Date post: | 31-Dec-2015 |
Category: |
Documents |
Upload: | ross-garrison |
View: | 214 times |
Download: | 2 times |
+
Freedom in
endodonticsCOMPATIBLE WITH ALL MAJOR FILE MANUFACTURERS. ACCESS TO FUTURE ENDODONTICS INSTRUMENTS INNOVATIONS.
The I-Endo dual is the first unit having an encoder coupled with an accurate micro-motor.
This patented encoder calculates an algorithm ensuring:
- In rotating mode high speedspeed accuracy.
- In reciprocating (F+R) mode an exact angle measurement angle measurement for:
- Evaluating the angular position with tolerance limits under 1°,
- Getting the best performances for each file system.
SATELEC SATELEC ExclusivityExclusivity
Encoder
256 positions analyzed
Signal
Analysis of:128 positions (forward)128 positions (reverse)
SATELEC ExclusivitySATELEC Exclusivity
Precision and rapidityPrecision and rapidity
Versatile, complete, light and compact, the I-ENDO dual
offers
a new vision of endodontics.
EncoderThe encoder calculates an algorithm for greater precision,
Integrated calibration systemThe integrated calibration system checks the contra-angle’s mechanical inertia for a perfect micro-motor/contra-angle adjustment.
MicroprocessorAdvanced microprocessor for an extremely short response time.
Freedom in endodonticsFreedom in endodontics
Rotating movement
Reciprocating movement
Both modes are compatible with all systems and files
from all major suppliers. All parameters can be
easily modified to have access to future endodontics
instruments innovations. Vers
ati
lV
ers
ati
lee
Freedom in endodonticsFreedom in endodontics
10 customizable automatically saved programs available in each 10 customizable automatically saved programs available in each mode.mode.
Ratio 5 contra-angle ratio settings (1:1 ; 6:1 ; 16:1 ; 20:1 ; 32:1)
SpeedSpeed without contra-angle: 1000 to 10 000 RpmSpeed with a 16 :1 contra-angle: 100 to 600 RpmSpeed with a 6 :1 contra-angle: 150 to 1660 Rpm
TorqueTorque with a 16:1 contra-angle: 0.5 to 10 Ncm (MAX)Torque with a 6:1 contra-angle : de 0.5 à 4.1 Ncm (MAX)
FWD° REV°Dedicated to reciprocating (F+R) modeAdjustment from 10° à 360° in forward and in reverse motion
Large choice of torque, speed and ratios settings to fit with all
manufacturers specifications.
A LCD back lighted display offers higher visibility for instantaneous recognition of micromotor status and
settings.
Pre-settings: Recommanded settings:
(ex. using ProTaper S1) CA = 16:1
Rpm = 250 Torque = 4.0 Ncm
Rotating movementRotating movement
With « Rotating Movement » the torque could be with a 16:1 contra-angle:
Conventional settings ( ex. using ProTaper S1 ) : CA = 16:1Rpm = 250
Torque = 4.0 Ncm
N.cm0.5 1.0 1.5 2.5 4.0 MAX
Max Torque with 16:1 Contra Angle = 10 Ncm
Rotating movementRotating movement
TorqueTorqueTorqueTorque
SpeedSpeedSpeedSpeed
When file reaches the set torque value, the motor runs reverse until the motor has been stopped. Next start will be in Forward.
The motor handpiece stops without reverse rotation.
When file reaches the set torque value, the motor runs reverse until the file is freed andAutomatically returns to Forward.
STP - “STOP” Autoreverse
AR – “Standard” Autoreverse
SAR - “Special” Autoreverse
Beeping sound notifies user when 75% of the preset torque has been reached and when preset torque limit has been exceeded.
Rotating movement-Rotating movement-
The time from « x » to « y » must be as short as possible
(less than 1/1000 sec. )
Microprocessor analysis
Between X and Y, the torque is increasing progressively
until MAX value
Rotating movementRotating movement
Forward = a large rotating angle less than 360° in the cutting
direction provides high efficiency.
Reverse = a smaller rotating angle less than the angle set in Forward
allow the file to safety progress inside the canal.
Reciprocating movement Reciprocating movement
Major Advantages
With F+R Movement the torque is always: MAX
MAX torque with 16:1 contra-angle: 10NcmTorque is irrelevant in this mode
Angles variation from 10° to 360° every 5°.
Reciprocating movement Reciprocating movement
Pre-settings
TorqueTorqueTorqueTorque
SpeedSpeedSpeedSpeed
AnglAngl
eeAnglAngl
ee
ProtocolProtocol
Canal preparation using only one Ni-Ti rotary instrument: preliminary observations. G. YARED, International Endodontic journal, 2007.
Files - Reciprocating
Wave one /Reciproc®:
Reciprocating dedicated system from VDW
Unclockwise spiral
Fixed angulations: 150° - 30°
Single use
ENDODONTIC MOTORENDODONTIC MOTOR
Be free
-기존에 사용하던 파일 (protaper, Mtwo, k3 등 ) 로 reciprocating 가능
- 파일의 수명 (fatigue fracture) 을 2 배 이상 연장 ( 파일의 소모비용 감소 )
-Transportation 의 최소화로 인해 충전시 최상의 조건을 만들어줌
-Reciprocating 이 가능하여 안전한 근관확대 (torsion fracture 감소 )
-유저가 원하는 reciprocate 의 각도조절 가능
-Rotating, reciprocating 각 모드에서 10 개의 프로그래밍 가능
-1 년간 무상 A/S
i-endo dual 의 특장점