Belt ConveyorCovers
WORLD LEADER
Designing And Manufacturing Conveyor Covers since 1996www.capotex.com
Growing demands in terms of safety and the environment.Why cover a conveyor belt?
The reasons are innumerable, emphasizing the labor safety and the protection of equipment and materials, as well as the drastic reduction of the environmental impact in the transport of materials.
Economy and legal responsibility
Reduction in losses during transportation. Protection
of transported material.
Compliance with regulationsReduction of
disbursements derived from sanctioning
procedures.
Equipmentprotection
Reduction of maintenance costs.
Increased e�ciency in the transport of materials.
Environmentalprotection
Reduction of emissions.
Energy e�ciency of the facilities
Workers Safety
Reduction of the risk from work accidents.
Isolating the moving parts from the belt conveyor
avoids the risk of entrapments and other
accidents.
FormatsOur product
Materials
Cover lengths
Our product
Semicircular shape 180°.
Round cover without straight parts.
Full protection gallery.Tape and walkways.
The bonnet plus has an elliptical shape and therefore less height and less wind resistance.
Classic
Arch Capobig
Plus
Galvanized steel
Pre-lacquered steel
HPS 200Ultra
Stainless Steel Aluminum Polyesterfiber
1,064 mm corrugated1,292 mm corrugated
Available for galvanized steel 836 mm corrugated 456 mm corrugated
ModelsOur product
Patented design, versatility and strength have turned this model into an industry standard throughout the world of belt conveyors.
Madrid
Our most economic systems. Completely closed: the cover covers 180º, up to the conveyor belt frame.
Dakar
Inspection access from one side: the cover covers the upper part and one side of the conveyor belt, leaving one side free for maintenance.
Durban
Roof-type cover installed to cover only the upper part of the conveyor belt.
Capoarc
This design was created for installation in cases in which access from both sides of the belt was not possible.
París
Inspections accesses on both sides: the cover only covers the upper part of the belt, leaving both sides free for maintenance.
Berlín
ModelsOur product
Return belt enclosure: Eliminates return belt misalignment due to external wind pressure.
Caposide
Cover adapted to any fire-extinguishing system available on the market.
Capofire
Fully sealed with the belt and cover.
Caponoise
Total access to the interior.
Capobig
Safety protection: Prevents from accidental manipulation of the return belt.
Capotray
Auto-adaptable to belt movement.
Caposkirt
FixingsOur product
C1 Lock Hinge C2 Standard Hinge
C5 Self-Drilling Screw C6 Clamp
C7 Ergonomic Hook with Strap
C8 Ergonomic Hook with Pin
C9 Hook
Engineering and innovation at the service of protection.Capotex, in evolution since 1996
Capotex is a leading company specialized in the design, manufacture and commercialization of advanced protection systems for the protection of conveyor belts, installations and people.
The recognition of excellence and innovation has materialized with various awards and distinctions, such as the SMOPYC Award for Innovation, obtained in 2008 and 2014.
About usWorl Leaders
Since 1996, Capotex has designed, manufactured and marketed more than 450,000 meters of covers in more than 50 countries, being a world leader in its sector.
Estados Unidos
USA
Brazil
Russia
Honduras
Panamá
Guadalupe
Norway
Sweden
Finland
Colombia
Perú
Chile
Canada
UK
LetoniaLituania
Switzerland
Austria
Polonia Rep. ChecaHungría
SlovakiaSlovenia Croatia
Bulgaria
Holland
Belgium
Germany
FranceSpain
Morocco
Algeria
South Africa
Togo
Tanzania
Kenia
Arab Emirates
IndiaHong Kong
South Korea
Malaysia
Australia
Italy
Túnez
Cyprus
Greece Turkey
Map+50 countries
WORLD LEADER
Designing And Manufacturing Conveyor Covers since 1996www.capotex.com
HeadquartersColombia, 1 - 28220 Majadahonda. Madrid. Spain
Tel: +34 91 634 71 92 - Fax: +34 91 636 21 15
Smopyc Technological InnovationGolden Medal 2008 & 2014
For a cleaner Planet.