BBCFThe Model BBCF Bulkhead Connection Kit provides standard nut and ferule tubing connections to a protected enclosure for a purging or pressurization system’s supply and reference tubing. The Model BBCF consists of one 1/4” through wall stainless steel bulkhead fitting for atmospheric reference and one 1/4”, 3/8” or 1/2” through wall stainless steel bulkhead fitting, depending on model selected, for the supply connection to the protected enclosure.
BFCFThe Model BFCF Bulkhead Connection Kit provides standard nut and ferule tubing connections to a protected enclosure for a purging or pressurization system’s supply and reference tubing. The Model BFCF consists of one 1/4” flush mount stainless steel bulkhead fitting for atmospheric reference and one 1/4”, 3/8” or 1/2” through wall stainless steel bulkhead fitting, depending on model selected, for the supply connection to the protected enclosure.
FFCFThe Model FFCF Bulkhead Connection Kit provides standard nut and ferule tubing connections to a protected enclosure for a purging or pressurization system’s supply and reference tubing. The Model FFCF consists of one 1/4” flush mount stainless steel bulkhead fitting for atmospheric reference and one 1/4”, 3/8” or 1/2” flush mount stainless steel bulkhead fitting, depending on model selected, for the supply connection to the protected enclosure.
EPCThe Model EPC Enclosure Pipe Connection Kit provides an NPT connection to a protected enclosure for piping between multiple purged or pressurized enclosures. The Model EPC consists of two 3/4”, 1 1/4” or 1 1/2” flush mount zinc die cast bulkhead fittings.
Model # BBCF - A2Connection Kit ModelBBCF- Through Wall Bulkhead Connection KitBFCF- Through Wall & Flush Bulkhead Connection KitFFCF- Flush Bulkhead Connection KitEPC- Enclosure Pipe Connection KitCompatible SystemsA2- All YZ101A & YZ102 ConfigurationsB3- All YZ101B & YZ103 ConfigurationsC4- All YZ101C & YZ104 Configurations
Model Number Matrix
Best Purging Systems Corporation www.purgeit.com 4725 Lawndale • La Marque, Texas 77568 Phn: 844.PURGE IT Specifications subject to change without notice, warranty & liability statements available upon request.
Model: EPCHub & Locknut: Zinc Die CastInsulating Throat: ThermoplasticSealing Ring: BUNA “N” Nitrile
→
→
Enclosure Supply Tubing from Purge/Pressurization Unit
Enclosure ReferenceTubing to Purge/
Pressurization Unit
ProtectedEnclosure
Typical Enclosure Connections
Model BBCF
→
→
Enclosure Supply Tubing from Purge/Pressurization Unit
Enclosure ReferenceTubing to Purge/
Pressurization Unit
ProtectedEnclosure
Model BFCF
→
→
Enclosure Supply Tubing from Purge/Pressurization Unit
Enclosure ReferenceTubing to Purge/
Pressurization Unit
ProtectedEnclosure
Model FFCF
A2 B3 C4BBCF - One (1) eachSupply 1/4” 3/8” 1/2”Reference 1/4” 1/4” 1/4”BFCF - One (1) eachSupply 1/4” 3/8” 1/2”Reference 1/4” 1/4” 1/4”FFCF - One (1) eachSupply 1/4” 3/8” 1/2”Reference 1/4” 1/4” 1/4”EPC - Two (2)Pipe Connection 3/4” 1-1/4” 1-1/2”
Connection Kits Fitting Sizes Chart
→
→Allows
continuation of Supply &
Reference Tubing within Protected
Enclosure to preferred locations
of supply and reference
→ →Allows
continuation of Supply Tubing
within Protected Enclosure to a
preferred location for supply
→Enclosure Supply Pipe
between Enclosures
ProtectedEnclosure
Model EPC
Terminates Supply & Reference
Tubing at Protected Enclosurebulkhead
ProtectedEnclosure
Allows connectionof Supply Pipe
between multiple Protected Enclosures
Model EPC is intended for use between any quantity of multiple enclosures with any connection fitting kit above that will provide supply tubing from a Purge or Pressurization Unit to the first enclosure in the series and the
reference tubing from the last enclosure in the series
