Tim
ing
Devi
ces
CT2 timing system is designed for maximum precision in neck and neck speed competitions as well as everyday training for fitness or simply fun. The device has several timing modes including a customizable customer specific function to meet the needs of any climbing center. Safety Engineering is certified by IFSC for an official timing system manufacturer.
TIMING MODES:
STOPWATCH TIMER FOR SPEED CLIMBING • With / without false-start control and reaction time measurement • Individual or synchronous start • Assisted Manual start or completely self-triggered Auto-start • Individual timer activated with start signal or when the climber’s
foot leaves the start-sensor• Configurable speaker volume
COUNTDOWN TIMER FOR LEAD CLIMBING • Configurable time limit • Self-triggered or manual mode • Option to announce last minute • Configurable speaker volume
COUNTDOWN TIMER FOR BOULDERING • Configurable time limit • Auto-rotation or manual mode • Option to announce last minute • Configurable speaker volume
TIMING SYSTEM FOR CLIMBING WALLS
TIMING SYSTEM CT2 COMPONENTS
Timer Display CT510D
Finish Sensor CTSF
Start Sensor (False start) CTSS
Timer Controller CT2C
CE RT IFIE D S P E E D TI ME R
MA
NU
FACT
URER
Interfaces: Power, Start Sensors,
Final Sensors, Audio Amplifiers,
Start Tone Speakers, Start LED Displays,
RS485 to displays,
optional RS232 to computer
Power: 12VDC / 1,25A
Dimensions: 610x220x70 mm (24x9x3 in)
Environment: IP30 -10 to 50°C (14 to 120 F)
Remarks: MANDATORY
Timer Display CT510D 5 digit LED / 7 seg-
ment LED display high brightness
Segment height: 100 mm
Interfaces: Power,
RS485 to CT2C timer controller
Power: 12VDC / 1,25A
Dimensions: 610x220x70 mm (24x9x3 in)
Environment: IP30 -10 to 50°C (14 to 120 F)
Remarks: MANDATORY
Precise capacitive touch sensor technologyContact: Closing contact when touchedEmbedded LED light indicatorDimensions: 220mm (9 in) diameterActive area: 150mm (6 in) diameterEnvironment: IP65, -20 to 50°C (-4 to 120F)Remarks: MANDATORY
Precise pressure sensitive technologyContact: Closing contact when stepping on it, opening contact when jumping off
Activation force > 7kg (15 lbs)Heavy duty vinyl surfaceAnti slip surfaceDimensions: 300x300 mm (12x12 in)Environment: IP65, -20 to 50°C (-4 to 120F)Remarks: MANDATORY
Tim
ing
Devi
ces
TIMER FOR AMUSEMENT CLIMBING STRUCTURES
Start LED Semaphore CTSD
Start Tone Loudspeaker
Start Push / Mode Selector Button FTSS-60
Push Start Button and Remote Control
For more details, visit www.safetyeng.eu
The Walltopia timing system is easy to install and is suitable for a wide variety of climbing and amusement activities. It is a great solution for competitions, training and time measurements for entertainment purposes. The simplicity of the system allows easy self-installation. It is designed to be easily embedded in the climbing wall panels and fits perfectly any indoor climbing facility.
COMPONENTS1. System electrical box.2. Timer display body3. Illuminated start / finish push-buttons.
*Exclusively designed for indoor use.
Illumnated push-buttons
System electrical box
Timer display body
Wireless Climbing Timer System Remote
Control
Embedded Push Start button
315 / 433MHz Wireless System
Operation Range: 100 m (328 ft)
Dimensions: 60x30x10 mm (2x1x0.4 in)
Remarks: MANDATORY
Transmit start tone, 10W speaker, PVC,
diameter 130mm (5 in)
Remarks: MANDATORY
3 x RGB LEDs
Start Beep Buzzer - optional
Embedded in HRT PU Composite Hold
Remarks: MANDATORY
Contact: Closing contact when pressed
Dimensions: 61x47 mm (2.4x2 in)
Environment: IP20, -10 to 50°C (14 to 120 F)Remarks: OPTIONAL
5 digit / 7 segment
LED display high brightness
Digit color: red
Segment height : 180 mm (7 in)
Segment width: 500 mm (20 in)
Contains the main AC/DC power supply
unit, safety switch and wiring terminal
that connects the button control with the
timer body.
The system box is fully wired and tested.
No additional set-up is required.
Main power cord length: 5 m (16 ft),
longer cord available upon request
Input power supply: 100-240V AC, 50-60 Hz
Can be installed anywhere on the wall
Size: diameter may vary from 50mm to
100mm (2 to 4 in)
Colors: various colors available
Auto
bela
ying
Dev
ices
ON BELAY AUTO BELAY DEVICE
Benefits• Reduces the staff needed
• Minimizes injury risks due to human error
• Attracts single and beginner climbers
• Makes novice lead climb training and rappel instruction safer
Features:• CE certified
• Fully redundant
• Fail safe in the event of: - Loss of pressure in the tank – sound & light alarm
system option - Loss of up to 50% of the hydraulic fluid - Hose rupture - Malfunction of an entire hydraulic cylinder
• Low maintenance costs – the only consumable that needs replacement is the steel cable once a year
• On-site serviceable – annual maintenance and inspection can be done on the spot
• Best long term investment
• Monitor for air pressure and oil level
OnBelay is a hydraulic automatic belay device that eliminates the need of a belayer. Designed and engineered to safely arrest a fall at any point of the route, the device automatically retracts the cable during ascend and slowly lowers the participant during descend.
TECH SPECSWeight: OnBelay08 - 60 kg (132lb); OnBelay11 - 75kg (165lb); OnBelay14 – 100kg (220lb)
Descent Speed: approx. 1.00m/s, (3’-3”/s)
Max. retract speed: approx. 1.50m/s, (5’/s)
Use for walls heights: Suitable for walls up to 17m (55 ft)
Brake: Air over hydraulic system with 2 pistons and orifice check valve
Type of cable: Steel cable DIN3069
Diameter of cable: 6 mm, (1/4”)
Safe load: 1 Person
Min. climber weight: 15kg, (33lb)
Max. climber weight: 150kg, (330lb)
2713 Sarah Str., Pittsburgh 15203, PA, USA | Phone: 916.835.2712 | [email protected] | www.walltopia.com