BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 1 of 12.
Invitation of Bids in Two Bid System for setting up HDPE Plant and provide training to produce HDPE
Bottles and Containers at BCPL Panihati Plant located at B. T. Road, Panihati, North 24PGNs,
West Bengal – 700114.
Tender No: BCPL/HDPE Plant/ET/01/2021-2022, Dated: 04.10.2021
BENGAL CHEMICALS &PHARMACEUTICALS LTD
(A Govt. of India Enterprise)
Regd.Off: 6, GANESH CHUNDER AVENUE, KOLKATA – 700 013
PH: 033-22371525/26 FAX: 033-2225 7697
Bengal Chemicals and Pharmaceuticals Limited (A Govt of India Enterprise) invites bids from interested and reputed HDPE plant manufacturers/ Authorised Supplier of to set up HDPE plant & train BCPL employees to produce HDPE bottle and containers at our Panihati, Kolkata Works as per terms and conditions stated in this tender. Kindly submit your bid in two bid system (Technical and Commercial) in separate sealed envelope kept inside the main envelope superscibed with tender no, tender date and tender due date to be submitted in our tender box within the stipulated time.
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 2 of 12.
BCPL BACKGROUND NOTE:
Bengal Chemicals & Pharmaceuticals Ltd (BCPL) is the oldest Pharmaceutical Company in the country .It was
established by Acharya P C Ray in 1901. From humble beginning with one factory in Manicktala (Kolkata) in 1905.
Three more factories were Established – One at Panihaty (North 24 Parganas, West Bengal) in 1920, one at
Mumbai in 1938 and one at Kanpur in 1949 with its registered office at 6 Ganesh Chunder Avenue, Kolkata. The
company expanded and diversified into a multi product conglomerate, having three divisions viz Division –I
(Chemicals ) , Division –II (Drugs &Pharmaceuticals) and Division-III (Cosmetics and Home products).
Please feel free to contact the undersigned on
E-mail: [email protected] / [email protected] website: www.bengalchemicals.co.in.
Eoi & Bid No & Date: BCPL/HDPE Plant/ET /01/2021-2022
Dated: 04.10.2021
LAST DATE AND TIME FOR RECEIPTOF BIDS 25.10.2021 to 15.00 Hrs
TIME AND DATE OF OPENING OF TECHNICAL BIDS
25.10.2021 to 15.15 Hrs
Mode of Tender E-Tender in ITI site with Rs.(3500 +GST @18% extra) as a tender fee in Two Bid
System.
(Technical & Commercial) E - Procurement
System
(Online Part I - Techno-Commercial Bid and Part II - Price Bid
throughhttps://bcpl.euniwizarde.com bcpl of ITI Ltd. The intending bidders are required to submit their offer Electronically through e-tendering
portal. No physical tender is acceptable.
To submit at BCPL Corporate Office at
6, Ganesh Chunder Avenue, Kolkata – 700 013.
Ernest Money Deposit Rs. 5,00,000/- In the form of DD in favor of Bengal Chemicals and
Pharmaceuticals Ltd, Payable at Kolkata.
ADDRESS FOR COMMUNICATION Manager (Purchase),
Bengal Chemicals & Pharmaceuticals Limited
6, Ganesh Chunder Avenue, Kolkata-700 013
West Bengal, India. Email ID for communication [email protected],
Web Address www.bengalchemicals.co.in
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 3 of 12.
1. Selection Criteria / Content of Technical Bid: Documentary Evidence to be submitted in technical bid for supporting the following to qualify technically. Technically unsuccessful bidders price bid will not be evaluated. A. Bidder should have similar job experience. Copy with successful completion certificate to be submitted. B. Net Worth should be positive in last 3 financial years, copy of audited P&L account to be submitted for the same. C. Minimum of Rs. 1.00 Crore average turn-over should be there in last three financial year. D. All Statutory documents like, copy of trade license, GST, PAN, PF, ESI to be submitted in technical bid. E. registration of MSME and Startup to be submitted to avail MSME and Startup benefits as per statute. 2. Price / Content of Price Bid: Bidders should quote the total Cost for setting up the plant and offer sufficient training to BCPL stuff for 3months to produce the HDPE bottle and containers. Bidder must quote the price in figure and word in bidders letter head duly signed and stamped and put in the price bid envelop. Price bid envelop should contain only the price bid, no other documents to submit inside the price envelop.
1. Selection Criteria: Only technically qualified bidders price bid will be evaluated and the lowest will be awarded
the contract.
2. EMD: Un-successful bidder’s EMD will be returned within 15days of awarding the contract. Successful bidders submitted total EMD will be converted to security deposit till the time of handing over the plant to BCPL post successful completion of training which will be treated as period of contract, on successful completion of the project the EMD will be returned without any bank interest.
3. Micro and Small Scale industries can avail EMD exemption against submission of Micro / small scale industries registration certificate from appropriate authority.
4. Payment Terms:
1) 10% as Mobilization advance against Bank Gurantee. 2) 60% payment will be released within 30 days of project completion which includes machinery supply,
installation and satisfaction certified by BCPL. 3) Payment will be made on submission of RA Bill after certification of concerned /Authorized officer. 4) 20% within 30 days of commissioning, training, trial production and handing over the site to BCPL. 5) 10% after the warranty period of all machineries supplied.
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 4 of 12.
6) RIGHTS OF BCPL
(i) BCPL reserves the right to accept / reject the offers received without assigning any reasons whatsoever, or may call for any additional information / clarification if so required.
(ii) BCPL reserves the right to limit or delete any item mentioned in this document and extend the last date of submission of this Tender.
(iii) Decision of BCPL will be final.
17. Arbitration: In the case of dispute/difference between two parties- a) Dispute shall be resolved by mutual consultation. b) Unresolved dispute shall be referred to Managing Director, BCPL. MD BCPL is having the sole right to
appoint an Arbitrator and decisions of the Arbitrator will be binding on parties of the dispute.
18. COURT JURISDICTION: This shall be subject to the exclusive jurisdiction of courts at Kolkata, India.
Project Profile:
Product – 1.1 500 ml HDPE Blow moulded bottle Product Specifications Bottle weight - 60 gms, Diameter – 75mm, Height -185 mm Application – For Phenol packaging Product – 1.2 Injection moulded Outer Cap for 500 ml
3 gms weight; Material - HPDE Injection Grade Product – 1.3 Injection moulded inner Cap 1.3 gms Weight; Material - LLDPE Injection Grade Production requirement – 07 lakhs each component per month
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 5 of 12.
Product –2 1 Ltr HDPE Blow moulded Jar (Rectangular) Product Specifications Weight – 100 gms Height - 170mm Width -142 mm Application – For Phenol packaging Product – 2.1 Injection moulded Outer Cap for 1 Ltr HDPE Blow moulded Jar
Product Weight:2.5 gms; Material - HPDE Injection Grade Product – 2.2 Injection moulded inner Cap 1 Ltr HDPE Blow moulded Jar Product Weight:1.2 gms; Material - LLDPE Injection Grade Production requirement – 05 lakhs each component per month
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 6 of 12.
Product –3.1 5 Ltr HDPE Blow moulded Jar (Rectangular) Product Specifications Weight – 350 gms Height - 300mm Width -240 mm Application – For Phenol packaging Product – 3.2 Injection moulded Outer Cap for 500 ml
Product Weight:6.2 gms; Material - HPDE Injection Grade Product – 3.3 Injection moulded inner Cap Product Weight:3.5 gms; Material - LLDPE Injection Grade Production requirement – 02 lakhs each component per month
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 7 of 12.
Product –4.1 20 Ltr HDPE Blow moulded Jar (Rectangular) Product Specifications Weight – 1220 gms Application – For Phenol packaging Product –4.2 Injection moulded Outer Cap for 500 ml Product Weight: 34 gms; Material - HPDE Injection Grade Product – 4.3 Injection moulded inner Cap
Product Weight: 11 gms; Material - LLDPE Injection Grade Production requirement – 20000 nos each component per month.
Scope of Job:
The project envisages setting up a unit for the manufacture of HDPE bottles/ containers along
with sufficient training of 3months to BCPL employees.
Contract awarded party to procure, supply and install all types of machineries required for the
project by their own along with Raw Materials required for the production during the training
period of 3months.
Setting up a HDPE Blow unit to manufacture plastic blow moulded containers of sizes from 500
ml to 20 liters capacity.
Setting up of Injection Moulding machines for production of Inner& Out Cap for the blow moulded
containers.
The production is considered on 22 hrs on @ 3 shift basis and the working days in a month
are 25 and that of per annum is 300 at optimum machine capacity.
Land will be provided by BCPL, The Project location of M/s. BCPL, Kolkata which has all the
basic infrastructure facilities and excellent road connectivity. The total land available for this
project is maximum 1 acre and the built-up area to be built by contract awarded bidder is
20,000 sq ft.
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 8 of 12.
The plastic blow moulded containers to be made from HDPE / LDPE / PP as the case may be.
S. No. Description of the product Monthly
Requirement (nos.)
1.
500ml bottle
Bottle weight - 60 gms, Diameter – 75mm,
Height -185 mm,
Injection Graded - Outer cap- 3 gms weight; Material -HDPE inner Cap 1.3 gms Weight; Material - LLDPE
07 lakhs
2.
1 ltr Bottle
Weight – 100 gms Height - 170mm
Width -142 mm.
Injection Graded - Outer cap-2.5 gms weight; Material -HDPE inner Cap 1.2 gms Weight; Material - LLDPE
05 lakhs
3.
05 ltr Jar
Product Specifications Weight – 350 gms Height - 300mm Width -240 mm Injection Graded - Outer cap-6.2 gms weight; Material -HDPE inner Cap 3.5 gms Weight; Material - LLDPE
02 Lakhs
4.
20 Ltr Jar - weight -1220 gms.
Injection Graded - Outer cap- 34 gms weight; Material -HDPE inner Cap 11 gms Weight; Material - LLDPE
20,000 nos.
Time Scale for setting up the Plant:
The Plant to be setup within a stipulated period of 6 - 8 months.
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 9 of 12.
PROPOSED PLANT & MACHINERY: The Capacity of the Bottles with respect to the proposed machinery requires as follows:
Product Name of Machine No of
Stations
Approx.
Output of
Machine
500ml
bottle
Hydraulically Operated Double
Station Fully Automatic Extrusion
Blow Moulding Machine with Auto De-
Flashing, Bobbing Extruder &
Hydraulic Blowing for Processing of
HDPE Bottles with Beckhoff Display
Double
Station Fully
Automatic
11 bottles /
per minute
1 ltr Bottle
Hydraulically Operated Double
Station fully Automatic Extrusion Blow
Moulding Machine for Processing of
HDPE Bottles
Double
Station Fully
Automatic
4 jar / min
05 ltr Jar
Hydraulically Operated Double Station
Fully Automatic Extrusion Blow
Moulding Machine with Hydraulic
Blowing for processing of HDPE
Bottles.
Double
Station Fully
Automatic
3 product /
min
20 Ltr Jar
15LTR. Fully Automatic Extrusion
Blow Moulding Single Layer Machine
with FIFO Acc. Head of 2 Kg. Bottom
Blowing, Stretching Unit, B&R TMC
with 100 pt. Parison Control for
Processing of Jerry Cans.
Single
Station
1 product / 2
mins
Note : Bidders may visit proposed site and ask for available samples from our Panihati factory before participation.
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 10 of 12.
The major equipment required by the unit for HDPE bottles are as follows:
S/No. Description Qty.
(nos)
1. 02 Ltr Hydraulically Operated Double Station Fully Automatic Extrusion Blow Moulding 2000/H/2/Advanced
06
2. 05 Ltr, Hydraulically Operated Double Station Fully Automatic Extrusion Blow Moulding Machine 5000/H/2/Advanced
02
3. 15 Ltr, Fully Automatic Extrusion Blow Moulding Single Layer Machine
01
4. Injection Moulding Machine 130T & 180T 03
5. Injection Moulds for 16/32 cavity Injection moulds 08
6. Aluminum Blow Moulds for 450ml,1 ltr,5 ltr,20 ltr 06
7. Air Compressor 261 Cfm 2
8. Cooling Tower -200 Tr 1
9. Scrap Grinders 10”& 12& 18” inch 5
10. Materials Hopper Loader 11
11. Materials Mixer 2
12. Forklift 1
13. Trolley 1
14. Chain Pulley Grant 2 Ton , Hyd. Stacker, Lifting euip.
15. Other Accessories for Machines -
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 11 of 12.
Proposed Plant Layout:
BENGAL CHEMICALS & PHARMACEUTICALS LTD. (A GOVT. OF INDIA ENTERPRISE)
Purchase Dept.: 6, Ganesh Chunder Avenue, Kolkata 700 013
CIN No: U24299WB1981GOI033489 PHONE 033 2237 1525 / 1526 Website: www.bengalchemicals.co.in
[EOI No. BCPL/HDPE Plant/01/2021-2022] Page 12 of 12.
Price Bid Format: Bidder must quote their price in the following format, printed on bidder letter head duly signed and stamped.
# Contract will be awarded to the L1 bidder, L1 will be based on Total Cost for the HDPE project.
# Contact Person Mr. Sudipta Koyal Mob# 8240069232
---------------------End of Document-----------------
S.No. Description Quoted price in Rs.
1. Land Development
2. Building and Civil Works including PEB Sheds
3. Plant and Machinery
4. Electrification
5. Price of Installation, Commissioning & validation
6. Training to BCPL Employees including the RM cost of trial production.
Total Cost for the HDPE project in Rs. (in Figure)
Total Cost for the HDPE Project in Word: