1
Designed by Jason Bernard, MB, MD, FRCS Bernard Spinal Alignment Block Designed to act as a right angle “set square”, using stock sterile rods, to help assess intraoperative mechanical axis of the spine PRODUCT NO: 5006 Dimensions: 5cm x 5cm x 1cm Rod Holes: 5.5mm, 6.0mm & 6.35mm Holes of 5.5mm, 6.0mm, and 6.35mm are drilled at right angles through the block on the 1cm high faces. Two sterile stock rods can be inserted into the holes to create the "set square". MADE IN THE USA PROUDLY FREE TRIAL ON MOST INSTRUMENTS 1.800.548.2362 103 Estus Drive, Savannah, GA 31404 www.innomed.net [email protected] 912.236.0000 Phone 912.236.7766 Fax © 2012 Innomed, Inc. Innomed-Europe Tel. +41 41 740 67 74 Fax +41 41 740 67 71 FREE TRIAL ON MOST INSTRUMENTS 1.800.548.2362 103 Estus Drive, Savannah, GA 31404 www.innomed.net [email protected] 912.236.0000 Phone 912.236.7766 Fax Innomed-Europe Tel. +41 41 740 67 74 Fax +41 41 740 67 71 © 2013 Innomed, Inc. Scan to Launch Our Website ISO 9001:2008 • ISO 13485:2003
