Keep ceiling height right where it is! Specifi cally designed to work with surface-mounted conduit and junction boxes, BeveLED BLOCK has a modern
look that’s perfect for lofts, offi ces, and open architectural spaces. Also available with solid-sides styling shown above, Block also creates a fi nished look when
recessed conduit is possible.
FEATURES
• High performance architectural lighting solution for industrial or exposed concrete ceiling types where recessed lighting is not an option
• Convenient conduit cutouts provide access for surface-mounted conduit to pass through the luminaire
• Smooth, modular solid and keyhole slots are interchangeable and user confi gurable to allow for simple on site customization in the fi eld.
• BeveLED BLOCK is available in a range of standard and custom colors to complement your project, whether an industrial or refi ned look is desired.
• Industry leading illumination and craftsmanship
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 8,581,520, 8,456,109, 10,443,822,
D857,289 and D864,468. Patents pending. USAI, BeveLED BLOCK, Classic White and Warm Glow
are registered trademarks of USAI, LLC. Revised 06/21/2021
SURFACE MOUNT CONDUIT CUT OUT
usailighting.com/block
Page 1
BeveLED Block® Surface - BLSD5Square Downlight
BEVELED BLOCK DOWNLIGHT PERFORMANCE DATA
Warm Glow Dimming
LED COLOR CHOICES
9W 12W 16W 24W 16W
Coloring Rendering Index: 80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+
Source Lumens: 1150 900 1300 1025 1725 1350 2400 1875 1275 1025
Lumens Per Watt: 100 74 93 73 93 72 86 67 69 55
Delivered Lumens: 850 675 1125 875 1475 1150 2050 1600 1100 875
*Performance based on 3000K. See IES fi les for exact values at usailighting.com.
DELIVERED*PERFORMANCE:
Classic White
Classic White Warm Glow Dimming
2700K 3000K 3500K 4000K 2700K 3000K
Coloring Rendering Index: 80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+
Multiplier for Lumen Output: 0.94 0.78 1.00 0.78 1.00 1.00 1.06 1.06 0.94 0.79 1.00 0.81
CORRELATED COLOR TEMPERTURE
CONFIGURABLE SPEC SHEETS COMING SOON
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
HOW TO SPECIFY
BeveLEDBlockDownlight
BLSD5BeveLEDBLOCK5” SquareDownlight
LED ColorTemperatureOptions
27KS2700K, 80+ CRI27KH2700K, 90+ CRI30KS 3000K, 80+ CRI30KH3000K, 90+ CRI35KS 3500K, 80+ CR35KH3500K, 90+ CRI40KS 4000K, 80+ CR40KH4000K, 90+ CRI
2722KS 2700K-2200K, 80+ CRI2722KH 2700K-2200K,90+ CRI3022KS 3000K-2200K,80+ CRI3022KH 3000K-2200K,
BeamOptions
2525° beam5050° beam9090° beam
LensOptions
S Solite(providedstandard)
BFBorosilicateFrosted
SFSoliteFrosted
Body FinishOptions
WHWhiteBZBronzeBLBlack
GRGreySCConduit SilverRALCustom Color (specify RAL #)
WattageOptions
09C39W LED12C312W LED16C316W LED24C324W LED
16WG216W LED
VoltageOptions
UNV120V-277V
120V
UNV120V-277V
120V
MountingOptions
CCConduit cutout for surface mounted 4”octagonal junction boxSJSurface mounted tosurface mounted 4” octagonal junction box
RBSurface mounted to recessed mounted 4”octagonal junction box
Dimming DriverOptions
For use with UniversalVoltage 120V - 277V
D2 0-10V dim, 10% (provided standard)
For use with 120V only
D19 Phase dimming 1%, 120V only (1, 3)
For use with UniversalVoltage 120V - 277V
D2 0-10V dim, 10% (provided standard)D4A Lutron ECO, 0.1% (2, 3, 4)D4H Lutron H ECO, 1% Fade (1, 2, 3)D4P Lutron ECO, 1% (2, 4)D6A EldoLED 0-10V, 0.1% (2)D6B EldoLED 0-10V, 0.1% (2)D6E EldoLED 0-10V, 1% (2)D6F EldoLED 0-10V, 1% (2)D7 EldoLED DALI, 0.1% (2)
For use with 120V only
D3 Lutron Hi-Lume 1% 2-wire, 120V only (2)D19 Phase dimming 1%, 120V only (1, 3)
1 Not available with 9W2 For use with RB mounting only3 Not available for Warm Glow4 Not available with 24W
BLSD5
FAMILY LED COLOR CHOICES FIXTURE
Warm Glow Dimming
3030° beam5050° beam9090° beam
Page 2
For use with CC and SJ Mounting
For use with RB Mounting Only
BeveLED Block® Surface - BLSD5Square Downlight with Integral Driver
Classic White
FINISH OPTIONS
Bronze (BZ) Black (BL) Conduit Silver (SC)White (WH) Grey (GR)
Custom colors also available
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 8,581,520, 8,456,109, 10,443,822,
D857,289 and D864,468. Patents pending. USAI, BeveLED BLOCK, Classic White and Warm Glow
are registered trademarks of USAI, LLC. Revised 06/21/2021
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
HOW TO SPECIFY
BeveLEDBlockDownlight
BLSD5BeveLEDBLOCK5” SquareDownlight
LED ColorTemperatureOptions
27KS2700K, 80+ CRI27KH2700K, 90+ CRI30KS 3000K, 80+ CRI30KH3000K, 90+ CRI35KS 3500K, 80+ CR35KH3500K, 90+ CRI40KS 4000K, 80+ CR40KH4000K, 90+ CRI
2722KS 2700K-2200K, 80+ CRI2722KH 2700K-2200K,90+ CRI3022KS 3000K-2200K,80+ CRI3022KH 3000K-2200K,90+ CRI
BeamOptions
2525° beam5050° beam9090° beam
LensOptions
S Solite(providedstandard)
BFBorosilicateFrosted
SFSoliteFrosted
Body FinishOptions
WHWhiteBZBronzeBLBlack
GRGreySCConduit SilverRALCustom Color (specify RAL #)
WattageOptions
09C39W LED12C312W LED16C316W LED24C324W LED
16WG216W LED
MountingOptions
CCConduit cutout for surface mounted 4”octagonal junction boxSJSurface mounted tosurface mounted 4” octagonal junction box
RBSurface mounted to recessed mounted 4”octagonal junction box
BLSD5
FAMILY LED COLOR CHOICES FIXTURE
Warm Glow Dimming
3030° beam5050° beam9090° beam
Page 3
BeveLED Block® Surface - BLSD5Square Downlight with Remote Driver
RM
RemotePowerSupplyRM Remote PowerSupply(Specify in table below)
USAI Power Supply
Must Be Specifi ed
RPC-01
Remote Power SupplyRPC-01BeveLED Block Remote PowerSupply
WattageOptions
09C39W LED12C3 12W LED16C316W LED24C3 24W LED
Remote Dimming Typeand Level
D4A Lutron ECO, 0.1% (2, 3)D4H Lutron H ECO, 1% Fade (1, 2)D4P Lutron ECO, 1% (3)D6A EldoLED 0-10V, 0.1%D6B EldoLED 0-10V, 0.1%D6E EldoLED 0-10V, 1%D6F EldoLED 0-10V, 1%D7 EldoLED DALI, 0.1%D28 EldoLED DMX, 0.1%D3 Lutron 2-wire, 1%D19 Hatch Phase 2-wire, 1% (1, 2)
Remote EmergencyOptionEM5EM battery requiresremote enclosureby others, minimum size11” L x 6.75” Wx 3.25” H
Voltage
UNV 120V - 277V
120V 120V Only
2. Specify Remote Power Supply
16WG2 16W LED
Classic White
Warm Glow
1 Not available for 9W 2 Not available for Warm Glow 3 Not available for 24W
Classic White
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 8,581,520, 8,456,109, 10,443,822,
D857,289 and D864,468. Patents pending. USAI, BeveLED BLOCK, Classic White and Warm Glow
are registered trademarks of USAI, LLC. Revised 06/21/2021
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
HOW TO SPECIFY
Page 4
BeveLED Block® Surface - BLSD5Square Downlight
CONDUIT CUTOUT KEYSEach conduit cutout mounting option (CC style) is provided with three conduit cutout keys (KAS-CC-xx) and three solid cover keys (KAS-VK-xx) in the fi xture fi nish specifi ed. For more keys, or for extended length keys, please use the ordering table below.
KEY ACCESSORIES
4”OCTAGONAL JUNCTION BOX DETAIL
4"Ø X 1-1/2" DEEP OCTAGON J-BOX
(BY OTHERS)
1-1/2”3-1/2”
3-1/2”
FixtureFamily
KASKey Accessory Square
Key Accessory
CC*Conduit Cutout KeyXCConduit Cutout Key,Extended LengthVK*Solid Cover Key
*3 provided with each conduit cutout canopy
Finish
WH WhiteSC Conduit SilverGR GreyBLBlackBZ Bronze RAL Custom Color
SQUARE CONDUIT CUTOUT KEY(STANDARD)
KAS-CC
SQUARE CONDUIT CUTOUT KEYEXTENDED DEPTH
KAS-XC
SQUARE SOLID COVER KEY(STANDARD)
KAS-VK
KEY ACCESSORY ORDERING INFORMATION
Conduit End Straight Conduit L Conduit T Conduit
CONDUIT CUTOUT MOUNTING EXAMPLE
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 8,581,520, 8,456,109, 10,443,822,
D857,289 and D864,468. Patents pending. USAI, BeveLED BLOCK, Classic White and Warm Glow
are registered trademarks of USAI, LLC. Revised 06/21/2021
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
Page 5
BeveLED Block® Surface - BLSD5Square Downlight
61⁄8"
53⁄16"
33⁄16"
45⁄8"
53⁄16"
23⁄4"
37⁄8"
611⁄16"
115⁄16"
1/2” or 3/4”conduit (by others)
Ceiling (by others)
CC - CONDUIT CUTOUT MOUNTED
23⁄4"
37⁄8"
611⁄16"
53⁄16"
53⁄16"
23⁄4"
37⁄8"
611⁄16"
SJ - Surface mount to surface mounted 4”octagonal j-boxRB - Surface mount to recessed mounted 4”octagonal j-box
JunctionBox (1-1/2”deep, 4”ØOctagon boxby others)
SJ - Surface mount to surface mounted 4”octagonal j-box
JunctionBox (4ӯOctagon boxby others)
RB - Surface mount to recessed mounted 4”octagonal j-box
4”octagonal junction box(by others)
solid cover key conduit cutoutkey
See drawing above for junction-box (by others) details.
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 8,581,520, 8,456,109, 10,443,822,
D857,289 and D864,468. Patents pending. USAI, BeveLED BLOCK, Classic White and Warm Glow
are registered trademarks of USAI, LLC. Revised 06/21/2021
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
HOW TO SPECIFY
FIELD REPLACEABLE LED LIGHT ENGINEis serviceable without tools. All USAI Lighting Classic White and Warm Glow Dimming light engines feature industry-leading color consistency
FIELD REPLACEABLE DRIVER 0-10V, 100%-10% solid state electronic constant current D2 dimming driver with a high power factor provided standard and sources 2mA. Other dimming drivers optionally available. D6 dimming drivers source 2mA. Driver complies with IEEE C62.41 surge protection. Some on-time delay may be experienced depending on control system used.
REMOTE LOCATION DRIVERIf a remote dimming driver is required, specify “RM” in the fi xture part number and proceed to the RP table to complete the dimming driver specifi cation. All remote power supplies must be clearly specifi ed in the “RP” table, with one remote power supply required per fi xture. Remote power supplies require enclosures by others that meet local codes and must be located in an accessible service panel within 100ft of the light fi xture; see table below for coordination of enclosure sizes. All dimming drivers comply with IEEE C62.41 surge protection.
REMOTE LOCATION EMERGENCY Remote emergency battery IOTA ILB-CP05 provides 5W to one fi xture for 90 minutes. Remote power supplies with EM option require an enclosure by others with minimum size of 11”L x 6.75”W x 3.25”H that meets local codes. Emergency battery remote power supplies cannot be located any more than 50 feet from light fi xture.
BEVELED BLOCK SPECIFICATIONS
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 8,581,520, 8,456,109, 10,443,822,
D857,289 and D864,468. Patents pending. USAI, BeveLED BLOCK, Classic White and Warm Glow
are registered trademarks of USAI, LLC. Revised 06/21/2021
Page 6
BeveLED Block® Surface - BLSD5Square Downlight
Remote Power Supply Dimming Option Wire Gauge Required* RP Only RP with EM Option** UNV-D4A Lutron ECO, 0.1% (2, 3)
UNV-D4H Lutron H ECO, 1% fade (1, 2) 14/12
UNV-D4P Lutron ECO, 1% (3)
UNV-D6A EldoLED 0-10V, 0.1% 6.25” L x 4” W x 2” H
UNV-D6B EldoLED 0-10V, 0.1%
UNV-D6E EldoLED 0-10V, 1% 18/16 11” L x 6.75” W x 3.25” H
UNV-D6F EldoLED 0-10V, 1%
UNV-D7 EldoLED DALI, 0%
UNV-D18 Moon’s DMX 0.1% (2) 18/16 9” L x 4” W x 2” H
120V-D3 Lutron 2-wire phase, 1% 14/12 6.25” L x 4” W x 2” H
120V-D19 Hatch 2-wire phase, 1% (1, 2) 14/12 5.75” L X 2.625” W X 2” H
1 Not available for 9W 2 Not available for Warm Glow 3 Not available with 24W
Minimum Enclosure Size Required (by others)
RPC-01-09C3 RPC-01-12C3 RPC-01-16C3 RPC-01-24C3RPC-01-16WG2
* Wire gauge 14/12 = Maximum distance from light fi xture to remote power supply is 100’ using 12 gauge wire, 50’ using 14 gauge wire. * Wire gauge 18/16 = Maximum distance from light fi xture to remote power supply is 100’ using 16 gauge wire, 50’ using 18 gauge wire. ** Emergency battery remote power supplies cannot be located any more than 50 feet from light fi xture.
RPRP2REMOTEREMOTEPOWEPOWERSUPPLYSUPPLY
-
A
+
INPUT WIREINPUT WIRES
-+
USE FOR WIRING FIXTURESUSE FOR WIRING FIXTURESMDF0MDF02M2M DP02DP02MDF0MDF04M4M DP04DP04MDF0MDF06M6M DP06DP06MDF0MDF08M8M DP08DP08
FIXTURFIXTURE
SEE DIMMING COMPSEE DIMMING COMPATIBILITATIBILITYSHEET FOR SHEET FOR DETAILDETAILSSEE DIMMING
COMPATIBILTY SHEETS
FOR DETAILS
HOMERUN WIRING REQUIRED
RPCREMOTEPOWERSUPPLY
BEVELED BLOCK REMOTE POWER SUPPLY REQUIREMENTS AND WIRING DIAGRAM
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
HOW TO SPECIFY
FIXTURE WEIGHT BeveLED Block weighs 5 lbs
BODY 5-13/16” x 5-13/16” square die cast aluminum body available in a variety of powder coated paint fi nishes. Custom colors also available (provide RAL #).
MOUNTINGCC: Conduit cutout mounting fi xtures are designed to mount to surface-mounted 4”octagonal junction boxes with surface-mounted conduit connections. CC housings have 4 keyslots, one in each side, and ship with one conduit cutout key and three solid cover keys installed in the housing. 2 additional conduit cutout keys are shipped with the fi xture, and the different key types are interchangeable in the fi eld. Please see installation instructions for drawings and more details. RB: Recessed ceiling 4” octagonal junction box mounting fi xtures are designed to mount to a ceiling retaining a recessed 4”octagonal junction box. The sides are solid and have no cutouts, please see drawings and installation instructions for more details. SJ: Surface mounted 4” octagonal junction box mounting fi xtures are designed to mount to a surface-mounted junction box that has electrical supply coming from the plenum (no surface-mounted conduit). The sides are solid and have no cutouts, please see drawings and installation instructions for more details
WARRANTYBased on IESNA LM80-2008, BeveLED Block has a 50,000 hour rated life at 70% lumen maintenance (L70). USAI Lighting Warranty covers replacement parts for 5 years from date of shipment.
LISTINGS Dry/Damp/Wet for RB and SJ mounting. CC mounting style is dry/damp only. NRTL/CSA-US tested to UL standards. IBEW union made.
NOTES• Ambient temperatures at fi xture location should not exceed 40°C during normal operation.• Consult factory for video capture applications.
PHOTOMETRICS Consult factory or website for IES fi les. Tested in accordance with IESNA LM79. www.usailighting.com/block
BEVELED BLOCK SPECIFICATIONS
Page 7
BeveLED Block® Surface - BLSD5Square Downlight
© 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 8,581,520, 8,456,109, 10,443,822,
D857,289 and D864,468. Patents pending. USAI, BeveLED BLOCK, Classic White and Warm Glow
are registered trademarks of USAI, LLC. Revised 06/21/2021
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
V+ RED
V- BLACK
DIMMING DRIVER WIRING SCHEMES:
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE
D2 / DIML2
1126 River RoadNew Windsor, NY 12553
© 2016. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-2 Revised 03/22/2017
T 845–565–8500F 845–561–1130USAI
®
Lighting
D2 / DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%)
LED0-10V (-)
0-10V (+)
SWITCHED HOT
NEUTRAL
USAI®
Lighting
D2 / DIML2 0-10V DIMMING W/RELAY TO SWITCH POWER
D2 / DIML2 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V / 277V Crestron iLux dimmer expansion module CLS-EXP-DIMFLV 100% - 10% Crestron DIN Rail dimmer DIN-4DIMFLV4 100% - 10% Crestron DIN Rail analog output module DIN-A08 100% - 10% Crestron 8 Channel dimmer module GLX-DIMFLV8 100% - 10% Crestron 8 Channel dimmer module GLXP-DIMFLV8 100% - 10% Leviton IllumaTech dimmer IP710-DLX 100% - 10% Lightolier (Philips) Vega V2000FAMU 100% - 10% Lutron Diva DVTV-XX 100% - 10%
Use source current per fi xture specifi cation sheet to determine number of fi xtures per dimmer. Max number of fi xtures is limited by dimmer load rating.
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIMMER: 0-10V (BY OTHERS)
GRAY
PURPLE
BLACK
WHITE
GREEN
GND
V+ RED
V- BLACK
FIXTURE
DRIVER
LINE
NEUTRAL
CLASS 2 CONTROL WIRES
RELAY (BY OTHERS)
LED0-10V (-)
0-10V (+)
SWITCHED HOT
NEUTRAL
D2 / DIML2 0-10V DIMMING (NO RELAY)
DIMMER: 0-10V w/POWER SWITCHING
(BY OTHERS)
GRAY
PURPLE
BLACK
WHITE
GREEN
GND
FIXTURE
DRIVER
NEUTRAL
LINE
GROUND
NOTE:If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wirestogether.
NOTE:If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wirestogether.
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fi xture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specifi c dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference. 2. Only qualifi ed electricians in accordance to local codes should install these fi xtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
DIMMING DRIVER WIRING SCHEMES:
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE
D3 / DIML3
1126 River RoadNew Windsor, NY 12553
© 2016. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-3 Revised 03/22/2017
T 845–565–8500F 845–561–1130USAI
®
Lighting
D3 / DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V
USAI®
Lighting
D3 / DIML3 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Dimmer* Manufacturer Product Part Number Output Range Fixture Wattage 120V Only 39W and Less 40W - 80W ETC Sensor+ Cabinet ELV10 100% - 1% 1 – 26 1 – 13 ETC Unison DRd Cabinet ELV10 100% - 1% 1 – 26 1 – 13 Lutron Maestro Wireless® 600W dimmer MRF2-6ND-120- 100% - 1% 1 – 8 1 – 4 Lutron Maestro Wireless® 1000W dimmer MRF2-10ND-120- 100% - 1% 1 – 13 1 – 6 Lutron HomeWorks® QS adaptive dimmer HQRD-6NA- 100% - 1% 1 – 8 1 – 4 Lutron HomeWorks® QS 600W dimmer HQRD-6ND- 100% - 1% 1 – 8 1 – 4 Lutron HomeWorks® QS 1000 W dimmer HQRD-10ND- 100% - 1% 1 – 13 1 – 6 Lutron Caseta Wireless® Pro 1000W dimmer PD-10NXD- 100% - 1% 1 – 13 1 – 6 Lutron Stanza® dimmer SZ-6ND- 100% - 1% 1 – 8 1 – 4 Lutron RadioRA® 2 adaptive dimmer RRD-6NA- 100% - 1% 1 – 8 1 – 4 Lutron RadioRA® 2 1000 W dimmer RRD-10ND- 100% - 1% 1 – 6 1 – 3 Lutron myRoom DIN power module MQSE-4A1-D 100% - 1% 1 – 6 1 – 3 Lutron HomeWorks® QS wallbox power module HQRJ-WPM-6D-120- 100% - 1% 1 – 26 1 – 13 Lutron Homeworks® DIN power module LQSE-4A1-D 100% - 1% 1 – 6 1 – 3 Lutron HomeWorks® wallbox power module HWI-WPM-6D-120 100% - 1% 1 – 26 1 – 13 Lutron GRAFIK Eye® QS control unit QSGR-, QSGRJ- 100% - 1% 1 – 26 1 – 13 Lutron GRAFIK Eye® 3000 control unit GRX-3100-, GRX-3500- 100% - 1% 1 – 26 1 – 13 Lutron RPM-4U module HW-RPM-4U-120, LP-RPM-4U-120 100% - 1% 1 – 26 1 – 13 Lutron RPM-4A module HW-RPM-4A-120, LP-RPM-4A-120 100% - 1% 1 – 26 1 – 13 Lutron GP dimming panels Various 100% - 1% 1 – 26 1 – 13 Lutron Ariadni CL 250W dimmer AYCL-253P- 100%-1% 1 – 8 1 – 4 Lutron Diva CL 250W dimmer DVCL-253P-, DVSCCL-253P- 100%-1% 1 – 8 1 – 4 Lutron Grafi k T CL or RF CL dimmer GT-250M-, GTJ-250M- 100%-1% 1 – 8 1 – 4 Lutron Nova T CL 250W dimmer NTCL-250- 100%-1% 1 – 10 1 – 5
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
LED
SWITCHED HOT
NEUTRAL
D3 / DIML3 2 WIRE PHASE DIMMING
DIMMER: 2 WIRE PHASE(BY OTHERS)
BLACK
WHITE
GREEN
GND
V+ RED
V- BLACK
FIXTURE
DRIVER
NEUTRAL
LINE
GROUND
ONLY FOR SWITCHES WITH NEUTRAL
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fi xture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specifi c dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS1. Keep these instructions in a safe place for future reference. 2. Only qualifi ed electricians in accordance to local codes should install these fi xtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
1126 River RoadNew Windsor, NY 12553
© 2016. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-4 Revised 03/22/2017
T 845–565–8500F 845–561–1130USAI
®
Lighting
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE
D4 / DIML4
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
D4 / DIML4 3-Wire Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V Only 39W and Less 40W - 80W ETC Sensor+ Cabinet D20 Dimming module 100% - 1% 1–53 1–26 ETC Unison DRd Cabinet D20F Dimming module 100% - 1% 1–53 1–26 Lutron Nova T NTF-10- 100%–1% 1–41 1 – 20 Lutron Nova T NTF-103P- 100%–1% 1–20 1 – 10 Lutron Nova NF-10- 100%–1% 1–41 1 – 20 Lutron Nova NF-103P- 100%–1% 1–20 1 – 10 Lutron Vareo VF-10- 100%–1% 1–20 1 – 10 Lutron Skylark SF-10P-, SF-103P- 100%–1% 1–20 1 – 10 Lutron Diva DVF-103P-, DVSCF-103P- 100%–1% 1–20 1 – 10 Lutron Ariadni AYF-103P- 100%–1% 1–20 1 – 10 Lutron Vierti VTF-6A- 100%–1% 1–15 1 – 7 Lutron Maestro MAF-6AM-, MSCF-6AM- 100%–1% 1–15 1 – 7 Lutron Maestro Wireless MRF2-F6AN-DV- 100%–1% 1–15 1 – 7 Lutron RadioRA 2 RRD-F6AN-DV- 100%–1% 1–15 1 – 7 Lutron HomeWorks QS HQRD-F6AN-DV 100%–1% 1–15 1 – 7 Lutron Interfaces PHPM-3F-120, PHPM-3F-DV 100%–1% 1–41 1 – 20 Lutron GP Dimming Panels Various 100%–1% 1–41 1 – 20 277V Only 40W and Less 41W - 80W ETC Sensor+ Cabinet D20 Dimming module 100% - 1% 1–53 1–26 ETC Unison DRd Cabinet D20F Dimming module 100% - 1% 1–53 1–26 Lutron Nova T NTF-10-277- 100%–1% 1–44 1 – 22 Lutron Nova T NTF-103P-277- 100%–1% 1–33 1 – 16 Lutron Nova NF-10-277- 100%–1% 1–44 1 – 22 Lutron Nova NF-103P-277- 100%–1% 1–33 1 – 16 Lutron Skylark SF-12P-277-, SF-12P-277-3 100%–1% 1–33 1 – 16 Lutron Diva DVF-103P-277-, DVSCF-103P-277- 100%–1% 1–33 1 – 16 Lutron Ariadni AYF-103P-277- 100%–1% 1–44 1 – 22 Lutron Vierti VTF-6A- 100%–1% 1–33 1 – 16 Lutron Maestro MAF-6AM-277-, MSCF-6AM-277- 100%–1% 1–20 1 – 10 Lutron Maestro Wireless MRF2-F6AN-DV- 100%–1% 1–33 1 – 16 Lutron RadioRA 2 RRD-F6AN-DV- 100%–1% 1–33 1 – 16 Lutron HomeWorks QS HQRD-F6AN-DV 100%–1% 1–33 1 – 16 Lutron Interfaces PHPM-3F-DV 100%–1% 1–88 1 – 44 Lutron GP Dimming Panels Various 100%–1% 1–88 1 – 44
* NOTE: Number of fi xtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIMMING DRIVER WIRING SCHEMES:
USAI®
Lighting
DIML4 wiring diagrams continued on next page
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fi xture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specifi c dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS1. Keep these instructions in a safe place for future reference. 2. Only qualifi ed electricians in accordance to local codes should install these fi xtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
1126 River RoadNew Windsor, NY 12553
© 2016. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-4 Revised 03/22/2017
T 845–565–8500F 845–561–1130USAI
®
Lighting
DIMMING DRIVER COMPATIBILITY SELECTION GUIDED4 / DIML4 Continued
DIMMING DRIVER WIRING SCHEMES:
USAI®
Lighting
D4 / DIML4 EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 100%–1% 1–32 1 – 16 Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 100%–1% 1–64 1 – 32 Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 100%–1% 1–64 1 – 32 Lutron Quantum Various 100%–1% 1–64 1 – 32
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with EcoSystem Control / LED Dimming Driver Wiring (Dims down to
* NOTE: Number of fi xtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
LED
D4 / DIML4 EcoSystem CONTROLS
PURPLE GRAYPURPLEORANGEBLACKWHITEGREEN
GND
V+ RED
V- BLACK
FIXTURE
DRIVER
WALL CONTROL(BY OTHERS)
LINENEUTRAL
E2
E1
E1
ECOSYS BUS
CAP UN-USED ORANGE
WIRE
E2
DIMMER: 3 WIRE PHASE(BY OTHERS)
LED
D4 / DIML4 3 WIRE PHASE DIMMING
PURPLE GRAYPURPLEORANGEBLACKWHITEGREEN
GND
V+ RED
V- BLACK
FIXTURE
DRIVER
NEUTRAL
LINE
GROUND
DIMMED HOTSWITCHED HOTNEUTRAL
CAP UNUSED ECOSYS WIRES
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fi xture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specifi c dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS1. Keep these instructions in a safe place for future reference. 2. Only qualifi ed electricians in accordance to local codes should install these fi xtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
1126 River RoadNew Windsor, NY 12553
© 2016. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-4H Revised 04/09/2021
T 845–565–8500F 845–561–1130USAI
®
Lighting
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE
D4H /DIML4HDIMMING DRIVER WIRING SCHEMES:
USAI®
Lighting
LED
D4H / DIML 4H EcoSystem CONTROLS
PURPLE GRAY
PURPLE
BLACK
WHITE
GREEN
GND
V+ RED
V- BLACK
FIXTURE
DRIVER
WALL CONTROL(BY OTHERS)
LINE
NEUTRAL
E2
E1
E1
ECOSYS BUS
E2
D4H / DIML4H EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 100%–1% 1–32 1 – 16 Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 100%–1% 1–64 1 – 32 Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 100%–1% 1–64 1 – 32 Lutron Quantum Various 100%–1% 1–64 1 – 32
D4H / DIML4H LED: Lutron H Series EcoSystem LED Driver with Fade to Black (dims down to 1%)
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
© 2016. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-6 Revised 08/16/2019
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE
D6A / DIML6A and D6E / DIML6ED6B / DIML6B and D6F / DIML6F
DIMMING DRIVER WIRING SCHEMES:
USAI®
LightingIMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
LED0-10V (-)
0-10V (+)
SWITCHED HOT
NEUTRAL
D6 / DIML60-10V DIMMING W/RELAY TO SWITCH POWER
DIMMER: 0-10V
GRAY
PURPLE
BLACK
WHITE
GREEN
GND
FIXTURE
DRIVER
LINE
NEUTRAL
CLASS 2 CONTROL WIRES
RELAY (BY OTHERS)
DIML6A, 6B 0-10V DIMMING (NO RELAY)
DIMMER: 0-10V w/POWER SWITCHING
(BY OTHERS)
FIXTURE
V+ RED
V- BLACK
USAI®
Lighting
1126 River RoadNew Windsor, NY 12553
V+ RED
V- BLACK
LED0-10V (-)
0-10V (+)
SWITCHED HOT
NEUTRAL
D6 / DIML60-10V DIMMING (NO RELAY)
DIMMER: 0-10V w/POWER SWITCHING
(BY OTHERS)
GRAY
PURPLE
BLACK
WHITE
GREEN
GND
FIXTURE
DRIVERLINE
GROUND
D6A / DIML6A and D6E / DIML6E LED Dimming Compatibility TableD6A / DIML6A and D6E / DIML6E are linearly programmed dimming drivers for use with the dimming controls listed in the table below.D6A / DIML6A = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1%D6E / DIML6E = EldoLED ECOdrive 0-10V control dims from 100% to 1%
T 845–565–8500F 845–561–1130
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6A 6E Lutron Diva DVTV/NFTV with PP-20 99% - 0.1% 1% Lutron Nova T NTFTV with PP-20 99% - 0.1% 1% Lutron Energi Savr Node QSN-4T16-S 100% - 0.1% 1% Lutron GP Dimming Panels TVM2 Module 99% - 0.1% 1% Lutron Interfaces GRX-TVI w/ GRX3503 100% - 0.1% 1% Sensor Switch nIO nIO EZ 100% - 0.1% 1% enlighted Control Unit CU-3E-1R 100% - 0.1% 1%
Refer to manufacturer's dimmer load rating for maximum and minimum fixture quantities per dimmer.Enlighted compatible.
D6A / DIML6A and D6E / DIML6E Dimmer Compatibility Chart
D6B / DIML6B and D6F / DIML6F LED Dimming Compatibility TableD6B / DIML6B and D6F / DIML6F are logarithmic-programmed dimming drivers for use with the dimming controls listed in the table below.D6B / DIML6B = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1% D6F / DIML6F = EldoLED ECOdrive 0-10V control dims from 100% to 1%
D6B / DIML6B and D6F / DIML6F Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6B 6F Bush-Jaeger Electronic potentiometer 2112U-101 100% - 0.1% 1% Jung Electronic potentiometer 240-10 100% - 0.1% 1% Leviton Iluma Tech dimmer IP710-DLX 100% - 0.1% 1% Lightolier (Philips) Momentum (120V ONLY) ZP600FAM120 100% - 0.1% 1% Merten Electronic potentiometer 5729 100% - 0.1% 1% Pass & Seymour Titan CD4FB-W 100% - 0.1% 1% Watt Stopper Miro DCLV1 100% - 0.1% 1% Synergy Wallbox Dimmers ISD BC 100% - 0.1% 1% ABB i-bus SD/S 2.16.1 100% - 0.1% 1% Crestron Modules GLX-DIMFLV8, GLXP-DIMFLV8 100% - 0.1% 1% Crestron Green Light GLPAC-DIMFLV4-, GLPAC-DIMFLV8- 100% - 0.1% 1% Crestron Green Light Power Pack GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM, GLPP-1DIMFLV3EX-PM 100% - 0.1% 1% Crestron DIN Rail Analog Output Module DIN-A08 100% - 0.1% 1% Crestron DIN Rail 0-10V Fluorescent Dimmer DIN-4DIMFLV4 100% - 0.1% 1% Crestron iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV 100% - 0.1% 1% enlighted Control Unit CU-3E-1R 100% - 0.1% 1%
Refer to manufacturer's dimmer load rating for maximum and minimum fixture quantities per dimmer.Enlighted compatible.
1126 River RoadNew Windsor, NY 12553
© 2016. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-7 Revised 08/14/2017
T 845–565–8500F 845–561–1130USAI
®
Lighting
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE
D7 / DIML7 and D7EDIMMING DRIVER WIRING SCHEMES:
USAI®
Lighting
D7 / DIML7 and D7E Dimming Driver WiringD7 / DIML7 and D7E are linearly programmed dimming drivers. D7 / DIML7 = EldoLED SOLOdrive DALI control dims from 100% to 0.1%D7E = EldoLED ECOdrive DALI control dims from 100% to 1%
LED
D7 / DIML7 / D7EDALI CONTROLS
V+ RED
V- BLACK
FIXTURE
DRIVER
DALI BUS
WALL CONTROL(BY OTHERS)
LINENEUTRAL
DA
DA
ORANGE (-)ORANGE/WHITE (+)
BLACK WHITE GREEN
GND
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fi xture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specifi c dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS1. Keep these instructions in a safe place for future reference. 2. Only qualifi ed electricians in accordance to local codes should install these fi xtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
D19 / DIML19 LED: Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver. Dims down to 1% contingent upon dimmer specifi cation and load. 120V only.
1126 River RoadNew Windsor, NY 12553
© 2016. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-19 Revised 03/26/2021
T 845–565–8500F 845–561–1130USAI
®
Lighting
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE
D19 / DIML19DIMMING DRIVER WIRING SCHEMES:
USAI®
Lighting
LED
SWITCHED HOT
NEUTRAL
D19 / DIML192 WIRE PHASE DIMMING
DIMMER: 2 WIRE PHASE(BY OTHERS)
BLACK
WHITE
GREEN
GND
V+ RED
V- BLACK
FIXTURE
DRIVER
NEUTRAL
LINE
GROUND
ONLY FOR SWITCHES WITH NEUTRAL
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
D19 / DIML19 Dimmer Compatibility Chart 120V ONLY Forward Phase / TRIAC Dimming Manufacturer Product Qty Fixtures Per Dimmer Leviton IPL06-10Z Use fixture wattage per 6613-xxx fixture specification Lutron S-600P sheet to determine S-603P number of fixtures DVSC-603P per dimmer. Max number CT-600P of fixtures is limited by CT-603P dimmer load rating.
120V ONLY Reverse Phase / ELV Dimming Manufacturer Product Qty Fixtures Per Dimmer Leviton 6615 Use fixture wattage per IPE04-xxx fixture specification Lutron NTELV-300 sheet to determine NTELV-600 number of fixtures SELV-300P per dimmer. Max number SELV-303P of fixtures is limited by DVELV-300P dimmer load rating. DVELV-303P
1126 River RoadNew Windsor, NY 12553
© 2020. USAI, LLC.All rights reserved. All designs protected by copyright.I2-264-28 Revised 01/03/2022
T 845–565–8500F 845–561–1130USAI
®
Lighting
DIMMING DRIVER COMPATIBILITY SELECTION GUIDE
D28DIMMING DRIVER WIRING SCHEMES:
USAI®
Lighting
The data cable used must meet the following requirements: • type: shielded, 2-conductor twisted pair • maximum capacitance between conductors: 30 pF/ft • maximum capacitance between conductor and shield: 55 pF/ft • maximum resistance: 0.02 ohms/ft • normal impedance: 100-140 ohms • conductive core: 24 AWG is recommendedIf 3-wire data cables are preferred, we suggest a Belden 9841 or equivalent cable which meets the specifications for EIA RS-485 applications. Do not use standard microphone cables: they cannot transmit DMX512 data reliably over long distances. NOTE: DMX link termination device, should be used on last fixture in line on the circuit to avoid signal loss.
DMX BUS - SHIELDED DATA CABLE
NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures.3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.5. Cap any wires not used separately (not together).
D28 Dimming Driver WiringD28 are programmed dimming drivers. D28 Eldo DMX control dims from 100% to 0.1%
D28DMX CONTROLS OPTIONAL - WHEN
SUPPLIED
DMXOUT
TURN ON DIP SWITCH TO TERMINATE LAST FIXTURE ON DMX BUS
DMXIN
DMX (+)
DMX (+)
DMX (-)
GND
8 BIT DMX 512CONTROLLER(BY OTHERS)
DRIVERNEUTRAL
LINESHIELD
WHITE
DMX BUS - SHEILDED CABLE
BLACK
FIXTURE
BLACK
GREEN
RED
SHIELD
V-
V+
DMX (-)
LED
LAST FIXTURE ON BUS MUST BE TERMINATED
WHEN DMX WIRINGBOARD SUPPLIED
WHEN DMX WIRINGBOARD NOT SUPPLIED
TURN ON DIP SWITCH TOTERMINATE LAST FIXTURE
ON DMX BUS
120 1/4 WATT RESISTOR (BY OTHERS)
WIRED BETWEEN DMX+ AND DMX-
DMX +
120 Ω
SHEILDDMX -