+ All Categories
Home > Documents > Best Start Chick Feeder FE300, Optional Hooked Extender with … · 2017-01-27 · part #...

Best Start Chick Feeder FE300, Optional Hooked Extender with … · 2017-01-27 · part #...

Date post: 27-Jul-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
1
Quick Sheet Instructions U:\MANUALS\990000\990009 JDS / AGF 6-11-2012 Internaonal: Phone: (+1) 419.678.8731 Fax: (+1) 419.678.2200 Email: [email protected] North America: Phone: 800.99VALCO (800.998.2526) Fax: 419.678.2200 Email: [email protected] FE300 WITH EXTENSION AND CAP BASIC CHICK FEEDER (USED IN ALL MODELS) Figure 3 Figure 4 PART # DESCRIPTION QTY INTERCHANGEABLE PARTS FE310 SPOOL FOR BEST START CHICK FEEDER 1 FE320 DROP FOR BEST START CHICK FEEDER 1 FE300NUT #8-32 SQUARE NUT, 11/32”WD X 1/8” THR SS 1 FE300SCR #8-32 x 3/4 “ PHILLIPS ROUND 188 SS 1 FE300TAPSCREW NO.4 X 3/4”LONG PAN HD SHT METAL SCR SS 1 FE300 - BEST START CHICK FEEDER FE330 EXTENDER FOR BEST START CHICK FEEDER 1 FE340 CAP FOR EXT. FOR BEST START CHICK FEEDER 1 FE300CR - BEST START CHICK FEEDER W/CROWN SLEEVE FE350 HOOKED EXTENDER FOR BEST START FEEDER (USE WITH FE360) 1 FE360 CROWN SPREADER FOR BEST START FEEDER (USE WITH FE350) 1 Installaon 1. Spread the FE310 SPOOL and slip onto the feed tube, as shown in Figure 1. (BE SURE THE HOLE IN THE SPOOL ALIGN WITH THE FEED DROP HOLE IN THE FEED TUBE). 2. Then insert the FE300TAPSCREW into the hole along the side of the SPOOL provided and secure, as in Figure 2. 3. Slide the FE320 DROP onto the FE310 SPOOL, slightly spreading the DROP, over the center, between the flanges of the SPOOL, as shown in Figure 3. 4. Secure with FE300SCR and FE300NUT, as in Figure 4. 5. Slide the Oponal Extender FE 330 or the Oponal Hooked Extender FE350 and Crown Spreader FE360 onto the end of the FE320 DROP unl it snaps into place. Best Start Chick Feeder FE300, Oponal Hooked Extender with Crown FE300CR, Figure 1 Figure 2 FE300CR WITH HOOKED EXTENDER AND CROWN (SHUT-OFF)
Transcript
Page 1: Best Start Chick Feeder FE300, Optional Hooked Extender with … · 2017-01-27 · part # description qty interchangeable parts fe310 spool for best start chick feeder 1 fe320 drop

Quick Sheet Instructions

U:\MANUALS\990000\990009JDS / AGF 6-11-2012

International:Phone: (+1) 419.678.8731Fax: (+1) 419.678.2200Email: [email protected]

North America: Phone: 800.99VALCO (800.998.2526)Fax: 419.678.2200Email: [email protected]

FE300 WITH

EXTENSION AND CAP

BASIC CHICK FEEDER(USED IN ALL MODELS)

Figure 3

Figure 4

PART # DESCRIPTION QTYINTERCHANGEABLE PARTS

FE310 SPOOL FOR BEST START CHICK FEEDER 1FE320 DROP FOR BEST START CHICK FEEDER 1

FE300NUT #8-32 SQUARE NUT, 11/32”WD X 1/8” THR SS 1FE300SCR #8-32 x 3/4 “ PHILLIPS ROUND 188 SS 1

FE300TAPSCREW NO.4 X 3/4”LONG PAN HD SHT METAL SCR SS 1FE300 - BEST START CHICK FEEDER

FE330 EXTENDER FOR BEST START CHICK FEEDER 1FE340 CAP FOR EXT. FOR BEST START CHICK FEEDER 1FE300CR - BEST START CHICK FEEDER W/CROWN SLEEVE

FE350 HOOKED EXTENDER FOR BEST START FEEDER (USE WITH FE360) 1

FE360 CROWN SPREADER FOR BEST START FEEDER (USE WITH FE350) 1

Installation 1. Spread the FE310 SPOOL and slip onto the feed tube, as

shown in Figure 1. (BE SURE THE HOLE IN THE SPOOL ALIGN WITH THE FEED DROP HOLE IN THE FEED TUBE).

2. Then insert the FE300TAPSCREW into the hole along the side of the SPOOL provided and secure, as in Figure 2.

3. Slide the FE320 DROP onto the FE310 SPOOL, slightly spreading the DROP, over the center, between the flanges of the SPOOL, as shown in Figure 3.

4. Secure with FE300SCR and FE300NUT, as in Figure 4.

5. Slide the Optional Extender FE 330 or the Optional Hooked Extender FE350 and Crown Spreader FE360 onto

the end of the FE320 DROP until it snaps into place.

Best Start Chick Feeder FE300, Optional Hooked Extender with Crown FE300CR,

Figure 1Figure 2

FE300CR WITH HOOKED

EXTENDER AND CROWN

(SHUT-OFF)

Recommended