Date post: | 09-Sep-2015 |
Category: |
Documents |
Upload: | stevej1976 |
View: | 77 times |
Download: | 0 times |
Fall Protection Equipment
Contents
Harnesses & Belts
Vertical Lifelines
Absorbing Lanyards
Restraint Lanyards
Self Retracting Lifelines
Confined Space
Anchorages
Kits
Accessories
Hooks & Karabiners
About Us
Bettersafe are focussed ondelivering innovative safetysolutions to niche markets, andquality in service and product.
.
With over 40 years ofexperience in the safety,distribution and global marketour team strive to push the limiton service and solution, seekingnew products from all over theglobe and bringing themtogether in BettersafeInternational.
With operations in theNetherlands, United Kingdom,New Zealand, Brazil, Germany,France, and Spain, and partnersin the US, Canada, Australia,Asia and across EuropeBettersafe International are trulya global company.
Working in partnership withKratos Safety we have collateda wide range of high qualityand user friendly fall protectionPPE equipment for everysituation.
StandardsEN341 Descender devices for rescue
EN353-1 Guided type fall arrester including a rigid anchor line
EN353-2 Guided type fall arrester including a flexible anchor line
EN354 Lanyards
EN355 Energy absorbers
EN358 Belts for work positioning and restraint and work positioning lanyards
EN360 Retractable type fall arresters
EN361 Full body harnesses
EN362 Connectors
EN363 Personal fall protection systems
EN364 Test methods
EN567 Mountaineering equipment, Rope Clamps, Safety requirements and test methods.
EN795 Anchor devices - Requirements and tests.
EN813 Sit harnesses
EN1496 Rescue lifting devices
EN1498 Rescue Loops
EN12 841 Access Systems - Rope adjustment devices.
EN365 General requirements for instructions for use, maintenance, periodic examination, repair, marketing and packaging
All Fall Protection Products supplied by
Bettersafe International have been verified as CE approved where
required in accordance with the relevant EN
Standard.
Certificates are available on request.
General Information
More Information:
For more information on anything in the following pages pleasecall us on:
NL Office: +31 183 820 280
UK Office:` +44 1260 217 437
Or email
Languages Spoken:
Office Staff:EnglishDutchGermanSpanishPortuguese
External SalesEnglishDutchGermanFrenchSpanish
Placing Orders:
Orders should be sent to:
References:
When placing orders please use the Bettersafesix figure referenceeg. BSH004
Covered identification
label
x2
Lanyard Keepers
+ x2
Lanyard Keepers
+
+ x4+ x3
utomatic Buckles
Automatic
Buckles
+ +x2
+
Covered identification label
Ref : s-l BSH014 (FA 10 201 00)
l-xxl BSH015 (FA 10 201 01)
FLY'IN 2
Attachment Elements: 2 Ideally Positioned Chest attachment textile loops
Positioning.
Adaptability: Adjustable shoulder, thigh-straps and waist belt. Convenience: Shoulder straps have combination buckles and thigh straps
Tool holder loops at the back. Web Keepers on shoulder straps have been provided for easy placement of free lanyards.
Ergonomics: Ideally positioned sit-strap for extended comfort. Speciallycushioned mesh net has been used for better shock absorption & comfortof the user.
Tested for a use by a person up to 136kg.
Ref : s-l BSH008 (FA 10 101 00)
l-xxl BSH009 (FA 10 101 01)
FLY'IN 1
Attachment Elements: 2 Ideally Positioned Chest attachment textile loopsand a Dorsal attachment D-Ring for Fall Arrest. 2 lateral D- Rings for Work and a Dorsal attachment D-Ring for Fall Arrest.
Adaptability: Fully adjustable shoulder, chest strap & thigh-straps. Convenience: Shoulder straps have combination buckles & thigh straps are
provided with automatic buckles for easy adjustment. Web Keepers on& waist strap are provided with automatic buckles for easy adjustment. 2 shoulder straps have been provided for easy placement of free lanyards.
Ergonomics: Specially cushioned mesh net has been used for better shock absorption & comfort of the user.
Tested for a use by a person up to 136kg.
** Covered identification label
A
Tools Holder
Harnesses and Belts
+ x2
Lanyard Keepers
+ x2
+ x4
Automatic Buckles
+Covered identification label
Ref : BSH016 (FA 10 20200)
FLY'IN 3
Attachment Elements: 1 Dorsal & 1 Sternal D- Ring for Fall Arrest, 1Ventral D-
the sides for Work Positioning.
Adaptability: Adjustable shoulder, thigh-straps and waist belt. Convenience: Shoulder straps and thigh straps are provided with automatic
buckles & waist strap has combination buckles for easy adjustment. 2 Toolholder loops & an extra bigger handle at the back for keeping extra karabinersand accessories. Web Keepers on shoulder straps have been provided for easyplacement of free lanyards.
Ergonomics: Ideally positioned elasticated straps for extended comfort.Specially cushioned mesh net has been used for better shock absorption &comfort of the user.
Tested for a use by a person up to 136kg.
Ring at waist level in front for Rope Access & 2 lateral D-Rings at waist level on
Tools Holder
Harnesses and Belts
+
Dorsal AttachmentPoint
+
Combination Buckles
Front Attachment Point
Covered identification label+
Elastic Webbing: Designed for users who areasking for high comfort, the elastic webbing
from the MOVE range provide great freedom
of movement for a long-term use.
+ - 5%
Ref : BSH011 (FA 10 10700)
MOVE1
Attachment Elements: A sternal attachment D- Ring and a Dorsal attachmentD-Ring for Fall Arrest.
Adaptability: Adjustable shoulder and thigh straps. Convenience: Metal components made up of Stainless Steel for excellent
corrosion protection.
Ergonomics: Made of Elastic webbing for more comfort and impact resistance
+
+Ref : BSH024 (FA 10 20800)
MOVE2
The Harness FA 10 208 00 is a combination of FA 10 107 00 (specifications given above) Along with work positioning Belt FA 10401 00 permanently incorporated in the Harness.
To be used for both Work positioning and Fall arrest purposes.
Dorsal AttachmentPoint
+
Combination Buckles
+
Front Attachment Point
+
Covered identification label
ofLanyard Keepers
+
Electrical protection
FRONT BACK
Ref : BSH025 (FA 1021000)
Special Windmill harness with electric protection: This harness has been designed to
maintenance and evacuation ....
Attachment Elements: 1 Dorsal & 1 Sternal D- Ring for Fall Arrest, 1Ventral D- Ring at
Work Positioning.
Adaptability: Adjustable shoulder, thigh-straps and waist belt. Convenience:Complete protection straps, on the back of the harness against friction.
has combination buckles for easy adjustment. 3 extra bigger handles at the back for
been provided for easy placement of free lanyards. D-Rings and metal parts equipped
offer the perfect solution to work in the field of wind energy: construction,
waist level in front for Rope Access & 2 lateral D-Rings at waist level on the sides for
Shoulder straps and thigh straps are provided with automatic buckles & waist strap
keeping extra karabiners and accessories. Web Keepers on shoulder straps have
with insulated cover to make it completely safe against electrical hazards .
Ergonomics: Ideally positioned elasticated straps for extended comfort. Speciallycushioned mesh net has been used for better shock absorption & support of the user.
Complete protection the webbing
+
+
Covered identification
Harnesses and Belts
+Extension Strap
+Ref : BSH012 (FA 10 10900)
Antistatic Full Body Harness: This harness has been designed to offer theperfect solution for safe work at height in explosive atmospheres. It is suitablefor petrochemical, mining, .... industry environments.
Attachment Elements: 2 Chest attachment textile loops and a forgedaluminium Dorsal D- Ring with extension band for Fall Arrest.
Adaptability: Adjustable shoulder and thigh- straps. Convenience: Stainless steel buckles for excellent corrosion protection. The
Anti-static webbing prevents the risk of an electrostatic discharge ignitingthe
high risk environments.
Ergonomics: Ideally positioned sit-strap for extended comfort. Compliance: Conforms to EN 1149-1 : 2006, EN 13463-1 : 2009, EN 13463-5 :
explosive atmosphere thus allowing the user to work in complete safety in these
2003
Combination Buckles
+
Chest strap
+
ed identification label
45 mm
Cover
+
+
Ref : BSH022 (FA 10 20700)
Full Body Harness 2 attachment points with rotative belt and 3Automatic Buckles.
Attachment Elements: 2 big size chest attachment textile loops, 1 Dorsal D-
strap attached on the dorsal D-Ring at one end and one loop at the other side.
Adaptability: Adjustable shoulder, thigh-straps and waist belt. Convenience: Shoulder straps have combination buckles and thigh-straps,
Ring for fall arrest, 2 Lateral D-Ring for Work positioning. With an extension
waist straps are provided with automatic buckles for easy adjustment.
Ergonomics: Special rotative belt for easy mobility and great comfort .
+
180
+ x3
Automatic Buckles
Extension Strap
Front Attachment
Covered identification
label
Harnesses and Belts
Ref : BSH007 (FA 10 20500)
Body harness 2 attachment points which 1 on thoracic strap with comfortablework positioningbelt
Incorporatedwith our Work PositioningBelt FA 1040100
Attachment Elements: 1 Chest attachment D- Ring and a Dorsal attachment D-Ring for Fall Arrest. 2 Lateral D-Rings for Work Positioning.
Adaptability: Adjustable shoulder and thigh-straps. Convenience:Shoulder and thigh- straps differentiated by a dual colour scheme. Ergonomics: Ideally positioned sit- strap for extended comfort.
+
Front Attachment
Ref : BSH021 (FA 10 20600)
Comfortablesuspensionbodyharnesswith work positioningbelt
Attachment Elements: 1 Dorsal and 1 Sternal D- Ring for Fall Arrest. 1 Ventral D -
Positioning.
Adaptability: Adjustable shoulder, thigh-straps and waist belt. Convenience: An ideal combination of Fall Arrest, Work Positioning, Rescue and
Rope access applications.
Ergonomics: Soft padding on shoulder, waist and leg straps for an extended
+
Padded Dorsal Pad
BACK
Ring at waist level for Rope Access work and 2 Lateral D- Rings for Work
comfort.
Ventral D-Ring
Ref : BSH033 (FA 10 40300)
Sit workpositionbelt
Attachment Elements: 2 Lateral Metallic D-Rings for Work Positioning. 1 front ventral attachment (Metallic D-Ring) for rope access.
Adaptability: Adjustable thigh-straps and waist belt. Convenience:Ideal for Work Positioning, Restraint System and Rope Access work. Ergonomics: The waist belt and the leg straps are provided with a soft padding for
best possible comfort.FRONT
BACK
Harnesses and Belts
rap
+
Padded Dorsal Pad
Ref : BSH020 (FA 10 20401)
Body harness 2 attachment points with comfortable work positioningbeltand3 automaticbuckles
Incorporated with our Work Positioning Belt FA 10 401 00 with automaticbuckle
Attachment Elements: 2 Chest attachment textile loops and a Dorsal attachment D-Ring for Fall Arrest. 2 lateral D-Rings for Work Positioning.
Adaptability: Adjustable shoulder, thigh-straps and waist belt. Convenience: Shoulder and thigh-straps differentiated by a dual colour
(length : 30 cm) which allows the user to easily connect himself to the dorsalscheme. Tool holder loops and rings at the back. Unique extension band
attachment D-Ring without any external help.
Ergonomics: Ideally positioned sit-strap for extended comfort Tested for a use by a person up to 136kg.Automatic Buckles
Covered identification label
Ref : BSH019 (FA 10 20400)Body harness 2 attachment points with comfortable workpositioningbeltIncorporated with our Work PositioningBelt FA 10 401 00
Attachment Elements: 2 Chest attachment textile loops and a Dorsal attachment D-Ring for Fall Arrest. 2 Lateral D-Rings for Work Positioning.
Adaptability: Adjustable shoulder, thigh-straps and waist belt. Convenience: Shoulder and thigh-straps differentiated by a dual colour
scheme. Tool holder loops and rings at the back.
Ergonomics: Ideally positioned sit-strap for extended comfort. Tested for a use by a person up to 136kg.
+
Front Attachment
Ref : BSH031 (FA 10 40100)
ComfortableWork PositioningBelt
Wide comfort pad to provide lumbar support for long working hours Fully Adjustable 2 Lateral D-Rings for Work Positioning Tool holding webbing loops Rings for tool holders, bolt bags, etc...
FRONT
BACK
+
Extension St
BACK
+ x3
+
Harnesses and Belts
Ref : BSH006 (FA 10 10800)
Bodyharness 1 attachmentpoint
Attachment Elements:Dorsal attachment D- Ring for Fall Arrest. Adaptability: Adjustable shoulder and thigh- straps. Convenience: Shoulder and thigh-straps differentiated by a dual colour
scheme.
Ergonomics: Ideally positioned sit-strap for extended comfort.
+Ref : BSH004 (FA 10 105 00)
Bodyharness 2 attachmentpointswhich 1 on thoracicstrap
Attachment Elements: 1 Chest attachment D- Ring and a Dorsal attachmentD- Ring for Fall Arrest.
Adaptability: Adjustable shoulder and thigh-straps. Convenience: Shoulder and thigh- straps differentiated by a dual colour
scheme.
Ergonomics: Ideally positioned sit- strap for extended comfort.
Front Attachment
+ EN 1497
Ref : BSH005 (FA 10 10600)
Bodyharness 2 attachmentpointsand 1 extensionrescuestrap
Attachment Elements: 1 Sternal attachment D-Ring and a Dorsal attachmentD-Ring for Fall Arrest; Extension Rescue strap with top D- Ring for Rescue.
Adaptability: Adjustable shoulder and thigh- straps. Convenience: Shoulder and thigh-straps differentiated by a dual colour
scheme.
Ergonomics: Ideally positioned sit-strap for extended comfort. Compliance: Conforms to EN 1497: 1996
Extension RescueStrap with D-Ring
+
Front Attachment
Harnesses and Belts
+ x2
2 Indepandanttont Attachmen
Ref : BSH036 (FA 10 11100)Full bodyharness 3 attachment points with 3 automatic buckles
Attachment Elements: 2 Independant attachment D-Ring & a Dorsalattachment D-Ring for fall arrest.
Adaptability: Adjustable shoulder & thigh straps Convenience: Shoulder and thigh-straps differentiated by a dual colour
scheme
Ergonomics: Thing Straps and chest strap have automatic buckles. Ideallypositioned sit-strap for extended comfort.
x3
Automatic Buckles
d identification label
+Padded Dorsal Pad
Ref :BSH010 (FA 10 10401)
Comfortable full body harness 2 attachment points with 2 automaticbuckles
Attachment Elements: 2 Chest attachment textile loops & a Dorsal attachment D-Ring for fall arrest.
Adaptability: Adjustable shoulder & thigh straps Convenience: Shoulder and thigh-straps differentiated by a dual colour
scheme
Ergonomics: Soft Padding on shoulder for extreme comfort. Thing Straps have automatic buckles. Ideally positioned sit-strap for extendedcomfort.
Tested for a use by a person up to 136kg.
+ x2
Automatic Buckles
+
Covered identification label
Ref : BSH003 (FA 10 10400)Body Harness 2 Attachment Point
Attachment Elements: 2 Chest attachment textile loops and a Dorsalattachment D- Ring for Fall Arrest.
Adaptability: Adjustable shoulder and thigh-straps. Convenience: Shoulder and thigh-straps differentiated by a dual colour
scheme.
Ergonomics: Ideally positioned sit-strap for extended comfort. Tested for a use by a person up to 136kg.
+
Front Attachment
+
Extension Strap
BACK
Covere
Harnesses and Belts
FRONT
+
Front Attachment Ref :BSH029 (FA 10 30200)
Full body harness 2 attachment points with High visibilityYellow work vest
Incorporated in a reflective vest this harness is built intothe vest to create a no-tangle body wear system.
Vest in polycoton (240g/m2)
Attachment Elements: 2 Chest attachment textile loops and aDorsal attachment D- Ring for Fall Arrest.
Adaptability: Adjustable shoulder and thigh- straps. Ergonomics: Ideally positioned sit-strap for extended comfort &,
reflective strips down the front for visibility & durable zipper.
Tested for a use by a person up to 136kg. Compliance: EN 471class 2.2
BACK
Adjustable Zip System
FRONT
+
Front AttachmentRef : BSH030 (FA 10 30300)
Full body harness 2 attachment points with High visibilityOrange work vest
Incorporated in a reflective vest this harness is built intothe vest to create a no-tangle body wear system.
Vest in polycoton (240g/m2)
Attachment Elements: 2 Chest attachment textile loops and aDorsal attachment D-Ring for Fall Arrest.
Adaptability: Adjustable shoulder and thigh- straps. Ergonomics: Ideally positioned sit-strap for extended comfort &,
reflective strips down the front for visibility & durable zipper.
Tested for a use by a person up to 136kg. Compliance: EN 471class 2.2
BACK
Adjustable Zip System
Harnesses and Belts
Ref : BSH001 (FA 10 10200)
Bodyharness 1 attachmentpoint Attachment Elements: A Dorsal Attachment D- Ring for Fall Arrest.
Adaptability: Adjustable thigh-straps; Sliding Plates for easy adjustment of Chest-
Strap.
Convenience: Shoulder and thigh-straps differentiated by a dual colour scheme.
Ergonomics: Ideally positioned sit-strap for extended comfort.
Ref : BSH002 (FA 10 10300)
Bodyharness 2 attachmentpoints
Attachment Elements: 2 Chest attachment textile loops and a Dorsal
attachment D- Ring for Fall Arrest.
Adaptability: Adjustable thigh-straps; Sliding Plates for easy
adjustment of Chest- Strap.
Convenience: Shoulder and thigh-straps differentiated by a dual
colour scheme.
Ergonomics: Ideally positioned sit-strap for extended comfort.
Ref : BSH018 (FA 10 203 00)
Body harness 2 attachment points with work positioning beltIncorporated with our Work Positioning Belt FA 10 402 00 Attachment Elements: 2 Chest attachment textile loops and aDorsal attachment D-Ring for Fall Arrest. 2 Lateral D-Rings forWork Positioning. Adaptability: Adjustable thigh-straps and waist belt; SlidingPlates for easy adjustment of Chest- Strap. Convenience: Shoulder and thigh-straps differentiated by adual colour scheme. Tool holder loops and rings at the back. Ergonomics: Ideally positioned sit-strap for extended comfort.
Harnesses and Belts
Manual locked position to
BSV001 (FA 20 100 00 A) BSV002 (FA 20 100 00 B)
Fall Arrester on Polyamidetwisted Rope Fall Arrester on Polyamide twisted Ropewith energyabsorbinglanyard
Works on 14mm - 16mm dia anchorage line Works on 14mm - 16mm dia anchorage line
Energy absorber and Steel Karabiner FA 50 10117
as an attachment element
Simple opening / closing and automatic locking by a double security system.
Has a unique non-inverting system to preventinstalling the device upside down on the anchorline.
Has a manual locked position to allow work on inclined roof
Minimum breaking strength:15kN
Steel Karabiner FAattachmentelement
50 101 17 as an
Simple opening / closing and automaticlocking by a double security system.
Has a unique non-inverting system toprevent installing the device upside downon the anchor line.
Has a manual locked position to allow workon inclined roof
Minimum breaking strength:15kN
allow work on inclined roof
Made up of 14-16mm dia polyamide twisted rope conforms to EN 696 Abrasion resistant thimble to protect the loops from being damaged by
metallic contact
Spliced end is protected with a strong transparent covering sleeve
Coloured tracer strand losing colour which shows the rope is unfit for use.
Unique non-inverting system to
prevent installing the device
upside down on the anchor line.
Vertical Lifelines
BSV003 Flexible Anchorage Line - 5 metres
BSV004 FA 20 100 10 Flexible Anchorage Line - 10 metres
BSV005 Flexible Anchorage Line for - 15 metres
BSV006 FA 20 100 20 Flexible Anchorage Line for - 20 metres
BSV007 Flexible Anchorage Line for - 25 metres
BSV008 FA 20 100 30 Flexible Anchorage Line for - 30 metres
BSV009 FA 20 100 40 Flexible Anchorage Line for - 40 metres
BSV010 FA 20 100 50 Flexible Anchorage Line for - 50 metres
CompactFall Arrester onkernmantle Rope,multi-use
Works on 12mm dia anchorage line, without any manual intervention.
Steel Karabiner as an attachment element.
Very simple opening / closing system.
Has a manual locked position to allow work on inclined roof, and also restraint positioning (EN 358).
Minimum breaking strength:15kN
Anchor line made up of 12 mm dia polyamide kernmantle rope conforms to EN 1891, equiped with a energy dissipator at anchorage
end.
Abrasion resistant thimble to protect the loops from being damaged by metallic contact, and stop knot at the other side.
Spliced end is protected with a strong transparent covering sleeve
Colored tracer strand losing colour which shows the rope is unfit for
use.
Vertical Lifelines
BSV024 FA 20 103 00 Rope Grab
BSV025 FA 20 103 10 Kernmantle rope anchor line 10m
BSV026 FA 20 103 20 Kernmantle rope anchor line 20m
Twisted Rope Lanyards made up : Longes toronnesavec absorbeurd'energiecomposesde :
Energy absorber in 44 mm wide webbing which reduces the impact of the fall Absorbeur d'nergie en sangle largeur 44 mm afin d'avoir un impact en cas
12 mm diam polyamide twisted rope lanyard. Longe en corde polyamide toronne diam 12 mm.
Spliced end protected with strong transparent covering sleeve.
EN355:2002
Kg Kg
less than 6kN.
Loops protected by an abrasion resistant thimble.
Absorbing Lanyards
BSL012 FA 30 100 15 Energy absorber 45 mm with twisted rope lanyard length 1.5 m
BSL013 FA 30 100 20 Energy absorber 45 mm with twisted rope lanyard length 1.8 m
BSL015 FA 30 101 20 Energy absorber 45 mm with twisted rope lanyard 1.8 m and a
steel snap hook
BSL016 FA 30 102 15 Energy absorber 45 mm with twisted rope lanyard 1.5 m and a
steel scaffold hook
BSL018 FA 30 103 15 Energy absorber 45 mm with twisted rope lanyard 1.5 m. with a
steel snap hook opening 17 mm and a steel scaffold hook
opening 55 mmBSL019 FA 30 103 20 Energy absorber 45 mm with twisted rope lanyard 2 m and a
steel snap hook opening 17 mm and a steel scaffold hook
opening 55 mm
Webbing Lanyards made up : Longes en sangleavec absorbeurd'energiecomposesde :
Energy absorber in 35 mm wide webbing which reduces the impactof the fall to less than 6kN 30 mm wide polyesterwebbing lanyard. Longe en sangle polyester largeur 30 mm.
sistance l'abrasion.
Kg Kg
Kg Kg
Kg Kg
Kg
Loops protected by an abrasion resistant tubular webbing.en cas de chute infrieur 6kN.
Boucles protges par une sangle tubulaire pour une meilleure
Absorbing Lanyards
BSL020 FA 30 300 15 Energy absorber 45 mm with webbing lanyard length 1.5 m
BSL021 FA 30 300 20 Energy absorber 45 mm with webbing lanyard length 1.8 m
BSL001 FA 30 302 15 Energy absorber 45 mm with webbing lanyard 1.5 m and a
steel scaffold hook
BSL024 FA 30 302 20 Energy absorber 45 mm with webbing lanyard 1.8 m and a
steel scaffold hook
BSL020 FA 30 300 15 Energy absorber 45 mm with webbing lanyard length 1.5 m
BSL021 FA 30 300 20 Energy absorber 45 mm with webbing lanyard length 1.8 m
BSL002 FA 30 304 18 Energy absorber 35 mm with webbing lanyard 1.8 m with a
screw-locking karabiner and a steel scaffold hook
ENERGY ABSORBING KERNMANTLE ROPE LANYARDS / LONGES TRESSEES AVEC ABSORBEUR D'NERGIE
KernamantleLanyards made up : Longes tresses avec absorbeurd'energiecomposesde :
Energy absorber in 35 mm wide webbing which reduces the impact of the fall Absorbeur d'nergie en sangle largeur 35 mm afin d'avoir un impact en cas
12mm diam polyamide Kernmantlerope lanyard. Longe en corde polyamide tresse diam 12mm. Loops protected by an abrasion resistant thimble. Boucles cosses pour une meilleure rsistance l'abrasion. Sewing protected with strong transparent covering sleeve. Coutures protges sous gaine transparente.
Kg Kg
to less than 6 kN.
Longueur de 1.40 m to 2 m
Absorbing Lanyards
BSL003 FA 30 500 15 Energy absorber 35 mm with kernmantle rope lanyard length
1.5 m
BSL004 FA 30 500 20 Energy absorber 35 mm with kernmantle rope lanyard length
1.8 m
BSL030 FA 30 502 15 Energy absorber 35 mm with kernmantle rope lanyard 1.5 m
and a steel scaffold hook
BSL031 FA 30 701 20 Energy absorber 35 mm with expandable webbing lanyard
1.8 m and steel snap hook
BSL006 FA 30 503 15 Energy absorber 45 mm with kernmantle rope lanyard 1.5 m
with a steel snap hook opening 17 mm and a steel scaffold
hook opening 55 mmBSL007 FA 30 503 20 Energy absorber 45 mm with kernmantle rope lanyard 2 m with
a steel snap hook opening 17 mm and a steel scaffold hook
opening 55 mm
BSL037 FA 30 512 20 Energy absorber 35 mm with kernmantle rope lanyard 1.8 m
and a green aluminium scaffold hook
BSL038 FA 30 513 20 Energy absorber 45 mm with kernmantle rope lanyard 2 m with
a green aluminium snap hook and a green aluminium scaffold
hook
BSL039 FA 30 514 20 Energy absorber 35 mm with kermantle rope lanyard maxi 2
mtrs with a ring adjuster and 1 green aluminium screw
karabiner and 1 green aluminium scaffold hook
ExpandableLanyards made up : Longes en sanglelastiqueavec absorbeurd'energiecomposesde:
Energy absorber in 35 mm wide webbing which reduces the impact of the fall Absorbeur d'nergie en sangle largeur 35 mm afin d'avoir un impact en cas
45 mm wide polyesterexpandable elasticated webbing lanyard. Longe en sangle lastique polyester largeur 45 mm. Expanded length: 2 m. Longueursoustension:2m. Relaxed length: 1.4 m. Longueurau repos:1.4m. Loops protected by an abrasion resistant tubular webbing. Boucles protges par une sangle tubulaire pour une meilleure rsista
to less than 6
kN.
Absorbing Lanyards
BSL008 FA 30 700 20 Energy absorber 35 mm with expandable webbing lanyard
length 1.8 m
BSL009 FA 30 702 20 Energy absorber 35 mm with expandable webbing lanyard
1.8 m and scaffold hook
BSL010 FA 30 703 20 Energy absorber 45 mm with expandable webbing lanyard
2m with a steel snap hook opening 17 mm and a steel scaffold
hook opening 55 mm
BSL041 FA 30 712 20 Energy absorber 35 mm with expandable webbing lanyard
1.8 m and green aluminium scaffold hook
Absorbing Lanyards
BSL035 FA 30 400 18 Forked energy absorber 35 mm with webbing lanyards 1.8 m
with 2 steel scaffold hooks opening 55 mm and a screw
karabiner opening 17 mm
BSL035N FA 30 400 18 with no hook1.8m Twin Shock absorbing Web Lanyard, No Hooks
BSL042 FA 30 713 20 Energy absorber 45 mm with expandable webbing lanyard
2m with a green aluminium snap hook and a green aluminium
scaffold hook
Twisted Rope Lanyards
Made up of 12mm diam polyamide twisted rope. Abrasion resistant thimble to protect the loops from being damaged by
metallic contact.
Spliced end is protected with a strong transparent covering sleeve. Colored tracer strand losing colour which shows the lanyard is unfit for use. Breaking Strength is 22 kN as per the norm EN 354:2002.
Work PositioningLanyardwith RingAdjuster Abrasion resistant thimble to protect the loop from being
damaged by metallic contact
Forged alloy steel ring-adjuster
Work PositioningLanyardwith Grip Adjuster Abrasion resistant thimble to protect the loop from being damaged by metallic
contact
Stainless steel rope grab adjuster, for an easy "one hand" length adjustment
Restraint Lanyards
BSR033 FA 40 100 10 Twisted rope lanyard length 1 m
BSR034 FA 40 100 15 Twisted rope lanyard length 1.5 m
BSR035 FA 40 100 20 Twisted rope lanyard length 1.8 m
BSR039 FA 40 102 10 Twisted rope lanyard 1 m with a steel scaffold hook opening 55
mm
BSR040 FA 40 102 15 Twisted rope lanyard 1.5 m with a steel scaffold hook opening
55 mm
BSR041 FA 40 102 20 Twisted rope lanyard 1.8 m with a steel scaffold hook opening
55 mm
BSR042 FA 40 103 10 Twisted rope lanyard 1 m with a steel snap hook opening 17
mm and a steel scaffold hook opening 55 mm
BSR043 FA 40 103 15 Twisted rope lanyard 1.5 m with a steel snap hook opening 17
mm and a steel scaffold hook opening 55 mm
BSR044 FA 40 103 20 Twisted rope lanyard 1.8 m with a steel snap hook opening 17
mm and a steel scaffold hook opening 55 mm
BSR045 FA 40 900 20 Twisted work positioning lanyard 2 m with a ring adjuster and 2
steel screw karabiners opening 17 mm
BSR046 FA 40 904 20 Twisted work positioning lanyard 2 m with a grip adjuster and 2
steel screw karabiners opening 17 mm
Webbing Lanyards
Made up of 30mm wide polyester webbing. Loops protected by an abrasion resistant tubular webbing Breaking Strength is 22kN as per the norm EN 354:2002.
Restraint Lanyards
BSR001 FA 40 300 10 Webbing lanyard length 1 m
BSR002 FA 40 300 15 Webbing lanyard length 1.5 m
BSR003 FA 40 300 20 Webbing lanyard length 1.8 m
BSR004 FA 40 301 10 Webbing lanyard 1 m with a steel snap hook opening 17 mm
BSR005 FA 40 301 15 Webbing lanyard 1.5 m with a steel snap hook opening 17 mm
BSR006 FA 40 301 20 Webbing lanyard 1.8 m with a steel snap hook opening 17 mm
BSR010 FA 40 303 10 Webbing lanyard 1 m with a steel snap hook opening 17 mm
and a steel scaffold hook opening 55 mm
BSR011 FA 40 303 15 Webbing lanyard 1.5 m with a steel snap hook opening 17 mm
and a steel scaffold hook opening 55 mm
BSR012 FA 40 303 20 Webbing lanyard 2 m with a steel snap hook opening 17 mm
and a steel scaffold hook opening 55 mm
BSR030 FA 40 901 20 Webbing work positioning lanyard 2 m with a ring adjuster and
2 steel screw karabiners opening 17 mm
Kernmantle Lanyards
Made up of 12mm diam polyamide Kernmantle rope. Abrasion resistant thimble to protect the loops from being damaged
by metallic contact.
Sewing protected with a strong transparent covering sleeve which not
inspection prior to use.
Breaking Strength is 22kN as per the norm EN 354:2002.
only protects the ends , but also makes the stitches visible for easy
Restraint Lanyards
BSR013 FA 40 500 10 Kernmantle rope lanyard length 1 m
BSR014 FA 40 500 15 Kernmantle rope lanyard length 1.5 m
BSR015 FA 40 500 20 Kernmantle rope lanyard length 1.8 m
BSR019 FA 40 502 10 Kernmantle rope lanyard 1 m with a steel scaffold hook
opening 55 mm
BSR020 FA 40 502 15 Kernmantle rope lanyard 1.5 m with a steel scaffold hook
opening 55 mm
BSR021 FA 40 502 20 Kernmantle rope lanyard 1.8 m with a steel scaffold hook
opening 55 mm
BSR022 FA 40 503 10 Kernmantle rope lanyard 1 m with a steel snap hook opening
17 mm and a steel scaffold hook opening 55 mm
BSR023 FA 40 503 15 Kernmantle rope lanyard 1.5 m with a steel snap hook opening
17 mm and a steel scaffold hook opening 55 mm
BSR024 FA 40 503 20 Kernmantle rope lanyard 2 m with a steel snap hook opening
17 mm and a steel scaffold hook opening 55 mm
BSR025 FA 40 600 15 Forked kernmantle lanyard 1.5 m with a steel snap hook
opening 17 mm and 2 steel scaffold hooks opening 55 mm
BSR031 FA 40 902 20 Kernmantle work positioning lanyard 2 m with a ring adjuster
and 2 steel screw karabiners opening 17 mm
BSR032 FA 40 903 20 Kernmantle work positioning lanyard 2 m with a grip adjuster
and 2 steel screw karabiners opening 17 mm
Expandable Lanyards
The Lanyards are ideal for usage in conditions where there are chances forthe user tripping over the Lanyard.
The elastic nature of the lanyard reduces the actual effective length of theLanyard thereby reducing the hazards.
Made up of 44mm wide Expandable Lanyard. Expandable Length: 2m Relaxed Length: 1.4m Loops protected by an abrasion resistant tubular webbing Breaking Strength is 22 kN as per the norm EN 354:2002.
Restraint Lanyards
BSR026 FA 40 700 20 Expandable lanyard length 1.8 m
BSR028 FA 40 702 20 Expandable lanyard 1.8 m with a steel scaffold hook opening
55 mm
BSR029 FA 40 703 20 Expandable Lanyard 2 m with a 55 mm scaffold hook and 17
mm steel snap hook
Fall Indicator
OLYMPE cable,retractablefall arrest 3,5m
Casing made up of high impact strength Polymer, toprevent breakage.
Comes with Galvanized Steel Wire Rope of diam 4.5
lanyard.
Internal braking mechanism to reduce the fall arrest
mm with a snout for a better gripping of the retractable
force less than 6kN.
Swivel at anchorage end,
connector with load indicator. Minimum breaking strength:12 kN
Fall Indicator
OLYMPE cable,retractablefall arrest 7 m
Casing made up of high impact strength Polymer, toprevent breakage.
Comes with Galvanized Steel Wire Rope of diam 4.5
lanyard.
Internal braking mechanism to reduce the fall arrest
mm with a snout for a better gripping of the retractable
force less than 6kN.
Swivel and FA 50 101 17 at anchorage end,
indicator.
Minimum breaking strength:12kN
at attachment end. FA 50 203 11 connector with load
Polymer Casing With Galvanized Steel Wire Rope
Self Retracting Lifelines
BSB017 FA 20 400 03 Retractable fall arrester polymer casing 3.5 m galv anized steel
wire rope
BSB026 FA 20 400 07 Retractable fall arrester polymer casing 7m galv anized steel
wire rope
OLYMPE cable,retractablefall arrest 10m
Casing made up of high impact strength Polymer, to prevent
during carrying.
Comes with Galvanized Steel Wire Rope of diam 4.5 mm
breakage. Handle with special grip for a perfect comfort
with a snout for a better gripping of the retractable lanyard.
Internal braking mechanism to reduce the fall arrest forceless than 6kN.
Swivel and FA 50 101 17 at anchorage end, FA 50 203 11 at
indicator.
Minimum breaking strength:12 kN Tested and approved for horizontal use with the lanyard
attachment end. FA 50 203 11 connector with load
FA 40 30415
OLYMPE cable,retractablefall arrest 15or 20m
Casing made up of high impact strength Polymer, to prevent
carrying.
Comes with Galvanized Steel Wire Rope of diam 4.5 mm with a
breakage. Handle with special grip for a perfect comfort during
snout for a better gripping of the retractable lanyard.
Internal braking mechanism to reduce the fall arrest force lessthan 6kN.
Swivel and FA 50 101 17 at anchorage end, FA 50 203 11 atattachment end. FA 5020311 connector with load indicator.
Minimum breaking strength:12kN Tested and approved for horizontal use with the lanyard
FA 40 30415
OLYMPE cable,retractablefall arrest 25or 30m
Casing made up of high impact strength Polymer, to preventbreakage. Handle with special grip for a perfect comfort duringcarrying.
Comes with Galvanized Steel Wire Rope of diam 4.5 mm with a snoutfor a better gripping of the retractable lanyard.
Internal braking mechanism to reduce the fall arrest force less than6kN.
Swivel and FA 50 101 17 at anchorage end, FA 50 203 11attachment end. FA 5020311 connector with load indicator.
Minimum breaking strength:12kN Tested and approved for horizontal use with the lanyard FA 40 30415
Self Retracting LifelinesPolymer Casing With Galvanized Steel Wire Rope
BSB002 FA 20 400 10 Retractable fall arrester polymer casing 10 m galv anized steel
wire rope
BSB003 FA 20 400 15 Retractable fall arrester polymer casing 15 m galvanized steel
wire rope
BSB004 FA 20 400 20 Retractable fall arrester polymer casing 20 m galvanized steel
wire rope
BSB005 FA 20 400 25 Retractable fall arrester polymer casing 25 m galvanized steel
wire rope
BSB006 FA 20 400 30 Retractable fall arrester polymer casing 30 m galvanized steel
wire rope
Fall Indicator
OLYMPE cable,retractablefall arrest 6 or 10m
Casing made up of aluminium alloy. Comes with Galvanized Steel Wire Rope of diam 4.5 mm with
a snout for a better gripping of the retractable lanyard.
Internal braking mechanism to reduce the fall arrest forceless than 6kN.
Swivel and FA 50 101 17 at anchorage end, FA 50 203 11 atattachment end.FA 5020311connector with load indicator.
Minimum breaking strength:12kN Tested and approved for horizontal use with the lanyard
FA 40 30415
Fall IndicatorOLYMPE cable,retractablefall arrest 15m
Casing made up of aluminium alloy Comes with Galvanized Steel Wire Rope of diam 4.5 mm
with a snout for a better gripping of the retractable lanyard.
Internal braking mechanism to reduce the fall arrest forceless than 6kN.
Swivel and FA 50 101 17 at anchorage end, FA 50 203 11 atattachment end.FA 5020311connector with load indicator.
Minimum breaking strength:12kN Tested and approved for horizontal use with the lanyard
HORIZONTALUSE
The retractable fall arresters OLYMPE with polymer
casing and steel wire rope are approved for
horizontal use when it is used with a polyamide
lanyard connected to the cable self retracting lifeline.
Self Retracting LifelinesAluminium Casing With Galvanized Steel Wire Rope
BSB013 FA 20 600 06 Retractable fall arrester aluminium casing 6 m galvanized steel
wire rope
BSB014 FA 20 600 10 Retractable fall arrester aluminium casing 10 m galv anized
steel wire rope
BSB015 FA 20 600 15 Retractable fall arrester aluminium casing 15 m galv anized
steel wire rope
BSB007 FA 40 304 15 Lanyard for horizontal use of the retractable fall arresters
OLYMPE webbing,retractablefall arrest 2 m
Casing made up of aluminium alloy. Comes with a 25 mm polyester webbing. Internal braking mechanism to reduce the fall arrest
force less than 6kN.
Swivel and FA 50 101 17 at anchorage end, and 2 x FA5020755 at attachment end.
USE: To be used wherever the user needs a greater
secure permanently.
Minimum breaking strength:15kN
freedom of movement and pass obstacles remaining
OLYMPE webbing,retractablefall arrest 2 m
Casing made up of high impact strength Polymer, toprevent breakage.
Comes with a 25 mm polyester webbing . Internal braking mechanism to reduce the fall arrest
force less than 6kN.
Swivel and FA 50 101 17 at anchorage end FA 50 203
swivel and load indicator.
Minimum breaking strength:15kN
11at attachment end. FA 50 203 11 connector with
OLYMPE webbing,retractablefall arrest 3,5m
Casing made up of high impact strength Polymer, toprevent breakage .
Comes with a 25 mm polyester webbing . Internal braking mechanism to reduce the fall arrest
force less than 6kN.
Swivel and FA 50 101 17 at anchorage end FA 50 203
load indicator.
Minimum breaking strength:15kN
11 at attachment end. FA 50 203 11 connector with
Fall Indicator
Fall Indicator
Self Retracting LifelinesBSB016 FA 20 500 02 Twin retractable fall arrester aluminium casing 2 m webbing
lanyard
BSB018 FA 20 501 02 Retractable fall arrester polymer casing 2 m webbing lanyard
BSB010 FA 20 500 03 Retractable fall arrester polymer casing 3.5 m webbing lanyard
OLYMPE webbing,retractablefall arrest 6 m
Casing made up of high impact strength Polymer, toprevent breakage.
Comes with a 25 mm polyester webbing. Internal braking mechanism to reduce the fall arrest
force less than 6kN.
Swivel and FA 50 101 17 at anchorage end FA 50 203
load indicator.
Minimum breaking strength:15kN
11 at attachment end. FA 50 203 11 connector with
Fall Indicator
OLYMPE webbing,retractablefall arrest 12m
Casing made up of high impact strength Polymer, to prevent
during carrying.
Comes with a 25 mm polyester webbing. Internal braking mechanism to reduce the fall arrest force
breakage. Handle with special grip for a perfect comfort
less than 6kN.
Swivel and FA 50 101 17 at anchorage end, FA 50 203 11 atattachment end. FA 5020311 connector with load indicator.
Minimum breaking strength:15 kN Tested and approved for horizontal use with the lanyard
FA 40 304 15
Fall Indicat
Fall Indicator
Self Retracting LifelinesBSB029 FA 20 501 06 Retractable Fall Arrester with polymer casing and webbing
lanyard length 6 metres
BSB012 FA 20 500 12 Retractable fall arrester polymer casing 12 m webbing lanyard
Fall Indicator
Retractablefall arrest with a 50 mm webbing
Maximum length:2.50m Incorporate a protective casing , an Energy
Absorber (45 mm) .
Having a swivel arrangement at anchorage endwith load indicator.
Minimum breaking strength:15kN
Retractablefall arrest with a 50 mm webbing
Maximum length:2.50m Incorporates a protective casing , an Energy Absorber (45 Fall Indicator
mm) and a Steel Karabiner FA 50 202 17 for Harness endas attachment elements.
Having a swivel arrangement at anchorage end with loadindicator.
Minimum breaking strength:15kN Can be used in Factor 2 (maxi 1,80m).
FALL FACTOR 2
Can be used in configuration where
it is necessary to work above the
anchor point.
Self Retracting Lifelines
BSB008 FA 20 300 02 Retractable webbing fall arrester (2.5 m) with steel screw
karabiner
BSB009 FA 20 301 02 Retractable webbing fall arrester (2.5 m) with steel snap hook
BSB030 FA 20 303 02 Retractable webbing fall arrester (2.5 m) with 1 steel snap hook
and 1 steel scaffold hook
BSB019 FA 20 302 02 Retractable webbing fall arrester (2.5 m) with steel snap hook
for use in Factor 2
OLYMPE cable, retractable fall arrest 30m with rescuewinch
Casing made up of high impact strength Polymer, toprevent breakage.
Comes with Galvanized Steel Wire Rope of diam 4.5mm. Internal braking mechanism to reduce the fall arrest
force to less than 6kN.
Swivel and FA 50 101 17 at anchorage end, attachment end. connector with load indicator.
Integrated recovery system, the device can be adaptedonto our TRIPOD'EVO.
Minimum breaking strength:12kN
Self Retracting Lifelines
BSB025 FA 20 401 30 Polymer casing with galvanized steel wire rope 30 mtr with
rescue winch
TripodFor access in confined spaces
With two mounted pulleys at the head of the Tripod in the prolongation of the main leg for passing a cable
Having two auxiliary eye bolts as attachment points.
Aluminum alloy cast head, legs in aluminium.
Steel support-shoes provided with rubber sole to increase friction and impart more stability.
Strength of anchorage point greater than 10kN
Every Tripod is provided with inbuilt fixture for attaching our winch FA 60 003 00 (can be supplied without this fixture on special request).
Every Tripod is provided with Tripod Bag
Maximumloadcapacity:200kg
1.8m
Tripod Bag
To be used with a Retractable Fall
for raising or lowering a person.Arrester (EN360) when deployed
Rescueandwork winch
To be used for raising or lowering of personnel ormaterial into confined spaces.
Equipped with bolting fixture for robust fitting onto the tripod.
Nominal Lifting load capacity: 125kgs Length:20.0m Galvanized cable diam: 4,8mm Conforms to: Machinery Directive 2006/42/CEand
EN13157: 2004
Size
7 Ft. 10 Ft.
H 1.15-->2.15m 1.9-->2.9m
1.5m
Confined Space
BSC001 FA 60 001 00 Tripod - 7 ft
BSC002 FA 60 003 00 Winch - 20 metres wire rope
BSC003 FA 60 002 00 Trpod - 10 ft
652.1
Parapet AnchoragePoint
Designed to be used in locations where a low parapet wall can receive this anchor
Can be installed on parapets with dimensions from 60mm to 360mm
Minimum breaking strength:25 kN
Dooranchor
Designedto be installed on frames from 60 cmto 125cm
Can be used by 2 persons at the same time Every Door Anchor is provided with its special
bag
Minimum breaking strength:13kN
Tested for a use by 2 people
35
512
11
21
577.5
allution
Anchorages
Beam Anchor
Material: Aluminium & Brass Designedto be installed on beams from 70 mm to
150mm width, and 100 mm to 330 mm
width.
Minimum breaking (system) strength: 23 kN
Lg
SizeLg
100-->330mm
Sm
70-->150mm
BSN015 FA 60 010 00
BSN009 FA 60 015 00
BSN007 FA 60 008 00 Beam Anchor
BSN010 FA 60 008 01 Small Beam Anchor
Tested for a use by 2 people
Temporarylifeline
Secures an operator throughout his travels. Horizontal lifeline in polyester webbing Forked ends in order to:
Either anchor to a structure without the need to add anchorage sling,
Or hang directly on adapted anchorage point.
Steel ratchet to put the system into tension after adjusting the required
length.
Provided with an in dissociable bag for storing excess strap in use, thenkeep the system in his bag after use.
Adjustable length from 2 to 20 m
OR OR
f = 2 m (for L=20m)
f
L
Anchorages
BSN008 FA 60 007 00 Horizontal temporary anchorage lifeline
AnchorageWebbingSling
Material: Made up of 45 mm wide Polyester webbing Length:1.5 m Strength:Min 15kN
ConcreteAnchorStrap
Material: Polyester webbing 45mm and forged galvanized D-Ring.
Disposable webbing, designed to be installed on steelframe and concrete.
Minimum breaking strength:15kN
AnchorageSteel Wire RopeSling Designed for structure with sharp edges
Made of PVC coated8.0 mm G.IWire rope.
Having steel thimbles at both sides.
Strength: Min 15 kN
AnchorageWebbingSling
Made up of 20mm wide Polyester WebbingStrength: Min 10 kN
Kg Kg Kg
Anchorages
BSN001 FA 60 004 15 Anchorage Webbing Sling length 1.5 m BSN013 FA 60 013 00 Concrete Anchor Strap
BSN003 FA 60 005 10 Anchorage Round Sling 1 m
BSN004 FA 60 005 15 Anchorage Round Sling 1.5 m
BSN005 FA 60 006 10 Anchorage Steel Wire Rope Sling 1 m
BSN005 FA 60 006 10 Anchorage Steel Wire Rope Sling 1 m
BSN006 FA 60 006 20 Anchorage Steel Wire Rope Sling 2 m
Ref : BSK001 (FA 8000100)
Minimalist, but complete this set must
in restrained work.be used where there is no risk of a fall,
Ref : BSK002 (FA 8000200)
This set consists of our essential of our
working over 6 meter high.range and should be used when
Ref : BSK003 (FA 8000300)
This set consists of our essential of our
working over 6 meter high.range and should be used when
METAL CONSTRUCTION KIT
SCAFFOLDER KIT
BASKET, RESTRAINT KIT
Kits
Ref : BSK004 (FA 8000400)
Multi-use and very comfortable, thisset allows large vertical movements.
Ref : BSK005 (FA 8000500)
The indispensable when working with
hook/unhook frequently.movements which requires to
STEEL CONSTRUCTION KIT, CRANE BOOM
BUILDING KIT
Kits
Ref : BSK006 (FA 8000600)
C o m p l e t e , c o m f o r t a b l e a n d
work positioning function.multipurpose this set also includes a
Ref : BSK007 (FA 8000710)Ref : BSK008 (FA 80 007 20)
Essential when working on roofsthanks to the manual locked position.
Ref No Length
BSK007 10 mtr
BSK008 20 mtr
ROOF KIT
PYLON, TOWER KIT
Kits
Ref : BSK010 ( FA 8000800)
A complete and economical solutionfor low-level interventions.
INDUSTRIAL MAINTENANCE KIT
Kits
Ref : BSA008 (FA 90 00100)
Tools lanyard
Avoids a possible fall of the tools by attaching them to the user or to an anchor point.
The workers below are therefore safer! Stretch-lanyard, provided with a light-weight karabiner for
attachment to the user's belt/harness.
Maximum Weight: 7 kg
Ref : BSA001 (FA 10 90100)
Suspension TraumaRelief Strap
Extremely effective, specially designed to help relieve the negative effects of Suspension Trauma
Compact and Light-weight. Does not hamper the activityof worker while at work.
Allows the suspended worker to stand up in his harnessto relieve pressure.Easy to attach to the Harness with the help of the textile loop
andVelcro provided.Easy deployment, operation is fool-proof.
to provide a better comfort on a classic
harness with 45mm webbing)
Ref : BSA009 (FA 10 903 00)
Removable extension band withD-Ring
Lg 45 cm, To be fixed on the harness
the quick link.dorsal D-Ring by the intermediate of
Ref : BSA015 (FA 10 90500)
Removable abrasion resistant shoulderpad.
Specially designed for scaffolder to befriction tubes prematurely damage
theinstalled on the shoulder harness
Ref : BSA00007 (FA 1090200)
RemovableDorsal Pad
Foam with knitted mesh pad, designed
harness (can be fitted on all kind of
Accessories
BSA013 (FA 90 100 00)
BSA012 (FA 90 101 00)
Nylon bag to contain personal fall protection equipment.
Closure by hood, carrying handle. Dim: 33x47 cm
Back Pack Bag Multi-pockets In OxfordPolyester600x600d
3 Separated Compartments, Which OneWith 8 Pockets
Padded Back, Shoulder And Bottom, CarryingHandle.
Dim: 45X 36 X 18 Cm,Total Capacity: 26Litres
BSA011 (FA 90 103 00)
Storage bag in Oxford polyester600x600D
Rigid bottom in polyethylene,carrying handle.
Dim: 60x 19 x 26cm Total capacity: 29 litres
Accessories
Ref: BSP001 (FA 50 101 17)
Steel Screw-locking Karabiner
Ref: BSP002 (FA 50 102 17)
Steel Screw-locking Karabiner
: 23kN: 23kN
: 17mm: 18mm
10.0 10.0
56.5 56.5
Ref: BSP003 (FA 50 301 23)
Steel Triple-locking Karabiner
Ref: BSP004 (FA 50 202 17)
Steel Snap Hook
: 25kN : 25kN
: 23mm : 17mm
55.8 67.0
11.0
Ref: BSP005 (FA 50 203 11)
Steel Swivel Snap Hook with Load Indicator
Ref: BSP005 (FA 50 207 55)
Steel Scaffold Hook
: 25kN : 23kN
:11.5mm : 55mm
48.0
35.0 127.0
136.
015
9.5
111.
010
7.0
129.
0
214.
0
107.
0
Hooks & Karabiners
Ref: BSP007 (FA 50 213 80)
Steel Tower Hook
: 23kN159.0
11.5: 85mm
Ref: BSP023 (FA 50 215 50)
Steel Tower Hook
: 25kN138.8
14.0
: 50mm
Ref: BSP024 (FA 50 216 55)
Steel Tower Hook
: 25kN 134.0 14.0
: 55mm
234.
3
333.
0
210.
2
Hooks & Karabiners
Ref: BSP011 (FA 50 103 22)
Aluminium Screw-locking Karabiner
Ref: BSP020 (FA 50 105 22)
: 23kN: 23kN
:
22.5mm
: 22.5mm
69.0 69.0
11.0 11.0
Ref: BSO013 (FA 50 201 22)
Aluminium Quarter Turn-locking Karabiner
Ref: BSP020 (FA 50 217 22)
Aluminium Quarter Turn-locking Karabiner
: 23kN : 23kN
: 22mm : 22mm
67.5 67.5
11.0
Ref: BSP015 (FA 50 302 22)
Aluminium Triple action-locking Karabiner
Ref: BSP022 (FA 50 304 22)
Aluminium Triple action-locking Karabiner
: 23kN : 23kN
: 22mm : 22mm
67.5 67.5
1.0 1.0
110.
011
1.0
111.
0
110.
011
1.0
111.
0
11
Aluminium Screw-locking Karabiner
Hooks & Karabiners
Ref: BSP008 (FA 50 209
14)
Anchorage Hook
Ref: BSP009 (FA 50 210 11)
Anchorage Hook
Ref: BSP010 (FA 50 211 75)
Anchorage Hook
330.
035
0.0
380.
0
35.
03
5.0
35.
075mm23kN
110mm23kN
140mm23kN
Hooks & Karabiners
w | www. bettersafeinternational.com
UK
Riverside
Mountbatten Way
CongletonCheshire
CW12 1DY
United Kingdom
t | + 44 (0) 1260 217 437
NETHERLANDS
Azewijnseweg 12 SF
4214 KC Vuren
The Netherlands
t | + 31(0) 183 820 280