2
PRINZING Mechanical engineering
Design features• Machine in welded steel construction• Parallel infeed of the the upper shaft with ball and roller bearing working shafts• Working shafts are hardened and grounded• Infinitely variable main drive with foot switch, reversing switch for forward and backward movement• Infeed of the top roll via handwheel• easy axial adjustment of the down roll with handwheel
Standard equipment• Hardened stop plate, manual axial adjustable• Stable steel subframe with holes for fixing on the floor• Electrical safety control with emergency-stop function• Power supply 400V50Hz/3 Phase, country specific power supply possible• Roll key for a prompt changing of forming rolls
Special equipment• Motor driven, steeples controlled infeed of top roll• PLC control with touch screen and program memory with 200 programs• Central lubrication, manually operated• Divided stop• Brace support for bottom shaft by heavy duty work on the tube ends• Form rolls in special design hardened or surface coated• Adjustable tube guidance with tube support or center disc
3
Beading and Flanging Machines SME 63 - SME 125
SME 80/3 P• For production of tubeflanges or beads• Motorical infeed of the top roll, PLC, touch screen
and program memory• Tube guidance with tube support
SME 125/PK• For production of tensioning stripes• Motorical infeed of the top roll, PLC, touch screen
and program memory• Tensioning stripe device for diameters
from 175 mm - 620 mm
SME 125/4 P• For production of tubeflanges or beads• Motorical infeed of the top roll, PLC, touch screen
and program memory• Tube guidance made of welded with special tube
support
PRINZING SME 63 - SME 125
Peter Prinzing GmbH, Maschinenbau Telefon: +49 7336 96100Siechenlach 2 Telefax: +49 7336 9610-5089173 Lonsee-Urspring (Germany) E-Mail: [email protected]
Illustrations are partly with optional accessories. Subject to technical changes without prior notice! - © 2016 P. Prinzing GmbH
SME 100/VS• SME in special design for flanging of traffic signs• Special vertical beading and flanging machine design• Motorical infeed of the machine head• Motorical infeed of the top roll• Supporting table with brushes
Technical dataModel SME 63/2 P SME 80/3 P SME 80/5 P
Center distance rollers mm 63 80 80
Working depth mm 250 315 520
Ø Rollpin mm 25 32 32
Sheet thickness (400 N/mm²) mm 1,75 2,00 1,50
Working speed m/min 0 - 20 0 - 20 0 - 20
Motor power kW 0,75 1,5 1,5
Weight kg 260 280 300
Size (L x W x H) cm 90 x 80 x 140 100 x 90 x 150 130 x 90 x 150
Model SME 100/4 P SME 100/5 P SME 125/4 P SME 125/5 P
Center distance rollers mm 100 100 125 125
Working depth mm 400 500 400 500
Ø Rollpin mm 40 40 50 50
Sheet thickness (400 N/mm²) mm 2,50 2,00 3,50 3,00
Working speed m/min 0 - 20 0 - 20 0 - 20 0 - 20
Motor power kW 2,2 2,2 3,0 3,0
Weight kg 380 400 610 630
Size (L x W x H) cm 120 x 100 x 160 130 x 100 x 160 150 x 110 x 170 160 x 110 x 170
Further models and versions available on request!