11
• What is BPP doing? • Solutions • Contacts
• What is BPP doing?
• Solutions
• Contacts
Boxon Packaging Projects AB
Specialised in packaging solutions for the Manufacture industry
We develop packaging solutions for customers in Europe that will contribute to lower the total cost
in your Supply Chain…
Packaging on your terms
Boxon Packaging Projects ABSupply chain analyse
Design & Construction
Tooling
Production
Recycling
Customer
Sales Boxon support
Net work of partners and suppliers
Analyses & Engineering
Together with a close cooperation with our partners we are able to give a complete development work for packaging projects including supply chain analyses. Having control of the whole chain from product design, tooling manufacturing to an efficient production and with the full support from the Boxon organisation we are able to deliver the projects with short lead times and high service level.
TRIP COST ANALYSE FOR A FLOW
We always starting up a new case by making a trip cost analyse for a flow. Measuring for different packaging alternatives evaluating:
• Packaging cost
• Transport cost
• Handling
• Administration
The total trip cost per sent part gives a good base for taking the right decision for the packaging investments.
TOTAL TRIPCOST PER PART
0,00 EUR
0,10 EUR
0,20 EUR
0,30 EUR
0,40 EUR
0,50 EUR
0,60 EUR
ALT 1 ALT 2 ALT 3 ALT 4 ALT 5 ALT 6
HANDLING PLANT
HANDLING LSC
TRANSPORT INBOUND
WASHING COST
RETURN TRP (OUTBOUND)
CONTAINERS (PACK. COST)
TRAY COST (INCL. TOOLING)
With our knowledge about engineering, analyses and production techniques we are able to deliver an alternative solution that will be something outside
the normal standard and a good potential to save money.
C-KLTGalia box
More parts/packaging units means:
1. Lower packaging material cost2. Better transport utilisation3. Less packaging to handle4. Space in warehouse and production5. A positive environmental impact
The single most important variable for lowering total cost in the supply chain is packaging filling ratio.…..
2. OPTIMISING FILLING RATIO
We have proved in many cases that we with our special packaging solutions are able to increase the filling ratio with more than 50% on a pallet .
FRAME TRAYS
• Parts packed in expandable or durable injection moulded trays. Parts secured from movements and no weight transformation through parts.
• Together with lids handling units are packed similar to standard boxes but with a dramatic increase of filling ratio.
1. IS STANDARD PACKAGING NEEDED?
• Parts packed in a very secure way (with or without external packaging)
• Normally gives an increased number of parts per pallet
• Nestable trays gives efficient return shipments
• Makes the handling easier for the operators
INJECTION MOULDED FULL PALLET SIZED TRAYS
• Boxon developed and supplied an injection moulded collapsible box
• Benefits: one trip with the durable box is around 30% lower that the cost for card board
RETAIL DISTRIBUTION: LINDEX CASE
NESTABLE PLASTIC LOADING PLATFORM & LID
“…….using this type of nestable plastic pallet it would
mean that instead of 5 delivered full truck loads of wooden
pallet you would get one truck with clean pallets that is very
optimal for storage and distribution.”
Contacts Sweden
Tobias Rasmusson
General manager
Fon: + 46 42 25 07 72Mob: + 46 707 7187501
Fax: + 46 42 20 18 18
Germany /Austria
DI Johannes Gorbach
Sales Area Manager
6714 Nüziders, ÖSTERREICH,
Fon: +43 664 3448 220 / Fax: +43 5552 62318
Injection moulded Frame Trays will replace the outside packaging
and increase the filling ratio dramatically
1. IS STANDAD PACKAGING NEEDED
Vaccum + KLT
• 4 x 5 parts per tray
• 4 tray in height (weight)
• 16 KLT per pallet
1 280 parts per pallet
Frame trays
• 5 x 6 parts per tray
• 96 trays per pallet
2 880parts per pallet
R-KLT 6429
