Belt Conveyor Machines
Special purpose belt conveyor machine for the etching of concrete paving slabs, block paving and kerb stones. The machine is fitted with 3 wheel units and can be manually fed or integrated with automatic handling equipment.
Type: 3DCB1000SK
Your Global Resource for Shot Blasting Equipment
www.pangborngroup.com
Etching_BeltConveyor_PSES_2013.indd 1 12.09.2013 10:55:57
Belt Conveyor MaChines
technical Data, Features & Benefits
Please contact us for more information or visit us at: www.pangborn.com
or www.pangborngroup.com
Pangborn-SES LimitedPark Works, Bagillt Road,
Greenfield, Holywell,Flintshire CH8 7EP - UK
Phone: +44 (0) 1352 712412Fax: +44 (0) 1352 710937
Email: [email protected]
Blast Wheel Type Pangborn RIM-LOC 8 Vane type Reversible Rotoblast wheels, achieve faster cleaning and feature the easiest and quickest maintenance Vane change in the industry.
Blast Wheel Speed Variable from 2200 to 3800 RPM when fitted with optional electronic inverter control
Abrasive Control System Individual quadrant valves on each wheel activated by sensor or manual push button.
Blast Cabinet Protection Cross rolled manganese steel.
Blast Cabinet Floor High chrome alloy steel perforated floor plates.
Abrasive Recovery System Heavy duty screw conveyors, belt and bucket elevator and rotary sieve type airwash unit.
Additional Abrasive Cleaning Cyclone units and magnetic separators can be fitted, these require an increase capacity dust arrester.
Model 3DCB1000SK
Wheel Units 3 @ 11.0 kW
Elevator & Main Screw 1 @ 2.2 kW
Rotary Sieve 1 @ 1.5 kW
Inlet Screw 1 @ 0.75 kW
Outlet Screw 1 @ 1.1 kW
Conveyor Belt 1 @ 1.5 kW
Airknife Fan 1 @ 11.0 kW
Dust Arrester 1 @ 15.0 kW
Magnetic Separator (optional) 1 @ 0.25 kW
Compressed air for shot control and dust arrester pulsing 40 m³hr @ 5.5 bar
Maximum Component Width 1000 mm
Maximum Component Height 300 mm
Maximum Component Weight 150 kg/m
The minimum component size is limited by a combination of the component weight and size of blast wheel motor fitted as well as the blast wheel speed.Throughput speed is dependent on age of component, depth of etch required and wheel motor size fitted. Typical speeds are between 1 m and 6 m per minute.Other Belt Conveyor Machine models and versions are available, tailored to customer’s needs.
Etching_BeltConveyor_PSES_2013.indd 2 12.09.2013 10:56:00
