Telephone : 1800 006 260
Email - [email protected]
www.pacojaanson.com.au
Retail Pricing : Satin
CRYG19-LH-S $420.00
Dimensions : 675mm (w) x 86mm (d) x 1110mm (h)
Overall dimensions : 752mm (w) x 86mm (d) x 1177mm (h)
B E N E L L I C A R E
90o Shower T Grab Rails - High Grade Satin Stainless Steel
Available in left side and right side con�gurations
PRICING STRUCTURE
The Paco Jaanson Care range is committed to providing
innovative solutions formed through knowledge and
insight to ensure critical living hubs like bathrooms are
designed to fully consider the needs of users and their
carer’s, to maximise independence and a greater degree
of user comfort, dignity, respect & safety.
Their aged care and disability solutions are adaptable
and allow �exibility when renovations or redesign
is being considered. Benelli puts the user �rst so you
can choose Paco Jaanson with con�dence.
Satin with knurl
CRYG19-LH-SK $470.00
CRYG19-RH-S $420.00 CRYG19-RH-SK $470.00
DESCRIPTION
PACO JAANSON BATHROOM INNOVATIONS
7 Y
E A R S
Features
32mm diameter 304 satin stainless steel
Snap �ange cover conceals �xings
Fixings by others
High grade stainless steel - Satin �nish
Left side ( CRYG19-LH-S )
Right side ( CRYG19-RH-S )
Knurl option for better grip
Left side ( CRYG19-LH-SK )
Right side ( CRYG19-RH-SK )
7 Years Limited Manufacturers Warranty
1 Year Limited Commercial Warranty
Suitable for installation to comply
to Australian Standard AS 1428.1-2009
Amendment No.1 Design for access
and mobility
Hand shower, hose, elbow and sliding bracket
optional extra ( CR-850-KIT )
Copyright © 2019. All rights reserved. Updated: 1st April 2019.
90o shower T
grab rail - satin
90o shower T
grab rail -
satin with knurl
675
LEFT SIDE CONFIGURATION
76
76 86
8676
63
175
944 1100
55
388
R48
O77 O32
O32
Telephone : 1800 006 260
Email - [email protected]
www.pacojaanson.com.au
B E N E L L I C A R E
90o Shower T Grab Rails - High Grade Satin Stainless Steel
Paco Jaanson 90o shower grab rails are guaranteed for 7 years from date of purchase subject to the following conditions:
FULL WARRANTY & CONDITIONS
www.pacojaanson.com.au
Available in left side and right side con�gurations
PACO JAANSON BATHROOM INNOVATIONS Copyright © 2019. All rights reserved. Updated: 28th March 2019.
WARRANTY STATEMENT
To the extent permitted under the Trade Practices Act and other relevant legislation, Paco Jaanson’s liability is limited to:
LIMITATIONS
1. Installation has been carried out by a licensed plumber in accordance with the plumbing code of Australia.
2. All maintenance and adjustments to the product after the installation have been carried out by a licensed plumber.
3. Only mild household detergents and soft (non-abrasive) cloth has been used to clean the product.
4. All goods of substandard quality manufacture will be credited or replaced by Paco Jaanson when advised within the warranty period, subject to
prior inspection and agreement.
5. Proof of purchase is required for warranty claims.
The cost of replacing the goods, or The cost of obtaining equivalent goods, or The cost of having the goods repaired. Paco Jaanson is not responsible
for any lack of operation or performance of goods (or any loss or damage) where goods are used or adapted for a with other goods not supplied by
Paco Jaanson. It is the responsibility of the customer and installer before installation to ensure are correct and free of obvious visible faults.
Paco Jaanson is not responsible for the labour and recti�cation costs incurred in the above circumstance.
DIMENSIONS IN MILLIMETRES
www.standards.org.au
Suitable for installation to comply to Australian Standard AS 1428.1-2009
Amendment No.1 Design for access and mobility
ACCESS AND MOBILITY
All installations should be carried out by a quali�ed tradesman in compliance with the national Plumbing & Drainage Code
and any State or Local Authority Regulations, in accordance with AS/NZS 3500 series of standards and AS/NZA 6400.
Top of seat 470 to 480
Optionalextension
FoldingSeat
Wall outletplus back-�owpreventiondevice
Shower head support grabrail with portable
shower head
Bottom of showerhead support grabrail1000 to 1100
Top of showerhead support grabrail
1880 to 1900
Top of zone 1100 max.
Bottom of zone 900 min.Top of grabrail800 to 810
Showerheadsupport
Zone for taps and soapholder with 50 min. clearance around shower support rail
660 min.390 to 400
800 max.
50 min.
50 min.
300
min.
580 to 600
1160 min.
Retail Pricing : Satin
CRYG19-LH-S $420.00
PRICING STRUCTURE
Satin with knurl
CRYG19-LH-SK $470.00
CRYG19-RH-S $420.00 CRYG19-RH-SK $470.00
90o shower T
grab rail - satin
90o shower T
grab rail -
satin with knurl
SHOWER RECESS FITTINGS—ELEVATION
7 Y
E A R S
LEFT SIDE CONFIGURATION
