BEER EQUIPMENT CATALOGd163axztg8am2h.cloudfront.net/static/doc/4b/69/670be3733...shutoff with check...

BEER EQUIPMENTCATALOG

3248 Northwestern Dr., San Antonio, TX 78238 • 800-779-8488

2

Regulatory Agency Listings:

3248 Northwestern Dr., San Antonio, Texas 78238 • 800-779-8488 • Fax 210-646-6009 • [email protected] taprite.com

Note: Not all items are NSF approved; only items marked with NSF are NSF approved.

Don’t risk system failures with inferior equipment! Do it right - choose Taprite!

Helping Companies Profit From Every Pour!Taprite is a preferred supplier to many well known brands in the soda and beer industries around the world. Our regulators have been an industry standard for over 60 years and are regarded as best in the

field. Taprite is owned by Aalberts Industries, which globally is the largest supplier of CO₂ regulators in the beverage industry. Taprite’s quality products, innovative designs, and commitment to the industry make it the brand of choice!

Quality Draught Beer Deserves Quality Delivery Systems!

MADE IN THE USA

Taprite Products Include: • Draft Beer Taps • CO₂ Regulators • Keg Couplers • Bag-in-Box Racks • Draft Towers • Stainless Steel Ice Chests • Party Pumps • Carbonation Testers • Conversion Stands • Gauge Protectors

3

INDEX

Taprite products have been brewery tested and approved, meeting and exceeding the highest standards.

Not responsible for typographical or photographic errors.© July 2013 Taprite. All rights reserved.

Taprite Overview.......................................................................................2

Index...........................................................................................................3

Regulators and Repair Kits.................................................................4-8

Regulator Accessories & Parts................................................................9

Keg Couplers.....................................................................................10-11

Coupler Parts...........................................................................................11

Party Pumps and Parts......................................................................12-13

Beer Towers and Parts.......................................................................14-15

T-Towers and Drip Trays..........................................................................16

Beer Faucets and Parts...........................................................................17

Shanks and Parts...............................................................................18-19

Refrigerator Conversion Kits................................................................19

Air Distributors........................................................................................20

FOB & Carbonation Testers...................................................................21

Tubing, Trunk Line, and Clamps........................................................22-23

Cleaning Kits..........................................................................................24

Cleaning Accessories............................................................................25

Pumps, Valves, Splicers , and Tailpieces...............................................26

Keg Valves (Spears)...............................................................................27

Regulator Trouble Shooting...................................................................28

Keg Coupler Reference..........................................................................29

Detailed Product Exploded Views...................................................30-42

Ordering Procedures.............................................................................43

Limited Warranty....................................................................................44

4

T741

FC741

T742

800-779-8488 taprite.com

REGULATORS

The TAPRITE ADVANTAGE • Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories• All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E• High CO₂ volumetric flow provides continuity in product dispensing• Polycarbonate bonnet will not chip, break, or fade• 10 Micron Filter built in to keep contaminants out of regulator• One repair kit for primary and secondary regulators

Primary Regulators Model Number Description

T741* 0-50 PSI working pressure, 60lb. gauge, 5/16” barb shutoff with check valve, silver cap

T741HP-G 0-50 PSI working pressure, 60lb. gauge, tank fitting, high performance, no outlet, red cap

T742 0-50 PSI working pressure, 60lb. & 2000lb. gauges, tank fitting, 5/16” barb shutoff with check valve, silver cap

T742EN 0-50 PSI working pressure, 60lb. & 2000lb. gauges, Euro tank fitting, 1/4” barb outlet, silver cap

T742H 0-50 PSI working pressure, 60lb. & 2000lb. gauges, tank fitting, 5/16” barb outlet, silver cap

T742HP 0-50 PSI working pressure, 60lb. & 2000lb. gauges, tank fitting, high performance, 5/16” barb with duck-bill check valve shutoff, red cap

T742HP-01 0-50 PSI working pressure, 60lb. & 2000lb. gauges, tank fitting, high performance, 1/4” flare with check valve, red cap

T742HP-100 0-50 PSI working pressure, 100lb. & 2000lb. gauges, tank fitting, high performance, 1/4” barb shutoff with check valve, red cap

3741-BR 0-50 PSI working pressure, 60lb. & 2000lb. gauges, tank fitting 5/16” barb shutoff with check valve, economy

T742-2 1P (Pressures) X 2P (Products), 60lb. & 2000lb. gauges 5/16” barb shutoff with check valve, silver cap

T752HP 2P (Pressures) X 2P (Products), 60lb. & 2000lb. gauges, tank fitting, high performance, 5/16” barb shutoff with duck-bill check valve shutoff, red cap

T752HP-01 2P (Pressures) X 2P (Products), 60lb. & 2000lb. gauges, tank fitting, high performance, 1/4” flare with check valve, red cap

T5741PMHPT 0-120 PSI working pressure, 160lb. & 2000lb. gauges, tank fitting, 5/16” barb with check valve shutoff, red cap

FC741 Primary Low Pressure Range for under bar dispensing Flow Rite Monitor Adjustment Range: 12-18 PSIG FC741H Primary Medium Pressure Range for cold plate box Flow Rite Monitor dispensers Adjustment Range: 30-45 PSIG *For a detailed product view, please refer to page 30

5

T741

FC741

T742


Made in the USA

During the manufacturing process the following tests are conducted:√ Safety Activation and Blow-off√ Leak Testing - all connections of accessories are checked. Bonnet cap, diaphragm, and capsule are properly torqued and pressure tested√ Component Testing - gauges, fittings and other accessories are pressure tested once assembled, to ensure they are working properly√ A sampling of each work order is randomly checked for workmanship, safety testing, leak testing, and component checks√ Engineering Lab Testing - production regulators are randomly taken from stock and checked for pressure decay and flow rate performance criteria

T742HP

Single Body Regulators (dual or single gauge) packed 8 per case

6


REGULATORSSecondary Regulators Model Number Description

T1661ST* *1P X 1P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff, gold cap

T1661ST-01 *1P x 1P, 60lb. gauge, 1/4” flare inlet/thru, 5/16” barb shutoff, gold cap

T1661ST-02 *1P x 1P, 60lb. gauge, 3/8” barb inlet/thru, 5/16” barb shutoff, gold cap

T1661STC *1P x 1P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff with check, metal bracket, gold cap

T1661STC-01 *1P x 1P, 60lb. gauge, 5/16” barb inlet/thru, 5/16” barb shutoff with check, metal bracket, gold cap

T1672ST* *2P x 2P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff, gold cap

T1672STA *2P x 2P, 60lb. gauge, 1/4” flare inlet/thru, 5/16” barb shutoff, gold cap

T1672STC *2P x 2P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff with check, gold cap

T1672STC-01 *2P x 2P, 60lb. gauge, 5/16” barb inlet/thru,5/16” barb shutoff with check, metal bracket, gold cap

T1672STC-02 *2P x 2P, 60lb. gauge, no inlet/thru fittings, 5/16” barb shutoff with check valve, gold cap

T1672STM *2P x 2P, 60lb. gauge, 5/16” barb inlet/thru, 5/16” barb shutoff, metal bracket, gold cap


T1683STC *3P x 3P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff with check, gold cap

T1683STC-01 *3P x 3P, 60lb. gauge, 5/16” barb inlet/thru, 5/16” barb shutoff with check, gold cap



T1694STC *4P x 4P, 60lb. gauge,5/16” barb inlet, 5/16” barb shutoff with check, gold cap

T1694STC-01 *4P x 4P, 60lb. gauge,5/16” barb inlet/thru, 5/16” barb shutoff with check, gold cap


T1661ST

*P x P = Pressures x Products

*For detailed product views, please refer to pages 31-34

7


T1683ST

T1694ST

T1683STC-01

Other regulator configurations may be available – please call 800-779-8488!

T1672ST

Secondary Regulators - Wall Mount Panels Model Number Description

T1661STWMK-01 *1P x 1P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff, 81/2” x 11" panel with 1 beer Y, gold cap, 60" jumper and CO₂ tubing

T1672STWMK *2P x 2P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff, 81/2” x 11" panel with 2 beer Y's, gold cap

T1672STWMK-01 *2P x 2P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff, 81/2” x 11" panel with 2 beer Y's, gold cap, 60" jumper and CO₂ tubing


T1683STWMK-01 *3P x 3P, 60lb. gauge, 5/16”: barb inlet,5/16” barb shutoff, 81/2” x 16" panel with 3 beer Y's, gold cap, 60" jumper and CO₂ tubing


T1694STWMK-01 *4P x 4P, 60lb. gauge, 5/16” barb inlet, 5/16” barb shutoff, 81/2” x 21" panel with 4 beer Y's, gold cap, 60" jumper

T1672STWMK-01

8


REGULATORS

Other regulator configurations may be available – please call 800-779-8488!

Nitrogen Regulators Model Number Description

5741PMHPN 0-120 PSI working pressure, 160lb. & 3000lb. gauges, 1/4” flare with check valve, black bonnet

5741PMHPNT 0-120 PSI working pressure, 160lb. & 3000lb. gauges, 5/16” barb shutoff with check valve, black bonnet

742HPN* 0-50 PSI working pressure, 60lb. & 3000lb. gauges, 5/16” barb shutoff with duck-bill check, black bonnet

741HPN-G 0-50 PSI working pressure, 60lb. gauge, tank fitting, no outlet, no tank gauge, black bonnet

742HPN-100 0-50 PSI working pressure, 100lb. & 3000lb. gauges, 5/16” barb shutoff with duck-bill check, black bonnet

742N 0-50 PSI working pressure, 60lb. & 3000lb. gauges, 5/16” barb shutoff with ball check, black bonnet

Regulator Repair KitsModel Number Description7740-15 Regulator Repair Kit, 2", ball and socket, flat seal - for 700 and 1600 series CO₂ regulators manufactured after October 2006 (10/2006)3740-17 Regulator Repair Kit, 1.6", ball and socket, flat seal - for 3740 series CO₂ regulators7740-15N Nitrogen Regulator Repair Kit

742HPN

*For a detailed product view, please refer to page 36

Single Body Regulators (dual or single gauge) packed 8 per case

9


REGULATOR ACCESSORIES & PARTSModel Number Description

600GPS-01 Rubber Gauge Protector

744GP Gauge Guard for 2 gauge regulators, metal

624 Gauge, 60lb.

624-1 Gauge, 100lb.

5605 Gauge, 160lb., bottom inlet, 1/4” NPT, right hand

6603 Gauge, 3000lb., 1/4” NPT- left hand

6603-2000 Gauge, 2000lb., 1/4” NPT- left hand

617BN Barb Fitting, 5/16”

1600A Shutoff, 5/16” barb

1600CA Shutoff with check, 5/16” barb

1600C-250 Shutoff with check, 1/4” barb

5460 Y fitting, 1/4” NPT

6600A Shutoff, 1/4” flare

6600CA Shutoff with check, 1/4” flare

15-0018-60 Regulator Panel, 81/2” x 16", galvanized

15-0019-60 Regulator Panel, 81/2” X 21", galvanized

43-0006-00 Metal Bracket Kit: contains stainless steel bracket, bolt and washer

740-12N Nitrogen Nipple Assembly, 1/4” NPT-left hand

440-18 Wrench, 11/8” x 15/16” for zinc bonnet

440-19 Wrench, 11/8” x 1 5/8” for poly bonnet

740-18NB CO₂ Nut Wrench, 11/8” hex

440-13UD CO₂ Nut 5/8”

440-17R Flat Seal for CO₂ tank fitting

2406-11 O-Ring Seal for CO₂ tank fitting

740-12 CO₂ Nipple, O-Ring seal, left hand

43-0006-00

600GPS-01

744GP

Model Description

740-13N Nitrogen Tank Nut, male thread

740-16 NPT Plug, 1/4” left hand

740-19 CO₂ Nut and Nipple with flat seal, left hand

763D CO₂ Washer - red Delrin

7000-6A Hose 6ft., 1/4” flare (F) x CO₂ fitting/nut

15-0018-60

1600

10

FT86P


KEG COUPLERS

CH5100

CH5003

CH5002

CH5000-45

FT86

*For a detailed product view, please refer to pages 36 and 37

Model Number Description

CH5000* Sankey “D”, blue handle

CH5000SS Sankey “D”, with stainless steel probe, gray handle

CH5000-45 Sankey “D”, white handle

CH5000-45L Sankey “D”, white handle, with locking leg

CH5001 Sankey “D”, red handle

CH5001C Sankey "D", red handle for Coors

CH5002 Sankey “D”, black handle

CH5003 Sankey “D”, gold handle

CH5004SS Sankey "D", with stainless steel probe, blue lever handle

CH5100* Sankey "S" European, black handle

CH5100L Sankey "S" European, black handle with locking leg

CH5200G G Coupler (Trilobe)

CH5300U U Coupler (Guinness/Harp)

CH5400A A Coupler (German Slider)

FT44T Sankey “D”, low-profile, black wing handle

FT44TAB Sankey “D”, low-profile, black wing handle

FT86 Sankey “D”, metal wing handle

FT86P Sankey “D”, plastic wing handle

FT90P Sankey "S", European, plastic wing handle

*For a coupler reference guide, please see page 29

11

FT86P


CH5300U

CH5200G

CH5400A

COUPLER PARTSModel Number Description

24253 Bottom Seal

70501 Duck Bill Check Valve for FT44T and FT44TAB (low profile taps)

752 Duck Bill Check Valve for FT86, FT86P, and FT90P

759 Beer Washer

80218-01 Coupler Handle Assembly - blue

80218-02 Coupler Handle Assembly - black

80219 Ball Retainer (only for CH5000 series)

80220 Ball (only for CH5000 series)

80221 Duck Bill Check Valve for CH5000 series, including CH5100

80225 Hinge Pin, Coupler

80228 Hex Nut

80231 Probe O-Ring

FT85-8A Metal Wing Handle Assembly, chrome-plated

Couplers packed 24 per case

12

FT50PF-4

PP501

Pony Pumps packed 24 per case

FT42SP

FT37PF-4


PARTY PUMPS

PP601


4097Q Gold Super Pump with hose and faucet

FT37PF 8" Cylinder Hand Pump, Wing Handle Tap, Faucet and Hose

FT37PF-4 4" Cylinder Hand Pump, Wing Handle Tap, Faucet and Hose

FT42SP Black Super Pump

FT50 Sankey “D” Lever, Black Handle, Picnic Pump Tap

FT50E Euro, Lever, Blue Handle, Picnic Pump Tap

FT50PF 8" Cylinder Hand Pump, Lever Handle Tap, Faucet and Hose

FT50PF-4 4" Cylinder Hand Pump, Lever Handle Tap, Faucet and Hose

PP501 Pony Pump, with hose and faucet (white body)

PP601* Black Bronco Pump with lever tap handle, hose and faucet

PP601-01 Red Bronco Pump with lever handle

PP601-4 Bronco Pump, Multi-tap with 4 dispensing hoses

PP602 Black Bronco Pump, Euro lever handle, hose and faucet

PP601-4

Party Pump Parts Model Number Description

24222 Locking Ring

24253 Bottom Seal

5436-100 Duck bill check valve for PP501 and PP601

70222-01 Plastic Pump Body Assembly (Bronco only)

70502 Plastic Faucet

70503 Plastic Faucet and Hose Assembly

440-1903 Beer Seal (replaces 70510)

752 Duck bill check valve for FT37PF, FT50PF (cylinder pumps)

FT85-114 Probe Retainer Ring

Bronco Pumps packed 24 per case

*For a detailed product view, please refer to page 42

13

FT50PF-4

PP501

Pony Pumps packed 24 per case

FT42SP

FT37PF-4


Enjoy the delights of real draught beer-whether it be for a party or a picnic, these party pumps are perfect-anytime, anywhere!

FT37PF

Cylinder Pumps packed 12 per case

14


BEER TOWERS

• I.D. hose (5' x 3/16”) with wing nut connection • Polished stainless steel• Faucets available with brass or stainless steel levers• Closed cell insulation to eliminate warm-up problems during slow serving periods• Chrome-plated flange cover on the 21/2” models• Mounting gasket, screws, and faucet knobs are included

D4740SS D4740KSS


D4740SS 21/2” Stainless Steel Column, 1 chrome-plated faucet, brass with stainless steel lever

D4740KSS 21/2” Stainless Steel Column, 1 chrome-plated faucet, brass with brass lever

D4743TSS 3" Stainless Steel Column, 1 chrome-plated faucet, brass faucet with stainless steel lever

D4743TKSS 3" Stainless Steel Column, 1 chrome-plated faucet, brass with brass lever

D4743DTSS 3" Stainless Steel Column, 2 chrome-plated faucet, brass with stainless steel levers

D4743DTKSS 3" Stainless Steel Column, 2 chrome-plated faucet, brass with brass levers

D4743TTSS 3" Stainless Steel Column, 3 chrome-plated faucet, brass with stainless steel levers

D4743TTKSS 3" Stainless Steel Column, 3 chrome-plated faucet, brass with brass levers

D4743ADD-1 Tower Adapter – 1 Product (for use with 3" draft tower)

D4743ADD-2 Tower Adapter – 2 Product (for use with 3" draft tower)

*For detailed diagrams of the Draft Arms, please refer to pages 39 and 40

NEW! Stainless Steel Columns!

15


D4743TSS D4743TKSS

D4743DTSS D4743DTKSS

D4743ADD-1

D4743TTSS D4743TTKSS

D4743ADD-2


4301 Knob, faucet, black

4332 Coupling Nut, faucet, knurled

D12-2PA Cap Assembly, 21/2”, chrome-plated

D12-3PA Cap Assembly, 3", chrome-plated

D15-2P Bottom Flange Cover for 21/2” draft

D16 Bottom Gasket, 21/2”

D16-3 Bottom Gasket, 3"

D4N-3M Shank, 21/4” x 3/16” bore with 1/4” barb


D4N-3A Shank Assembly for 21/2” tower, 21/4” X 3/16” bore, 1/4” barb, chrome flange (for 21/2” column)

D4N-3-3A Shank Assembly for 3" tower, 21/4” X 3/16” bore, 1/4” barb, 3" collar, chrome flange (for 3" column)

D6M-3LP Faucet Flange for 3" diameter tower

D6PL Faucet Flange for 21/2” diameter tower

D7P Spacer, inner, column faucet 3/16”

D8 Nut, 11/16” hex, beer thread

Draft Arm Parts

*For detailed diagrams of the Draft Arms, please refer to pages 39 and 40

16


T-TOWERS“T” Towers - 3" Pedestals - Brushed Stainless Steel Model Number Description

TT3CR “T” Tower 3 product stainless steel finish, Air cooled

TT3CR-G “T” Tower 3 product stainless steel finish, Glycol ready TT4CR “T” Tower 4 product stainless steel finish, Air cooled

TT4CR-G “T” Tower 4 product stainless steel finish, Glycol ready







Pass Thru Towers - 3” Pedestals - Brushed Stainless Steel

PT8SS Pass Thru Tower 8 Product - stainless steel finish



Forced Air Tower Features:• Laser Cut Precision – resulting in a virtually air tight tower• 16 gauge stainless steel & brass• Interior stainless steel tower folds• Shanks are machined with built-in collar & tail pieces• 1/4” Rubatex Box insulation Glycol Ready Tower Features:• Laser Cut precision – resulting in a virtually air tight tower• 16 gauge stainless steel & brass• Interior stainless steel tower folds• Shanks are machined with built-in tail pieces• Copper glycol tubes• Formed copper Glycol cooling loops, offset 1/2” from box front• Foamed in-place insulation• Beer lines wrapped and insulated in tower tube

Lead times may vary - please call 800-779-8488 to confirm.

TT6CR

Call us for a Drip Tray quote!

DT12SS - 5 x 12 Drip Tray with grill

17


BEER FAUCETSBF1001

BF1002 SF2001


BF1001 Chrome-Plated with brass lever

BF1001SC Chrome-Plated with brass lever (self closing)

BF1002 Chrome-Plated with stainless steel lever

BF1002SC Chrome-Plated with stainless steel lever (self closing)

BF1002SC-SS Stainless Steel Body and lever (self closing)

BF1002SS Stainless Steel with stainless steel lever

BF1003 Brass-Plated with brass lever

BF1004 Brass-Plated with stainless steel lever

SF2000 Polished Brass Stout Faucet

SF2001 Chrome-Plated Stout Faucet BF1003


70102-01 Faucet Lever, brass

70102-02 Faucet Lever, stainless steel

70103-04 Shaft Assembly, chrome-plated with seat

70104 Ball Washer

70105 Knob Lever Collar, chrome-plated

70106 Knob Lever Collar, gold-plated

70107 Body Gasket

70108 Friction Washer

70109 Faucet Shaft Nut, nickel-plated brass

70110 Valve Shaft Seat

70166-01 Friction Bonnet (Chrome)

70380 Spanner Wrench with red handle

Model Description

SF2000-13 Stout Faucet Nozzle O-Ring

SF2000-14 Stout Faucet Disc

SF2000-15 Stout Faucet Cone

SF2000-2 Stout Faucet Screw, stainless steel

SF2000-3 Stout Faucet Sliding Cap

SF2000-4 O-Ring Screw Cap

SF2000-9 Stout Faucet upper piston O-Ring

SF2001-1 Stout Faucet Lever, chrome

BF1000SC-Kit Retro Kit: Convert standard faucet to self closing

Beer Faucet Parts

*For detailed product views of BF Types, please refer to pages 41 and 42

Faucets packed 24 per case

BF100SC

18


SHANKS

4336A

4333NAF

D4N-3A

4334A

4334AF

4334NA

Draft Tower Shank Assemblies Includes Shank, Coupling Nut, Chrome Flange, Spacer, and Nut

1/4” Bore, 1/4” Barb, 2-1/4” LongPart # DescriptionD4N-3A For 2-1/2" TowersD4N-3-3A For 3" Towers

Standard Shank Assemblies Includes Shank, Flange, Sleeve, Locking Ring, Coupling Nut, and Locking Nut

Barbed - 1/4” Bore, 1/4” BarbBlack Plastic Flange Stainless Steel FlangePart # Length Part # Length4331NA-3 2" 4331NAF-3 2"4333NA-3 3" 4333NAF-3 3"4334NA-3 41/8" 4334NAF-3 41/8"4336NA-3 51/8" 4336NAF-3 51/8"

Barbed - 1/4” Bore, 5/16” BarbBlack Plastic Flange Stainless Steel FlangePart # Length Part # Length4333NA 3" 4331NAF 3"4334NA 41/8" 4333NAF 41/8"4336NA 51/8" 4334NAF 51/8"

No Barb - 1/4” BoreBlack Plastic Flange Stainless Steel FlangePart # Length Part # Length4331A 2" 4331AF 2"4333A 3" 4333AF 3"4334A 41/8" 4334AF 41/8"4336A 51/8" 4336AF 51/8"4337A 6" 4337AF 6"4338A 8" 4338AF 8"

19


SHANKS

REFRIGERATOR CONVERSION KITS

KEGOR KIT-1


KEGOR KIT-1 Refrigerator Conversion Kit with T742 Regulator, Sankey D Coupler, faucet & knob, shank, Spanner Wrench, drip tray, 5 lb CO2 tank, beer & CO2 tubing, and instructions

KEGOR KIT-2 Refrigerator Conversion Kit without CO2 tank

Shanks Only

Barbed - 1/4” Bore, 1/4” BarbPart # LengthD4N-3M 21/4" (for Draft Arms)4331N-3 2"4333N-3 3"4334N-3 41/8"4336N-3 51/8"

Barbed - 1/4” Bore, 5/16” BarbPart # Length4333N 3"4334N 41/8"4336N 51/8"

No Barb - 1/4” BarbPart # Length4331 2"4333 3"4334 41/8"4336 51/8"4337 6"4338 8"

20

70163-02

1744S 1744


AIR DISTRIBUTORSModel Number Description (Anodized Aluminum unless otherwise noted)

1741-1 Manifold, 1-way, 13/4” long-manifold body, no fittings

1741 Manifold, 1-way without safety, 3/8” barb X 5/16” barb shutoff

1741S Manifold, 1-way with safety, 3/8” barb X 5/16” barb shutoff


1742 Manifold, 2-way without safety, 3/8” barb X (2) 5/16” barb shutoff

1742S Manifold, 2-way with safety, 3/8” barb X (2) 5/16” barb shutoff



1743S Manifold, 3-way with safety, 3/8” barb X (3)5/16” barb shutoff



1744S Manifold, 4-way with safety, 3/8” barb X (4) 5/16” barb shutoff

70163-02 Manifold, Brass, 2-way with safety, 3/8” barb X (2) 5/16” barb shutoff

70163-04 Manifold, Brass, 4-way with safety, 3/8” barb X (4) 5/16” barb shutoff

1742S

1743S

1741

1742

Other configurations may be available – please call 800-779-8488!

21


FOB & CARBONATION TESTERS

FOB

2701-BCT

Foam Detectors Model Number Description

FOB Deluxe Model: Foam on Beer Detector with bottom fittings

FOB-CL Classic Style: Foam on Beer Detector, side inlet, bottom outlet

Improved Modular Design & Durability Our FOB (Foam on Beer Detector) eliminates loss of beer during keg tapping by allowing only solid beer into the beer lines. Normal beer flow keeps the FOB's afloat at the top of the chamber while interruption of beer flow by foam allows the float to drop and seal the FOB's outlet port.

Beer Carbonation Tester

2701-BCT Beer Carbonation Tester Complete with protective case and full operation instructions.

The Taprite Carbonation Tester is a budget friendly alternative the Zahm Nagel Tester and is designed to verify carbonation levels during equipment installations, keg change-outs, and trouble-shooting assessments in the field. It has been tested on a variety of beer brands including Budweiser, Bud Light, Coors Light, Miller Lite, Shiner, and Heineken, all with accurate results.

A handy label is affixed on the tester's exterior to display the appropriate CO₂ volume based on the temperature and pressure readings.

FOB-CL

22


TUBING & TRUNK LINE

I.D P/N COLOR O.D CLAMPS CLAMP P/N LENGTH 547B-100 Black 7/16” 13.3 36-0133-00 100' 3/16” 547C-500 Clear 7/16” 13.3 36-0133-00 500' 547C-100 Clear 7/16” 13.3 36-0133-00 100' 1/4” 548C-100 Clear 1/2” 14.5 36-0145-00 100' 549C-100 Clear 9/16” 15.7 36-0157-00 100' 549C-500 Clear 9/16” 15.7 36-0157-00 500' 5/16” 553R-100 Red 9/16” 17.0 36-0170-00 100' 553R-500 Red 9/16” 17.0 36-0170-00 500' 550B-100 Black 5/8” 18.5 36-0185-00 100' 3/8” 550C-100 Clear 5/8” 18.5 36-0185-00 100' 550C-500 Clear 5/8” 18.5 36-0185-00 500' 1/2” 551C-100 Clear 3/4” 21 36-0210-00 100'

Thermoplastic Vinyl Hose Bevlex PVC Tubing is used for draft beer transfer and bag-in-box soft drink applications. NSF-51 Listed. Special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer for excellent kink resistance and taste protection properties.

Blue-tinted Crystal Clear PVC Construction Braided Vinyl Tubing Food-grade materials — CLEARBRAID® hose is NSF-51 and NSF-61 listed.Glass smooth interior — stays clean and reduces pressure loss. Spiraled polyester yarn reinforcement with multiple longitudinal polyester yarn — provides pressure performance and kink-resistance while reducing elongation under pressure, orange tracer yarn provides easy identification.

I.D P/N COLOR O.D CLAMPS CLAMP P/N LENGTH 1/4” 548WD-100 Clear 7/16” 13.3 36-0133-00 100' 5/16” 549WD-100 Clear 7/16” 15.7 36-0157-00 100' 3/8” 550WD-100 Clear 19/32” 17 36-0170-00 100'

23


Non-Braided Barrier Tubing Bev-Seal Ultra® Series 235 Tubing. Unsurpassed oxygen and flavor protection combined with flushability in a coextruded tube. NSF-51 and NSF-61 listed.

I.D P/N COLOR O.D CLAMPS CLAMP P/N LENGTH 0.265" 548BT-500 Translucent 3/8” 10.5 36-0105-00 500' 0.320" 549BT-500 Translucent 7/16” 13.3 36-0133-00 500' 0.380" 550BT-500 Translucent 1/2” 14.5 36-0145-00 500'

Insulated Barrier Tubing Bundles Non-cabled and cabled insulated bundles are comprised of flushable Bev-Seal Ultra® tubes each color coded and individually numbered, and black-colored coolant tubes strategically placed and designed to provide optimum cooling. A tear-resistant aluminized film wrap over the group of tubes further enhances the insulating properties of the 3/4” thick tubular foam sleeve. A black extruded jacket with slip agent to minimize friction is branded with product identification, NSF listing marks, and footage counter marks. Other jacket colors available (some limitations may apply).

Other sizes available-call for a quote

Configuration P/N COLOR O.D. CLAMPS CLAMP P/N Length CDI432-250 Black PVC 3" 14.5 36-0145-00 250' Reel

CDI632-250 Black PVC 3.4" 14.5 36-0145-00 250' Reel



CDI1234-250 Black PVC 4" 14.5 36-0145-00 250' Reel

4 – .380 X .500 Bev-Seal Ultra Tubes (2 - .380 X .500 Black LLDPE Tubes)

6 - .380 X .500 Bev-Seal Ultra Tubes (2 - .380 X .500 Black LLDPE Tubes)

8 - .380 X .500 Bev-Seal Ultra Tubes (2 - .380 X .500 Black LLDPE Tubes)(10 - .380 X .500 Bev-Seal Ultra Tubes (4 - .380 X .500 Black LLDPE Tubes)

(12 - .380 X .500 Bev-Seal Ultra Tubes (4 - .380 X .500 Black LLDPE Tubes)

24

1841


CLEANING KITS

1842


1842 Cleaning Kit with 1 quart bottle, pump, faucet brush, hose brush, coupling nut, wrench, ball lifter, powder beer line cleaner, and instructions

1842G 1 Quart Cleaning Kit Gravity

1842G-X 1 Quart Cleaning Kit Gravity without beer line cleaner

1841 1 Quart Cleaning Bottle with FT584 Pump

PBLC 1/2 lb. bag of powder beer line cleaner for cleaning kits

CC401L Cleaning Cup

25

FT110AB

CLEANING ACCESSORIESModel Number Description4350 Spanner Wrench4350S Combination Heavy Duty Spanner, Hex Nut, and Screw Drive Wrench4353 Straight Cleaning Attachment with 5/16” hose barb end (2 pc.)902 Duplex Coupling (male beer thread x male beer thread) for cleaning two beer lines904A I.D. Hose Brush; 3/16”, 66" long904B I.D. Hose Brush; 1/4”, 66" long904C I.D. Hose Brush; 3/8”, 66" long904D I.D. Hose Brush; 1/2”, 66" long 905W Standard Faucet Brush; 3/4” x 33/8” x 83/4” long905WL Brush 5/8” x 3" x 14" long 70380 Spanner Wrench with red handle D4740-W Wrench Set for draft towers center and side access 1-1/16” x 1" (2 pc.)FT85-117 Ball Lifter - the insertion of this device into the bottom of the tap probe lifts the ball check valve, permitting cleaning from the faucet through the tavern tapFT86-12 Wrench, Probe, and Beer Hex Nut FT101L 1 oz. Can of Probe Lubricant - After cleaning, tap probes should be relubricated (sparingly) with this odorless, tasteless lubricantFT108 Single Flusher for single hole keg valve tapsFT109S Double Flusher Adaptor - Beer thread ends permit two single flushers to be coupled together to form a double flusherFT110AB Double Flusher for single hole keg valve tapsFT115BA Series Cleaning Adaptor - When a series system is to be cleaned, this adaptor should be used with FT108 Single Flusher and FT874C Cap to hold the probe check valves in the open position FT116 Wrench - Taprite & Perlick ProbeFT872 Elbow Fitting for FT86P, FT86 tapsFT874C Cap and Washer - Used on the male beer thread end of a single flusher to convert it for series tap cleaningFT938 8 oz. Tin of Probe Lubricant

4350S

FT116

70380

FT109S

905W

FT874C

FT108

FT101L

D4740-W


26

PUMPS, VALVES, SPLICERS, & TAILPIECES

Questions? Contact us at [email protected]

Flojet Beer Pump Dispense beer from a keg, cask, or brew kettles in long or short-draw systems

Flow Reversal Valve

Flojet’s G56 Flow Reversal Valve is designed as an add-on accessory for the G56 Beer Pump to allow beer line cleaners to run solution through a Flojet G56 Pump-Driven Beer System in both directions. Running cleaning solution through draught beer systems in alternating directions from the faucet to the tapping device (and vice versa) has been found to enhance cleaning effi-ciency. Further, a multiple beer faucet system utilizing G56 Beer Pumps with Flow Reversal Valves allows for multiple lines to be cleaned at one time.

50-1135-00

50-1136-00

Splicers & Tailpieces


1331 Pocket Hose Cutter

525 Wing Nut, nickel-plated

80228 1" Hex Nut

526A Tailpiece for 3/16” I.D. Hose

526B Tailpiece for 1/4” I.D. Hose

526C Tailpiece for 3/8” I.D. Hose

526D Tailpiece for 1/2” I.D. Hose

526E Tailpiece for 5/16” I.D. Hose

526A2 Splicer, 3/16” X 3/16”

526AB Splicer, 3/16” X 1/4”

526AC Splicer, 3/16” X 3/8”

526AE Splicer, 3/16” X 5/16”

526B2 Splicer, 1/4” X 1/4”

526BE Splicer, 1/4” X 5/16”

526C2 Splicer, 3/8” X 3/8”

526CE Splicer, 3/8” X 5/16”

526E2 Splicer, 5/16” X 5/16”


50-1135-00 Beer Pump

• Air compression can be used to pressurize the beer pumps

• Cost-Effective: no need for mixed gases or gas blenders

• Pump increases the pressure in the product dispense line, which ensures the inherent gas in the solution (beer) cannot break out

• Smaller I.D. tubing can be used in some installations, which reduces the amount of beer wasted when cleaning lines

• The air/gas used to power the pump never comes into contact with the beer, providing protection from flat or tainted beer due to impure air contamination or oxidation

• Capable of traversing up to 800 feet (244m) horizontally through a single line

• Capable of delivering beer up to 10 storeys (30m) vertically through a single line

• Pump can be used to aid in beer line cleaning through wall mounted cleaning sockets

• Infinitely variable to suit all runs and rises

• Can be used to supply multiple faucets (up to 5) from a single keg or keg series, which cuts walk-in cooler clutter by lowering the number of kegs on tap at one time and promoting product quality/freshness

• Feeds up to 3 faucets through a single line


50-1136-00 Valve, Flow Reversal


27

PUMPS, VALVES, SPLICERS, & TAILPIECES KEG VALVES (SPEARS)Since 1980, over 25 million DSI Keg Valves have been in service with the largest brewers and keg manufacturers worldwide. Our CO2 Valves, O-Rings, and Retaining Rings are interchangeable as and serve as a direct replace-ment with those of other competitive Keg Valve providers. Our Keg Valves' single piece casting eliminates weld seams and reduces the risk of micro-biological contamination. Both Poppet Style and Ball Style CO2 Valves are available to meet your OEM requirements. Our complete American D-Sankey Keg Valve is available in drop-in or threaded versions and in lengths that meet specifications of all brewers and keg manufacturers worldwide. Model Number Description

50-1130-00 US Keg Valve - D Sankey, 552mm

Component Parts

Questions? Contact us at [email protected]

06-2058-00Retaining Ring*

50-1125-00 CO2 Valve forUS Sankey Ball

Type Spear*

47-0003-00 Ball

47-0001-00 Inner Beer

Spring

47-0002-00Outer CO2

Spring

45-0017-00 O-Ring*

47-0004-00Locking Disc

06-2067-00 CO2 Valve for Poppet Type

Spear*

• Stainless Steel• Secure installation fittings• Built in safety features• Easy to tap and clean• Electro-polished surface• Robust ball valve• Damage-resistant body design• Easy mounting and dismounting

Retaining Ring*

D Sankey Body

O-Ring*

CO2 Valve*

Ball

Inner Beer Spring

Down Tube

Outer CO2 Spring

Locking Disc

* Interchangeable and compatible with other competitive keg valve manufacturers


• High resistant rubber for gaskets and O-Rings with FDA certification• Tumbled body results in superior surface for ease of cleaning• Designed for high speed, non- turbulent filling of kegs• One piece cast body with no weld seams

28

REGULATOR TROUBLE SHOOTINGProblem Root Cause SolutionLeak at top Bonnet hole Capsule seat leak Reseat Capsule & apply proper torques (self centering -60 in/lbs; ball and socket -40 in/lbs) Replace capsule seat Diaphragm leak Reseat Diaphragm if self-centering type; replace diaphragm Improper capsule/diaphragm Check that capsule ball is inside diaphragm hex assembly slot, tighten/align per assembly instructionsLeak at the Bonnet thread Bonnet not seated properly Check for cross threading; Reseat bonnet and apply proper torque Loose bonnet Retighten bonnet with proper torque (zinc -190 in/lbs; poly-190in/lbs) Paint in thread (zinc only) Scrap Bonnet and replace with a new oneLeak at the fittings Fitting not tight Remove fitting and apply teflon tape and loc-tite Install fitting until tight Crossed threads Remove fitting and replace with a new oneLeak at tank fitting Fitting not tight on tank Retighten fitting until tight on tank valve Damaged or worn out seal Replace seal (o-ring/washer) Damaged nut or tank fitting Replace nut/tank fittingLeak at the safety Debris at sealing surface Remove safety and check the quad ring for debris & clean Reinstall safety components Unable to turn bonnet screw Adjustment screw threads Replace zinc bonnet assembly or top adjustment cap/knob are crossed Adjustment knob is stripped Replace poly bonnet assembly

Questions? Call us at 800-779-8488 for technical assistance

Refer to pages 4 - 9 for detailed product listings of available Taprite regulators, spare parts and accessories.


29

KEG COUPLER REFERENCE

COUPLER TYPE COUPLER TYPE COUPLER TYPE COUPLER TYPE COUPLER TYPE Sankey “D” “S” “A” “G” “U” TAPRITE CH5000 (blue) CH5100 (black) CH5400A (black) CH5200G (black) CH5300U (black) Part No. CH5000-45 (white) CH5100BL (blue) (handle color, CH5000-45L (white,locking leg) CH5100L (black,locking leg) other info) CH5000SS (gray,s/s probe) CH5001 (red) CH5001SS (red,s/s probe,1/4barb) CH5002 (black) CH5003 (gold) CH5004SS (blue,s/s probe) Beer Brands Abita

Anheuser-Busch InBevBass

BostonBoulevard

New BelgiumSAB Miller Coors

ShinerSierra Nevada

Majority of US breweries, unless noted

AmstelBecks

Belle-VueDe Koninck

ErdingerHeineken

John CourageLindeman

Lion NathanMarstonsMoretti

MurphysPilsner Urquell

PiraatSaint Pauli Girl

Scottish & NewcastleStella Artois

Tetleys

AyingerBitburgerFischer

FranziskanerHacker-Pschorr

HoegaardenIsenbeck

LowenbrauPaulanerSpaten

StarpramenVictoria

WarsteinerWeihenstephan

AnchorBoddingtons

FullersGrolsch

Old Speckled HenTennentsWatneys

GuinnessHarp

Smithwicks

*For detailed product descriptions of Taprite Couplers, please refer to page 10


30

T742 PRIMARY REGULATOR

1

2

3

4

5

7

6

8

10

11

9

T742 REGULATOR ASSEMBLYPARTS BREAKDOWN

*** NOT NORMALLY REPLACED WHEN REPAIRING REGULATOR

DESCRIPTION

-POLY BONNET ASSEMBLY, SILVER CAP-LOW PRESSURE DIAPHRAGM SPRING-DIAPHRAGM/BONNET GASKET-DIAPHRAGM REPAIR KIT - 2" BALL/SOCKET TYPE DIAPHRAGM, CAPSULE, AND FLAT SEAL (ITEM 11)-2000 PSI TANK GAUGE, LEFT HAND THREAD-5/16" BARB, SHUT-OFF WITH BALL CHECK-CAPSULE SPRING-60 PSI GAUGE-CO2 TANK NIPPLE WITH FLAT SEAL, LEFT HAND THREAD-CO2 TANK NUT-FLAT SEAL FOR CO2 TANK FITTING

PART NO

740-602******7740-15

6603-20001600C***624C740-12

440-13UD440-17R

ITEM

1.2.3.4.

5.6.7.8.9.

10.11.

REV C, 10-2010

3248 NORTH WESTERN DR - SAN ANTONIO, TX 78238 - PHONE: 210-523-0800 - FAX: 210-646-6009 - EMAIL: [email protected]

*For product description, please refer to page 4


31

T1661ST SECONDARY REGULATOR

1

2

3

4

5

6

7

8

9

10

T1661ST REGULATOR ASSEMBLYPARTS BREAKDOWN


DESCRIPTION

-POLY BONNET ASSEMBLY, GOLD CAP-LOW PRESSURE DIAPHRAGM SPRING-DIAPHRAGM/BONNET GASKET-DIAPHRAGM REPAIR KIT - 2" BALL/SOCKET TYPE DIAPHRAGM, CAPSULE, AND FLAT SEAL-PLUG, HEX HEAD-5/16" BARB, SHUT-OFF-CAPSULE SPRING-60 PSI GAUGE-5/16" BARB FITTING-METAL BRACKET KIT

PART NO

740-601******7740-15

665U1600***624617BN43-0006-00

ITEM

1.2.3.4.

5.6.7.8.9.10.

REV A, 07-2010




32


1

2

3

4

5

6

7

8

9

10


ITEM

1.2.3.4.

5.6.7.8.9.

10.

PART NO

740-601******7740-15

***160043-0006-00624665U617BN

DESCRIPTION

-POLY BONNET ASSEMBLY, GOLD CAP-LOW PRESSURE DIAPHRAGM SPRING-DIAPHRAGM/BONNET GASKET-DIAPHRAGM REPAIR KIT - 2" BALL/SOCKET TYPE DIAPHRAGM, CAPSULE, AND FLAT SEAL-CAPSULE SPRING-5/16" BARB, SHUT-OFF-METAL BRACKET KIT-60 PSI GAUGE-PLUG, HEX HEAD-5/16" BARB FITTING

*** NOT NORMALLY REPLACED WHEN REPAIRING REGULATORREV A, 07-2010




33


9

10

1

2

3

4

5

6

7

8



DESCRIPTION


PART NO

740-601******7740-15

***160043-0006-00624665U617BN

ITEM

1.2.3.4.

5.6.7.8.9.

10.

REV A, 07-2010

3248 NORTH WESTERN DR - SAN ANTONIO, TX 78238 - PHONE: 210-523-0800 - FAX: 210-646-6009 - EMAIL: [email protected]*For product description, please refer to page 6


34


1

2

3

4

5

6

7

8

9

10


DESCRIPTION


ITEM

1.2.3.4.

5.6.7.8.9.10.

PART NO

740-601******7740-15

***160043-0006-00624665U617BN


REV A, 07-2010




35

742HPN NITROGEN REGULATOR

1

2

3

4

5

6

7

8

9

10

11

12

742HPN REGULATOR ASSEMBLYPARTS BREAKDOWN


DESCRIPTION

-ZINC BONNET, BLACK-SPRING RETAINER-LOW PRESSURE DIAPHRAGM SPRING-DIAPHRAGM/BONNET GASKET-DIAPHRAGM REPAIR KIT - 2" BALL/SOCKET TYPE DIAPHRAGM, CAPSULE, AND O-RING (ITEM 12)-3000 PSI TANK GAUGE, LEFT HAND THREAD-5/16" BARB, SHUT-OFF WITH DUCK BILL VALVE-CAPSULE SPRING-60 PSI GAUGE-NITROGEN TANK NUT-NITROGEN TANK NIPPLE WITH O-RING, LEFT HAND THREAD-O-RING FOR NITROGEN TANK FITTING

PART NO

740-2NPA*********7740-15N

6603

***624740-13N740-12N

2406-11

ITEM

1.2.3.4.5.

6.7.8.9.

10.11.

12.

REV A, 07-2010

3248 NORTH WESTERN DR - SAN ANTONIO, TX 78238 - PHONE: 210-523-0800 - FAX: 210-646-6009 - EMAIL: [email protected]*For product description, please refer to page 8


36

CH5002 COUPLER

1

2

3

4

56

7

8

9

10

11

12

13

CH5002 COUPLER, SANKEY D, BLACK HANDLEPARTS BREAKDOWN

REV B, 05-2013

ITEM

1.2.3.4.5.6.7.8.9.

10.11.12.13.

PART NO

802198022080222-01FT40-15802288022780221802172425380218-02802338022580231

DESCRIPTION

-BALL RETAINER-COUPLER BALL, NYLON-PROBE, D STYLE, NICKEL PLATED-PROBE SEAL -HEX NUT-TAILPIECE, 3/8" BARB-CHECK VALVE-COUPLER BODY-COUPLER SEAL-HANDLE ASSEMBLY, BLACK-PRESSURE RELIEF ASSEMBLY-HANDLE HINGE PIN-O-RINGS

3248 NORTHWESTERN DR - SAN ANTONIO, TX 78238 - PHONE: 210-523-0800 - FAX: 210-646-6009 - EMAIL: [email protected]



37

CH5100 COUPLER

1

2

3

4

5

68 7

9

10

11

12

13

DESCRIPTION

-BALL RETAINER-COUPLER BALL, NYLON-PROBE, S STYLE, NICKEL PLATED-O-RINGS-PROBE SEAL, S STYLE-HANDLE ASSEMBLY, BLACK-COUPLER BODY-COUPLER SEAL-PRESSURE RELIEF ASSEMBLY-HANDLE HINGE PIN-CHECK VALVE-TAILPIECE, 3/8" BARB-HEX NUT

PART NO

802198022080223-01802317053280218-0280217242538023380225802218022780228

ITEM

1.2.3.4.5.6.7.8.9.10.11.12.13.


CH5100 COUPLER, "S" TYPE,EURO PROBE, BLACK HANDLE

PARTS BREAKDOWN

REV B. 05-2013 *For product description, please refer to page 10


38

DRAFT ARM

2 3 4 5

8

6

7

9

10

1

DESCRIPTION

-FAUCET: S/S, CHROME, OR GOLD FINISH-KNOB, FAUCET, BLACK-SHANK, 2 1/4" X 3/16" BORE, 1/4" BARB-COUPLING NUT, FAUCET, KNURLED-FAUCET FLANGE FOR 2 1/2" DIAMETER TOWER-CAP ASSEMBLY, 2 1/2", CHROME PLATED-NUT, 1 1/16" HEX, BEER THREAD-SPACER, INNER, COLUMN FAUCET-BOTTOM FLANGE COVER FOR 2 1/2" DRAFT-BOTTOM GASKET, 2 1/2"-SHANK ASSEMBLY (SHANK WITH COMPONENTS) INCLUDES ITEMS 3, 4, 5, 7, & 8

PART NO

***4301D4N-34332D6PLD12-2PAD8D7D15-2PD16D4N-3A

ITEM

1.2.3.4.5.6.7.8.9.10.11.

***SEE FAUCET PAGE OF CATALOG


2 1/2" DRAFT TOWERPARTS BREAKDOWN

REV A. 10-2010



39

DRAFT ARM

1

2 5436

7

8

9

***SEE FAUCET PAGE OF CATALOG

ITEM

1.2.3.4.5.6.7.8.9.10.

PART NO

***4301D4N-34332D6M-3LPD12-3PAD8D7D16-3D4N-3-3A

DESCRIPTION

-FAUCET: S/S, CHROME, OR GOLD FINISH-KNOB, FAUCET, BLACK-SHANK, 2 1/4" X 3/16" BORE, 1/4" BARB-COUPLING NUT, FAUCET, KNURLED-FAUCET FLANGE FOR 3" DIAMETER TOWER-CAP ASSEMBLY, 3", CHROME PLATED-NUT, 1 1/16" HEX, BEER THREAD-SPACER, INNER, COLUMN FAUCET-BOTTOM GASKET, 2 1/2"-SHANK ASSEMBLY (SHANK WITH COMPONENTS) INCLUDES ITEMS 3, 4, 5, 7, & 8


3" DRAFT TOWERPARTS BREAKDOWN

REV A. 10-2010 *For product description please refer to page 14


40

BF1001-BF1003 FAUCETS

1

2

3

4

5

6

7

8

BF1001- CHROME FAUCET W/ BRASS LEVERBF1002- CHROME FAUCET W/ STAINLESS STEEL LEVERBF1003- GOLD FAUCET W/ BRASS LEVER

9

ITEM NO:

12345

6

789

PART NO:

7010570166-01701087010470102-0170102-0270101-0170101-027010770103-0470110

DESCRIPTION:

COLLAR, FAUCET, CHROMEBONNET, FAUCETWASHER, FRICTIONWASHER, BALLLEVER, FAUCET, BRASS (BF1001/ BF1003)LEVER, FAUCET, S/S (BF1002)BODY, FAUCET, CHROME (BF1001/ BF1002)BODY, FAUCET, GOLD (BF1003)GASKET, FAUCET, BODYSHAFT ASSY, CHROME W/ SEATSEAT, VALVE SHAFT

REV A, 08-20103248 NORTHWESTERN DRIVE - SAN ANTONIO, TX 78238 - PHONE: (210) 523-0800 - FAX: (210) 646-6009 - EMAIL: [email protected]



41

BF1001SC FAUCET



42

PP601 BRONCO PARTY PUMP



43

Ordering Procedures While many items can be shipped within 24-48 hours of order placement, the standard lead time on build-to-stock items is 5-7 business days, not including transit time. Lead time on non-stock items, custom items and other items may vary.

Complete orders received before 2:00 p.m. CST will be processed the same business day. LTL orders marked for same-day shipping must be received before noon. Small package orders marked for same-day shipping must be received before 2:00 p.m. CST. Same day shipping may not be available for TL or all LTL shipments.

Minimum order/invoice amount is $200.00USD. Orders that do not meet the minimum are subject to a $25.00 service fee, which will be added to the total amount invoiced.

Taprite will make every effort to ensure the accuracy of information in customer orders. We do reserve the right to make corrections or substitutions if errors occur. Prices and product specifications are subject to change without notice.

Returns unrelated to product defects may be subject to a 25% restocking fee. Such items must be returned unused, in original condition and include original packaging, documentation, warranty cards, manuals, and accessories. No special order or custom merchandise will be accepted for return. Before merchandise is returned to Taprite, for any reason, a Return Material Authorization (RMA) number must be obtained from our Customer Service Department (800-779-8488 or [email protected]). Please contact our Customer Service Department for further information on returns policy.

All catalogs and pricing editions produced by Taprite are for the wholesale beverage equipment trade only. All sales are strictly business-to-business.


44

Limited WarrantyTaprite warrants its products to be free of defects in material and or workmanship for a period of one (1) year, after the purchase by the customer from Taprite. During the one (1) year period the product must have been installed properly by a qualified technician and utilized in or on equipment compatible with said product. During the one (1) year period Taprite will, at its option, at no charge to the customer either repair or replace this product with a new or reconditioned product, but not labor to remove or re-install the product. This limited warranty does not include service to diagnose a claimed malfunction in this product at any location other than at Taprite headquarters, nor to repair damage due to accident or misuse, improper installation, incompatibility with chemicals or accessories not manufactured by Taprite. All other expressed and implied warranties for this product including the warranties of merchantability and fitness for a particular purpose are hereby disclaimed. (Some jurisdictions do not allow exclusion of implied warranties, nor limitations on how long an implied warranty lasts, so the above limitations may not apply to you) If this product is not free of defect as warranted above, your sole and exclusive remedy shall be repair or replacement as provided herein. In no event will Taprite be liable to customer or to third party for any damages in excess of the purchase price of the product. This limitation applies to damage of any kind including any direct or indirect damages, lost profits, lost investments capital or savings, other special incidental exemplary or consequential damages, whether for breach of contract, tort or otherwise, or whether arising out of the use or inability to use such product even if Taprite has been advised of the possibility of such damages or any other party.


45

NOTES


Taprite Draft Products Include:• CO2 Regulators (primary and secondary)• Nitrogen Regulators• Carbonation Testers• Couplers• Party Pumps• Beer Taps• Cleaning Equipment

Helping Companies

Profit From Every

Pour!

3248 Northwestern Dr., San Antonio, Texas 78238 800-779-8488 • Fax 210-646-6009

[email protected] • www.taprite.com

Made in USA

Don’t risk system failures with inferior equipment! Do it right – choose Taprite

3248 Northwestern Dr., San Antonio, TX 78238 • 800-779-8488

has proudly supplied the Beer Industry for over 65 years with Quality

and Value!

Contact us: 800-779-8488

[email protected] taprite.com

Date post:	08-Feb-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

BEER EQUIPMENT CATALOGd163axztg8am2h.cloudfront.net/static/doc/4b/69/670be3733...shutoff with check...

Documents