

Page 8


PA-120 C Series - 120W Pulse Charge Desktop Battery Charger

Features

AC input range selected by switch

Built-in passive PFC function compliance to EN61000-3-2

With AC ON-OFF switch

3 poles AC inlet with fuse holder

Short circuit, over load, over voltage, over temperature

protections

Charger type can be selected (optional)

Charger for Lead Acid Batteries

2 colour LED loading indicator

Open frame available

Low cost, High reliability

Part Number Voltage Current Power Efficiency

PA-120P-13C 14V 7.2A 99.36W 73%

PA-120P-27C 28V 4.3A 119W 79%

PA-120P-54C 55.2V 2.2A 121.44W 79%

PA-120P Series – 120 Pulse Charge Open Frame Battery Charger

Features



Protections: Short circuit/Over load/Over voltage/Over

temperature

Charger type can be selected(Optional)

Charger for lead-acid batteries



Part Number Voltage Current Power Efficiency PA-120P-13P 14V 7.2A 99.36W 73% PA-120P-27P 28V 4.3A 119W 79% PA-120P-54P 55.2V 2.2A 121.44W 79%

Page 9


PB-120 C Series - 120W 2 Stage Desktop Battery Charger

Features






protections




Open frame available



PB-120P-13C 14V 7.2A 99.36W 73%

PB-120P-27C 28V 4.3A 119W 79%

PB-120P-54C 55.2V 2.2A 121.44W 79%

PB-120 P Series - 120W 2 Stage Open Frame Battery Charger

Features





Short circuit, over load, over voltage, over temperature protections




Enclosed external version available


Part Number Voltage Current Power Efficiency PB-120P-13P 14V 7.2A 99.36W 73% PB-120P-27P 28V 4.3A 119W 79% PB-120P-54P 55.2V 2.2A 121.44W 79%

Page 10


ESC-120 Series – 108W Desktop SLA Battery Charger

Features



temperature

Battery under/Over voltage and polarity protections(ESC only)

Forced air cooling by built-in DC fan(240V only)

Fixed switching frequency at 25KHz

3 color LED loading indicator

Dimensions 150 x 140 x 86mm


ESC-120-13-5 14V 8A 108W 120mV 81%

ESC-120-27 27V 4A 108W 150mV 83%

ESC-120-54 54v 2A 108W 400mV 84%

GC120 Series - 120W Single Output Battery Charger

Feature

2 stage charging characteristics


Built-in active PFC function, PF>0.97



Protections: Short circuit/Overload/Over voltage/Over temp

Fully enclosed plastic case

2 colour LED indicator for charging status

Part Number Voltage Power Efficiency

GC120A12-R7B 13.6V 102W 86.5%

GC120A24-R7B 27.2V 120.2W 90%

GC120A48-R7B 54.4V 120.2W 91%

Page 11


PSC-160 Series - 160W AC/DC Single Output Open Frame with UPS Function Battery Charger

Applications

Security systems



Alarm systems

UPS systems


Features


Built-in Active PFC function






6"x3" compact size


PSC-160A 13.8V 7.6A 160W 100mV 86%

13.8V 4A

PSC-160B 27.6V 3.8A 160W 100mV 88%

27.6V 2A

Description

PSC-160 Series is a 160W AC/DC PCB type security power supply with 6â€�x3â€� footprint, allowing a

universal input range between 90VAS and 264VAC and incorporating a built-in PFC function. In addition to the

primary output there is a charger output that provides the backup power supply application required by access and

security systems. PSC-160 Series delivers up to 90% high efficiency and can operate with air convection at

temperatures of -30C through to 70C. This series is designed with thorough alarm features, including AC OK and

battery low signalling; there is also a relay contact provided to facilitate user system design.

Page 12


PSC-160-C Series - 160W AC/DC Single Output Enclosed with UPS Function Battery Charger

Applications

Security systems



Alarm systems

UPS systems


Features


L-bracket base and cover to enclose

Built-in Active PFC function






6"x3" compact size


PSC-160A 13.8V 7.6A 160W 150mV 88%

13.8V 4A

PSC-160B 27.6V 3.8A 160W 240mV 90%

27.6V 2A

Description

PSC-160-C Series is our standard 160W AC/DC PCB type security power supply, with 6â€�x3â€� footprint, but

fitted with an l-bracket and cover to encase the unit. The power supply has a universal input range between 90VAC

and 264VAC and incorporates a built-in PFC function. In addition to the primary output there is a charger output

that provides the backup power supply application required by access and security systems. PSC-160-C Series still

delivers up to 90% high efficiency and can operate with air convection at temperatures of -30C through to 70C.

This series is designed with thorough alarm features, including AC OK and battery low signalling; there is also a

relay contact provided to facilitate user system design.

Page 13


GC220 Series - 220W AC-DC Single Output 2 Stage Battery Chargers

Feature

2 stage charging characteristic


Built-in active PFC function, PF>0.91

No load power consumption <1W


Class I power ( with earth pin)


protections


2 colour LED indicator for charge status

Approvals: UL / CUL / TUV / CB / FCC / CE


GC220A12-R7B 14V 14A 184W 89%

GC220A24-R7B 27.2V 8A 218W 92.5%

GC220A48-R7B 54.4V 4A 218W 93%

Description: GC220 Series are a range of 220W Class I power 2 stage battery chargers with built in active PFC

function. Featuring low no load power consumption and high efficiency, up to 93% these battery chargers fulfil the

energy saving and environmental requirements of many new builds.

ESC-240 Series – 216W Desktop SLA Battery Charger

Features



temperature

Battery under/Over voltage and polarity

protections(ESC only)

Forced air cooling by built-in DC fan(240V only)

Fixed switching frequency at 25KHz



ESC-240-13-5 14V 16A 216W 120mV 81%

ESC-240-27 27V 8A 216W 150mV 84%

ESC-240-54 54V 4A 216W 400mV 85%

Page 14


PB-230 Series 230W Single Output Battery Charger

Features

3 Stage charging characteristic

University AC input

Built in active PFC Function

Short Circuit, Over Voltage, Over Voltage Protection

Built-in cooling fan ON-OFF control

Built-in remote ON-OFF control


Low cost, high reliability


PB-230-48 14.4V 4A 230W 86%

PB-230-48AD1 14.4V 4A 230W 86%

PB-230-24 28.8V 8A 230W 86%

PB-230-24AD1 28.8V 8A 230W 86%

PB-230-12 57.6V 16A 230W 82%

PB-230-12AD1 57.6V 16A 230W 82%

PB-300P Series – 300W PFC Single Output Battery Charger

Applications

Household appliances

Leisure vehicles

Features

3 stage charging

AC 115/230VAC selected by switch

Built-in passive PFC function compliance to EN61000-

3-2 Class A (option)

Protection: Reverse Polarity/Short circuit/Over

voltage/Over temperature





PB-300P-24 28.8V 10.5A 300W 86%

PB-300P-12 14.4V 21A 300W 85%

Description

Designed for lead acid batteries featuring 3 stage charging characteristics and the automated derating capability for

charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your

hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-300 can

comply with the harmonic requirements of EN61000-3-2 & equiped with an IEC320 C14 AC Inlet and ON/OFF

switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design

also solves a lot of installation troubles and space issues.

Page 15


GC330 Series - 330W Single Output Battery Charger

Applications

Security systems

Leisure vehicle

Office/commercial equipments

Features

2 Stage charging characteristic


Built-in active PFC function, PFC>0.95

3 Pole AC inlet IEC320-C14

Class I power (with earth pin)



No load power consumption <1W

2 colour LED indicator for charging status

Part Number Voltage Efficiency

GC330A36-C4P 40.8V 93.5%

GC330A48-C4P 54.4V 93.5%

Description

The GC330 series is an AC/DC battery charger possessing very low "no load power consumption" and up to

93.5% of high efficiency. Offering a two stage charging curve (constant current and constant voltage) and can

monitor the battery capacity by detecting the battery voltage. The device can quickly charge the battery at constant

current mode in a low battery capacity statues and then, when the battery bank becomes full, the charger can

automatically turn into constant voltage mode with slight charging current to avoided lifetime reduction caused by

over charging.

Page 16


PB-360P Series – 360W PFC Single Output Battery Charger

Applications

Household appliances

Leisure vehicles

Marine applications

Features

3 stage charging

AC 115/230VAC selected by switch


Class A (option)

Protection: Reverse Polarity/Short circuit/Over

voltage/Over temperature



FAN on/off control(Depends on charging current)


PB-360P-24 24V 12.5A 360W 86%

PB-360P-12 12V 24.3A 360W 85%

Description

Designed for lead acid batteries featuring 3 stage charging characteristics, automated derating capability for

charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your

hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-360 can

comply with the harmonic requirements of EN61000-3-2. Equipped with an IEC320 C14 AC Inlet and ON/OFF

switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design

also solves a lot of installation troubles and space issues. With reverse polarity, short circuit, overload, over voltage

and over temperature protections it is ideally suited as a main power source or back up system.

Page 17


HEP-600C Series - 600W Single Output Harsh Environment Battery Chargers

Applications

Suitable for battery charging in harsh environments

Robotic lawn mowers

Electronic transportation vehicle

Recreational craft, personal yacht or workboat Security network and system

Telecommunication base station

Equipments or instruments with back-up battery

Features

3 stage charging

Universal AC input / Full range (up to 305VAC)

Built-in active PFC function

No load power consumption <0.5W at remote OFF

High efficiency up to 95%

Aluminium case and filling with heat-conducted glue

-40 ~ +70℃ wide operating range

Withstand 5G vibration test

Short circuit, Over voltage, Over temperature

protections

Fanless design, cooling by free air convection



5 years warranty on approved installations

Part Number Voltage Current Battery Capacity

(Amp Hours Min)

Battery Capacity

(Amp Hours Max)

Efficiency

HEP-600C-12 13.6V 35A 135Ah 400Ah 93.5%

HEP-600C-24 27.2V 21A 70Ah 210Ah 94.5%

HEP-600C-48 54.4V 10.5A 35Ah 105Ah 95.5%

Description

HEP-600C series is an AC-to-DC battery charger providing power up to 600Watts, designed with aluminium case

and fully potted by silicone for waterproof capabilities. It features up to 95.5% high efficiency and <0.5Watt low

no-load power consumption at remote OFF. Incorporating state of the art design, the fan-less HEP-600C is capable

of working under high-vibration (5G), dusty, humid and oily environments. Other features include adjustable

voltage/current and wide working temperature range of -40~+70.

Page 18


PB-600 Series – 600W Intelligent Single Output Battery Charger

Applications

Electric motorcycles

Solar power systems

Security systems

UPS systems

Electric wheelchairs

Leisure vehicles

Feature

2/8 stage charging

Built-in active PFC function PF>0.95

Protection: Reverse Polarity / Short circuit / Over voltage /

Over temperature



Built in Remote On/Off control



PB-600-48 48V 10.5A 600W 89%

PB-600-24 24V 21A 600W 87%

PB-600-12 12V 40A 600W 86%

Description

An intelligent 600W AC/DC battery charger for lead acid batteries with selectable 2 stage/8 stage charging

characteristics. Features include built in temperature compensation circuit, PFC function, remote ON/OFF control,

fan ON/OFF control, reverse polarity, short circuit, over-voltage, and over temperature protections.

Page 19


PB-1000 Series 1000W Intelligent Single Output Battery Charger

Applications

Home appliances

Solar power system

Security system

UPS system

Electrical wheelchair

Leisure vehicle

Controlled by microprocessor

2/8 stage charging selectable on output panel


Built-in active PFC function PF>0.95

Protection: Reverse Polarity / Short circuit / Over voltage /

Over temperature



Built in Remote On/Off control

2-Bank charger



PB-1000-48 48V 17.4A 1000W 89%

PB-1000-24 24V 35A 1000W 88%

PB-1000-12 12V 60A 1000W 86%

Description

An intelligent 1000W AC/DC battery charger for lead acid batteries with selectable 2 stage/8 stage charging

characteristics. Up top 2 battery banks can be connected to PB-1000 at the same time. Features include built in

temperature compensation circuit, PFC function, remote ON/OFF control, fan ON/OFF control, reverse polarity,

short circuit, over-voltage, and over temperature protections.

Page 20


IEC320 C13 to 3 Pin USA Plug Mains Lead

Part Code Cord Type Length

YP12-YC12 SVT 3 core, 18AWG 2 meters, typically

YP22-YC12 - IEC320 C13 to Shuko Euro Plug Mains Lead, 2 Metre

Part Code Cord Type Length Connector

YP22-YC12 0.73mm 3 core, H05W 2 meters SW903

UK-IEC-2M - IEC320 C13 to 5A UK Plug Mains Lead


UK-IEC-2M 3183Y 3 core 0.75² 2 meters, typically

PC032 - IEC320 C7 to Flat USA Plug Mains Lead, 2 Metre


PC032 0.75mm x 2 core flat HO3 2 metres SW902

PC026W - IEC320 C7 to Flat Euro Plug Mains Lead, 2 Metre


PC026W 0.75mm x 2 core flat HO3 2 metres

PC136 - IEC320 C7 to UK Plug Mains Lead, 2 Metre


PC136 0.75mm x 2 core flat HO3 2 metres SW902

YP60-YC14 - IEC320 C5 to UK Plug Mains Lead, 1.8 Metre


YP60-YC14 0.75mm x 2 core flat HO3 1.8 metres

YP22-YC14 - IEC320 C5 to Shuko Euro Plug Mains Lead, 1.8 Metre


YP22-YC14 0.75mm x 2 core flat HO3 2 metres

YP12-YC14 - IEC320 C5 to USA Plug Mains Lead, 1.8 Metre


YP12-YC14 0.75mm x 2 core flat HO3 2 metres

Page 21

AVANTI POWER REPAIRS LTD 35A Rowan Road, Tadley

Hampshire, RG26 3RQ, England

Tel: +44 (0)1189-820 911

www.avantipowerrepairs.co.uk

[email protected]

http://www.avantipowerrepairs.co.uk/

mailto:[email protected]

Date post:	11-Sep-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

BBAATTTTEERRYY...

Documents