+ All Categories
Home > Documents > Benzene Specification

Benzene Specification

Date post: 24-Mar-2015
Category:
Upload: lalita-khakhlary
View: 168 times
Download: 3 times
Share this document with a friend
1
Reliance Industries Limited, Maker Chambers IV, Nariman Point, Mumbai. 1 Benzene Product Specification SR.No Parameter Unit Specification 1 Benzene Purity Wt% 99.95 min 2 Appearance - Clear, colourless liquid, free of sediments or Haze 3 Colour Pt/Co 10 max 4 Specific Gravity @ 15.5/15.5 0 C - 0.882-0.886 5 Bromine Index mg/100g 10 max 6 Solidification point 0 C 5.45 min 7 Distillation range 1 to 96% 0 C within 1.0 0 C (including 80.1 0 C) 8 Water - No free water 9 Moisture Wt ppm 300 max. 10 Acid Wash Colour - 1 max 11 Toluene Wt ppm 200 max 12 Non Aromatics Wt ppm 400 max 13 Thiophene Wt ppm 0.6 max 14 Total Sulphur Wt ppm 1 max 15 Total Chlorine (as chlorides) Wt ppm 3 max 16 Total Nitrogen Wt ppm 0.8 max The customers are advised to contact Chemical Business Department for detailed Specification
Transcript
Page 1: Benzene Specification

Reliance Industries Limited, Maker Chambers IV, Nariman Point, Mumbai. 1

Benzene Product Specification

SR.No Parameter Unit Specification 1 Benzene Purity Wt% 99.95 min 2 Appearance - Clear, colourless liquid, free

of sediments or Haze 3 Colour Pt/Co 10 max 4 Specific Gravity @ 15.5/15.50

C - 0.882-0.886

5 Bromine Index mg/100g 10 max 6 Solidification point 0C 5.45 min 7 Distillation range 1 to 96% 0C within 1.0 0C

(including 80.1 0C) 8 Water - No free water 9 Moisture Wt ppm 300 max.

10 Acid Wash Colour - 1 max 11 Toluene Wt ppm 200 max 12 Non Aromatics Wt ppm 400 max 13 Thiophene Wt ppm 0.6 max 14 Total Sulphur Wt ppm 1 max 15 Total Chlorine (as chlorides) Wt ppm 3 max 16 Total Nitrogen Wt ppm 0.8 max

The customers are advised to contact Chemical Business Department for detailed Specification

Recommended