~lJet'_;SValid until 15/12/2016

Ac_Neutro_Exp_2 e3 .indd 2 23/11/15 14:25

1

ContenitoriIndex

Assortments 15÷16Bits 25Containers 2÷14Cutting tools 36÷37Drilling and threading tools 38Electrotechnics 44÷46General maintenance tools 48÷53Hammers and chisels 35Male-end wrenches 23÷24Measuring tools 39Pliers 32÷33Plumbing tools 42÷43Pullers 40÷41Screwdrivers 34Sockets 26÷29Stainless steel tools 47Thermoformed trays 16÷19Torque wrenches 30÷31Wrenches 20÷22

AUTOMOTIVEBattery 57÷59Brakes 68Diagnostics 54÷56Engine 60÷67Lifting 70÷77Wheels 69÷70Transmission 67÷68 Pneumatic tools 78÷83 Safety footwear 84÷90Workwear 91÷95

Ac_Neutro_Exp_1_8.indd 1 20/11/15 14:16

2

Three-module tool trolley• 3 detachable modules: 1 upper tool box, 220 mm high 1 central tool module, 180 mm high 1 lower tool module with castors, 330 mm high.• Can be used with 2 modules.

C42H 042000002

C41H 041000002

Two-module tool trolley• Sheet metal frame and plastic top, synonymous with remarkable sturdiness and reduced weight.• 2 detachable modules: 1 upper tool box, 1 module with 2 drawers 95 mm in height, 1 pull-out case made of plastic, 66 mm high, and 1 drawer 295 mm in height.• Oversized castors (160 mm), built into frame for easy transport - for example, on steps.• Side centralized lock for closing drawers of lower module.• Drawers with ball bearing slides and double closing hook.• Telescopic aluminium handle.• Small tool holder built into upper tool box.• Lower drawer with double ball bearing slides

21

• Sheet metal frame and plastic top,

sturdiness and reduced weight.• 2 detachable modules: 1 upper sturdiness and reduced weight.• 2 detachable modules: 1 upper sturdiness and reduced weight.

tool box, 1 module with 2 drawers• 2 detachable modules: 1 upper tool box, 1 module with 2 drawers• 2 detachable modules: 1 upper

95 mm in height, 1 pull-out case

and 1 drawer 295 mm in height.

transport - for example, on steps.• Side centralized lock for closing transport - for example, on steps.• Side centralized lock for closing transport - for example, on steps.

slides and double closing hook.

21

14

730 m

m

345 mm

545 mm

Telescopic handle, can be adjusted in 3

positions.

Upper tool box with interior object compartment and 3 tool trays built into cover.

Quick module release system: easy, quick access

to all tool compartments.

Oversized castors (ø 160 mm).

825 m

m

335 mm

536 mm

Sheet metal frames and plastic tops

Ac_Neutro_Exp_1_8.indd 2 20/11/15 14:17

3

Can be transported on a vehicle

ContainersC27SC27S

027000201

5927VU/M 059270021

20

Folding tool trolley for outdoor jobs, empty• Folding tool trolley, with folding columns for effortless transport.• 2 drawers, 588x277 mm, with ball bearing slides, for two-way opening.• Large lower object compartment, 588x277x220 mm.• Sheet metal frame.• 2 fixed castors, Ø 160 mm, and 2 steering castors, Ø 100 mm with brake.• Thermoplastic worktop with 6 built-in tool trays.• Centralized lock.• Can accommodate drawer partitions and MC foam tool trays

Can be transported

bearing slides, for two-way opening.

n°

2 70 mm 20 kg

570

995

mm

395 mm

765 mm

MC10 MC20

Assortment of 108 tools in soft foam tray for trolley C27S

new item

Ac_Neutro_Exp_1_8.indd 3 20/11/15 14:17

4

C39

C39/7

C39/6

C39/8

C39T

C39C39 039000003

039000033

039000043

039000103

039000002

039000032

039000042

039000102

039000001

039000031

039000041

039000101

Roller cab with 7 drawers • 7 drawers (588x367 mm) with ball bearing slides• Front centralized safety lock.• Thermoplastic worktop.• 4 castors 125 mm in Ø: 2 fixed and 2 steering (1 with brake).

61

2 fixed and 2 steering (1 with brake).

61

1200

kgAlluminium alloy

structure:+resistance

+LIGHT

Castors with metal cores for enhanced

sturdiness

n°

5 70 mm 30 kg1 140 mm 35 kg1 210 mm 35 kg

971

mm

500 mm

800 mm

Mobile roller cab with 6 drawers

Mobile roller cab with 8 drawers

59

n°

4 70 mm 30 kg1 140 mm 35 kg1 280 mm 40 kg

971

mm

500 mm

800 mm

n°

6 70 mm 30 kg2 140 mm 35 kg

971

mm

500 mm

800 mm64

29

(588x367 mm) with ball bearing slides

Portable tool chestwith 4 drawers

n°

4 70 mm 30 kg

340

mm

500 mm

800 mm

Ac_Neutro_Exp_1_8.indd 4 20/11/15 14:18

5

Special mobile roller cab, Racing SM type

Special mobile roller cab, Racing MD type

n°

6 70 mm 30 kg1 240 mm 45 kg

n°

6 70 mm 30 kg1 240 mm 45 kg

C39SM 039390003 039390002

125

039390001

C39MD 039390103 039390102

123

039390101

Racing SM

1200kg

Service module• Integrated wastepaper basket• Paper roll compartment• 1 large drawer (420x305x270 mm)

2-drawer module 588x367x270 mm and 588x367x380 mm, with ball bearing slides• Drawer bases protected by foamed rubber mats• Front centralized lock• Opening system throughout length of drawers• Drawer front made of aluminium

n°

Racing MD 1200

kg

Specifications• Multi-ply wood worktop• 4 castors, Ø 125 mm 2 fixed and 2 steering (one with brake), with exposed covering

7-drawer module 588x367 mm, with ball bearing slides: 6 drawers, 70 mm high

1 drawer, 240 mm high• Drawer bases protected by foamed rubber mats

• Front centralized safety lock• Opening system throughout length of drawer

• Drawer front made of aluminium

980

mm

500 mm

1500 mm

980

mm

500 mm

1500 mm

Ac_Neutro_Exp_1_8.indd 5 20/11/15 14:18

6

C24S C24S/7

C24S/6

C24S/8

C23ST

024002073

024002063

024002083

023000523

024002072

024002062

024002082

023000522

024002071

024002061

024002081

023000521

C24S/7

C24S/6

C24S/8

C23ST C23ST 023000523 023000522

Mobile roller cab with 7 drawers • 7 drawers (588x367 mm) with ball bearing slides.• Drawer bases protected by foamed rubber mats.• 4 castors 125 mm in Ø: 2 fixed and 2 steering (one with brake).• Front centralized safety lock.• Thermoplastic worktop designed to match tool chests C22S, C23S, C23SC and C23ST• Integrated side bottle holder.• Paper roll holder item 2400S-R/PC can also be included.

58

• Drawer bases protected by foamed

800kg

Castors with metal cores for enhanced

sturdiness

n°

5 70 mm 25 kg1 140 mm 30 kg1 210 mm 30 kg

955

mm

445 mm

740 mm

55n°

4 70 mm 25 kg1 140 mm 30 kg1 280 mm 35 kg

955

mm

445 mm

740 mm

61n°

6 70 mm 25 kg2 140 mm 30 kg

955

mm

445 mm

740 mm

36

Portable tool chest with 5 drawers• 5 drawers (588x367 mm) with ball bearing slides• Front centralized safety lock.• Can be fitted with kit composed of 4 castors and 1 handle (2300ST/KIT)

n°

5 70 mm 25 kg

454

mm

445 mm

740 mm

454

mm

454

mm

454

mm

Mobile roller cab with 6 drawers

Mobile roller cab with 8 drawers

Ac_Neutro_Exp_1_8.indd 6 20/11/15 14:18

7

C24SA

C24SA/7

C24SA/6

C24SA/8

024002173

024002163

024002183

024002172

024002162

024002182

C24SA/6

C24SA/8

Mobile roller cab with 7 drawers, with anti-tilt system • Seven drawers (588x367 mm) with ball bearing slides:5 drawers, 70 mm high1 drawer, 140 mm high1 drawer, 210 mm high• Drawer bases protected by foamed rubber mats.• Does not allow simultaneous opening of several drawers• Four castors 125 mm in Ø: 2 fixed and 2 steering (one with brake)• Front centralized safety lock• Integrated side bottle holder

Anti-tilt system:

prevents several drawers from being

simultaneously opened

58

55

61

Castors with metal cores for enhanced

sturdiness

n°

5 70 mm 25 kg1 140 mm 30 kg1 210 mm 30 kg

955

mm

445 mm

740 mm

n°

4 70 mm 25 kg1 140 mm 30 kg1 280 mm 35 kg

955m

m

445 mm

740 mm

024002171

024002161

024002181

Mobile roller cab with 6 drawers, with anti-tilt system

Mobile roller cab with 8 drawers, with anti-tilt system

n°

6 70 mm 25 kg2 140 mm 30 kg

955

mm

445 mm

740 mm

anti-tilt 800kg

new item

new item

Ac_Neutro_Exp_1_8.indd 7 20/11/15 14:19

8

Can accommodate up to 6 thermoformed trays in one drawer

C24SA-XL/7 024002273 024002272 024002271

84

80

Mobile roller cab with 7 drawers, with anti-tilt system, long model• 7 drawers (882x367 mm), with ball bearing slides.• Sturdy ABS worktop, with 6 tool trays. • Sturdy nylon front, with integrated label holder.• Drawer bases protected by foamed rubber mats.• 4 castors 125 mm in Ø: 2 fixed and 2 steering (one with brake).• Front centralized safety lock.• Integrated side bottle holder.

Mobile roller cab with 7 drawers, with anti-tilt system, long model

2 fixed and 2 steering (one with brake).

1000

kg

882 mm

970 m

m

445 mm

1035 mm

970 m

m

445 mm

1035 mm

970 m

m

565 mm

1050 mm

Mobile roller cab with 8 drawers, with anti-tilt system,long model

n°

5 70 mm 30 kg1 140 mm 35 kg1 210 mm 35 kg

n°

6 70 mm 30 kg2 140 mm 35 kg

C24SA-XL/8 024002283 024002282 024002281

C24SL 024002103 024002102 024002101

Mobile roller cab with 7 drawersand side tops• 7 drawers (588x367 mm) with ball bearing slides.• 4 castors 125 mm in Ø: 2 fixed and 2 steering (two with brakes).• Front centralized safety lock.• Multi-ply wood worktop with holes for a vice (1599F/100, to be ordered separately).• Side compartment with vertically adjustable top.• Integrated paper roll holder.• Double rear bottle holder.

n°

5 70 mm 25 kg1 140 mm 30 kg1 210 mm 30 kg

Castors with metal

cores for enhanced

sturdiness

C24SA-XL/7C24SA-XL/7C24SA-XL/7

C24SA-XL/8C24SA-XL/8C24SA-XL/8

88

970 m

m

565 mm

1050 mm

• 7 drawers (588x367 mm) with ball bearing slides.

• Side compartment with vertically adjustable top.

n°5 70 mm1 140 mm1 210 mm

1100

kg

Castors with metal cores

for enhanced sturdiness

new item

Ac_Neutro_Exp_1_8.indd 8 20/11/15 14:19

9

C28 028000303 028000302 028000301

SuperTank trolley with worktop and 10 drawers• 10 drawers (588x367 mm) with ball bearing slides.• Quick, safe system for opening and closing drawers, with nylon and fibreglass front.• 5 side drawers.• 5 front drawers.• Drawer bases protected by foamed rubber mats.• 4 high-capacity castors 150 mm in Ø: 2 fixed and 2 steering (with brakes).• 2 centralised safety locks.• Multiply wood worktop with holes for a vice (1599F/150, to be ordered separately)• Side compartment with foldaway door with lock.• 135-mm-high storage compartment with plastic-covered base.

• Quick, safe system for opening and closing

• Multiply wood worktop with holes for a vice

1200

kg

n°

8 70 mm 25 kg2 210 mm 30 kg

945 m

m

800 mm

1235 mm

130

C59A 059000041 059000021 059000001

115

“Endurance” workbench with 1 cab with six drawers

1500

kg

n°

4 70 mm 25 kg1 140 mm 30 kg1 280 mm 35 kg

930 m

m

700 mm

2000 mm

• Worktop made from multi-ply wood with holes for vice item 1599F/125 (to be ordered separately).• 6 drawers (588x367 mm) with ball bearing slides: 4 drawers, 70 mm high1 drawer, 140 mm high1 drawer, 280 mm high.• Drawers protected by foamed rubber mats.• Hard-wearing nylon drawer front.• Roller cabs can accommodate thermoformed trays.• Front centralized safety lock.• Lower object shelf.• Can be fitted with paper roll holder (2400S-R/PC) and bottle holder (2400S/PF), to be ordered separately.

Ac_Neutro_Exp_9_16.indd 9 20/11/15 15:25

10

C56W

C56

C51

056000253

056000203

051000003

056000252

056000202

051000002

056000251

056000201

051000001

Workbench with wood top• Multi-ply wood worktop (40 mm thick)• Steel frame with 6 supporting legs• Matches panel tool holder C57P; cannot be fixed to worktop.• Two drawers with locks.• Can be fixed to floor.

930 m

m

720 mm

2000 mm

1200

kg

1200

kg

930 m

m

640 mm

2000 mm

Trolley• 3 tops covered in antislip ribbed rubber.• Two fixing options for central worktop.• Four castors Ø 100 mm: 2 fixed and 2 steering (1 with brake).• Static load capacity: 200 kg (distributed between 3 shelves).

21

82

85

900 m

m

450 mm

800 mm

200kg

new item

Workbench• Worktop made of painted sheet metal with external edge.• Steel frame with 6 supporting legs.• Two drawers with lock.• Can be fixed to floor.

Ac_Neutro_Exp_9_16.indd 10 20/11/15 15:25

11

C20L 021200002

2080/V12 020800000

CP15 021150201

CP15L 021150202

Five-section cantilever tool box, made from sheet metal, empty

Organizer tool case with 12 removable tote-trays, emptyRemovable, folding clear tote-trays,for immediate recognition of contentsCan be hooked to belt loops

550x200x210 mm

2080/V122080/V12

Organizer tool case with 12 removable tote-trays, emptyRemovable, folding clear tote-trays,for immediate recognition of contentsCan be hooked to belt loops

300x330x145 mm

• 1 tool tray built into cover• 2 removable tool trays with adjustable partitions• 1 interior tote-tray with adjustable partitions• Carrying capacity: 30 kg

Tool box, made from plastic, removable tote-tray and tool trays, empty

445x240x250 mm

558x277x270 mm

new item

• 3 tool trays built into cover with adjustable partitions• 1 interior tote-tray with adjustable partitions• Carrying capacity: 30 kg

Tool box, long series, made from plastic, removable tote-tray and tool trays, empty

Ac_Neutro_Exp_9_16.indd 11 20/11/15 15:25

12

C4 021040000

C5 021050000

C6T 021060010

360x330x260x mm

500x400x180 mm

480x370x220 mm

Tool basket made of technical fabric, empty• Removable internal tool panel• Internal and external pockets and elastic tool holder• Sturdy waterproof base with rubber feet• Supplied with shoulder strap

Tool rucksack, made of technical fabric, with castors, empty• Telescopic handle for easy transport• Built-in castors with dustproof cover for use as rucksack• 2 removable tool panels• 5 functional exterior pockets • One capacious interior PC pocket

Tool rucksack, made of technical fabric, empty• Removable interior tool panel• 6 functional exterior pockets • 2 capacious interior pockets • Waterproof plastic base• Double safety lace for fixing rucksack to shoulders• Ergonomic padded back

Ac_Neutro_Exp_9_16.indd 12 20/11/15 15:25

13

C7 021070000

C8 021080000

C10S 021100001

440x370x170 mm

Technical fabric tool bag, empty• 2 removable interior tool panels• Interior PC pocket• 2 exterior front pockets• Interior bottom made of plastic, with removable partitions

440x370x170 mm

470x370x280 mm

Technical fabric tool trolley, empty• Telescopic carrying handle• 2 removable interior tool panels• 2 exterior front pockets• Can accommodate tool box item C10S

Technical fabric tool box, empty• Hard frame• Double bottom. Bottom can be removed for increased bag capacity• Tilting handle for easier access to tools• Elastic tool bands and interior and exterior pockets• Cover • Tool tray included in double bottom

470x370x280 mm

420x220x250 mm

C8

C10S

Ac_Neutro_Exp_9_16.indd 13 20/11/15 15:26

14

C10 021100000

C11 021110000

C12 021120000

Technical fabric tool box, empty• Hard frame• Double bottom. Bottom can be removed for increased bag capacity• Tilting handle for easier access to tools• Elastic tool bands and interior and exterior pockets• Cover • Tool tray included in double bottom

520x220x250 mm 520x220x250 mm

400x240x220 mm

Technical fabric tool box• Hard water resistant plastic base• Elastic bands and interior and exterior tool pockets• Document holders built into double bottom of cover

400x240x220 mm

Technical fabric tool bag, empty • Removable interior tool panel• Elastic tool bands and capacious interior and exterior pockets• Hard, waterproof base with rubber feet• Can be used with trolley C8

Bag opens at front for easier access

to tools at workplaceBag opens at front for easier access

500x370x270 mm

Ac_Neutro_Exp_9_16.indd 14 20/11/15 15:26

15

Assortments

5988VA/T

5988VI/T

5988U/TP

XL 059880411

XL 059880421

XL 059880441

L 059880410

L 059880420

L 059880440

5988U/TP 5988U/TP

T199 T202 T80 T145 T153 T131 T234

T52 T33 T15 T16 T63 VP5

Assortment of 107 tools in thermoformed trays

Assortment of 108 tools in thermoformed trays

T199 T202 T80 T145 T153 T131 T234

T52 T33 T15 T16 T236 T289 VP4VP4

T83 T145 T153 T55T132 T234 T52T10 T220T33

Assortment of 90 tools in thermoformed trays

Ac_Neutro_Exp_9_16.indd 15 20/11/15 15:27

16

5988U/MP

5988 U6/MPXL 059880431

XL 059880429 L 059880428

L 059880430

L

M15 M33 M199 M202

M10 M30 M210

M230 M130 M100

M50 M83 M132 M153 M234 M145

Assortment of 91 tools in soft thermoformed tray

Assortment of 214 tools in soft thermoformed tray

M10 024500010

M30 024500030

42 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm

55 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 21x23-24x27-30x32 mm90 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 21x23-24x27-30x32 mm96BPC/SC9 1,5-2-2,5-3-4-5-6-8-10 mm

Soft Module Systems

5988U/MP 5988U/MP

5988 U6/MP 5988 U6/MP 5988 U6/MP

new item

new item

Ac_Neutro_Exp_9_16.indd 16 20/11/15 15:28

17

M63 024500063

M60 024500060

M100 024500100

M120 024500120

M121 024500121

M130 024500130

M210 024500210

M230 024500230

952 7-8-10-12-13-14-17-19 mm

895/1 - 895/3 - 895/6 900 4-4,5-5-5,5-6-7-8-9-10- 11-12-13-14 mm 900L 5-6-7-8-9-10-11-12-13 mm 900ME 3-4-5-6-7 mm 900LP 0,8x4-1x5,5-1,2x6,5-1,2x8 mm 900PH PH1-PH2-PH3-PH4 900TX T10-T15-T20-T25-T27-T30-T40900/20 50 mm - 900/20L 100 mm900/21 150 mm900/25 - 900BG/30 - 900/42 900/55

920A 10-11-12-13-14-15-16-17-18- 19-20-21-22-24-26-27-30-32 mm920AN/125 125 mm920AN/250 250 mm920/25 - 920/42 920AL 10-12-13-14-15-16-17-18-19- 22-24-27-30-32 mm

920BP 5L-6L-8L-10L-5XL- 6XL-8XL mm 920TX T20-T25-T27-T30-T40- T45L-T50L-T55L-T60L-T70L 920XZN 4-5-6-6L-8-8L-10-10L-12-

1032 180 mm 1034 170 mm 1036 175 mm 1038 175 mm1048 250 mm1052 240 mm 1082BM 160 mm

1201 2,5x50-3x75-4x100- 5,5x125-6,5x150-8x200 mm 1201N 4x30 mm 1202 PH0x60-PH1x80-PH2x100- PH3x150 mm

30 Ø 2-3-4 mm31 Ø 2-3-4-5-6-8 mm32 Ø 4 mm34 150 mm35 200-250 mm36 125 mm1370 500 g1390 Ø 35 mm1692 3 m

920A 8-10-11-12-13-14-15-16-17- 18-19-20-21-22-23-24-26-27- 28-30-32 mm920/15 - 920/25 920AN/125 125 mm920AN/250 250 mm920/42 920/55 920FTX 10-12-14-16-18-20-22-24 mm 920AL 10-12-13-14-15-16-17-18- 19-21-22 mm

920FTX 10-12-14-16-18-20-22-24 mm 920/55 920PE 5-5L-6-6L-7-7L-8-8L-10-10L- 12-12L-14-14L 920TX T20-T25-T27-T30-T40-T45- T50-T55-T60-T20L-T25L-T27L- T30L-T40L-T45L-T50L

12L-14-14L-16-18 mm 920ES 7-9-10-11-12L-14L-16L- 7XL-9XL-10XL-11XL- 12XL-14XL-16XL mm920/36A

1098 220 mm1112 250 mm1128BM 1150BM 180 mm1166BM 160 mm1168BM 160 mm

1202N PH1X30 mm 1207TX T6-T7-T8-T9-T10-T15-T20- T25-T27-T30-T40-T45 1253

1712 1719BMA/Q 200 mm 1719BMA/T 200 mm 1719BMA/P 200 mm 1719BMA/M 200 mm 1719BMA/R 200 mm1737 1771 18 mm

Thermoformed trays

96T 2-2,5-3-4-5-6-7-8-10 mm 97BTX/SC8 T9-T10-T15-T20-T25-T27-T30-T40 944BX 5-6-7-8-10-13 mm

new item

Ac_Neutro_Exp_17_24.indd 17 01/12/15 12:05

18

T10 024240010

42 6-7-8-10-11-12-13-1416-17-18-19-21-22-24-27-30 mm

T15

T40

T91

T45 T46

T16 T31

T50

T85

024240015

024240040

024240091

024240045 024240046

024240016 024240031

024240050

024240085

42 6-7-8-9-10-11-12-13-1415-16-17-18-19-20-21 mm

42 22-24-27-30-32 mm

31 Ø 2-3-4-5-6 mm32 Ø 4 mm55 6x7-8x9-10x11 12x13-14x15 16x17-18x19 20x22-21x23 24x26-27x29 30x32 mm 96N/SC9 1,5÷10 mm

90 6x7-8x9-10x11-12x1314x15-16x17-18x19 mm

142 8-9-10-11-12-13-1415-16-17-18-19 mm

142SN 8-9-10-11-12-13-14 15-16-17-18-19 mm

96T 2-2,5-3-3,5-4-4,5-5-6-7-8-10 mm

T55 024240055

97TTX T10-T15-T20 T25-T27-T30

T63 024240063

952 7-8-10-12-13-14-17-19 mm

T83 024240083

920A 10-11-1213-14-15-16-17-1819-20-21-22-23-2426-27-30-32 mm920/21 125 mm920/22 255 mm920/25920/42 305 mm 920/55 275 mm

861LP 0,5x3-0,6x4,5-0,8x5,5-1x5,5-1,2x6,5-1,2x8-1,6x8 mm 861PE 2-2,5-3-4-5-6-8-10 mm 861PH PH0- PH1 - PH2 - PH3 861PZ PZ1 - PZ2 - PZ3 861TX T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40 861RTX T9-T10-T15-T20-T25-T27-T30-T40 861TRW 1-2-3-4-5-6 mm 861TQS 0-1-2-3-4-5-6-8 mm 861SP 4-6-8-10-12 mm851SR 230 mm 900 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm900/21 150 mm 900/25 41 mm900BG/30 176 mm 900/42 115 mm 900/55 125 mm 194 1/4x5/16

900 4-4,5-5-5,5-6-7-8-9 10-11-12-13-14 mm 900ME 2,5-3-4-5-6-8 mm 900/20 50 mm 900/21 150 mm 900/25 900BG/30 176 mm 900/42 115 mm 900/55 125 mm

Ac_Neutro_Exp_17_24.indd 18 20/11/15 15:30

19

T92

T153 T202 T205T199

T131 T145T103 024240092

024240153 024240202 024240205 024240199

024240131 024240145 024240103

31 Ø 2-3-4-5-6 mm32 Ø 4 mm55 6x7-8x9-10x11 12x13-14x15 16x17-18x19 20x22-21x23 24x26-27x29 30x32 mm 96N/SC9 1,5÷10 mm

910A 6-7-8-9-10-11-12 13-14-15-16-17-18 19-20-21-22 mm910/21 125 mm 910/22 250 mm 910/25 910/42 210 mm 910/55 200 mm

900L 6-7-8-9-10-11-12 mm 920AL 13-14-16-17-18-19 21-22-24-27 mm

1084BM 160 mm1150BM 180 mm1166BM 160 mm

1032 180 mm 1034 170 mm 1036 175 mm 1038 175 mm

1048 250 mm1052 240 mm

1260 2,5x50 - 3x753,5x100 - 4x125 - 5,5x1005,5x150-6,5x150 mm

1262 PH0x60PH0x100 - PH1x80PH1x120 - PH2x100 PH2x150 mm

1267TX T6-T7-T8-T9T10-T15-T20

T210 024240210

1201 2,5x50-3x753,5x100-4x1255,5x100-5,5x1506,5x150 mm

T234 024240234

T212 024240212

1202 PH0x60-PH1x80PH1x120-PH2x100PH2x150-PH3x150 mm

T236 024240236

T215 024240215

1207TX T6-T7-T8-T9T10-T15-T20

T239 024240239

31BM ø 2-3-4-5 6-8 mm32 ø 4 mm

35 100-200 mm1370 300 g1390 ø 35 mm

1719BMA/Q 200 mm 1719BMA/T 200 mm 1719BMA/P 200 mm 1719BMA/M 200 mm 1719BMA/R 200 mm

Ac_Neutro_Exp_17_24.indd 19 20/11/15 15:31

20

42/SP15 000420078

55/SP7 000550167

42/SC9I 000420087

90/S7 000900163

Set of 15 combination wrenches with holder 6-7-8-9-10-11-12-13-14-15 16-17-19-22-24 mm

Set of 7 double open end wrenches with holder 6x7-8x9-10x11-12x13-14x15 16x17-18x19 mm

Set of 9 combination wrenches, open and offset ring ends,with compact support 8-10-11-12-13-14-15-17-19 mm

6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm

Set of 7 double ended deep offset ring wrenchese 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm

Set of 7 double ended deep

Ac_Neutro_Exp_17_24.indd 20 20/11/15 15:31

21

142/SC9I 001420087

142SN/SC9 001420259

192/S2 001920070

142C/A12 001420175

Wrenches

8-10-11-12-13-14-15-17-19 mm

Set of 9 reversible ratcheting combination wrenches,with compact support

8-10-11-12-13-14-15-17-19 mm

Set of 9 swivel end ratcheting combination wrenches with compact support

Set of 2 reversible ratcheting offset bi-hex ring wrenches

Set of 12 ratcheting combination wrenches, straight short seriesin case

13 mm 10 mm

12 mm 8 mm19 mm 17 mm

18 mm 16 mm

8 misure in 2 chiavi

8-9-10-11-12-13-14-15 -16-17-18-19 mm

Ac_Neutro_Exp_17_24.indd 21 20/11/15 15:31

22

Adjustable wrenches with scales, chrome-plated• Movable jaw opening with right-hand rotation of pin• Head angled at 22.5 degrees, with mm and inch scale

Set of deep, hi-torque hexagon nut spinners long series

A

111/200 001110020

L 200 mm A max 28 mm

111/150 001110015

L 150 mm A max 24 mm

944BX/D6 009440056

952/D7 009520079

111/250 001110025

L 250 mm A max 34 mm

111/300 001110030

L 300 mm A max 35 mm

mm/inchreadout

5-6-7-8-10-13 mm

Set of 7 T-handle wrenches with swivelling hexagon sockets 7-8-10-12-13-14-17 mm

Set of deep, hi-torque hexagon

90°

45°

Ac_Neutro_Exp_17_24.indd 22 20/11/15 15:31

23

96T/S5P 000960946

951/S6 009510687

97TTX/S6 000970795

96/BGS7 000960367

Male-end wrenches

Set of 5 offset hexagon key wrenches with handles

2,5-3-4-5-6 mm

Set of 6 T-handle wrenches with three hexagon male ends 2,5-3-4-5-6-8 mm

Set of 6 ball head offset key wrenches for Torx® head screws,with handles

Set of 7 offset hexagon key wrenches

T10-T15-T20-T25-T30-T40

Set of 6 ball head offset key wrenches

1,5-2-2,5-3-4-5-6 mm

Ac_Neutro_Exp_17_24.indd 23 20/11/15 15:31

24

wrench locking system

96BPC/SC9 000960354

96LBP/SC9 000961354

96/SC9 000960374

97BTX/SC8 000970164

locking systemlocking system

Set of 9 ball head offset hexagon key wrenches

1,5-2-2,5-3-4-5-6-8-10 mm

Set of 9 ball head offset hexagon key wrenches

Set of 9 offset hexagon key wrenches

1,5-2-2,5-3-4-5-6-8-10 mm

1,5-2-2,5-3-4-5-6-8-10 mm

+30%

Extra-long model

Set of 8 ball head offset key wrenches, for Torx® head screws

T9-T10-T15-T20-T25-T27-T30-T40

Ac_Neutro_Exp_17_24.indd 24 20/11/15 15:32

25

Bit fits both sides, for screwing or unscrewing

860MIX/A10 008600900

860/58K 008609884

860/C27 008600880

Set of 10 bits with magnetic bit holder in plastic case

Bit ratchet with rotating handle

0,5x3 - 1,0x5,5 - 1,2x6,5 mm PH1 - PH2 (x2) - PH3 PZ1 - PZ2 - PZ3 1/4” - 1/4”

860LP 860PH

882M1 860PZ

Rotating the handle clockwise and anticlockwise will make

the bit turn quickly

Set of 25 bits,1 connector and 1 reversible ratchetin plastic caseand 1 reversible ratchet

860PE 2-2,5-3-4-5-6-mm

860PZ PZ1 - PZ2(2x) - PZ3

860LP 0,5x3-1,0x5,5-1,2x6,5 mm

860TX T6-T8-T10-T15-T20-T25-T30-T40 860PH PH1-PH2(x2)-PH3

860/55 100 mm892/0

862F/A7 008620950

Set of 7 magnetic bits, hexagon sockets,in plastic case

hexagon sockets,in plastic case

862F 5,5-6-7-8-1012-13 mm

Bits

new item

Ac_Neutro_Exp_25_32.indd 25 20/11/15 15:44

26

new item

1/4” drive reversible ratchet with rotating handle

• Socket release button• Ring nut reversal system on ratchet head

• Bi-material handle

900/58 009000884

910/58 009100884

920/58 009200926

900/C39-R 009000938

Lmm

Ømm

Amm

900/58 126 28 28,5910/58 222 37 38,5920/58 281 42,5 45

Amm

ø mm

Assortment of 11 hexagon sockets, 21 bits and 7 accessories• Reversible ratchet with rotating handle

Operating systemwith rotating handle

Rotating the handle clockwise and

anticlockwise will make the bit turn quickly

new itemnew item900/C39-R900/C39-R900/C39-R

009000938

new item900/C39-R900/C39-R hexagon sockets,

and 7 accessories

hexagon sockets,

Operating systemwith rotating handle

861LP 0,6x4,5-1,2x6,5-1,2x8 mm861PE 2,5-3-4-5-6 mm861PH 1-2-3861PZ 1-2-3

861RTX 10-15-20-25-27-30-40 mm892/0895/1 900 5-5,5-6-7-8-9-10-11-12-13-14 mm

900/20 50 mm900/20L 100 mm900/25

900BG/30C900/58

150x95x50 mm

Ac_Neutro_Exp_25_32.indd 26 20/11/15 15:45

27

Sockets

900/C12MR 009000962

910A/C16HR 009100935

920A/C17MR 009200937

900/C12MR900/C12MR 009000962

900/C12MR900/C12MR900/C12MR

910A/C16HR910A/C16HR910A/C16HR910A/C16HR 009100935

910A/C16HR910A/C16HR

920A/C17MR920A/C17MR920A/C17MR 009200937

920A/C17MR920A/C17MR

Assortment of 12 hexagon sockets, 20 bits and 7 accessories in foam tray, in metal case

861LP 0,5-0,8-1-1,2 mm861PE 3-4-5-6-8 mm861PH PH0-PH1-PH2-PH3861TX T8-T10-T15-T20-T25-T30-T40895/1900 4-5-5,5-6-7-8-9-10-11-12-13-14 mm

900/20 50 mm900/21 150 mm900/25900/42

900BG/30900/58 350x150x50 mm

Assortment of 16 hexagon sockets and 5 accessories in foam tray, in metal case

910A 6-7-8-9-10-11-12-13-1415-16-17-18-19-21-22 mm

910/21 125 mm910/22 250 mm910/25910/42910/58

335x145x60 mm

Assortment of 17 hexagon sockets and 5 accessories in foam tray, in metal case

420x185x60 mm

920A 10-11-12-13-14-15-16-17-18-1920-21-22-24-27-30-32 mm

920/21 125 mm920/22 255 mm920/25920/42920/58

Operating systemwith rotating handle

Rev

ersi

ble

ratc

het

with

ro

tatin

g ha

ndle

Ac_Neutro_Exp_25_32.indd 27 20/11/15 15:46

28

900/C39 009000937

900/C12M 009000963

910A/C16 009100936

861LP 0,6x4,5-1,2x6,5-1,2x8 mm861PE 2,5-3-4-5-6 mm861PH 1-2-3861PZ 1-2-3

861RTX 10-15-20-25-27-30-40 mm892/0895/1 900 5-5,5-6-7-8-9-10-11-12-13-14 mm

900/20 50 mm900/20L 100 mm900/25

900BG/30C900/55

150x95x50 mm

Assortment of 11 hexagon sockets, 21 bits and 7 accessories in plastic case

900/C12M900/C12M900/C12M 009000963

900/C12M900/C12M

900/C39900/C39 009000937

900/C39900/C39900/C39 009000937

910A/C16910A/C16910A/C16 009100936

910A/C16910A/C16

861LP 0,5-0,8-1-1,2 mm861PE 3-4-5-6-8 mm861PH PH0-PH1-PH2-PH3861TX T8-T10-T15-T20-T25-T30-T40895/1900 4-5-5,5-6-7-8-9-10-11-12-13-14 mm

900/20 50 mm900/21 150 mm900/25900/42

900BG/30900/55

Assortment of 12 hexagon sockets, 20 bits and 7 accessories in foam tray, in metal case

350x150x50 mm

Assortment of 16 hexagon sockets and 5 accessories in metal case

335x145x60 mm

910A 6-7-8-9-10-11-12-13-1415-16-17-18-19-21-22 mm

910/21 125 mm910/22 250 mm910/25910/42910/55

Ac_Neutro_Exp_25_32.indd 28 20/11/15 15:46

29

920A/C17M 009200924

902A/C22 009020807

928A/C12 009280955

920A/C17M920A/C17M920A/C17M 009200924

920A/C17M920A/C17M

902A/C22902A/C22902A/C22 009020807

902A/C22902A/C22

Assortment of 17 hexagon sockets and 5 accessories in foam tray, in metal case

920A 10-11-12-13-14-15-16-17-18-1920-21-22-24-27-30-32 mm

920/21 125 mm920/22 255 mm920/25920/42920/55 420x185x60 mm

Assortment of 22 hexagon sockets and 6 accessories in metal case

900 5-5,5-6-7-8-9-10-11-12-13 mm900/20 50 mm900/25900/55

920A 10-13-14-15-17-18-19-22-2427-30-32 mm

920/21 125 mm920/25920/55

Assortment of 22 hexagon sockets

420x185x60 mm

Assortment of 12 hexagon hand sockets and 5 accessories in metal case

928A/C12928A/C12

928A 22-24-27-30-32-34-36-38-4146-50-55 mm

928/21 200 mm928/22 380 mm928/25928/42928/55

Assortment of 12 hexagon

530x220x80 mm

Ac_Neutro_Exp_25_32.indd 29 20/11/15 15:46

30

Click-type torque wrenches with reversible ratchets

for right-hand tightening torque accuracy: ±4% torque accuracy: ±4%

606/6 006060105

8÷60 Nm L= 305 mm

UNI EN 26789 ISO 6789

606/10X

006060111

20÷100 Nm L= 345 mm

606/20 006060120

40÷200 Nm L= 440 mm

606/30 006060130

60÷330 Nm L= 560 mm

Click-type torque wrencheswith push-through ratchets,

for right-hand and left-hand tightening,torque accuracy: ±4%

667N/20 006670020

40÷200 Nm L= 470 mm

667N/30 006670030

60÷300 Nm L= 598 mm

667N/40 006670040

80÷400 Nm L= 711 mm

UNI EN 26789 ISO 6789

• scale increased by 60% for improved visibility and setting accuracy• torque adjusting speed increased by 40%• handle and lens materials resistant to all chemical substances used in automotive sector, industry and aviation• red colour of o-ring indicates that wrench is unlocked and torque can be adjusted• when not in use, set torque to lowest value of torque wrench range• recalibration reminder shows time to recalibrate wrench (4 steps: 3, 6, 9 and 12 months)

new item

Ac_Neutro_Exp_25_32.indd 30 01/12/15 12:07

31

electronic direct reading torque wrench, for right-hand and left-hand tightening,torque accuracy: ± 2%/± 3%

601C 006010100

560/C12 005600210

560/C6005600160

Click-type torque wrencheswith push-through ratchets,

for right-hand and left-hand tightening,torque accuracy: ±4%

• For tightening screws to values set by measuring torsion angle• Complete with buzzer and LED indicators informing user that preset angle has almost or finally been reached• For right-hand and left-hand tightening• Angle accuracy: +/-2%• Resolution: 0.1°• Up to 9 angle values can be preset• Up to 50 measurements can be preset• Supplied in an ABS case• Power supply: 2 AAA-size batteries (included)

Torque wrenches

electronic direct reading torque wrench, for right-hand and left-hand tightening,torque accuracy: ± 2%/± 3%

Torque wrenches

Nm Kgfm lbf.ft L mm g 599DGT/6 12÷60 1,2÷6 8÷44 3/8" 413 800 005990003599DGT/10X 20÷100 2÷10 15÷80 1/2" 413 910 005990010599DGT/20 40÷200 4÷20 30÷150 1/2" 520 1500 005990020599DGT/30 68÷340 6,8÷34 58÷280 1/2" 639 2350 005990030

599DGT/6

599DGT/10X

599DGT/30

599DGT/20

informing user that preset angle has almost

Digital torque angle indicator

Torque multipliers for right-hand and left-hand tightening in plastic case

ratio 12:1

Torque multipliers for right-hand and left-hand tightening in plastic case

ratio: 6.5:1

400x260x110 mmNm Kgfm lbf.ft

2500 250 1844 1/2” 1”Nm Kgfm lbf.ft

1500 150 1106 1/2” 3/4”

complete with straight reaction lever and reaction foot

complete with straight reaction lever

and reaction foot

Torque multipliers for right-hand and left-hand tightening

ratio 12:1

400x260x110 mmNm Kgfm

2500 250

3/4”

complete with straight reaction complete with straight

• Reversible ratchet• LCD display• Unit of measurement: Nm, ft.lb, in.lb, kgcm• Dual approaching/stopping signal• Power supply: 2 AA 1.5V batteries (included)

6 7

new item

Ac_Neutro_Exp_25_32.indd 31 20/11/15 15:47

32

1169BM/D3 011690123

Pliers

Set of 1 combination pliers, 1 long needle nose pliers and 1 diagonal cutting nippers

Pliers1082BM 160 mm

1166BM 160 mm

1150BM 180 mm

L 340 mm

1057A 010570124

Automatic self-locking pliers with adjustable force

38 mm

45°1009L/DP-S2 010090060

Set of 2 extra-long, knurled double swivel nose pliers • Suitable for jobs in hard-to-access areas

Ac_Neutro_Exp_25_32.indd 32 01/12/15 12:09

33

1047/180 010470180

1048 010480015

1047/240 010470240

1047/300 010470300

Slip joint pliers, push button alignment

• Quick, accurate adjustment by pressing push button • No accidental misadjustment

• Heat-treated jawsLmm

ø Max mm

Max mm

180 30 29240 36 35300 50 48

1047/2401047/2401047/2401047/2401047/2401047/2401047/2401047/2401047/2401047/240 1047/3001047/3001047/3001047/3001047/3001047/3001047/3001047/3001047/3001047/3001047/300

• Quick, accurate adjustment by pressing push button• No accidental misadjustment

• Quick, accurate adjustment by pressing push button• No accidental misadjustment

• Quick, accurate adjustment by pressing push button

• Heat-treated jaws• No accidental misadjustment

• Heat-treated jaws• No accidental misadjustment

Slip joint pliers, boxed joints• slip-proof double layer PVC coated handles

9-position model9-position model

1031/S4 010310000

Set of 4 circlip pliers

1034 170 mm 19 ÷ 60 mm1034 170 mm 19 ÷ 60 mm

1032 180 mm 19 ÷ 60 mm

1036 175 mm 19 ÷ 60 mm

1038 175 mm 19 ÷ 60 mm

L 250 mm

new item

Ac_Neutro_Exp_33_40.indd 33 23/11/15 14:23

34

Screwdrivers

1203/D8P 012030018

Set of 8 screwdrivers1201 2,5x50-3x75-4x100-5,5x100-6,5x150 mm1202 PH0x60-PH1x80-PH2x100 mm

1203/D10N 012030019

Set of 10 screwdrivers1201 2,5x50-3x75-4x100-5,5x150-6,5x150 mm1202 PH0x60-PH1x80-PH2x100 mm

1202N PH1x30 mm 1201N 4x30 mm

1207TX/D7 012070207

Set of 7 screwdrivers1207TX T6-T8-T10-T15-T20-T25-T30

1263/D10 012630010

1267TX/D7 012670307

Set of 10 screwdrivers1260 3x75-3,5x100-4x125-5,5x150-6,5x150 mm1262 PH0x60- PH1x80-PH2x100 mm1260N 4x30 mm1262N PH1x30 mm

Set of 7 screwdrivers1267TX T6-T8-T10-T15-T20-T25-T30

1202N PH1x30 mm

1293/D8 012930403

1243/D7 012430017

Set of 8 screwdrivers

Set of 7 screwdrivers

1201 3x75-4x100-5,5x100 6,5x150-8x150 mm1202 PH0x60-PH1x80-PH2x100 mm

1241 5,5x100-6,5x125-8x150-10x200 mm1242 PH1x100-PH2x100-PH3x150 mm

1263/D8 012630008

Set of 8 screwdrivers1260 2,5x50-3x75-4x100-5,5x125-6,5x150 mm1262 PH0x60-PH1x80-PH2x100 mm

Ac_Neutro_Exp_33_40.indd 34 23/11/15 14:24

35

1370

1392

31BM/D6 000310420

38/B6 000380006

Hammers and chisels

Ø 2-3-4-5-6-8 mm

Set of 6 pin punches with handles

Set of 6 drift punches, centre punches, flat chisels and cape chisels, in wallet

Engineer’s hammer, wooden shaft

Dead-blow hammers, with interchangeable plastic faces, steel shafts

30: Ø 2-3 mm

32: Ø 4 mm

34: 125-150 mm

36: 150 mm

g €1370/200 200 013700052 € 9,80

1370/500 500 013700055 € 13,801370/800 800 013700058 € 18,001370/1000 1000 013700060 € 21,001370/1500 1500 013700065 € 24,50

13701370137013701370Engineer’s hammer, wooden shaft

Ø mm €1392/30 30 013920030 € 36,001392/35 35 013920035 € 38,001392/40 40 013920040 € 43,001392/50 50 013920050 € 52,001392/60 60 013920060 € 79,00

13921392139213921392Dead-blow hammers, with interchangeable plastic faces, steel shafts

1207TX T6-T8-T10-T15-T20-T25-T30

Set of 7 screwdrivers1267TX T6-T8-T10-T15-T20-T25-T30

1390Soft face hammers, wooden shafts

Ø mm €1390/22 22 013900022 € 13,401390/28 28 013900028 € 17,001390/35 35 013900035 € 22,701390/45 45 013900045 € 37,001390/60 60 013900060 € 63,00

Ac_Neutro_Exp_33_40.indd 35 23/11/15 14:24

1370/300 300 013700053 € 11,30

36

1128BAX 011280088

1130BMX 011300001

1719BMA8/S5 017190070

Double-acting electricians’ scissors, with milling profiles in DLC-coated stainless steel

Multiuse scissors,straight blades made in stainless steel,with microteeth

Set of 5 second cut filesplastic handles

1719BMA8/S51719BMA8/S5

made in stainless steel,

Set of 5 second cut files

Q T

P M

R

Profile and mill: designed to enlarge holes on plastic,

from 13 mm to 24 mm.• High blade surface hardness

(resistance to abrasion and wear)• Low coefficient of friction

(smoothness and anti-adherence)• Anti-loose eccentric pin

• With articulated plastic case

Large handles with pipe throttling grooves

+ hardness- coefficient of

friction

Patented

DLC coating:DLC (diamond-like carbon) is an innovative carbon-based coating: the high hardness and low coefficient of friction arise from the simultaneous presence of carbon on the surface in the form of graphite, and diamond.

3

2

Spring mechanism200

mm

Large handles with pipe throttling grooves

simultaneous presence of carbon on the surface in the form of graphite, and diamond.

new item

new item

Double-acting cutting

- effort + powera special cam on the fulcrum reduces of 20% shear stress

Double-acting electricians’ scissors, with milling profiles in DLC-coated stainless steel

+ hardness 3

2

a special cam on the fulcrum reduces of 20% shear stress

Ac_Neutro_Exp_33_40.indd 36 23/11/15 14:24

37

anodized aluminium handle

anodized aluminium handle

1778SCL 17780089

1778SOS 017780080

1777T 017770030

1771 017710000

1770BM 017700050

Foldaway knife with soft carbon look finishhardened steel bladein case

Cutting tools

Foldaway knife with soft carbon look finishhardened steel blade

anodized aluminium handle

Car service knife with window breaking hammerand seat belt cutter featuresin case

Foldaway knife with trapezoidal stainless steel blade, 5 spare blades

Utility knife, 18 mm,supplied with 3 blades

Utility knife with automatic blade locking mechanism, 6 blades

anodized aluminium handle

Foldaway knife with trapezoidal

new item

Ac_Neutro_Exp_33_40.indd 37 23/11/15 14:24

38

Drilling and threading tools

412/SP19P 004120429

446/C110 004460060

415CO/SP19A 004150440

425P/SP3 004250610

412/SP19P412/SP19P412/SP19P412/SP19P412/SP19P 004120429

115x170x40 mm

100x145x40 mm

Set of 19 twist drills with cylindrical shanks, HSS, entirely ground glossy finishing

Set of 7 machine taps for clearance holes,coarse pitch threads,HSS-CO

ø 1÷10 x 0,5 mm

M 3x0,5 - 4x0,7 - 5x0,8 - 6x1 - 8x1,25 10x1,5 - 12x1,75

R≤1000N/m2 HV 820÷850

415CO/SP19A415CO/SP19A415CO/SP19A415CO/SP19A415CO/SP19A 004150440

115x170x40 mm

100x145x40 mm

Set of 19 twist drills with cylindrical shanks, HSS-CO 5%• For drilling holes into STAINLESS steel, alloy steel, cast iron, mild steel, light alloys

Set of 3 stepped drills,HSS-G, extremely effective sharpening

Ø 1÷10 x 0,5 mm

100x145x40 mm

Set of 3 stepped drills,HSS-G, extremely effective sharpening

Ø 4÷12; 4÷20; 4÷30 mm

IIII

430 M mm

433 M mm

440/440AM mm

441/441A M mm

2x0,4 6x0,75 - 7x0,75 2x0,4 6x0,75 - 7x0,753x0,5 8x0,75 -8x1 3x0,5 8x0,75 -8x14x0,7 9x0,75 - 9x1 4x0,7 9x0,75 - 9x15x0,8 10x0,75 -10x1 5x0,8 10x0,75 -10x16x1 10x1,25 - 11x0,75 6x1 10x1,25 - 11x0,757x1 11x1 - 11x1,25 7x1 11x1 - 11x1,25

8x1,25 12x0,75 - 12x1 8x1,25 12x0,75 - 12x19x1,25 12x1,25 - 12x1,5 9x1,25 12x1,25 - 12x1,510x1,5 14x1 - 14x1,25 10x1,5 14x1 - 14x1,2511x1,5 14x1,5 - 16x1 11x1,5 14x1,5 - 16x1

12x1,75 16x1,5 - 18x1,5 12x1,75 16x1,5 - 18x1,514x2 14x216x2 16x2

Assortment of chrome-steel taps and dies, metric thread, and accessories for car repair jobs in wooden case

500x337x60 mm

435/0435/3

444/1444/2

436/1

Assortment of chrome-steel taps and dies, metric thread, and accessories for car repair jobs

500x337x60 mm

435/0435/0435/3

444/1444/1444/2

436/1

• with white ring• increased surface hardness and wear resistance, reduced chip sticking

100x145x40 mm

Set of 7 machine taps

coarse pitch threads,

M 3x0,5 - 4x0,7 - 5x0,8 - 6x1 - 8x1,25

429/C7 004290207

new itemnew item

Ac_Neutro_Exp_33_40.indd 38 23/11/15 14:24

39

1651DGT 016510111

1696B200 016960202

1695XS 016950250

1696B300 016960203

1696B400 016960204

1651LDGT 016510112

Measuring toolsMax 150 mm

Max 200 mm

Digital vernier made from hardened stainless steel

in hard plastic case• Reading to 0.01 mm• Screw slider locking• Mm/inch conversion

A Max mm L mm

150 225

A Max mm L mm

200 285

in hard plastic case• Reading to 0.01 mm

in hard plastic case• Reading to 0.01 mm

in hard plastic case• Screw slider locking• Reading to 0.01 mm• Screw slider locking• Reading to 0.01 mm

• Mm/inch conversion• Screw slider locking• Mm/inch conversion• Screw slider locking

mm 0,01” 0,0005

A

L

UNI EN ISO 13385-1DIN 862

Measuring tapes shock-resistant bimaterial ABS casings, steel tapes, precision class II

Spirit levels with magnetic bases made from anodized profiled aluminium, 2 unbreakable vials accuracy: 1 mm/m

Pocket spirit level with magnetic V-shaped base made from profiled aluminium2 unbreakable vialsaccuracy: 1mm/m• Complete with clip

S

L

H

S

L m S mm €1692/2 2 16 016920052 € 5,701692/3 3 16 016920053 € 7,201692/5 5 18 016920055 € 10,401692/8 8 25 016920058 € 15,00

1692

2 unbreakable vials

70 mm

48,5

mm

70 mm

Ideal for pipes and round sections

in general

L 200 mm H 49 mm S 22 mm L 300 mm H 49 mm S 22 mm L 400 mm H 49 mm S 22 mmnew item

Ac_Neutro_Exp_33_40.indd 39 01/12/15 12:11

40

1500

1501

1517

Two-leg universal pullers

Thin leg pullers

Three-leg self-locking pullers• Simultaneous leg opening.• Self-locking effect• Double nut• Patent pending.

Carico Kg

Amin ÷ Max

mm €

1500/1 4500 25÷ 80 mm 17 015000301 € 62,001500/2 4500 25÷ 130 mm 17 015000302 € 65,001500/3 6000 50÷ 160 mm 22 015000303 € 105,001500/4 6000 60÷ 200 mm 22 015000304 € 148,00

A

A

L

A

Carico Kg

Amin ÷ Max

L mm

mm €

1501/1 3500 25÷ 130 mm 100 17 015010101 € 145,001501/2 3500 25÷ 130 mm 200 17 015010102 € 155,001501/3 3500 25÷ 130 mm 250 17 015010103 € 160,00

Carico Kg

Amin ÷ Max

mm

mm

€

1517/90 6000 18÷90 mm 22 19 015170000 € 185,001517/150 6000 25÷150 mm 22 19 015170010 € 198,001517/200 6000 40÷200 mm 22 19 015170020 € 227,001517/260 8000 50÷ 260 mm 30 27 015170030 € 255,00

2,00 mm

Ac_Neutro_Exp_33_40.indd 40 23/11/15 14:25

41

1428/SB11 014280111

1545/C5M 015450011

1547/C6 015470006

Pullers

Set of pullers for damaged nuts quare drive with support

Pullers

15-16-17-18-19 mm 8-10-11-12-13-14 mm

Puller 1542/1 with 5 extractors 1544with 5 extractors 1544

24 mm

35÷75 mm

1544/1 9÷12 0,801544/2 13÷17 1,151544/3 16÷21 1,701544/4 20÷25 1,651544/5 25÷30 2,00

A mm

C mm

A

C

265x180x45 mm

Dummy ball bearing extractors• quick, safe extraction

420x185x60 mmBearings1547/1 6011-6014, 6206-6211, 6303-6308, 6403-6405 11547/2 6004-6010, 6200-6205, 6300-6304

Ac_Neutro_Exp_41_48.indd 41 20/11/15 16:08

42

334 003340001

342 003420030

351C 003510010

Pipe cutter for copper and light alloy pipes ø 3÷30 mm

1/8”÷1”1/8ø 3÷30 mm1/8”÷1”1/8

Ratchet-type shears for plastic pipes

ø 0÷42 mm1”5/8ø 0÷42 mm1”5/8

Pipe cutter and tube flaring toolin plastic case

334 ø 3÷30 mm 1/8”÷1”1/8

350 ø 4÷14 mm

351P ø 4-4,75-6-8-10-12-14 mm

180x117x44 mm

Ac_Neutro_Exp_41_48.indd 42 20/11/15 16:08

43

388C/C8 003880200

378/320 003780032

360/350 003600035

360/450 003600045

360/600 003600060

378/410 003780041

378/550 003780055

Plumbing tools

ø 3÷30 mm1/8”÷1”1/8

ø 0÷42 mm1”5/8

Pipe bender with 7 forms, made of aluminium,for soft copper and light alloy pipes in plastic case

Pipe wrenches, Swedish pattern, 45° slim jaws

400x330x110 mm

Ø mm 10,12,14,16,18,20,22

L= 320 mmø max 1” gas ø max 34 mm

L= 410 mmø max 1” 1/2 gas ø max 49 mm

L= 550 mmø max 2” gas ø max 60 mm

L= 350 mmø max 1” 1/2 gas ø max 49 mm

L= 450 mmø max 2” gas ø max 60 mm

L= 600 mmø max 2” 1/2 gasø max 76 mm

Pipe wrenches, Stillson pattern

Ac_Neutro_Exp_41_48.indd 43 20/11/15 16:08

44

10÷120 mm2

1149F 011490010

1609B 016090101

1606A/C9 016060100

1256/C36-2 012560100

front wire stripping pliers with cutting blade, self-adjusting

0,2÷6 mm2

28÷17 AWG

Mechanical crimping pliers• For noninsulated copper terminals, 10÷120 mm²• Antislip rubber handle• Internal “H” section pin for unparalleled punch smoothness• Made from burnished steel

Crimping pliers for tubular terminals 1606A with assortment of 450 terminals

10÷120 mm2

• Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch • Internal “H” section pin for unparalleled punch smoothness• Internal “H” section pin for unparalleled punch smoothness• Internal “H” section pin for unparalleled punch smoothness smoothness smoothness smoothness smoothness smoothness smoothness smoothness smoothness smoothness• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel• Made from burnished steel

L 600 mm

with cutting blade, self-adjusting 0,2÷6 mm2

28÷17 AWG

420x350x35 mm

Bi-material microscrewdriver with 36 interchangeable 4-mm bits and magnetic extension

1256TX T3-T4-T5-T6-T7-T8-T9-T10-T151256RTX T6-T7-T8-T9-T101256LP 0,8-1,2-1,5-1,8-2-2,5-3-3,5-4 mm1256PE 0,7-0,9-1,3-1,5-2 mm1256PH PH000-PH00-PH0-PH11256PZ PZ000-PZ00-PZ0-PZ11256/201256/30

T3-T4-T5-T6-T7-T8-T9-T10-T15

0,8-1,2-1,5-1,8-2-2,5-3-3,5-4 mm

130x60x35 mmFor precision

jobs

Ac_Neutro_Exp_41_48.indd 44 20/11/15 16:08

45

1257LPH/S8 012570210

1760/OHM 017600025

1760/RMS 017600020

Electrotechnics

Set of 8 micro-screwdriversfor slotted head screws and Phillips® screws in hard case 1257LP:0.4x2; 0.4x2.5; 0.5x3; 0.6x3.5; 0.8x4mm 1257PH:PH00; PH0; PH1

180x117x44 mm 1257LP:0.4x2; 0.4x2.5; 0.5x3; 0.6x3.5; 0.8x4mm 180x117x44 mm

Multimeter/megohmmeter for high voltage insulation testing. TRUE RMS indicator

Measuring range Base accuracyAC/DC voltage: 50mV - 1000V ±0.06% - ±0.1% rdgAC/DC current: 0.01μA - 10A ±0.5% - ±1% rdgResistance: 0.01Ω - 50MΩ ±0.2% - ±2% rdgMeg OHM: 0.01 - 5000MΩ ±4% rdg. max current 1mACapacity: 5nF - 10mF ±1.5% - ±3% rdgFrequency: 50Hz - 100 MHz ±0.02% - ±0.1% rdgTemperature: -50 °C - +1350 °C ±0.5% rdgDiode test: 3V dc Continuity test: <30 Ω

Shockproof: tested for falls up to 2 metres

• Water protection IP67

• Protection up to 1000V

• Tested for accidental falls up to 2 m

• Protected inlets • Autoranging

• Large direct reading display, backlit, blue

• K type temperature probe (included) • Self-power down

• Rubber terminal base for enhanced operating comfort

• Double insulated terminals, 1000V, 1 m long

• Supplied in a soft case • CAT IV 600V/ CAT III 1000V

• Actual effective value TRUE RMS

Multimeter/megohmmeter for high voltage

±0.06% - ±0.1% rdg

±4% rdg. max current 1mA

±0.02% - ±0.1% rdg

• Supplied in a soft case • CAT IV 600V/ CAT III 1000V

• Actual effective value TRUE RMS

Industrial digital multimeteraccurate and sturdy, in a 6-mm co-moulded shell, with antislip, shockproof outer rubber part

Measuring range Base accuracy AC/DC voltage 110mV – 600V ±0.8% - ±2% rdgAC/DC current 110μA – 10A ±1.5% - ±2% rdgResistance 110Ω – 40MΩ ±1.2% - ±2.5% rdgCapacity 11nF – 40mF ±5% - ±10% rdg (up to 11mF)Frequency 1100Hz – 110 MHz ±1.2% - ±1.5% rdgTemperature -32°C – +1000°C ±3% - ±5% rdgDiode test 3V DC ±10% rdgContinuity test <30 Ω

Suitable for hybrid and electric vehicles

Ac_Neutro_Exp_41_48.indd 45 01/12/15 12:14

46

2115P L-MQ32 021150332

1273MQ/D6 012730851

Assortment of 32 insulated tools for hybrid cars,in plastic tool box with soft thermoformed tray

89MQ 10-12 mm850MQ 1/4”

860TX/A10 T7-T8-T9-T10-T15-T20 T25-T27-T30-T40

920MQ/55A 1/2”920MQ/A 8-10-12-13-14-17-19 mm920MQ/21 1/2” 125 mm920MQ/22 1/2” 250 mm

1048MQ250 250 mm1150MQ 180 mm

1164MQ160 160 mm1272MQ 4.5X80-6X100 mm1274MQ 3X100-4X100-5.5X125

1995MQ/G2CP15L

558x277x270 mm

1169MQ/D2 011690143

Assortment of insulated combination pliers and insulated diagonal cutting nippers, bright chrome-plated finish

1082MQ 160 mm

1150MQ 180 mm

Set of 6 screwdrivers Set of 6 screwdrivers

1272MQ PH0x60-PH1x80-PH2x100 mm

1274MQ 3x100-4x100-5,5x125 mm

Suitable for hybrid and electric vehicles

new item

Ac_Neutro_Exp_41_48.indd 46 20/11/15 16:09

47

C04TSS/7 024003077

42INOX/SC9 000420387

1293INOX/D8 012930408

Mobile roller cab with seven drawers,made entirely of stainless steel• Seven drawers (570 x 410 mm) with ball bearing slides; 6 drawers, 83 mm high;1 drawer, 170 mm high;• 4 castors Ø 125 mm2 fixed and 2 steering (two with brakes);• Front centralized lock;• Frame made entirely of stainless steel• Castors, supports, ball bearings, drawer interiors and guides made of stainless steel• Drawer handles made of aluminium

570

410

83 mm 25 kg170 mm 30 kg

Set of 9 combination wrenches made of stainless steelwith compact support

Set of 9 combination wrenches

8-10-11-12-13-14-15-17-19 mm

Set of 8 screwdrivers made of stainless steel

1290INOX 2,5x50-3x75-4x1005,5x150-6,5x150 mm5,5x150-6,5x150 mm

1292INOX PH0x60-PH1x80PH2x100 mm

700kg

Beta stainless steel tools can be

sterilized in autoclave at 121° C

935 m

m

470 mm

680 mm

new item

Ac_Neutro_Exp_41_48.indd 47 20/11/15 16:09

48

+

-

1749AC 017490005

2,4÷4,8 mm steel

1740B280 017400280

1740B330 017400330

3,2÷6,4 mm steel

Compact heavy-duty riveting pliers• Optimized lever ratio for increased

compactness and handiness.• 3 jaws lock rivet for a perfect grip.• Adjustable head for pulling rivet

by 2 to 5 leg movements.

Compact heavy-duty riveting pliers• Optimized lever ratio for increased

Compact heavy-duty riveting pliers• Optimized lever ratio for increased

Compact heavy-duty riveting plierscompactness and handiness.

• Optimized lever ratio for increased compactness and handiness.

• Optimized lever ratio for increased

• 3 jaws lock rivet for a perfect grip.compactness and handiness.

• 3 jaws lock rivet for a perfect grip.compactness and handiness.

• Adjustable head for pulling rivet • 3 jaws lock rivet for a perfect grip.• Adjustable head for pulling rivet

• 3 jaws lock rivet for a perfect grip.

by 2 to 5 leg movements.• Adjustable head for pulling rivet

by 2 to 5 leg movements.• Adjustable head for pulling rivet

With stem tank

200 m

m

3 jaws: improved rivet

grip

3 jaws: improved rivet

grip

3 jaws: 3 jaws:

1741U 017410450

Ultra compact riveting plierswith adjustable force

200 m

m

230 mm

Ø 50 mmSTANDARDHigh thrust gun for chemical binders

1750 500 017500500

Lever operated grease guns, 500cc 550 Bar

2,4÷4,0 mm steel

Ac_Neutro_Exp_41_48.indd 48 20/11/15 16:09

49

OFF → ON

1500 ml

General maintenance

tools

1870 018700020

Solid and fluid vacuum cleaner, 20 l

49

Solid and fluid vacuum

IPX4

IPX4

STANDARD ACCESSORIES, Ø 36 mm• 1 corrugated hose with ergonomic handle• 2 hard extension tubes• 1 multiuse brush for floors and fluids• 1 flat nozzle

FILTERING SYSTEMS• 1 surface air filter cartridge 1900 cm2 - 12 μm nom.• 1 anti-foam filter PPI 45/PPI 30

TECHNICAL SPECIFICATIONS• single-stage by-pass motor• voltage: 230/240 V• frequency: 50/60 Hz• max. power: 1200 W• airflow rate: 58 l/sec.• max. suction pressure: 190 mbar• max. drum capacity: 20 l, made of antistatic PP• acoustic emissions: <70 dB(A)• cable length: 5 m• trolley for accessories

1756D 017560515

Suction gun, 1500 ml,made of polypropylene• Double NBR gasket• Operating temperature: +0 - +50 °C• NOT suitable for fuel

1873 018730030

Solid and fluid vacuum cleaner, 30 l, stainless steel drumTECHNICAL SPECIFICATIONS• two-stage by-pass motor• voltage: 230/240 V• frequency: 50/60 Hz• max. power: 1100 W• airflow rate: 55 l/sec.• max. suction pressure: 220 mbar• max. drum capacity: 30 l, made of stainless steel• acoustic emissions: <61 dB(A)• cable length: 6 m• trolley for accessories:

Solid and fluid vacuum cleaner, 30 l, stainless steel drumTECHNICAL SPECIFICATIONS• two-stage by-pass motor

30 l, made of stainless steel• acoustic emissions: <61 dB(A)

tools

IPX4

018730030

Solid and fluid vacuum cleaner,

Solid and fluid vacuum cleaner,

STANDARD ACCESSORIES• 1 corrugated hose with ergonomic handle• 2 hard extension tubes• 1 industrial brush frame• 1 industrial section for carpets• 1 industrial section with fluid collection hoses• 1 flat nozzle• 1 triangular nozzle

FILTERING SYSTEMS• 1 filter paper bag• 1 surface filter cartridge 1900 cm2, 12 μm nom.• 1 anti-foam filter PPI 45/PPI 30

• blowing function• non-marking wheels

OFF → → ON

1500 ml

1756D1756D1756D1756D1756D1756D 017560515

Suction gun, 1500 ml,made of polypropylene• Double NBR gasketmade of polypropylene• Double NBR gasketmade of polypropylene• Operating temperature: • Double NBR gasket• Operating temperature: • Double NBR gasket

• NOT suitable for fuel

Ac_Neutro_Exp_49_56.indd 49 01/12/15 12:16

50

7042LCD 070420001

• Viewing area: 98x43 mm• Darkening shade: DIN 9-13, externally adjustable• UV/IR protection• Light to dark time: 1/25000 s• Dark to light time: 0.25-1s• Adjustable darkening sensitivity and delay• Auto on/off• Grinding feature• Optimized shape to make it easier to breathe with pulled-down screen

Auto-darkening LCD mask, for electrode welding; MIG/MAG; TIG and plasma.Solar cells power supply and lithium batteries for outstanding LCD filter life

to breathe with pulled-down screen

DC hand electrode inverter welding machinesUltracompact and easy to carry, complete with cables, hammer brush and shoulder strap. Arc force, hotstart, anti-sticking and thermostatic protection features

1860E/120A 1860E/150A 1860K/160AAdjustment current 5÷120A 5÷150A 5÷155APower supply 1x230V 1x230V 1x230VAbsorbed power MAX 2.5 KVA MAX3,3 KVA MAX 3,7 KVA

Use factor35% - 120 A60% - 70 A

100% - 55 A

35% - 150 A60% - 120 A

100% - 100 A

35% - 150 A60% - 130 A

100% - 100 ADelayed fuse 12 A 16 A 20 AProtection IP21 IP23 IP21Use with generators ✗ ✗ ✔

Operating temperature -15/+40° C (+5/+104° F) -15/+40° C (+5/+104° F) -15/+40° C (+5/+104° F)

Usable electrodes Ø 1.5 - 3.25 mmrutilic, basic, stainless steel, cast iron, etc.

Ø 1.5 - 4 mmrutilic, basic, stainless steel, cast iron, etc. Ø 1.5 - 4mm

1860K/160A 018600160

200

mm

330 mm

130 mm

1860E/120A 018600120

200

mm

270 mm

120 mm

1860E/150A 018600150

200

mm

330 mm

130 mm

Ac_Neutro_Exp_49_56.indd 50 20/11/15 16:11

51

1837N 018370002

1836 018360100

Magnetic, articulated lamp with high-brightness LEDs,up to 400 lumen

High-brightness LED torch,made of sturdy, anodized

aluminium

1xAA 2xAA 3xAA

IPX6

IPX6

1834P S 018340310

2xAANot included2xAA

AA

1xAAA 2xAAA 3xAAA

1834P M 018340320

1xAAA2xAAA3xAAA

Not included

1xAAAAAA

1834P XL 018340330

3xDNot included3xD

D

1xAA 2xAA 3xAA

1834P L 018340325

3xAANot included3xAA

AA

Articulated LED headlamp, dual brightness, with sensor

Adjustable focus90 lumens

• Batteries (not included) : - 1xAA (life 20/60 h) - 2xAA (life 28/84 h)w - 3xAA (life 36/108 h)• Lumens: 400>40>OFF• Charge indicator• Adjustable focus• IPX6

300

350

1350

550

new item new item

Ac_Neutro_Exp_49_56.indd 51 20/11/15 16:11

52

Abundant ready lighting

Compact: no more than 85x100x155 mm in size

1838 FLASH 018380300

PATENTED

Rechargeable, ultracompact spotlight, designed to offer the best possible solution for each use• IP65 - without external power supply• Dual brightness: 650 / 300 lumens• Lithium polymer battery 7.4 V 4000 mAh

Can be placed anywhere:on flat surfaces: with rubber feet in three sides or 1/4” drive for standsdrive for stands

• IP65 - without external power supply• Dual brightness: 650 / 300 lumens• IP65 - without external power supply• Dual brightness: 650 / 300 lumens• IP65 - without external power supply

Can be placed anywhere:on flat surfaces: with rubberfeet in three sides or 1/4” drive for stands

• IP65 - without external power supply• Dual brightness: 650 / 300 lumens• IP65 - without external power supply• Dual brightness: 650 / 300 lumens• IP65 - without external power supply

Can be placed anywhere:on flat surfaces: with rubberfeet in three sides or 1/4” drive for stands

90°

1/4”

360°360°360°360°360°

650300

12V 5 m

230V

UV-395nm

UV

COB LED

150 lumen/UV LED150 lumen/UV LED

3h/3h3h/3h

3,7V/1600mAh Li-on3,7V/1600mAh Li-on

Charger input: 100-240Vac50/60Hz

Charger input: 100-240Vac

3h

IP 20

-10° to +40°C

90°90°90°90°650300

1838UV/S2 018380850

Kit for detecting leaks in systems Contents:- Rechargeable UV and white light lamp, with charger- Anti-UV, high-contrast glasses, with case

UV-395nm

UV

COB LEDCOB LED

150 lumen/UV LED150 lumen/UV LED

3h/3h3h/3h

3,7V/1600mAh Li-on3,7V/1600mAh Li-on

Charger input: 100-240Vac50/60Hz

Charger input: 100-240Vac

3h

IP 20

new item

Ac_Neutro_Exp_49_56.indd 52 20/11/15 16:13

53

UV-395nm

UV

COB LED

150 lumen/UV LED

3h/3h

3,7V/1600mAh Li-on

Charger input: 100-240Vac50/60Hz

3h

IP 20

-10° to +40°C

1838/11LED 018380111

Rechargeable inspection lamp with ultra-high brightness LEDs,lithium polymer battery• Compact body made of antislip rubber• With charging station, 110-230Vac • With multidirectional head LED

• With 230/24 V safety transformer• Max. 25 W

1846LED/BM 018460301

Automatic cable reel withLED inspection lamp, 100-240 Vac

1846LED/ABM 018460311

Automatic cable reel with LED inspection lamp, 12-24 V; AC-DC• Max. 60 W

53

Automatic cable reel withLED inspection lamp, 100-240 Vac

1842LED/BM 018420301

1842LED/ABM 018420311

• Compact body made of antislip rubber• Easy-to-replace front glass• Swinging hook• With multi-directional head LED light

• Compact body made of antislip rubber• Easy-to-replace front glass

• Swinging hook• With multi-directional head LED light

Lamp with ultra-high brightness LEDs, 100-240 Vac

Lamp with ultra-high brightness LEDs, 12-24 V; AC-DC

10-m-long cable

Swinging hook

now with head LED

even more compact and brighter

Easy-to-replace front glass

Rechargeable inspection lamp with ultra-high brightness LEDs,

• Compact body made of antislip rubber• With charging station, 110-230Vac • Compact body made of antislip rubber• With charging station, 110-230Vac • Compact body made of antislip rubber

• With multidirectional head LED• With charging station, 110-230Vac • With multidirectional head LED• With charging station, 110-230Vac

now with head LED

even more compact

320 Lumen

320 Lumen

<20%

new item

new ite

m

new item

Ac_Neutro_Exp_49_56.indd 53 20/11/15 16:14

54

• Ideal for low leakage values 1mA-80A

• High-brightness LED

1760PA/80 017600002

1760PA/AC-DC 017600000

1497/C94 014970300

1497RC 014970351

AC/DC amperometric clamp, 80ASpecifically designed to measure low current leakage or absorption values on vehicles

• Range: 1mA-80A AC/DC• Torch function with white LED• Backlit LCD display • Zero setting function• Hold function• Auto power off • Power supply: 2 1.5V AAA-type batteries 2 1.5V AAA-type batteries

Amperometric clamp and digital multimeter• Allows DC and AC measurements up to 1000 A• Integrated multimeter function A: AC/DC V: AC/DC

SPECIFICATIONSDC voltage: 0.1mV ÷ 600VAC voltage: 0.1mV ÷ 600VAC current: 0.01A ÷ 1000ADC current:: 0.01A ÷ 1000AResistance: 0.1Ω ÷ 40MΩCapacity: 0.001nF ÷ 40 µFFrequency: 0.001kHz ÷ 4kHzTemperature: -40°C ÷ 1000 °C -40°F ÷ 1832°FPower supply: 1 9V battery (not included)

Assortment of 94 car testing connectors. For use with main diagnostic tools

1497/C941497/C941497/C941497/C941497/C94 014970300

Assortment of 94 car testing connectors. For use with main diagnostic toolsASSORTMENT CONTENTS:• 2 t-taps• 2 potentiometers• 2 warning lights • 2 SRS connectors• 2 alligator clips• 2 acicular probes• 2 prods• 2 dual banana connectors• 4 single banana connectors• 24 flat male terminals 0.6÷6 mm• 12 round male terminals 1.6÷3.9 mm• 24 flat female terminals 0.6÷6 mm• 12 round female terminals 1.6÷3.9 mm

1760PA/AC-DC1760PA/AC-DC

T-taps, pair• pick up signal without damaging cables• cable section: 1.5÷3.5 mm• voltage: 0÷330V• max. current: 5A

430x390x100 mm

new item

Ac_Neutro_Exp_49_56.indd 54 20/11/15 16:14

55

SPECIFICATIONSDC voltage: 0.1mV ÷ 600VAC voltage: 0.1mV ÷ 600VAC current: 0.01A ÷ 1000ADC current:: 0.01A ÷ 1000AResistance: 0.1Ω ÷ 40MΩCapacity: 0.001nF ÷ 40 µFFrequency: 0.001kHz ÷ 4kHzTemperature: -40°C ÷ 1000 °C -40°F ÷ 1832°FPower supply: 1 9V battery (not included)

T-taps, pair• pick up signal without damaging cables• cable section: 1.5÷3.5 mm• voltage: 0÷330V• max. current: 5A

Automotive

961D 009610500

961P6 009610000

Digital electronic videoscope with 5.5 mm probeAllows individual still images and video clips to be recorded and played back directly on tool

Micro USB Micro HDMIMicro-SD card input

Microphone

TECHNICAL DATAOptimal viewing distance: 2,5-30 cmPower supply: 3,7V - 4200 mAhEstimated battery life: 2,5-4 oreWeight: 520gSensor resolution: 640x480 pixels (digital)Viewing width: 60 degreesVideo and photo resolution: 640x480Dimensions: 184x144x27 mm

961D/CF3,8 009610511

1-m probe with 3.8-mm front camera

961D/DC8,5 009610513

1-m probe with dual UV camera

45° mirror and magnet ✔ ✘

Internal memory 32MB 32MBTV-OUT feature ✔ ✔Sensor pixels 640x480 640x480Maximum resolution 320x240 320x240Probe length 1 m 1 mCamera diameter 6 mm 4,5 mmVideo formats MPEG4, 3GP, AVI,ASF. MPEG4, 3GP, AVI,ASF.Photo formats JPEG JPEGShooting angle 0÷180° 0÷180°Power supply 3,7V 2000 mAh 3,7V 2000 mAh

961P6 961P4

961P4 L (m) 961P6 Ø mm €

961P6/S2 ✔ ✔ 2 6 009610262 € 265,00

961P6/S3 ✔ ✔ 3 6 009610263 € 310,00

Electronic videoscope with flexible probeAllows videos or individual images

to be directly recorded on instrument• Supports SD cards (8 GB)

• Supports flash memories (8 GB)• 4 LEDs

• Power supplied by USB port (built-in battery)

• Protective shell• TFT LCD display, 7”• Probe Ø 5.5 mm, with front and side camera, 4 LEDs• Photo and video function

961P4 009610004

mm, with front and side camera, mm, with front and side camera,

• Photo and video function

Probe Ø 5.5 mm,

with front

and side camera,

4 LEDs

new item

new item new item

Ac_Neutro_Exp_49_56.indd 55 20/11/15 16:14

56

1464T 014640050 With kit 960AD/TP2,

it makes it possible to test the following:• petrol and diesel engine compression• engine oil pressure• common rail low pressure• petrol injection pressure

With kit 1464AP, it makes it possible to test the following:• actual common rail circuit pressure• high pressure pump pressure

SPECIFICATIONS• 5” touch screen display• rechargeable polymer lithium battery• complete with 80 bar sensor (for low pressure) and USB cable

Digital pressure and compression tester

960AD/TP2 009600510

1464IC 014640350

Set of adaptors for item 960TPContents:• Dummy injectors • Dummy glow plugs• Spark plug adaptors • Oil cap adaptors• Petrol injection couplers• Set of spare gaskets

Set of dummy injectors and dummy glow plugs for item 1461T

Makes it possible to connect to the engine to check compression in diesel engines with digital tester 1464T.Contents:• 22 dummy glow plugs• 5 dummy injectors• 1 universal dummy injector kit for trucks, marine engines and agricultural machines

Set for testing high pressure system in common rail diesel engines, with item 1464T Complete with:• high pressure pipe set• fittings• 2,000 bar sensor

Petrol injection couplers• Set of spare gaskets

Petrol injection couplersSet of spare gasketsPetrol injection couplers

430x310x50 mm

1464AP 014640450

Makes it possible to connect to the

• 1 universal dummy injector kit for trucks,

high pressure system in common rail diesel engines, with item 1464T• high pressure pipe set

559x312x50 mm

430x310x50 mm

new item

new item

new item

Ac_Neutro_Exp_49_56.indd 56 20/11/15 16:14

57

Automotive

430x310x50 mm

1497/C23 014970200

Assortment of 23 tools for releasing electrical connectors

430x310x50 mm

Electronic car/motorcycle battery charger

• Protected against polarity reversal and short circuits • Digital backlist display

• Pull-back fixing hook

1498/8A 014980108

TECHNICAL DATAPower supply voltage: 220V-240VFrequency: 50-60 HzRated current (min-max): 2-8 AmpBattery voltage: 12VBattery capacity: 5Ah-160AhMemory saving feature: 13,8V - 5ADegree of protection: IP65

• Flat battery recovery function• Power supply function 13.8V-5A

• Pull-back fixing hook • Digital backlist display

• Pull-back fixing hook

• Pull-back fixing hook

1498/4A 014980104

• Automatic 6 V or 12 V selection• Automatic battery type selection

TECHNICAL DATAPower supply voltage: 220V-240VFrequency: 50-60 HzRated current (min-max): 1-4 AmpBattery voltage: 6V/12VBattery capacity: 4Ah-80AhCharging time: 12 hoursDegree of protection: IP65

12 V / 50 A1498/50A 014980050

ECUAlimentatore Power supply

Protocollo diagnosiDiagnosis protocol

Electronic multipurpose battery charger, 12V Particularly suitable for charging and powering vehicleswhile reprogramming and self-diagnosing• Max. charging/power supply current: 50 Amp• charging• battery recovery• power supply for ECU diagnostic protocols• electronic management through microprocessor• protected against polarity reversal and short circuits

12 V / 50 A

• electronic management through microprocessor• protected against polarity reversal and short circuits

TECHNICAL DATAPower supply 230VVoltage 12VCharging current 1-50ACharging capacity 5-500AhMaintenance capacity 5-1500AhCable length 3mSection 10 mm2

380 m

m

100 mm

220 mm

new item

new item

new item

Ac_Neutro_EXP_57_64.indd 57 20/11/15 16:17

58

new item1498/40A

014980140

1498TB/12 014980400

1498ST/TB 014980410

Multipurpose battery charger /starter, 12-24V wheeled• 3 programmed charging cycles and 1 manual cycle• electronic adjusting potentiometer • specific WET-SPIRAL/GEL-AGM charging cycles• electronic control and protection system • 10-stage charging process• battery desulfurization and recovery function• supply function• dual voltage, 12-24V• also suitable for Start&Stop batteries• professional rubber-insulated brass clamps

• specific WET-SPIRAL/GEL-AGM charging cycles

TECHNICAL DATAPower supply: 230VOutput voltage: 12-24VCharging current: 1-40AStarting current: 350A max ccCharging capacity: 4-450Ah

2 in 1battery charger

+ starter

Digital battery tester, 12V• Allows the following to be tested: battery, alternator and starter• Fitted with software for printing test from PC• Backlit display• Compact, shockproof frame• 10 language software• Complete with input for connecting a removable mini printer (optional accessory)

TECHNICAL DATA:• Applications: 12V battery test 12V alternator charge test - Starter test• Operating range: 100-1700 CCA• Reference standards: CCA,SAE,DIN,EN,IEC,JIS• Batteries supported: PB, Wet, Gel, Agm, Mf, Vrla, Sli• Voltmeter: 9V-15V• Cable length: 180 cm• Languages: Italian, English, French, German, Spanish, Polish, Romanian, Dutch, Swedish and Finnish• Accessories included: USB cable and software

Fitted with software for printing test from PC

a removable mini printer (optional accessory)

• Cable length:• Languages: Polish, Romanian, Dutch, Swedish and Finnish• Accessories included:

370x270x100 mm

12V battery test 12V alternator charge test - Starter test

Mini thermal printerfor tester item 1498TB/12• Mini printer can be directly connected to tester• Allows test results to be printed

1498/40A1498/40A

800 m

m

280 mm

300 mm

Ac_Neutro_EXP_57_64.indd 58 20/11/15 16:17

59

lightweight and

compact

1498/12 014980480

1498MN/12 014980000

1498/24 014980490

TECHNICAL DATAPower supply: 230VOutput voltage: 12-24VCharging current: 1-40AStarting current: 350A max ccCharging capacity: 4-450Ah

TECHNICAL DATA:• Applications: 12V battery test 12V alternator charge test - Starter test• Operating range: 100-1700 CCA• Reference standards: CCA,SAE,DIN,EN,IEC,JIS• Batteries supported: PB, Wet, Gel, Agm, Mf, Vrla, Sli• Voltmeter: 9V-15V• Cable length: 180 cm• Languages: Italian, English, French, German, Spanish, Polish, Romanian, Dutch, Swedish and Finnish• Accessories included: USB cable and software

Automotive

12V

12-24V

Portable car starter, 12V• Pickup current: 2200A• Shoulder strap included• Sealed lead acid battery, solid electrolyte (AGM) type

Multipurpose portable starter

FEATURES1) motor vehicle starting with 12-volt battery (diesel and petrol engines up to 2,000 cc)2) charging of tablets, mobile phones and electronic devices in general3) multi-use LED torch

Automotive

12V

Portable car and commercial vehicle starter, 12-24V• Pickup current: 4200A (12V) - 2100A (24V)• Shoulder strap included• Sealed lead acid battery, solid electrolyte (AGM) type

Battery

lightweight and

compact1) motor vehicle starting with 12-volt battery (diesel and petrol engines up to 2,000 cc)1) motor vehicle starting with 12-volt battery (diesel and petrol engines up to 2,000 cc)1) motor vehicle starting with 12-volt battery

2) charging of tablets, mobile phones (diesel and petrol engines up to 2,000 cc)2) charging of tablets, mobile phones (diesel and petrol engines up to 2,000 cc)

and electronic devices in general2) charging of tablets, mobile phones and electronic devices in general2) charging of tablets, mobile phones

3) multi-use LED torch and electronic devices in general3) multi-use LED torch and electronic devices in general

TECHNICAL DATAPickup current: 600ABattery type: LiCoO2Starting output: 12 Volt

240x185x60 mm

• starting cables with insulated clamps and device protecting against polarity reversal and short circuits

• USB cable with charge adapters

• mains and car power supplier

• USB outlet for charging electronic devices

1498/121498/121498/121498/12 014980480

new item

Ac_Neutro_EXP_57_64.indd 59 20/11/15 16:17

60

960KPC 009600780

960KC/M.... 009600801

960EPC 009600790

Reversible impulse extractor with adjustable torque for glow plugs• Pneumatic extractor with adjustable torque and

special sockets allow jammed glow plugs to be unscrewed, thereby minimizing damage risk

• 5 1/4” impact sockets, long series, specially designed for glow plugs: 8-9-10-11-12 mm, 2 extensions and 1 articulated joint

• 4 adjustable driving torques: 10-20-30-40 Nm• Right-hand and left-hand adjustment

Assortment of tools for removing broken or damaged glow plugs

380x290x50 mm

420x185x60 mm

For spark plugs with threads M8-M9-M10

Set of tools for removing glow plug electrode• Allows end part of electrode to be correctly and quickly removed in case of breaks or seizures in glow plug seat.• Suitable for glow plugs with threads M8x1 - M9x1 - M10x1 - M10x1,25

270x230x80 mmCRACK AREA

Prevents glow plugs from being broken during disassembly

420x185x60 mm

Prevents glow plugs from being broken

disassembly

Ac_Neutro_EXP_57_64.indd 60 20/11/15 16:18

61

1462/KD 014620060

960KI 009600235

960PI/P 009600216

Tool assortment for removing Denso injectors, complete with hammer• suitable for Denso injectors mounted on Toyota, Nissan, Mazda, Opel and Lexus vehicles• allows injectors to be removed regardless of engine• does not damage injectors

Tool assortment for removing Denso injectors, complete • suitable for Denso injectors mounted on Toyota, Nissan, Mazda, Opel • suitable for Denso injectors mounted on Toyota, Nissan, Mazda, Opel • suitable for Denso injectors mounted

• allows injectors to be removed

350x210x80 mm

Engine does not need

to be removed

14 pieces

Assortment of 14 special tools and reamers for cleaning injector seatsASSORTMENT CONTENTS:• 3 flat reamers, ø 19/15 mm - ø 17/17 mm - ø 19/17 mm• 2 angled reamers, ø 21/17 mm - ø 17/17 mm • injector washer pulling tool• cutter cleaning brushes• injector cleaning brush• handle and cutter accessories

14 pieces

ø 19/17 mm

Ø

mm

373x280x61 mm

Assortment of common rail diesel injector pullersAllows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed• Mechanical and hydraulic operation• Includes one 12-t hydraulic jack• Can be directly used on vehicle with mounted engine• Numerous adjustment options on head make it possible to work on most engines available

590x470x140 mm

Automotivenew item

Ac_Neutro_EXP_57_64.indd 61 20/11/15 16:18

62

437K/33 004370133

1758VT 017580100

Tool assortment for repairing damaged spark plug threads

Bushes:M8x1,0 - M10x1,0 - M10x1,25 - M12x1,25Taps:M8x1,0 - M10x1,0 - M10x1,25 - M12x1,0 M12x1,25 - M14x1,25

M8x1,0 - M10x1,0 - M10x1,25 - M12x1,25

M8x1,0 - M10x1,0 - M10x1,25 - M12x1,0

210x150x50 mm

1477/C10 014770310

Bent wrench with 9 bits for belt tightening nutsin plastic case• 1 bent wrench with bit drive• 4 double bi-hex bits: 12x14 - 13x15 - 16x17 - 18x19 mm• 5 bits for Torx® head screws: E10 - E12 - E14 - E16 - E18

530x110x55 mm

Cylinder head testing kitContrast liquid makes it possible to quickly check whether expansion tank contains any carbon dioxide.

290x190x50 mm

1759HD/TRUCK

new item

Ac_Neutro_EXP_57_64.indd 62 01/12/15 12:19

63

1759HD/TRUCK 017590065

Truck cooling system testing and sealing toolParts description• 1 bayonet connector cap, Ø 56 mm• 1 threaded cap, Ø 39 mm• 1 coarse threaded cap, Ø 43 mm• 1 fine threaded cap, Ø 43 mm• 1 threaded cap, Ø 49 mm • 1 threaded cap, Ø 59 mm• 1 threaded cap, Ø 69 mm

440x330x100 mm

1759TT 017590300

1759HD/3 017590063

Kit of 4 pairs of turbo circuit testing caps,for use with tyre inflatorsKit contents:• 1 pair of caps sizes 35-40-45 mm• 1 pair of caps sizes 50-55-60 mm• 1 pair of caps sizes 65-70-75 mm• 1 pair of caps sizes 80-85-90 mm• 1 overpressure valve 400x160x100 mm

Cooling system seal testing and circuit filling tools• Make it possible to check circuit (pipes, joints, pumps, radiators) for leaks under pressure and quickly fill circuit, avoiding air bubble formation

600x500x140 mm

Automotive

new item

Ac_Neutro_EXP_57_64.indd 63 20/11/15 16:19

64

1482 014820001

3012C 030120255

Adjustable self-locking wrench for tank floating ring nuts Ø mm 89÷170

Lower engine bracket Ideal for cars and commercial vehicles

Kit for filling diesel oil filtersof cars without electric pumpsAlso for use with tyre inflators

allows quicker replacement jobs on:• timing belt• water pump• alternator

Kit contents:• GM quick couplings• Renault, GM, Fiat quick couplings, inside Ø 6 mm• Renault, GM, Fiat quick couplings, inside Ø 7 mm• Ford quick couplings• PSA quick couplings, inside Ø 6 mm• PSA quick couplings, inside Ø 7 mm• Ford quick couplings• 2 cone-shaped adapters for cars without quick couplings

ADVANTAGES• it takes operator just a few seconds to apply cross member and fix it under vehicle• includes 2 pairs of stabilizer pins, to work on cars, vans and commercial vehicles• loading belt allowing cross member to be held steady, even when chassis does not have any holes

and commercial vehicles

allows quicker replacement jobs on:

1480 014800010

TECHNICAL DATAmax. capacity: 250 kg

length: 1050 mmheight: 120 mm

max. jack height: 260 mmweight: 12 kg

of cars without electric pumps

Kit contents:• GM quick couplings• Renault, GM, Fiat quick couplings, inside Ø 6 mm• Renault, GM, Fiat quick couplings, inside Ø 7 mm• Ford quick couplings• PSA quick couplings, inside Ø 6 mm• PSA quick couplings, inside Ø 7 mm• Ford quick couplings• 2 cone-shaped adapters for cars without quick couplings

410x320x70 mm

new item

new item

Ac_Neutro_EXP_57_64.indd 64 20/11/15 16:19

65

1877 018770008

Exhausted oil drain unit, wheeled, with 90 l tank

65

18771877 018770008

Exhausted oil drain unit,

with 90 l tank

1877A 018770080

1758A 017580010

Automotive

• level indicator• big diameter pan with breakwater grate; capacity: 12 l• transparent pre-chamber: capacity 9.5 l• 1.8 m suction pipe

Exhausted oil drain unit, wheeled, with 90 l tank

018770080

Non-return funnelwith quick coupling, Ø 38 mm Particularly suitable forVolkswagen group cars.

Exhausted oil drain unit / vacuum cleaner, wheeled, with 90 l tank and pre-chamber• pneumatic tank emptying through 1.8 m pipe

Standard accessories:• 1 hard probe, Ø 5x700 mm• 1 flexible probe, Ø 5x700 mm• 1 hard probe, Ø 6x600 mm• 1 flexible probe, Ø 6x700 mm• 1 flexible probe, Ø 7x700 mm• 1 flexible probe, Ø 8x700 mm• adapters for VW, BMW, CITROËN

new item

new item

Ac_Neutro_Exp_65_72.indd 65 23/11/15 15:12

66

Allows cracked and

broken plastic parts

to be quickly fixed

1493/C19 014930019

1368 013680001

1479/B27 014790407

1368G/K400 013680140

Set of 18 oil filter wrenches,particularly suitable for Asian cars

Plastic repair kit

Sizes included in set:Ø mm of sides63-64 1466,5 1474 1479 1584 1487 1692 1594,5 15100,5 1564,5 14 hook wrench for Toyota cars64,5 14 hook wrench for Lexus cars• 6 hexagon sockets, sizes

24-27-30-32.5-36-38 mm, for filter cartridgesKit includes 1 universal adjustable wrench Ø 58÷93 mm

• power supply: 220÷240 V with Schuko socket• heat gun cable length: 3.5 m• power supply cable length: 1.35 m• 2 power adjustments: 35-75 W• heat gun with brass terminals, 2 staple insertion angles: 0°-90°• input protection: thermal circuit breaker• output protection: 10 A fuse• metal gun pocket

14 hook wrench for Toyota cars 14 hook wrench for Lexus cars

broken plastic parts 1368G/K4001368G/K4001368G/K4001368G/K4001368G/K4001368G/K4001368G/K4001368G/K4001368G/K4001368G/K4001368G/K400 013680140

• power supply cable length: 1.35 m

• input protection: thermal circuit breaker

Assortment of 400 clipsfor item 1368Supplied with:• 100 small coil clips• 100 big coil clips• 100 clips for concave angles• 100 clips for convex angles

Kit of 27 nylon tools for removing pins and working on plastics and sealsand seals

new item

490x450x60 mm

Ac_Neutro_Exp_65_72.indd 66 23/11/15 15:12

67

7,5 l1884 018840010

1569/A 015690011

1569/F 015690021

Oil filler tool for manual and automatic gearboxes and differentialsComplete with 12 adaptors for direct connection• Fitted with nonreturn valve for leakage-free oil filling • Delivery: 70 cc per pump shot• Tank capacity: 7.5 l• Maximum permissible oil viscosity: SAE 140

12 adaptors for direct connection

• Maximum permissible oil viscosity: SAE 140

FORD AT-101UNIVERSAL (Bmw, Honda, Nissan...) AT-102VW-AUDI AT-103VW-AUDI-PORSCHE AT-104VW-AUDI-MINI COOPER AT-105MERCEDES AT-106DSG AT-107VW-AUDI CVT AT-108VOLVO AT-109TOYOTA-LEXUS AT-110SKODA AT-111VW Passat/Tiguan <2007 AT-112

12 ADAPTORS

Assortment of tools for removing and installing rear axle silent blocks,driving shaft oil seals and wheel bearings• Bushings can be used both on vehicle and on hydraulic press• Direct extraction with wrench • User-friendly, no pneumatic or hydraulic machines required• Kit contents: 4 threaded bars: M10-M12-M14-M16 4 washers bushings for diameters ranging from 44 mm to 82 mm

530x415x115 mm

Tool assortment for removing and inserting silentblocksFiat Panda, Panda 4x4, Panda Metano and Cross, Fiat 500, Ford Ka and Opel AdamFiat Panda, Panda 4x4, Panda Metano and Cross,

270x230x80 mm

Automotive

AT-101

new item

Ac_Neutro_Exp_65_72.indd 67 23/11/15 15:13

68

1530/C5 015300300

1471M/C22 014710101

Wheel hub and bearing pulling kit, 3, 4, 5 holesKit contents:• 1 universal flange (96÷138 mm)• 1 hydraulic screw (12 t)• 1 hammer face (2.8 kg), required for hubs without central fixing bolts

• 1 universal flange (96÷138 mm)

760x320x120 mm

Pneumatic tool for pushing back and rotating right and left disc brake pistons with accessoriesin plastic case

• Automatic jack• Thrust: 150 kg• Operating pressure 5÷8 bar

• Automatic jack• Thrust: 150 kg• Automatic jack• Thrust: 150 kg• Automatic jack

• Operating • Thrust: 150 kg• Operating • Thrust: 150 kg

pressure 5÷8 bar• Operating pressure 5÷8 bar• Operating

350x310x85 mm

437K/16 004370016

Tool assortment for repairingdamaged threads on brake caliper brackets M9x1.25

210x150x50 mm 210x150x50 mm

1473P 014730020

Clamp pliers for OETIKER® low-profile collars

Clamp pliers for OETIKER® low-profile collars

new item

new item

Ac_Neutro_Exp_65_72.indd 68 01/12/15 12:20

69

The tool has a database which supports repair operations, including:• driving torques• codes of original spares and compatible universal sensors

Impact socket with polymeric insert for Mercedes wheel screw

Suitable for the following Mercedes models:• Classe C e GLK (W204)• Classe E (W211, W212, W207)• Classe SLK (W172)• Classe ML (W164, W166)• Classe CL (W216)• Classe S (W221, W222)

720MRC 007200631

971/C8 009710108

971TSP 009710025

Torque screwdriver with accessoriesfor controlled tightening of tyre valves with pressure control systemfor valves with pressure sensors

335x145x60 mm

583/6 1,2÷6 Nm

892/0862TX T10-T15-T20900L 11-12 mm

986 78

Tyre pressure sensor tool• reading of TPMS sensor information, including: sensor ID inflation pressure temperature battery state • sensor activation• universal sensor programming

TECHNICAL DATAProcessor Cortex M0+, 48 MHzDisplay 1,5” LCD, backlitResolution 64x128 pixelsCable communication USBWireless communication Bluetooth, class 2, with integrated antennaBattery Li-ion type, capacity 1100 mAh, voltage 3.7VLife ca. 8 hoursRecharge via USB, ca. 3 hours

Updates periodic updating of vehicle database after first year

Bluetooth, class 2, with integrated antennaLi-ion type, capacity 1100 mAh, voltage 3.7V

One-year updates included

Includes over 50 brands of vehicles

Automotive

Torque screwdriver with accessories

335x145x60 mm

new item

new item

new item

Ac_Neutro_Exp_65_72.indd 69 23/11/15 15:13

70

Max kg

H min mm

H Max mm

3010/T2 2000 280 425 030100002

3010/T3 3000 285 430 0301000033010/T6 6000 400 580 0301000063010/T10 10000 471 735 030100010

1550/2 015500002

1567 015670001

Pneumatic compressorfor MacPherson and equivalentshock absorber springs• Operating pressure: 6÷8 bars• Maximum thrust at 6.2 bars: 800 kg• Maximum thrust at 8 bars: 975 kg• Piston stroke: 255 mm• Supplied with 3 legs for diameters 90÷205 mm and 1 adjustable vice

1550/21550/21550/21550/2 015500002

Pneumatic compressorfor MacPherson and equivalentshock absorber springs• Operating pressure: 6÷8 bars• Maximum thrust at 6.2 bars: • Operating pressure: 6÷8 bars• Maximum thrust at 6.2 bars: • Operating pressure: 6÷8 bars

• Maximum thrust at 8 bars:

• Piston stroke: 255 mm• Supplied with 3 legs for diameters 90÷205 mm • Supplied with 3 legs for diameters 90÷205 mm • Supplied with 3 legs

and 1 adjustable vice

3x

Mean air consumption

225l/min

It is enough to apply a force

of 20 Nmto apply a force of 20 Nm

200 Kg

PATENTED

Max 20 Nm

0,5 Kg

OK

PATENTED

Max 20 Nm

OK200 Kg0,5 Kg

Lever for removing wishbone heads and shock absorbers from pillarOne operator can position lever effortlesslyand proceed with disassembly

3010T

H

Jack stands, pair

new item

71

3030/2T 030300020

3063/2,5T 030630025

Lowered hydraulic car jack, 2 twith 6 wheels• Car jack can be easily handled on uneven, irregular floors• Minimum plate height: 85 mm• Maximum plate height: 520 mm• Length: 860 mm• Width: 400 mm• Maximum capacity: 2 tons

Pedal allows easy approach

Dual front tilting wheels made of plastic material (PTFE)

• Car jack can be easily handled on uneven,

Dual front tilting wheels made

H min85 mm

2 t

steady, easy to handle

H max520 mm

Air hydraulic jack, 2.5 tons, wheeledParticularly suitable for use on cars and commercial vehiclesIdeal for garages, tyre repairers’ and body shopsFITTED WITH:• automatic arm return• full-load speed control

TECHNICAL DATAcapacity: 2.5tweight: 75 kgpower supply pressure: 8-10 barair consumption: 400 l/min

71

H min85 mm

Automotive

2,5 t

new item

A 1436 mmB 290 mmC 2170 mmD 88 mmE 655 mmF 330 mm

Ac_Neutro_Exp_65_72.indd 71 23/11/15 15:14

72

3065/40-20T 030650200

3067/70-13T 030670130

Air hydraulic jack, 40-20 tons• suitable for use on heavy vehicles• functional and easy to handle, for transportation on mobile repair shops as well• automatic piston return• two descent valves with under load speed control

TECHNICAL DATAcapacity: 40/20 tonsweight: 39 kgpower supply pressure: 8-10 barair consumption: 400 l/min

A 1400 mmB 1320 mmC 525 mmD 270 mmE 150 mmF 78 mmG 72 mmH 150 mmK 206 mmL 300 mmM 20 tN 40 t

Air hydraulic jack, 70-43-23-13 tLong version, suitable for use on lorries, articulated vehicles, buses and coaches, and agricultural machines• automatic piston return• two descent valves with under load speed control

TECHNICAL DATAcapacity: 70-43-23-13 tonsweight: 74 kgpower supply pressure: 8-10 barair consumption: 600 l/min

A 1430 mmB 1320 mmC 1000 mmD 320 mmE 150 mmF 250 mmG 60 mmH 68 mmL 56 mmM 66 mmN 350 mmO 240 mmP 70 tQ 43 tR 23 tS 13 t

40 t

70 t

new item

new item

Ac_Neutro_Exp_65_72.indd 72 23/11/15 15:14

73

3061/2T 030610020

3025 030250001 3025/PF

030250011

Automotive

Maximum capacity: 300 kg

Air hydraulic jack, 2 tons - 2 stagesFitted with:• high-resistance three-layer diaphragm and internal telescopic guide• end-of-stroke stop and overloading safety valve• can also be used on auto lifts

TECHNICAL DATAcapacity: 2 tweight: 14 kgpower supply pressure: 8-10 Barheight: min.132 - max. 326 mm

B 415 mmC 250 mmD 132-326 mmE 2 t

Folding hydraulic crane with dual effect pump• Maximum capacity: 1 t• Folding frame for significantly increased compactness• With load limiting valve and chrome-plated stand• Controlled descent speed• Nylon wheels• Maximum height: 2400 mm• Dimensions: 1560 x 1000 mm

Folding hydraulic crane with dual effect pump• Maximum capacity: 1 t• Folding frame for significantly increased compactness• With load limiting valve and chrome-plated stand• Controlled descent speed• Nylon wheels• Maximum height: 2400 mm• Dimensions: 1560 x 1000 mm

1650

mm

550 mm

1560 mm

4 loading positions: 450-650-800-1000 kg

Barrel handling pliers

Maximum capacity: 300 kg

70 mm

550 ÷ 640 mm

B 415 mmC 250 mmD 132-326 mmE 2 t

2 t

Ac_Neutro_Exp_73_80.indd 73 20/11/15 16:22

74

3026/SP 030260505

3014SAR 030140360

Universal transmission supportAllows one operator to disassemble and reassemble any transmissions of cars, commercial vehicles and off-roaders quickly and safely.commercial vehicles and off-roaders quickly and safely.

360°

Folding engine standMaximum capacity: 450 kg• Easy to fold up, for significantly increased compactness • Allows 360° rotation of engine or gear • Provides unparalleled safety and stability during jobs

500 Kg3026 0,5

030260005

Hydraulic pit and under bridge jack

• Maximum capacity: 300 kg• Pedal pump• Chrome-plated stand• Nylon wheels• Minimum height: 1120 mm• Maximum height: 1970 mm

500 Kg3026 0,53026 0,53026 0,53026 0,53026 0,5

030260005

Maximum capacity: 300 kg

• Chrome-plated stand

• Minimum height: 1120 mm• Maximum height: 1970 mm

• Pedal pump• Chrome-plated stand• Load limiting valve• Nylon wheels• Maximum capacity: 500 kg• Minimum height: 1140 mm• Maximum height: 1990 mm

300 Kg3026 0,3

030260003

Suitable for stands with diameter: 25-30-35-45 mmMax. capacity: 150 kgHeight: 250 mm

1000

mm

920 mm

1145 mm

new item

Ac_Neutro_Exp_73_80.indd 74 20/11/15 16:22

75

Maximum capacity: 20 t

Maximum capacity: 50 t

Automotive

3027 20 030270020

3027 50 030270050

3027/KPP50 030270555

3027/KP50 030270550

Hydraulic press with moving piston• Manual 2-speed pump • Moving piston• Chrome-plated stand• Automatic piston return• Hydraulic safety in case of overloading• Gauge• Set of V-shaped prisms included

Maximum capacity:

Automotive

1900

mm

600 mm

950 mm

Set of pin punches and platefor press item 3027 20Pin punch Ø: 5-10-14-18-24-29 mm

Hydraulic press with moving piston and hoist• Manual 2-speed pump• Moving piston• Chrome-plated stand• Automatic piston return• Hydraulic safety in case of overloading• Gauge• Set of V-shaped prisms

75

Maximum capacity: 50 t

3027 503027 503027 50 030270050

Hydraulic press with moving

• Manual 2-speed pump

• Automatic piston return• Hydraulic safety in case

Pedal control for hydraulic press item 3027 50

Set of pin punches and plate for press item 3027 50Pin punch ø:5-10-14-18-24-29 mm5-10-14-18-24-29 mm

Suitable for stands with diameter: 25-30-35-45 mmMax. capacity: 150 kgHeight: 250 mm

2000

mm

650 mm

1400 mm

Ac_Neutro_Exp_73_80.indd 75 20/11/15 16:22

76

max. capacity: 800 kg

3007 030070001

Underbody trolley for vehicleswithout forecarriage / rear axleAllows vehicles withoutforecarriage or rear axle to be easily handled while working

max. capacity: 800 kg

Underbody trolley for vehicleswithout forecarriage / rear axleAllows vehicles withoutforecarriage or rear axle to be easily handled while working

1400 mm

600 mm

max. capacity: 700 kg

Ø 500 ÷ 1500 mm56”

max. capacity: 700 kg

Ø 500 ÷ 1500 mm56”

• 4 pivoting wheels, including 2 with brakes, suitable for use in painting furnaces• 2 sliding supports to fit all chassis

3008 030080100

Jack and positioner for single and twin truck wheels• min. height: 140 mm• max. height: 660 mm• distance between rollers: 470÷740 mm• hydraulic overloading safety device• front pivoting wheels

As well as for conventional purposes, it is also particularly useful for removing and positioning tanks and bumpers

new item

new item

4 rollers for easy positioning

Ac_Neutro_Exp_73_80.indd 76 20/11/15 16:22

77

3002 030020001

3003 030030001

3009 030090001

2 products in 1: creeper or seat

Automotive

Creeper and seat• Steel frame• PVC lining with upholstery• Easily convertible into a creeper or a seat

420 mm

2 products in 1:

Automotive

420 mm420 mm

100 mm

Creeper made of shockproof plastic

Ø castors: 76 mm

120 mm

Wheel lifterMaximum lifting capacity: 550 kg• 4 pivoting rollers• Roller width: 200 mm• For wheels up to 240 mm in width• For wheels up to 240 mm in width

Ideal for: • loading damaged cars

onto tow trucks• car repair garages

• moving cars in showrooms

Ac_Neutro_Exp_73_80.indd 77 20/11/15 16:22

78

1927CD 019270007

1,9

1927CD1927CD1927CD1927CD 019270007

191 mm

186 mm

Reversible impact wrench, made from composite material• Lightweight and well-balanced for enhanced ease of use• Three power adjustable screwing positions• Exhaust through handle• Silenced

Free speed rpm 7.000Impulse device Double hammerMaximum torque Nm 1.020Bolt capacity Cl 8.8 M2234mmBolt capacity Cl 12.9 M1827mmAir inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 130

Extremely powerful 1750 Nm1927P

019270008

Extremely powerful

1927P1927P1927P1927P 019270008

191 mm

186 mm

Reversible impact wrench, made from composite material• Lightweight and well-balanced for enhanced ease of use• Reversible lever• Three power adjustable screwing positions• Exhaust through handle• Vibration-dumping handle

Free speed rpm 7.500Impulse device Double hammerMaximum torque Nm 1.750Bolt capacity Cl 8.8 M2436 mmBolt capacity Cl 12.9 M2030 mmAir inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 290

2

Ultra compact and powerful 770 Nm

Assortment of one compact reversible impact wrench and five impact sockets,in plastic case• Single hammer impulse device• Amazingly compact and powerful• One-hand reverse button• Three power adjustable screwing/unscrewing positions• Exhaust through handle• Balancing hook

Free speed rpm 10.000Impulse device Single hammerMax. torque Nm 770Bolt capacity Cl 8.8 M2234 mmBolt capacity Cl 12.9 M1827 mmAir inlet GAS 1/4”Operating pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 122

1927XM/K5 019270129

1,3

1927XM/K51927XM/K51927XM/K51927XM/K51927XM/K5 019270129

1927XM/K51927XM/K5

307x206x86 mm

720 17-19-21-22-24 mm

new item

Ac_Neutro_Exp_73_80.indd 78 20/11/15 16:23

79

Pneumatic tools

Free speed rpm 7.000Impulse device Double hammerMaximum torque Nm 1.020Bolt capacity Cl 8.8 M2234mmBolt capacity Cl 12.9 M1827mmAir inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 130

Free speed rpm 7.500Impulse device Double hammerMaximum torque Nm 1.750Bolt capacity Cl 8.8 M2436 mmBolt capacity Cl 12.9 M2030 mmAir inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 290

1928CD 019280007

235 mm

210 mm

Reversible impact wrench, made from composite material• Double hammer impulse device• High weight/power ratio• Reversible lever• Three power adjustable screwing positions• Exhaust through handle• Silenced

3,5

1928DA 019280022

Reversible impact wrench• Double hammer impulse device• Sturdy and compact; high torque• Reversible lever• Three power adjustable positions• Exhaust through handle• Slip-proof ergonomic handle

217 mm

212 mm

Free speed rpm 5.000Impulse device Double hammerMax. torque Nm 1.695Bolt capacity Cl 8.8 M2741mmBolt capacity Cl 12.9 M2436mmAir inlet GAS 3/8”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 240

4,3

728L 27-30-32-36 mm

258 mm

230 mm

5,2

410x330x106 mm

Assortment of one reversible impact wrench and four impact sockets, long series• Extremely powerful in its category• Reversible lever• Three power adjustable screwing positions• Balancing hook

1928K4 019280104

Free speed rpm 4.500Impulse device Double hammerMaximum torque Nm 1.800Bolt capacity Cl 8.8 M2741mmBolt capacity Cl 12.9 M2436mmAir inlet GAS 3/8”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 215

Free speed rpm 4.000Impulse device Pin ClutchMaximum torque Nm 1.493Bolt capacity Cl 8.8 M2741mmBolt capacity Cl 12.9 M2436mmAir inlet GAS 3/8”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 260Weight Kg 9,3

Ac_Neutro_Exp_73_80.indd 79 20/11/15 16:23

80

1930PA 019300032

300 mm

270 mm

9,6

Reversible impact wrench• Extremely lightweight and compact• Auxiliary handle• Reversible lever • Three power adjustable positions

High torque3661 Nm

628 mm

9” (230 mm) 180 mm

High torque3661 Nm

Reversible impact wrench• Double hammer impulse device• 9” long anvil• Auxiliary handle• Reversible lever• Three power adjustable screwing positions• Upper exhaust

1930HLA 019300040

1930HLA1930HLA1930HLA

16,4

4068 Nm4068 Nm

Reversible impact wrench• Double hammer impulse device• Auxiliary handle• Reversible lever• Three power adjustable screwing positions• Upper exhaust

Free speed rpm 3.000Impulse device Double hammerMax. torque Nm 4068Bolt capacity Cl 8.8 M4265mmBolt capacity Cl 12.9 M3655mmAir inlet GAS 1/2”Working pressure Bar 6,2Internal hose size (Ø) mm 13Mean air consumption l/min 480

1930ZL 019300070

15475 mm

180 mm

Free speed rpm 3.500Impulse device Double hammerMaximum torque Nm 2445Bolt capacity Cl 8.8 M3655mmBolt capacity Cl 12.9 M3046mmAir inlet GAS 1/2”Working pressure Bar 6,2Internal hose size (Ø) mm 13Mean air consumption l/min 350

Free speed rpm 3.000Impulse device Double hammerMaximum torque Nm 3661Bolt capacity Cl 8.8 M4265mmBolt capacity Cl 12.9 M3350mmAir inlet GAS 1/2”Working pressure Bar 6,2Internal hose size (Ø) mm 13Mean air consumption l/min 460

Ac_Neutro_Exp_73_80.indd 80 20/11/15 16:23

81

The power of an impact wrench in the body of a ratchet

1927AN 019270012

The power of an impact wrench

Angle reversible impact wrench• Single hammer impulse device• High torque• Reversible lever• Two power adjustable screwing positions• Exhaust through handle

2,1

ø 1/4GAS

350 mm

72mm

1927AN1927AN1927AN1927AN 019270012

1921 I 019210035

Impact reversible ratchet• “Pin Clutch” impulse device• High Torque (101 Nm)• Eliminates torque reaction• Faster than standard ratchets• Ergonomic rubber handle• Rear exhaust

Free speed rpm 400Impulse device Pin ClutchMax. torque Nm 101Bolt capacity Cl 8.8 M1016mmBolt capacity Cl 12.9 M813mmAir inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 235

1,3

275 mm

46 mm

1946C4,8 019460006

1/4 gas

B 245 mm

A 290 mm

1,5

1946C4,81946C4,8

Free speed rpm 4.700Impulse device Single hammerMaximum torque Nm 244Bolt capacity Cl 8.8 M1421mmBolt capacity Cl 12.9 M1219mmAir inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 190

Automatic air suction riveter• Professional air riveter for use with 2.4 - 3.2 - 4.0 - 4.8 mm long steel, stainless steel, aluminium and copper rivets• Pointed cone-shaped spout• Powerful and handy, with handle made of composite material• Complete with safety nail container and oil gun

material/riveter 2,4 3,2 4 4,8

copperaluminium

steel 4stainless steel

4444 4

444 4

444

44

4

Traction power 8900 NStroke length 15 mmWorking pressure 6,2 BarAir inlet 1/4” GASAir consumption 2,6 l/cycleInternal hose size (Ø) 10 mmMaximum rivet capacity stainless steel Ø: 4.8 mm

Ac_Neutro_Exp_81_88.indd 81 20/11/15 16:25

82

130 mm

140 mm

1937/KL 019370161

182 mm

45,1 mm

Die grinder• Designed for heavy and long duty jobs, was the result of high power• Slip-proof housing and handle• Mounted on ball bearings• Knob speed regulator• Swivel air inlet• Silenced rear exhaust• Safety lever device• Collect chuck, 3 mm and 6 mm

Free speed rpm 20.000Chuck capacity mm 3-6Power kW 0,38Air inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 260

1933 I 019330005

670

Orbital mini polisher• Supplied with one backing pad (Ø 75 mm), two polishing sponges (Ø 90 mm) and one lambswool pad (Ø 90 mm) • Pistol grip• Adjustable power regulator• Compact and lightweight• Suitable for polishing lights• Perfect for repairs in tight areas

1937 019370001

230 mm

100 mm

Ø150 mm

100 mm

860

750

193719371937 019370001

1937/KL1937/KL1937/KL1937/KL 019370161

130 mm

• Supplied with one backing pad (Ø 75 mm),

Free speed rpm 3.200Power kW 0,25Pad size mm 75Spindle thread M6Air inlet GAS 1/4”Operating pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 91Polisher weight Kg 0,75

340x300x85 mm

Roto-orbital palm sander, lubrication free, made from composite material• No lubrication required• Extremely compact and easy to handle• Orbit diameter: 5 mm• 6-hole Velcro pad • Continuous motor speed adjustment• Nonslip, soft material handle• Designed for connection to suction systems with swivel fittings• Revolving exhaust

Free speed rpm 12.000Power kW 0,18Pad size mm 150Orbit diameter mm 5Spindle thread 5/16”-24Air inlet GAS 1/4”Operating pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 170

new item

Ac_Neutro_Exp_81_88.indd 82 20/11/15 16:26

83

new item

340x300x85 mm

Air hammer• Compatible with chisels with 10-mm hexagon drive• Can be used for cutting sheet, bolts and bodies, removing welding slags, rivets, plaster and tiles • Supplied with a spring and a bayonet retainer• Speed control button• Ergonomic, non-slip handle for optimal balance • Exhaust through handle• Shock absorption device

Strokes per minute 2900Chisel inlet mm 10Piston size mm 19Piston stroke mm 67Air inlet GAS 1/4”Operating pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 76

1940E10 019400010

266 mm

175 mm

1,7

1932B10 019320040

Reversible drill• Sturdy and handy• Autochuck• Reversible lever• Slip-proof handle• Exhaust through handle

Free speed rpm 1800Chuck capacity mm 1÷10Power kW 0,23Spindle thread 3/8” -24UNFAir inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 160

190 mm

140 mm

Mean air consumption

Free speedChuck capacityPowerSpindle threadAir inletWorking pressureInternal hose size (Ø)Mean air consumption

1,2

445 mm

160 mm

190 mm

Ø 10 mm

1901T/10 019010210

6,5

3,5

Automatic hose reelshock-proof plastic bodyfor compressed air or cold water• Max. operating pressure: 12 bars• Polyurethane hose, Ø 8 mm

Air inlet GAS 1/4”Hose length m 9+1Operating pressure Bar 12

1901BM/8 019010111

370 mm

305 mm

R155 mm

Ø8 mm

370 mm

• Compatible with chisels with 10-mm hexagon drive• Can be used for cutting sheet, bolts and bodies, removing welding slags, rivets, plaster and tiles • Supplied with a spring and a bayonet retainer

• Ergonomic, non-slip handle for optimal balance

Strokes per minuteChisel inlet mmPiston size mmPiston stroke mmAir inlet GASOperating pressure BarInternal hose size (Ø) mmMean air consumption l/min

1,71,7

new item1940E101940E101940E101940E101940E101940E10 019400010

new item

Automatic hose reel, shock-proof plastic body, for compressed air or cold water• Max. operating pressure: 15 bars• Polyurethane hose, Ø 10 mm • Metal clamp, revolving• Device for automatically fixing hose at desired length

Air inlet GAS 3/8”Hose length m 15+1Operating pressure Bar 15

Ac_Neutro_Exp_81_88.indd 83 20/11/15 16:26

84

EU UK 35 2,5 07246023536 3,5 07246023637 4,5 07246023738 5 07246023839 6 07246023940 6,5 07246024041 7 07246024142 8 07246024243 9 07246024344 10 07246024445 10,5 07246024546 11 07246024647 12 07246024748 13 072460248

S3 RS SRC

S3 RS SRC

EU UK 35 2,5 07245023536 3,5 07245023637 4,5 07245023738 5 07245023839 6 07245023940 6,5 07245024041 7 07245024142 8 07245024243 9 07245024344 10 07245024445 10,5 07245024546 11 07245024647 12 07245024748 13 072450248

S3 RS SRC

EU UK 35 2,5 07241053536 3,5 07241053637 4,5 07241053738 5 07241053839 6 07241053940 6,5 07241054041 7 07241054142 8 07241054243 9 07241054344 10 07241054445 10,5 07241054546 11 07241054647 12 07241054748 13 072410548

EU UK 35 2,5 07243033536 3,5 07243033637 4,5 07243033738 5 07243033839 6 07243033940 6,5 07243034041 7 07243034142 8 07243034243 9 07243034344 10 07243034445 10,5 07243034546 11 07243034647 12 07243034748 13 072430348

S3 RS SRC S3 SRC

S1P SRC

7241C

7246B 7245B

7243C

Full-grain leather shoe, waterproof, with penetration proof insole• Steel toe cap• Elastic steel penetration proof insole

Full-grain ankle shoe, with penetration proof insole and quick opening system• Steel toe cap• Elastic steel penetration proof insole

Suede shoe, perforated• Steel toe cap• Elastic steel penetration proof insole

Lace-up full-grain leather ankle shoe, waterproof, with quick opening system and front protection with strap closure• Steel toe cap• Elastic steel penetration proof insole

Ac_Neutro_Exp_81_88.indd 84 20/11/15 16:26

85

S1P SRC

EU UK 35 2,5 07248013536 3,5 07248013637 4,5 07248013738 5 07248013839 6 07248013940 6,5 07248014041 7 07248014142 8 07248014243 9 07248014344 10 07248014445 10,5 07248014546 11 07248014647 12 07248014748 13 072480148

EU UK 35 2,5 07235023536 3,5 07235023637 4,5 07235023738 5 07235023839 6 07235023940 6,5 07235024041 7 07235024142 8 07235024243 9 07235024344 10 07235024445 10,5 07235024546 11 07235024647 12 07235024748 13 072350248

Safety footwear

7248G 7249G

S3 SRC

7235B 7236B

EU UK 35 2,5 07249013536 3,5 07249013637 4,5 07249013738 5 07249013839 6 07249013940 6,5 07249014041 7 07249014142 8 07249014243 9 07249014344 10 07249014445 10,5 07249014546 11 07249014647 12 07249014748 13 072490148

EU UK 35 2,5 07236023536 3,5 07236023637 4,5 07236023738 5 07236023839 6 07236023940 6,5 07236024041 7 07236024142 8 07236024243 9 07236024344 10 07236024445 10,5 07236024546 11 07236024647 12 07236024748 13 072360248

Suede shoe with mesh inserts• Steel toe cap• Elastic steel penetration proof insole

Action Nubuck shoe, waterproof, with nylon inserts• Steel toe cap• Elastic steel penetration proof insole

Action Nubuck ankle shoe, waterproof, with nylon inserts• Steel toe cap• Elastic steel penetration proof insole

Suede ankle shoe with mesh inserts• Steel toe cap• Elastic steel penetration proof insole

new itemnew item

Ac_Neutro_Exp_81_88.indd 85 20/11/15 16:26

86

EU UK 38 5 07310023839 6 07310023940 6,5 07310024041 7 07310024142 8 07310024243 9 07310024344 10 07310024445 10,5 07310024546 11 07310024647 12 073100247

Lace-up full-grain leather shoe, “welder” style, waterproof, with quick opening system and rubber outsole• Steel toe cap• Composite fibre penetration proof insole

7200BKK

7210BKK 7310BKK

7201BKK

S3 RS HRO SRC

S3 SRC

EU UK 35 2,5 07201043536 3,5 07201043637 4,5 07201043738 5 07201043839 6 07201043940 6,5 07201044041 7 07201044142 8 07201044243 9 07201044344 10 07201044445 10,5 07201044546 11 07201044647 12 07201044748 13 072010448

EU UK 35 2,5 07200023536 3,5 07200023637 4,5 07200023738 5 07200023839 6 07200023940 6,5 07200024041 7 07200024142 8 07200024243 9 07200024344 10 07200024445 10,5 07200024546 11 07200024647 12 07200024748 13 072000248

Full-grain leather shoe, waterproof• Composite toe cap• Composite fibre penetration proof insole

Full-grain leather ankle shoe, waterproof• Composite toe cap• Composite fibre penetration proof insole

EU UK 35 2,5 07210033536 3,5 07210033637 4,5 07210033738 5 07210033839 6 07210033940 6,5 07210034041 7 07210034142 8 07210034243 9 07210034344 10 07210034445 10,5 07210034546 11 07210034647 12 07210034748 13 072100348

Soft suede shoe, perforated• Composite toe cap• Composite fibre penetration proof insole

S1P SRC

Ac_Neutro_Exp_81_88.indd 86 20/11/15 16:26

87

EU UK 35 2,5 07201053536 3,5 07201053637 4,5 07201053738 5 07201053839 6 07201053940 6,5 07201054041 7 07201054142 8 07201054243 9 07201054344 10 07201054445 10,5 07201054546 11 07201054647 12 07201054748 13 072010548

EU UK 35 2,5 07200053536 3,5 07200053637 4,5 07200053738 5 07200053839 6 07200053940 6,5 07200054041 7 07200054142 8 07200054243 9 07200054344 10 07200054445 10,5 07200054546 11 07200054647 12 07200054748 13 072000548

7200PN 7201PN

S1P SRC

ImolaS3 SRC

S3 RS SRC

new item new item

Full-grain leather shoe, waterproof, with waterproofsuede inserts• Composite toe cap• Composite fibre penetration proof insole

Full-grain leather ankle shoe, waterproof, with waterproofsuede inserts• Composite toe cap• Composite fibre penetration proof insole

7216SN

new item

Suede sandal, perforated,with strap closure• Composite toe cap• Composite fibre penetration proof insole

EU UK 35 2,5 07216043536 3,5 07216043637 4,5 07216043738 5 07216043839 6 07216043940 6,5 07216044041 7 07216044142 8 07216044243 9 07216044344 10 07216044445 10,5 07216044546 11 07216044647 12 07216044748 13 072160448

SuzukaEU UK 35 2,5 07211043536 3,5 07211043637 4,5 07211043738 5 07211043839 6 07211043940 6,5 07211044041 7 07211044142 8 07211044243 9 07211044344 10 07211044445 10,5 07211044546 11 07211044647 12 07211044748 13 072110448

46 11 07211044647 12 07211044748 13 072110448

7211PGMugellonew item

Suede shoe, perforated• Composite toe cap• Composite fibre penetration proof insole

Ac_Neutro_Exp_81_88.indd 87 20/11/15 16:27

88

EU UK 35 2,5 07316053536 3,5 07316053637 4,5 07316053738 5 07316053839 6 07316053940 6,5 07316054041 7 07316054142 8 07316054243 9 07316054344 10 07316054445 10,5 07316054546 11 07316054647 12 07316054748 13 073160548

EU UK 35 2,5 07313063536 3,5 07313063637 4,5 07313063738 5 07313063839 6 07313063940 6,5 07313064041 7 07313064142 8 07313064243 9 07313064344 10 07313064445 10,5 07313064546 11 07313064647 12 07313064748 13 073130648

EU UK 35 2,5 07313083536 3,5 07313083637 4,5 07313083738 5 07313083839 6 07313083940 6,5 07313084041 7 07313084142 8 07313084243 9 07313084344 10 07313084445 10,5 07313084546 11 07313084647 12 07313084748 13 073130848

EU UK 35 2,5 07323033536 3,5 07323033637 4,5 07323033738 5 07323033839 6 07323033940 6,5 07323034041 7 07323034142 8 07323034243 9 07323034344 10 07323034445 10,5 07323034546 11 07323034647 12 07323034748 13 073230348

S1P SRC

S3 SRC

Suede shoe, waterproof,with microfibre insert• Fibreglass toe cap• Composite fibre penetration proof insole

Suede ankle shoe, waterproof,with microfibre insert• Fibreglass toe cap• Composite fibre penetration proof insole

7313G

7316N 7323M

7313B

Monza

Assen Estoril

new item

Suede shoe with nylon mesh and PU inserts• Fibreglass toe cap• Composite fibre penetration proof insole

Suede shoe with nylon mesh and PU inserts• Fibreglass toe cap• Composite fibre penetration proof insole

Ac_Neutro_Exp_81_88.indd 88 20/11/15 16:27

89

S1P SRC

EU UK 38 5 07250023839 6 07250023940 6,5 07250024041 7 07250024142 8 07250024243 9 07250024344 10 07250024445 10,5 07250024546 11 07250024647 12 072500247

EU UK 38 5 07251023839 6 07251023940 6,5 07251024041 7 07251024142 8 07251024243 9 07251024344 10 07251024445 10,5 07251024546 11 07251024647 12 072510247

EU UK 38 5 07259013839 6 07259013940 6,5 07259014041 7 07259014142 8 07259014243 9 07259014344 10 07259014445 10,5 07259014546 11 07259014647 12 072590147

EU UK 38 5 07258013839 6 07258013940 6,5 07258014041 7 07258014142 8 07258014243 9 07258014344 10 07258014445 10,5 07258014546 11 07258014647 12 072580147

89

46 11 07258014647 12 072580147

S3 SRC

Sepang

Le Mans

7250NKK

7258NKK

7251NKK

7259NKK

Suede shoe, waterproof, with microfibre inserts• Composite toe cap• Composite fibre penetration proof insole

Suede ankle shoe, waterproof,with microfibre inserts• Composite toe cap• Composite fibre penetration proof insole

Suede shoe, waterproof,with waterproof nylon inserts• Composite toe cap • Composite fibre penetration proof insole

Suede ankle shoe, waterproof, with waterproof nylon inserts• Composite toe cap • Composite fibre penetration proof insole

Ac_Neutro_Exp_89_96.indd 89 20/11/15 16:28

90

S3 HRO SRC

EU UK 38 5 07252013839 6 07252013940 6,5 07252014041 7 07252014142 8 07252014243 9 07252014344 10 07252014445 10,5 07252014546 11 07252014647 12 072520147

EU UK 38 5 07253013839 6 07253013940 6,5 07253014041 7 07253014142 8 07253014243 9 07253014344 10 07253014445 10,5 07253014546 11 07253014647 12 072530147

7252NKK

7293NB 7294NB

7253NKK

Zolder

Daytona

S3 SRC

EU UK 38 5 07293053839 6 07293053940 6,5 07293054041 7 07293054142 8 07293054243 9 07293054344 10 07293054445 10,5 07293054546 11 07293054647 12 07293054748 13 072930548

EU UK 38 5 07294053839 6 07294053940 6,5 07294054041 7 07294054142 8 07294054243 9 07294054344 10 07294054445 10,5 07294054546 11 07294054647 12 07294054748 13 072940548

48 13 072930548

Nubuck ankle shoe, waterproof, with waterproof microfibre inserts• Composite toe cap • Composite fibre penetration proof insole

Nubuck ankle shoe, waterproof, with waterproof microfibre inserts• Composite toe cap• Composite fibre penetration proof insole

Greased Nubuck shoe, waterproof• Aluminium toe cap• Composite fibre penetration proof insole

Greased ankle Nubuck shoe, waterproof• Aluminium toe cap• Composite fibre penetration proof insole

Ac_Neutro_Exp_89_96.indd 90 20/11/15 16:29

91

7849BL

Work jacket, • T/C twill, 65% polyester, 35% cotton, 245 g/m2

XSSMLXLXXLXXXLXXXXL

078490100078490101078490102078490103078490104078490105078490106078490107

Work trousers,• T/C twill, 65% polyester, 35% cotton, 245 g/m2

7840BL

XSSMLXLXXLXXXLXXXXL

078400100078400101078400102078400103078400104078400105078400106078400107

• Triple stitching in points more subject to wear• Stretch waistband on sides• Metal zip closure• Two large front pockets• Large left-side pocket with strap closure and insert• Two rear pockets with strap closure• Ruler pocket with pen or small tool inserts• Hammer loop

• Adjustable press-stud cuffs• Front zip closure with strap flap• Stretch waistband for improved fit• Right-side chest pocket with pen or small tool inserts• Left-side chest pocket with strap closure and insert badge• Large waist pockets• Two interior sockets

WorkwearWorkwearnew item

Ac_Neutro_Exp_89_96.indd 91 20/11/15 16:29

92

XSSMLXLXXLXXXLXXXXL

079010900079010901079010902079010903079010904079010905079010906079010907

XSSMLXLXXLXXXLXXXXL

079070900079070901079070902079070903079070904079070905079070906079070907

XSSMLXLXXLXXXLXXXXL

079090900079090901079090902079090903079090904079090905079090906079090907

XSSMLXLXXLXXXLXXXXL

079000900079000901079000902079000903079000904079000905079000906079000907

XSSMLXLXXLXXXLXXXXL

079030900079030901079030902079030903079030904079030905079030906079030907

XSSMLXLXXLXXXLXXXXL

079050900079050901079050902079050903079050904079050905079050906079050907

Work shorts• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

Work jacket• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m²

Work overalls• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

Work trousers, multipocket style• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

Work overalls• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

Sleeveless work jacket, multipocket style• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

7905E7900E

7903E

7901E

7907E7909E

Ac_Neutro_Exp_89_96.indd 92 20/11/15 16:30

93

7865E7860E

7863E

7861E

7869E

7867E

LIGHT 180 g

Work shorts• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

Work jacket• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m²

XSSMLXLXXLXXXLXXXXL

078610900078610901078610902078610903078610904078610905078610906078610907

XSSMLXLXXLXXXLXXXXL

078630900078630901078630902078630903078630904078630905078630906078630907

93

XSSMLXLXXLXXXLXXXXL

078670900078670901078670902078670903078670904078670905078670906078670907

XSSMLXLXXLXXXLXXXXL

078690900078690901078690902078690903078690904078690905078690906078690907

XSSMLXLXXLXXXLXXXXL

078600900078600901078600902078600903078600904078600905078600906078600907

XSSMLXLXXLXXXLXXXXL

078650900078650901078650902078650903078650904078650905078650906078650907

Work overalls, lightweight • T/C twill, 65% polyester, 35% cotton, 180 g/m2

Sleeveless work jacket, multipocket style, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Work jacket, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Work Bermuda shorts, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Work overalls, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Work trousers, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Ac_Neutro_Exp_89_96.indd 93 20/11/15 16:31

94

LIGHT BLUE 180 g

XSSMLXLXXLXXXLXXXXL

078700900078700901078700902078700903078700904078700905078700906078700907

XSSMLXLXXLXXXLXXXXL

078710900078710901078710902078710903078710904078710905078710906078710907

XSSMLXLXXLXXXLXXXXL

078790900078790901078790902078790903078790904078790905078790906078790907

XSSMLXLXXLXXXLXXXXL

078770900078770901078770902078770903078770904078770905078770906078770907

XSSMLXLXXLXXXLXXXXL

078730900078730901078730902078730903078730904078730905078730906078730907

LIGHT BLUE 180 g

XSSMLXLXXLXXXLXXXXL

078750900078750901078750902078750903078750904078750905078750906078750907

Sleeveless work jacket, multipocket style, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Work jacket, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Work Bermuda shorts, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Work overalls, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

Work trousers, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2

7875E 7870E

7873E

7871E

7877E

7879E

Work overalls, lightweight • T/C twill, 65% polyester, 35% cotton, 180 g/m2

Ac_Neutro_Exp_89_96.indd 94 20/11/15 16:31

95

7816G

7815N

XSSMLXLXXLXXXL

078160000078160001078160002078160003078160004078160005078160006

• Large side pockets with press-stud closure, one with badge insert

• Tearproof crotch

Work trousers, multipocket style• T/C canvas, 65% polyester, 35% cotton, 260 g/m2

• Knee pad pockets and leg bottoms reinforced in polyester 600D

• Higher waist in rear part for increased back protection• Stretch rear insert for easier movements• Stretch waistband on sides• Two rear pockets with press-stud closure• Waist key ring

XSSMLXLXXLXXXL

078160100078160101078160102078160103078160104078160105078160106

7816BL

Work trousers, multipocket style• T/C canvas, 65% polyester, 35% cotton, 260 g/m2

• Knee pad pockets and leg bottoms reinforced in polyester 600D

XSSMLXLXXLXXXL

078150000078150001078150002078150003078150004078150005078150006

Work trousers, multipocket style• Twisted T/C canvas, 65% polyester, 35% cotton, 280 g/m2

new item

Ac_Neutro_Exp_89_96.indd 95 20/11/15 16:31

96

XSSMLXLXXLXXXL

075050246075050248075050250075050252075050254075050256075050258

XSSMLXLXXLXXXL

XSSMLXLXXLXXXL

075250046075250048075250050075250052075250054075250056075250058

Work jeans in stretch denim cotton• Made of 68% denim cotton, 29% polyester, 3% stretch fabric, 10 ounces• Stone washed

Camouflage trousers, multipocket style• Made of 100% cotton twill, 260 g/m2

Work jeans in stretch denim cotton • 68% denim cotton, 29% polyester, 3% stretch fabric, 10 ounces• Polyester 600D reinforcements in rear pockets and on leg bottoms

• Ruler pocket and hammer loop

• Two large front pockets, one with small pocket

• Stone-washed

• Cavallo antistrappo

SLIM FIT

• 68% denim cotton, 29% polyester, 3% stretch fabric, 10 ounces• 68% denim cotton, 29% polyester, 3% stretch fabric, 10 ounces• 68% denim cotton, 29% polyester,

• Polyester 600D reinforcements in rear pockets and on leg bottoms• Polyester 600D reinforcements in rear pockets and on leg bottoms• Polyester 600D reinforcements

XSSMLXLXXLXXXL

075260046075260048075260050075260052075260054075260056075260058

7526

75257505M

Ac_Neutro_Exp_89_96.indd 96 20/11/15 16:32

Ac_Neutro_Exp_2 e3 .indd 4 23/11/15 14:25

Promotionsubject 10 avalloDlllly