E
Broadcast, Studio,Video & Production
2006
/200
7V
&P
— P
rodu
ct C
atal
ogue
CONTENTS
STUDIO MICROPHONES . . . . . . . . . . . . . . . . . . . . . . . . Page 03 - 13
INTERVIEWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14 - 16
STEREO MICROPHONES . . . . . . . . . . . . . . . . . . . . . . . . Page 17 - 18
SPECIAL MICROPHONES . . . . . . . . . . . . . . . . . . . . . . . Page 19
SHOTGUN MICROPHONES . . . . . . . . . . . . . . . . . . . . . . Page 20 - 23
NECKWORN MICROPHONES . . . . . . . . . . . . . . . . . . . . Page 24 - 25
LAVALIERE MICROPHONES . . . . . . . . . . . . . . . . . . . . . . Page 26 - 29
WIRELESS SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30 - 34
5.1 MONITORING HEADPHONE SYSTEM . . . . . . . . . . . Page 35
HEADPHONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 36 - 41
HEADSETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 42 - 50
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 51 - 59
ABOUT US
Since 1924 beyerdynamic has remained a family owned company with a commitment to continuous research and innovative developments forrecording studios and broadcast industries. Our philosophy is to developand produce excellent audio products. We have always endeavoured touse latest technologies and a high quality standard has always been ouraim. New ideas and creativity contribute to the manufacture of innovativeproducts for an ever growing number of customers. The business unit ”Broadcast, Studio, Video & Production” compriseseminently sophisticated and high-performance microphones, wireless systems, headphones and headsets for professional applications in broadcast, film/ television, and studios as well as for aural-acoustical investigations and measurements like in universities or research centres.Decades of experience, stringent quality and rigorous performance testsare the basis on which we provide our customers with excellent products world-wide. Among them some approved audio industry's standards like the DT 100 headphone and the DT 109 headset.
If you have any queries or need further information, please contact oursales team at [email protected]
STUDIO MICROPHONESwww.beyerdynamic.com23
MC 840
Transducer type. . . . . . . . . . . . . . . . . True condenserWorking principle . . . . . . . . . . . . . . . Pressure gradient Frequency response. . . . . . . . . . . . . . 30 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Selectable: omnidirectional, wide car-
dioid, cardioid, hypercardioid, figure-eight
Open circuit voltage at 1 kHz . . . . . . 18 mV/PaNominal impedance . . . . . . . . . . . . . 180 ΩLoad impedance . . . . . . . . . . . . . . . . 1,000 ΩMax. SPL at 1 KHz. . . . . . . . . . . . . . . 127 dB without pre-attenuation
137 dB with pre-attenuation -10 dB147 dB with pre-attenuation -20 dB
Signal-to-noise ratio rel. to 1 Pa. . . . . Approx. 70 dBA-weighted equivalent SPL . . . . . . . . Approx. 17 dBPower supply. . . . . . . . . . . . . . . . . . . 11 - 52 V phantom powerCurrent consumption . . . . . . . . . . . . 4.6 mARoll-off filter . . . . . . . . . . . . . . . . . . . switchable: 6 dB/oktave at
80 Hz and 160 HzConnector. . . . . . . . . . . . . . . . . . . . . 3-pin XLR male
Pin 1 = Ground, Pin 2 = +, Pin 3 = -Dimensions . . . . . . . . . . . . . . . . . . . . Length: 165 mm
Shaft diameter: 37 mmHead diameter: 70 x 52 x 33 mm
Weight without cable . . . . . . . . . . . . 286 g
Supplied AccessoriesMKV 11 Microphone clamp for shaft diameter
of 32 - 42 mm. . . . . . . . . . . . . . . . . . . . Order # 407.232EA 37 Elastic suspension . . . . . . . . . . . . . . . . . Order # 452.955ZKK 740-833 Transport case . . . . . . . . . . . . . . . . . . . . Order # 504.580
Optional AccessoriesPS 740 Pop shield, black . . . . . . . . . . . . . . . . . . Order # 401.897WS 740/834 Windscreen, charcoal-grey. . . . . . . . . . . Order # 401.994BMC 05 FM Standard microphone cable XLR-XLR,
5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable XLR-XLR,
10 m . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 434.795MAV 802 Multi-purpose mounting for two
microphones for stereo applications. . . . Order # 453.323MSG 248.1 Mains power supply for two micro-
phones, for balanced and unbalanced inputs . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 434.795
MC 840Large diaphragm condenser microphone Order # 482.838
The MC 840 is a compact large diaphragm studio microphone with a gold vaporised double diaphragm and five selectable polarpatterns (omnidirectional, wide cardioid, cardioid, hypercardioid, figure-eight). On the basis of the MC 740 microphone capsule thisnew microphone has been equipped with an improved low-noisepre-amplifier and an impedance transformer without transducer.Due to a two-stage roll-off filter (80 and 160 Hz) compensatingthe close miking effect and a two-stage pre-attenuation (-10 and-20 dB) the MC 840 is a superior microphone for any recording application. It has been designed without compromise to captureevery sound detail with absolute clarity and purity. Applications for the MC 840 include recording orchestras resulting in a superbtransparent sound.
MC 840omnidi-rectional
MC 840wide cardioid
Frequency response curve ±2.5 dB 0 dB = 18 mV/Pa MC 840 omnidirectional
Frequency response curve ±2.5 dB 0 dB = 18 mV/Pa MC 840 wide cardioid
Frequency response curve ±2.5 dB 0 dB = 18 mV/Pa MC 840 cardioid
Frequency response curve ±2.5 dB 0 dB = 18 mV/Pa MC 840 hypercardioid
Frequency response curve ±2.5 dB 0 dB = 18 mV/Pa MC 840 figure eight
MC 840cardioid
MC 840hyper-cardioid
Features• Large diaphragm condenser microphone with a gold vaporised
double diaphragm • Universal studio applications through 5 selectable polar patterns• Improve low-noise pre-amplifier• Impedance transformer without transducer• Two-stage roll-off filter (80 and 160 Hz)• Two-stage pre-attenuation (-10 and -20 dB)• Elastic system suspension
Applications• Studio or live recordings• Vocals• Choirs• Instruments
MC 840figure eight
STUDIO MICROPHONESwww.beyerdynamic.com24
MC 834
Transducer type. . . . . . . . . . . . . . . . . True condenserOperating principle . . . . . . . . . . . . . . Pressure gradient Frequency response: . . . . . . . . . . . . . 20 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Cardioid Open circuit voltageat 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . 20 mV/Pa ± 2 dB = -34 dBVNominal impedance . . . . . . . . . . . . . 180 ΩLoad impedance . . . . . . . . . . . . . . . . > 1,000 ΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 130 dB
140 dB with pre-attenuation -10 dB150 dB with pre-attenuation -20 dB
Signal to noise ratio rel. to 1 Pa . . . . . Approx. 69 dB A-weighted equivalent SPL . . . . . . . . Approx. 18 dBSupply voltage. . . . . . . . . . . . . . . . . . 12 to 48 V phantom powerCurrent consumption . . . . . . . . . . . . Approx. 4 mAConnection . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 165 mm
Shaft diameter: 37 mmHead diameter: 70 x 52 x 33 mm
Weight without cable . . . . . . . . . . . . 290 g
Supplied AccessoriesEA 37 Elastic suspension . . . . . . . . . . . . . . . . . . . Order # 452.955ZKK 834-833 Transport case . . . . . . . . . . . . . . . . . . . . . Order # 393.371
Optional AccessoriesMKV 11 Microphone clamp,
for shaft diameter 32 - 42 mm . . . . . . . . . Order # 407.232 BMC 05 FM Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . . . Order # 434.795MSG 248.1 Mains power supply unit for two
microphones, for balanced and unbalanced inputs . . . . . . . . . . . . . . . . . . Order # 100.943
PS 740 Pop shield, black. . . . . . . . . . . . . . . . . . . . Order # 401.897WS 740/834 Windscreen, charcoal-grey . . . . . . . . . . . . Order # 401.994MAV 802 Multi-purpose mounting for two
microphones for stereo applications . . . . . Order # 453.323
MC 834Condenser Microphone
The MC 834 condenser microphone features aextremely linear frequency curve and a frequency response of 20 to 20,000 Hz. Due to its cardioid polar pattern it has a high gain-before-feedback. Without pre-attenuation the microphone has a SPL capability of 130 dB, with pre-attenuation up to 150 dB. The MC 834 offers a dynamic that cannot bereached by any digital recording system. The micro-phone has a balanced output and can be poweredby phantom power between 12 and 52 V. The MC 834 is a universal studio microphone to beused for digital recording, both lead and back-up vocals, voice-overs, miking of pianos, strings and brass instruments. It is also suited to the home recording artist.
Features• SPL capability up to 150 dB• Switchable 10 and 20 dB attenuation• 2-position low frequency roll-off• Internal elastic suspension
Applications• Studio• Vocals• Instruments• Home recording• DAT- and MD-recordings• On-Air
Pre-Attenuation Switching Low Frequency Roll-off Switching
To adjust for SPL levels in excess of 130 dB, a knurled pre-attenuation switch with indicator is provided on the front of thebarrel and is rotated to show 0 dB (no attenuation), 10 dB (SPL’s up to 140 dB),or 20 dB (SPL’s up to 150 dB).
To adjust for proximity effect or extra ne ous low fre quency ambientsounds, a three position knurled switchwith indicator is provided on the rear ofthe barrel and is rotated to show LIN (flat,with no roll-off), 80 (6 dB per octave roll-off below 80 Hz), or 160 (6 dB per octaveroll-off below 160 Hz).
-20dB
Pre-AttenuationOFF
Pre-AttenuationON
Pre-AttenuationON
Order # 441.228
Frequency response curve ±2.5 dB 0 dB = 20 mV/Pa MC 834
STUDIO MICROPHONESwww.beyerdynamic.com25
Frequency response curve ±2 dB 0 dB = 30 mV/Pa MC 930
MC 930
Transducer type. . . . . . . . . . . . . . . . . True condenserOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 40 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . CardioidOpen circuit voltageat 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . 30 mV/PaNominal impedance . . . . . . . . . . . . . 180 ΩLoad impedance . . . . . . . . . . . . . . . . 1,000 ΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 125 dB (with pre-attenuation: 140 dB)Signal-to-noise ratio rel. to 1 Pa . . . . . . . . . . . . . . . . . . . . 71 dBA-weighted equivalent SPL . . . . . . . . 16 dBBass roll-off filter . . . . . . . . . . . . . . . . Switchable, 6 dB/octave at 250 HzPower supply. . . . . . . . . . . . . . . . . . . 11 - 52 V phantom powerCurrent consumption . . . . . . . . . . . . 4.6 mAConnection . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 128 mm
Diameter: 21 mmWeight without cable . . . . . . . . . . . . 115 g
Supplied AccessoriesMKV 9 Microphone clamp for shaft diameter
of 19 - 21 mm . . . . . . . . . . . . . . . . . . . . . Order # 407.224
Optional AccessoriesEA 19/25 Elastic suspension 19 - 25 mm,
incl. MKV 11 microphone clamp. . . . . . . . Order # 407.194BMC 05 FM Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . . . Order # 434.795WS 101 Windscreen, charcoal-grey . . . . . . . . . . . . Order # 111.244WS 53 Windscreen, small, charcoal-grey . . . . . . . Order # 436.607WJ 930 Windjammer, additional windscreen fits
to WS 53 and WS 72, hair length 40 mm . Order # 490.903MAV 800 Clip for hanging mounting
of microphones . . . . . . . . . . . . . . . . . . . . Order # 448.133MAV 802 Multi-purpose mounting for
two microphones for stereo applications. . Order # 453.323
Two MC 930 microphones used for XY stereo recording with MAV 800 and MAV 802
MC 930Condenser Microphone Order # 465.267Stereo-Set Order # 471.968
This high-quality, universal condenser microphone features an exceptional price/performance ratio. Features of the MC 930 are thewide frequency response of 40 - 20,000 Hz and a signal-to-noise ratioof 71 dB. The MC 930 is suitable for miking choirs, orchestras and solo instruments. Due to the switchable pre-attenuation of 15 dB it provides excellent performance at high sound pressure levels. The switchable bass roll-off filter with 6 dB/Octave at 250 Hz compensates for proximity effects. With the WS 101 windscreen the MC 930 can be used for vocal applications and speech. The MC 930 is phantom powered (11 - 52 V) and is suitable for liveapplications and installations.Due to its cardioid polar pattern, the MC 930 has a high gain-before-feedback and eliminates noise from the rear. It is not only a first-classtool for studios, but also for sound contracting systems, where excel-lent sound and maximum gain-before-feedback is required. ExceptionalXY stereo recordings may be achieved by using two MC 930 micro-phones. Therefore the MC 930 is also available as a matched micro-phone pair with useful accessories in a rugged plastic case.
Features• Cardioid polar pattern• Switchable pre-attenuation (-15 dB)• Switchable bass roll-off filter at 250 Hz• Phantom power 11 - 52 V
Applications• Studio• Home recording• Live applications• Vocals• Choirs• Instruments
(overheads, brass and string instruments)
MC 930 Stereo-SetCondenser microphone set (cardioid), 2 stereo-paired MC 930 incl. 2 EA 19/25elastic suspensions and 2 WS 53 wind-screens in a transport case
Order # 471.968
STUDIO MICROPHONESwww.beyerdynamic.com26
Frequency response curve ±2.5 dB 0 dB = 30 mV/Pa CK 930
CK 930 SetCondenser Microphone Set Order # 490.830
The extremely compact CK 930 is built to deliver highest fidelity in a small and versatile package. Its large S/N ratio and flat frequency response with a slight hf-boostensure the natural reproduction of nearly every instrument or voice. Outstanding off-axis rejection of the cardioid capsule reduces the risk of feedback when used insound reinforcement applications even with larger miking distances, which are no problem with CK 930´s high sensitivity. Switchable 15dB pad, low-cut filter and an integrated DC/DC converter to prove microphone´s specifications even with non-standard phantom powerering make it a perfect miking solution. Mentioning TV news rooms or small spaced orchestra-digs just limits the impressive variety of applications for the CK 930.
The CK 930 Set comprises the CK 930 condenser microphone capsule with impedancetransducer, the VC 900 pre-amplifier, the MVK 900 connecting cable an the ST 930 mini desk stand.
Features• Condenser microphone capsule with remote pre-amplifier • Linear frequency characteristic with slightly accentuation of highs• Switchable pre-attenuation (-15 dB) and roll-off filter (6 dB at 250 Hz) • Compact, unobtrusive and rugged metal housing
Applications• Studio or live applications• Speech (lectern)• Instruments (orchestras, violins, acoustic guitars)
CK 930
measured with CV 900 pre-amplifierTransducer type. . . . . . . . . . . . . . . . . True condenserWorking principle . . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 40 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . CardioidOpen circuit voltagel at 1 kHz . . . . . . 30 mV/PaNominal impedance . . . . . . . . . . . . . ≤ 180 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1 kΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 125 dB without pre-attenuation
140 dB with pre-attenuation -15 dBSignal-to-noise ratio rel. to 1 Pa. . . . . 71 dBA-weighted equivalent SPL . . . . . . . . 16 dBBass roll-off filter . . . . . . . . . . . . . . . . Swichtable, 6 dB/octave at 250 HzPower supply. . . . . . . . . . . . . . . . . . . 11 - 52 V phantom powerCurrent consumption . . . . . . . . . . . . 4.6 mAConnection . . . . . . . . . . . . . . . . . . . . 4-pin mini-XLR male
Pin 1 = 0 VPin 2 = +48 V InputPin 3 = AF-OutputPin 4 = +8 V Input
Dimensions Diameter . . . . . . . . . . . . . . . . . . . . . . 21 mmLength . . . . . . . . . . . . . . . . . . . . . . . 43 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 46 g
Pre-amplifier CV 900
Connection Input . . . . . . . . . . . . . . . 5-pin mini-XLR malePin 1 = 0 VPin 2 = +50 V „static“ OutputPin 3 = AF-InputPin 4 = +8.2 VPin 5 = free
Connection Output . . . . . . . . . . . . . . 3-pin XLR male, balanced Pin 1 = 0 VPin 2 = AF-Output +Pin 3 = AF-Output -
DimensionsDiameter . . . . . . . . . . . . . . . . . . . . . . 21 mmLength . . . . . . . . . . . . . . . . . . . . . . . 98 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 95 g
Supplied AccessoriesCK 930 Studio condenser microphone capsule
(cardioid) with impedance transducer . . . . Order # 490.806CV 900 Remote pre-amplifier for CK 930 with
switchable bass roll-off filter, 5-pin mini-XLR and 3-pol. XLR . . . . . . . . . . . . . . Order # 490.814
MVK 900 Connecting cable (CK 930 and CV 900),3 m, 4-pin mini-XLR to 5-pin mini-XLR . . . Order # 490.822
ST 930 Mini desk stand . . . . . . . . . . . . . . . . . . . . Order # 490.849
Optional accessoriesWS 53 Windscreen, charcoal-grey . . . . . . . . . . . . Order # 436.607WJ 930 Windjammer, additional windscreen
fits to WS 53 and WS 72, hair length 40 mm . . . . . . . . . . . . . . . . . . Order # 490.903
BMC 05 FM Standard microphone cable XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 434.787
BMC 10 FM Standard microphone cable XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 434.795
CK 930 with ST 930mini desk stand
CV 900
STUDIO MICROPHONESwww.beyerdynamic.com27
MCE 530Condenser Microphone Order # 466.387Stereo-Set Order # 471.941
The MCE 530 is a cardioid condenser microphone suitable for both project studios andsemiprofessionals. It consists of a lightweight, but rugged, plastic casing strengthened with carbon fibres. Its small and short design permits flexible and unobtrusive positioning. The microphone is powered by phantom power between 12 and 48 V. The frequency response of the MCE 530 has been optimised for miking instruments and choirs. Using the WS 53 windscreen the MCE 530 is an ideal speaker’s microphone in churches and halls. Exceptional XY stereo recordings may be achieved using two MCE 530 microphones with the adjustable MAV 802 mounting for two microphones. Therefore the MCE 530 is also available as a matched microphone pair with useful accessories in a rugged plastic case.
MCE 530
(measured at 48 V phantom powering)Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 30 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . CardioidOpen circuit voltage . . . . . . . . . . . . . 5 mV/Pa = -46 dBVNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . > 1 kΩMax. SPL at f = 1 kHz . . . . . . . . . . . . 136 dB (at 48 V phantom power)
126 dB (at 12 V phantom power)S/N ratio . . . . . . . . . . . . . . . . . . . . . . 64 dBA-weighted equivalent SPL . . . . . . . . 22 dBSupply voltage. . . . . . . . . . . . . . . . . . 12 - 48 V phantom powerCurrent consumption . . . . . . . . . . . . < 6 mAConnection . . . . . . . . . . . . . . . . . . . . 3-pin XLR plug, maleWeight . . . . . . . . . . . . . . . . . . . . . . . 36 g
Supplied AccessoriesMKV 109 Microphone clamp for shaft
diameter of 19 – 21 mm.. . . . . . . . . . . . Order # 466.824
Optional AccessoriesEA 19/25 Elastic suspension 19 - 25 mm,
incl. MKV 11 microphone clamp . . . . . . Order # 407.194BMC 05 FM Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . Order # 434.795MAV 800 Clip for hanging mounting
of microphones . . . . . . . . . . . . . . . . . . . Order # 448.133MAV 802 Multi-purpose mounting for two
microphones for stereo applications. . . . Order # 453.323WS 53 Windscreen for MCE 530,
charcoal-grey. . . . . . . . . . . . . . . . . . . . . Order # 436.607WJ 930 Windjammer, additional windscreen fits
to WS 53 and WS 72, hair length 40 mm. . . . . . . . . . . . . . . . . Order # 490.903
MCE 530 Stereo-SetCondenser microphone set (cardioid), 2 stereo-paired MCE 530 incl. 2 MKV 109 microphone clamps, 2 WS 53 windscreens and stereo bracket in a transport case. . . . . . . . . . . Order # 471.941
Two MCE 530 microphones usedfor XY stereo recording with MAV 800 and MAV 802
Features• Cardioid polar pattern• High SPL capability• Slim, unobtrusive design• Plastic casing strenghtened with
carbon fibres
Applications• Studio• Home recording• Instruments• Choirs
MCE 530 Stereo-Set
Frequency response curve ±2.5 dB 0 dB = 5 mV/Pa MCE 530
STUDIO MICROPHONESwww.beyerdynamic.com18
M 99Dynamic Microphone Order # 445.394
The M 99 is a dynamic moving coil microphone ofstudio quality. The tailored frequency response suitsmany applications from instrument miking to on-airbroadcasting. The beyerdynamic TG-X technology usedin the M 99 features a strong Neodymium magnet system and a mass reduced special Mylar diaphragm to give the microphone a powerful reproduction with excellent transient characteristics. The frequency response is extremely linear andguarantees audio quality which has until now, only been achieved by using high-quality condenser micro-phones.The frequency select-switch at the base of themicrophone allows three settings of equalisation, linearand two optimised settings for vocals and instrumentmiking. A second switch is for presence accentuation.This allows further adjustment for close mikingtechniques or kick drum miking. The hypercardioid polarpattern helps to eliminate feedback in live applicationsand allows a good separation between different instru-ments. The microphone can operate at very high soundpressure levels without loss of sound quality and virtuallyno distortion.The M 99’s die-cast casing is made of aircraft gradealuminium and finished with an attractive metallicvarnish.
Features• Hypercardioid polar pattern• Switchable presence accentuation and equalisation
for kick drum• Extremely linear frequency response• Rugged construction• Integrated elastic suspension
Applications• Vocals• Radio announcers• Instruments• Kick drum
M 99
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 30 - 18,000 Hz
(refer to frequency responses)Polar pattern . . . . . . . . . . . . . . . . . . . HypercardioidOpen circuit voltage at 1 kHz . . . . . . 3.0 mV/Pa / 2 mV/Pa
(refer to frequency responses)Magnetic field suppression . . . . . . . . > 20 dB at 50 HzNominal impedance . . . . . . . . . . . . . 280 ΩLoad impedance . . . . . . . . . . . . . . . . > 1,000 ΩDiaphragm . . . . . . . . . . . . . . . . . . . . Hostaphan®
Casing. . . . . . . . . . . . . . . . . . . . . . . . AluminiumConnector. . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 163 mm
Shaft diameter: 23/25 mmHead diameter: 56 mm
Weight without cable . . . . . . . . . . . . 421 g
Supplied AccessoriesEA 90 Elastic suspension . . . . . . . . . . . . . . . . . Order # 452.270ZKK 740-833 Transport case . . . . . . . . . . . . . . . . . . . . Order # 504.580
Optional AccessoriesBMC 05 FM Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . Order # 434.795GST 400 Microphone stand, 3/8",
height 0.90 - 1.65 m, with G 400 boom . . . . . . . . . . . . . . . . . . . . . Order # 421.294
GST 500 Microphone stand, 3/8", height 0.85 - 1.6 m, with telescopic G 500 boom . . . . . . . . . . . . . Order # 406.252
ST 99 Microphone stand for kick drum,small and heavy . . . . . . . . . . . . . . . . . . . Order # 471.917
WS 740/834 Windscreen, charcoal-grey. . . . . . . . . . . Order # 401.994
A
B
C
Frequency response curve ±2.5 dB 0 dB = 2 mV/Pa Measuring 1 m
Frequency response curve ±2.5 dB 0 dB = 3 mV/Pa Measuring 1 m
Frequency response curve ±2.5 dB 0 dB = 2 mV/Pa Measuring 1 m
B
C
STUDIO MICROPHONESwww.beyerdynamic.com19
M 130 Dynamic Double Ribbon Microphone Order # 129.534
beyerdynamic is one of few microphone manufacturers world-widethat still produce ribbon microphones. One of them is the legendary M 130. The M 130’s unique double ribbon element has a superb transient response, creating a highly detailed sound with unsurpassed accuracy and transparency.The bidirectional figure eight polar pattern effectively suppresses unwanted interference from the sides. The M 130’s balanced, uncoloured sound handles a wide variety of applications. In conjunction with the hypercardioid M 160, the M 130 is ideal for creating an authentic stereo image through the use of the MS-(Mid-Side) technique.The M 130 gives excellent results when the Mid-Side technique isused to record or broadcast a true stereo image. Its rugged designhandles the demands of remote recording/broadcast sessions as easilyas those of the studio. Alone, the M 130 allows the recordingof background audience noise and concert hall “ambience” withoutunwanted resonances. In the recording studio it is effective with backing vocal groups, percussion and toms. The M 130’s crisply articulated, uncoloured sound is well suited to such demanding audiophile applications as digital and direct-to-disc recording.
Features• Double ribbon microphone• Consistent figure eight polar pattern• Superb transient response• Compact and rugged design• Warm and natural sound
Applications• Authentic recordings• Studio• Instruments (overhead, toms)• MS-stereophony with M 160
M 130
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 40 - 18,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Figure eightRear attenuation at 1 kHz . . . . . . . . . > 25 dB at 110°Open circuit voltagat 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . 1.0 mV/Pa = -60 dBVNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1,000 ΩDiaphragm . . . . . . . . . . . . . . . . . . . . Pure aluminiumCase/finish . . . . . . . . . . . . . . . . . . . . BrassConnector. . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 128 mm
Shaft diameter: 23 mmHead diameter: 38.5 mm
Weight without cable . . . . . . . . . . . . 150 g
Supplied AccessoriesMKV 8 Microphone clamp for shaft
diameters of 22 - 32 mm . . . . . . . . . . . Order # 407.216
Optional AccessoriesBMC 05 FM Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . Order # 434.795MKV 6 Microphone clamp (clothes peg style clip)
for shaft diameters of 19 - 32 mm . . . . Order # 407.208GST 400 Microphone stand, 3/8",heigh
0.90 - 1.65 m, with G 400 boom . . . . . Order # 421.308GST 500 Microphone stand, 3/8", heigh
0.85 - 1.60 m, with telescopicG 500 boom . . . . . . . . . . . . . . . . . . . . Order # 406.252
WS 260 Windscreen, charcoal-grey . . . . . . . . . . Order # 111.309EA 19/25 Elastic suspension for shaft
19 - 25 mm, incl. clamp MKV 11 . . . . . Order # 407.194
MS-stereophony with M 160 and M 130
Frequency response curve ±2.5 dB 0 dB = 1 mV/Pa M 130
STUDIO MICROPHONESwww.beyerdynamic.com10
M 160 Dynamic Double Ribbon Microphone
Order # 100.668
beyerdynamic is one of few microphone manufacturersworld-wide that still produce ribbon microphones.A classic one is the M 160, a dynamic double ribbon microphone.Featuring a hypercardioid polar pattern with a noise attenuation of 25 dB at 110°, the M 160 is anoutstanding microphone which is very effective for alltypes of remote and in-studio voice reproduction. In therecording studio, the M 160 is recommended for mikingstring instruments such as violins, violas, cellos and forpianos, saxophones as well as for hi-hat and toms.The non-glare black surface of the M 160 and its smalldimensions allow the unobtrusive use in TV or filmstudios. In conjunction with the M 130 dynamic doubleribbon microphone the M 160 is ideal for stereorecordings in MS technique.
Features• Unique double ribbon microphone transducer• Hypercardioid polar pattern• Extended frequency response• Excellent transparency and transient response• Compact and rugged design• Warm and natural sound
Applications• Instrumental (saxophone, violins, piano, e-guitar
amplifier, harp, overheads, toms) • MS-stereophony with M 130
M 160
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 40 - 18,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . HypercardioidRear attenuation at 1 kHz . . . . . . . . . > 25 dB at 110°Open circuit voltageat 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . 1.0 mV/Pa = -60 dBVNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1,000 ΩDiaphragm . . . . . . . . . . . . . . . . . . . . Pure aluminiumCase/finish . . . . . . . . . . . . . . . . . . . . BrassConnector. . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 156 mm
Shaft diameter: 23 mmHead diameter: 38 mm
Weight without cable . . . . . . . . . . . . 156 g
Supplied AccessoriesMKV 8 Microphone clamp
for shaft diameters of 22 - 32 mm. . . . . Order # 407.216
Optional AccessoriesBMC 05 FM Standard microphone cable
XLR-XLR, 5 m. . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m. . . . . . . . . . . . . . . . . . . . Order # 434.795GST 400 Microphone stand, 3/8",
height 0.90 - 1.65 m, with G 400 boom . . . . . . . . . . . . . . . . . Order # 421.308
GST 500 Microphone stand, 3/8", height 0.85 - 1.60 m,with telescopic G 500 boom . . . . . . . . . Order # 406.252
WS 260 Windscreen, charcoal-grey. . . . . . . . . . . Order # 111.309EA 19/25 Elastic suspension for shaft
19 - 25 mm, incl. clamp MKV 11 . . . . . . Order # 407.194
Frequency response curve ±2.5 dB 0 dB = 1 mV/Pa M 160
STUDIO MICROPHONESwww.beyerdynamic.com11
M 260
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 100 - 18,000 Hz (distance: 1 m)
40 - 18,000 Hz (distance: 2 cm)Polar pattern . . . . . . . . . . . . . . . . . . . HypercardioidRear attenuation at 1 kHz . . . . . . . . . > 20 dB at 115°Open circuit voltageat 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . 1.2 mV/Pa = -58 dBVNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1,000 ΩDiaphragm . . . . . . . . . . . . . . . . . . . . Pure aluminiumCase/finish . . . . . . . . . . . . . . . . . . . . BrassConnector. . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 163 mm
Shaft diameter: 24 mmHead diameter: 43.5 mm
Weight without cable . . . . . . . . . . . . approx. 230 g
Supplied AccessoriesMKV 8 Microphone clamp
for shaft diameters of 22 - 32 mm . . . . Order # 407.216
Optional AccessoriesBMC 05 FM Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . Order # 434.795GST 400 Microphone stand, 3/8",
height 0.90 - 1.65 m,with G 400 boom . . . . . . . . . . . . . . . . Order # 421.308
GST 500 Microphone stand, 3/8", height 0.85 - 1.60 m,with telescopic G 500 boom . . . . . . . . Order # 406.252
WS 260 Windscreen, charcoal-grey . . . . . . . . . . Order # 111.309
M 260Dynamic Ribbon Microphone Order # 127.329
The M 260 is used for vocals and miking instruments atbroadcast, recording and film studios. Its flat frequencyresponse and natural, warm “ribbon“ sonic profile makeit a highly effective element of the digital recording process.The hypercardioid polar pattern provides an extremelyhigh gain-before-feedback and elimination of lateralnoise (maximum at 115°). The M 260 is equipped with a built-in high-pass-filter which compensates the closemiking effect, when the microphone is applied very closeto an instrument. The microphone also features a highinsensitivity towards magnetic stray fields and extremetemperatures. The rugged grille protects the microphonesystem against accidental hits and kicks.
Features• Ribbon transducer performance in a rugged,
versatile configuration• Hypercardioid polar pattern• Extremely high gain-before-feedback• Fast, transient response• Wide, flat frequency response• Rugged metal casing
Applications• Vocals• Instrumental miking• Speech
Frequency response curve ±2.5 dB 0 dB = 1.2 mV/Pa M 260
STUDIO MICROPHONESwww.beyerdynamic.com12
Opus 51
measured with CV 3 preamp (3-pin connection)Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . PressureFrequency response. . . . . . . . . . . . . . 30 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Half-sphericalOpen circuit voltage at 1 kHz . . . . . . 7 mV/PaNominal impedance . . . . . . . . . . . . . 250 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1 kΩMax. SPL at 1 kHz, k ≤ 10% . . . . . . . Approx. 131 dBS/N ratio rel. to 1 Pa . . . . . . . . . . . . . Approx. 60 dBA-weighted equivalent SPL . . . . . . . . Approx. 26 dBPower supply. . . . . . . . . . . . . . . . . . . 11 - 52 V phantom powerPower consumption . . . . . . . . . . . . . 3.6 mAConnection . . . . . . . . . . . . . . . . . . . . 4-pin LEMO-plugDimensions . . . . . . . . . . . . . . . . . . . . Diameter: 70 mm
Height: 10.5 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 85 g
Supplied AccessoriesCV 3 Pre-amplifier for phantom power. . . . . . Order # 466.891
Optional AccessoriesBMC 05 FM Standard microphone cable
XLR-XLR, 5 m. . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m. . . . . . . . . . . . . . . . . . . . Order # 434.795ZCV Battery compartment for CV 3. . . . . . . . Order # 451.096
Opus 51Acoustical Boundary Condenser Microphone Order # 455.334
The Opus 51 is suitable for studio and stage applications such asmiking instruments and is particular benefit when used upright orfor grand pianos where the microphone can be placed internally.The Opus 51 can also be used within a round-table discussions system as well as stage and film applications for ambiencerecording. The half-spherical polar pattern of the Opus 51 has avery wide and even pickup angle and is suitable for miking largesound sources simplifying the choice of microphone as it is not dependent on the distance to the sound source.
Features• Half-spherical polar pattern• Linear frequency response• Small dimensions• Battery or phantom powering• Step-proof
Applications• Studio recordings• Live applications• Instruments (grand piano, kick drum)
Frequency response curve ±2.5 dB 0 dB = 14 mV/Pa Opus 51
STUDIO MICROPHONESwww.beyerdynamic.com13
M 201 TGDynamic Microphone Order # 406.910
The M 201 TG’s unique construction reduces handlingnoise to a minimum, giving excellent results as an audience response microphone in TV studios and for location production of vocals and sound effects. Its uniform response and small size makes the M 201 TGespecially effective for recording and reinforcing snaredrums, hi-hats, rack toms and percussion. It also workswell with banjos and acoustic guitars.
Features• Hypercardioid polar pattern• Clarity, neutrality and superior intelligibility• Rugged construction• Integrated hum-buck coil
Applications• Snare drum• Hi-hat• Floor tom• Overhead• Piano, grand piano• Acoustical guitar• String instruments• Interviewing
M 201 TG
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 40 - 18,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . HypercardioidRear attenuation at 1 kHz . . . . . . . . . > 20 dB at 120°Open circuit voltage at 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . . . . . . . . 1.2 mV/Pa = -58 dBVMagnetic field suspension . . . . . . . . . > 18 dB at 50 HzNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1,000 ΩDiaphragm . . . . . . . . . . . . . . . . . . . . Hostaphan®
Case/finish . . . . . . . . . . . . . . . . . . . . BrassConnector. . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 160 mm
Shaft diameter: 24 mmHead diameter: 24 mm
Weight without cable . . . . . . . . . . . . 220 g
Supplied AccessoriesMKV 8 Microphone clamp
for shaft diameter of 22 - 32 mm . . . . . Order # 407.216WS 101 Windscreen, charcoal-grey. . . . . . . . . . . Order # 111.244
Optional AccessoriesBMC 05 FM Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . Order # 434.795MKV 6 Microphone clip for shaft diameter
of 19 - 32 mm. . . . . . . . . . . . . . . . . . . . Order # 407.208GST 400 Microphone stand, 3/8",
height 0.90 - 1.65 m, with G 400 boom . . . . . . . . . . . . . . . . . Order # 421.308
GST 500 Microphone stand, 3/8", height 0.85 - 1.60 m, with telescopic G 500 boom . . . . . . . . . Order # 406.252
ST 300 Desktop stand, 3/8" . . . . . . . . . . . . . . . Order # 432.814EA 19/25 Elastic suspension 19 - 25 mm,
incl. MKV 11 microphone clamp . . . . . . Order # 407.194
Frequency response curve ±2.5 dB 0 dB = 1.2 mV/Pa M 201 TG
INTERVIEWINGwww.beyerdynamic.com14
M 58Dynamic Microphone Order # 403.660
The M 58 has been specifically designed to satisfy the demands of Electric News Gathering (ENG) and Electronic Field Production (EFP) applications. Its sophisticated internal shock-mount dramatically reduceshandling noise, while the microphone’s frequency response has been tailored to provide broadcasters with a very accurate and intelligible sound.The M 58’s weight-balanced design provides journalists with a high degreeof comfort during lengthy interviews. Its rugged construction enables the microphone to withstand physical and environmental punishment typically encountered during field production operations. The M 58’s slim-profile and non-glare finish result in a low profile on camera.
Features• High output moving coil transducer• Internal shock-mount reduces handling noise • Extended frequency response with rising high end
for maximum intelligibility• Rugged construction• Non-glare, scratch-resistent finish• Weight-balanced, slim-profile design
Applications• Interviewing
M 58
Transducer type. . . . . . . . . . . . . . . . . Dynamic moving coilOperating principle . . . . . . . . . . . . . . PressureFrequency response. . . . . . . . . . . . . . 40 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . OmnidirectionalOpen circuit voltageat 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . 1.3 mV/Pa = -58 dBVNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . > 200 ΩDiaphragm . . . . . . . . . . . . . . . . . . . . Makrofol®
Casing. . . . . . . . . . . . . . . . . . . . . . . . AluminiumConnection . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 260 mm
Shaft diameter: 23 mmHead diameter: 40 mm
Weight without cable . . . . . . . . . . . . 256 g
Supplied AccessoriesWS 58 AZ Windscreen, charcoal-grey. . . . . . . . . . . Order # 404.632
Optional AccessoriesBMC 05 FM Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM Standard microphone cable
XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . Order # 434.795MKV 6 Microphone clip for shaft diameter
of 19 - 32 mm. . . . . . . . . . . . . . . . . . . . Order # 407.208MKV 8 Microphone clamp
for shaft diameter of 22 - 32 mm . . . . . Order # 407.216WS 58 WS Windscreen, white. . . . . . . . . . . . . . . . . Order # 406.821WS 58 BL Windscreen, blue. . . . . . . . . . . . . . . . . . Order # 415.596WS 58 GE Windscreen, yellow . . . . . . . . . . . . . . . . Order # 415.251WS 58 GN Windscreen, green. . . . . . . . . . . . . . . . . Order # 415.618
Frequency response curve ±2.5 dB 0 dB = 1.3 mV/Pa M 58
INTERVIEWINGwww.beyerdynamic.com15
M 59 / M 59 SDynamic Microphones
The M 59 is a rugged, vocal quality dynamic microphone employing enhanced-field magnet technology designed to withstand the critical demands of in-studio or on-location ENG/EFP speech and interview applications. The microphone’s low mass, large diaphragm Macrolon element and hypercardioid polar pattern provides very fast transient response, high output, high sensitivity, with startlingly accurate reproduction of the sound source while also providing excellent off-axis rejection. Each M 59 incorporates a sophisticated internal shock-mount isolation system designed to reduce stand, boom, or handheld noise, and vibration.Its durable construction and non-glare finish will provide consistent protection against the rigors of on-air and on-location ENG/EFP productionapplications. The M 59 also encorporates an internal multi-stage blast filterdesigned to reduce undesirable wind or pop noise. An optional WS 59 largecell windscreen is also available and recommended for on-air, voice-overand other close talking applications.The M 59 is designed to meet the critical demands of studio on-the-air orstudio voice-overs while also meeting the rigors of on-location ENG/EFPnews. Due to its high gain-before-feedback the M 59 is ideal for lecterns or miking of wind instruments.The M 59 can be used on a stand, boom, gooseneck, or as a handheld microphone.
Features• Hypercardioid polar pattern• Fast transient response for increased sonic accuracy• Tailored frequency response for rich, crisp sound noise• Low mass, large diaphragm• Enhanced-field rare earth magnet for high output and sensitivity• Non-glare finish• Internal shock-mount reduces handling
Applications• Interviewing• Vocals• Speech• Instruments
M 59 / M 59 S
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 50 - 16,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . HypercardioidRear attenuation at 1 kHz . . . . . . . . . > 25 dB at 120°Open circuit voltageat 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . 3.0 mV/Pa = -53 dBVMagnetic field suspension . . . . . . . . . > 20 dB = 50 HzNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . > 1,000 ΩDiaphragm . . . . . . . . . . . . . . . . . . . . Macrolon®
Case/finish . . . . . . . . . . . . . . . . . . . . AluminiumConnector. . . . . . . . . . . . . . . . . . . . . 3-pin XLR maleDimensions . . . . . . . . . . . . . . . . . . . . Length: 205 mm
Shaft diameter: 24/32 mmHead diameter: 50.5 mm
Weight without cable . . . . . . . . . . . . 227 g
VersionsM 59 Dynamic microphone, hypercardioid . . . Order # 415.677M 59 S Dynamic microphone, hypercardioid,
with On/Off switch . . . . . . . . . . . . . . . . Order # 415.669
Supplied AccessoriesMKV 8 Microphone clamp
for shaft 22 - 32 mm . . . . . . . . . . . . . . . Order # 407.216
Optional AccessoriesEA 19/25 Elastic suspension for shaft diameter
of 19 - 25 mm, incl. MKV 11 microphone clamp. . . . . . . . . . . . . . . . . Order # 407.194
BMC 05 FM Standard microphone cable XLR-XLR, 5 m . . . . . . . . . . . . . . . . . . . . Order # 434.787
BMC 10 FM Standard microphone cable XLR-XLR, 10 m . . . . . . . . . . . . . . . . . . . Order # 434.795
GST 400 Microphone stand, 3/8", height 0.90 - 1.65 m, with G 400 boom . . . . . . . . . . . . . . . . . Order # 421.308
GST 500 Microphone stand, 3/8", height 0.85 - 1.60 m, with telescopic G 500 boom . . . . . . . . . Order # 406.252
PS 580 Pop shield, black . . . . . . . . . . . . . . . . . . Order # 417.793WS 59 AZ Windscreen, charcoal-grey. . . . . . . . . . . Order # 419.087WS 59 BL Windscreen, blue. . . . . . . . . . . . . . . . . . Order # 419.095WS 59 GE Windscreen, yellow . . . . . . . . . . . . . . . . Order # 419.109WS 59 GN Windscreen, green. . . . . . . . . . . . . . . . . Order # 419.117WS 59 RT Windscreen, red . . . . . . . . . . . . . . . . . . Order # 419.125WS 59 WS Windscreen, white. . . . . . . . . . . . . . . . . Order # 419.133
Frequency response curve ±2.5 dB 0 dB = 3 mV/Pa M 59
INTERVIEWING www.beyerdynamic.com16
MCE 58Condenser Microphone Order # 450.367
The MCE 58 condenser microphone has been specially developed forinterviewing and broadcasting. Its unbalanced output supplies a very high level which allows directconnection to mobile DAT and MD recorders. The elastic suspension of the transducer element eliminates unwanted handling noise andbuilt-in active filters suppress unwanted low frequency noise such astraffic rumble. The MCE 58 has a frequency response curve which has been optimised for excellent intelligibility of speech. The non-glare surface is scratch-resistant and will withstand the rough use oftenassociated with news gathering events.
Features• Omnidirectional polar pattern• High output level • Rugged construction• Slim-line design• Battery powering (1.5 V)
Applications• Interviewing
MCE 58
Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure Frequency response. . . . . . . . . . . . . . 40 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . OmnidirectionalOpen circuit voltage at 1 kHz . . . . . . 4 mV/PaNominal impedance . . . . . . . . . . . . . 370 Ω (unbalanced)Load impedance . . . . . . . . . . . . . . . . 2 kΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 132 dBSignal-to-noise-ratio rel. to 1 Pa . . . . 60 dBA-weighted equivalent SPL . . . . . . . . 26 dBSupply voltage. . . . . . . . . . . . . . . . . . 1.5 V battery (type AA/LR 6)Current consumption . . . . . . . . . . . . 20 mAOperating time with battery . . . . . . . 80 hoursMale connector . . . . . . . . . . . . . . . . . 3-pin XLR; 1 and 3 = ground, 2 = signal +Dimensions . . . . . . . . . . . . . . . . . . . . Length: 260 mm
Shaft diameter: 25 mmHead diameter: 45 mm
Weight without cable . . . . . . . . . . . . 200 g
Supplied AccessoriesMKV 8 Microphone clamp
for shaft diameter of 22 - 32 mm . . . . . Order # 407.216Battery 1.5 V (Type Mignon AA/LR 6)
Optional AccessoriesWS 91 Windscreen, charcoal-grey. . . . . . . . . . . Order # 451.029MVK N (C)-K3 Connecting cable
XLR - stereo mini jack (3.5 mm) . . . . . . . Order # 406.813MWK N (C)-K3 Coiled cable
XLR - stereo mini jack (3.5 mm) . . . . . . . Order # 470.570
Frequency response curve ±2.5 dB 0 dB = 4 mV/Pa MCE 58
17
MCE 72Stereo Condenser Microphone
The MCE 72 is a compact stereo microphone for XY-recording with wide and linear frequency response producing uncoloured, high-quality recordings. The MCE 72 is suitable for stereo recording in home studio applications, concert recordings with DAT or MD, film, video andinterviewing.For musicians the MCE 72 is an excellent microphone for assessingperformance in rehearsals, production and concerts. For stereo ambientsound recording, the microphone is suitable for direct connection to mostcamcorders, DAT and MD recorders.The MCE 72 has two microphone capsules that are mounted in an angleof ±60° to the microphone axis to achieve a wide recording range and anaccurate reproduction of the sound source. The optional EA 19/25 elastic suspension suppresses handling noiseeffectively.Using the optional special EA 86 elastic suspension with a flash holder, theMCE 72 can be mounted onto the “hot shoe” of a camcorder directly butremains isolated from noise caused by the video head and the drive.The MCE 72 is powered by a standard 1.5 V battery (AA-size). An LEDindicates when the battery needs to be replaced. The plug-in cable enablesthe connectors on the MCE 72 to be changed quickly.
Features • Stereo microphone for XY-recordings• Two condenser capsules (back-electret)
with cardioid polar pattern• Angular width 120° (± 60° off the microphone axis)• Rugged metal housing• Battery powered (1.5 V battery)• Battery indicator LED• Plug-in connecting cable (5-pin XLR)
Applications• Interviewing• Video• Live recording
MCE 72
Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 60 - 20,000 HzRecording . . . . . . . . . . . . . . . . . . . . . XY stereophonyPolar pattern . . . . . . . . . . . . . . . . . . . 2 x cardioid, principal axis angle 120°Open ciruit voltage at 1 kHz . . . . . . . 12 mV/Pa Nominal impedance . . . . . . . . . . . . . 180 ΩLoad impedance . . . . . . . . . . . . . . . . > 1 kΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 123 dBSignal-to-noise ratio rel. to 1 Pa. . . . . Approx. 60 dBA-weighted equivalent SPL . . . . . . . . Approx. 26 dBPower supply. . . . . . . . . . . . . . . . . . . 1.5 V battery (Mignon AA)Current consumption . . . . . . . . . . . . 12 mAOperating time with battery type LR 6 (2300 mAh) . . . . . . Approx. 75 hoursOutput . . . . . . . . . . . . . . . . . . . . . . . Unbalanced, capacitor decoupledConnection . . . . . . . . . . . . . . . . . . . . 5-pin XLR-male
Pin 1 = ShieldPin 2 = AF- leftPin 3 = not connectedPin 4 = AF- rightPin 5 = not connected
Dimensions . . . . . . . . . . . . . . . . . . . . Length: 196 mmDiameter: 25 mm
Weight (without battery) . . . . . . . . . . 175 g
VersionsMCE 72 With MKV 108 microphone clamp and
MVK 82-K3 cable. . . . . . . . . . . . . . . . . Order # 465.461MCE 72 CAM With EA 86 for mounting onto a
“hot shoe”, WS 72 windscreen andMVK 72-K3 cable. . . . . . . . . . . . . . . . . Order # 470.635
Optional AccessoriesMVK 72-K3 Cable with 5-pin XLR-female and
stereo mini jack (3.5 mm), 0.35 m . . . . Order # 470.643MVK 82-K3 Cable with 5-pin XLR-female and
stereo mini jack (3.5 mm), 2.5 m . . . . . Order # 450.949EA 19/25 Elastic suspension with
MKV 11 microphone clamp . . . . . . . . . Order # 407.194EA 86 Elastic suspension with
BS 86 flash holder . . . . . . . . . . . . . . . . Order # 407.186MKV 8 Microphone clamp,
for shaft diameter of 22 - 32 mm. . . . . Order # 407.216WS 72 Windscreen, small, charcoal-grey . . . . . Order # 565.016WS 101 Windscreen, charcoal-grey . . . . . . . . . . Order # 111.244MAV 800 Clip 3/8" for hanging installation
(from the ceiling) of microphones. . . . . Order # 448.133WJ 72 Windjammer for MCE 72,
hair length 40 mm . . . . . . . . . . . . . . . . Order # 475.645WJ 930 Windjammer, additional windscreen fits
to WS 53 and WS 72, hair length 40 mm . . . . . . . . . . . . . . . . Order # 490.903
STEREO MICROPHONESwww.beyerdynamic.com
Frequency response curve ±2.5 dB 0 dB = 12 mV/Pa MCE 72
STEREO MICROPHONESwww.beyerdynamic.com18
MCE 82Stereo Condenser Microphone Order # 450.588
The MCE 82 is a stereo microphone for XY-recording.It is suitable for stereo recording in ENG/EFP applications, reporting, film, video, interviewing, and home recording.The MCE 82 has two condenser capsules with cardioid polar patterns, which are mounted at an angle of ± 45° of the microphone axis. This allows a wide recording range and an accurate reproduction of the sound source. The MCE 82 hasa flat linear frequency response for neutral miking with the highest sound quality.Due to its compact and rugged metal housing, the MCE 82 is an ideal microphone for mobile applications. The elastic suspen-sion of the condenser capsules suppresses handling and cablenoise. A switchable bass filter eliminates wind noise and rumble.The MCE 82 can be operated with any phantom supplybetween 12 and 48 V. If phantom supply is not available, theMCE 82 can also be powered by a 1.5 V battery. A LED indicatesbattery condition.
Features• Stereo microphone for XY-recordings• Two condenser capsules (back-electret)
with cardioid polar pattern• Angular width 90° (± 45° of the microphone axis)• Elastic transducer suspension system• Switchable bass roll-off• Battery or phantom powered• LED indicator for battery condition• Rugged metal housing
Applications• Interviewing• Video• Live recording
MCE 82
Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradientFrequency response (linear) . . . . . . . . 50 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . 2x cardioid, principal axis angle 90°Open circuit voltage . . . . . . . . . . . . . 7.9 mV/Pa (= - 42 dBV)Nominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . > 1,000 ΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 128 dBS/N ratio . . . . . . . . . . . . . . . . . . . . . . 62 dB Power supply. . . . . . . . . . . . . . . . . . . 12 - 48 V phantom power or
battery 1.5 V (type LR 6/AA)Current consumption . . . . . . . . . . . . Phantom: approx. 3 mA per channel
battery: approx. 25 mAOutput . . . . . . . . . . . . . . . . . . . . . . . BalancedConnection . . . . . . . . . . . . . . . . . . . . 5-pin XLR male
Pin 1: groundPin 2: L +, pin 3: L -Pin 4: R +, pin 5: R -
Dimensions . . . . . . . . . . . . . . . . . . . . Length: 220 mmShaft diameter: 27/38 mmHead diameter: 51 mm
Weight without battery and cable . . . 205 g
Supplied AccessoriesBattery 1.5 V (Type Mignon AA/LR 6)MVK 82-N(CM) Connecting cable with 5-pin XLR-female
to 2x 3-pin XLR-male, 2.5 m . . . . . . . . Order # 448.966 MKV 11 Microphone clamp
for shaft diameter 32 - 42 mm . . . . . . . Order # 407.232BS 86 Set for flash holder . . . . . . . . . . . . . . . Order # 460.370
Optional AccessoriesMVK 72-K3 Cable with 5-pin XLR-female and
stereo mini jack (3.5 mm), 0.35 m . . . . Order # 470.643MVK 82-K3 Cable with 5-pin XLR-female and
stereo mini jack (3.5 mm), 2.5 m. . . . . . Order # 450.949WJ 82 Windjammer for MCE 82,
hair length 40 mm . . . . . . . . . . . . . . . . Order # 475.637
Frequency response curve ±2.5 dB 0 dB = 7.9 mV/Pa MCE 82
SPECIAL MICROPHONESwww.beyerdynamic.com19
MPC 70 USBCondenser Boundary Microphone Order # 475.548
The MPC 70 USB has been developed for connection to PCs with a USB port (type B). It canbe used for digital audio recordings on PCs and is ideal for recording conferences, meetingsor round table discussions. Depending on the application, you can choose between threeoperating modes: On/Off, Push To Talk or Push To Mute. Furthermore, the frequency responsecan be tailored for use in two modes: linear or 150 Hz bass roll-off to reduce low-frequencynoise. The switchable gain is to compensate loud or quiet speakers and small or large distances between microphone and speaker. The microphone is switched on and off with a silent film button. A red LED indicator shows the ready-to-talk status. The detachable cableis 3 m long and therefore long enough to place the microphone on a conference table.
Option:steno-s Conference & Recording Software for PC under Windows XP®
For more information please visit www.steno-s.com
MCE 494Condenser Microphone Order # 465.577
The MCE 494 is a cardioid condenser microphone intended for direct connection to notebooks, mobile DAT and MD recorders. The microphone is powered from the microphone input of the connected device. Due to its cardioid polar pattern, the MCE 494 has high gain-before-feedback(PC loudspeaker) and rejects background sounds such as drive noise. The wide frequency response gives clear and precise voice reproduction with high intelligibility.
Features• Cardioid polar pattern• Direct powering• Unobtrusive design• High-quality voice reproduction• Excellent noise rejection
Applications• Teleconferencing with notebook• Speech recognition• Interviewing
MCE 494
Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradientPolar pattern . . . . . . . . . . . . . . . . . . . CardioidFrequency response. . . . . . . . . . . . . . 30 - 18,000 Hz (close miking)Open circuit voltage . . . . . . . . . . . . . approx. 20 mV/PaNominal impedance . . . . . . . . . . . . . approx. 2 kΩLoad impedance . . . . . . . . . . . . . . . . > 10 kΩMax. SPL at f = 1 kHz,k = 1%, R = 1 k . . . . . . . . . . . . . . . . 120 dBSignal-to-noise ratio at 1 Pa. . . . . . . . 60 dBA-weighted equivalent SPL . . . . . . . . 26 dBConnection . . . . . . . . . . . . . . . . . . . . mini stereo jack (3.5 mm)
(L and R bridged)Dimensions . . . . . . . . . . . . . . . . . . . . Length: 45 mm / Ø: 13.5 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 6.5 g
Optional AccessoriesWS 20 SW Windscreen for MCE 494, black . . . . . . Order # 439.975
MPC 70 USB
Frequency response. . . . . . . . . . . . . . 40 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Half-sphericalOpen circuit voltage . . . . . . . . . . . . . -18 dBFS at 1 Pa/1kHzNominal impedance . . . . . . . . . . . . . 180 ΩMax. SPL . . . . . . . . . . . . . . . . . . . . . . 112 dBSupply voltage. . . . . . . . . . . . . . . . . . 5 V via USB connectionCurrent consumption . . . . . . . . . . . . max. 27 mAConnection . . . . . . . . . . . . . . . . . . . . USB socket, type BDimensions (L x W x H) . . . . . . . . . . . 125 x 76 x 25 mmWeight without cable . . . . . . . . . . . . 140 g
Supplied AccessoriesConnecting cable with USB connector, type B, 3 m
Frequency response curve ±2.5 dB 0 dB = 6 mV/Pa MCE 494
Frequency response curve ±2.5 dB Measuring 1 m 0 dB = 18 dBFS/1 Pa MPC 70 USB
SHOTGUN MICROPHONESwww.beyerdynamic.com20
Features• High sensitivity• Excellent off-axis rejection• Rugged yet lightweight design• Non-glare durable polymer coating
Applications• Professional cameras • Camcorder, DAT, MD recorders• Interviewing• Multipurpose halls• Lecterns• Miking choirs
MCE 86 S II MCE 86 II EA 19/25 + MKV 11
MCE 86 IIShotgun Condenser Microphone
The MCE 86 II shotgun microphones can be used for video recordings, lecterns ortheatre applications. The microphones are extremely light and rugged and thereforeideal for mounting onto cameras or camcorders. They can be used for outdoor applications and in studios with fish pole booms or as handhelds.The electrostatic transducer element and the hypercardioid/lobe polar pattern resultin an excellent polar pattern with high sensitivity. Due to its construction and integra-ted active filter the microphone is insensitive towards wind and vibrations caused byzoom motors. Each sound source is reproduced absolute clearly. The MCE 86 II can be powered from balanced phantom source. If phantom power isnot available the MCE 86 II S version should be used. This microphone can be phan-tom powered or battery powered with an integrated 1.5 V battery. The MCE 86 S IIcan also be connected to unbalanced XLR or mini jack inputs. It is powered by an 1.5 V battery. Each MCE 86 II version has an electronic balanced output, allowing the operation with long cables.All battery powered versions have an On/Off switch and battery condition LED. The average battery expectancy is 80 hours. There are two different elastic suspensions available suppressing footfall sound or vibrations of zoom motors. The EA 86 elastic suspension can be mounted directly onto the camera. At its bottomthe EA 86 has a 3/8" internal thread for the mounting on stands or fish pole booms.The flash-holder adapter BS 86 allows optimal positioning on every camera.The EA 19/25 is supplied with the MKV 11 microphone clamp and enables the mounting on standard stands or fish pole booms with 3/8"thread.The special camera set MCE 86 S II CAM includes an elastic suspension EA 86 withBS 86, a foam windscreen WS 716 and a short connecting cable for direct cameramounting, an ideal solution for consumer cameras.
MCE 86 S II CAM
SHOTGUN MICROPHONESwww.beyerdynamic.com21
Optional AccessoriesBS 86 Set for flash-holder . . . . . . . . . . . . . . . . . . . . Order # 460.370EA 19/25 Elastic suspension for 3/8" stand mount . . . . Order # 407.194EA 86 Elastic suspension for camera mount. . . . . . . Order # 407.186MKV 8 Microphone clamp for shaft
diameter 22-32 mm . . . . . . . . . . . . . . . . . . . Order # 407.216MVK N(C)-K3 Connecting cable XLR-stereo mini jack
(3.5 mm Stereo), 1.5 m . . . . . . . . . . . . . . . . Order # 406.813MVK 86-K3 Connecting cable XLR-stereo mini jack
(3.5 mm), 0.35 m . . . . . . . . . . . . . . . . . . . . . Order # 479.268MWK N(C)-K3 Coiled cable XLR-stereo mini jack
(3.5 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 415.642MZA 716 Fishpole boom incl. MZG 2,
0.96 - 3.15 m . . . . . . . . . . . . . . . . . . . . . . . Order # 140.848MZA 717 Fishpole boom, 0.61 - 1.59 m . . . . . . . . . . . . Order # 400.807MZA 718 Fishpole boom, 0.93 - 3.20 m . . . . . . . . . . . . Order # 406.260WS 716 Windscreen, charcoal grey . . . . . . . . . . . . . . Order # 134.538WJ 86 Windjammer (additional windscreen)
for WS 716 with 40 mm Hair length . . . . . . . Order # 475.629EAP MEDIUM Elastic suspension (medium) for MCE 86,
MCE 86 II and MC 836 incl. pistolgrip. . . . . . Order # 477.796KWS 4 Windscreen zeppelin-type for MC 836 . . . . . Order # 477.753KWS EXT 1 Extension for Windscreen KWS 4 necessary
to fit for MCE 86/87, MCE 86 II . . . . . . . . . . Order # 477.761WJ 5 Windjammer, additional Windscreen for
KWS 4 with KWS EXT 1 fits to MCE 86/87, MCE 86 II . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.834
KWS 5 KIT Windscreen kit consisting of EAP MEDIUM, KWS 4, KWS EXT 1 and WJ 5 for MCE 86/87,MCE 86 II . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.869
MCE 86 II + WS 716 MCE 86 II + WS 716 + WJ 86WJ 86
MCE 86 II
Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret) Operating principle . . . . . . . . . . . . . . Pressure gradient Polar pattern . . . . . . . . . . . . . . . . . . . Hypercardioid / LobeFrequency response. . . . . . . . . . . . . . 50 - 18,000 Hz Open circuit voltage at 1 kHz
(0 dB = 1 V/Pa) . . . . . . . . . . . . . . . 30 mV/Pa Nominal impedance . . . . . . . . . . . . . 150 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1 kΩMax. SPL at f = 1kHz,
k ≥ 1%, R = 1kΩ . . . . . . . . . . . . . 128 dBSignal-to-noise ratio rel. to 1 Pa. . . . . > 61 dB Supply voltage. . . . . . . . . . . . . . . . . . 1.5 V Battery /
11 - 52 V phantom powerDimensions:
Length. . . . . . . . . . . . . . . . . . . . . 253 mm (MCE 86 II) / 310 mm (MCE 86 S II)
Diameter . . . . . . . . . . . . . . . . . . . 25/21 mmWeight without cable and plug . . . . . 92 g (MCE 86 II) /
120 g (MCE 86 S II)
VersionsMCE 86 II Condenser shotgun microphone for
phantom power incl. EA 19/25 elastic suspension and MKV 11 clamp . . . . . . . Order # 476.595
MCE 86 S II Condenser shotgun microphone for phantom or battery power incl. EA 19/25elastic suspension and MKV 11 clamp . . Order # 476.609
MCE 86 S II CAMCondenser shotgun microphone for phantom or battery power incl. EA 86 elastic suspension and BS 86 for camera mount, short cable XLR-stereo mini jack (3.5 mm) and WS 716 windscreen . . . . . Order # 476.617
Frequency response curve ±2.5 dB 0 dB = 4.2 mV/Pa MCE 86 II
Frequency response curve ±2.5 dB 0 dB = 30 mV/Pa MC 836
Frequency response curve ±2.5 dB 0 dB = 30 mV/Pa MC 837
MC 836 / MC 837Shotgun Condenser Microphones
The rugged and lightweight MC 836 and MC 837 shotgun microphoneshave been designed to meet the demands of ENG and EFP applications.Due to their acoustical characteristics they are also suited for filmapplications. The directional polar pattern helps to suppress lateral andbackground noise.Both microphones operate according to the pressure gradient/linetransducer technique. A switchable low frequency roll-off eliminates unwanted low frequencies at a cut-off frequency of 90 Hz. An integratedfootfall sound insulation avoids the transmission of noise below 40 Hz. To avoid wind noise when used outdoors, a windscreen must be used. Both microphones can be operated with a phantom power supply of 11 - 52 V.
Features• Lobe/cardioid polar pattern (MC 836)• Lobe polar pattern (MC 837)• Very wide frequency response• Low frequency roll-off switch• Phantom power supply 11 - 52 V
Applications• Interviewing• Film recording• Live recording
MC 837 MC 836
SHOTGUN MICROPHONESwww.beyerdynamic.com22
MC 836 / MC 837Type . . . . . . . . . . . . . . . . . . . . . . . . . MC 836 MC 837 Transducer type. . . . . . . . . . . . . . . . . Condenser CondenserOperating principle . . . . . . . . . . . . . . Pressure gradient/ Pressure gradient/
line transducer technique line transducer techniquePolar pattern . . . . . . . . . . . . . . . . . . . Lobe/cardioid LobeFrequency response. . . . . . . . . . . . . . 40 - 20,000 Hz 40 - 20,000 HzSupply voltage. . . . . . . . . . . . . . . . . . 11-52 V phantom power 11-52 V phantom powerCurrent consumption . . . . . . . . . . . . 4.3 mA 4.3 mAOpen circuit voltage . . . . . . . . . . . . . 30 mV/Pa 30 mV/PaNominal impedance . . . . . . . . . . . . . 180 Ω 180 ΩLoad impedance . . . . . . . . . . . . . . . . 1,000 Ω 1,000 ΩMax. SPL . . . . . . . . . . . . . . . . . . . . . . > 130 dB SPL > 130 dB SPLEquivalent nominal SPL . . . . . . . . . . . Approx. 13 dB Approx. 13 dBConnection . . . . . . . . . . . . . . . . . . . . 3-pin XLR mod. 3-pin XLR mod.
2 = +, 3 = -, 1 = ground 2 = +, 3 = -, 1 = groundDimensions: Diameter . . . . . . . . . . . 21 mm 21 mm
Length . . . . . . . . . . . . 248 mm 516 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 116 g 218 g
VersionsMC 836 PV Shotgun microphone, condenser, lobe/cardioid . . . . . . . . . . . . . . . . . Order # 448.907MC 837 PV Shotgun microphone, condenser, lobe. . . . . . . . . . . . . . . . . . . . . . . . Order # 448.915
Optional AccessoriesMSG 248.1 Mains power supply unit for two microphones
for balanced and unbalanced inputs . . . . . . . . . . . . . . . . . . . . . . . . . Order # 100.943MZA 716 Fishpole boom incl. MZG 2, 0.96 - 3.15 m. . . . . . . . . . . . . . . . . . . . . Order # 140.848MZA 717 Fishpole boom, 0.61 - 1.59 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 400.807MZA 718 Fishpole boom, 0.93 - 3.20 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 406.260WS 716 Windscreen, charcoal-grey, for MC 836 . . . . . . . . . . . . . . . . . . . . . . . Order # 134.538WS 717 Windscreen, charcoal-grey, for MC 837 . . . . . . . . . . . . . . . . . . . . . . . Order # 134.511SWS 86 Softie incl. pistol grip for MC 836 . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 421.278EAP MEDIUM Elastic suspension (medium) for MCE 86, MCE 86 II and MC 836
incl. pistolgrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.796EAP LARGE Elastic suspension (large) for MC 837 incl. pistolgrip . . . . . . . . . . . . . Order # 477.818KWS 4 Windscreen zeppelin-type for MC 836 . . . . . . . . . . . . . . . . . . . . . . . Order # 477.753KWS EXT 4 Extension for Windscreen KWS 4 necessary to fit for MC 837 . . . . . . Order # 477.788KWS 4 KIT Windscreen kit consisting of EAP MEDIUM, KWS 4 and
WJ 4 for MC 836. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.850KWS 8 KIT Windscreen kit consisting of EAP MEDIUM, KWS 4, KWS EXT 4
and WJ 8 for MC 837 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.877WJ 4 Windjammer, additional Windscreen for KWS 4 fits to MC 836 . . . . . Order # 477.826WJ 8 Windjammer, additional Windscreen for KWS 4 with KWS EXT 4
fits to MC 837. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.842
SHOTGUN MICROPHONESwww.beyerdynamic.com23
EAP MEDIUM MC 836 withEAP MEDIUM
NECKWORN MICROPHONESww.beyerdynamic.com24
Opus 54Neckworn Microphone
The Opus 54 has been designed for ”hands free“ applications that require a high quality andlightweight microphone. It is ideal for entertainers, dancers, drummers and keyboard playersetc. The Opus 54 will interface with all beyerdynamic wireless systems to provide a low profileneckworn microphone for aerobics instructors, theatre use and stage musicals.Its cardioid polar pattern allows a high gain-before-feedback, essential when high levels offoldback are used on stage. The Opus 54 features a rugged yet adjustable neckband andflexible ear bows that can be shaped for personal comfort with a secure fit. The Opus 54 isalso suited for people who wear glasses.
Features• Cardioid polar pattern• High gain-before-feedback• Lightweight, adjustable neckband• Angled microphone head• Slim, flexible gooseneck for optimum positioning• Rugged ”flexible” ear bows of sprung steel
Applications• Vocals• Speech
Opus 54
measured with CV 3 pre-amp unit (3-pin connection)Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradientPolar pattern . . . . . . . . . . . . . . . . . . . CardioidFrequency response. . . . . . . . . . . . . . 40 - 17,000 Hz (close miking)Open circuit voltage . . . . . . . . . . . . . 6 mV/PaNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1 kΩMax. SPL at f = 1 kHz,k = 1%, R = 1 kΩ . . . . . . . . . . . . . . . 132 dBS/N ratio rel. to 1 Pa . . . . . . . . . . . . . 60 dBA-weighted equivalent SPL . . . . . . . . 26 dBSupply voltage. . . . . . . . . . . . . . . . . . 1.5 to 10 VWeight without cable . . . . . . . . . . . . 39 g
The specs for the Opus 54 depend on the connector the customer will use.
VersionsOpus 54.09 BLK Neckworn microphone, black
cable with free ends . . . . . . . . . . . . . . . Order # 460.419Opus 54.09 SC same as above, beige . . . . . . . . . . . . . . Order # 474.924Opus 54.16/2 black, with 4-pin LEMO-connector,
for TS 316 and TSP 200/300/380/400. . Order # 470.279Opus 54.16/3 same as above, but with 4-pin LEMO-
connector, for CV 3 and TS 500 . . . . . . Order # 460.184Opus 54.18 BLK black, with 4-pin mini-XLR connector,
for TS 100 Mk II, TS 300, TS 800 (M),TS 900 C, TS 900 M and CV 18 . . . . . . Order # 464.945
Opus 54.18 SC same as above, beige . . . . . . . . . . . . . . Order # 474.223Opus 54.100 black, with 3.5 mm stereo phone plug
with screw for TS 100 and TS 200 . . . . Order # 458.511
Supplied AccessoriesWS 20 Windscreen, black or whiteZKK 834-19 Padded plastic case, black . . . . . . . . . . Order # 393.371
Optional AccessoriesCV 3 Phantom power supply adaptor . . . . . . Order # 466.891ZCV Battery compartment for CV 3 . . . . . . . Order # 451.096CV 18 Phantom power supply adaptor . . . . . . Order # 475.378WS 20 SW Windscreen, black . . . . . . . . . . . . . . . . Order # 439.975WS 20 WS Windscreen, white . . . . . . . . . . . . . . . . Order # 439.983
Frequency response curve ±2.5 dB 0 dB = 6 mV/Pa Opus 54
NECKWORN MICROPHONESww.beyerdynamic.com25
Opus 55 Mk IINeckworn Microphone
The Opus 55 Mk II is designed to suit all applicationswhich call for high quality, lightweight and low profile microphone which leaves the hands free. The new neckband construction gives the possibilityto mount the microphone either on the left or onthe right side. The microphone length is variable foroptimum positioning on different head sizes. The foldable construction of the Opus 55 Mk II allows aminimized transport size. The microphone capsule iswater resistant also against sweat. The Opus 55 Mk II is suitable for wireless applicationssuch as theatre, musical, sports, presentation andeducation.
Features• High-performance microphone• Water resistant microphone capsule• Adjustable lightweight microphone gooseneck• Can be mounted on the left or on the right side• Rugged and flexible neckband contruction• Foldable ear bows for easy transport• Versions available for wireless transmitters• Available in black and beige
Applications• Vocals• Speech
Opus 55 Mk II
measured with CV 18 pre-amp unit (2-pin connection)Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradientPolar pattern . . . . . . . . . . . . . . . . . . . OmnidirectionalFrequency response. . . . . . . . . . . . . . 20 - 20,000 HzOpen circuit voltage . . . . . . . . . . . . . 4.5 mV/PaNominal impedance . . . . . . . . . . . . . 1 kΩMax. SPL at f = 1 kHz,k ≤ 1%, R = 1 kΩ . . . . . . . . . . . . . . . 130 dBSignal-to-noise ratio rel. to 1 Pa. . . . . 56 dBSupply voltage. . . . . . . . . . . . . . . . . . 1.5 to 9 VConnection . . . . . . . . . . . . . . . . . . . . 4-pin Mini XLR plug (Opus 55.18 Mk II)
or with free ends (Opus 55.09 Mk II)Dimensions:
Head diameter . . . . . . . . . . . . . . 5.2 mmLength. . . . . . . . . . . . . . . . . . . . . 13 mm
Cable length . . . . . . . . . . . . . . . . . . . 1.2 mWeight:
Without cable / plug . . . . . . . . . . 16 gWith cable / plug. . . . . . . . . . . . . 24 g
The specs for the Opus 55 Mk II depend on the connector the customer will use.
VersionsOpus 55.09 Mk II BLK
Neckworn condenser microphone (omnidirectional), black, waterproof,cable with free ends . . . . . . . . . . . . . . . Order # 475.556
Opus 55.09 Mk II SCsame as above, beige . . . . . . . . . . . . . . Order # 475.564
Opus 55.18 Mk II BLKsame as above, black, with 4-pin mini-XLR connector for TS 100 Mk II, TS 300, TS 800 (M), TS 900 C, TS 900 M and CV 18 . . . . . . . . . . . . . . . Order # 475.394
Opus 55.18 Mk II SCsame as above, beige . . . . . . . . . . . . . . Order # 475.386
Supplied AccessoriesWS 55 Windscreen, black or beige
Optional AccessoriesCV 18 Pre-amp for phantom power . . . . . . . . Order # 475.378WS 55 SW Windscreen, black (pack of 4) . . . . . . . . Order # 468.975WS 55 SC Windscreen, beige (pack of 4) . . . . . . . . Order # 479.204
Frequency response curve ±2.5 dB 0 dB = 4.5 mV/Pa Opus 55 Mk II
LAVALIERE MICROPHONESwww.beyerdynamic.com26
MCE 5Condenser Microphone
The omnidirectional MCE 5 clip-on microphone has been designed for the miking of speech and instruments, especially in broadcasting, film andstage applications. It comes with a small detachable wire mesh windscreenfor outdoor applications and the WS 5 foam windscreen for miking instru-ments. The MCE 5 can be used with different devices. In addition to the use withamplifiers and recorders, this microphone is well suited for the connectionto beyerdynamic’s wireless systems.
Features• Wide frequency range and natural response• Omnidirectional polar pattern• Studio quality• Small and unobtrusive design• Quickly interfaceable to wireless bodypack transmitters and
other devices• Battery or phantom power
Applications• Speech• Instruments
MCE 5
measured with CVU 16 pre-amp unit (2-pin connection)Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . PressureFrequency response. . . . . . . . . . . . . . 35 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . OmnidirectionalOpen circuit voltageat 1 kHz (0 dB = 1 V/Pa) . . . . . . . . . . 18 mV/Pa (+6 dB)Nominal impedance . . . . . . . . . . . . . 200 Ω sym.Load impedance . . . . . . . . . . . . . . . . ≥ 1 kΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 122 dBSignal-to-noise ratio rel. 1 Pa. . . . . . . 60 dBA-weighted equivalent SPL . . . . . . . . 26 dBSupply voltage. . . . . . . . . . . . . . . . . . 1.5 to 10 VDimensions . . . . . . . . . . . . . . . . . . . . Length: 26 mm
Shaft diameter: 7 mmCable length . . . . . . . . . . . . . . . . . . . 1.35 m
The specs for the MCE 5 depend on the connector the customer will use.
VersionsMCE 5.09 black, cable with free ends . . . . . . . . . . Order # 248.495MCE 5.18 black, with 4-pin mini-XLR
connector for TS 100 Mk II, TS 300, TS 800 (M), TS 900 C, TS 900 M and CV 18 . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 471.879
Supplied AccessoriesMKV 5 Microphone clamp, black. . . . . . . . . . . . Order # 453.994PS 5 Pop shield, black . . . . . . . . . . . . . . . . . . Order # 219.045WS 5 Polyurethane foam windshield,
charcoal-grey. . . . . . . . . . . . . . . . . . . . . Order # 275.603
Optional AccessoriesMGH 5 Mount for violin. . . . . . . . . . . . . . . . . . . Order # 219.037MFH 5 Mount for flute . . . . . . . . . . . . . . . . . . . Order # 275.298MMH 5 Magnetic holder for 1 microphone . . . . Order # 440.442CV 18 Pre-amplifier for phantom power. . . . . . Order # 475.378
Frequency response curve ±2.5 dB 0 dB = 18 mV/Pa MCE 5
LAVALIERE MICROPHONESwww.beyerdynamic.com27
MCE 55 Miniature Lavaliere Microphone
The MCE 55 is an extremely small clip-on microphone to suit all applications which call for high quality, low profile and unobtrusive design. Its omnidirectional polar pattern reduces popping and handling noise. The microphone capsule is water resistant also against sweat, it can be attached to clothing via its clip MKV 55. Due its small size, the microphone can behidden in the hair or in make up for theatre applications. The MCE 55 is suitable for wired and wireless applications such as theatre, musical, presentation and education.
Features• High-performance microphone• Extremely small dimensions• Water resistant microphone capsule• Insensitive to popping and handling noise• Versions available for wireless transmitters• Available in black and beige
Applications• Vocals• Speech
MCE 55
measured with CV 18 pre-amp unit (2-pin connection)Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradientPolar pattern . . . . . . . . . . . . . . . . . . . OmnidirectionalFrequency response. . . . . . . . . . . . . . 20 - 20,000 HzOpen circuit voltage at 1 kHz . . . . . . 4.5 mV/Pa Nominal impedance . . . . . . . . . . . . . 1 kΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 130 dBSignal-to-noise-ratio.rel. to 1 Pa . . . . 56 dBSupply voltage. . . . . . . . . . . . . . . . . . 1.5 to 9 VDimensions:
Head diameter . . . . . . . . . . . . . . 5.2 mmLength. . . . . . . . . . . . . . . . . . . . . 13 mm
Cable length . . . . . . . . . . . . . . . . . . . 1.2 mWeight:
Without cable / plug . . . . . . . . . . 1 gWith cable / plug. . . . . . . . . . . . . 9 gClip . . . . . . . . . . . . . . . . . . . . . . . 3 g
The specs for the MCE 55 depend on the connector the customer will use.
VersionsMCE 55.09 BLK
Mini condenser lavaliere microphone (omnidirectional), black, waterproof,cable with free ends . . . . . . . . . . . . . . . Order # 475.572
MCE 55.09 SC same as above, beige . . . . . . . . . . . . . . Order # 475.558MCE 55.18 BLK
same as above, black, with 4-pin mini-XLR connector for TS 100 Mk II, TS 300, TS 800 (M), TS 900 C, TS 900 M and CV 18. . . . . . . . . . . . . . . . . . . . . . . Order # 475.408
MCE 55.18 SC same as above, beige . . . . . . . . . . . . . . Order # 475.416
Supplied AccessoriesMKV 55 Microphone clamp, black or beigeWS 55 Windscreen, black or beige
Optional AccessoriesCV 18 Pre-amplifier for phantom power. . . . . . Order # 475.378MKV 55 BLK Microphone clamp, black. . . . . . . . . . . . Order # 470.511MKV 55 SC Microphone clamp, beige . . . . . . . . . . . Order # 480.479WS 55 SW Windscreen, black (pack of 4) . . . . . . . . Order # 468.975WS 55 SC Windscreen, beige (pack of 4) . . . . . . . . Order # 479.204
MCE 55.09
MCE 55.18
Frequency response curve ±3 dB 0 dB = 4.5 mV/Pa MCE 55
LAVALIERE MICROPHONESwww.beyerdynamic.com28
MCE 10Hypercardioid Condenser Microphone
The MCE 10 is a hypercardioid clip-on microphonedesigned for unobtrusive miking of speech andinstruments. It has many uses in broadcast, theatre or for presentation purposes. The MCE 10 is available in various versions for cable boundapplications or for interfacing with wireless systems.The MCE 10 condenser microphone has a smoothand wide frequency response and a hypercardioidpolar pattern ensures high gain-before-feedbackwhen in stage applications or public address systems.
Features• Wide range frequency response• Hypercardioid polar response provides excellent
gain-before-feedback• Extremely small size• Easily interfaces with wireless bodypack transmitters• Lavaliere or instrument mounting capabilities
Applications• Vocals• Speech• Instruments
MCE 10
measured with CVU 16 pre-amp unit (2-pin connection)Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradient Frequency response. . . . . . . . . . . . . . 40 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . HypercardioidOpen circuit voltageat 1 kHz (0 dBV = 1V/Pa) . . . . . . . . . . 30 mV/Pa = -30 dBVNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1 kΩMax. SPL at 1 kHz for k = 1% . . . . . . 120 dBS/N ratio rel. to 1 PA . . . . . . . . . . . . . 60 dBA-weighted equivalent SPL . . . . . . . . Approx. 26 dBSupply voltage. . . . . . . . . . . . . . . . . . 1.5 to 10 VDimensions . . . . . . . . . . . . . . . . . . . . Length: 21 mm
Head diameter: 9 mmWeight (without cable and plug) . . . . 15 g
The specs for the MCE 10 depend on the connector the customer will use.
VersionsMCE 10.09 black, with free ends . . . . . . . . . . . . . . . Order # 403.334MCE 10.16 black, with 4-pin Lemo-connector,
for TS 316, TS 500 and CVU 16. . . . . . . Order # 420.379MCE 10.18 black, with 4-pin mini-XLR-connector,
for TS 100 Mk II, TS 300, TS 800 (M), TS 900 C, TS 900 M and CV 18 . . . . . . . Order # 471.895
Supplied AccessoriesMKV 5 Microphone clamp. . . . . . . . . . . . . . . . . Order # 453.994PS 10 Pop shield . . . . . . . . . . . . . . . . . . . . . . . Order # 402.990WS 10 Windscreen (foam) . . . . . . . . . . . . . . . . Order # 403.008
Optional AccessoriesMFH 5 Microphone holder for flute. . . . . . . . . . Order # 275.298MGH 5 Microphone holder for violin . . . . . . . . . Order # 219.037CVU 16 Pre-amplifier for phantom power
(for .16 version) . . . . . . . . . . . . . . . . . . . Order # 451.088CV 18 Pre-amplifier for phantom power
(for .18 version) . . . . . . . . . . . . . . . . . . . Order # 475.378ZCV Battery compartment for CVU 16 . . . . . Order # 451.096
Frequency response curve ±2.5 dB 0 dB = 20 mV/Pa MCE 10
LAVALIERE MICROPHONESwww.beyerdynamic.com29
MCE 60Condenser Microphone
The MCE 60 has been designed for unobtrusive miking of speech and vocals. Therefore,it is suitable for film, TV and theatre applications. Its omnidirectional polar pattern reducespopping and its construction eliminates handling noise. The microphone attaches via amicrophone clip to clothing. Due to its small size, it can easily be concealed in the hair or in makeup for theatre applications. In addition to the use with amplifiers and recorders, thismicrophone is well suited for the connection to beyerdynamic’s wireless systems.
Features• Extended frequency response• Omnidirectional polar pattern, independent of frequency• High sensitivity• Lightweight• Battery or phantom powered
Applications• Vocals• Speech
MCE 60
measured with CVU 16 pre-amp unit (2-pin connection)Transducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . PressureFrequency response. . . . . . . . . . . . . . 25 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . OmnidirectionalOpen circuit voltage at 1 kHz . . . . . . 30 mVNominal impedance . . . . . . . . . . . . . ≤ 1 kΩLoad impedance . . . . . . . . . . . . . . . . ≥ 10 kΩMax. SPL at 1 kHz . . . . . . . . . . . . . . . 120 dBS/N ratio rel. to 1 Pa . . . . . . . . . . . . . Approx. 60 dBA-weighted equivalent SPL . . . . . . . . Approx. 26 dBDimensions . . . . . . . . . . . . . . . . . . . . Length: 12.3 mm
Head diameter: 7 mmSupply voltage. . . . . . . . . . . . . . . . . . 1.5 to 10 VWeight without cable . . . . . . . . . . . . 1.5 g
The specs for the MCE 60 depend on the connector the customer will use.
VersionsMCE 60.09 black, with free ends . . . . . . . . . . . . . . . Order # 463.051MCE 60.16 black, with 4-pin Lemo-connector,
for TS 316, TS 500 and CVU 16. . . . . . . Order # 463.078MCE 60.18 black, with 4-pin mini-XLR-connector,
for TS 100 Mk II, TS 300, TS 800 (M), TS 900 C, TS 900 M and CV 18 . . . . . . . Order # 469.548
Supplied AccessoriesMKV 7 BLK Microphone clamp, black. . . . . . . . . . . . Order # 453.978
Optional AccessoriesCVU 16 Pre-amplifier for phantom power
(for .16 version) . . . . . . . . . . . . . . . . . . . Order # 451.088CV 18 Pre-amplifier for phantom power
(for .18 version) . . . . . . . . . . . . . . . . . . . Order # 475.378ZCV Battery compartment for CVU 16 . . . . . Order # 451.096WS 55 Windscreen for MCE 60, black . . . . . . . Order # 468.975
Frequency response curve ±2.5 dB 0 dB = 34 mV/Pa MCE 60
WIRELESS SYSTEMSwww.beyerdynamic.com30
KE 800Camera Receiver (798 - 822 MHz) Order # 480.568Camera Receiver (850 - 874 MHz) Order # 481.564
The rugged, portable KE 800 UHF receiver has been designed for professional cameraapplications and can be operated easily and intuitively. The PLL-synthesised technologyensures a great frequency agility. The KE 800 has 100 pre-programmed frequencies and is ideal for the use with the transmitters of the Opus 300 wireless systems. With the „Auto Scan / ACT“ function the receiver searches for an interference-free frequencyto transmit it via infra red to the matching handheld or pocket transmitter and lock it in automatically. True diversity, the pilot tone recognition and an adjustable squelch ensure a safe reception, free from any noise and without signal dropouts even in the most unpredictable operating environments. The LC-display indicates the battery status (5-level) of the transmitter, frequency/ channel,squelch, AF and RF level. Due to the LOCK-function the KE 800 can be protected against inadvertently pressing of buttons. The extensive, optional available accessories turn the KE 800 into an universal applicable tool.
Features• Portable wireless receiver (UHF) for professional camera applications• Clear and stable reception without any dropouts• Compact and rugged aluminium casing• Automatic Scan and Frequency Setting function• Balanced audio output (4-pin mini XLR connector)• Low current consumption (< 70 mA)• SMA antenna connections (screw-in type) with removable soft antennaes• Universal applications due to extensive accessories
KE 800
Operating principle . . . . . . . . . . . . . . True Diversity receiver (UHF)Frequency range . . . . . . . . . . . . . . . . 798 - 822 MHz
850 - 874 MHzmore frequency bands on request
Frequencies . . . . . . . . . . . . . . . . . . . . 100 pre-programmed frequenciesper frequency range
Frequency response. . . . . . . . . . . . . . 50 - 18,000 HzStability . . . . . . . . . . . . . . . . . . . . . . . ± 0.005%Nominal deviation . . . . . . . . . . . . . . . ± 70 kHzT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.15%Squelch . . . . . . . . . . . . . . . . . . . . . . . Adjustable, 6 dBuV - 45 dBuV
(in 5 dB steps)S/N ratio . . . . . . . . . . . . . . . . . . . . . . 107 dBA (max.)Max. output voltage . . . . . . . . . . . . . Balanced, 2.2 V RMS
(without load impedance)Power supply. . . . . . . . . . . . . . . . . . . 6-18 VCurrent consumption . . . . . . . . . . . . 70 mADimensions (L x W x H) . . . . . . . . . . . 145 x 83 x 35 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 220 gAmbient temperature . . . . . . . . . . . . -10 to +60°C
Supplied Accessories KE 8002 antennaes2 protective caps for antenna connections2 audio cables
(4-pin mini XLR connection to 3-pin XLR plug; 1 x 14 cm, 1 x 95 cm)1 external power supply unit1 power cable with free ends
WIRELESS SYSTEMSwww.beyerdynamic.com31
Optional Accessories
KE 800-S15 Order # 480.576
Adapter plate 15-pin Sub-D, to connect the KE 800 to Sony Betacam® camera slots directly.There is no external power supply unit and no audio cable needed.
KE 800-S25 Order # 480.584
Adapter plate 25-pin Sub-D, to connect the KE 800 to IKEGAMI camera slots directly. There is no external power supply unit and no audio cable needed.
KE 800-SB Order # 480.592
Battery compartment for KE 800, 2 x 1.5 V batteries (AA). Replaces the external powersupply with cable. Ideal for all other camera types or active loudspeakers.
KE 800-SC Order # 480.606
For mounting the KE 800 onto the flash holder of camcorders.
MVK N(CF)-TA4F Order # 481.831
Adapter cable to connect wired microphones to pocket transmitters with 4-pin mini-XLR connector, 1.5 m (5 ft.).
WIRELESS SYSTEMSwww.beyerdynamic.com32
TS 300Pocket Transmitter (798 - 822 MHz) Order # 471.747Pocket Transmitter (850 - 874 MHz) Order # 471.755
The TS 300 pocket transmitter has been designed for multi-functional use such as theatre applications with a clip-on microphone or ENG applications (e.g. interviewing) with KE 800 camera receiver. Microphones or instruments are connected to the 4-pin mini-XLR input connector (plug-in and screw-type). Using the gain control, input signals can be matched to an optimum level. With an adapter cable it is also possible to feed in LINE signals.
For clip-on and neckworn microphones to connect to the pocket transmitter please refer to pages 24-29.
Features• Rugged plastic housing• ACT infra-red interface for frequency transmission from
camera receiver to transmitter• Gain control for input level adjustment• Silent On/Off switch• LED for battery status • Rotary clip to mount to belts or guitar straps• Operating time 15 hours or more
TS 300
Frequency range . . . . . . . . . . . . . . . . 798 - 822 MHz, 850 - 874 MHzmore frequency bands on request
Modulation . . . . . . . . . . . . . . . . . . . . FMNominal deviation . . . . . . . . . . . . . . . ± 40 kHzTransmitter power . . . . . . . . . . . . . . . > 10 mWGain . . . . . . . . . . . . . . . . . . . . . . . . . 10 mV - 0.3 V adjustableFrequency response. . . . . . . . . . . . . . 50 - 18,000 HzTransmission range . . . . . . . . . . . . . . > 100 mS/N ratio . . . . . . . . . . . . . . . . . . . . . . > 105 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.5% at 1 kHzPower supply. . . . . . . . . . . . . . . . . . . 1 x 9 V-block or rechargeable battery Operating time . . . . . . . . . . . . . . . . . Approx. 15 hours with batteriesDimensions . . . . . . . . . . . . . . . . . . . . 105 x 63 x 21 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 85 g
For further information to the wireless systems please visit our website www.beyerdynamic.com
Professional technology at very reasonable priceThe Opus 300 UHF wireless system from beyerdynamic offers professional technology at amateur prices. Many innovative features enhance both system reliability, and user friendliness. Equipped with the AutoScan/ACT function and 16 switchable, pre-programmed frequencies, the Opus 300 can be operated with up to 16 channels per frequency range without any interference. True diversity, the pilot tone recognition and an adjustable squelchguarantee for high quality reception without any “soughing“ noise. Opus 300 features legendary beyerdynamic audio quality. Six different sets are available. Each Opus 300 system is ready for use straight after switching it on, easy to handle and with various accessories itprovides a wide range of options for every situation.
ACT functionWhen the SCAN button is pressed, the receiver will scan the environment and stops automatically when a frequency is foundthat is free from interference. ACT button on the receiver provides rapid and precise frequency setting of the transmitter. It automatically locks the receiver and the transmitter into thesame operating frequency. This significantly reduces setup timein multi-channel systems.
WIRELESS SYSTEMSwww.beyerdynamic.com33
SDM 360 / SDM 369 / SEM 381
With the beyerdynamic handheld transmitters you acquire state-of-the-art wireless technologycombined with the legendary beyerdynamic-sound. Together with the KE 800 camera receiverthey are excellent for wireless speech transmission in interviewing applications.
• Rugged plastic housing• ACT infra-red interface for frequency transmission from camera receiver to transmitter• Adjustable input sensitity • Silent On/Off switch• LED for battery status • Operating time 15 hours or more
SDM 360 (798 - 822 MHz) Order # 476.668SDM 360 (850 - 874 MHz) Order # 476.676
Extraordinary powerful sound. The mass-reduced diaphragm made of Hostaphan® ensures excellent sound features. The elastic suspension of the TG-X 60 capsule reduces handling noise to a minimum.
SDM 369 (798 - 822 MHz) Order # 471.771SDM 369 (850 - 874 MHz) Order # 471.798
The handyman for vocals and speech. The SDM 360 handheld transmitter, fitted with the Opus 69 microphone capsule, is designed to give a clear and balanced sound. The supercar-dioid polar pattern ensures very high gain-before-feedback. The integrated pop shield suppresses handling noise successfully.
SEM 381 (798 - 822 MHz) Order # 471.828SEM 381 (850 - 874 MHz) Order # 471.836
The SEM 381 handheld condenser microphone features studio quality for live applications. Theintegrated Opus 81 capsule ensures an excellent sound with a warm bass, balanced mids andtransparent highs. Also suitable for miking speech in permanent installations.
SDM 360 / SDM 369 / SEM 381
Transducer type. . . . . . . . . . . . . . . . . Dynamic (SDM 360, SDM 369)Electret condenser (SEM 381)
Polar pattern . . . . . . . . . . . . . . . . . . . Hypercardioid (SDM 360)Supercardioid (SDM 369)Cardioid (SEM 381)
Frequency range . . . . . . . . . . . . . . . . 798 - 822 MHz, 850 - 874 MHzmore frequency bands on request
Modulation . . . . . . . . . . . . . . . . . . . . FMNominal deviation . . . . . . . . . . . . . . . ± 40 kHzTransmitter power . . . . . . . . . . . . . . . > 10 mWMicrophone sensitivity. . . . . . . . . . . . Switchable, internal switch (-10 dB)Frequency response. . . . . . . . . . . . . . 55 - 18,000 Hz (SDM 360)
65 - 16,000 Hz (SDM 369)70 - 20,000 Hz (SEM 381)
Transmission range . . . . . . . . . . . . . . > 100 mS/N ratio . . . . . . . . . . . . . . . . . . . . . . > 105 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.5% at 1 kHzPower supply. . . . . . . . . . . . . . . . . . . 1 x 9 V-block or rechargeable battery Operating time . . . . . . . . . . . . . . . . . Approx. 15 hours with batteriesDimensions:Length . . . . . . . . . . . . . . . . . . . . . . . 258 mm Shaft . . . . . . . . . . . . . . . . . . . . . . . . . 33/37 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 220 g (SDM 369),
230 g (SDM 369), 265 g (SEM 381)
SDM 360 SDM 369 SEM 381
These Opus 300 Wireless Sets are available
Opus 300 - Guitar Set
NE 300 S receiver + TS 300 pocket transmitter + MJ 41 G instrument cable
Opus 350 - Lavaliere Set
NE 300 S receiver + TS 300 pocket transmitter + MCE 60 lavaliere microphone (condenser, omnidirectional)
Opus 354 - Neckworn Set
NE 300 S receiver + TS 300 pocket transmitter + Opus 54 neckworn microphone (condenser, cardioid)
Opus 360 - Dynamic Vocal Set
NE 300 S receiver + SDM 360 handheld transmitter (dynamic, hypercardioid)
Opus 369 - Dynamic Vocal Set
NE 300 S receiver + SDM 369 handheld transmitter (dynamic, supercardioid)
Opus 381 - Condenser Vocal Set
NE 300 S receiver + SEM 381 handheld transmitter (condenser, cardioid)
WIRELESS SYSTEMSwww.beyerdynamic.com34
SE 900
Modulation/ osciallation . . . . . . . . . . FM stereo/ PLL synthesiserFrequency range . . . . . . . . . . . . . . . . 798 - 822 MHz, 842 - 866 MHz
more frequency bands on requestFrequencies . . . . . . . . . . . . . . . . . . . . 16 switchable, pre-programmed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UHF frequencies per band RF output power . . . . . . . . . . . . . . . . Min.: 10 mW
Max.: 100 mW (50 Ω Load)depending on country-specific regulations
Frequency range . . . . . . . . . . . . . . . . 50 - 15,000 HzNominal deviation . . . . . . . . . . . . . . . ± 40 kHzT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.5%Audio input. . . . . . . . . . . . . . . . . . . . 2 x combined socket,
XLR 1/4" jack (6.35 mm)Audio output . . . . . . . . . . . . . . . . . . 2 x 1/4" jack (6.35 mm) Headphone output . . . . . . . . . . . . . . 1/4" stereo jack (6.35 mm) with
adjustable volume,≥ 16 ΩAntenne output . . . . . . . . . . . . . . . . TNCPower supply . . . . . . . . . . . . . . . . . . DC Adapter 15 - 18 VDimensions . . . . . . . . . . . . . . . . . . . . 210 x 206 x 44 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 1.1 kg
TE 900
Modulation/ osciallation . . . . . . . . . . FM stereo/ PLL synthesiserReceiving sensitivity . . . . . . . . . . . . . . at 2 µV input level, S/N > 58 dB (Mono)Stereo channel separation . . . . . . . . . ≥ 45 dBSquelch . . . . . . . . . . . . . . . . . . . . . . . Adjustable 2 - 100 µVEarphone output . . . . . . . . . . . . . . . . Stereo mini jack (3.5 mm )Earphone impedance. . . . . . . . . . . . . ≥ 16 ΩPower supply. . . . . . . . . . . . . . . . . . . 2 x 1.5 V batteries (type AA)Current consumption . . . . . . . . . . . . Approx. 130 mAS/N ration . . . . . . . . . . . . . . . . . . . . . 94 dBAOperating time . . . . . . . . . . . . . . . . . Approx. 10 h with alkaline batteriesDimensions . . . . . . . . . . . . . . . . . . . . 105 x 65 x 25.5 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 105 g
SE 900Stereo Transmitter Unit (798 - 822 MHz) Order # 480.339Stereo Transmitter Unit (842 - 866 MHz) Order # 480.347
Features• Rugged 9,5" metal housing• 8 channels per frequency range can be used simultaneously and without
any interference• PLL-synthesised technology, pilot tone • Clear LC-Display (green / black) to indicate audio, channel/frequency
and name• Lock function to protect the system against faulty operation• Adjustable input gain, LED level indicator (5-level) for input signal• Mono/ stereo switch• Switchable, integrated limiter• Headphone output with volume control • Combined XLR / 1/4" jack (6.35 mm) connections
(balanced / unbalanced)• Removable TNC antenna
TE 900Stereo Pocket Receiver (798 - 822 MHz) Order# 480.398Stereo Pocket Receiver (842 - 866 MHz) Order# 480.312
Features• Lightweight, rugged metal casing (magnesium alloy) • PLL-synthesised technology• Pilot tone recognition • Adjustable squelch• Diversity reception (2 RF receiving antennas) to avoid signal dropouts• Display with numeric channel indication• LEDs for battery capacity and RF signal indication• Switchable, integrated limiter• Stereo mini jack socket for the connection of earphones• On/Off switch and volume control for earphone• Balance control• Operating time approx. 10 hours with 2 x 1.5 V alkaline batteries (Type AA)
In-Ear-Monitoring-System IMS 900Approved RF competence and wide experience with aural acoustical systems are basis forthe IMS 900 in-ear-monitoring-system. For a multifaceted range of touring and broadcastapplications it delivers outstanding audio quality and a unique dynamic. PLL-synthesisedtechnology with 16 pre-programmed UHF frequencies, pilot tone recognition and diversity-design with two receiving antennas at the pocket receiver supply a safe and stable signal transmission
5.1 MONITORING HEADPHONE SYSTEMwww.beyerdynamic.com35
Headzone PROProfessional 5.1 Monitoring Headphone System Order # 490.911
Headzone PRO is the first mobile headphone system that allows professional monitoring withvirtual 5.1 reproduction. With the help of the most up-to-date digital signal processing (DSP),“Binaural Environment Modelling” technology and patented ultrasonic-headtracking the system achieves an audio impression which is equivalent to a genuine 5.1 loudspeaker arrangement with respect to localisation and space impression. Headzone offers all the advantages of a compact headphone solution but manages to avoid all the familiar disadvantages such as localisation in the head, lack of spatial effect and the turning of the auditory space with the head.
The Headzone system is ideal for use in various applications including software game sound design, broadcast, post production, music studios or mobile recording environments.
For further information about Headzone please visit our websitewww.beyerdynamic.com or send an e-mail to [email protected].
Room ModellingSimulating your own personal reference control room
With Headzone’s advanced environment simulation software it’s easy to model the sound of aloudspeaker system (up to 5.1) and to recall it at any time. The parameters that affect sound ina real room can all be adjusted virtually: the position of the loudspeakers in the room, their distance from the listener, the size and also the acoustic qualities of the room. So it’s you whodecides the audio environment in which to work at any time.
HeadtrackingHeadtracking for perfect localisation and constant spatial awareness
Headzone makes sound an experience. Through the use of the ultrasonic-headtracker system,Headzone permanently detects the position of your head and adapts the source audio playbackposition accordingly. Unlike traditional headphones turning your head does not affect the localisation of Headzone’s sound. As in a real environment, when using Headzone the virtualspeaker or sound source is located in front of, next to or behind you depending on how youturn your head, therefore simulating the “sweet spot” in your control room. The result is so effective that you completely forget that you are wearing headphones.
ApplicationsTrue virtual reality, no matter where you are
Headzone for surround studio monitoringRegardless of whether it is used as a secondary listening device in professional surround studios,as a solution for 5.1 surround monitoring or whilst out and about: With Headzone, you cantake your reference control room with you.
Headzone for broadcast monitoringEven in the most compact of broadcast vehicles, Headzone is the ideal solution for surroundmonitoring. The system requires minimal space and can be installed quickly. But that’s not all:Headzone is so discreet that the surround material can even be listened to whilst on locationduring live recording.
Headzone for software game sound designersDo you engineer real sounds to create your own? With 5.1 surround becoming an integral partof software gaming, Headzone is a perfect tool for programmers and sound designers alike,even when you are on the move.
ComponentsHBP 1 Headzone Base PRO
Base station, 1 HU half-rack/ desktop unit, incl. external power supply, and desk top frame . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 490.989
DT 880 PRO HT Studio Headphones250 Ω, semi-open, integrated ultrasound exciters for Headzone headtracker, single-sided coiled cable with stereo mini jack, 1/4" adapter (6.35 mm) . . . . . . . . . . . . . . . . . Order # 490.938
HR 1 Headzone RailHeadzone Headtracker receiver bracket with 2 ultrasound receivers, incl. connecting cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 490.954
HC 1 Headzone ClipFlexible clip to mount the headzone rail HR1 receiver bracket at computer displays or for use as stand or wall mount adapter . . . . Order # 490.962
Bag Headzone Bag . . . . . . . . . . . . . . . . . . . Handy transport bag in Notebook bag design . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 491.179
THE REAL VIRTUAL REALITY
HEADPHONESwww.beyerdynamic.com36
DT 48Dynamic Studio Headphone
The DT 48 is designed for use in ENG/EFP applications as part of the standard equipment of field engineers requiring exceptional performance to meet the standards set by DAT and MiniDisc portable recorders. The DT 48 E, with single-sided cable is especially recommendedfor reporting applications. Long term comfort is achieved by the soft-feel headband and earcushions which are filled with foam material.The fully enclosed ear cup eliminates ambient noise, essential for accurate monitoring.
Features• Flat accurate frequency response • Excellent isolation from unwanted ambient sounds• Very rugged construction• Extremely comfortable
DT 48 A.00Dynamic Audiometric HeadphonesOrder # 101.060
The DT 48 A.00 is a special headphone for aural-acoustical investigations and measurementsfor ear, nose and throat specialists as well as for universities and research centres. The DT 48 A.00 features excellent ambient noise attenuation due to the closed design.The matched transducer elements have an impedance of 5 Ω per system and are carefully selected to achieve a maximum frequency response deviation of ±1 dB. The coupling to the ear is supra-aural by utilising flat rubber ear caps. Easy lateral identification by means ofcoloured coded covers correspond to accepted standards. The cable is supplied with free ends so that specialist connectors can be used.
Features• Audiometric version according to DIN 45 620• High quality transducer elements, selected in pairs• Colour coded right/left designation• Supra-aural rubber ear caps• Straight open-ended cable fixed to the headphone
DT 48
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedNominal frequency response . . . . . . . 16 - 20,000 Hz Nominal impedance . . . . . . . . . . . . . 25 Ω or 200 Ω / systemNominal source impedance . . . . . . . . 120 ΩNominal output power . . . . . . . . . . . 97 mWNominal SPL . . . . . . . . . . . . . . . . . . . 105 dB SPLNominal T.H.D. . . . . . . . . . . . . . . . . . < 1%Power handling capacity . . . . . . . . . . 100 mWSound coupling to the ear . . . . . . . . . CircumauralIsolation of ambient noise . . . . . . . . . 12 dBANominal headphone pressure . . . . . . 5 NWeight (without cable) . . . . . . . . . . . 400 g(all specifications according to EN 60 268-7)
VersionsDT 48 E 25 Ω / system, WK 48.07 coiled cable
with gold plated stereo mini jack (3.5 mm) and 1/4" adapter (6.35 mm), single-sided . . . . . . . . . . . . . . . . . . . . . . Order # 404.306
DT 48 E 200 Ω / system, WK 48.07 coiled cablewith gold plated stereo mini jack (3.5 mm) and 1/4" adapter (6.35 mm), single-sided . . . . . . . . . . . . . . . . . . . . . . Order # 433.454
Spare PartsEDT 48 S Ear pads, soft PVC . . . . . . . . . . . . . . . . . Order # 907.305BN 59-17 Headband pad. . . . . . . . . . . . . . . . . . . . Order # 126.713
DT 48 A.00
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 16 - 20,000 HzNominal impedance . . . . . . . . . . . . . 5 Ω ± 10% per cartridgeNominal output power . . . . . . . . . . . 200 mWNominal SPL . . . . . . . . . . . . . . . . . . . 110 dB SPL (500 Hz, 1 mW at 5 Ω)Nominal T.H.D at 1 kHz . . . . . . . . . . . < 1%Nominal headphone pressure . . . . . . 5 NIsolation of ambient noise . . . . . . . . . 12 dBASound coupling to ear . . . . . . . . . . . . Supra-auralWeight (without cable) . . . . . . . . . . . 400 gColour identification . . . . . . . . . . . . . Red cover = right
Blue cover = left(all specifications acc. to EN 60 268-7)
Spare PartsEDT 48 R Rubber ear cushions pair . . . . . . . . . . . . Order # 907.313BN 59-17 Headband pad. . . . . . . . . . . . . . . . . . . . Order # 126.713
Frequency response curve ±2.5 dB 0 dB = 110 dB SPL DT48 A.00
HEADPHONESwww.beyerdynamic.com37
DT 100DT 102Dynamic Studio Headphones
The DT 100 headphone is widely used in audiorecording and monitoring applications in studiosworld-wide. The DT 100 offers a high degree ofwearing comfort and can be worn for hours without listener fatigue. The soft ear cushions effectively sealout ambient noise yet apply minimal pressure against the ear.The DT 102 is the identical headphone to the DT 100with the exception that it is a single-ear headphone. The DT 102 is used in broadcast work, recording,TV studio and theatre applications where themonitoring of outside ambient informationis necessary.
Features• Easy servicing / all parts replaceable• Excellent ambient noise attenuation• Rugged construction• Wide transmission range• High SPL• DT 102 Single ear version
DT 100 / DT 102
Transducer type . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 30 - 20,000 Hz Nominal impedance . . . . . . . . . . . . . 400 Ω ± 10% / system*Nominal SPL . . . . . . . . . . . . . . . . . . . 94 dB SPLT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 1%Power handling capacity . . . . . . . . . . 1,000 mW (= 124 dB SPL)Sound coupling to the ear . . . . . . . . . CircumauralAmbient noise attenuation . . . . . . . . 20 dBAHeadband pressure . . . . . . . . . . . . . . 4.5 NWeight (without cable) . . . . . . . . . . . DT 100: 350 g / DT 102: 250 g(Technical Specifications acc. to EN 60 268-7)*more impedances available
VersionsDT 100 400 Ω, grey, with K 100.07 cable. . . . . Order # 421.022DT 100 same as above, but with 16 Ω systems. Order # 474.169DT 100 400 Ω, black, with K 100.07 cable . . . . Order # 421.464DT 100 same as above, but with 16 Ω systems. Order # 474.177DT 102 Single ear version, 400 Ω, grey,
with K 100.07 cable. . . . . . . . . . . . . . . Order # 421.561DT 102 same as above, but with 16 Ω systems. Order # 474.185
Optional AccessoriesK 100.00 Straight cable, 3 m long,
with free ends . . . . . . . . . . . . . . . . . . . Order # 101.170K 100.07 Straight cable, 3 m long, with 3-pin
1/4" stereo jack (6.35 mm). . . . . . . . . . Order # 101.753WK 100.00 Coiled cable, 3 m long,
with free ends . . . . . . . . . . . . . . . . . . . Order # 101.788WK 100.07 Coiled cable, 3 m long, with 3-pin
1/4" stereo jack (6.35 mm). . . . . . . . . . Order # 101.826
Spare PartsEDT 100 S Ear pads, soft PVC . . . . . . . . . . . . . . . . Order # 907.003EDT 100 P Ear pads, plush. . . . . . . . . . . . . . . . . . . Order # 945.576EDT 100 T Ear pads, cotton jersey . . . . . . . . . . . . . Order # 945.584BN 59-18/A Headband pad for DT 100 series . . . . . Order # 108.715
DT 100
DT 102
HEADPHONESwww.beyerdynamic.com38
DT 150Dynamic Studio Headphone Order # 455.970
The DT 150 is a dynamic studio headphone for use in broadcasting, film and recordingstudios and other audio monitoring applications where comfort and performance areprimary requirements. Due to its closed design it features excellent ambient noise isolation for reference monitoring. Based on the highly successful physical design of theDT 100, the DT 150 has ultra-linear transducers with a frequency response from 5 Hzextending all the way out to 30,000 Hz making them the ultimate monitoring tool.
Features• Wide frequency response• Extended bass response• High long-term wearing comfort• Excellent isolation from ambient noise• Rugged construction• Modular construction for easy servicing
DT 231 PRODynamic Studio Headphone Order # 458.562
The DT 231 PRO is a lightweight, closed headphone for studio and stage applications.The DT 231 PRO features a high degree of acoustic coupling with an outstanding low-frequency response and smooth mid and high frequencies. Soft, replaceable ear padsensure listening comfort during extended periods of use. The connecting cable featuresa mini stereo jack (3.5 mm) and 1/4" adapter (6.35 mm) and is therefore suitable foruse with almost all headphone amplifiers.
Features• Closed headphone• Brillant sound• Powerful bass reflex system• Supra-aural• Exchangeable ear pads• Single-sided straight cable
DT 150
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 5 - 30,000 HzNominal impedance . . . . . . . . . . . . . 250 Ω / systemNominal SPL . . . . . . . . . . . . . . . . . . . 97 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Power handling capacity . . . . . . . . . . 100 mWSound coupling to the ear . . . . . . . . . CircumauralHeadband pressure . . . . . . . . . . . . . . 4.5 NAmbient noise attenuation . . . . . . . . Approx. 20 dBAWeight (without cable) . . . . . . . . . . . 250 g(All specifications acc. to EN 60 268-7)
Supplied AccessoriesK 100.07 Straight cable, 3 m, with 3-pin
1/4" stereo jack (6.35 mm) . . . . . . . . Order # 101.753
Optional AccessoriesK 100.00 Straight cable, 3 m,
with free ends . . . . . . . . . . . . . . . . . . Order # 101.170WK 100.00 Coiled cable, 3 m,
with free ends . . . . . . . . . . . . . . . . . . Order # 101.788WK 100.07 Coiled cable, 3 m, with 3-pin
1/4" stereo jack (6.35 mm) . . . . . . . . Order # 101.826
Spare PartsEDT 150 S Ear pads, soft PVC. . . . . . . . . . . . . . . Order # 931.532BN 59-58/A Headband pad for DT 150. . . . . . . . . Order # 377.163
DT 231 PRO
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 20 - 18,000 HzNominal impedance . . . . . . . . . . . . . 32 Ω / systemNominal SPL . . . . . . . . . . . . . . . . . . . 95 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Power handling capacity . . . . . . . . . . 50 mWSound coupling to ear . . . . . . . . . . . . Supra-auralNominal headband pressure . . . . . . . Approx. 2 NWeight (without cable) . . . . . . . . . . . 130 gLength and type of cable. . . . . . . . . . 2.5 m / straight cable, single-sidedConnection . . . . . . . . . . . . . . . . . . . . with gold plated stereo mini jack
(3.5 mm) and 1/4" adapter (6.35 mm)
Spare PartsEDT 231 V Ear pads, velours . . . . . . . . . . . . . . . . . . Order # 954.249
HEADPHONESwww.beyerdynamic.com39
DT 250DT 252Dynamic Studio Headphones
The DT 250 is a lightweight, closed dynamic headphone, which was specially designed for studio applications. It features an efficient neodymium magnet system and accurate frequencyresponse. The wide transmission range between 10 - 30,000 Hz is another important feature.The soft circumaural earcups offer a high wearing comfort and excellent ambient noiseinsulation. The padded headband is fully adjustable. The connecting cables to the earcupsrun safely in the headband.The connecting cable is single-sided, coiled, with gold plated stereo mini jack (3.5 mm) and1/4" adapter (6.35 mm). All parts are easy to replace. The DT 252 is the single-sided version of the DT 250. This headphone is recommended for all broadcasting and theatre applicationswhere the ambient contact is essential.
Features• Closed headphone• Neodymium magnet system for accurate reproduction• Soft, circumaural ear pads• Very good ambient noise attenuation• Single-sided plug-in type connecting cable• DT 252 as single-sided version
DT 250 / DT 252
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedTransmission range . . . . . . . . . . . . . . 10 - 30,000 HzNominal impedance . . . . . . . . . . . . . 80 Ω or 250 Ω / system Nominal input voltage . . . . . . . . . . . . 2.8 V (= 100 mW at 80 Ω) = 120 dB SPLNominal sound pressurelevel at 1 kHz . . . . . . . . . . . . . . . . . . 100 dB SPL at 1 mW = 0.28 V to 80 ΩT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 1%Nominal power rating . . . . . . . . . . . . 100 mW = 120 dB = 2.8 V to 80 ΩSound coupling to the ear . . . . . . . . . CircumauralAmbient noise insulation. . . . . . . . . . Approx. 16 dBAAverage pressure on ears . . . . . . . . . 4.5 NWeight without cable . . . . . . . . . . . . 240 g (DT 250)
170 g (DT 252)Cable length . . . . . . . . . . . . . . . . . . . 3 m
VersionsDT 250 Studio headphone, 80 Ω,
with WK 250.07 coiled cable with gold plated stereo mini jack (3.5 mm) and 1/4" adapter (6.35 mm) . . . . . . . . . Order # 442.844
DT 250 same as above, but 250 Ω systems . . . . Order # 443.530DT 252 same as above,
but single-ear version, 80 Ω system . . . . Order # 445.177
Optional AccessoriesK 190.00 Straight, with free ends connecting cable . Order # 431.575
Spare PartsEDT 250 V Ear pads, velours . . . . . . . . . . . . . . . . . . Order # 942.704EDT 250 S Ear pads, soft PVC . . . . . . . . . . . . . . . . . Order # 943.549WK 250.07 Coiled cable with gold plated
stereo mini jack (3.5 mm) and1/4" adapter (6.35 mm). . . . . . . . . . . . . Order # 442.070
BN 59-59/A Headband pad for DT 250 series . . . . . . Order # 503.886
DT 250 DT 252
The production of the DT 770 headphone — Made in GermanyHEADPHONESwww.beyerdynamic.com40
DT 770 PRODynamic Headphone (250 Ω) Order # 459.046Dynamic Headphone (80 Ω) Order # 474.746
The DT 770 PRO is a closed, dynamic headphone for professional studio applications. The single-sided cable makes the handling easier. The rugged headband construction gives the headphone a secure fit and the reliability that is required for daily use. For the ultimate in headphone monitoring, the DT 770 PRO delivers music to your ears with clinical accuracy.
Features• Closed studio headphone • Innovative bass reflex system• Rugged headband construction • Single-sided cable • Soft, padded headband• Gold-plated mini stereo jack plug (3.5 mm) & 1/4" adapter (6.35 mm)
DT 770 MDynamic Headphone Order # 472.786
The dynamic, closed DT 770 M – therelationship with the DT 770 PRO is quite obvious – has especially been designed fordrummers. The strengthened headband and the newsoftskin ear pads provide an excellentisolation against ambience noise (35 dBA).The powerful 80 Ohm systems give superb audio quality whilst high soundpressure level (105 dB). The single-sidedstraight cable allows a volume controldirectly at the headphone.
DT 770 PRO
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 5 - 35,000 HzNominal impedance . . . . . . . . . . . . . 80 Ω or 250 Ω / systemNominal SPL . . . . . . . . . . . . . . . . . . . 96 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . 0.2%Power handling capacity . . . . . . . . . . 100 mWSound coupling to the ear . . . . . . . . . CircumauralAmbient noise attenuation . . . . . . . . Approx. 18 dBAHeadband pressure . . . . . . . . . . . . . Approx. 3.5 NWeight without cable . . . . . . . . . . . . 270 gLength and kind of cable:DT 770 PRO (250 Ω) . . . . . . . . . . . . . 3 m, coiled cableDT 770 PRO (80 Ω) . . . . . . . . . . . . . . 3 m, straight cableConnection . . . . . . . . . . . . . . . . . . . . gold plated stereo mini jack (3.5 mm)
and 1/4" adapter (6.35 mm)
Spare PartsEDT 330 S Ear pads, soft PVC . . . . . . . . . . . . . . . . . Order # 907.097EDT 770 V Ear pads, velours . . . . . . . . . . . . . . . . . . Order # 926.660BN 59-53/A Headband pad. . . . . . . . . . . . . . . . . . . . Order # 340.502
DT 770 M
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 5 - 30,000 HzNominal impedance . . . . . . . . . . . . . 80 Ω / systemNominal SPL. . . . . . . . . . . . . . . . . . . . 105 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Power handling capacity . . . . . . . . . . 100 mWSound coupling to the ear . . . . . . . . . CircumauralHeadband pressure . . . . . . . . . . . . . . Approx. 6,5 NWeight without cable . . . . . . . . . . . . Approx. 285 gLength and kind of cable . . . . . . . . . 3 m / straightConnection . . . . . . . . . . . . . . . . . . . . gold plated stereo mini jack (3.5 mm)
and 1/4" adapter (6.35 mm)
Spare PartsEDT 550 S Ear pads, softskin. . . . . . . . . . . . . . . . . . Order # 907.119BN 59-53/A Headband pad. . . . . . . . . . . . . . . . . . . . Order # 340.502
HEADPHONESwww.beyerdynamic.com41
DT 880 PRO
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Semi-openNominal frequency response . . . . . . . 5 - 35,000 HzNominal impedance . . . . . . . . . . . . . 250 Ω/ systemNominal SPL . . . . . . . . . . . . . . . . . . . 96 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Power handling capacity . . . . . . . . . . 100 mWSound coupling to the ear . . . . . . . . . CircumauralAverage pressure on ear . . . . . . . . . . 3.5 NWeight without cable . . . . . . . . . . . . 295 gCable . . . . . . . . . . . . . . . . . . . . . . . . 3 m / single-sided coiled cableConnection . . . . . . . . . . . . . . . . . . . . Gold-plated stereo mini jack (3.5 mm)
and 1/4" adapter (6.35 mm)
Spare PartsEDT 990 V Ear pads, velours . . . . . . . . . . . . . . . . . Order # 926.679BN 59-53/A Headband pad . . . . . . . . . . . . . . . . . . . Order # 340.502
DT 990 PRO
Transducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . OpenFrequency response. . . . . . . . . . . . . . 5 - 35,000 HzNominal impedance . . . . . . . . . . . . . 250 ΩNominal SPL . . . . . . . . . . . . . . . . . . . 96 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Power handling capacity . . . . . . . . . . 100 mWSound coupling to the ear . . . . . . . . . CircumauralAmbient noise attenuation . . . . . . . . Approx. 18 dBAHeadband pressure . . . . . . . . . . . . . Approx. 3.5 NWeight without cable . . . . . . . . . . . . 270 gLength and kind of cable. . . . . . . . . . 3 m / single-sided coiled cableConnection . . . . . . . . . . . . . . . . . . . . Gold-plated stereo mini jack (3.5 mm)
and 1/4" adapter (6.35 mm)
Spare PartsEDT 990 V Ear pads, velours . . . . . . . . . . . . . . Order # 926.679BN 59-53/A Headband pad . . . . . . . . . . . . . . . Order # 340.502
DT 880 PRODynamic Headphone Order # 490.970
The DT 880 PRO combines the advantages of open, transparent head-phones with those of powerful, closed studio headphones. The improvedsystems of the legendary DT 880 now offers a high-quality studio head-phone with excellent analytical properties, especially for classical music. The balanced reduction of environmental noise guarantees a perfect spherical sound, while the complete sound spectrum is reproduced in greatdetail from the lowest sub bass up to the highest frequencies. The higherfrequencies are crystal-clear without being unpleasant and impress with avery smooth sound. The precise balanced mid frequencies are analytical andsupportive, without being predominate. The bass is voluminous withoutbeing to obtrusive. The new designed headband fits for all headsizes andgrants better wearing comfort, especially during long studio sessions.
Features• Semi-open studio headphone • Innovative bass reflex system• Rugged headband construction• Single-sided cable• Soft headband pad• Gold plated stereo mini jack (3.5 mm) and 1/4" adapter (6.35 mm)
DT 990 PRODynamic Headphone Order # 459.038
The DT 990 PRO is an open headphone for studio applications. Its rugged headbandconstruction ensures a secure fit andwithstands all rigors. Its open diffused fieldequalization offers the highest performancein critical monitoring applications.
Features• Open studio headphone• Professional version of the DT 990• Rugged headband construction • Single-sided cable• Soft, padded headband• Gold plated stereo mini jack (3.5 mm)
and 1/4" adapter (6.35 mm)
HEADSETS / DT 109-SERIESwww.beyerdynamic.com42
DT 108HeadphoneTransducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 30 - 20,000 HzNominal impedance . . . . . . . . . . . . . 400 Ω ± 10% / system*Nominal SPL at 1 kHz . . . . . . . . . . . . 94 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 1%Power handling capacity . . . . . . . . . . 1,000 mW = 124 dBAmbient noise attenuation . . . . . . . . Approx. 20 dBASound coupling to the ear . . . . . . . . . CircumauralHeadband pressure . . . . . . . . . . . . . . Approx. 4.5 NWeight (without cable) . . . . . . . . . . . 283 g Cable length . . . . . . . . . . . . . . . . . . . 1.5 m*more impedances available
MicrophoneTransducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 40 - 12,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . HypercardioidOutput voltage . . . . . . . . . . . . . . . . . Approx. 2.5 mV at a distance of 5 cmNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . > 1,000 Ω
VersionsDT 108 200/50 Ω, grey . . . . . . . . . . . . . . . . . . . Order # 131.342DT 108 same as above, but black. . . . . . . . . . . . Order # 402.958DT 108 200/400 Ω, grey . . . . . . . . . . . . . . . . . . Order # 101.702DT 108 same as above, but black. . . . . . . . . . . . Order # 402.966
All DT 108 versions are supplied without connecting cable.Please order the appropriate connecting cable.(Refer also to page 52/53.)
Connecting CablesK 109.00 Straight connecting cable for DT 109
series with free ends, 1.5 m. . . . . . . . . . Order # 101.907K 109.00 same as above, 3.0 m . . . . . . . . . . . . . . Order # 127.949K 109.28 same as above, with 4-pin XLR female
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 220.132K 109.38 same as above, with 5-pin XLR male
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 406.538K 109.40 same as above, with 3-pin XLR male
and 1/4" jack, 1.5 m . . . . . . . . . . . . . . . Order # 449.121K 109.42 same as above, with 4-pin XLR male
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 446.548WK 109.00 Coiled connecting cable for DT 109
series with free ends, 1.5 m. . . . . . . . . . Order # 198.900
Spare PartsEDT 100 S Ear pads, soft PVC . . . . . . . . . . . . . . . . . Order # 907.003EDT 100 P Ear pads, velours . . . . . . . . . . . . . . . . . . Order # 945.576EDT 100 T Ear pads, cotton jersey. . . . . . . . . . . . . . Order # 945.584BN 59-18/A Headband pad for DT 100 series . . . . . . Order # 108.715BN 56-79/A Pop shield (5 pcs.) . . . . . . . . . . . . . . . . . Order # 108.677
DT 108DT 109Headsets with Dynamic Microphone
The DT 109 and DT 108 headsets are the standard headsets for live,remote broadcasting, studio, film, TV and language laboratory applications world-wide. Rugged, modular construction for field-serviceability. The headphone transducers feature extended frequency response.Adjustable, noise-cancelling microphone provides clear, audiblespeech transmission.
Features• Highly sensitive headphone and microphone transducers• Excellent ambient noise attenuation• Capable of handling very high SPL• Rugged construction• Excellent comfort for long-term wearing• Modular construction for easy servicing• DT 108 Single-ear version
DT 108
HEADSETS / DT 109-SERIESwww.beyerdynamic.com43
DT 109
HeadphoneTransducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 30 - 20,000 HzNominal impedance . . . . . . . . . . . . . 400 Ω ± 10% / system*Nominal SPL at 1 kHz . . . . . . . . . . . . 94 dBT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 1%Power handling capacity . . . . . . . . . . 1,000 mW = 124 dBAmbient noise attenuation . . . . . . . . Approx. 20 dBASound coupling to the ear . . . . . . . . . CircumauralHeadband pressure . . . . . . . . . . . . . . Approx. 4.5 NWeight (without cable) . . . . . . . . . . . 390 g Cable length . . . . . . . . . . . . . . . . . . . 1.5 m
MicrophoneTransducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 40 - 12,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . HypercardioidOutput voltage . . . . . . . . . . . . . . . . . Approx. 2.5 mV at a distance of 5 cmNominal impedance . . . . . . . . . . . . . 200 ΩLoad impedance . . . . . . . . . . . . . . . . > 1,000 Ω*more impedances available
VersionsDT 109 200/50 Ω, grey . . . . . . . . . . . . . . . . . . . Order # 101.877DT 109 same as above, but black. . . . . . . . . . . . Order # 402.974DT 109 200/400 Ω, grey, . . . . . . . . . . . . . . . . . . Order # 101.885DT 109 same as above, but black. . . . . . . . . . . . Order # 402.982
All DT 109 versions are supplied without connecting cable.Please order the appropriate connecting cable.(Refer also to page 52/53.)
Connecting CablesK 109.00 Straight connecting cable for DT 109
series with free ends, 1.5 m. . . . . . . . . . Order # 101.907K 109.00 same as above, 3.0 m . . . . . . . . . . . . . . Order # 127.949K 109.28 same as above, with 4-pin XLR female
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 220.132K 109.38 same as above, with 5-pin XLR male
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 406.538K 109.40 same as above, with 3-pin XLR male
and 1/4" jack, 1.5 m . . . . . . . . . . . . . . . Order # 449.121K 109.42 same as above, with 4-pin XLR male
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 446.548WK 109.00 Coiled connecting cable for DT 109
series with free ends, 1.5 m. . . . . . . . . . Order # 198.900
Spare PartsEDT 100 S Ear pads, soft PVC . . . . . . . . . . . . . . . . . Order # 907.003EDT 100 P Ear pads, velours . . . . . . . . . . . . . . . . . . Order # 945.576EDT 100 T Ear pads, cotton jersey. . . . . . . . . . . . . . Order # 945.584BN 59-18/A Headband pad for DT 100 series . . . . . . Order # 108.715BN 56-79/A Pop shield (5 pcs.) . . . . . . . . . . . . . . . . . Order # 108.677
DT 109DT 108
DT 109
Frequency response curve ±2.5 dB 0 dB = 2.5 mV at a distance of 5 cm
HEADSETS / DT 190-SERIESwww.beyerdynamic.com44
DT 190Headset with Balanced Dynamic Microphone Order # 423.386
The DT 190 is a closed headset with the addition of the DM 190 dynamic, balanced hypercardioid microphone. The DT 190 has been designed for broadcasting, monitoring and communication purposes such as commentating sports events or for intercom systems at live concerts and other situations which require precise audio performance. The DM 190 is a balanced, noise cancelling microphone and is mounted on a fully adjustable boom allowing accurate positioning for optimum sound and minimal explosive “p” popping.
Features• Noise cancelling microphone and high SPL capability• Excellent isolation from ambient noise• Modular design for easy servicing• Rugged construction
DT 190
HeadphoneTransducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedFrequency response. . . . . . . . . . . . . . 5 - 30,000 HzNominal impedance . . . . . . . . . . . . . 250 Ω / systemNominal SPL at 1 kHz . . . . . . . . . . . . 97 dB SPLT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Power handling capacity . . . . . . . . . . 100 mWSound coupling to the ear . . . . . . . . . CircumauralHeadband pressure . . . . . . . . . . . . . . 4.5 NAmbient noise attenuation . . . . . . . . Approx. 20 dBAWeight (without cable) . . . . . . . . . . . 350 g
MicrophoneTransducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . Pressure gradientFrequency response. . . . . . . . . . . . . . 40 - 12,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . HypercardioidNoise suppression . . . . . . . . . . . . . . . > 30 dBOutput voltage when used at a distance of 5 cm. . . . . . . . . . . . . Approx. 3 mVNominal output impedance. . . . . . . . Approx. 200 ΩLoad impedance . . . . . . . . . . . . . . . . > 1,000 Ω(all specifications according to EN 60 268-7)
All DT 190 versions are supplied without connecting cable.Please order the appropriate connecting cable.(Refer also to page 52/53.)
Connecting CablesK 190.00 Straight connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 431.575
K 190.00 same as above, 3.0 m . . . . . . . . . . . . . . Order # 441.937K 190.28 same as above, with 4-pin XLR female
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.304K 190.40 same as above, with 3-pin XLR male
and 1/4" jack, 1.5 m . . . . . . . . . . . . . . . Order # 445.894K 190.40 same as above, 3.0 m . . . . . . . . . . . . . . Order # 446.750K 190.41 same as above, with 5-pin XLR male
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.312WK 190.00 Coiled connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 448.176
Spare PartsEDT 150 S Ear pads, soft PVC . . . . . . . . . . . . . . . . . Order # 931.532BN 59-58/A Headband pad. . . . . . . . . . . . . . . . . . . . Order # 377.163BN 56-79/A Pop shield (5 pcs.) . . . . . . . . . . . . . . . . . Order # 108.677
Frequency response curve ±2.5 dB 0 dB = 3 mV at a distance of 5 cm
HEADSETSwww.beyerdynamic.com45
DT 234 PROHeadset with Condenser Microphone Order # 459.364
The DT 234 PRO headset is ideal for all kinds of multimedia applications. The noise-cancelling cardioid microphone allows high-quality speechreproduction. The headset is compatible with any PC soundcard. The straightconnection cable is equipped with stereo mini jacks for the microphone and the headphone. For applications in the broadcasting and intercom area the headset can be adapted for use with beltpacks and other devices.
Features• Closed headphone• Cardioid condenser microphone (back-electret)• Noise-cancelling• High-quality speech reproduction
Applications• Multimedia• Broadcast• Intercom
DT 234 PRO
HeadphoneTransducer type. . . . . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedSound coupling to ear . . . . . . . . . . . . SupraauralNominal impedance . . . . . . . . . . . . . 32 Ω / systemNominal SPL . . . . . . . . . . . . . . . . . . . 95 dB (1 mW, 500 Hz)Frequency response. . . . . . . . . . . . . . 20 - 18,000 HzT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Nominal headband pressure . . . . . . . 2 NWeight (incl. microphone) . . . . . . . . . 155 gCable length . . . . . . . . . . . . . . . . . . . 2.5 m, straight cableConnection . . . . . . . . . . . . . . . . . . . . Mini stereo jack (3.5 mm) and
1/4" adapter (6.35 mm)
MicrophoneTransducer type. . . . . . . . . . . . . . . . . Condenser (back-electret)Operating principle . . . . . . . . . . . . . . Pressure gradientPolar pattern . . . . . . . . . . . . . . . . . . . CardioidPower supply. . . . . . . . . . . . . . . . . . . AB-poweringSupply voltage. . . . . . . . . . . . . . . . . . 1.5 - 9 VCurrent consumption . . . . . . . . . . . . < 0.5 mANominal impedance . . . . . . . . . . . . . Approx. 1.5 kΩOpen circuit voltage at f = 1 kHz . . . . 15 mV/PaFrequency response. . . . . . . . . . . . . . 50 - 18,000 HzTHD . . . . . . . . . . . . . . . . . . . . . . . . . 0.2% at f = 1 kHzMax. SPL . . . . . . . . . . . . . . . . . . . . . . 125 dBMicrophone output . . . . . . . . . . . . . . UnbalancedDimensions . . . . . . . . . . . . . . . . . . . . Length microphone boom:
Approx. 150 mmCapsule diameter: 12.5 mm
Cable and connection . . . . . . . . . . . . Mini stereo jack (3.5 mm)Ring and top: AF, shaft: ground
Spare PartsEDT 231 V Ear pads, velours, black . . . . . . . . . . . . . Order # 954.249
Frequency response curve ±2.5 dB 0 dB = 15 mV DT 234 PRO (Mic)
HEADSETS / DT 290-SERIESwww.beyerdynamic.com46
DT 280Single-Ear Headset with Dynamic Microphone
The DT 280 and DT 290 are the ideal lightweight, low profile headsets forbroadcasting applications. The headphone is featuring an efficient neodymiummagnet system, a very high reproduction precision and a balanced sound.Another special feature is the wide transmission range of 10 - 30,000 Hz. The soft circumaural earcups and the fully adjustable padded headband are extremely comfortable. The dynamic microphone can be optimally positionedwith the flexible gooseneck. The hypercardioid polar pattern guarantees an extremely high gain-before-feedback and noise cancellation. If necessary theassembly of the microphone holder can be changed so that the microphonecan be worn on the left or right side. (In shipping conditions it is assembled onthe left side). The cables to the earcups and the microphone run safely in theheadband. The connecting cable is single-sided and easy to change (plug-intype). All parts such as ear cushions, headband, and gooseneck microphoneare easy to replace.
Features• Closed headphone• Neodymium magnet system for accurate reproduction• Soft, circumaural ear pads• Very good ambient noise attenuation• Single-sided, plug-in type connecting cable
DT 280
HeadphoneTransducer principle . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedTransmission range . . . . . . . . . . . . . . 10 - 30,000 HzNominal impedance . . . . . . . . . . . . . 80 Ω or 250 Ω / systemNominal input voltage . . . . . . . . . . . . 2.8 V (= 100 mW at 80 Ω) = 120 dB SPLNominal sound pressurelevel at 1 kHz . . . . . . . . . . . . . . . . . . 100 dB SPL at 1 mW = 0.28 V to 80 ΩT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Nominal power rating . . . . . . . . . . . . 100 mW = 120 dB = 2.8 V to 80 ΩAmbient noise insulation. . . . . . . . . . Approx. 16 dBAAverage pressure on ears . . . . . . . . . 4.5 NWeight without cable . . . . . . . . . . . . 170 g
Microphone DT 280 DT 280 V.11Transducer type. . . . . . . . . . . . . . . . . Dynamic DynamicFrequency response. . . . . . . . . . . . . . 40 - 12,000 Hz 40 - 12,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Hypercardioid HypercardioidOutput voltage at a distance of 5 cm. . . Approx. 3 mV Approx. 1.5 VNominal impedance . . . . . . . . . . . . . 200 Ω 200 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1,000 Ω –Current consumption . . . . . . . . . . . . – 8 - 56 mAWeight . . . . . . . . . . . . . . . . . . . . . . . 40 g
VersionsDT 280 Single-sided version, 200/80 Ω . . . . . . . Order # 441.309DT 280 same as above, but with 200/250 Ω . . . Order # 447.269DT 280 V.11 same as above, but 200/80 Ω and
with built-in pre-amplifier . . . . . . . . . . . Order # 442.860
All DT 280 versions are supplied without connecting cable.Please order the appropriate connecting cable.(Refer also to page 52/53.)
Connecting CablesK 190.00 Connecting cable for DT 190- and
DT 290 series with free ends, 1.5 m. . . . Order # 431.575K 190.00 same as above, 3.0 m . . . . . . . . . . . . . . Order # 441.937K 190.28 same as above, with 4-pin XLR female,
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.304K 190.39 Connecting cable for V.11 versions
with 5-pin XLR-male, for professional cameras (Sony, Philips, Ikegami), 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 475.181
K 190.40 same as above, with 3-pin XLR maleand 1/4" jack, 1.5 m . . . . . . . . . . . . . . . Order # 445.894
K 190.40 same as above, 3.0 m . . . . . . . . . . . . . . Order # 446.750K 190.41 same as above, with 5-pin XLR male,
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.312WK 190.00 Coiled connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 448.176
Spare PartsEDT 250 V Ear cushions pair, velours . . . . . . . . . . . . Order # 942.704EDT 250 S Ear cushions pair, softskin . . . . . . . . . . . Order # 943.549WS 97 AZ Windscreen, charcoal-grey. . . . . . . . . . . Order # 465.313
Frequency response curve ±2.5 dB 0 dB = 3 mV at a distance of 5 cm
HEADSETS / DT 290-SERIESwww.beyerdynamic.com47
DT 290Headset with Dynamic Microphone
The DT 280 and DT 290 are the ideal lightweight, low profile headsets forbroadcasting applications. The headphone is featuring an efficient neodymiummagnet system, a very high reproduction precision and a balanced sound.Another special feature is the wide transmission range of 10 - 30,000 Hz. The soft circumaural earcups and the fully adjustable padded headband are extremely comfortable. The dynamic microphone can be optimally positionedwith the flexible gooseneck. The hypercardioid polar pattern guarantees an extremely high gain-before-feedback and noise cancellation. If necessary theassembly of the microphone holder can be changed so that the microphonecan be worn on the left or right side. (In shipping conditions it is assembled on the left side). The cables to the earcups and the microphone run safely inthe headband. The connecting cable is single-sided and easy to change (plug-in type). All parts such as ear cushions, headband and gooseneck microphoneare easy to replace.
Features• Closed headphone• Neodymium magnet system for accurate reproduction• Soft, circumaural ear pads• Very good ambient noise attenuation• Single-sided, plug-in type connecting cable
DT 290
HeadphoneTransducer principle . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedTransmission range . . . . . . . . . . . . . . 10 - 30,000 HzNominal impedance . . . . . . . . . . . . . 80 Ω or 250 Ω / systemNominal input voltage . . . . . . . . . . . . 2.8 V (= 100 mW at 80 Ω) = 120 dB SPLNominal sound pressurelevel at 1 kHz . . . . . . . . . . . . . . . . . . 100 dB SPL at 1 mW = 0.28 V to 80 ΩT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Nominal power rating . . . . . . . . . . . . 100 mW = 120 dB = 2.8 V to 80 ΩAmbient noise insulation. . . . . . . . . . Approx. 16 dBAAverage pressure on ears . . . . . . . . . 4.5 NWeight without cable . . . . . . . . . . . . 240 g
Microphone DT 290 DT 290 V.11Transducer type. . . . . . . . . . . . . . . . . Dynamic DynamicFrequency response. . . . . . . . . . . . . . 40 - 12,000 Hz 40 - 12,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Hypercardioid HypercardioidOutput voltage at a distance of 5 cm. . . Approx. 3 mV Approx. 1.5 VNominal impedance . . . . . . . . . . . . . 200 Ω 200 ΩLoad impedance . . . . . . . . . . . . . . . . ≥ 1,000 Ω –Current consumption . . . . . . . . . . . . – 8 - 56 mAWeight . . . . . . . . . . . . . . . . . . . . . . . 40 g
VersionsDT 290 200/80 Ω. . . . . . . . . . . . . . . . . . . . . . . . Order # 441.317DT 290 same as above, but with 200/250 Ω . . . Order # 447.277DT 290 V.11 same as above, but 200/80 Ω and
with built-in pre-amplifier . . . . . . . . . . . Order # 441.384
All DT 290 versions are supplied without connecting cable.Please order the appropriate connecting cable.(Refer also to page 52/53.)
Connecting CablesK 190.00 Straight connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 431.575
K 190.00 same as above, 3.0 m . . . . . . . . . . . . . . Order # 441.937K 190.28 same as above, with 4-pin XLR female
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.304K 190.39 Connecting cable for V.11 versions
with 5-pin XLR-male, for professional cameras (Sony, Philips, Ikegami), 1.5 m . Order # 475.181
K 190.40 same as above, with 3-pin XLR maleand 1/4" jack, 1.5 m . . . . . . . . . . . . . . . Order # 445.894
K 190.40 same as above, 3.0 m . . . . . . . . . . . . . . Order # 446.750K 190.41 same as above, with 5-pin XLR male
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.312WK 190.00 Coiled connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 448.176
Spare PartsEDT 250 V Ear cushions pair, velours . . . . . . . . . . . . Order # 942.704EDT 250 S Ear cushions pair, softskin . . . . . . . . . . . Order # 943.549WS 97 AZ Windscreen, charcoal-grey. . . . . . . . . . . Order # 465.313
Frequency response curve ±2.5 dB 0 dB = 3 mV at a distance of 5 cm
HEADSETS / DT 290-SERIESwww.beyerdynamic.com48
DT 287Single-Ear Headset with Cardioid Condenser Microphone
The lightweight, closed DT 287 single-ear headset has been developed for professional broad-casting use. The headphone is featuring an efficient neodymium magnet system, a very highreproduction precision and an optimised speech reproduction for an excellent intelligibility.Another special feature is the wide transmission range of 10 - 30,000 Hz. This headset isequipped with a bigger capsule with an improved bass response. The microphone can be optimally positioned with the flexible gooseneck. The optimum distance to the mouth isaround 5 to 10 cm. The frequency response for this distance corresponds to recommendationsof the IRT (Institute for Radiotechnology in Munich).The soft circumaural earcaps and the fully adjustable padded headband offer a high wearingcomfort. The cardioid polar pattern guarantees high gain-before-feedback and noise cancellation. The wide transmission range enables a clear and precise speech transmission with a high syllable articulation. The cables to the ear cushions run safely in the headband.All parts such as ear cushions, headband, and gooseneck microphone are easy to replace.
Features• Closed headphone• Neodymium magnet system with a very high reproduction precision• Cardioid microphone• High gain-before-feedback• Single-sided connecting cable, plug-in type• Soft, circumaural ear pads
DT 287HeadphoneTransducer principle . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedTransmission range . . . . . . . . . . . . . . 10 - 30,000 HzNominal impedance . . . . . . . . . . . . . 80 Ω / systemNominal sound pressure (1 kHz) . . . . 100 dB T.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Ambient noise insulation. . . . . . . . . . Approx. 16 dBAAverage pressure on ears . . . . . . . . . 4.5 NWeight without cable . . . . . . . . . . . . 170 g
Microphone DT 297 PV DT 297 V.11Transducer principle . . . . . . . . . . . . . Condenser Condenser
(back-electret) (back-electret)Transmission range . . . . . . . . . . . . . . 40 - 20,000 Hz 40 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Cardioid CardioidOutput voltage at a distance of 5 cm. . . 5.5 mV/Pa 52 mV - 1.3 V
adjustableNominal impedance . . . . . . . . . . . . . Approx. 300 Ω Approx. 300 ΩNominal output impedance. . . . . . . . > 1,000 Ω –Open circuit voltage . . . . . . . . . . . . . 5 mV/Pa at f = 1 kHz –Max. SPL . . . . . . . . . . . . . . . . . . . . . . 132 dB –Equivalent nominal soundpressure level . . . . . . . . . . . . . . . . . . 62 dB –Current consumption . . . . . . . . . . . . Approx. 3.5 mA 6 - 56 mAPhantom supply . . . . . . . . . . . . . . . . 12 - 48 V –Dimensions . . . . . . . . . . . . . . . . . . . . Gooseneck length: 120 mm
Capsule diameter: 19 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 30 g
VersionsDT 287 PV Single-sided version, 80 Ω,
for phantom power . . . . . . . . . . . . . . . . Order # 479.349DT 287 V.11 Single-sided version, 80 Ω,
with built-in pre-amplifier . . . . . . . . . . . Order # 479.357
All DT 287 versions are supplied without connecting cable.Please order the appropriate connecting cable.(Refer also to page 52/53.)
Connecting CablesK 190.00 Straight connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 431.575
K 190.00 same as above, 3.0 m . . . . . . . . . . . . . . Order # 441.937K 190.28 same as above, with 4-pin XLR female,
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.304K 190.39 Connecting cable for V.11 versions
with 5-pin XLR-male, for professional cameras (Sony, Philips, Ikegami), 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 475.181
K 190.40 same as above, with 3-pin XLR maleand 1/4" jack, 1.5 m . . . . . . . . . . . . . . . Order # 445.894
K 190.40 same as above, 3.0 m . . . . . . . . . . . . . . Order # 446.750K 190.41 same as above, with 5-pin XLR male,
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.312WK 190.00 Coiled connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 448.176
Spare PartsEDT 250 V Ear cushions pair, velours . . . . . . . . . . . . Order # 942.704EDT 250 S Ear cushions pair, softskin . . . . . . . . . . . Order # 943.549WS 97 AZ Windscreen, charcoal-grey. . . . . . . . . . . Order # 465.313
Frequency response curve ±2.5 dB 0 dB = 5 mV/Pa
HEADSETS / DT 290-SERIESwww.beyerdynamic.com49
DT 297Headset with Cardioid Condenser Microphone
The lightweight, closed DT 297 headset has been developed for professional broadcasting use.The headphone is featuring an efficient neodymium magnet system, a very high reproductionprecision and an optimised speech reproduction for an excellent intelligibility. Another special feature is the wide transmission range of 10 - 30,000 Hz. This headset isequipped with a bigger capsule with an improved bass response. The microphone can be optimally positioned with the flexible gooseneck. The optimum distance to the mouth isaround 5 to 10 cm.The frequency response for this distance corresponds to recommendations of the IRT(Institute for Radiotechnology in Munich).The soft circumaural earcaps and the fully adjustable padded headband offer a high wearingcomfort. The cardioid polar pattern guarantees high-gain-before feedback and noise cancellation.The wide transmission range enables a clear and precise speech transmission with a high syllable articulation. The cables to the earcaps run safely in the headband.All parts such as ear cushions, headband and gooseneck microphone are easy to replace.
Features• Closed headphone• Neodymium magnet system with a very high reproduction precision• Cardioid microphone• High gain-before-feedback• Single-sided connecting cable, plug-in type• Soft, circumaural ear pads
DT 297HeadphoneTransducer principle . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedTransmission range . . . . . . . . . . . . . . 10 - 30,000 HzNominal impedance . . . . . . . . . . . . . 80 Ω / 250 Ω / systemNominal sound pressure (1 kHz) . . . . 100 dB T.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Ambient noise insulation. . . . . . . . . . Approx. 16 dBAAverage pressure on ears . . . . . . . . . 4.5 NWeight without cable . . . . . . . . . . . . 240 g
Microphone DT 297 PV DT 297 V.11Transducer principle . . . . . . . . . . . . . Condenser Condenser
(back-electret) (back-electret)Transmission range . . . . . . . . . . . . . . 40 - 20,000 Hz 40 - 20,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . Cardioid CardioidOutput voltage at a distance of 5 cm. . . 5.5 mV/Pa 52 mV - 1.3 V
adjustableNominal impedance . . . . . . . . . . . . . Approx. 300 Ω Approx. 300 ΩNominal output impedance . . . . . . . > 1,000 Ω –Open circuit voltage . . . . . . . . . . . . . 5 mV/Pa at f = 1 kHz –Max. SPL . . . . . . . . . . . . . . . . . . . . . . 132 dB –Equivalent nominal soundpressure level . . . . . . . . . . . . . . . . . . 62 dB –Current consumption . . . . . . . . . . . . Approx. 3.5 mA 6 - 56 mAPhantom supply . . . . . . . . . . . . . . . . 12 - 48 V –Dimensions . . . . . . . . . . . . . . . . . . . . Gooseneck length: 120 mm
Capsule diameter: 19 mmWeight . . . . . . . . . . . . . . . . . . . . . . . 30 g
VersionsDT 297 PV Headset, 80 Ω, for phantom power . . . . Order # 479.365DT 297 PV same as above, but 250 Ω . . . . . . . . . . . Order # 479.454DT 297 V.11 same as above 80 Ω,
with built-in pre-amplifier . . . . . . . . . . . Order # 479.462
All DT 297 versions are supplied without connecting cable.Please order the appropriate connecting cable.(Refer also to page 52/53.)
Connecting CablesK 190.00 Straight connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 431.575
K 190.00 same as above, 3.0 m . . . . . . . . . . . . . . Order # 441.937K 190.28 same as above, with 4-pin XLR female,
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.304K 190.39 Connecting cable for V.11 versions
with 5-pin XLR-male, for professional cameras (Sony, Philips, Ikegami), 1.5 m . Order # 475.181
K 190.40 same as above, with 3-pin XLR maleand 1/4" jack, 1.5 m . . . . . . . . . . . . . . . Order # 445.894
K 190.40 same as above, 3.0 m . . . . . . . . . . . . . . Order # 446.750K 190.41 same as above, with 5-pin XLR male,
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.312WK 190.00 Coiled connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 448.176
Spare PartsEDT 250 V Ear cushions pair, velours . . . . . . . . . . . . Order # 942.704EDT 250 S Ear cushions pair, softskin . . . . . . . . . . . Order # 943.549WS 97 AZ Windscreen, charcoal-grey. . . . . . . . . . . Order # 465.313
Frequency response curve ±2.5 dB 0 dB = 5 mV/Pa
HEADSETS / DT 290-SERIESwww.beyerdynamic.com50
DT 291
HeadphoneTransducer principle . . . . . . . . . . . . . DynamicOperating principle . . . . . . . . . . . . . . ClosedTransmission range . . . . . . . . . . . . . . 10 - 30,000 HzNominal impedance . . . . . . . . . . . . . 80 Ω or 250 Ω / systemNominal sound pressurelevel at 1 kHz . . . . . . . . . . . . . . . . . . 100 dB SPL at 1 mW = 0.28 V to 80 ΩT.H.D. . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%Nominal power rating . . . . . . . . . . . . 100 mW = 120 dB = 2.8 V to 80 ΩAmbient noise insulation. . . . . . . . . . Approx. 16 dBASound coupling to the ear . . . . . . . . . CircumauralAverage pressure on ears . . . . . . . . . 4.5 NWeight without cable . . . . . . . . . . . . 240 g
MicrophoneTransducer principle . . . . . . . . . . . . . Condenser (back-electret) Transmission range . . . . . . . . . . . . . . 20 - 18,000 HzPolar pattern . . . . . . . . . . . . . . . . . . . OmnidirectionalOutput voltage ata distance of 5 cm. . . . . . . . . . . . . . . Approx. 13 mVNominal impedance . . . . . . . . . . . . . 200 ΩNominal output impedance. . . . . . . . > 1,000 ΩMax. SPL . . . . . . . . . . . . . . . . . . . . . . 127 dBCurrent consumption . . . . . . . . . . . . Approx. 3.5 mAPhantom supply . . . . . . . . . . . . . . . . 12 - 48 VWeight . . . . . . . . . . . . . . . . . . . . . . . 30 g
VersionsDT 291 PV Headset, 80 Ω, for phantom power . . . Order # 447.129DT 291 PV same as above, but 250 Ω . . . . . . . . . . Order # 447.137
All DT 291 versions are supplied without connecting cable.Please order the appropriate connecting cable.(Refer also to page 52/53.)
Connecting CablesK 190.00 Straight connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 431.575
K 190.00 same as above, 3.0 m . . . . . . . . . . . . . . Order # 441.937K 190.28 same as above, with 4-pin XLR female
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.304K 190.40 same as above, with 3-pin XLR male
and 1/4" jack, 1.5 m . . . . . . . . . . . . . . . Order # 445.894K 190.40 same as above, 3.0 m . . . . . . . . . . . . . . Order # 446.750K 190.41 same as above, with 5-pin XLR male
1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.312WK 190.00 Coiled connecting cable for DT 190-
and DT 290 series with free ends, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 448.176
Spare PartsEDT 250 V Ear cushions pair, velours . . . . . . . . . . . . Order # 942.704EDT 250 S Ear cushions pair, softskin . . . . . . . . . . . Order # 943.549WS 30 SW Windscreen, charcoal-grey. . . . . . . . . . . Order # 439.959
DT 291Headset with Omnidirectional Condenser Microphone
The lightweight, closed DT 291 headset was developed for professionalbroadcast use.The headphone is featuring an efficient neodymium magnet system, a veryhigh reproduction precision and a balanced sound. Another special featureis the wide transmission range of 10 - 30,000 Hz.The soft circumaural earcups and the fully adjustable padded headbandoffer a high wearing comfort. The omnidirectional electret condenser microphone can be optimally positioned with the flexible gooseneck.The wide transmission range enables a clear and precise speech transmis-sion with a high syllable articulation. The cables to the earcups and the microphone run safely in the headband.All parts such as ear cushions, headband and gooseneck microphone areeasy to replace.
Features• Closed headphone• Neodymium magnet system for very high reproduction• Soft, circumaural ear pads• Excellent ambient noise attenuation• Single-sided connecting cable
Frequency response curve ±2.5 dB 0 dB = 6 mV/Pa
ACCESSORIESwww.beyerdynamic.com51
EDT 2 F Ear cushions pair, foam, 5 pairs-set, for DT 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 971.453EDT 48 S Ear cushions pair, soft PVC, for DT 48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 971.305 EDT 48 R Ear cushions pair, rubber, for DT 48 A.00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 907.313 EDT 100 S Ear cushions pair, softskin, black (standard), for DT 100/102/108/109 . . . . . . . . . Order # 907.003 EDT 100 P Ear cushions pair, plush, black, suitable for the tropics, for DT 100/102/108/109 . Order # 945.576EDT 100 T Ear cushions pair, cotton jersey, black, for suitable for the tropics, for
DT 100/102/108/109. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 945.584EDT 131 T Ear cushions pair, cotton jersey, for DT 131/131TV . . . . . . . . . . . . . . . . . . . . . . . Order # 951.711EDT 150 S Ear cushions pair, softskin, for DT 150/18*/19*. . . . . . . . . . . . . . . . . . . . . . . . . . Order # 931.532 EDT 200 S Ear cushions pair, softskin, for DT 200/209 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 907.011EDT 220 S Ear cushions pair, softskin, for DT 220. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 907.038EDT 231 V Ear cushions pair, velours, for DT 231/234 PRO/MMX1 . . . . . . . . . . . . . . . . . . . . Order # 954.249EDT 250 V Ear cushions pair, velours (standard), for DT 25*/28*/29* versions . . . . . . . . . . . Order # 942.704 EDT 250 S Ear cushions pair, softskin, for DT 25*/28*/29* versions . . . . . . . . . . . . . . . . . . . Order # 943.549EDT 302 F Ear cushions pair, foam, for DT 302/304 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 907.275EDT 320 S Ear cushions pair, softskin, for DT 320/340 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 907.054EDT 330 S Ear cushions pair, softskin, for DT 330/660/770/770 PRO . . . . . . . . . . . . . . . . . . Order # 907.097EDT 331 T Ear cushions pair, cotton jersey, for DT 331/431 . . . . . . . . . . . . . . . . . . . . . . . . . Order # 934.566EDT 394 F AZ Ear cushions pair, foam, charcoal-grey, for DT 394 . . . . . . . . . . . . . . . . . . . . . . . Order # 980.517EDT 394 F BL Ear cushions pair, foam, blue, for DT 394 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 980.533EDT 394 F GE Ear cushions pair, foam, yellow, for DT 394 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 980.541EDT 394 F RT Ear cushions pair, foam, red, for DT 394 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 980.525EDT 440 V Ear cushions pair, velours for DT 440 and DT 860 . . . . . . . . . . . . . . . . . . . . . . . . Order # 976.293EDT 440 F Ear cushions pair, foam, for DT 440/441/444/530 . . . . . . . . . . . . . . . . . . . . . . . . Order # 907.100EDT 550 S Ear cushions pair, softskin, for DT 550/770M/880/880S. . . . . . . . . . . . . . . . . . . . Order # 907.119 EDT 660 V Ear cushions pair, velours, for DT 660 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 976.307EDT 700 V Ear cushions pair, velours, for DTX 700/800/900, complete with foam discs
and adhesive tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 975.211EDT 770 V Ear cushions pair, velours, for DT 511/770/770 M/770 PRO/801/831/901 . . . . . . Order # 926.660EDT 990 V Ear cushions pair, velours, for DT 531/811//911/931/990/990 PRO/
880/880 PRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 926.679
Headband PadsBN 57 – 11/A Headband pad for DT 48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 126.713BN 59 – 18/A Headband pad for DT 100 series (DT 100/102/108/109) . . . . . . . . . . . . . . . . . . . Order # 108.715BN 59 – 53/A Headband pad for DT 770 PRO/880 PRO/990 PRO . . . . . . . . . . . . . . . . . . . . . . . Order # 340.502 BN 59 – 58/A Headband pad for DT 150/190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 377.163BN 59 – 59/A Headband pad for DT 250 series (DT 250/252/28X/29X) . . . . . . . . . . . . . . . . . . . Order # 503.886
K 100.00 Straight connecting cable for DT 100/102/150 with free ends, 3 m . . . . . . . . . . . Order # 101.170K 100.07 Straight connecting cable for DT 100/102/150 with
1/4" stereo jack (6.35 mm), 3 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 101.753WK 100.00 Coiled connecting cable for DT 100/102/150 with free ends . . . . . . . . . . . . . . . Order # 101.788WK 100.07 Coiled connecting cable for DT 100/102/150 with
1/4" stereo jack (6.35 mm), 3 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 101.826WK 48.07 Coiled connecting cable for DT 48 with gold plated stereo mini jack (3.5 mm)
and 1/4" adapter (6.35 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 104.051WK 48.07 E Coiled connecting cable for DT 48 with gold plated stereo mini jack (3.5 mm)
and 1/4" adapter (6.35 mm), single-sided . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 327.263
Cables for professional Studio Headphones
Ear Cushion Pairs / Headband Pads
EDT 100 T
EDT 330 S
EDT 48 S
DT 109 SeriesK 109.00 Straight connecting cable for DT 109 series with free ends, 1.5 m . . . . . . . . . . . . Order # 101.907K 109.00 same as above, 3.0 m. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 127.949K 109.28 Straight connecting cable for DT 109 series with 4-pin XLR-female, 1.5 m . . . . . . Order # 220.132K 109.38 Straight connecting cable for DT 109 series with 5-pin XLR-male, 1.5 m. . . . . . . . Order # 406.538K 109.40 Straight connecting cable for DT 109 series with 3-pin XLR-male and
stereo jack (6.35 mm), 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 449.121K 109.42 Straight connecting cable for DT 109 series with 4-pin XLR-male, 1.5 m. . . . . . . . Order # 446.548WK 109.00 Coiled connecting cable for DT 109 series with free ends . . . . . . . . . . . . . . . . . . . Order # 198.900
Cables for professional Headsets
ACCESSORIESwww.beyerdynamic.com52
ACCESSORIESwww.beyerdynamic.com53
DT 190 Series / DT 290 SeriesK 190.00 Straight connecting cable for DT 18*/19*/28*/29* with
free ends (standard cable), 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 431.575K 190.00 same as above, 3.0 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 441.937K 190.28 Straight connecting cable for DT 18*/19*/28*/29* with
4-pin XLR-female, 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.304K 190.39 Straight connecting cable for DT 28*/29*-series - V.11 versions with
5-pin XLR-male, for professional cameras (Sony, Philips, Ikegami), 1.5 m . . . . . . . . . . . . . . . Order # 475.181K 190.40 Straight connecting cable for DT 18*/19*/28*/29* with
3-pin XLR-male and 1/4" stereo jack (6.35 mm), 1.5 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 445.894K 190.40 same as above, 3.0 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 446.750K 190.41 Straight connecting cable for DT 18*/19*/28*/29*-series with 5-pin XLR-male, 1.5 m . . . . Order # 445.312K 190.42 Straight connecting cable for DT 18*/19*/28*/29*-series with 4-pin XLR-male, 1.5 m . . . . Order # 447.846WK 190.00 Coiled connecting cable for DT 18*/19*/28*/29*- series with free ends . . . . . . . . . . . . . . . Order # 448.176
ACCESSORIESwww.beyerdynamic.com54
BMC 05 FM MVK N(C) - K3MVK 82 - N(CM) MWK N(C) - K3
Microphone Cables / Power Supplies and Pre-amps / Cases and Identity rings
Power Supplies and Pre-ampsCV 3 Pre-amplifier for Opus 51/54/55/56 .16 versions . . . . . . . . . . . . . . . . . . . . . . . Order # 466.891CV 18 Pre-amplifier for microphones MCE/Opus.. .18 versions
(for condenser microphones with 4-pin mini-XLR) . . . . . . . . . . . . . . . . . . . . . . Order # 475.378CVU 16 Pre-amplifier for MCE / TG-X .. .16 (for condenser microphones with
4-pin LEMO-connector) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 451.088ZCV Battery compartment for CVU 16, CV 1 Opus and CV 3 . . . . . . . . . . . . . . . . . Order # 451.096MSG 248.1 Phantom power mains-supplied power pack for 2 mics, for balanced
and unbalanced inputs, EU 230 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 100.943Opus MIX 31 Mini mixer for up to 3 condenser microphones with .18 connector,
metal housing, battery powered with 9V battery, to connect to TS 100 Mk II, TS 300, TS 800(M), TS 900 C, TS 900 M and CV 18 . . . . . . . . . . . . . . . . . . . . . Order # 481.866
Microphone CablesBMC 005 FM BLK Standard microphone cable XLR-XLR, 0.5 m, black . . . . . . . . . . . . . . . . . . . . Order # 481.610BMC 05 FM BLK Standard microphone cable XLR-XLR, 5 m, black . . . . . . . . . . . . . . . . . . . . . . Order # 434.787BMC 10 FM BLK Standard microphone cable XLR-XLR, 10 m, black . . . . . . . . . . . . . . . . . . . . . Order # 434.795MVK 72 - K3 Connecting cable for MCE 82, 0.35 m, with
5-pin XLR-female and stereo mini jack (3.5 mm) . . . . . . . . . . . . . . . . . . . . . . Order # 470.643MVK 82 - K3 Connecting cable for MCE 82, 2.5 m, with
5-pin XLR-female and stereo mini jack (3.5 mm) . . . . . . . . . . . . . . . . . . . . . . Order # 450.949MVK 82 - N(CM) Connecting cable for MCE 82, 2.5 m,
with 5-pin XLR-female and 2 x 3-pin XLR-male . . . . . . . . . . . . . . . . . . . . . . . Order # 448.966MVK 86 - K3 Connecting cable for MCE 86/86II/MCE87, 0.35 m,
with 3-pin XLR-female and stereo mini jack (3.5 mm) . . . . . . . . . . . . . . . . . . Order # 479.268MVK 87 – K3 Connecting cable for MCE 86 S II, 2.5m, with 3-pin XLR
female and stereo mini jack (3.5mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 481.661MVK N(C) - K3 Connecting cable XLR - stereo mini jack (3.5 mm),
1.5 m (eg for connecting MCE 86/87 to video cameras) . . . . . . . . . . . . . . . . Order # 406.813MVK N(CF) - TA4F Adapter cable to connect wired microphones to pocket
transmitters with 4-pin mini-XLR connector, 1.5 m (5 ft.). . . . . . . . . . . . . . . . Order # 481.831MWK N(C) - K3 Coiled connecting cable XLR - stereo mini jack (3.5 mm)
for MCE 86S/MCE86SII/MCE87S/MCE 58 . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 470.570
There are various microphone cables in different lengths available for all wired microphones.
MVK 72 - K3
MVK 82 - K3
Cases and Identity ringsRH 77 Coloured identity rings for handheld transmitters with plastic housing from the
Opus wireless series (excl. Opus 100 Mk II),1 set contains 10 different colours . Order # 471.054RH 77 M Coloured identity rings for handheld transmitters with metal housing from the
Opus wireless series, 1 set contains 10 different colours . . . . . . . . . . . . . . . . . . Order # 471.062ZKK 6 H Rugged transport case for up to 6 microphones (Supply without mics) . . . . . . . Order # 438.030ZKK 740-833 Rugged transport case for studio microphones and stereo-sets . . . . . . . . . . . . Order # 504.580ZKK 834-19 Rugged transport case for neckworn microphones and MC 834 . . . . . . . . . . . Order # 393.371
MVK 86 - K3
Opus MIX 31MSG 248.1
CV 18
ZCV
CV 3CVU 16
ACCESSORIESwww.beyerdynamic.com55
BN 56-79/A Pop shield for DT 108/109/190 (5 pieces) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 108.677PS 20/40 Pop shield for Opus 39/59/69, black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 437.972PS 60/80 Pop shield for TG-X 60/61/80/81 and Opus 89, black . . . . . . . . . . . . . . . . . . . . Order # 437.980PS 81 Pop shield for Opus 81, MCE 91, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . Order # 407.593PS 88 Pop shield for M 69/88, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 111.414PS 740 Pop shield for MC 740/834/840, black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 401.897 PS 5 Pop shield for MCE 5, black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 219.045PS 10 Pop shield for MCE 10, black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 402.990
WS 5 Windscreen for MCE 5, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 275.603WS 7 AZ Windscreen for MCE 7, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 452.475WS 7 WS Windscreen for MCE 7, white . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 452.467WS 10 Windscreen for MCE 10, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 403.008WS 20 SW Windscreen for SHM 20/21, TG-X 45, Opus 54,
(also for DT 284/294/384/394/394.SIS), black. . . . . . . . . . . . . . . . . . . . . . . . . . Order # 439.975WS 20 WS Windscreen for SHM 20/21, TG-X 45, Opus 54, DT 284/294, white . . . . . . . . . Order # 439.983WS 30 SW Windscreen for TG-X 30, Opus 55, DT 281/291, black . . . . . . . . . . . . . . . . . . . Order # 439.959WS 30 WS Windscreen for TG-X 30, Opus 55, DT 281/291, white. . . . . . . . . . . . . . . . . . . Order # 439.967WS 53 Windscreen for MCE 530, Opus 53, M 424, charcoal-grey . . . . . . . . . . . . . . . . Order # 436.607WS 55 SW Windscreen for Opus 55 Mk II, MCE 55, MCE 60, MU 55 L, MU 55 HN, black (4 pieces). Order # 468.975WS 55 SC Windscreen for Opus 55 Mk II, MCE 55, MCE 60, MU 55 L, MU 55 HN, beige (4 pieces) Order # 479.204WS 58 AZ Windscreen for M 58, charcoal-grey. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 404.632WS 58 WS Windscreen for M 58, white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 406.821WS 59 AZ Windscreen for M 59/69/88, TG-X 60/80, Opus 69/81, charcoal-grey. . . . . . . . Order # 419.087WS 59 BL Windscreen for M 59/69/88, TG-X 60/80, Opus 69/81, blue. . . . . . . . . . . . . . . Order # 419.095WS 59 GE Windscreen for M 59/69/88, TG-X 60/80, Opus 69/81, yellow . . . . . . . . . . . . . Order # 419.109WS 59 GN Windscreen for M 59/69/88, TG-X 60/80, Opus 69/81, green. . . . . . . . . . . . . . Order # 419.117WS 59 RT Windscreen for M 59/69/88, TG-X 60/80, Opus 69/81, red . . . . . . . . . . . . . . . Order # 419.125WS 59 WS Windscreen for M 59/69/88, TG-X 60/80, Opus 69/81, white. . . . . . . . . . . . . . Order # 419.133WS 72 Windscreen for MCE 72, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 565.016WS 91 Windscreen for MCE 58, MCE 91, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . Order # 451.029WS 97 AZ Windscreen for Opus 62/67/82/87/88 and DT 280/287/290
and DT 297, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 465.313WS 101 Windscreen for M 101/201/422, Opus 83, MCE 84/93/94 and MC 930,
charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 111.244WS 260 Windscreen for M 130/160/260, charcoal-grey. . . . . . . . . . . . . . . . . . . . . . . . . Order # 111.309WS 716 Windscreen for MC 836, MCE 86/87, charcoal-grey. . . . . . . . . . . . . . . . . . . . . Order # 134.538 WS 717 Windscreen for MC 837, charcoal-grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 134.511WS 740/834 Windscreen for MC 740/834/840, M 99 and Opus 99, charcoal-grey . . . . . . . . Order # 401.994
WS 20
WS 716
WS 7WS 30
WS 59
PS 5 WS 55 SW / WS 55 SCPS 10WS 5 WS 10
WS 97WS 53 / WS 72 WS 740
PS 740(pictured with MC 740)
PS 20 PS 81
Pop and Windscreens
ACCESSORIESwww.beyerdynamic.com56
Windscreens and Windjammers
WJ 86 (pictured with MCE 86 and WS 716)
EAP MEDIUM
WJ 5
KWS 4 KIT Windscreen kit consisting of EAP MEDIUM, KWS 4 and WJ 4 for MC 836 . . . . Order # 477.850KWS 5 KIT Windscreen kit consisting of EAP MEDIUM, KWS 4, KWS EXT 1 and
WJ 5 for MCE 86/87, MCE 86 II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.869KWS 8 KIT Windscreen kit consisting of EAP MEDIUM, KWS 4, KWS EXT 4 and
WJ 8 for MC 837 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.869KWS 4 Windscreen zeppelin-type for MC 836 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.753KWS EXT 1 Extension for windscreen KWS 4 necessary to fit for MCE 86/87 and
MCE 86 II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.761KWS EXT 4 Extension for windscreen KWS 4 necessary to fit for MC 837 . . . . . . . . . . . . . . Order # 477.788
EAP MEDIUM Elastic suspension (medium) for MCE 86/MCE 86 II and MC 836 incl. pistolgrip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.796
EAP LARGE Elastic suspension (large) for MC 837 incl. pistolgrip. . . . . . . . . . . . . . . . . . . . . Order # 477.818
WJ 4 Windjammer, additional windscreen for KWS 4 fits to MC 836 . . . . . . . . . . . . Order # 477.826WJ 5 Windjammer, additional windscreen for KWS 4 with KWS EXT 1
fits to MCE 86/87, MCE 86 II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.834WJ 8 Windjammer, additional windscreen for KWS 4 with KWS EXT 4
fits to MC 837 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 477.842WJ 72 Windjammer for MCE 72, hair length 40 mm . . . . . . . . . . . . . . . . . . . . . . . . . Order # 475.645WJ 82 Windjammer for MCE 82, hair length 40 mm . . . . . . . . . . . . . . . . . . . . . . . . . Order # 475.637WJ 86 Windjammer additional windscreen, fits to WS 716, hair length 40 mm. . . . . . . Order # 475.629WJ 930 Windjammer, additional windscreen, fits to WS 53 and WS 72,
hair length 40 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 490.903
WJ 82 (pictured with MCE 82) WJ 5 WJ 930 (pictured with MCE 72 and WS 72)
KWS EXT 1
KWS EXT4
KWS 4
ACCESSORIESwww.beyerdynamic.com57
Microphone StandsGST 400 Stand, 3/8", height 0.90 - 1.65 m, with removable G 400 boom . . . . . . . . . . . . Order # 421.294GST 400 Stand, 5/8", height 0.90 - 1.65 m, with removable G 400 boom . . . . . . . . . . . . Order # 423.130GST 500 Stand, 3/8", height 0.85 - 1.60 m, with telescopic G 500 boom . . . . . . . . . . . . . . . . Order # 406.252GST 500 Stand, 5/8", height 0.85 - 1.60 m, with telescopic G 500 boom . . . . . . . . . . . . Order # 406.945GST 590 Stand, 3/8", with G 500 boom, low and adjustable height 34 - 60 cm,
eg for drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 418.765GST 590 Stand, 5/8", with G 500 boom, low and adjustable height 34 - 60 cm,
eg for drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 420.409ST 600 Stand, 3/8", with heavy base plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 421.316ST 99 Stand, 3/8", small and heavy for kick drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 471.917
ST 232 Desk stand, 3/8", height 165 mm, 130 mm diameter . . . . . . . . . . . . . . . . . . . . . Order # 273.309ST 300 Desk stand, 3/8". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 432.814ST 930 Mini desk stand, e.g. for CK 930 Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 490.849ZSH 20 Flexible shock-mount fixture for SHM gooseneck mics with XLR-male, black,
with checknut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 454.559ZSH 23 FG Stand adapter (3/8"and 5/8") with 3-pin XLR-female, cable with free ends, 1m . Order # 464.929ZSH 25 FG same as above, but with 5-pin XLR-female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 464.937ZSH 23 FT Base plate with 3-pin XLR-female, cable with free ends, 6 m. . . . . . . . . . . . . . . . Order # 464.902ZSH 25 FT same as above, but with 5-pin XLR-female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 464.910ZSH 40 -3/8" Base plate 3/8", footfall sound insulation, diameter 78 mm,
for goosenecks with 3/8" thread. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 272.272ZSH 50 (CM) Base plate with rubber pad, with XLR-connector,
for goosenecks with N(CF)-connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 431.451ZSH 51 (CM) Stand adapter with XLR-connector, for goosenecks with N(CF)-connections . . . . Order # 431.478
ST 99 (pictured with Opus 99)
GST 500ST 500
ST 600 GST 590
ZSH 20 ZSH 23 FG
Microphone Stands
ST 233ST 232
ST 300
ST 930 (pictured with CK 930 Set)
ACCESSORIESwww.beyerdynamic.com58
Mechanical Accessories
EA 19/25 Elastic suspension for shaft diameter of 19 - 25 mm, incl. MKV 11. . . . . . . . . . Order # 407.194EA 37 Elastic suspension for MC 740/742/834/840 and MCD 100/MCD 101 . . . . . . . Order # 452.955EA 86 Elastic suspension with flash holder BS 86 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 407.186BS 86 Set for flash holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 460.370EA 833 Elastic suspension for MC 833 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 460.400EA 90 Elastic suspension for MCE 90 and M 99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 452.270 MFH 5 Microphone mount for flute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 275.298MGH 5 Microphone mount for violin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 219.037MKV 5 Microphone clamp for MCE 5, 6 and 10, black . . . . . . . . . . . . . . . . . . . . . . . . Order # 453.994MKV 6 Microphone clamp for shaft diameter of 19 - 32 mm, black . . . . . . . . . . . . . . . Order # 407.208 MKV 7 BLK Microphone clamp for MCE 7, MCE 60, black . . . . . . . . . . . . . . . . . . . . . . . . . Order # 453.978MKV 7 SC Microphone clamp for MCE 7, beige . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 453.986MKV 8 Microphone clamp for shaft diameter of 22 - 32 mm. . . . . . . . . . . . . . . . . . . . Order # 407.216MKV 9 Microphone clamp for shaft diameter of 19 - 21 mm . . . . . . . . . . . . . . . . . . . Order # 407.224MKV 11 Microphone clamp for shaft diameter of 32 - 42 mm . . . . . . . . . . . . . . . . . . . Order # 407.232MKV 50 BLK Microphone clamp for MCE 50, black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 454.001MKV 50 SC Microphone clamp for MCE 50, beige . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 454.028MKV 55 BLK Microphone clamp for MCE 55, black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 470.511MKV 55 SC Microphone clamp for MCE 55, beige . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 480.479MKV 87 Patented microphone clamp with thread for 3/8"-adapter . . . . . . . . . . . . . . . Order # 459.356MKV 99 Microphone clamp for Opus 99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 471.909MMH 5 Magnetic holder for MCE 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 440.442MMH 10 Magnetic holder for MCE 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 439.827
MKV 50 MKV 55 SC
MKV 55 BLK
MKV 7MKV 5
MKV 99
MKV 6 MKV 8 / 9 / 11
MMH 5 / 10 MFH 5
EA 86 MKV 87
EA 37
EA 90
ø 35 mm
MGH 5 (pictured with MCE 5)
EA 19/25 + MKV 11
BS 86
EA 833
ø 37 mm
ø 57 mm
ACCESSORIESwww.beyerdynamic.com59
Threaded Adapter / Fishpole Booms / Special Microphone Mounts
NR. 215 NR. 216 NR. 217
Threaded AdapterNR. 215 5/8"A-3/8"I 1/2" Threaded adapter, 5/8" outer and 3/8" / 1/2" inner diameter . . . . . . . Order # 245.623NR. 216 3/8"A-5/8"I" Threaded adapter, 3/8" outer and 5/8" inner diameter . . . . . . . . . . . Order # 111.465NR. 217 5/8"A-3/8"I" Threaded adapter, 5/8" outer and 3/8" inner diameter . . . . . . . . . . . Order # 111.473
MZG 2
MZA 717 / 718
MZA 716(pictured with EA 19/25)
Fishpole Booms MZA 716 Fishpole boom in matte black with MZG 2 swivel joint for mounting
the microphone at any desired angle. The pickup direction can be varied within 360° simply by turning the fibre glass tubes. Fitted with 3/8" thread for microphone clamps of flexible mounts (with EA 19/25).Working length (extended) 3.3 m. Collapsed length 0.95 m. Weight 600 g. . . . Order # 140.848
MZA 717 Light fishpole boom made of non-glare black aluminum. Adjustable from 0.61 m to max. 1.59 m, weight 300 g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 400.807
MZA 718 Same as MZA 717, but adjustable from 0.93 m to 3.20 m, weight 800 g . . . . . Order # 406.260
MZG 2 Angle mount for MZA 716-718 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 234.249
MAV 800 (pictured with MCE 93)
MAV 802
Two MC 740 microphoneswith MAV 802 instereo recording.
Two MC 930 microphoneswith MAV 800 and MAV 802in XY-recording.
Special Microphone MountsZTK 237 Table clamp with 3/8" thread for goosenecks . . . . . Order # 115.029ZSK 238 Stand clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 129.313MAV 800 Clip 3/8" for hanging installation (from the ceiling)
of microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 448.133MAV 802 Multi-purpose mounting for two microphones
in stereo recordings. . . . . . . . . . . . . . . . . . . . . . . . . Order # 453.323
ZTK 237
ZSK 238
E / V
&P
Prod
uct
Cat
alog
ue (9
.06)
/ 10
.000
/ 55
6.31
9
beyerdynamic U.K. Ltd.17 Albert DriveBurgess Hill RH15 9TNTel. +44(0)1444-258258Fax +44(0)[email protected]
beyerdynamic GmbH & Co. KGTheresienstr. 874072 Heilbronn - GermanyTel. +49(0)7131-617-410Fax +49(0)[email protected]
beyerdynamic Inc. USA56 Central Ave.Farmingdale, NY 11735Tel. +1(631)293-3200Fax +1(631)[email protected]
Non-contractual illustrations. Subject to change without notice.
Further information regarding other beyerdynamic products from the business units “Conference & Presentation“, “Music & Performance“, “Consumer“ and “Aviation“ can be found in these brochures shown above. These brochures can be requested by sending an e-mail to [email protected]