BHARAT PETROLEUM CORPORATION LIMITED · 2017-07-31 · Page 2 of 3 1.0 INTRODUCTION: Bharat...

Page 1 of 3

BHARAT PETROLEUM CORPORATION LIMITED MUMBAI REFINERY, MAHUL

MUMBAI – 400 074, INDIA

Central Procurement Organisation (Refineries)

SUBJECT: ANNUAL RATE CONTRACT FOR SUPPLY OF BEARINGS FOR BPCL - MUMBAI

REFINERY and BPCL - KOCHI REFINERY.

REF. : CRFQ No. 1000285313, e-Tender No. 27351

DUE ON

16.08.2017 at 13:00 Hrs. (IST)

Page 2 of 3

1.0 INTRODUCTION :

Bharat Petroleum Corporation Limited (BPCL) – Central Procurement Organization (Refineries),

invites quotations for Annual Rate Contract for supply of Bearings for BPCL - Mumbai Refinery

(MR) and BPCL - Kochi Refinery (KR) through e- tendering platform under two-bid system (i.e.

Part 1 - Techno-commercial/Un priced Bid & Part 2 - Priced Bid) Annual Rate Contract basis for a

period of 1 (One) year. Tender can be downloaded from any of following we bsites:

• e-Procurement Portal : https://bpcleproc.in

• BPCL Web: https://www.bharatpetroleum.in/tender/view-tenders.aspx → Select

Department → CPO (Refineries)

• Central Public Procurement Portal: http://eprocure.gov.in/cppp

For participation in the tender, please fill up the tender online on the e-tender system available

on https://bpcleproc.in.

2.0 INDEX :

The complete set of tender documents consist of the following:

Part No. Annexure

No.

Description Documents to be

submitted with signed

and stamped on all pages

1 UN-PRICED BID

Scan copy of Full

Document

2 LIST OF ITEMS WITH DESCRIPTIONS / SPECIFICATIONS

Scan copy of 1ST Page if

accepted / Only sheet

where Deviation if any

3 APPLICABLE FREIGHT CHARGES & GST. Scan copy of Full

Document

4 SPECIAL PURCHASE CONDITIONS (SPC) Scan copy of Last Page

5 GENERAL PURCHASE CONDITIONS (GPC) Scan copy of Full

Document

6 COMMERCIAL QUESTIONNAIRE Scan copy of Full

Document

7 TECHNICAL DEVIATION FORM Scan copy of Full

Document

8 COMMERCIAL DEVIATION FORM Scan copy of Full

Document

9 PROFORMA FOR DECLARATION REGARDING HOLIDAY LISTING Scan copy of Full

Document

10 INTEGRITY PACT AGREEMENT Scan copy of Full

Document

11 BUSINESS RULES DOCUMENT FOR REVERSE AUCTION Scan copy of Last Page

12 BPCL SUPPLIER/ VENDOR ADVISORY ON ENVIRONMENTAL CRITERIA Scan copy of Full

Document

13 GST REGISTRATION DETAILS Scan copy of Full

Document

14 ANTI-PROFITEERING DECLARATION Scan copy of Full

Document

Bidder to note that the above Annexures duly filled in/duly signed and stamped along with supporting d ocuments

shall be uploaded in Part-1 (Techno-commercial / Unpriced bid) section. No prices shall be indicated i n any of the

above documents.

Part-2

15 PRICED BID To be filled in

e-procurement portal

Bidder to note that the prices shall be filled only in the e-procurement portal in Part-2 (Price Bid) section.

Page 3 of 3

3.0 CONTACT PERSONS

3.1 Please note that the tender enquiry is invited through e-tendering mode. In case

of any clarification regarding the tender, following are the contact persons:-

3.2 FOR E-TENDERING RELATED ISSUES:

If tenderers need some clarifications or are experiencing difficulties while

enrolling or while participating in this e-Tender, please e-mail to the following

E-Mail ID along with the snapshots of the errors be ing faced to:

E-Procurement Technologies Limited (Procure Tiger)

Bidders Help Desk No. : +91 - (79) - 40270573

Email: [email protected]

Ajay Nandangi

E-Mail: [email protected]

Contact: 8433615195

3.3 FOR OTHER CLARIFICATIONS:

For any commercial clarifications regarding this RFQ, please contact:

Shri H.P.Panchal, Procurement Manager-CPO(R), BPCL – Mumbai Refinery,

Mahul, Mumbai-400074.

Tel no. 022-25533117,

e-mail: [email protected]

Shri R.S. Krishna Sankar, Procurement Leader-CPO(R), BPCL – Mumbai Refinery,

Mahul, Mumbai-400074.

Tel no.: 022-2553 3202,

e-mail: [email protected]

Important: All updates, amendments, corrigenda, due date extensions etc., (if any) will

be posted on the e-tendering portal / websites as and when required.

Annexure – 1

SUB : Annual Rate Contract for Supply of Bearings for BPCL-Mumbai Refinery

and BPCL-Kochi Refinery.


UN-PRICED BID.

Bidders are requested to upload signed, stamped and

scanned copies with marking of “Quoted” or

“Non-Quoted” with HSN Code No. of each item of

un-priced bid in BPCL e-procurement portal.

Sr.No. Material code Short Text Unit MR QTY. KR QTY. Total QtyUnit Rate

(Rs.)HSN No.

1 31.74.07.022.5 BALL BEARING V30-11 SUJ2 ISWP101AB EA 0 2 2Quoted /

Non Quoted

2 58.00.04.619.7 BRG BALL 6019C4 95MM 145MM EA 0 3 3Quoted /

Non Quoted


Non Quoted

4 58.00.07.606.5 BRG BALL MTR 6206C3 30MM 62MM PC 1 5 6Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

16 58.00.07.637.5 BRG BALL MTR 6236 C3E 180MM 320MM PC 1 0 1Quoted /

Non Quoted

17 58.00.07.664.5 BRG BALL MTR 6215 NR/C3 75mm 130mm PC 2 20 22Quoted /

Non Quoted

18 58.00.07.710.7 BRG BALL 6210 2ZC3 50MM 90MM EA 1 9 10Quoted /

Non Quoted

19 58.00.07.906.7 BRG BALL 6205 2ZC3 25MM 52MM EA 1 86 87Quoted /

Non Quoted

20 58.00.10.616.5 BRG BALL MTR 6216 C3 80MM 140MM PC 1 20 21Quoted /

Non Quoted


Non Quoted


Non Quoted

23 58.00.13.606.5 BRG BALL MTR 6306C3 PC 1 20 21Quoted /

Non Quoted


Non Quoted


Non Quoted

26 58.00.13.609.5 BRG BALL MT 6309C3 45MM 100MM PC 19 33 52Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

UN-PRICED BIDANNUAL RATE CONTRACT FOR SUPPLY OF BEARINGS FOR BPCL - MUMBAI REFINERY and BPCL - KOCHI REFINERY


Page 1 of 24


(Rs.)HSN No.


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

37 58.00.13.620.5 BRG BALL MT 6320C3 100MM 215MM PC 2 29.00 31Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

41 58.00.13.626.7 BRG BALL 6326-MC3 130MM 280 EA 0 4 4Quoted /

Non Quoted

42 58.00.13.710.7 BRG BALL SKF/EQ 6310-2ZC3 50MM 110MM EA 0 29 29Quoted /

Non Quoted

43 58.00.13.711.5 BRG BALL 6410C3 50MM 130MM 31MM EA 0 3 3Quoted /

Non Quoted

44 58.00.13.712.7 BRG BALL 63122ZC3 60MM 130MM EA 1 23 24Quoted /

Non Quoted

45 58.00.13.817.5 BRG BALL MTR 6317P63 85MM 180MM PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

49 58.00.15.408.7 BRG BALL 63082RS1C3 40MM 90MM EA 0 5 5Quoted /

Non Quoted


Non Quoted


Non Quoted

52 58.00.15.521.8 BRG BALL THRUST 51118 90MM 120MM 22MM EA 0 4 4Quoted /

Non Quoted


Non Quoted


Non Quoted

55 58.00.19.083.5 BRG 22309E SKF EA 1 3 4Quoted /

Non Quoted

56 58.00.19.089.5 BALL BEARING - 6309-2RS PC 10 0 10Quoted /

Non Quoted

57 58.00.19.092.5 BALL BEARING - 6206 ZZ C3 PC 6 0 6Quoted /

Non Quoted

58 58.00.25.050.5 BRG PILLOW BLOCK SKF SYJ60TF/NSK UCP212 EA 0 5 5Quoted /

Non Quoted

59 58.00.77.208.5 BRG ROLLR MTR NU208ECKP/C3 40MM 80MM PC 2 0 2Quoted /

Non Quoted

60 58.00.77.218.5 BRG ROLLR MTR N218ECP 90MM 160MM PC 1 0 1Quoted /

Non Quoted

61 58.00.77.310.5 BRG ROLLR MTR NU210/ECKP C3 PC 1 0 1Quoted /

Non Quoted

Page 2 of 24


(Rs.)HSN No.

62 58.00.77.418.7 BRG ROLLER NU218ECJC3 90MM 160MM EA 1 8 9Quoted /

Non Quoted

63 58.00.77.506.7 BRG ROLLER NU206ECKPC3 30MM 62MM EA 0 4 4Quoted /

Non Quoted


Non Quoted

65 58.00.77.812.5 BRG ROLLR M NU212ECPC3 60MM 110MM PC 1 0 1Quoted /

Non Quoted

66 58.00.77.814.5 BRG ROLLR NU214ECMC3 70MM 125MM PC 1 3 4Quoted /

Non Quoted

67 58.00.77.815.5 BRG ROLLR NU215ECJC3 75MM 130MM PC 1 5 6Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

72 58.00.81.114.5 BRG ROLLR MTR N314ECP/C3 70MM 150MM PC 1 0 1Quoted /

Non Quoted

73 58.00.81.211.5 BRG ROLLR MTR NU211C3 PC 4 25 29Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

78 58.00.81.313.5 BRG ROLLR MTR NU314ECJ 70MM 150MM PC 2 0 2Quoted /

Non Quoted

79 58.00.81.314.5 BRG ROLLR MTR NU314ECJ/C3 70MM 150MM PC 6 0 6Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

83 58.00.81.318.5 BRG ROLLR NU318ECPC3 90MM 190MM PC 3 3 6Quoted /

Non Quoted


Non Quoted


Non Quoted

86 58.00.81.322.5 BRG ROLLR MTR NU 220 ECML C3 100MM 180MM PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted

89 58.00.81.358.5 BRG ROLLR M NJ308ECPC3 40MM 90MM PC 5 0 5Quoted /

Non Quoted


Non Quoted


Non Quoted

92 58.00.81.412.7 BRG ROLLER NU312ECMC3 60MM 130MM EA 1 3 4Quoted /

Non Quoted


Non Quoted

Page 3 of 24


(Rs.)HSN No.


Non Quoted

95 58.00.81.421.5 BRG ROLLR M NU321ECJC3 105MM 225MM PC 1 0 1Quoted /

Non Quoted


Non Quoted

97 58.00.81.427.7 BRG ROLLER NU326ECJC3 130MM 280 EA 1 3 4Quoted /

Non Quoted

98 58.00.81.430.5 BRG ROLLR M NU330ECMC3 150MM 320MM PC 1 0 1Quoted /

Non Quoted

99 58.00.81.517.7 BRG ROLLER NJ314ECJC3 70MM 150MM EA 1 3 4Quoted /

Non Quoted


Non Quoted

101 58.00.85.410.7 BRG ROLLER NU2310ECMLC3 50MM 110MM EA 1 0 1Quoted /

Non Quoted

102 58.00.85.412.5 BRG ROLLR MTR NU2212JC3 60MM 110MM PC 6 0 6Quoted /

Non Quoted

103 58.00.85.414.5 BRG RADIAL NU310 ECM C3 PC 1 28 29Quoted /

Non Quoted

104 58.00.85.510.7 BRG ROLLER NJ2310ECMLC3 50MM 110MM EA 0 6 6Quoted /

Non Quoted

105 58.00.90.022.5 BRG ROLLR MTR 23022CC/W33 110MM 170MM PC 2 0 2Quoted /

Non Quoted

106 58.00.90.024.5 BRG ROLLR MTR 23024 CC/C3W33 110MM 180MM PC 1 0 1Quoted /

Non Quoted

107 58.00.90.030.5 BRG ROLLR MTR 23030 CC/C3W33 135MM 225MM PC 1 0 1Quoted /

Non Quoted

108 58.00.90.214.5 BRG ROLLER 22214EC3 EA 0 11 11Quoted /

Non Quoted

109 58.00.90.215.7 BRG ROLLER 22215-EC3 75MM 130MM EA 0 3 3Quoted /

Non Quoted

110 58.00.90.218.7 BRG ROLLER 22218EC3 90MM 160MM EA 1 4 5Quoted /

Non Quoted

111 58.00.90.418.7 BRG ROLLER 22218-EK EA 1 3 4Quoted /

Non Quoted

112 58.00.95.411.5 BRG ROLLR M 22211EKC3 50MM 100MM PC 2 0 2Quoted /

Non Quoted

113 58.00.95.426.7 BRG ROLLER 22226EKC3 130MM 230MM EA 0 3 3Quoted /

Non Quoted

114 58.00.97.715.5 BRG ROLLR MTR 22315E 75MM 160MM PC 2 0 2Quoted /

Non Quoted

115 58.01.01.100.5 BRG BALL UK209+H2309 ID40MM OD85MM W50MM EA 0 3 3Quoted /

Non Quoted

116 58.01.01.508.5 BRG BALL MT 608J 8MM 22MM PC 6 0 6Quoted /

Non Quoted

117 58.01.01.607.7 BRG BALL 627 2Z 7MM 22MM EA 0 3 3Quoted /

Non Quoted

118 58.01.01.608.7 BRG BALL 608-2Z 8MM 22MM EA 1 9 10Quoted /

Non Quoted

119 58.01.04.426.7 BRG BALL 16026 130MM 200MM EA 0 3 3Quoted /

Non Quoted

120 58.01.04.600.5 BRG BALL MT 6000 10mm 26mm PC 2 0 2Quoted /

Non Quoted


Non Quoted


Non Quoted

123 58.01.04.606.5 BRG BALL MT 6006 30MM 55MM PC 2 6 8Quoted /

Non Quoted


Non Quoted


Non Quoted

Page 4 of 24


(Rs.)HSN No.


Non Quoted


Non Quoted


Non Quoted

129 58.01.04.613.7 BRG BALL 6013 65MM 100MM PC 0 4 4Quoted /

Non Quoted


Non Quoted


Non Quoted

132 58.01.04.703.7 BRG BALL 6003 Z 17MM 35MM EA 1 4 5Quoted /

Non Quoted

133 58.01.04.704.7 BRG BALL 6004 Z 20MM 42MM EA 1 8 9Quoted /

Non Quoted

134 58.01.04.901.7 BRG BALL 60012Z 12MM 28MM EA 0 3 3Quoted /

Non Quoted

135 58.01.04.904.5 BRG BALL MT 6004-2Z 20MM 42MM PC 5 3 8Quoted /

Non Quoted


Non Quoted

137 58.01.07.104.5 BRG BALL IM RLS4 1/2IN 1.5/16IN PC 6 0 6Quoted /

Non Quoted

138 58.01.07.106.5 BRG BALL IM RLS6 3/4IN 1.7/8IN PC 1 3 4Quoted /

Non Quoted

139 58.01.07.108.5 BRG BALL IM RLS8 1IN 2.1/4IN PC 1 3 4Quoted /

Non Quoted

140 58.01.07.110.5 BRG BALL IM RLS10 1.1/4IN 2.3/4IN PC 1 0 1Quoted /

Non Quoted

141 58.01.07.111.5 BRG BALL IM RLS11 1.3/8IN 3IN PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted

144 58.01.07.209.7 BRG BALL 629 2Z EA 0 25 25Quoted /

Non Quoted

145 58.01.07.362.7 BRG BALL 6262Z EA 0 5 5Quoted /

Non Quoted

146 58.01.07.382.7 BRG BALL ADRR82Z 1/2IN 1-1/8IN EA 0 4 4Quoted /

Non Quoted

147 58.01.07.518.5 BRG BALL 6219C3 95MM 170MM 32MM EA 0 4 4Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

Page 5 of 24


(Rs.)HSN No.


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

170 58.01.07.625.5 BRG BALL 6220 C3 180MM 100MM EA 3 25 28Quoted /

Non Quoted

171 58.01.07.626.7 BRG BALL 6226 C3 130MM 230 EA 1 4 5Quoted /

Non Quoted

172 58.01.07.702.5 BRG BALL MT 6202Z 15MM 35MM PC 4 0 4Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

189 58.01.08.401.5 BRG BALL MT 6201-2RS1 12MM 32MM PC 1 0 1Quoted /

Non Quoted

Page 6 of 24


(Rs.)HSN No.


Non Quoted

191 58.01.08.412.7 BRG BALL 6212-2RS1 60MM 110MM EA 1 28 29Quoted /

Non Quoted

192 58.01.10.106.5 BRG BALL IM RMS6 3/4IN 2IN PC 1 0 1Quoted /

Non Quoted

193 58.01.10.108.5 BRG BALL IM RMS8 1IN 2.1/2IN PC 2 0 2Quoted /

Non Quoted

194 58.01.10.109.5 BRG BALL IM RMS9 1.1/8IN 2.13/16IN PC 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

199 58.01.10.116.5 BRG BALL IM RMS16 2IN 4.1/2IN PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

203 58.01.10.603.5 BRG BALL SKF/EQ 6303 17MM 47MM PC 4 4 8Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

Page 7 of 24


(Rs.)HSN No.

222 58.01.10.628.5 BRG BALL MT 6328M 140MM 300MM PC 1 0 1Quoted /

Non Quoted

223 58.01.10.629.5 BRG BALL 6213C3 65MM 120MM PC 2 0 2Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

228 58.01.10.708.5 BRG BALL 6307 NR EA 0 30 30Quoted /

Non Quoted

229 58.01.10.711.7 BRG BALL 6311-Z 55MM 120MM EA 1 26 27Quoted /

Non Quoted


Non Quoted


Non Quoted

232 58.01.10.809.7 BRG BALL 6309 2ZNR 45MM 100MM EA 1 25 26Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

244 58.01.10.910.5 BEARING BALL MTR 6310 ZZ C3 50MM 110MM PC 10 20 30Quoted /

Non Quoted


Non Quoted

246 58.01.10.912.5 BEARING BALL MTR 6312-ZZ 60MM 130MM EA 6 20 26Quoted /

Non Quoted


Non Quoted

248 58.01.10.916.5 BRG BALL 6409 EA 1 3 4Quoted /

Non Quoted

249 58.01.11.406.7 BRG BALL 6306-2RS1 30MM 72MM EA 1 29 30Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

253 58.01.13.613.5 BRG BALL MTR 6413 65MM PC 2 0 2Quoted /

Non Quoted

Page 8 of 24


(Rs.)HSN No.


Non Quoted

255 58.01.27.202.7 BRG BALL 7202BECBJ 15MM 35MM EA 1 9 10Quoted /

Non Quoted

256 58.01.27.203.7 BRG BALL 7203BECBM 17MM 40MM EA 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

261 58.01.27.305.7 BRG BALL NSK 7205BECBM 25MM 52MM EA 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

266 58.01.27.406.5 BRG BALL MT 7206BECBP 30MM 62MM PC 8 0 8Quoted /

Non Quoted

267 58.01.27.408.5 BRG BALL MT 7208BECBP 40MM 80MM ST 10 3 13Quoted /

Non Quoted

268 58.01.27.420.7 BRG BALL 7220BECBM100MM 180MM SET 2 20 22Quoted /

Non Quoted

269 58.01.27.524.5 BRG BALL MTR 7224 BCBM/BM 120MM 215MM PC 5 20 25Quoted /

Non Quoted

270 58.01.27.606.7 BRG BALL 7206 BECBM 30MM 62MM SET 0 3 3Quoted /

Non Quoted

271 58.01.27.613.7 BRG BALL 7213 BECBJ 65MM 120MM SET 1 4 5Quoted /

Non Quoted

272 58.01.27.704.5 BRG BALL MT 7204BEP 20MM 47MM PC 5 3 8Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

276 58.01.27.712.5 BRG BALL MT 7212 BEP 60MM 110MM PC 2 0 2Quoted /

Non Quoted


Non Quoted

278 58.01.27.715.5 BRG BALL MT 7215-BECBJ 70 MM 125 MM PC 1 20 21Quoted /

Non Quoted

279 58.01.27.717.5 BRG BALL 7216 BECBJ ST 0 3 3Quoted /

Non Quoted

280 58.01.27.828.5 BRG BALL 7228BCBM EA 0 4 4Quoted /

Non Quoted

281 58.01.27.830.7 BRG BALL 7230 BCBM 150MM 270MM EA 1 5 6Quoted /

Non Quoted


Non Quoted

283 58.01.30.111.7 BRG BALL 7311 BECBJ 55MM 120MM EA 0 71 71Quoted /

Non Quoted

284 58.01.30.112.7 BRG BALL 7312 BECBJ 60MM 130MM EA 0 78 78Quoted /

Non Quoted

285 58.01.30.307.5 BRG BALL MTR 7307BECBM 35MM 80MM PC 5 0 5Quoted /

Non Quoted

Page 9 of 24


(Rs.)HSN No.

286 58.01.30.308.5 BRG BALL MT 7308BECBJ 40MM 90MM PC 12 20 32Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

295 58.01.30.317.5 BRG BALL MTR 7317BECBJ 85MM 180MM PC 5 20 25Quoted /

Non Quoted

296 58.01.30.318.5 BRG BALL MT 73218A 90MM 160MM PC 1 0 1Quoted /

Non Quoted

297 58.01.30.322.7 BRG BALL 7322BECBM 110MM 240MM SET 0 3 3Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

301 58.01.30.410.5 "BEARING,BALL,7311 BEC86P" PC 2 20 22Quoted /

Non Quoted

302 58.01.30.410.7 BRG BALL 7310BECBJ 50MM 110MM SET 0 30 30Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

306 58.01.30.414.5 BRG BALL MT 7314BECBP 70MM 150MM PR 2 34 36Quoted /

Non Quoted


Non Quoted

308 58.01.30.416.5 "BEARING,BALL,7315 BEC86P" PC 25 20 45Quoted /

Non Quoted


Non Quoted

310 58.01.30.419.5 BRG BALL MTR 7319BECBP PC 1 0 1Quoted /

Non Quoted

311 58.01.30.422.5 BRG BALL MTR 7322BECBP 110MM 240MM PC 3 3 6Quoted /

Non Quoted

312 58.01.30.424.5 BRG BALL MTR 7324BECBM 120MM 260MM PC 1 0 1Quoted /

Non Quoted

313 58.01.30.426.5 BRG BALL 7324 BCBM EA 1 4 5Quoted /

Non Quoted

314 58.01.30.427.5 BRG BALL 7312BEGAM 60MM 130MM EA 2 0 2Quoted /

Non Quoted


Non Quoted

316 58.01.30.429.5 BRG BALL 7320BEGAM 100MM 215MM EA 2 0 2Quoted /

Non Quoted


Non Quoted

Page 10 of 24


(Rs.)HSN No.

318 58.01.30.506.5 BRG BALL MTR 7306 BEP 30MM 72MM PC 3 0 3Quoted /

Non Quoted

319 58.01.30.514.7 BRG BALL SKF 7314BECBM 70MM 150MM SET 1 59 60Quoted /

Non Quoted

320 58.01.30.522.7 *CDLT*BRG BALL 7322BMPUA 110MM 240MM EA 1 0 1Quoted /

Non Quoted

321 58.01.30.608.5 BRG BALL 7308 BECBJ EA 1 64 65Quoted /

Non Quoted


Non Quoted


Non Quoted

324 58.01.30.706.5 BRG BALL MT 7306BECBJ30MM 72MM PC 3 6 9Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

333 58.01.30.720.5 BRG BALL MTR 7320BECBP 100MM 215MM PC 1 0 1Quoted /

Non Quoted

334 58.01.30.880.7 BRG BALL 7330 BCBM 150MM 320MM EA 1 3 4Quoted /

Non Quoted


Non Quoted

336 58.01.30.908.7 BRG BALL 7308BECBJ 40MM 90MM SET 0 34 34Quoted /

Non Quoted


Non Quoted

338 58.01.30.910.5 BRG THRUST 7309 BECBM ST 1 34 35Quoted /

Non Quoted


Non Quoted

340 58.01.30.912.5 BRG THRUST 7311BECBJ ST 1 30 31Quoted /

Non Quoted

341 58.01.30.913.7 BRG BALL 7313 BECBJ 65MM 140MM ST 1 28 29Quoted /

Non Quoted


Non Quoted


Non Quoted

344 58.01.33.305.7 BRG BALL 7405BCBM 25MM 80MM SET 1 3 4Quoted /

Non Quoted

345 58.01.33.310.7 BRG BALL 7410BCBM 50MM 130MM SET 1 5 6Quoted /

Non Quoted

346 58.01.33.410.5 BRG BALL MT 5410A 50mm 130mm PC 1 0 1Quoted /

Non Quoted

347 58.01.33.509.5 BRG BALL MTR 7409 BCBM 45MM 120MM PC 1 0 1Quoted /

Non Quoted

348 58.01.33.608.5 BRG BALL MT 7408BM 40MM 110MM PC 1 0 1Quoted /

Non Quoted

349 58.01.33.610.5 BRG BALL MT 7410BM 50MM 130MM PC 4 0 4Quoted /

Non Quoted

Page 11 of 24


(Rs.)HSN No.

350 58.01.33.812.5 BRG BALL MTR 7412 BM 60MM 150MM PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted

353 58.01.33.909.7 BRG BALL 7409 BCBM 45MM 120MM SET 1 3 4Quoted /

Non Quoted

354 58.01.34.529.5 BRG BALL QJ230N2MA BRASS CAGE ANG CONTCT EA 0 4 4Quoted /

Non Quoted

355 58.01.34.530.7 BRG BALL QJ230N2MA+NU230ECM150MM 270 SET 1 3 4Quoted /

Non Quoted

356 58.01.34.611.5 BRG BALL MT QJ311 MA 55MM 120MM PC 1 3 4Quoted /

Non Quoted

357 58.01.34.612.5 BRG BALL MTR QJ311N2MPA/C3 55MM 120MM PC 1 0 1Quoted /

Non Quoted

358 58.01.34.614.7 BRG BALL QJ314MA 70MM 150MM SET 1 3 4Quoted /

Non Quoted

359 58.01.34.712.5 BRG BALL MTR QJ 312 N2MA/C2L 60MM 130MM PC 1 0 1Quoted /

Non Quoted

360 58.01.34.812.7 BRG BALL QJ312MA/C3 60MM 130MM EA 1 3 4Quoted /

Non Quoted

361 58.01.34.813.5 BRG BALL MTR QJ312N2MAC2L 60MM 130MM PC 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted

364 58.01.34.840.5 BRG BALL 4 POINT CONTATCT QJ320N2MA SKF PC 1 3 4Quoted /

Non Quoted

365 58.02.10.108.7 BRG BALL 1308 ETN9 40MM 90MM EA 1 0 1Quoted /

Non Quoted


Non Quoted

367 58.02.10.604.5 BRG BALL MT 1304ETN-9 20MM 52MM PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted

370 58.02.19.501.5 BRG BALL MTR 2201 ETN9 12MM 32MM PC 1 4 5Quoted /

Non Quoted

371 58.02.19.508.7 BRG BALL 2208 ETN9 40MM80MM EA 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

375 58.02.22.504.5 BRG BALL MTR 2304 PC 1 0 1Quoted /

Non Quoted

376 58.02.22.505.5 BRG BALL MTR 2305 PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted

379 58.02.22.513.5 SKF RM22 2.75IN 6.25IN PC 1 0 1Quoted /

Non Quoted

380 58.02.27.708.5 "BEARING,1308 EKTN9 + H 308,PATEL" PC 1 0 1Quoted /

Non Quoted

381 58.02.27.709.5 BRG BALL MT 1209EKTN-9 45MM 85MM PC 1 0 1Quoted /

Non Quoted

Page 12 of 24


(Rs.)HSN No.

382 58.02.27.808.7 BRG BALL 1208EKTN9 + H208 SET 1 3 4Quoted /

Non Quoted

383 58.02.30.709.5 BRG BALL MTR 1309 EKTN9 45MM 100MM PC 1 0 1Quoted /

Non Quoted


Non Quoted

385 58.02.40.050.5 BRG BALL 1217K + H217 EA 0 4 4Quoted /

Non Quoted

386 58.02.40.065.5 BRG BALL 1310K+H310 EA 0 4 4Quoted /

Non Quoted

387 58.02.40.607.7 BRG BALL 2307EKTN9+H2307 EA 1 0 1Quoted /

Non Quoted

388 58.02.50.304.7 BRG BALL 3204A 20MM 47MM EA 1 3 4Quoted /

Non Quoted

389 58.02.50.305.5 BRG BALL MT 3205AJ 25MM 52MM PC 1 0 1Quoted /

Non Quoted

390 58.02.50.308.7 BRG BALL 3208 A 40MM 80MM EA 1 0 1Quoted /

Non Quoted

391 58.02.50.312.5 BRG BALL MTR 3212 A 60MM 110MM PC 0 3 3Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

395 58.02.50.403.7 BRG BALL 3203 A 2ZTN9/MT33 17MM 40MM EA 0 4 4Quoted /

Non Quoted

396 58.02.50.409.5 BRG BALL MT 3209ATN-9 45MM 85MM PC 2 0 2Quoted /

Non Quoted

397 58.02.50.709.7 BRG BALL 3209 A 2Z/MT33 45MM 85MM EA 1 3 4Quoted /

Non Quoted

398 58.02.50.910.7 BRG BALL 3310 A 2RS1/C3MT33 EA 1 3 4Quoted /

Non Quoted

399 58.02.53.307.5 BRG BALL MTR 3307 ATN9 35MM 80MM PC 6 25 31Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

409 58.02.53.407.5 BRG BALL MTR 3306 C3 30MM 72MM PC 1 0 1Quoted /

Non Quoted


Non Quoted

411 58.02.53.410.5 BRG BALL MTR 3308A 40MM 90MM PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted

Page 13 of 24


(Rs.)HSN No.

414 58.02.53.507.5 BRG BALL 3306 A 2Z/C3 MT33 EA 1 25 26Quoted /

Non Quoted

415 58.02.53.510.5 BRG BALL MT 3311A 2RS 55MM 120MM EA 1 3 4Quoted /

Non Quoted


Non Quoted

417 58.02.53.710.7 BRG BALL 3310 AC3 50MM 110MM EA 1 5 6Quoted /

Non Quoted


Non Quoted

419 58.02.65.215.7 BRG BALL 3215 A 2Z/C3MT33 EA 1 3 4Quoted /

Non Quoted

420 58.02.65.406.7 BRG BALL 4206 ATN9 30MM 62MM EA 1 0 1Quoted /

Non Quoted

421 58.02.67.113.7 BRG BALL 3313A 2Z/C3MT33 EA 1 3 4Quoted /

Non Quoted

422 58.02.67.211.5 BRG BALL MT 3311 ANRH 55mm 120mm PC 0 3 3Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

430 58.03.04.705.5 BRG BALL 51105 25MM 42MM 11MM EA 1 5 6Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

437 58.03.27.100.5 BRG BALL YAR 216-2F EA 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted

440 58.05.01.102.8 BEARING NU 210 ECJK TAPER BORE PC 1 0 1Quoted /

Non Quoted

441 58.05.01.214.8 BEARING SKF NU 210 ECKP/C3 PC 1 0 1Quoted /

Non Quoted

442 58.05.10.066.5 BRG.,BALL,FRIATEC,PN:RH26802 DIN 711 PC 1 0 1Quoted /

Non Quoted

443 58.05.10.067.5 "BEARING 6310-2RS, SKF MAKE" PC 1 20 21Quoted /

Non Quoted

444 58.05.10.068.5 "BEARING,6312RS,CGL" PC 1 20 21Quoted /

Non Quoted

445 58.05.10.069.5 "BEARING 6226, SKF MAKE" PC 1 0 1Quoted /

Non Quoted

Page 14 of 24


(Rs.)HSN No.

446 58.05.10.070.5 "BEARING 6204ZZC3, SKF MAKE" PC 2 0 2Quoted /

Non Quoted

447 58.05.10.071.5 "BEARING,BALL,6216 C3" PC 1 0 1Quoted /

Non Quoted

448 58.05.10.072.5 "BEARING,BALL,6218 C3" PC 1 20 21Quoted /

Non Quoted

449 58.05.10.073.5 "BEARING,6224 C3,SKF" PC 1 20 21Quoted /

Non Quoted

450 58.05.10.074.5 "BEARING,6314P63,NGEF" PC 1 20 21Quoted /

Non Quoted

451 58.05.10.075.5 "BEARING 6312-2RS, SKF MAKE" PC 1 20 21Quoted /

Non Quoted

452 58.05.10.076.5 "BEARING,6313-2RS,CGL" PC 4 0 4Quoted /

Non Quoted

453 58.05.10.077.5 "BEARING,6220C3" PC 2 20 22Quoted /

Non Quoted

454 58.05.10.078.5 "BEARING,6205ZZC3" PC 9 20 29Quoted /

Non Quoted

455 58.05.10.079.5 "BEARING,6219C3" PC 1 0 1Quoted /

Non Quoted

456 58.05.10.080.5 "BEARING,BALL,6232 C3,SKF" PC 1 0 1Quoted /

Non Quoted

457 58.05.10.081.5 "BEARING,BALL,6238 C3,SKF" PC 1 0 1Quoted /

Non Quoted

458 58.05.10.082.5 "BEARING,BALL,6217 C,SKF" PC 1 25 26Quoted /

Non Quoted

459 58.05.10.085.5 "BEARING,BALL,6219/C3" PC 1 0 1Quoted /

Non Quoted

460 58.05.10.086.5 BRG BALL 51209 45MM 73MM 20MM EA 1 3 4Quoted /

Non Quoted

461 58.05.10.087.5 THRUST BALL BEARING DESIGNATION NO 51211 PC 1 0 1Quoted /

Non Quoted

462 58.05.10.302.5 BRG 30211 J2/Q EA 1 3 4Quoted /

Non Quoted


Non Quoted

464 58.05.10.519.5 BRG THRUST 51114 EA 0 4 4Quoted /

Non Quoted


Non Quoted

466 58.05.10.530.5 BRG THR NEEDLE OD90 ID65 W5 AXK6590 EA 0 9 9Quoted /

Non Quoted

467 58.06.04.404.7 BRG ROLLER NU2204ECP 20MM 47MM EA 1 4 5Quoted /

Non Quoted

468 58.06.04.426.7 BRG ROLLER NU1026ML 130MM 200 MM EA 1 3 4Quoted /

Non Quoted

469 58.06.07.140.5 BRG ROLLR IMP CRL 40 AMB 9IN PC 1 0 1Quoted /

Non Quoted

470 58.06.08.111.7 BRG ROLLER N211ECM 55MM 100MM EA 1 3 4Quoted /

Non Quoted

471 58.06.08.121.5 BRG ROLLR MTR N 221 ECP 105MM 190MM PC 1 0 1Quoted /

Non Quoted

472 58.06.08.305.5 BRG ROLLR M N205ECP 25MM 52MM PC 1 0 1Quoted /

Non Quoted


Non Quoted

474 58.06.08.310.5 BRG ROLLR MTR NU210ECJ PC 1 0 1Quoted /

Non Quoted

475 58.06.08.312.5 HJ 212 FOR SKF NU 212EC PC 2 3 5Quoted /

Non Quoted

476 58.06.08.312.8 BEARING N312 ECP/C3 PC 1 0 1Quoted /

Non Quoted

477 58.06.08.313.5 HJ 216 FOR SKF NU 216 EC PC 1 0 1Quoted /

Non Quoted

Page 15 of 24


(Rs.)HSN No.

478 58.06.08.314.5 HJ 218 FOR SKF NU 218 EC PC 1 0 1Quoted /

Non Quoted


Non Quoted

480 58.06.08.317.7 BRG ROLLER NU217 ECJ 85MM 150MM EA 1 9 10Quoted /

Non Quoted

481 58.06.08.404.5 BRG ROLLER NU205ECJ 25MM 52MM EA 0 3 3Quoted /

Non Quoted


Non Quoted

483 58.06.08.411.7 BRG ROLLER NU211ECJ + HJ211EC 55MM 100MM EA 0 3 3Quoted /

Non Quoted

484 58.06.08.417.5 BRG ROLLER NU219ECJC3 95MM 170MM 32MM EA 0 4 4Quoted /

Non Quoted

485 58.06.08.418.5 BRG ROLLER NU219ECJ 95MM 170M EA 0 3 3Quoted /

Non Quoted

486 58.06.08.419.7 BRG ROLLER NU219ECJ + HJ219EC 95MM 170M EA 0 3 3Quoted /

Non Quoted

487 58.06.08.432.5 BRG ROLLR M NU232ECMA 160MM 290MM PC 1 0 1Quoted /

Non Quoted

488 58.06.08.436.5 BRG ROLLR M NU236ECMA 180MM 320MM PC 1 0 1Quoted /

Non Quoted

489 58.06.08.616.5 BRG ROLLR M NJ216ECJ 80MM 140MM PC 1 5 6Quoted /

Non Quoted

490 58.06.08.706.5 BRG ROLLER NU207ECJ 35MM 72M EA 0 8 8Quoted /

Non Quoted

491 58.06.08.808.5 BRG ROLLR M NU208ECP 40MM 80MM PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

496 58.06.08.815.5 BRG ROLLER NU213ECMC3 65MM 120MM EA 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted

499 58.06.08.819.5 BRG ROLLR MTR NU218ECMC3 90MM 160MM PC 5 0 5Quoted /

Non Quoted


Non Quoted


Non Quoted

502 58.06.10.114.5 BRG ROLLR I MRJ1.3/4 4.1/4IN PC 4 0 4Quoted /

Non Quoted

503 58.06.11.109.5 BRG ROLLR MTR N309ECP 45MM 100MM PC 1 0 1Quoted /

Non Quoted

504 58.06.11.209.7 BRG ROLLER N309ECM/VQ250/R820 EA 0 4 4Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

Page 16 of 24


(Rs.)HSN No.


Non Quoted


Non Quoted


Non Quoted


Non Quoted

514 58.06.11.407.5 BRG ROLLR M NU307ECJ 35MM 80MM PC 3 6 9Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

520 58.06.11.416.7 BRG ROLLER SKF NU316ECM 80MM 170MM EA 0 4 4Quoted /

Non Quoted

521 58.06.11.417.5 BRG ROLLR MTR NU316 ECJ 80MM 170MM PC 4 0 4Quoted /

Non Quoted

522 58.06.11.422.5 BRG ROLLR M NU322ECM 110MM 240MM PC 2 0 2Quoted /

Non Quoted

523 58.06.11.630.5 BRG ROLLER NJ2309 45MM 100MM EA 2 0 2Quoted /

Non Quoted

524 58.06.11.662.5 BRG ROLLR M NJ312ECP 60MM 130MM PC 1 0 1Quoted /

Non Quoted

525 58.06.11.713.7 BRG ROLLER NUP313ECJ 65MM 140MM EA 1 3 4Quoted /

Non Quoted

526 58.06.11.805.5 BRG ROLLR NU305ECP 25MM 62MM PC 7 3 10Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

Page 17 of 24


(Rs.)HSN No.

542 58.06.11.822.5 *DNR* BRG ROLLR M NU322ECJ 110MM 240MM PC 1 0 1Quoted /

Non Quoted


Non Quoted

544 58.06.11.825.5 BRG ROLLR MTR NU324ECM 120MM 260MM PC 1 0 1Quoted /

Non Quoted

545 58.06.11.828.5 BRG ROLLER NU314C3 EA 4 20 24Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

555 58.06.11.916.5 BRG ROLLER NU316ECM 80MM 170MM EA 0 3 3Quoted /

Non Quoted


Non Quoted


Non Quoted

558 58.06.11.950.5 BRG ROLLER NUP2206 30MM 62MM EA 0 4 4Quoted /

Non Quoted

559 58.06.14.412.5 BRG ROLLER NU413 65MM 160MM EA 0 3 3Quoted /

Non Quoted

560 58.06.14.413.5 BRG ROLLR MTR NU 413 65MM 160MM PC 4 3 7Quoted /

Non Quoted

561 58.06.80.010.5 "BEARING,NU222ECM" PC 1 0 1Quoted /

Non Quoted

562 58.06.80.011.5 "BEARING,NU217M" PC 1 0 1Quoted /

Non Quoted

563 58.06.80.012.5 "BEARING,NU317P63" PC 1 0 1Quoted /

Non Quoted

564 58.06.80.013.5 "BEARING,NU226" PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted

567 58.06.80.016.5 "BEARING,NU221C3" PC 2 0 2Quoted /

Non Quoted

568 58.06.80.017.5 "BEARING,NU218MC3" PC 1 0 1Quoted /

Non Quoted

569 58.06.80.018.5 "BEARING,NU224M,SKF" PC 1 0 1Quoted /

Non Quoted


Non Quoted

571 58.06.80.020.5 BRG NU219M PC 1 0 1Quoted /

Non Quoted

572 58.06.80.021.5 "BEARING,ROLLER,NU232M,SKF" PC 1 0 1Quoted /

Non Quoted


Non Quoted

Page 18 of 24


(Rs.)HSN No.


Non Quoted

575 58.06.80.024.5 "BEARING,ROLLER,NU216ECM" PC 2 0 2Quoted /

Non Quoted

576 58.06.80.025.5 "BEARING,ROLLER,NU219ECM" PC 1 3 4Quoted /

Non Quoted

577 58.06.89.088.7 BRG ROLLER B88-OH 11/16IN EA 0 14 14Quoted /

Non Quoted

578 58.06.89.210.7 BRG ROLLER BA1210 1IN EA 0 6 6Quoted /

Non Quoted

579 58.06.89.212.7 BRG ROLLER BA1212Z 1IN EA 0 4 4Quoted /

Non Quoted

580 58.06.89.812.7 BRG ROLLER B812 11/16 EA 0 8 8Quoted /

Non Quoted

581 58.07.01.424.5 BRG ROLLER 23024CCW33 120MM 180MM EA 0 4 4Quoted /

Non Quoted

582 58.07.07.229.5 BRG ROLLER 22226E EA 1 3 4Quoted /

Non Quoted

583 58.07.07.230.5 BRG ROLLER 22224E EA 1 3 4Quoted /

Non Quoted

584 58.07.07.309.7 BRG ROLLER 22209E 45MM 85MM EA 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted

587 58.07.07.323.7 BRG ROLLER 22222EK+H322 110MM 200MM EA 1 4 5Quoted /

Non Quoted

588 58.07.07.511.5 BRG ROLLR MTR 22212CC/C3 W33 PC 7 0 7Quoted /

Non Quoted

589 58.07.07.512.5 BRG ROLLR M 22212E 60MM 110MM PC 2 0 2Quoted /

Non Quoted

590 58.07.07.513.5 BRG ROLLR MTR 22213CCK/W33 W/H313 SLEEVE PC 1 0 1Quoted /

Non Quoted

591 58.07.07.514.5 BRG ROLLR MTR 22214E/C3 PC 1 0 1Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

596 58.07.07.519.5 "HOUSING FOR 22217 BRG,SOFN 217,TLT,3&4" PC 2 0 2Quoted /

Non Quoted

597 58.07.07.520.5 BRG ROLLR MTR 22220 ESTVPBC3 PC 1 0 1Quoted /

Non Quoted

598 58.07.07.521.5 BRG ROLLR MTR 2214 PC 1 0 1Quoted /

Non Quoted

599 58.07.07.522.5 BRG ROLLR MTR 2218C3 PC 1 0 1Quoted /

Non Quoted

600 58.07.07.523.5 BRG ROLLR MTR 22216EK WITH SLEEVE H 316 PC 1 0 1Quoted /

Non Quoted


Non Quoted

602 58.07.07.525.5 BRG ROLLR MTR 22218E PC 1 0 1Quoted /

Non Quoted

603 58.07.07.526.5 "BEARING,ANTIFRICTION,22214,SKF,PN:3&4" PC 1 0 1Quoted /

Non Quoted

604 58.07.07.527.5 "HOUSING FOR 22214 SKF BEARING,PN:3&4" PC 1 0 1Quoted /

Non Quoted


Non Quoted

Page 19 of 24


(Rs.)HSN No.


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

613 58.07.10.522.5 BRG ROLLR MTR 22320E/C3 100MM 215MM PC 1 0 1Quoted /

Non Quoted

614 58.07.15.520.5 BRG ROLLER SPHERICAL 232202-CS/VT143 EA 0 3 3Quoted /

Non Quoted

615 58.07.15.521.5 BRG ROLLER 22217E 85MM 150MM PC 2 0 2Quoted /

Non Quoted


Non Quoted

617 58.07.30.519.5 BRG ROLLR M 22319EK 85MM 200MM PC 1 0 1Quoted /

Non Quoted

618 58.07.30.520.5 BRG ROLLR MTR 22319C PC 1 0 1Quoted /

Non Quoted

619 58.07.30.707.7 BRG ROLLER 22207EK 35MM 72MM EA 1 3 4Quoted /

Non Quoted

620 58.07.30.711.7 BRG ROLLER 22211EK 55MM 100MM EA 1 3 4Quoted /

Non Quoted

621 58.07.30.719.5 SKF BEARING 22322EK WITH TAPER SLEEVE PC 1 0 1Quoted /

Non Quoted

622 58.07.30.720.5 BRG ROLLR M 22320EK 100MM 215MM PC 1 3 4Quoted /

Non Quoted

623 58.07.30.721.7 BRG ROLLER 22220EK +H320 100MM 180MM EA 1 3 4Quoted /

Non Quoted

624 58.08.07.202.5 BRG ROLLR M 30202 JZ -- -- PC 1 0 1Quoted /

Non Quoted

625 58.08.07.204.5 BRG ROLLR MTR 30204 J2/Q 20MM 47MM PC 4 3 7Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

629 58.08.07.222.5 BRG ROLLR MTR 30222 J2 110MM 200MM PC 1 3 4Quoted /

Non Quoted

630 58.08.07.310.5 BRG ROLLR MTR 30210J2 50MM 90MM PC 1 3 4Quoted /

Non Quoted

631 58.08.07.313.5 BRG ROLLR MTR 30213J2 65MM 120MM PC 6 0 6Quoted /

Non Quoted

632 58.08.07.319.7 BRG ROLLER 30219J2 95MM 170MM EA 1 3 4Quoted /

Non Quoted


Non Quoted

634 58.08.07.515.5 BRG ROLLR MTR 33215 Q 75MM 130MM PC 1 0 1Quoted /

Non Quoted

635 58.08.07.602.7 BRG ROLLER 30202 EA 1 10 11Quoted /

Non Quoted

636 58.08.07.606.7 BRG ROLLER 30206J2/Q 30MM 62MM EA 1 3 4Quoted /

Non Quoted


Non Quoted

Page 20 of 24


(Rs.)HSN No.


Non Quoted


Non Quoted

640 58.08.07.721.7 BRG ROLLER 30221 J2 105MM 190MM EA 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

645 58.08.10.405.7 BRG ROLLER 30305C 25MM 62MM EA 1 4 5Quoted /

Non Quoted

646 58.08.10.406.7 BRG ROLLER 30306J2/QCLN 30MM 72MM EA 1 6 7Quoted /

Non Quoted


Non Quoted


Non Quoted

649 58.08.19.105.5 BRG TAPER ROLLER 31313A 65MM 140MM 36MM EA 0 4 4Quoted /

Non Quoted

650 58.08.19.113.5 BRG TAPER ROLLER 32013 EA 0 4 4Quoted /

Non Quoted

651 58.08.19.115.5 BRG TAPER ROLLER 32015X/Q 75MM 115MM 25M EA 0 6 6Quoted /

Non Quoted

652 58.08.19.120.7 BRG ROLLER SKF 32020 100MM 150MM EA 1 3 4Quoted /

Non Quoted

653 58.08.19.205.5 BRG TAPER ROLLER 32205 25MM 52MM 1 EA 0 3 3Quoted /

Non Quoted

654 58.08.19.207.5 BRG ROLLER 32207J2/Q 35MM 72MM PC 1 3 4Quoted /

Non Quoted


Non Quoted


Non Quoted

657 58.08.19.212.7 BRG ROLLER 330201/Q ( 32212 J2/Q) EA 1 3 4Quoted /

Non Quoted

658 58.08.19.213.5 BRG ROLLR MTR 330356 B 65MM 120MM PC 1 0 1Quoted /

Non Quoted

659 58.08.19.214.7 BRG ROLLER 330356 B/Q (32213J2/Q) EA 1 3 4Quoted /

Non Quoted

660 58.08.19.216.5 BRG TAPER ROLLER 32216 EA 1 4 5Quoted /

Non Quoted


Non Quoted

662 58.08.19.218.5 BRG ROLLER TAPERED 32218J2/Q EA 1 3 4Quoted /

Non Quoted

663 58.08.19.323.5 BRG TAPER ROLLER 32309J2/Q EA 0 4 4Quoted /

Non Quoted

664 58.08.19.446.5 BRG TAPER ROLLER L44643/44610Q EA 0 4 4Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

Page 21 of 24


(Rs.)HSN No.

670 58.08.22.512.7 BRG ROLLER 32312J2Q 60MM 130MM EA 1 3 4Quoted /

Non Quoted


Non Quoted

672 58.08.55.309.7 BRG ROLLER 31309/QCL7C 45MM 100MM EA 1 4 5Quoted /

Non Quoted

673 58.08.55.408.7 BRG ROLLER 31308J2/QCL7CDF EA 1 32 33Quoted /

Non Quoted

674 58.08.55.410.5 BRG ROLLR MTR 31310J2QCL 50MM 110MM PC 2 0 2Quoted /

Non Quoted

675 58.08.55.411.5 BRG ROLLR MTR 31311J2Q 55MM 120MM PC 2 0 2Quoted /

Non Quoted

676 58.08.55.412.5 BRG ROLLR MTR 31310J2/QCL7CDF03 PC 1 0 1Quoted /

Non Quoted

677 58.08.55.413.5 BRG ROLLR MTR 31312J2DF 60MM 130MM PC 1 20 21Quoted /

Non Quoted

678 58.08.55.512.7 BRG ROLLER 31312J2/QDF 60MM 130MM EA 1 30 31Quoted /

Non Quoted

679 58.09.28.208.5 BRG CONE&CUP 3188S/3120 EA 0 6 6Quoted /

Non Quoted

680 58.09.28.290.7 BRG CONE&CUP 48290/48220 EA 2 4 6Quoted /

Non Quoted

681 58.09.28.414.5 BRG CONE&CUP HM813844/HM813810 EA 1 4 5Quoted /

Non Quoted

682 58.09.28.651.5 BRG CONE&CUP 15250 / 15101 EA 0 6 6Quoted /

Non Quoted

683 58.09.28.670.5 BRG CUP&CONE K42381/42584 ST 0 6 6Quoted /

Non Quoted

684 58.09.28.742.5 BRG CONE&CUP 749A/TS742D EA 0 3 3Quoted /

Non Quoted


Non Quoted

686 58.09.28.928.7 BRG CONE&CUP 9285/9220 SET 4 6 10Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

691 58.10.80.176.7 BRG CONE&CUP LM48548/510/Q EA 0 3 3Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted


Non Quoted

701 58.11.30.146.5 BRG ROLLER AXK1109+AS1109 45MM 65MM 4MM EA 0 3 3Quoted /

Non Quoted

Page 22 of 24


(Rs.)HSN No.

702 58.11.30.322.5 BRG ROLLR MTR 29322 E 110 MM 190MM PC 3 5 8Quoted /

Non Quoted


Non Quoted

704 58.11.30.328.7 BRG ROLLER 29328E 140 240MM EA 0 3 3Quoted /

Non Quoted

705 58.11.30.332.5 BRG ROLLR M 29332 E 160MM 270MM PC 2 0 2Quoted /

Non Quoted

706 58.11.30.426.5 BRG ROLLR M 29426 E 130MM 270MM PC 2 0 2Quoted /

Non Quoted

707 58.11.30.500.5 BRG ROLLER THRUST 51113 65MM 90MM 18MM EA 0 4 4Quoted /

Non Quoted

708 58.12.20.301.5 "PLUMMER BLOCK BEARRING,SKF SYJ 60 TF" PC 8 0 8Quoted /

Non Quoted

709 58.12.20.340.5 "BEARRING,SKF, FYJ 60 TF" PC 1 0 1Quoted /

Non Quoted

710 58.12.20.350.5 BEARRING,SKF, FYJ 70 TF PC 1 0 1Quoted /

Non Quoted

711 58.12.20.606.7 BRG UNIT Y YET-206 30MM 62MM EA 0 5 5Quoted /

Non Quoted

712 58.12.20.806.7 BRG UNIT HOUSING SY 506 M EA 0 3 3Quoted /

Non Quoted

713 58.12.90.420.5 SLEEVE,ADAPTOR W/LOCK/NUT/WASHER,H-2320 PC 4 0 4Quoted /

Non Quoted

714 58.22.54.070.5 BRG TAPERED ROLLER 30228J2 EA 0 5 5Quoted /

Non Quoted

715 58.60.19.066.5 BRG YAR 2062F EA 0 5 5Quoted /

Non Quoted


Non Quoted


Non Quoted


Non Quoted

719 58.72.97.028.5 UPPER TAPER ROLLER BEARING ST 1 0 1Quoted /

Non Quoted

720 58.72.97.029.5 LOWER TAPER ROLLER BEARING ST 1 0 1Quoted /

Non Quoted

721 58.72.97.030.5 INNER TAPER ROLLER BEARING ST 1 0 1Quoted /

Non Quoted

722 58.72.97.031.5 OUTER TAPER ROLLER BEARING ST 1 0 1Quoted /

Non Quoted

723 58.72.97.032.5 UPPER TAPER ROLLER BRG,INTERSTAGE SHAFT ST 4 0 4Quoted /

Non Quoted

724 58.72.97.033.5 LOWER TAPER ROLLER BRG,INTERSTAGE SHAFT ST 3 0 3Quoted /

Non Quoted

725 58.72.97.035.5 ROLLER BEARING,HH221410D-HH221430 ST 1 0 1Quoted /

Non Quoted

726 58.72.97.036.5 TAPER ROLLER BEARING;30226A PC 2 0 2Quoted /

Non Quoted

727 58.72.97.037.5 TAPER ROLLER BEARING;30317A PC 2 0 2Quoted /

Non Quoted

728 58.98.99.509.8 SYJ 1. 1/4 TF PLUMMER BLOCK BEARING PC 15 25 40Quoted /

Non Quoted

729 58.99.99.130.8 ANGULAR CONTACT BEARING,QJM-4&1/2 PC 1 0 1Quoted /

Non Quoted

730 58.99.99.462.8 ROLLAR BEARING,SKF,NU326 M 130MM 280MM PC 1 0 1Quoted /

Non Quoted

731 58.99.99.470.8 BEARING 182932SLC3 PC 2 0 2Quoted /

Non Quoted

732 58.99.99.485.8 THRUST BALL BEARING 51134 PC 2 0 2Quoted /

Non Quoted

733 58.99.99.502.8 NU236 ECMA C3 ROLLER BEARING ST 1 0 1Quoted /

Non Quoted

Page 23 of 24


(Rs.)HSN No.

734 58.99.99.538.8 BEARING 16038C3 NO 1 0 1Quoted /

Non Quoted

735 58.99.99.539.8 BEARING NU1038M1 NO 2 0 2Quoted /

Non Quoted

Page 24 of 24

Page 1 of 1

Annexure-2

SUB : Annual Rate Contract for Supply of Bearings for BPCL-Mumbai Refinery and

BPCL-Kochi Refinery


• LIST OF ITEMS WITH DETAIL DESCRIPTION &

SPECIFICATION OF THE ITEMS. (REQUEST FOR

QUOTATION CRFQ-1000285313)

This Annexure is only for detail descriptions &

specifications of the items. Bidders are requested not to

fill any prices, GST, freight etc. in this Annexure.

_______________________________________________________________________ Item Material RFQ Qty Unit Unit Price

Description Delivery date Value

Amount in Words_______________________________________________________________________00010 31.74.07.022.5 2 each

BALL BEARING V30-11 SUJ2 ISWP101AB 30.09.2018

Name BALL BEARING

"Mat SUJ2,A295"

Manufacturer DMW CORPORATION

Reference-number V30-11

Equipment-number ISWP101AB

"ITEM:BALL BEARING;MATERIAL:SUJ2,A295;MAKE:DMW CORPORATION;PART"

NO:V30-11;TAG NO:ISWP101AB;DWG NO:11-VS6T123-00009X;MODEL:250X250

VPFC-WR2-M_______________________________________________________________________00020 58.00.04.619.7 3 each

BRG BALL 6019C4 95MM 145MM 30.09.2018

Bearings;Ball

Type radial contact

Series Explorer DGBB

Rows single

Design-spec DIN 625

Design-spec ISO 15

Style extra light type deep groove

Mat-cage PRESSED STEEL

Designation number 6019 C4

Type-of-bore-mm 95

Diameter-od-mm 145

Width-height-mm 24_______________________________________________________________________00030 58.00.04.621.7 6 each

BRG BALL 6021C4 105MM 160MM 30.09.2018

Bearings;Ball

Type radial contact


Rows single

Design-spec DIN 625

Design-spec ISO 15

Style deep groove



To,

BPCL ESTIMATE

MUMBAI . India - 400038.

Ph : , Fax : .

Vendor Code:300648

Quotation Due Date:16.08.2017

For Bharat Petroleum Corporation Ltd.

REQUEST FOR QUOTATION Collective RFQ Number / Date

1000285313 / 21.07.2017

Contact person/Telephone

Ref CPO Proc GR 2

Fax :

RFQ No / Date : 6001081494 / 18.07.2017

Page 1 of 224

Item Material RFQ Qty Unit Unit Price


Amount in Words_______________________________________________________________________Type-of-bore-mm 105

Diameter-od-mm 160

Width-height-mm 26_______________________________________________________________________00040 58.00.07.606.5 6 Piece

BRG BALL MTR 6206C3 30MM 62MM 30.09.2018

BRG BALL MTR 6206C3 30MM 62MM

BEARINGS; BALL; METRIC

Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15

Style light type deep groove


Designation-skf-number 6206 C3

Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16

Equivalent FAG Tag No : 6206.C3_______________________________________________________________________00050 58.00.07.607.5 21 Piece



Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 72

Width-height-mm 17




Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15


RFQ Number :6001081494 Date : 18.07.2017To: BPCL ESTIMATE MUMBAI - 400038 India

For Bharat Petroleum Corporation Ltd.Page 2 of 224



Amount in Words_______________________________________________________________________Mat-cage PRESSED STEEL


Type-of-bore-mm 40

Diameter-od-mm 80

Width-height-mm 18




Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 85

Width-height-mm 19




Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 90

Width-height-mm 20





Type radial contact

Series 6200 C3

Rows single





Amount in Words_______________________________________________________________________Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22




BEARING; BALL; METRIC

Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 130

Width-height-mm 25




Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 140

Width-height-mm 26

Equivalent FAG Tag No : 6216.C3_______________________________________________________________________00120 58.00.07.617.7 31 each

BRG BALL 6217C3 85MM 150MM 30.09.2018

BRG BALL 6217C3 85MM 150MM





Amount in Words_______________________________________________________________________Bearings;Ball

Type radial contact


Rows single

Design-spec ISO 15

Style DEEP GROOVE



Type-of-bore-mm 85

Diameter-od-mm 150

Width-height-mm 28





Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 90

Diameter-od-mm 160

Width-height-mm 30


BRG BALL 6221C3 105MM 190MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Design-spec DIN 625

Design-spec ISO 15

Style DEEP GROOVE



Type-of-bore-mm 105

Diameter-od-mm 190

Width-height-mm 36

Equivalent FAG Tag No : 6221.C3_______________________________________________________________________






BRG BALL 6224C3 120MM 215MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Design-spec DIN 625

Design-spec ISO 15

Style DEEP GROOVE



Type-of-bore-mm 120

Diameter-od-mm 215

Width-height-mm 40


BRG BALL MTR 6236 C3E 180MM 320MM 30.09.2018

BRG BALL MTR 6236 C3E 180MM 320MM

Type radial contact

Series 6200 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15



Designation-skf-number 6236 C3E

Type-of-bore-mm 180

Diameter-od-mm 320

Width-height-mm 52

Equivalent FAG Tag No : 6236M.C3_______________________________________________________________________00170 58.00.07.664.5 22 Piece

BRG BALL MTR 6215 NR/C3 75mm 130mm 30.09.2018

Type radial contact

Series 6200 N C3

Rows single

Design-spec DIN 625

Design-spec ISO 15

Design-spec ISO 464

Style deep groove w/snap ring


Designation-skf-number 6215 NR/C3

Type-of-bore-mm 75





Amount in Words_______________________________________________________________________Diameter-od-mm 130


BRG BALL 6210 2ZC3 50MM 90MM 30.09.2018

BRG BALL 6210 2ZC3 50MM 90MM

Bearings;Ball

Type radial contact


Rows single

Design-spec DIN 625

Design-spec ISO 15

Style with both side metal shield


Designation number 6210-2Z/C3

Type-of-bore-mm 50

Diameter-od-mm 90

Width-height-mm 20

Equivalent FAG Tag No : 6210.2ZR.C3_______________________________________________________________________00190 58.00.07.906.7 87 each

BRG BALL 6205 2ZC3 25MM 52MM 30.09.2018

BRG BALL 6205 2ZC3 25MM 52MM

Bearings;Ball

Type radial contact


Rows single

Design-spec DIN 625

Design-spec ISO 15

Style with both shields


Designation number 6205-2Z/C3

Type-of-bore-mm 25

Diameter-od-mm 52

Width-height-mm 15

Equivalent FAG Tag No : 6205 2ZR.C3_______________________________________________________________________00200 58.00.10.616.5 21 Piece

BRG BALL MTR 6216 C3 80MM 140MM 30.09.2018

BRG BALL MTR 6216 C3 80MM 140MM

Type radial contact

Series 6200 C4

Rows single

Design-spec DIN 625

Style LIGHT TYPE DEEP GROOVE






Amount in Words_______________________________________________________________________Designation-skf-number 6216 C3

Type-of-bore-mm 80

Diameter-od-mm 140

Width-height-mm 26


BRG BALL 6304C3 20MM 52MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Design-spec DIN 625

Design-spec ISO 15

Style deep groove



Type-of-bore-mm 20

Diameter-od-mm 52

Width-height-mm 15


BRG BALL 6305C3 25MM 62MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Style deep groove



Type-of-bore-mm 25

Diameter-od-mm 62

Width-height-mm 17


BRG BALL MTR 6306C3 30.09.2018

BRG BALL MTR 6306C3

Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15





Amount in Words_______________________________________________________________________Style medium type deep groove







Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15

Style medium type deep groove



Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 21





Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23


BRG BALL MT 6309C3 45MM 100MM 30.09.2018

BRG BALL MT 6309C3 45MM 100MM


Type radial contact

Series 6300 C3

Rows single






Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25





Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27





Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29







Amount in Words_______________________________________________________________________BRG BALL MTR 6312C3 60MM 130MM


Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31





Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33


BRG BALL MT 6314C3 70MM 150MM 30.09.2018



Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 70

Diameter-od-mm 150





Amount in Words_______________________________________________________________________Width-height-mm 35


BRG BALL MT 6315C3 75MM 160MM 30.09.2018



Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37


BRG BALL MT 6316C3 80MM 170MM 30.09.2018



Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39


BRG BALL MT 6317C3 85MM 180MM 30.09.2018



Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15








Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41


BRG BALL MT 6318C3 90MM 190MM 30.09.2018



Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 90

Diameter-od-mm 190

Width-height-mm 43


BRG BALL MT 6319C3 95MM 200MM 30.09.2018



Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 95

Diameter-od-mm 200

Width-height-mm 45


BRG BALL MT 6320C3 100MM 215MM 30.09.2018







Amount in Words_______________________________________________________________________Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 100

Diameter-od-mm 215

Width-height-mm 47


BRG BALL MT 6321C3 105MM 225MM 30.09.2018


Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 105

Diameter-od-mm 225

Width-height-mm 49


BRG BALL MT 6322C3 110MM 240MM 30.09.2018



Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 50

Equivalent FAG Tag No : 6322.C3_______________________________________________________________________





Amount in Words_______________________________________________________________________00400 58.00.13.624.5 7 Piece

BRG BALL MT 6324C3 120MM 260MM 30.09.2018



Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 120

Diameter-od-mm 260

Width-height-mm 55

Equivalent FAG Tag No : 6324M.C3_______________________________________________________________________00410 58.00.13.626.7 4 each

BRG BALL 6326-MC3 130MM 280 30.09.2018

Bearings;Ball;Metric

Type radial contact


Rows single

Style deep groove

Mat-cage BRASS

Designation number 6326 MC3

Type-of-bore-mm 130

Diameter-od-mm 280


BRG BALL SKF/EQ 6310-2ZC3 50MM 110MM 30.09.2018

BRG BALL SKF/EQ 6310-2ZC3 50MM 110MM


Type radial contact

Series 6300 2Z C3

Rows single

Design-spec DIN 625

Design-spec ISO 15

Style deep groove with one shield


Designation-skf-number 6310 2Z C3

Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27





Amount in Words_______________________________________________________________________BEARING BALL

SKF 6310 Z /FAG 6310 ZR / NTN 6310 Z

Equivalent FAG Tag No.6310 2ZR.C3_______________________________________________________________________00430 58.00.13.711.5 3 each

BRG BALL 6410C3 50MM 130MM 31MM 30.09.2018

BEARING BALL 6410 C3

DEEP GROOVE BALL BEARING SINGLE ROW

WITH C3 CLEARANCE

Type-of-bore-mm : 50

Diameter-od-mm : 130

Width-height-mm : 31_______________________________________________________________________00440 58.00.13.712.7 24 each

BRG BALL 63122ZC3 60MM 130MM 30.09.2018

BRG BALL 63122ZC3 60MM 130MM

Bearings;Ball

Type radial contact

Series 6300 2Z C3

Rows single

Style with both side shield


Designation number 6312- 2Z /C3

Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No : 6312.2ZR.C3_______________________________________________________________________00450 58.00.13.817.5 1 Piece

BRG BALL MTR 6317P63 85MM 180MM 30.09.2018

BRG BALL MTR 6317P63 85MM 180MM

Type radial contact

Series 6300 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15


Mat-cage GLASS FIBRE REINF.POLYAMIDE

Designation-skf-number 6317 P63

Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41

"MAKE:FAG, SKF OR EQUIVALENT"

Equivalent FAG Tag No : 6317.P63_______________________________________________________________________






BRG BALL 63132ZC3 65MM 140MM 30.09.2018


Bearings;Ball

Type radial contact

Series 6300 2Z C3

Rows single

Style with both side shields


Designation number 6313-2Z /C3

Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33


BRG BALL 63142ZC3 70MM 150MM 30.09.2018


Bearings;Ball

Type radial contact

Series 6300 2ZC3

Rows single



Designation number 6314- 2Z/C3

Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35


BRG BALL 63162ZC3 80MM 170MM 30.09.2018


Name BEARINGS BALL

DESIGNATION NO. : 63162ZC3

INSIDE DIAMETER : 80MM

OUTSIDE DIAMETER : 170MM

WIDTH : 39MM

Equivalent FAG Tag No.6316 2ZR.C3_______________________________________________________________________00490 58.00.15.408.7 5 each

BRG BALL 63082RS1C3 40MM 90MM 30.09.2018

Bearings;Ball

Type radial contact

Series 6300-2RS1 C3





Amount in Words_______________________________________________________________________Rows single

Style with both side rubber seal


Designation number 6308-2RS1/ C3

Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23

Equivalent FAG Tag No.6308 2RSR.C3_______________________________________________________________________00500 58.00.15.409.7 5 each

BRG BALL 63092RS1C3 45MM 100MM 30.09.2018

BRG BALL 63092RS1C3 45MM 100MM

Bearings;Ball

Type radial contact

Series 6300-2RS1 C3

Rows single




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25


BRG BALL 63102RS1C3 50MM 110MM 30.09.2018

Bearings;Ball

Type radial contact

Series 6300-2RS1 C3

Rows single




Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27


BRG BALL THRUST 51118 90MM 120MM 22MM 30.09.2018

THRUST BALL BEARING

ID: 90 MM

OD: 120MM

WIDTH: 22MM

BEARING NO: 51118_______________________________________________________________________






BRG BALL 6403C3 17MM 62MM 30.09.2018

Bearings;Ball

Type radial contact

Series 6400 C3

Rows single

Style deep groove


Designation number 6403 /C3

Type-of-bore-mm 17

Diameter-od-mm 62


BRG BALL MT 6409C3 45MM 120MM 30.09.2018


Type radial contact

Series 6400 C3

Rows single

Design-spec DIN 625

Design-spec ISO 15

Style heavy type deep groove



Type-of-bore-mm 45

Diameter-od-mm 120

Width-height-mm 29


BRG 22309E SKF 30.09.2018

BRG 22309E SKF

"Name BEARING, 22309E"

Manufacturer SKF

Equivalent FAG Tag No.22309 E1_______________________________________________________________________00560 58.00.19.089.5 10 Piece

BALL BEARING - 6309-2RS 30.09.2018

BALL BEARING - 6309-2RS

MOC : STEEL

BEARINGS FOR KPCL PACKAGE MOTORS

MANUFACTURER : FAG/NRB/SKF

LOCATION : CCR





Amount in Words_______________________________________________________________________

_______________________________________________________________________00570 58.00.19.092.5 6 Piece

BALL BEARING - 6206 ZZ C3 30.09.2018

BALL BEARING - 6206 ZZ C3

MOC : STEEL

BEARINGS FOR KOBE PACKAGE

MANUFACTURER : FAG/NRB/SKF

LOCATION : CCR

_______________________________________________________________________00580 58.00.25.050.5 5 each

BRG PILLOW BLOCK SKF SYJ60TF/NSK UCP212 30.09.2018

BRG PILLOW BLOCK SKF SYJ60TF/NSK UCP212

Name PILLOW BLOCK BEARING

Manufacturer SKF SYJ60 TF (TWO BOLT PILLOW BLOCK)

OR NSK UCP212D1 (MM SIZE)

Equivalent FAG Tag No.UCP 212_______________________________________________________________________00590 58.00.77.208.5 2 Piece

BRG ROLLR MTR NU208ECKP/C3 40MM 80MM 30.09.2018

BRG ROLLR MTR NU208ECKP/C3 40MM 80MM

Type cylindrical

Series NU 200 C3

Rows single

Design-spec ISO 15

"Style TAPERED,DBL.RIBBED OUTER RING"


Designation-skf-number NU 208 ECKP/C3

Type-of-bore-mm 40

Diameter-od-mm 80

Width-height-mm 18

Equivalent FAG Tag No : NU208EK.TVP2.C3_______________________________________________________________________00600 58.00.77.218.5 1 Piece

BRG ROLLR MTR N218ECP 90MM 160MM 30.09.2018

BRG ROLLR MTR N218ECP 90MM 160MM

Type cylindrical

Series N 200 C3

Rows single

Design-spec ISO 15

Style double ribbed inner ring





Amount in Words_______________________________________________________________________Mat-cage GLASS FIBRE REINF.POLYAMIDE6.6

Designation-skf-number N 218 ECP

Type-of-bore-mm 90

Diameter-od-mm 160

Width-height-mm 30

Equivalent FAG Tag No : N218E.TVP2_______________________________________________________________________00610 58.00.77.310.5 1 Piece

BRG ROLLR MTR NU210/ECKP C3 30.09.2018

BRG ROLLR MTR NU210/ECKP C3

Type cylindrical

Series NU 200 C3

Rows single

Design-spec ISO 15

"Style TAPERED,DBL.RIBBED OUTER RING"

Mat-cage GLASS FIBRE REINF.POLYAMIDE6.6

Designation-skf-number NU 210 ECKP C3

Type-of-bore-mm C3

Width-height-mm 17

Equivalent FAG Tag No : NU210EK.TVP2.C3_______________________________________________________________________00620 58.00.77.418.7 9 each

BRG ROLLER NU218ECJC3 90MM 160MM 30.09.2018

BRG ROLLER NU218ECJC3 90MM 160MM

Bearings;Roller

Type cylindrical

Series NU 200 C3

Rows single

Style double ribbed outer ring

Mat-cage STEEL

Designation number NU 218 ECJ /C3

Type-of-bore-mm 90

Diameter-od-mm 160

Width-height-mm 30

Equivalent FAG Tag No : NU218E.M1.C3_______________________________________________________________________00630 58.00.77.506.7 4 each

BRG ROLLER NU206ECKPC3 30MM 62MM 30.09.2018

BRG ROLLER NU206ECKPC3 30MM 62MM

Bearings;Roller

Type cylindrical

Series NU 200 C3

Rows single

Design-spec ISO 15

Style TAPERED BORE- 1:12

Mat-cage POLY AMIDE CAGE





Amount in Words_______________________________________________________________________Designation number NU206 -ECKP/C3

Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 13

Equivalent FAG Tag No.NU206-E-K-TVP2-C3_______________________________________________________________________00640 58.00.77.810.7 4 each



Bearings;Roller

Type cylindrical

Series NU 200 C3

Rows single


Mat-cage STEEL

Designation number NU 210 -ECJ/ C3

Type-of-bore-mm 50

Diameter-od-mm 90

Width-height-mm 20

Equivalent FAG Tag No : NU210-E-JP3-C3_______________________________________________________________________00650 58.00.77.812.5 1 Piece

BRG ROLLR M NU212ECPC3 60MM 110MM 30.09.2018

BRG ROLLR M NU212ECPC3 60MM 110MM

Type cylindrical

Series NU 200 C3

Rows single

Design-spec ISO 15



Designation-skf-number NU 212 ECP C3

Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22

Equivalent FAG Tag No : NU212E.TVP2.C3_______________________________________________________________________00660 58.00.77.814.5 4 Piece

BRG ROLLR NU214ECMC3 70MM 125MM 30.09.2018

BRG ROLLR NU214ECMC3 70MM 125MM

BEARINGS; ROLLER

Type cylindrical

Series NU 200 C3

Rows single


Mat-cage BRASS

Designation number NU 214 ECM/ C3






Diameter-od-mm 125

Width-height-mm 24

Equivalent FAG Tag No : NU214E.M1.C3_______________________________________________________________________00670 58.00.77.815.5 6 Piece

BRG ROLLR NU215ECJC3 75MM 130MM 30.09.2018

BRG ROLLR NU215ECJC3 75MM 130MM

BEARINGS; ROLLER

Type cylindrical

Series NU 200 C3

Rows single


Mat-cage STEEL


Type-of-bore-mm 75

Diameter-od-mm 130

Width-height-mm 25




Bearings;Roller

Type cylindrical

Series NU 200 C3

Rows single


Mat-cage STEEL

Designation number NU 216 ECJ/ C3

Type-of-bore-mm 80

Diameter-od-mm 140

Width-height-mm 26




Type cylindrical

Series NU 200 C3

Rows single

Design-spec ISO 15




Type-of-bore-mm 85






Width-height-mm 28




BEARINGS; ROLLER

Type cylindrical

Series NU 200 C3

Rows single


Mat-cage STEEL

Designation number NU 221 ECJ C3/R821

Type-of-bore-mm 105

Diameter-od-mm 190

Width-height-mm 36




BEARINGS; ROLLER

Type cylindrical

Series NU 200 C3

Rows single


Mat-cage STEEL


Type-of-bore-mm 120

Diameter-od-mm 215

Width-height-mm 40


BRG ROLLR MTR N314ECP/C3 70MM 150MM 30.09.2018

BRG ROLLR MTR N314ECP/C3 70MM 150MM

Type cylindrical

Series N 300 C3

Rows single

Design-spec ISO 15



Designation-skf-number N 314 ECP/C3

Type-of-bore-mm 70

Diameter-od-mm 150






Equivalent FAG Tag No : N314E.TVP2.C3_______________________________________________________________________00730 58.00.81.211.5 29 Piece

BRG ROLLR MTR NU211C3 30.09.2018

BRG ROLLR MTR NU211C3

Type cylindrical

Series NU 300 C3

Rows single

Designation-skf-number NU 211 C3

NU 211C3 SKF BEARING

FOR PUMP

TAG : 132P252A/B / 132P261A/B / 132P290A

LOCATION : LOBS




Type cylindrical

Series NU 300 C3

Rows single


NU 211C3 SKF BEARING

FOR PUMP

TAG : 132P254A/B / 132P255A/B / 132P257A/B

LOCATION : LOBS




Bearings;Roller

Type cylindrical

Series N 300 C3

Rows single

Style DOUBLE RIBBED INNER RING

Mat-cage STEEL

Designation number NU313 ECJ/C3

Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33







Amount in Words_______________________________________________________________________BRG ROLLER NU306ECJC3 30MM 72MM

Bearings;Roller

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage STEEL

Designation number NU306 ECJ /C3

Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19

Equivalent FAG Tag No : NU 306 E.JP1_______________________________________________________________________00770 58.00.81.311.5 31 Piece



BEARINGS; ROLLER

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage STEEL

Designation number NU 311 ECJ/C3

Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29

Equivalent FAG Tag No : NU311E.JP1.C3_______________________________________________________________________00780 58.00.81.313.5 2 Piece

BRG ROLLR MTR NU314ECJ 70MM 150MM 30.09.2018

BRG ROLLR MTR NU314ECJ 70MM 150MM

NU314 ECJ ANTIFRICTION BEARING

Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15


Mat-cage STEEL CAGE

Designation-skf-number NU 314 ECJ

Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35

FOR 133P302A/B

MAKE : SKF BEARINGS

SERIAL_N0 : 102804-01

"EQUIPMENT_MODEL : MAKE-SULZER PUMPS, MODEL-GSG100-300/7"





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : NU314E.M1_______________________________________________________________________00790 58.00.81.314.5 6 Piece

BRG ROLLR MTR NU314ECJ/C3 70MM 150MM 30.09.2018

BRG ROLLR MTR NU314ECJ/C3 70MM 150MM

Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15



Designation-skf-number NU 314 ECJ / C3

Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35




Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37




Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39

Equivalent FAG Tag No : NU316E.M1.C3_______________________________________________________________________








Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15




Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41


BRG ROLLR NU318ECPC3 90MM 190MM 30.09.2018

BRG ROLLR NU318ECPC3 90MM 190MM

"BEARINGS, ROLLER , METRIC"

Type cylindrical

Series NU 300 C3

Rows single

Design spec ISO 15


Mat-cage Glass fibre Reinf. Polyamide 6.6

Designation number NU 318 ECP C3

Type-of-bore-mm 90

Diameter-od-mm 190

Width-height-mm 43

Equivalent FAG Tag No : NU 318 E.M1.C3_______________________________________________________________________00840 58.00.81.319.5 1 Piece



Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15




Type-of-bore-mm 95

Diameter-od-mm 200

Width-height-mm 45









BEARINGS; ROLLER

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage STEEL

Designation number NU 320 ECJ / C3

Type-of-bore-mm 100

Diameter-od-mm 215

Width-height-mm 47


BRG ROLLR MTR NU 220 ECML C3 100MM 180MM 30.09.2018

BRG ROLLR MTR NU 220 ECML C3 100MM 180MM

Type cylindrical

Series NU 200 C3

Rows single

Design-spec ISO 15

Style SKF EXPLORE

Mat-cage BRASS

Designation-skf-number NU 220 ECML C3

Type-of-bore-mm 100

Diameter-od-mm 180

Width-height-mm 34

EQUIPMENT DETAIL : AIR COMPRESSOR MOTOR DE SIDE ROLLER BEARING NU 220

"ECML C3, BRASS CAGE."

TAG NO.: AIR COMPRESSOR AC-7

LOCATION : BOILER HOUSE




Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15




Type-of-bore-mm 120






Width-height-mm 55




Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15




Type-of-bore-mm 130

Diameter-od-mm 280

Width-height-mm 58


BRG ROLLR M NJ308ECPC3 40MM 90MM 30.09.2018

BRG ROLLR M NJ308ECPC3 40MM 90MM

Type cylindrical

Series NJ 300 C3

Rows single

Design-spec ISO 15



Designation-skf-number NJ 308 ECP C3

Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23

Equivalent FAG Tag No : NJ308E.TVP2.C3_______________________________________________________________________00900 58.00.81.410.5 26 Piece



Type cylindrical

Series NU 300 C3

Rows single


SKF 7309 BRG FOR NDE

FOR CENTRIFUGAL PUMP

MFR. : M/S. KSB

MODEL : RPHB HM 50-315/2

SR. NO. : 459622/23





Amount in Words_______________________________________________________________________TAG NO. : 132P265A/B

DW. NO. : F 045962223-2

LOCATION : LOBS

Equivalent FAG Tag No : NU310E.JP1.C3_______________________________________________________________________00910 58.00.81.410.7 31 each



Bearings;Roller

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage STEEL CAGE

Designation number NU310ECJ/ C3

Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27


BRG ROLLER NU312ECMC3 60MM 130MM 30.09.2018

BRG ROLLER NU312ECMC3 60MM 130MM

Bearings;Roller

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage BRASS

Designation number NU312ECM/ C3

Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31




Bearings;Roller

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage STEEL

Designation number NU315ECJ C3

Type-of-bore-mm 75






Width-height-mm 37




Bearings;Roller

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage STEEL

Designation number NU317ECJ /C3

Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41


BRG ROLLR M NU321ECJC3 105MM 225MM 30.09.2018

BRG ROLLR M NU321ECJC3 105MM 225MM

Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15



Designation-skf-number NU 321 ECJ C3

Type-of-bore-mm 105

Diameter-od-mm 225

Width-height-mm 49




BEARINGS; ROLLER

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage STEEL


Type-of-bore-mm 110

Diameter-od-mm 240







BRG ROLLER NU326ECJC3 130MM 280 30.09.2018

BRG ROLLER NU326ECJC3 130MM 280

Bearings;Roller

Type cylindrical

Series NU 300 C3

Rows single


Mat-cage STEEL


Type-of-bore-mm 130

Diameter-od-mm 280

Width-height-mm 58


BRG ROLLR M NU330ECMC3 150MM 320MM 30.09.2018

BRG ROLLR M NU330ECMC3 150MM 320MM

Type cylindrical

Series NU 300 C3

Rows single

Design-spec ISO 15


Mat-cage MACHINED BRASS

Designation-skf-number NU 330 ECM C3

Type-of-bore-mm 150

Diameter-od-mm 320

Width-height-mm 65


BRG ROLLER NJ314ECJC3 70MM 150MM 30.09.2018

BRG ROLLER NJ314ECJC3 70MM 150MM

Bearings;Roller

Type cylindrical

Series N 300 C3

Rows single


Mat-cage STEEL

Designation number NJ314 ECJ/C3

Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : NJ314E.M1.C3_______________________________________________________________________01000 58.00.81.707.7 6 each



Bearings;Roller

Type cylindrical

Series NJ 300 C3

Rows single


Mat-cage STEEL

Designation number NU307 ECJ/C3

Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 21

Equivalent FAG Tag No : NU307 EM1 A C3_______________________________________________________________________01010 58.00.85.410.7 1 each

BRG ROLLER NU2310ECMLC3 50MM 110MM 30.09.2018

BRG ROLLER NU2310ECMLC3 50MM 110MM

Bearings;Roller

Type cylindrical

Series NJ 2300

Rows single

Style wide double ribbed outer ring

Mat-cage Brass

Designation number NU2310 ECML/C3

Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 40


BRG ROLLR MTR NU2212JC3 60MM 110MM 30.09.2018

BRG ROLLR MTR NU2212JC3 60MM 110MM

Type cylindrical

Series NU 2200 C3

Rows single

Design-spec ISO 15

Style wide double ribbed outer ring


Designation-skf-number NU 2212 ECJ C3

Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 28







BRG RADIAL NU310 ECM C3 30.09.2018

BRG RADIAL NU310 ECM C3

Name BEARING; RADIAL

Series Explorer CRB

Manufacturer

Reference-number NU310 ECM C3


BRG ROLLER NJ2310ECMLC3 50MM 110MM 30.09.2018

BRG ROLLER NJ2310ECMLC3 50MM 110MM

Bearings;Roller

Type cylindrical

Series Explorer CRB

Rows single

Design-spec ISO 15

Style LIPS OUTER &SLG FLG INNER RING

Mat-cage BRASS

Designation number NJ2310 ECMLC3

Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 40

Equivalent FAG Tag No.NJ 2310 E.M1.C3_______________________________________________________________________01050 58.00.90.022.5 2 Piece

BRG ROLLR MTR 23022CC/W33 110MM 170MM 30.09.2018

Type spherical

Series 230

Rows double

Design-spec ISO 15

Style LIGHT TYPE


Designation-skf-number 23022 CC/W33

Type-of-bore-mm 110

Diameter-od-mm 170

Width-height-mm 45

SKF 23022 CC/W33 SPHERICAL ROLLER BEARING FOR 132P203A/B_______________________________________________________________________01060 58.00.90.024.5 1 Piece

BRG ROLLR MTR 23024 CC/C3W33 110MM 180MM 30.09.2018

Type spherical

Series 230 CC/C3

Rows double

Design-spec ISO 15





Amount in Words_______________________________________________________________________Style LIGHT TYPE


Designation-skf-number 23024 CC/C3W33

Type-of-bore-mm 110

Diameter-od-mm 180

Width-height-mm 46

"BEARING,ROLLER,METRIC"

MODEL : 23024 CC/C3

MFR : SKF

SPARE FOR AGITATOR AND GEAR BOX

LOCATION : BBU_______________________________________________________________________01070 58.00.90.030.5 1 Piece

BRG ROLLR MTR 23030 CC/C3W33 135MM 225MM 30.09.2018

BRG ROLLR MTR 23030 CC/C3W33 135MM 225MM

Type spherical

Series 230 CC/C3

Rows double

Design-spec ISO 15

Style LIGHT TYPE


Designation-skf-number 23030 CC/C3W33

Type-of-bore-mm 135

Diameter-od-mm 225

Width-height-mm 56


MODEL : 23030 C3

MFR : SKF

SPARE FOR AGITATOR AND GEAR BOX

LOCATION : BBU

Equivalent FAG Tag No : 23030E1A.M.C3_______________________________________________________________________01080 58.00.90.214.5 11 each

BRG ROLLER 22214EC3 30.09.2018

BRG ROLLER 22214EC3

Name ROLLER BEARING

Series Explorer SRB

Designation number 22214 EC3

Equivalent FAG Tag No.22214 E1A.M_______________________________________________________________________01090 58.00.90.215.7 3 each

BRG ROLLER 22215-EC3 75MM 130MM 30.09.2018

BRG ROLLER 22215-EC3 75MM 130MM

Bearings;Roller

Type spherical

Series Explorer SRB





Amount in Words_______________________________________________________________________Rows double

Style self-aligning

Mat-cage STEEL


Equivalent FAG Tag No.22215 E1.C3_______________________________________________________________________01100 58.00.90.218.7 5 each

BRG ROLLER 22218EC3 90MM 160MM 30.09.2018

BRG ROLLER 22218EC3 90MM 160MM

Bearings;Roller

Type spherical

Series Explorer SRB

Rows double

Style self-aligning

Mat-cage STEEL


Type-of-bore-mm 90

Diameter-od-mm 160

Width-height-mm 40

Equivalent FAG Tag No : 22218 E.M1.C3_______________________________________________________________________01110 58.00.90.418.7 4 each

BRG ROLLER 22218-EK 30.09.2018

BRG ROLLER 22218-EK

Bearings;Roller

Type spherical

Series Explorer SRB

Rows double

Style self-aligning

Mat-cage STEEL

Designation number 22218 EK

Width-height-mm 40

Equivalent FAG Tag No : 22218 E1AK.M_______________________________________________________________________01120 58.00.95.411.5 2 Piece

BRG ROLLR M 22211EKC3 50MM 100MM 30.09.2018

BRG ROLLR M 22211EKC3 50MM 100MM

Type spherical

Series 222 CCK/EK C3

Rows double

Design-spec ISO 113/1

Design-spec ISO 15

Style tapered w/adapter sleeve H311


Designation-skf-number 22211 EK C3

Type-of-bore-mm 50






Width-height-mm 25

Equivalent FAG Tag No : 22211E1K.C3_______________________________________________________________________01130 58.00.95.426.7 3 each

BRG ROLLER 22226EKC3 130MM 230MM 30.09.2018

BRG ROLLER 22226EKC3 130MM 230MM

Bearings;Roller

Type spherical

Series Explorer SRB

Rows double

Style tapered self-aligning

Mat-cage STEEL

Designation number 22226 EK C3

Type-of-bore-mm 130

Diameter-od-mm 230

Width-height-mm 64

Equivalent FAG Tag No.22226 SK.MB_______________________________________________________________________01140 58.00.97.715.5 2 Piece

BRG ROLLR MTR 22315E 75MM 160MM 30.09.2018

Type spherical

Series 223

Rows double

Design-spec ISO 15



Designation-skf-number 22315 E

Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 55

SKF 22315E SPHERICAL ROLLER BEARING FOR 132P203A/B._______________________________________________________________________01150 58.01.01.100.5 3 each

BRG BALL UK209+H2309 ID40MM OD85MM W50MM 30.09.2018

"BEARING BALL UK209 + H2309 WITH ADAPTER SLEEVE, LOCKING BEARING INSERT,"

TAPERED BORE

ID : 40MM

OD : 85MM

WIDTH : 50MM_______________________________________________________________________01160 58.01.01.508.5 6 Piece

BRG BALL MT 608J 8MM 22MM 30.09.2018

BRG BALL MT 608J 8MM 22MM

Type radial contact

Series 600






Design-spec DIN 625

Style extra small type deep groove


Designation-skf-number 608 J

Type-of-bore-mm 8

Diameter-od-mm 22

Width-height-mm 7

Equivalent FAG Tag No : 608-2Z_______________________________________________________________________01170 58.01.01.607.7 3 each

BRG BALL 627 2Z 7MM 22MM 30.09.2018


Type radial contact


Rows single

Design-spec DIN 625

Style deep groove with two shields


Designation number 627 2Z

Type-of-bore-mm 7

Diameter-od-mm 22

Width-height-mm 7

FOR SAMPLE PUMP OF STOCK ANALYZER AT DHDS_______________________________________________________________________01180 58.01.01.608.7 10 each

BRG BALL 608-2Z 8MM 22MM 30.09.2018

BRG BALL 608-2Z 8MM 22MM

Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 8

Diameter-od-mm 22

Width-height-mm 7

Equivalent FAG Tag No : 608-2Z_______________________________________________________________________01190 58.01.04.426.7 3 each

BRG BALL 16026 130MM 200MM 30.09.2018

Bearings;Ball

Type radial contact


Rows single





Amount in Words_______________________________________________________________________Style extra light type deep groove

Mat-cage STEEL

Designation number 16026

Type-of-bore-mm 130

Diameter-od-mm 200

Width-height-mm 22

FOR FIRE WATER PUMP YP-18P_______________________________________________________________________01200 58.01.04.600.5 2 Piece

BRG BALL MT 6000 10mm 26mm 30.09.2018

Type radial contact

Series 6000

Rows single

Design-spec DIN 625

Design-spec ISO 15



Designation-skf-number 6000

Type-of-bore-mm 10

Diameter-od-mm 26


BRG BALL 6003 17MM 35MM 30.09.2018

Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 17

Diameter-od-mm 35


BRG BALL 6004 20MM 42MM 30.09.2018

Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 20

Diameter-od-mm 42





Amount in Words_______________________________________________________________________Width-height-mm 12_______________________________________________________________________01230 58.01.04.606.5 8 Piece

BRG BALL MT 6006 30MM 55MM 30.09.2018

BRG BALL MT 6006 30MM 55MM

Type radial contact

Series 6000

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 55

Width-height-mm 13

Equivalent FAG Tag No : 6006_______________________________________________________________________01240 58.01.04.607.5 4 Piece

BRG BALL MT 6007 35MM 62MM 30.09.2018



Type radial contact

Series 6000

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 62

Width-height-mm 14


BRG BALL MT 6008 40MM 68MM 30.09.2018



Type radial contact

Series 6000

Rows single

Design-spec DIN 625

Design-spec ISO 15







Amount in Words_______________________________________________________________________Designation-skf-number 6008

Type-of-bore-mm 40

Diameter-od-mm 68

Width-height-mm 15

Equivalent FAG Tag No : 6008_______________________________________________________________________01260 58.01.04.609.7 3 each

BRG BALL 6009 45MM 75MM 30.09.2018

Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 45

Diameter-od-mm 75

Width-height-mm 16

BEARING 6009/ 6009_______________________________________________________________________01270 58.01.04.610.5 3 each

BRG BALL 6009 2Z 45MM 75MM 30.09.2018

Name BEARING BALL

Type RADIAL CONTACT

Series 6000

Rows SINGLE

Design-spec DIN 625

Design-spec ISO 15

Style DEEP GROVE

Mat-cage STEEL

Designation-skf-number 6009-2Z

Type-of-bore-mm 45

Diameter-od-mm 75


BRG BALL 6011 55MM 90MM 30.09.2018

Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 55

Diameter-od-mm 90





Amount in Words_______________________________________________________________________Width-height-mm 18_______________________________________________________________________01290 58.01.04.613.7 4 Piece

BRG BALL 6013 65MM 100MM 30.09.2018

Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 65

Diameter-od-mm 100


BRG BALL MT 6016 80MM 125MM 30.09.2018



Type radial contact

Series 6000

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 125

Width-height-mm 22


BRG BALL 6017 85MM 130MM 30.09.2018

BRG BALL 6017 85MM 130MM

Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 85

Diameter-od-mm 130

Width-height-mm 22

Equivalent FAG Tag No : 6017_______________________________________________________________________






BRG BALL 6003 Z 17MM 35MM 30.09.2018

BRG BALL 6003 Z 17MM 35MM

Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL

Designation number 6003-Z

Type-of-bore-mm 17

Diameter-od-mm 35

Width-height-mm 10

Equivalent FAG Tag No : 6003ZR_______________________________________________________________________01330 58.01.04.704.7 9 each

BRG BALL 6004 Z 20MM 42MM 30.09.2018

BRG BALL 6004 Z 20MM 42MM

Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 20

Diameter-od-mm 42

Width-height-mm 12


BRG BALL 60012Z 12MM 28MM 30.09.2018

BRG BALL 60012Z 12MM 28MM

Bearings;Ball

Type radial contact


Rows single

Style deep groove with both side shields

Mat-cage STEEL


Type-of-bore-mm 12

Diameter-od-mm 28

Width-height-mm 8

FOR SAMPLE PUMP OF STOCK ANALYZER AT DHDS

Equivalent FAG Tag No.6001 2ZR_______________________________________________________________________






BRG BALL MT 6004-2Z 20MM 42MM 30.09.2018

BRG BALL MT 6004-2Z 20MM 42MM

Type radial contact

Series 6000 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15



Designation-skf-number 6004 2Z

Type-of-bore-mm 20

Diameter-od-mm 42

Width-height-mm 12

Equivalent FAG Tag No : 6004.2ZR_______________________________________________________________________01360 58.01.04.917.7 4 each

BRG BALL 60172Z 85MM 130MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Style deep groove with tboth side shields

Mat-cage STEEL


Type-of-bore-mm 85

Diameter-od-mm 130

Width-height-mm 22

Equivalent FAG Tag No : 6017.2ZR_______________________________________________________________________01370 58.01.07.104.5 6 Piece

BRG BALL IM RLS4 1/2IN 1.5/16IN 30.09.2018

BEARINGS; BALL; IMPERIAL

Type radial contact

Series RLS

Rows single

Design-spec BS 292



Designation-rhp-number RLS 4

Type-of-bore-inch 1/2

Diameter-od-inch 1.5/16

Width-height-inch 3/8_______________________________________________________________________






BRG BALL IM RLS6 3/4IN 1.7/8IN 30.09.2018

BEARINGS; BALL; IMPERIAL

Type radial contact

Series RLS

Rows single

Design-spec BS 292






Width-height-inch 9/16_______________________________________________________________________01390 58.01.07.108.5 4 Piece

BRG BALL IM RLS8 1IN 2.1/4IN 30.09.2018

Bearing Ball

Type radial contact

Series RLS

Rows single

Design-spec BS 292




Type-of-bore-inch 1



BRG BALL IM RLS10 1.1/4IN 2.3/4IN 30.09.2018

Type radial contact

Series RLS

Rows single

Design-spec BS 292




Type-of-bore-inch 1.1/4



BRG BALL IM RLS11 1.3/8IN 3IN 30.09.2018

Type radial contact

Series RLS






Design-spec BS 292





Diameter-od-inch 3



Type radial contact

Series RLS

Rows single

Design-spec BS 292








Type radial contact

Series RLS

Rows single

Design-spec BS 292






Width-height-inch 3/4_______________________________________________________________________01440 58.01.07.209.7 25 each

BRG BALL 629 2Z 30.09.2018

Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL

Designation-rhp-number 629-2Z

Type-of-bore-inch 9

Diameter-od-inch 26_______________________________________________________________________






BRG BALL 6262Z 30.09.2018

Bearings;Ball

Type radial contact


Rows single

Style WITH BOTH SIDE SHIELD

Mat-cage STEEL

Designation-rhp-number 6262Z

Type-of-bore-inch 6

Diameter-od-inch 19

Width-height-inch 6_______________________________________________________________________01460 58.01.07.382.7 4 each

BRG BALL ADRR82Z 1/2IN 1-1/8IN 30.09.2018

Bearings;Ball

Type radial contact


Rows single

Style WITH BOTH SIDE SHIELD

Mat-cage STEEL

Designation-rhp-number 38 KDD (/FANFAIR)

Designation-rhp-number ADR R8 2Z



Width-height-inch 1/4

ADDTL. P. NO. 72VKUBPM7AB_______________________________________________________________________01470 58.01.07.518.5 4 each

BRG BALL 6219C3 95MM 170MM 32MM 30.09.2018

Name BEARING

Type BALL BEARING

Rows SINGLE

Style DEEP GROOVE

Mat-cage PRESSURED STEEL


Type-of-bore-mm 95

Diameter-od-mm 170


BRG BALL 6220 2Z 100MM 180MM 30.09.2018

BRG BALL 6220 2Z 100MM 180MM

Bearings;Ball

Type radial contact





Amount in Words_______________________________________________________________________Series Explorer DGBB

Rows SINGLE

Style BOTH SIDE METAL SHIELD

Mat-cage STEEL


Type-of-bore-mm 100

Diameter-od-mm 180

Width-height-mm 34


BRG BALL MT 6200 10MM 30MM 30.09.2018


Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 10

Diameter-od-mm 30

Width-height-mm 9


BRG BALL MT 6201 12MM 32MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 12

Diameter-od-mm 32

Width-height-mm 10


BRG BALL MT 6202 15MM 35MM 30.09.2018






Amount in Words_______________________________________________________________________BEARINGS; BALL; METRIC

Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 15

Diameter-od-mm 35

Width-height-mm 11


BRG BALL MT 6203 17MM 40MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 17

Diameter-od-mm 40

Width-height-mm 12


BRG BALL MT 6204 20MM 47MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 20

Diameter-od-mm 47

Width-height-mm 14





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : 6204_______________________________________________________________________01540 58.01.07.605.5 51 Piece

BRG BALL MT 6205 25MM 52MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 25

Diameter-od-mm 52

Width-height-mm 15


BRG BALL MT 6206 30MM 62MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16


BRG BALL MT 6207 35MM 72MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15








Type-of-bore-mm 35

Diameter-od-mm 72

Width-height-mm 17


BRG BALL 6208 40MM 80MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Style DEEP GROOVE

Mat-cage STEEL


Type-of-bore-mm 40

Diameter-od-mm 80

Width-height-mm 18


BRG BALL MT 6209 45MM 85MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 85

Width-height-mm 19


BRG BALL MT 6210 50MM 90MM 30.09.2018



Type radial contact

Series 6200

Rows single






Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 90

Width-height-mm 20


BRG BALL MT 6211 55MM 100MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 55

Diameter-od-mm 100

Width-height-mm 21


BRG BALL MT 6212 60MM 110MM 30.09.2018


Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22


BRG BALL MT 6213 65MM 120MM 30.09.2018






Amount in Words_______________________________________________________________________BEARINGS; BALL; METRIC

Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 23


BRG BALL MT 6214 70MM 125MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 70

Diameter-od-mm 125

Width-height-mm 24


BRG BALL MT 6215 75MM 130MM 30.09.2018


Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 130

Width-height-mm 25







BRG BALL MT 6216 80MM 140MM 30.09.2018



Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 140

Width-height-mm 26


BRG BALL MT 6217 85MM 150MM 30.09.2018


Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 85

Diameter-od-mm 150

Width-height-mm 28


BRG BALL 6219 95MM 170MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 95

Diameter-od-mm 170







BRG BALL MT 6220 100MM 180MM 30.09.2018


Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 100

Diameter-od-mm 180

Width-height-mm 34





Type radial contact

Series 6200

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 110

Diameter-od-mm 200

Width-height-mm 38


BRG BALL 6220 C3 180MM 100MM 30.09.2018

Name BALL BEARING


Designation number 6220C3

180MM 100MM_______________________________________________________________________01710 58.01.07.626.7 5 each

BRG BALL 6226 C3 130MM 230 30.09.2018

Bearings;Ball







Rows single

Style DEEP GROOVE

Mat-cage STEEL


Type-of-bore-mm 130

Diameter-od-mm 230

Width-height-mm 40

Equivalent FAG Tag No: 6226 C3

_______________________________________________________________________01720 58.01.07.702.5 4 Piece

BRG BALL MT 6202Z 15MM 35MM 30.09.2018

BRG BALL MT 6202Z 15MM 35MM

Type radial contact

Series 6200 Z

Rows single

Design-spec DIN 625

Design-spec ISO 15



Designation-skf-number 6202 Z

Type-of-bore-mm 15

Diameter-od-mm 35

Width-height-mm 11

Equivalent FAG Tag No : 6202ZR_______________________________________________________________________01730 58.01.07.704.5 5 Piece

BRG BALL MT 6204Z 20MM 47MM 30.09.2018



Type radial contact

Series 6200 Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 20

Diameter-od-mm 47

Width-height-mm 14

Equivalent FAG Tag No : 6204ZR_______________________________________________________________________






BRG BALL MT 6206Z 30MM 62MM 30.09.2018


Type radial contact

Series 6200 Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16


BRG BALL 6213Z 65MM 120MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Style with one side shield

Mat-cage STEEL

Designation number 6213 Z

Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 23


BRG BALL 6204-2Z 20MM 47MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 20

Diameter-od-mm 47

Width-height-mm 14

FOR DHDS MOTORS





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : 6204 2ZR_______________________________________________________________________01770 58.01.07.900.5 17 Piece

BRG BALL MT 6200-2Z 10MM 30MM 30.09.2018



Type radial contact

Series 6200 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 10

Diameter-od-mm 30

Width-height-mm 9


BRG BALL MT 6201-2Z 12MM 32MM 30.09.2018



Type radial contact

Series 6200 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 12

Diameter-od-mm 32

Width-height-mm 10

Equivalent FAG Tag No : 6201 2ZR_______________________________________________________________________01790 58.01.07.902.5 37 Piece

BRG BALL MT 6202-2Z 15MM 35MM 30.09.2018



Type radial contact

Series 6200 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15








Type-of-bore-mm 15

Diameter-od-mm 35

Width-height-mm 11


BRG BALL MT 6203-2Z 17MM 40MM 30.09.2018



Type radial contact

Series 6200 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 17

Diameter-od-mm 40

Width-height-mm 12


BRG BALL MT 6204-2Z 20MM 47MM 30.09.2018


Type radial contact

Series 6200 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 20

Diameter-od-mm 47

Width-height-mm 14

Equivalent FAG Tag No : 6204-C-2Z_______________________________________________________________________01820 58.01.07.905.5 77 Piece

BRG BALL MT 6205-2Z 25MM 52MM 30.09.2018


Type radial contact

Series 6200 2Z

Rows single






Design-spec ISO 15




Type-of-bore-mm 25

Diameter-od-mm 52

Width-height-mm 15

Equivalent FAG Tag No : 6205-C-2Z_______________________________________________________________________01830 58.01.07.906.7 31 each

BRG BALL 6206-2Z 30MM 62MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16


BRG BALL MT 6207-2Z 35MM 72MM 30.09.2018



Type radial contact

Series 6200 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 72

Width-height-mm 17


BRG BALL MT 6208-2Z 40MM 80MM 30.09.2018








Series 6200 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 40

Diameter-od-mm 80

Width-height-mm 18


BRG BALL MT 6209-2Z 45MM 85MM 30.09.2018



Type radial contact

Series 6200 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 85

Width-height-mm 19


BRG BALL 62122Z 60MM 110MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22

Equivalent FAG Tag No : 6212.2ZR_______________________________________________________________________






BRG BALL 6222 2Z 110MM 200MM 30.09.2018

BRG BALL 6222 2Z 110MM 200MM

Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 110

Diameter-od-mm 200

Width-height-mm 38


BRG BALL MT 6201-2RS1 12MM 32MM 30.09.2018

BRG BALL MT 6201-2RS1 12MM 32MM

Type radial contact

Series 6200 2RS1

Rows single

Design-spec DIN 625

Design-spec ISO 15

Style deep groove with two seals


Designation-skf-number 6201 2RS1

Type-of-bore-mm 12

Diameter-od-mm 32

Width-height-mm 10

Equivalent FAG Tag No : 6201.2RSR_______________________________________________________________________01900 58.01.08.406.5 11 Piece


BRG BALL MT 6206-2RS1 30MM 62MM

Type radial contact

Series 6200 2RS1

Rows single

Design-spec DIN 625

Design-spec ISO 15

Style deep groove with two seals


Designation-skf-number 6206 2RS1

Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : 6206.2RSR_______________________________________________________________________01910 58.01.08.412.7 29 each

BRG BALL 6212-2RS1 60MM 110MM 30.09.2018

BRG BALL 6212-2RS1 60MM 110MM

Bearings;Ball

Type radial contact


Rows single

Style with both side rubber seals

Mat-cage STEEL

Designation number 6212 2RS1

Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22


BRG BALL IM RMS6 3/4IN 2IN 30.09.2018

Type radial contact

Series RMS

Rows single

Design-spec BS 292



Designation-rhp-number RMS 6


Diameter-od-inch 2


BRG BALL IM RMS8 1IN 2.1/2IN 30.09.2018

Type radial contact

Series RMS

Rows single

Design-spec BS 292




Type-of-bore-inch 1



BRG BALL IM RMS9 1.1/8IN 2.13/16IN 30.09.2018

Bearings;Ball;Imperial






Series RMS

Rows single

Design-spec BS 292








Type radial contact

Series RMS

Rows single

Design-spec BS 292








Type radial contact

Series RMS

Rows single

Design-spec BS 292








Type radial contact

Series RMS

Rows single

Design-spec BS 292








Amount in Words_______________________________________________________________________Type-of-bore-inch 1.1/2




Type radial contact

Series RMS

Rows single

Design-spec BS 292






Width-height-inch 1.1/16_______________________________________________________________________01990 58.01.10.116.5 1 Piece

BRG BALL IM RMS16 2IN 4.1/2IN 30.09.2018

Type radial contact

Series RMS

Rows single

Design-spec BS 292




Type-of-bore-inch 2




Type radial contact

Series RMS

Rows single

Design-spec BS 292






Width-height-inch 1.1/4_______________________________________________________________________02010 58.01.10.601.7 4 each

BRG BALL 6301 12MM 37MM 30.09.2018







Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 12

Diameter-od-mm 37

Width-height-mm 12


BRG BALL 6302 15MM 42MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL


Type-of-bore-mm 15

Diameter-od-mm 42

Width-height-mm 13


BRG BALL SKF/EQ 6303 17MM 47MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type of bore MM 17

Diameter; od MM 47

Width/height MM 14_______________________________________________________________________02040 58.01.10.604.5 5 Piece

BRG BALL MT 6304 20MM 52MM 30.09.2018


Type radial contact





Amount in Words_______________________________________________________________________Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 20

Diameter-od-mm 52

Width-height-mm 15


BRG BALL MT 6305 25MM 62MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 25

Diameter-od-mm 62

Width-height-mm 17


BRG BALL MT 6306 30MM 72MM 30.09.2018



Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19







BRG BALL MT 6307 35MM 80MM 30.09.2018


Bearing; Ball;Metric

Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 21


BRG BALL MT 6308 40MM 90MM 30.09.2018



Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23


BRG BALL MT 6309 45MM 100MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15









Diameter-od-mm 100

Width-height-mm 25


BRG BALL MT 6310 50MM 110MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27


BRG BALL MT 6311 55MM 120MM 30.09.2018



Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29


BRG BALL MT 6312 60MM 130MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15








Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31


BRG BALL MT 6313 65MM 140MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33


BRG BALL MT 6314 70MM 150MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35


BRG BALL MT 6315 75MM 160MM 30.09.2018


Type radial contact

Series 6300

Rows single






Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37


BRG BALL MT 6316 80MM 170MM 30.09.2018



Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39


BRG BALL MT 6317 85MM 180MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41


BRG BALL MT 6318 90MM 190MM 30.09.2018






Amount in Words_______________________________________________________________________Bearings;Ball;Metric

Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 90

Diameter-od-mm 190

Width-height-mm 43


BRG BALL MT 6319 95MM 200MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 95

Diameter-od-mm 200

Width-height-mm 45


BRG BALL MT 6321 105MM 225MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 105

Diameter-od-mm 225

Width-height-mm 49







BRG BALL MT 6322 110MM 240MM 30.09.2018


Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 50


BRG BALL MT 6328M 140MM 300MM 30.09.2018

BRG BALL MT 6328M 140MM 300MM

Type radial contact

Series 6300

Rows single

Design-spec DIN 625

Design-spec ISO 15


Mat-cage BRASS

Designation-skf-number 6328 M

Type-of-bore-mm 140

Diameter-od-mm 300

Width-height-mm 62

Equivalent FAG Tag No : 6328M_______________________________________________________________________02230 58.01.10.629.5 2 Piece

BRG BALL 6213C3 65MM 120MM 30.09.2018

"Name ANTIFRICTION BEARINGS,BALL"

Type BALL BEARING

Series DEEP GROOVE

Rows SINGLE

Mat-cage STEEL

Designation-skf-number 6213C3

Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 23

LOCATION : CDU4_______________________________________________________________________






BRG BALL 6211C3 55MM 100MM 30.09.2018

"Name ANTIFRICTION BEARINGS,BALL"

Type BALL BEARING

Series DEEP GROOVE

Rows SINGLE

Mat-cage STEEL

Designation-skf-number 6211C3

Type-of-bore-mm 55

Diameter-od-mm 100


BRG BALL MT 6304Z 20MM 52MM 30.09.2018


Type radial contact

Series 6300 Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 20

Diameter-od-mm 52

Width-height-mm 15

Equivalent FAG Tag No : 6304ZR_______________________________________________________________________02260 58.01.10.706.5 30 Piece

BRG BALL MT 6306Z 30MM 72MM 30.09.2018



Type radial contact

Series 6300 Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19

Equivalent FAG Tag No : 6306ZR_______________________________________________________________________






BRG BALL 6307Z 35MM 80MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 21


BRG BALL 6307 NR 30.09.2018

Name BALL BEARING

Type radial contact


Rows single

Designation number 6307 NR

GROOVE WITH SNAP RING_______________________________________________________________________02290 58.01.10.711.7 27 each

BRG BALL 6311-Z 55MM 120MM 30.09.2018

BRG BALL 6311-Z 55MM 120MM

Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29


BRG BALL 6317Z 85MM 180MM 30.09.2018


Bearings;Ball

Type radial contact








Mat-cage STEEL


Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41


BRG BALL 6319Z 95MM 200MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 95

Diameter-od-mm 200

Width-height-mm 45


BRG BALL 6309 2ZNR 45MM 100MM 30.09.2018

BRG BALL 6309 2ZNR 45MM 100MM

Bearings;Ball

Type radial contact


Rows single

Style GROOVE WITH SNAP RING

Mat-cage STEEL

Designation number 6309 2ZNR

Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25

GROOVE:CYLINDER SUFACE OUT RING

Equivalent FAG Tag No : 6309.2ZR.NR_______________________________________________________________________02330 58.01.10.810.7 26 each

BRG BALL 6310 2ZNR 50MM 110MM 30.09.2018


Bearings;Ball

Type radial contact








Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27

Equivalent FAG Tag No : 6310.2ZR.NR_______________________________________________________________________02340 58.01.10.856.7 35 each

BRG BALL 6306 2ZNR 30MM 72MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19

Equivalent FAG Tag No : 6306.2ZR.NR_______________________________________________________________________02350 58.01.10.901.5 1 Piece

BRG BALL MT 6301-2Z 12MM 37MM 30.09.2018


Type radial contact

Series 6300 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 12

Diameter-od-mm 37

Width-height-mm 12


BRG BALL MT 6302-2Z 15MM 42MM 30.09.2018


Type radial contact

Series 6300 2Z

Rows single






Design-spec ISO 15




Type-of-bore-mm 15

Diameter-od-mm 42

Width-height-mm 13


BRG BALL MT 6303-2Z 17MM 47MM 30.09.2018



Type radial contact

Series 6300 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 17

Diameter-od-mm 47

Width-height-mm 14


BRG BALL MT 6304-2Z 20MM 52MM 30.09.2018



Type radial contact

Series 6300 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 20

Diameter-od-mm 52

Width-height-mm 15


BRG BALL MT 6305-2Z 25MM 62MM 30.09.2018





Amount in Words_______________________________________________________________________BRG BALL MT 6305-2Z 25MM 62MM


Type radial contact

Series 6300 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 25

Diameter-od-mm 62

Width-height-mm 17


BRG BALL MT 6306-2Z 30MM 72MM 30.09.2018


Type radial contact

Series 6300 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19


BRG BALL MT 6307-2Z 35MM 80MM 30.09.2018


Type radial contact

Series 6300 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 21

Equivalent FAG Tag No : 6307.2ZR_______________________________________________________________________






BRG BALL MT 6308-2Z 40MM 90MM 30.09.2018



Type radial contact

Series 6300 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23


BRG BALL MT 6309-2Z 45MM 100MM 30.09.2018



Type radial contact

Series 6300 2Z

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25


BEARING BALL MTR 6310 ZZ C3 50MM 110MM 30.09.2018

BEARING BALL MTR 6310 ZZ C3 50MM 110MM

Type RADIAL CONTACT

Series 6300 ZZ / 2Z

Rows SINGLE

Design-spec DIN 625 / ISO 15

Design-spec ISO 15

Style MEDIUM TYPE DEEP GROOVE


Designation-skf-number 6310 ZZ C3






Diameter-od-mm 110

Width-height-mm 27

TAG_NUMBER : NAPTHA FORWARDING PP MOTOR

EQUIPMENT_LOCATION : GT-3

PROJECT_NAME : CPP

BALL BEARING MTR 6310 ZZ C3

"TYPE-RADIAL CONTACTS,"

SERIES-6300 ZZ C3

ROW-SINGLE

DESIGN SPEC.-DIN 625 / ISO 15

STYLE-MEDIUM TYPE DEEP GROOVE

MAT. CAGE-PRESSED STEEL.

DESIG. SKF NUMBER-6310 ZZ C3


BRG BALL 6311-2Z 55MM 120MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29


BEARING BALL MTR 6312-ZZ 60MM 130MM 30.09.2018

BEARING BALL MTR 6312-ZZ 60MM 130MM

Type RADIAL CONTACTS

Series 6300 ZZ / 6300 2Z

Rows SINGLE

Design-spec DIN 625 / ISO 15

Design-spec ISO 15

Style MEDIUM TYPE DEEP GROOVE


Designation-skf-number 6312 ZZ

Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

TAG NUMBER : NAPTHA FORWARDING PP MOTOR





Amount in Words_______________________________________________________________________EQUIPMENT LOOCATION: GT-3

PROJECT NAME : CPP

BALL BEARING MTR 6312 ZZ

TYPE--RADIAL CONTACTS

SERIES--6300 ZZ.ROW-SINGLE.

DESIGN SPEC.--DIN625 / ISO 15.

STYLE-MEDIUM TYPE DEEP GROOVE.

MAT CAGE-PRESSED STEEL.

DESIGNATION SKF NUMBER-6312 ZZ


BRG BALL 6315-2Z 75MM 160MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL


Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37


BRG BALL 6409 30.09.2018

BRG BALL 6409

Bearings;Ball

Type - Bearing Ball 6409


Rows single

Style deep groove



BRG BALL 6306-2RS1 30MM 72MM 30.09.2018

BRG BALL 6306-2RS1 30MM 72MM

Bearings;Ball

Type radial contact


Rows single


Mat-cage STEEL





Amount in Words_______________________________________________________________________Designation number 6306-2RS1

Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19



Type radial contact

Rows single

Design-spec DIN 625

Design-spec ISO 15

Style medium type deep groove + seal


Designation-skf-number 6316-2RS1

Type-of-bore-mm 80MM

Diameter-od-mm 170MM

Width-height-mm 39

TAG NO : T-119 MIXER

LOCATION : TANK FARM_______________________________________________________________________02510 58.01.13.606.5 1 Piece

BRG BALL MT 6406 30MM 90MM 30.09.2018


Type radial contact

Series 6400

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 90

Width-height-mm 23


BRG BALL 6411 140MM 55MM 30.09.2018


Bearings;Ball

Type radial contact


Rows single

Style deep groove

Mat-cage STEEL





Amount in Words_______________________________________________________________________Designation number 6411

Type-of-bore-mm 140

Diameter-od-mm 55

Width-height-mm 33


BRG BALL MTR 6413 65MM 30.09.2018

BRG BALL MTR 6413 65MM

Type radial contact

Series 6400

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 65

Width-height-mm 35

SKF BEARING 6413

FOR PUMP

MAKE : M/S. SKF BEARINGS

MODEL : 10UP3M-17

SR. NO. : 10387007/008

TAG NO. : G45/G45S-PH5

LOCATION : PH5


BRG BALL MT 6415 75MM 190MM 30.09.2018


Type radial contact

Series 6400

Rows single

Design-spec DIN 625

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 190

Width-height-mm 45

Equivalent FAG Tag No : 6415M_______________________________________________________________________02550 58.01.27.202.7 10 each

BRG BALL 7202BECBJ 15MM 35MM 30.09.2018





Amount in Words_______________________________________________________________________BRG BALL 7202BECBJ 15MM 35MM


Type ANGULAR CONTACT

Series ACBB

Rows single

Mat-cage STEEL CAGE

Designation number 7202BECBJ

Type-of-bore-mm 15

Diameter-od-mm 35

Width-height-mm 11

Equivalent FAG Tag No : 7202B.JP.UA_______________________________________________________________________02560 58.01.27.203.7 4 each

BRG BALL 7203BECBM 17MM 40MM 30.09.2018

BRG BALL 7203BECBM 17MM 40MM

Bearings;Ball


Series ACBB

Rows single

Mat-cage BRASS

Designation number 7203BECBM

Type-of-bore-mm 17

Diameter-od-mm 40

Width-height-mm 12

Equivalent FAG Tag No : 7203 B.JP.UA_______________________________________________________________________02570 58.01.27.207.7 4 each



Bearings;Ball


Series ACBB

Rows single

Mat-cage BRASS


Type-of-bore-mm 35

Diameter-od-mm 72

Width-height-mm 17



BRG BALL 7210BECBJ 50MM 90MM

Bearings;Ball


Series ACBB






Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 90

Width-height-mm 20




Bearings;Ball


Series ACBB

Rows SINGLE

Mat-cage STEEL


Type-of-bore-mm 80

Diameter-od-mm 140

Width-height-mm 26




Bearings;Ball


Series ACBB

Rows single

Mat-cage STEEL


Type-of-bore-mm 90

Diameter-od-mm 160

Width-height-mm 30


BRG BALL NSK 7205BECBM 25MM 52MM 30.09.2018

BRG BALL NSK 7205BECBM 25MM 52MM

Bearings;Ball


Series ACBB

Rows single

Mat-cage BRASS


Type-of-bore-mm 25






Width-height-mm 15




Bearings;Ball

Type angular contact

Series ACBB

Rows single

Mat-cage BRASS


Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16




Bearings;Ball


Series ACBB

Rows single

Mat-cage STEEL


Type-of-bore-mm 55

Diameter-od-mm 100

Width-height-mm 21




Bearings;Ball


Series ACBB

Rows single

Mat-cage STEEL


Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22

BEARING 7310 B

Equivalent FAG Tag No : 7212B.JP.UA_______________________________________________________________________








Bearings;Ball


Series ACBB

Rows single

Mat-cage BRASS

Designation number 7220 BECBM

Type-of-bore-mm 100

Diameter-od-mm 180

Width-height-mm 34

Equivalent FAG Tag No : 7220B.MP.UA_______________________________________________________________________02660 58.01.27.406.5 8 Piece

BRG BALL MT 7206BECBP 30MM 62MM 30.09.2018

BRG BALL MT 7206BECBP 30MM 62MM

Type angular contact (33/45 DEG)

Series 7200 BECBP

Rows single

Design-spec ISO 15

Style light type paired mounting


Designation-skf-number 7206 BECBP

Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16

Equivalent FAG Tag No : 7206B.TVP.UA_______________________________________________________________________02670 58.01.27.408.5 13 set.





Series 7200 BECBP

Rows single

Design-spec ISO 15

Style light type paired mounting



Type-of-bore-mm 40

Diameter-od-mm 80

Width-height-mm 18

1 SET = 1 PC

Equivalent FAG Tag No : 7208 B.JP.UA_______________________________________________________________________





Amount in Words_______________________________________________________________________02680 58.01.27.420.7 22 set

BRG BALL 7220BECBM100MM 180MM 30.09.2018

Bearings;Ball


Series ACBB

Rows single

Style paired mounting

Mat-cage BRASS


Type-of-bore-mm 100

Diameter-od-mm 180

Width-height-mm 34

Equivalent FAG Tag No.7220 B.MP.UA_______________________________________________________________________02690 58.01.27.524.5 25 Piece

BRG BALL MTR 7224 BCBM/BM 120MM 215MM 30.09.2018

BRG BALL MTR 7224 BCBM/BM 120MM 215MM


Series 7200

Rows single

Design-spec DIN 628

Design-spec ISO 15

Style light type non-separable


Designation-skf-number 7224 BCBM / BM

Type-of-bore-mm 120

Diameter-od-mm 215

Width-height-mm 40

PN:4

EQUIPMENT : GEAR BOX

MFR : JOHNSON

MODEL : H 600

DW : TL 153-338-0

BEARING FOR DIESEL FIRE PUMP

MAKE : KBL

MODEL: BHR 42-30

Equivalent FAG Tag No : 7224B.MP.UA_______________________________________________________________________02700 58.01.27.606.7 3 set

BRG BALL 7206 BECBM 30MM 62MM 30.09.2018

Bearings;Ball


Series ACBB

Rows single






Amount in Words_______________________________________________________________________Mat-cage BRASS


Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16

Equivalent FAG Tag No.7206 B.JP.UA_______________________________________________________________________02710 58.01.27.613.7 5 set

BRG BALL 7213 BECBJ 65MM 120MM 30.09.2018

BRG BALL 7213 BECBJ 65MM 120MM

Bearings;Ball


Series ACBB

Rows single


Mat-cage STEEL

Designation number 7213 BECBJ

Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 23

Equivalent FAG Tag No : 7213B.JP.UA_______________________________________________________________________02720 58.01.27.704.5 8 Piece

BRG BALL MT 7204BEP 20MM 47MM 30.09.2018

BRG BALL MT 7204BEP 20MM 47MM



Series 7200 BEP

Rows single

Design-spec DIN 628

Design-spec ISO 15



Designation-skf-number 7204 BEP

Type-of-bore-mm 20

Diameter-od-mm 47

Width-height-mm 14

Equivalent FAG Tag No : 7204 B.JP_______________________________________________________________________02730 58.01.27.706.5 2 Piece




Series 7200 BEP

Rows single

Design-spec DIN 628





Amount in Words_______________________________________________________________________Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16

Equivalent FAG Tag No : 7206B.TVP_______________________________________________________________________02740 58.01.27.707.5 1 Piece




Series 7200 BEP

Rows single

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 72

Width-height-mm 17





Series 7200 BEP

Rows single

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 90

Width-height-mm 20


BRG BALL MT 7212 BEP 60MM 110MM 30.09.2018

BRG BALL MT 7212 BEP 60MM 110MM


Series 7200 BEP






Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22





Series 7200 BEP

Rows single

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 70

Diameter-od-mm 125

Width-height-mm 24


BRG BALL MT 7215-BECBJ 70 MM 125 MM 30.09.2018

BRG BALL MT 7215-BECBJ 70 MM 125 MM


Designation-skf-number 7215-BECBJ

Type-of-bore-mm 70 MM

Diameter-od-mm 125 MM

"SKF BEARING 7215 BECBJ,"

USED FOR PUMP 135P603-SOUR WATER

BLOW DOWN PUMP.

Equivalent FAG Tag No : 7215B.JP.UA_______________________________________________________________________02790 58.01.27.717.5 3 set.

BRG BALL 7216 BECBJ 30.09.2018


Series ACBB

Rows single

Mat-cage STEEL







Diameter-od-mm 140

Width-height-mm 26

Equivalent FAG Tag No.7216 B.JP.UA_______________________________________________________________________02800 58.01.27.828.5 4 each

BRG BALL 7228BCBM 30.09.2018


Series ACBB

Rows single

Mat-cage BRASS

Designation number 7228 BCBM

Type-of-bore-mm 140

Diameter-od-mm 250

Width-height-mm 42

Equivalent FAG Tag No.7228 B.MP.UA_______________________________________________________________________02810 58.01.27.830.7 6 each

BRG BALL 7230 BCBM 150MM 270MM 30.09.2018

BRG BALL 7230 BCBM 150MM 270MM

Bearings;Ball


Series Explorer ACBB

Rows single

Mat-cage BRASS


Type-of-bore-mm 150

Diameter-od-mm 270

Width-height-mm 45

Equivalent FAG Tag No : 7230B.MP.UA_______________________________________________________________________02820 58.01.30.107.7 20 each



Bearings;Ball


Series ACBB

Rows single

Mat-cage BRASS


Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 21

EQUIVALENT FAG TAG NO. 7307 B.JP.UA

_______________________________________________________________________







Bearings;Ball;


Series ACBB

Rows single

Mat-cage STEEL


Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29

Equivalent FAG Tag No.7311 B.JP.UA_______________________________________________________________________02840 58.01.30.112.7 78 each


Bearings;Ball


Series ACBB

Rows single

Mat-cage STEEL


Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No.7312 B.JP.UA_______________________________________________________________________02850 58.01.30.307.5 5 Piece

BRG BALL MTR 7307BECBM 35MM 80MM 30.09.2018

BRG BALL MTR 7307BECBM 35MM 80MM


Series 7300 BECBM

Rows single

Design-spec ISO 15

Style medium type paired mounting


Designation-skf-number 7307 BECBM

Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 21


BRG BALL MT 7308BECBJ 40MM 90MM 30.09.2018

BRG BALL MT 7308BECBJ 40MM 90MM






Amount in Words_______________________________________________________________________Series 7300 BECBJ

Rows single

Design-spec ISO 15



Designation-skf-number 7308 BECBJ

Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23





Series 7300 BECBJ

Rows single

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25





Series 7300 BECBJ

Rows single

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27





Series 7300 BECBJ






Design-spec ISO 15




Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29





Series 7300 BECBJ

Rows single

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31





Series 7300 BECBJ

Rows single

Design-spec ISO 15

Style medium type paired mountimg



Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33





Series 7300 BECBJ

Rows single









Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35





Series 7300 BECBJ

Rows single

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37




Bearings;Ball


Series ACBB

Rows single

Mat-cage STEEL


Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39


BRG BALL MTR 7317BECBJ 85MM 180MM 30.09.2018

BRG BALL MTR 7317BECBJ 85MM 180MM


Series 7300 BECBJ Rows

single

Design-spec ISO 15








Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41


BRG BALL MT 3218A 90MM 160MM 30.09.2018

Type ANGULAR CONTACT BALL BRG DOUBL

Series 32

Rows DOUBLE

Design-spec ISO 15

Style MEDIUM TYPE


Designation-skf-number 3218A

Type-of-bore-mm 90

Diameter-od-mm 160

Width-height-mm 52.4_______________________________________________________________________02970 58.01.30.322.7 3 set


Bearings;Ball


Series ACBB

Rows single

Mat-cage BRASS


Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 50

Equivalent FAG Tag No.7322 B.MP.UA_______________________________________________________________________02980 58.01.30.407.5 34 Piece





Series 7300 BECBP

Rows single

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 80






Equivalent FAG Tag No : 7307 B.JP.UA_______________________________________________________________________02990 58.01.30.408.5 33 Piece




Series 7300 BECBP

Rows single

Design-spec ISO 15




Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23

Equivalent FAG Tag No : 7308B.TVP.UA_______________________________________________________________________03000 58.01.30.409.5 42 Piece




Series 7300 BECBP

Rows single

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25


"BEARING,BALL,7311 BEC86P" 30.09.2018

"BEARING,BALL,7311 BEC86P"

BEARING 7311 BEC86P

SINGLE ROW ANGULAR CONTACT BALL BEARING

MFR. : SKF

PUMP TAG : 131P103A/B / 131P138A/B /

132P221A/B / 132P224A/B

LOCATION : RMP-CDU/VDU

Equivalent FAG Tag No : 7311B.TVP.UA_______________________________________________________________________03020 58.01.30.410.7 30 set








Series ACBB

Rows single

Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27





Series 7300 BECBP

Rows single

Design-spec ISO 15




Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29

Equivalent FAG Tag No : 7311B.TVP.UA_______________________________________________________________________03040 58.01.30.412.5 35 set.

BRG BALL MT 7312BECBP 60MM 130MM 2/SET 30.09.2018


Bearings Ball Metric

Type Angular contact (33/45 DEG)

Series 7300 BECBP

Rows single

Design-spec ISO 15


Mat-cage STEEL


Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No : 7312 B.JP.UA_______________________________________________________________________03050 58.01.30.413.5 26 set.








Amount in Words_______________________________________________________________________Series 7300 BECBP

Rows single

Design-spec ISO 15




Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33

Equivalent FAG Tag No : 7313B.TVP.UA_______________________________________________________________________03060 58.01.30.414.5 36 PAIR





Series 7300 BECBP

Rows single

Design-spec ISO 15




Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35






Series 7300 BECBP

Rows single

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37


"BEARING,BALL,7315 BEC86P" 30.09.2018

"BEARING,BALL,7315 BEC86P"





Amount in Words_______________________________________________________________________BEARING 7315 BEC86P

SINGLE ROW ANGULAR CONTACT BALL BEARING

MFR. : SKF

PUMP TAG : 131P108A/B / 131P109A/B / 131P113A/B /

131P132A/B / 131P133A/B / 131P134A/B/C /

132P216A/B / 132P217A/B / 132P219A/B /

132P220A/B / 132P231

LOCATION : RMP-CDU/VDU

Equivalent FAG Tag No : 7315B.TVP.UA_______________________________________________________________________03090 58.01.30.418.7 28 set



Bearings;Ball


Series ACBB

Rows single

Mat-cage STEEL


Type-of-bore-mm 90

Diameter-od-mm 190

Width-height-mm 43


BRG BALL MTR 7319BECBP 30.09.2018

BRG BALL MTR 7319BECBP

TYPE ANGULAR CONTACT (33/45 DEG)

SERIES 7300 BECBP

ROWS SINGLE

DESIGN-SPEC ISO 15

STYLE MEDIUM TYPE PAIRED MOUNTING

MAT-CAGE GLASS FIBRE REINF.POLYAMIDE6.6

DESIGNATION-SKF-NUMBER 7319 BECBP


BRG BALL MTR 7322BECBP 110MM 240MM 30.09.2018

BRG BALL MTR 7322BECBP 110MM 240MM



Series 7300 BECBP

Rows single

Design-spec ISO 15







Amount in Words_______________________________________________________________________Designation-skf-number 7322 BECBP

Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 50

PUMP DETAILS

MAKE : KIRLOSKAR EBARA

MODEL : 250X150 UCWM 70

TAG NUMBER : G-3 A/B/C PH-5

LOCATION : PUMP HOUSE - 5


BRG BALL MTR 7324BECBM 120MM 260MM 30.09.2018

BRG BALL MTR 7324BECBM 120MM 260MM

"Bearings,Ball,Metric"


Series 7300 BECBP

Rows single

Design-spec ISO 15


Mat-cage BRASS


Type-of-bore-mm 120

Diameter-od-mm 260

Width-height-mm 55

PUMP DETAILS

SBF BEARING 7324 BECBM

FOR KEPL CENTRIFUGAL PUMP.

PUMP MAKE : KEPL

MODEL : IUCWM 350-200-65

SR NO :

DRG NO : P8-C88-0006-2

LOCATION : PH-5

TAG NO : G2A/B


BRG BALL 7324 BCBM 30.09.2018

BRG BALL 7324 BCBM

Series ACBB

Reference-number 7324 BCBM


BRG BALL 7312BEGAM 60MM 130MM 30.09.2018

"Name BEARINGS,BALL"





Amount in Words_______________________________________________________________________Type BALL BEARING

Series ANGULAR CONTACT

Rows SINGLE

Style MEDIUM TYPE

Mat-cage BRASS

Designation-skf-number 7312BEGAM

Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

LOCATION : CDU4_______________________________________________________________________03150 58.01.30.428.5 2 each



Type BALL BEARING


Rows SINGLE

Style MEDIUM TYPE

Mat-cage BRASS

Designation-skf-number 7316BECBM

Type-of-bore-mm 80

Diameter-od-mm 170


BRG BALL 7320BEGAM 100MM 215MM 30.09.2018


Type BALL BEARING


Rows SINGLE

Style MEDIUM TYPE

Mat-cage BRASS

Designation-skf-number 7320BEGAM

Type-of-bore-mm 100

Diameter-od-mm 215

Width-height-mm 47

LOCATION : CDU4_______________________________________________________________________03170 58.01.30.430.5 2 each



Type BALL BEARING


Rows SINGLE

Style MEDIUM TYPE

Mat-cage BRASS





Amount in Words_______________________________________________________________________Designation-skf-number 7217BECBM

Type-of-bore-mm 85

Diameter-od-mm 150


BRG BALL MTR 7306 BEP 30MM 72MM 30.09.2018

BRG BALL MTR 7306 BEP 30MM 72MM


Series 7300

Rows single

Design-spec ISO 15

Style medium type non-separable



Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19

PN :320.02

Equivalent FAG Tag No : 7306B.TVP_______________________________________________________________________03190 58.01.30.514.7 60 set

BRG BALL SKF 7314BECBM 70MM 150MM 30.09.2018

BRG BALL SKF 7314BECBM 70MM 150MM



Series 7300 BECBM

Rows single

Design-spec ISO 15




Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35

BEARING BALL IN MATCHED PAIR SKF 7314 BECBM

BRASS CAGED


*CDLT*BRG BALL 7322BMPUA 110MM 240MM 30.09.2018

*CDLT*BRG BALL 7322BMPUA 110MM 240MM

Bearings;Ball


Series Explorer ACBB

Rows single






Style MEDIUM TYPE


Designation number 7322 BMP UA

Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 50


BRG BALL 7308 BECBJ 30.09.2018

BRG BALL 7308 BECBJ

Type ANGULAR CONTACT BALL BEARING

Series ACBB







Series 7300 BEP

Rows single

Design-spec ISO 15




Type-of-bore-mm 20

Diameter-od-mm 52

Width-height-mm 15






Series 7300 BEP

Rows single

Design-spec ISO 15




Type-of-bore-mm 25

Diameter-od-mm 62







BRG BALL MT 7306BECBJ30MM 72MM 30.09.2018

BRG BALL MT 7306BECBJ30MM 72MM



Series EXPLORER ACBB

Rows single

Design-spec ISO 15


Mat-cage STEEL CAGE


Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19






Series 7300 BEP

Rows single

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25






Series 7300 BEP

Rows single

Design-spec ISO 15









Diameter-od-mm 110

Width-height-mm 27





Series 7300 BEP

Rows single

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31






Series 7300 BEP

Rows single

Design-spec ISO 15




Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33





Series 7300 BEP

Rows single

Design-spec ISO 15









Diameter-od-mm 150

Width-height-mm 35





Series 7300 BEP

Rows single

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39





Series 7300 BEP

Rows single

Design-spec ISO 15




Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41






Series 7300 BEP

Rows single

Design-spec ISO 15









Diameter-od-mm 190

Width-height-mm 43


BRG BALL MTR 7320BECBP 100MM 215MM 30.09.2018

BRG BALL MTR 7320BECBP 100MM 215MM


Series 7300 BEP

Rows single

Design-spec ISO 15




Type-of-bore-mm 100

Diameter-od-mm 215

Width-height-mm 47

Equivalent FAG Tag No : 7320B.TVP.UA_______________________________________________________________________03340 58.01.30.880.7 4 each



Bearings;Ball


Series ACBB

Mat-cage BRASS


Type-of-bore-mm 150

Diameter-od-mm 320

Width-height-mm 65



BRG BALL 7305 BECBM 25MM 62MM

Bearings;Ball


Series ACBB

Mat-cage BRASS


Type-of-bore-mm 25

Diameter-od-mm 62

Width-height-mm 17

Equivalent FAG Tag No.7305 B.JP.UA_______________________________________________________________________





Amount in Words_______________________________________________________________________03360 58.01.30.908.7 34 set



Bearings;Ball


Series ACBB

Mat-cage STEEL


Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23

Equivalent FAG Tag No.7308 B.JP.UA_______________________________________________________________________03370 58.01.30.909.7 36 set


Bearings;Ball


Series ACBB

Mat-cage STEEL


Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25

Equivalent FAG Tag No.7309 B.JP.UA_______________________________________________________________________03380 58.01.30.910.5 35 set.

BRG THRUST 7309 BECBM 30.09.2018

BRG THRUST 7309 BECBM

Series ACBB




Bearings;Ball


Series ACBB

Mat-cage STEEL


Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29

MATCHED SET

EQUIVALENT FAG TAG NO. 7311 B.JP.UA

_______________________________________________________________________





Amount in Words_______________________________________________________________________03400 58.01.30.912.5 31 set.

BRG THRUST 7311BECBJ 30.09.2018

BRG THRUST 7311BECBJ

Material : BEARING THRUST; SET OF TWO NOS.

Series ACBB


Equivalent FAG Tag No : 7311B.JP.UA_______________________________________________________________________03410 58.01.30.913.7 29 set.



Bearings;Ball


Series ACBB

Mat-cage STEEL


Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33

MATCHED PAIR

Equivalent FAG Tag No : 7313B.JP.UA_______________________________________________________________________03420 58.01.30.915.7 26 set



Bearings;Ball


Series ACBB

Mat-cage STEEL


Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37

MATCHED PAIR

Equivalent FAG Tag No : 7315B.JP.UA_______________________________________________________________________03430 58.01.30.920.7 30 set



Bearings;Ball


Series ACBB

Mat-cage BRASS


Type-of-bore-mm 100






Width-height-mm 47


BRG BALL 7405BCBM 25MM 80MM 30.09.2018

BRG BALL 7405BCBM 25MM 80MM

Bearings;Ball


Series ACBB

Mat-cage BRASS

Designation number 7405BCBM

Type-of-bore-mm 25

Diameter-od-mm 80

Width-height-mm 21


BRG BALL 7410BCBM 50MM 130MM 30.09.2018

BRG BALL 7410BCBM 50MM 130MM

Bearings;Ball


Series ACBB

Mat-cage BRASS


Type-of-bore-mm 50

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No : 7310 B.MP.UA_______________________________________________________________________03460 58.01.33.410.5 1 Piece

BRG BALL MT 5410A 50mm 130mm 30.09.2018

Type angular contact (23 DEG.)

Series 5400

Rows double

Design-spec ISO 15



Designation-skf-number 5410 A

Type-of-bore-mm 50

Diameter-od-mm 130

Width-height-mm 58.70_______________________________________________________________________03470 58.01.33.509.5 1 Piece

BRG BALL MTR 7409 BCBM 45MM 120MM 30.09.2018

BRG BALL MTR 7409 BCBM 45MM 120MM





Amount in Words_______________________________________________________________________Type angular contact (33/45 DEG)

Series 7400 BJ

Rows single

Design-spec ISO 15

Style heavy type non-separable


Designation-skf-number 7409 BCBM

Type-of-bore-mm 45

Diameter-od-mm 120

Width-height-mm 29


BRG BALL MT 7408BM 40MM 110MM 30.09.2018

BRG BALL MT 7408BM 40MM 110MM


Series 7400 BM

Rows single

Design-spec ISO 15



Designation-skf-number 7408 BM

Type-of-bore-mm 40

Diameter-od-mm 110

Width-height-mm 27

Equivalent FAG Tag No : 7408B.MP_______________________________________________________________________03490 58.01.33.610.5 4 Piece

BRG BALL MT 7410BM 50MM 130MM 30.09.2018

BRG BALL MT 7410BM 50MM 130MM


Series 7400 BM

Rows single

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No : 7410B.MP_______________________________________________________________________03500 58.01.33.812.5 1 Piece

BRG BALL MTR 7412 BM 60MM 150MM 30.09.2018

BRG BALL MTR 7412 BM 60MM 150MM






Amount in Words_______________________________________________________________________Series 7400 BGM

Rows single

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 150

Width-height-mm 35

Equivalent FAG Tag No : 7412B.MP_______________________________________________________________________03510 58.01.33.907.7 7 set



Bearings;Ball


Series ACBB

Mat-cage BRASS


Type-of-bore-mm 35

Diameter-od-mm 100

Width-height-mm 25




Bearings;Ball


Series ACBB

Mat-cage BRASS


Type-of-bore-mm 40

Diameter-od-mm 110

Width-height-mm 27




Bearings;Ball


Series ACBB

Mat-cage BRASS


Type-of-bore-mm 45






Width-height-mm 29


BRG BALL QJ230N2MA BRASS CAGE ANG CONTCT 30.09.2018

Name BEARING BALL


Mat-cage BRASS

Designation Number QJ230N2MA

Equivalent FAG Tag No.QJ 320 N2M.PA_______________________________________________________________________03550 58.01.34.530.7 4 set

BRG BALL QJ230N2MA+NU230ECM150MM 270 30.09.2018

BRG BALL QJ230N2MA+NU230ECM150MM 270

Bearings;Ball

Type ANGULAR CONTACT+CYL.BRG.

Style FOUR POINT CONTACT

Mat-cage BRASS

Designation number QJ230N2MA/NU230ECM

Type-of-bore-mm 150

Diameter-od-mm 270

Width-height-mm 45

IN SET OF 1 NO EACH

Equivalent FAG Tag No : QJ 320 N2MPA+NU230 E.M1_______________________________________________________________________03560 58.01.34.611.5 4 Piece

BRG BALL MT QJ311 MA 55MM 120MM 30.09.2018

BRG BALL MT QJ311 MA 55MM 120MM



Series QJ

Rows single

Design-spec BS 292 LV



Designation-skf-number QJ311 MA

Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29

Equivalent FAG Tag No : QJ311MPA_______________________________________________________________________03570 58.01.34.612.5 1 Piece

BRG BALL MTR QJ311N2MPA/C3 55MM 120MM 30.09.2018

BRG BALL MTR QJ311N2MPA/C3 55MM 120MM






Amount in Words_______________________________________________________________________Type ANGULAR CONTACT

Series QJ

Rows single



Mat-cage METAL CAGE

Designation-skf-number QJ311N2MPA/C3

Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29

QJ311N2MPA/C3

FOUR POINT CONTACT BALL BRG.

MAKE : SKF BEARINGS

FOR DHDS 134P402A/B PUMP

Equivalent FAG Tag No : QJ311N2MPA.C3_______________________________________________________________________03580 58.01.34.614.7 4 set

BRG BALL QJ314MA 70MM 150MM 30.09.2018

BRG BALL QJ314MA 70MM 150MM

Bearings;Ball



Mat-cage BRASS

Designation number QJ314MA

Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35

Equivalent FAG Tag No : QJ314MPA_______________________________________________________________________03590 58.01.34.712.5 1 Piece

BRG BALL MTR QJ 312 N2MA/C2L 60MM 130MM 30.09.2018

BRG BALL MTR QJ 312 N2MA/C2L 60MM 130MM


Series QJ

Rows single




Designation-skf-number QJ312 N2MA / C2L

Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No : QJ312N2MPA.C2_______________________________________________________________________03600 58.01.34.812.7 4 each

BRG BALL QJ312MA/C3 60MM 130MM 30.09.2018





Amount in Words_______________________________________________________________________BRG BALL QJ312MA/C3 60MM 130MM


Mat-cage BRASS

Designation number QJ312 MA/C3

Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No : QJ312MPA.C3_______________________________________________________________________03610 58.01.34.813.5 4 Piece

BRG BALL MTR QJ312N2MAC2L 60MM 130MM 30.09.2018

BRG BALL MTR QJ312N2MAC2L 60MM 130MM



Series QJ

Rows single



Mat-cage METAL CAGE

Designation-skf-number QJ312N2MAC2L

Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

QJ312N2MAC2L


MAKE : SKF BEARINGS

"FOR 058P04A/B, 058P07A/B, 058P008"

Equivalent FAG Tag No : QJ312N2MPA.C2_______________________________________________________________________03620 58.01.34.816.5 4 Piece





Series QJ

Rows single



Mat-cage METAL CAGE


Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37

QJ315N2MPA/C3

FOUR POINT CONTACT BALL BEARING

MOC : METAL CAGE





Amount in Words_______________________________________________________________________MAKE : SKF BEARINGS

"EQUPT : 058P002A/B,058P03A/B"






Series QJ

Rows single



Mat-cage METAL CAGE


Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41

QJ317N2MPA/C3


MAKE : SKF BEARINGS

FOR 137P601A/B


BRG BALL 4 POINT CONTATCT QJ320N2MA SKF 30.09.2018

"BRG BALL,4 POINT CONTATCT QJ320N2MA,SKF"

Type QJ 3210 N2MA

Series QJ 3

Rows SINGLE

Design-spec AXIAL LOADS ACTING IN BOTH DIR


Mat-cage BRASS CAGE

Designation-skf-number QJ 320 N2MA

Type-of-bore-mm 100

Diameter-od-mm 215

Width-height-mm 47

NOTE : DESIGEND TO SUPPORT AXIAL LOADS ACTING IN BOTH DIRECTION.

TWO LOCATING SLOTS IN OUTER RING POSITION AT 180 DEG C TO EACH

"OTHER. MATERIAL CAGE STANDARD WITH MACHINED BRASS CAGE, OUTER"

RING CENTRED.

Equivalent FAG Tag No : QJ320N2MPA_______________________________________________________________________03650 58.02.10.108.7 1 each

BRG BALL 1308 ETN9 40MM 90MM 30.09.2018

BRG BALL 1308 ETN9 40MM 90MM






Type self aligning

Series SABB

Rows double

Mat-cage POLY AMIDE*

Designation number 1308 ETN9

Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23

Equivalent FAG Tag No : 1308 B.TVH_______________________________________________________________________03660 58.02.10.514.5 1 Piece

BRG BALL MTR 1314C3 30.09.2018

BRG BALL MTR 1314C3

Type self aligning

Series 1300 C3

Rows double

Design-spec DIN 630

Design-spec ISO 15

Style raceway of outer ring




BRG BALL MT 1304ETN-9 20MM 52MM 30.09.2018

BRG BALL MT 1304ETN-9 20MM 52MM

Type self aligning

Series 1300

Rows double

Design-spec DIN 630

Design-spec ISO 15

Style raceway of outer ring


Designation-skf-number 1304 ETN-9

Type-of-bore-mm 20

Diameter-od-mm 52

Width-height-mm 15

Equivalent FAG Tag No : 1304TV_______________________________________________________________________03680 58.02.19.206.7 6 each

BRG BALL 2206 ETN9 30MM 62MM 30.09.2018


Bearings;Ball

Type self aligning

Series SABB





Amount in Words_______________________________________________________________________Mat-cage STEEL


Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 20


BRG BALL 2207 ETN9 35MM 72MM 30.09.2018


Bearings;Ball

Type self aligning

Series SABB



Type-of-bore-mm 35

Diameter-od-mm 72

Width-height-mm 23

Equivalent FAG Tag No : 2207TV_______________________________________________________________________03700 58.02.19.501.5 5 Piece

BRG BALL MTR 2201 ETN9 12MM 32MM 30.09.2018

BRG BALL MTR 2201 ETN9 12MM 32MM


Type self aligning

Series 2200

Rows double

Design-spec DIN 630

Design-spec ISO 15

Style wide raceway of outer ring


Designation-skf-number 2201 ETN9

Type-of-bore-mm 12

Diameter-od-mm 32

Width-height-mm 14


BRG BALL 2208 ETN9 40MM80MM 30.09.2018

BRG BALL 2208 ETN9 40MM80MM

Bearings;Ball

Type self aligning

Series SABB



Type-of-bore-mm 40






Width-height-mm 23




Type self aligning

Series 2200

Rows double

Design-spec DIN 630

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 85

Width-height-mm 23




Type self aligning

Series 2200

Rows double

Design-spec DIN 630

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 130

Width-height-mm 31


BRG BALL MTR 2218C3 30.09.2018

BRG BALL MTR 2218C3

Type self aligning

Series 2200

Rows double

Design-spec DIN 630

Design-spec ISO 15







Amount in Words_______________________________________________________________________FOR HCP ID FAN (ROTHEMULE MAKE)

Equivalent FAG Tag No : 2218TV.C3_______________________________________________________________________03750 58.02.22.504.5 1 Piece

BRG BALL MTR 2304 30.09.2018

BRG BALL MTR 2304

Type self aligning

Series 2300

Rows double

Design-spec DIN 630

Design-spec ISO 15





BRG BALL MTR 2305 30.09.2018

BRG BALL MTR 2305

Type self aligning

Series 2300

Rows double

Design-spec DIN 630

Design-spec ISO 15







Type self aligning

Series 2300

Rows double

Design-spec DIN 630

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 36

Equivalent FAG Tag No : 2309TV_______________________________________________________________________









Type self aligning

Series 2300

Rows double



Type of bore mm 50

Diameter; od mm 110

Width/height mm 40


SKF RM22 2.75IN 6.25IN 30.09.2018

Type SELF ALIGNING IMPERIAL BALL BE

Series RM

Rows DOUBLE

Design-spec ISO 15

Style MEDIUM TYPE

Mat-cage STEEL

Designation-skf-number RM22

Type-of-bore-mm 2.75 IN

Diameter-od-mm 6.25 IN

Width-height-mm 1.375 IN_______________________________________________________________________03800 58.02.27.708.5 1 Piece

"BEARING,1308 EKTN9 + H 308,PATEL" 30.09.2018

"BEARING,1308 EKTN9 + H 308,PATEL"

1308 EKTN9 + H 308

SELF ALIGNING BALL BEARINGS

ON ADAPTOR SLEEVE

FOR CENTRIFUGAL BLOWER

MFR. : M/S. PATEL AIRTEMP INDIA LTD.

MODEL : PB-38

TAG NO. : 139K01A/B/C

SR. NO. : 11494

DW. NO. : C 5608

LOCATION : DM PLANT-RMP

Equivalent FAG Tag No : 1308K.TV.C3 + H308_______________________________________________________________________03810 58.02.27.709.5 1 Piece

BRG BALL MT 1209EKTN-9 45MM 85MM 30.09.2018

BRG BALL MT 1209EKTN-9 45MM 85MM





Amount in Words_______________________________________________________________________Type self aligning

Series 1200 K

Rows double

Design-spec ISO 15

Style without adapter sleeve


Designation-skf-number 1209 EKTN-9

Type-of-bore-mm 45

Diameter-od-mm 85

Width-height-mm 19

Equivalent FAG Tag No : 1209K.TV.C3_______________________________________________________________________03820 58.02.27.808.7 4 set

BRG BALL 1208EKTN9 + H208 30.09.2018

BRG BALL 1208EKTN9 + H208

Bearings;Ball

Type self aligning

Series SABB

Style W/ADAPTER SLEEVE H 208


Designation number 1208EKTN9+H208

Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 18

BEARING WITH ADAPTER SLEEVE LOCK NUT & WASHER

Equivalent FAG Tag No : 1208 K.TV.C3_______________________________________________________________________03830 58.02.30.709.5 1 Piece

BRG BALL MTR 1309 EKTN9 45MM 100MM 30.09.2018

BRG BALL MTR 1309 EKTN9 45MM 100MM

Type self aligning

Series 1300 K

Rows double

Design-spec ISO 15



Designation-skf-number 1309 EKTN9

Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25

Equivalent FAG Tag No : 1309K.TV.C3_______________________________________________________________________03840 58.02.30.713.7 1 each

BRG BALL 1313 ETN9 65MM 140MM 30.09.2018


Bearings;Ball





Amount in Words_______________________________________________________________________Type self aligning

Series SABB




Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33


BRG BALL 1217K + H217 30.09.2018

Name BALL BEARING

Manufacturer SKF/NSK

Reference-number 1217K + H217

Size 75MM SHAFT DIA AND OD 150MM

SELF ALIGNED DOUBLE ROW BALL BEARING WITH SLEEVE

Equivalent FAG Tag No.1217 K.TV.C3_______________________________________________________________________03860 58.02.40.065.5 4 each

BRG BALL 1310K+H310 30.09.2018

BEARING 1310K WITH ADAPTER SLEEVE H310_______________________________________________________________________03870 58.02.40.607.7 1 each

BRG BALL 2307EKTN9+H2307 30.09.2018

BRG BALL 2307EKTN9+H2307

Bearings;Ball

Type self aligning

Series SABB

Style w/adapter sleeve H 2307


Designation number 2307EK+H2307

Type-of-bore-mm 30

Diameter-od-mm 80

Width-height-mm 31

Equivalent FAG Tag No : 2307 K.TV.C3_______________________________________________________________________03880 58.02.50.304.7 4 each

BRG BALL 3204A 20MM 47MM 30.09.2018

BRG BALL 3204A 20MM 47MM

Bearings;Ball


Series Explorer DRACBB

Mat-cage STEEL

Designation number 3204 A

Type-of-bore-mm 20






Width-height-mm 20.6

Equivalent FAG Tag No : 3204 B.D.TVH_______________________________________________________________________03890 58.02.50.305.5 1 Piece

BRG BALL MT 3205AJ 25MM 52MM 30.09.2018

BRG BALL MT 3205AJ 25MM 52MM


Series 3200

Rows double

Design-spec DIN 628

Design-spec ISO 15

Style without filling slot


Designation-skf-number 3205 AJ

Type-of-bore-mm 25

Diameter-od-mm 52


Equivalent FAG Tag No : 3205B.TVH_______________________________________________________________________03900 58.02.50.308.7 1 each

BRG BALL 3208 A 40MM 80MM 30.09.2018

BRG BALL 3208 A 40MM 80MM

Bearings;Ball



Mat-cage STEEL


Type-of-bore-mm 40

Diameter-od-mm 80


Equivalent FAG Tag No : 3208 BD.TVH_______________________________________________________________________03910 58.02.50.312.5 3 Piece

BRG BALL MTR 3212 A 60MM 110MM 30.09.2018

BRG BALL MTR 3212 A 60MM 110MM



Series 3200

Rows double

Design-spec DIN 628

Design-spec ISO 15

Style light type with filling slot



Type-of-bore-mm 60







Equivalent FAG Tag No : 3212 B.D.TVH_______________________________________________________________________03920 58.02.50.313.7 3 each

BRG BALL 3213A 65MM 120MM 30.09.2018


Bearings;Ball



Rows double



Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 38


BRG BALL MTR 3214C3 30.09.2018

BRG BALL MTR 3214C3


Series 3200

Rows double




Equivalent FAG Tag No : 3214B.TVH.C3_______________________________________________________________________03940 58.02.50.317.5 1 Piece




Series 3200

Rows double

Design-spec DIN 628

Design-spec ISO 15



Designation-skf-number 3217A

Type-of-bore-mm 85

Diameter-od-mm 150








BRG BALL 3203 A 2ZTN9/MT33 17MM 40MM 30.09.2018

Bearings;Ball




Designation number 3203 A2ZTN9/MT33

Type-of-bore-mm 17

Diameter-od-mm 40


Equivalent FAG Tag No.3203 BD.2Z.TVH_______________________________________________________________________03960 58.02.50.409.5 2 Piece

BRG BALL MT 3209ATN-9 45MM 85MM 30.09.2018

BRG BALL MT 3209ATN-9 45MM 85MM


Series 3200

Rows double

Design-spec DIN 628

Design-spec ISO 15



Designation-skf-number 3209 ATN-9

Type-of-bore-mm 45

Diameter-od-mm 85



BRG BALL 3209 A 2Z/MT33 45MM 85MM 30.09.2018

BRG BALL 3209 A 2Z/MT33 45MM 85MM

Bearings;Ball



Mat-cage STEEL

Designation number 3209 A 2Z/MT33

Type-of-bore-mm 45

Diameter-od-mm 85


Equivalent FAG Tag No : 3209 BD.2Z.TVH_______________________________________________________________________03980 58.02.50.910.7 4 each

BRG BALL 3310 A 2RS1/C3MT33 30.09.2018

BRG BALL 3310 A 2RS1/C3MT33

Bearings;Ball





Amount in Words_______________________________________________________________________Type angular contact



Mat-cage STEEL

Designation number 3310 A 2RS1/C3 MT33

Type-of-bore-mm 50

Diameter-od-mm 110


Equivalent FAG Tag No : 3310BD.TVH_______________________________________________________________________03990 58.02.53.307.5 31 Piece

BRG BALL MTR 3307 ATN9 35MM 80MM 30.09.2018

BRG BALL MTR 3307 ATN9 35MM 80MM



Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15



Designation-skf-number 3307 ATN9

Type-of-bore-mm 35

Diameter-od-mm 80



BRG BALL MT 3309A 45MM 100MM 30.09.2018

BRG BALL MT 3309A 45MM 100MM



Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15

Style medium type with filling slot



Type-of-bore-mm 45

Diameter-od-mm 100



BRG BALL MT 3310A 50MM 110MM 30.09.2018





Amount in Words_______________________________________________________________________BRG BALL MT 3310A 50MM 110MM



Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 110



BRG BALL MT 3311A 55MM 120MM 30.09.2018




Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 55

Diameter-od-mm 120



BRG BALL MT 3312A 60MM 130MM 30.09.2018



Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 130






Amount in Words_______________________________________________________________________Equivalent FAG Tag No : 3312B.TVH_______________________________________________________________________04040 58.02.53.313.5 9 Piece

BRG BALL MT 3313A 65MM 140MM 30.09.2018




Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 65

Diameter-od-mm 140


Equivalent FAG Tag No : 3313B.TVH_______________________________________________________________________04050 58.02.53.318.5 1 Piece




Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 90

Diameter-od-mm 190






Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15









Diameter-od-mm 52







Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 25

Diameter-od-mm 62






Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 72



BRG BALL MTR 3306 C3 30MM 72MM 30.09.2018

BRG BALL MTR 3306 C3 30MM 72MM


Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15





Amount in Words_______________________________________________________________________Style without filling slot



Type-of-bore-mm 30

Diameter-od-mm 72


Equivalent FAG Tag No : 3306B.TVH.C3_______________________________________________________________________04100 58.02.53.408.5 15 Piece





Series 3300

Rows double

Design-spec DIN 628

Design-spec ISO 15




Type-of-bore-mm 40

Diameter-od-mm 90



BRG BALL MTR 3308A 40MM 90MM 30.09.2018

BRG BALL MTR 3308A 40MM 90MM



Series 3300

Rows double

Design-spec DIN 628


Mat-cage METAL CAGE


Type-of-bore-mm 40

Diameter-od-mm 90



BRG BALL 3305A 25MM 62MM 30.09.2018


Bearings;Ball






Amount in Words_______________________________________________________________________Series Explorer DRACBB

Mat-cage STEEL

Designation number 3305A

Type-of-bore-mm 25

Diameter-od-mm 62


Equivalent FAG Tag No : 3305 BD.TVH_______________________________________________________________________04130 58.02.53.506.7 26 each

BRG BALL 3306 A 30MM 72MM 30.09.2018



Bearings;Ball



Mat-cage STEEL


Type-of-bore-mm 30

Diameter-od-mm 72


Equivalent FAG Tag No : 3306 BD.TVH_______________________________________________________________________04140 58.02.53.507.5 26 each

BRG BALL 3306 A 2Z/C3 MT33 30.09.2018

BRG BALL 3306 A 2Z/C3 MT33

Bearings;Ball



Mat-cage STEEL

Designation number 3306 A 2Z/C3 MT33

Equivalent FAG Tag No : 3306 BD.TVH.C3_______________________________________________________________________04150 58.02.53.510.5 4 each

BRG BALL MT 3311A 2RS 55MM 120MM 30.09.2018

Name BEARING BALL METRIC


Series 3300

Rows DOUBLE

"Design-spec DIN 628, ISO 15"

Style MEDIUM TYPE WITH FILLING SLOT


Designation-skf-number 3311A 2RS

Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 49.2_______________________________________________________________________






BRG BALL 3315 A 75MM 160MM 30.09.2018


Bearings;Ball



Mat-cage STEEL


Type-of-bore-mm 75

Diameter-od-mm 160

Width/height-mm 68.3


BRG BALL 3310 AC3 50MM 110MM 30.09.2018

BRG BALL 3310 AC3 50MM 110MM

Bearings;Ball



Mat-cage STEEL

Designation number 3310 A C3

Type-of-bore-mm 50

Diameter-od-mm 110


Equivalent FAG Tag No : 3310 BD.TVH.C3_______________________________________________________________________04180 58.02.65.120.5 1 Piece




Series 5200

Rows double

Design-spec ISO 15




Type-of-bore-mm 100

Diameter-od-mm 180


PN:37

EQUIPMENT : GEAR BOX

MFR : JOHNSON

MODEL : H 600

FOR KIRLOSKAR PUMP

MODEL : BHR





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : 3220_______________________________________________________________________04190 58.02.65.215.7 4 each

BRG BALL 3215 A 2Z/C3MT33 30.09.2018

BRG BALL 3215 A 2Z/C3MT33

Bearings;Ball




Mat-cage STEEL

Designation number 3215 A 2Z/C3MT33

Type-of-bore-mm 75

Diameter-od-mm 130

Width-height-mm 41

Equivalent FAG Tag No : 3215B.2ZR.TVH.C3_______________________________________________________________________04200 58.02.65.406.7 1 each

BRG BALL 4206 ATN9 30MM 62MM 30.09.2018

BRG BALL 4206 ATN9 30MM 62MM

Type radial contact


Rows double

Design-spec 4206 ATN-9


Designation number 4206 ATN9

Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 20

Equivalent FAG Tag No : 4206 B.BTVH_______________________________________________________________________04210 58.02.67.113.7 4 each

BRG BALL 3313A 2Z/C3MT33 30.09.2018

BRG BALL 3313A 2Z/C3MT33

Bearings;Ball




Mat-cage STEEL

Designation number 3313A 2Z/C3MT33

Type-of-bore-mm 65

Diameter-od-mm 140


Equivalent FAG Tag No : 3313B.2ZR.TVH.C3_______________________________________________________________________04220 58.02.67.211.5 3 Piece

BRG BALL MT 3311 ANRH 55mm 120mm 30.09.2018





Amount in Words_______________________________________________________________________Type angular contact (23 DEG.)

Series 5300

Rows double

Design-spec ISO 15

Style filling slot with snap ring


Designation-skf-number 3311 ANRH

Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 49.2_______________________________________________________________________04230 58.02.67.408.7 6 each

BRG BALL 3308 A 40MM 90MM 30.09.2018


Bearings;Ball


Series DRACBB

Rows double

Mat-cage STEEL


Type-of-bore-mm 40

Diameter-od-mm 90





Type radial contact

Series 4300

Rows double

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 36




Type radial contact

Series 4300

Rows double









Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 43


BRG BALL 51110 30.09.2018

BRG BALL 51110

Bearings;Ball

Type Thrust Ball Bearing

Rows single

Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 70

Width-height-mm 14

GROVEED RACE


BRG BALL 51100 10MM 24MM 30.09.2018


Bearings;Ball


Series TBB

Rows SINGLE

Mat-cage STEEL


Type-of-bore-mm 10

Diameter-od-mm 24

Width-height-mm 9


BRG BALL 51102 15MM 28MM 30.09.2018


Bearings;Ball


Series TBB

Mat-cage STEEL


Type-of-bore-mm 15






Width-height-mm 9


BRG BALL 51104 20MM 35MM 30.09.2018


Bearings;Ball


Series TBB

Mat-cage STEEL


Type-of-bore-mm 20

Diameter-od-mm 35

Width-height-mm 10


BRG BALL 51105 25MM 42MM 11MM 30.09.2018


Series TBB

Mat-cage STEEL


Type-of-bore-mm 25

Diameter-od-mm 42


BRG BALL 51106 30MM 47MM 30.09.2018


Bearings;Ball


Series TBB



Type-of-bore-mm 30

Diameter-od-mm 47

Width-height-mm 11


BRG BALL MT 51107 35MM 52MM 30.09.2018


Type thrust

Series 51100

Rows single






Design-spec ISO 104

Style extra light type flat seats



Type-of-bore-mm 35

Diameter-od-mm 52

Width-height-mm 12


BRG BALL MT 51108 40MM 60MM 30.09.2018


Type thrust

Series 51100

Rows single

Design-spec DIN 711

Design-spec ISO 104

Style extra light type flat seats



Type-of-bore-mm 40

Diameter-od-mm 60

Width-height-mm 13


BRG BALL 51210 50MM 78MM 30.09.2018


Bearings;Ball


Series TBB

Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 78

Width-height-mm 22


BRG BALL MT 51206 30MM 52MM 30.09.2018


Type thrust

Series 51200

Rows single

Design-spec DIN 711






Style light type flat seats



Type-of-bore-mm 30

Diameter-od-mm 52

Width-height-mm 16


BRG BALL 51310 50MM 95MM 30.09.2018


Bearings;Ball


Series TBB

Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 95

Width-height-mm 31


BRG BALL YAR 216-2F 30.09.2018

BRG BALL YAR 216-2F

Bearing; Ball

Type Y BEARINGS

Rows single

Designation number YAR 216-2F

Equivalent FAG Tag No : GYE80-KRR-B_______________________________________________________________________04380 58.03.27.926.5 2 Piece

BRG BALL MT 53226 130MM 195MM 30.09.2018


Type thrust

Series 53200

Rows single

Design-spec DIN 711

Style seating washer U 226



Type-of-bore-mm 130

Diameter-od-mm 195

Width-height-mm 53







BRG BALL MT 52213 55MM 100MM 30.09.2018


Type thrust

Series 52200

Rows double

Design-spec DIN 715

Design-spec ISO 104

Style small bore centre washer



Type-of-bore-mm 55

Diameter-od-mm 100

Width-height-mm 47


BEARING NU 210 ECJK TAPER BORE 30.09.2018

BEARING NU 210 ECJK TAPER BORE


BEARING SKF NU 210 ECKP/C3 30.09.2018

BEARING SKF NU 210 ECKP/C3


BRG.,BALL,FRIATEC,PN:RH26802 DIN 711 30.09.2018

"THRUST BALL BEARING + U214, 53214"

SEATING FOR THRUST BALL BEARING 53214

PN : RH26802 DIN 711

FOR VERTICAL SUMP PUMP

MFR. : M/S. FRIATEC-RHEINHUTTE GMBH & CO

MODEL : GVSN 80/315 II AH

SR. NO. : 144068-71

TAG : 134P411A/B & 134P511A/B

DW NO. : SZ501320

LOCATION : SRU-RMP_______________________________________________________________________04430 58.05.10.067.5 21 Piece

"BEARING 6310-2RS, SKF MAKE" 30.09.2018

"BEARING 6310-2RS, SKF MAKE"

BEARING

SIZE : 6310-2RS

"MFR. : NGEF, BB"





Amount in Words_______________________________________________________________________FOR MOTOR FOR PUMP

TAG : 131-PM-120A/B / 131-PM-121A/B

LOCATION : CDU/VDU-RMP


"BEARING,6312RS,CGL" 30.09.2018

"BEARING,6312RS,CGL"

BEARING

SIZE : 6312RS

MFR. : CGL

FOR MOTOR FOR PUMP

TAG : 131-PM-103A/B


Equivalent FAG Tag No : 6312RSR_______________________________________________________________________04450 58.05.10.069.5 1 Piece

"BEARING 6226, SKF MAKE" 30.09.2018

"BEARING 6226, SKF MAKE"

BEARING

SIZE : 6226

MFR. : NGEF

FOR MOTOR FOR PUMP

TAG : 131-PM-107A/B



"BEARING 6204ZZC3, SKF MAKE" 30.09.2018

"BEARING 6204ZZC3, SKF MAKE"

BEARING

SIZE : 6204ZZC3

MFR. : BB

FOR MOTOR FOR DOSING PUMP

TAG : 31-XM-103A/103B/104-1A/104-1B/104-2/

105-1A/105-1B/105-1C/105-1D/105-2A

128A/B / 132A/B



"BEARING,BALL,6216 C3" 30.09.2018

"BEARING,BALL,6216 C3"

BALL BEARING

SIZE : 6216 C3

MFR. : BHEL





Amount in Words_______________________________________________________________________FOR PUMP MOTOR

TAG : 132-PM-202 A/B

LOCATION : HCU-RMP


"BEARING,BALL,6218 C3" 30.09.2018

"BEARING,BALL,6218 C3"

BALL BEARING

SIZE : 6218 C3

MFR. : BHEL

FOR PUMP MOTOR

TAG : 132-PM-202 A/B

LOCATION : HCU-RMP


"BEARING,6224 C3,SKF" 30.09.2018

"BEARING,6224 C3,SKF"

BEARING

SIZE : 6224 C3

MFR. : SKF

LOCATION : HGU-RMP


"BEARING,6314P63,NGEF" 30.09.2018

"BEARING,6314P63,NGEF"

BEARING

SIZE : 6314P63

MFR. : NGEF

FOR MOTOR FOR PUMP

TAG : 131-PM-112A/B


Equivalent FAG Tag No : 6314.P63_______________________________________________________________________04510 58.05.10.075.5 21 Piece

"BEARING 6312-2RS, SKF MAKE" 30.09.2018

"BEARING 6312-2RS, SKF MAKE"

BEARING

SIZE : 6312-2RS

MFR. : CGL

FOR MOTOR FOR AFC

TAG : 131-EM-102A/B/C/D/E/F


Equivalent FAG Tag No : 6312.2RSR_______________________________________________________________________






"BEARING,6313-2RS,CGL" 30.09.2018

"BEARING,6313-2RS,CGL"

BEARING

SIZE : 6313-2RS

MFR. : CGL

FOR MOTOR FOR AFC

TAG : 131-EM-101A/B/C/D/E/F/G/H



"BEARING,6220C3" 30.09.2018

"BEARING,6220C3"

BEARING

SIZE : 6220C3

FOR MOTOR FOR PUMP

MAKE : BHEL

TAG : 131-PM-101A/B / 131-PM-133A/B



"BEARING,6205ZZC3" 30.09.2018

"BEARING,6205ZZC3"

BEARING

SIZE : 6205ZZC3

FOR MOTOR FOR DOSING PUMP

TAG : 131-XM-103/133/133A/104/105



"BEARING,6219C3" 30.09.2018

"BEARING,6219C3"

BEARING

SIZE : 6219C3

FOR MOTOR FOR PUMP

MAKE : BHEL

TAG : 131-PM-132A/B / 131-PM-134A/B/C



"BEARING,BALL,6232 C3,SKF" 30.09.2018





Amount in Words_______________________________________________________________________"BEARING,BALL,6232 C3,SKF"

"BALL BEARING, SKF, DE SIDE"

SIZE : 6232 C3

FOR MOTOR FOR PUMP

MAKE : BHEL

TAG : 133-KM-304A/B

LOCATION : HGU-RMP


"BEARING,BALL,6238 C3,SKF" 30.09.2018

"BEARING,BALL,6238 C3,SKF"


SIZE : 6238 C3

FOR MOTOR FOR COMPRESSOR

MAKE : BHEL

TAG : 132-KM 202 A/B

LOCATION : HCU-RMP


"BEARING,BALL,6217 C,SKF" 30.09.2018

"BEARING,BALL,6217 C,SKF"


SIZE : 6217 C

FOR MOTOR FOR PUMP

MAKE : BHEL

TAG : 133-PM-302A

LOCATION : HGU-RMP


"BEARING,BALL,6219/C3" 30.09.2018

"BEARING,BALL,6219/C3"

"BALL BEARING, SKF"

SIZE : 6219/C3

FOR MOTOR FOR PUMP

"HP-640,RPM-2979,VOLTS-6600, AMPS-49,FRAME-1MA7566-2"

MAKE : BHEL

TAG : 131PM134B

SR. NO. : 42027A-411-51-02



BRG BALL 51209 45MM 73MM 20MM 30.09.2018





Amount in Words_______________________________________________________________________BRG BALL 51209 45MM 73MM 20MM

Bearings;Ball


Series TBB


Type-of-bore-mm 45

Diameter-od-mm 73

Width-height-mm 20


THRUST BALL BEARING DESIGNATION NO 51211 30.09.2018

THRUST BALL BEARING DESIGNATION NO 51211

BALL BEARINGS

TYPE : THRUST BALL BEARING

DESIGNATION NUMBER : 51211

FOR PLUG VALVE

LOCATION : MMBPL


BRG 30211 J2/Q 30.09.2018

BRG 30211 J2/Q

Type Taper Roller Bearing

Series TBB

Designation number 30211 J2/Q

Equivalent FAG Tag No : 30211A_______________________________________________________________________04630 58.05.10.510.5 4 each

BRG BALL 51103 30.09.2018

BRG BALL 51103


Series 51103


BRG THRUST 51114 30.09.2018

Name BEARING THRUST

NO.51114_______________________________________________________________________04650 58.05.10.524.5 3 each

BRG BALL 51124 30.09.2018


Series 51124

ID - 120MM

OD - 155MM





Amount in Words_______________________________________________________________________THK - 25MM_______________________________________________________________________04660 58.05.10.530.5 9 each

BRG THR NEEDLE OD90 ID65 W5 AXK6590 30.09.2018

Name BEARING THRUST NEEDLE

Reference-number AXK6590

"Size OD:90MM, ID:65MM, WIDTH:5MM"_______________________________________________________________________04670 58.06.04.404.7 5 each

BRG ROLLER NU2204ECP 20MM 47MM 30.09.2018

BRG ROLLER NU2204ECP 20MM 47MM

Bearings;Roller

Type Cylindrical Roller Bearing

Series Explorer CRB

Mat-cage POLYAMIDE*

Designation number NU2204 ECP

Type-of-bore-mm 20

Diameter-od-mm 47

Width-height-mm 18

Equivalent FAG Tag No : NU2204E.TVP2_______________________________________________________________________04680 58.06.04.426.7 4 each

BRG ROLLER NU1026ML 130MM 200 MM 30.09.2018

BRG ROLLER NU1026ML 130MM 200 MM

Bearings;Roller


Series Explorer CRB

Mat-cage BRASS

Designation number NU1026ML

Type-of-bore-mm 130

Diameter-od-mm 200

Width-height-mm 33

Equivalent FAG Tag No : NU1026M1_______________________________________________________________________04690 58.06.07.140.5 1 Piece

BRG ROLLR IMP CRL 40 AMB 9IN 30.09.2018

Type cylindrical

Series LRJ

Rows single

Design-spec BS 292



Designation-rhp-number CRL 40 AMB

Type-of-bore-inch 5

Diameter-od-inch 9

Width-height-inch 1.3/8_______________________________________________________________________






BRG ROLLER N211ECM 55MM 100MM 30.09.2018

BRG ROLLER N211ECM 55MM 100MM

Bearings;Roller

Type cylindrical

Series Explorer CRB

Mat-cage BRASS

Designation number N211ECM

Type-of-bore-mm 55

Diameter-od-mm 100

Width-height-mm 21

Equivalent FAG Tag No : N211E.M1_______________________________________________________________________04710 58.06.08.121.5 1 Piece

BRG ROLLR MTR N 221 ECP 105MM 190MM 30.09.2018

BRG ROLLR MTR N 221 ECP 105MM 190MM

Type cylindrical

Series N 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 105

Diameter-od-mm 190

Width-height-mm 36


BRG ROLLR M N205ECP 25MM 52MM 30.09.2018

BRG ROLLR M N205ECP 25MM 52MM

Type cylindrical

Series N 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 25

Diameter-od-mm 52

Width-height-mm 15







Amount in Words_______________________________________________________________________BRG ROLLR M N206ECP 30MM 62MM

Type cylindrical

Series N 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16


BRG ROLLR MTR NU210ECJ 30.09.2018

BRG ROLLR MTR NU210ECJ

Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15




FOR 111-P-10 A/B

Equivalent FAG Tag No : NU210E.M1_______________________________________________________________________04750 58.06.08.312.5 5 Piece

HJ 212 FOR SKF NU 212EC 30.09.2018

HJ 212 FOR SKF NU 212EC

HJ 212 FOR SKF NU 212EC

FOR AIR FIN COOLERS

MFR. : M/S. GEA HAMMON SYSTEMS

TAG : 132EF202A/B / 132EF206A/B/C / 132EF212A/B

LOCATION : RMP-SRU & HYDROCRACKER


BEARING N312 ECP/C3 30.09.2018

BEARING N312 ECP/C3

BEARING N312 ECP/C3

LOCATION: MAINTENANCE ELECTRICAL.

Equivalent FAG Tag No : N312E.TVP2.C3_______________________________________________________________________04770 58.06.08.313.5 1 Piece

HJ 216 FOR SKF NU 216 EC 30.09.2018

HJ 216 FOR SKF NU 216 EC





Amount in Words_______________________________________________________________________HJ 216 FOR SKF NU 216 EC

FOR AIR FIN COOLERS



Equivalent FAG Tag No : HJ216_______________________________________________________________________04780 58.06.08.314.5 1 Piece

HJ 218 FOR SKF NU 218 EC 30.09.2018



FOR AIR FIN COOLERS



Equivalent FAG Tag No : HJ218_______________________________________________________________________04790 58.06.08.315.5 1 Piece



Type cylindrical

Series N 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 130

Width-height-mm 25

Equivalent FAG Tag No : N215E.TVP2_______________________________________________________________________04800 58.06.08.317.7 10 each

BRG ROLLER NU217 ECJ 85MM 150MM 30.09.2018

BRG ROLLER NU217 ECJ 85MM 150MM

Bearings;Roller


Series Explorer CRB

Mat-cage STEEL

Designation number NU217 ECJ

Type-of-bore-mm 85

Diameter-od-mm 150

Width-height-mm 28

Equivalent FAG Tag No : NU217E.M1_______________________________________________________________________04810 58.06.08.404.5 3 each

BRG ROLLER NU205ECJ 25MM 52MM 30.09.2018

Name Cylindrical Roller Bearing





Amount in Words_______________________________________________________________________Series Explorer CRB

Mat-cage Steel

Designation-skf-number NU205ECJ

Type-of-bore-mm 25

Diameter-od-mm 52



BRG ROLLER NU211ECJ 55MM 100MM


Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 55

Diameter-od-mm 100

Width-height-mm 21

Equivalent FAG Tag No.NU 211 E.M1_______________________________________________________________________04830 58.06.08.411.7 3 each

BRG ROLLER NU211ECJ + HJ211EC 55MM 100MM 30.09.2018

Bearings;Roller

Type Cylindrical Roller Bearing + Angle Ring

Series Explorer CRB

Mat-cage STEEL

Designation number NU211ECJ + HJ211EC

Type-of-bore-mm 55

Diameter-od-mm 100


BRG ROLLER NU219ECJC3 95MM 170MM 32MM 30.09.2018

Name BEARING

Type CYLINDRICAL ROLLER

Series EXPLORER CRB

Mat-cage STEEL

Designation-skf-number NU219ECJ C3

Type-of-bore-mm 95

Diameter-od-mm 170


BRG ROLLER NU219ECJ 95MM 170M 30.09.2018

BRG ROLLER NU219ECJ 95MM 170M


Series Explorer CRB





Amount in Words_______________________________________________________________________Mat-cage Steel


Type-of-bore-mm 95

Diameter-od-mm 170

Width-height-mm 32


BRG ROLLER NU219ECJ + HJ219EC 95MM 170M 30.09.2018

Bearings;Roller

Type Cylindrical Roller Bearing + Angle Ring

Series Explorer CRB

Mat-cage STEEL

Designation number NU219ECJ+HJ219EC

Type-of-bore-mm 95

Diameter-od-mm 170


BRG ROLLR M NU232ECMA 160MM 290MM 30.09.2018

BRG ROLLR M NU232ECMA 160MM 290MM

Bearings;Roller;Metric

Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15



Designation-skf-number NU 232 ECMA

Type-of-bore-mm 160

Diameter-od-mm 290

Width-height-mm 48

Equivalent FAG Tag No : NU232E.M1A_______________________________________________________________________04880 58.06.08.436.5 1 Piece

BRG ROLLR M NU236ECMA 180MM 320MM 30.09.2018

BRG ROLLR M NU236ECMA 180MM 320MM

Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15



Designation-skf-number NU 236 ECMA

Type-of-bore-mm 180

Diameter-od-mm 320






Equivalent FAG Tag No : NU236E.M1A_______________________________________________________________________04890 58.06.08.616.5 6 Piece

BRG ROLLR M NJ216ECJ 80MM 140MM 30.09.2018

BRG ROLLR M NJ216ECJ 80MM 140MM


Type cylindrical

Series NJ 200

Rows single

Design-spec ISO 15

Design-spec ISO 246

Style w/angle ring HJ 216 EC


Designation-skf-number NJ 216 ECJ

Type-of-bore-mm 80

Diameter-od-mm 140

Width-height-mm 26

Equivalent FAG Tag No : NJ216E.M1_______________________________________________________________________04900 58.06.08.706.5 8 each

BRG ROLLER NU207ECJ 35MM 72M 30.09.2018


Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 35

Diameter-od-mm 72

Width-height-mm 17

Equivalent FAG Tag No.NU 207 E JP1_______________________________________________________________________04910 58.06.08.808.5 1 Piece

BRG ROLLR M NU208ECP 40MM 80MM 30.09.2018

BRG ROLLR M NU208ECP 40MM 80MM

Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15



Designation-skf-number NU 208 ECP

Type-of-bore-mm 40

Diameter-od-mm 80

Width-height-mm 18

Equivalent FAG Tag No : NU208E.TVP2_______________________________________________________________________








Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 85

Width-height-mm 19

Equivalent FAG Tag No : NU209E.TVP2_______________________________________________________________________04930 58.06.08.811.5 2 Piece



Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 55

Diameter-od-mm 100

Width-height-mm 21





Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22

Equivalent FAG Tag No : NU 212 E.M1_______________________________________________________________________








Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 23

Equivalent FAG Tag No : NU213E.TVP2_______________________________________________________________________04960 58.06.08.815.5 4 each

BRG ROLLER NU213ECMC3 65MM 120MM 30.09.2018

BRG ROLLER NU213ECMC3 65MM 120MM

"Name BEARINGS, ROLLER"

Type CYLINDRICAL

Rows SINGLE

Style DOUBLE RIBBED OUTER RING

Mat-cage BRASS

Designation-skf-number NU213ECM/C3

Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 23

Equivalent FAG Tag No.NU 213 E.M1.C3_______________________________________________________________________04970 58.06.08.816.5 3 Piece



Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 140

Width-height-mm 26










Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 90

Diameter-od-mm 160

Width-height-mm 30

Equivalent FAG Tag No : NU 218 E.M1_______________________________________________________________________04990 58.06.08.819.5 5 Piece

BRG ROLLR MTR NU218ECMC3 90MM 160MM 30.09.2018

BRG ROLLR MTR NU218ECMC3 90MM 160MM

Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15



Designation-skf-number NU 218 ECM C3

Type-of-bore-mm 90

Diameter-od-mm 160

Width-height-mm 30




Type cylindrical

Series NU 200

Rows single

Design-spec ISO 15




Type-of-bore-mm 120

Diameter-od-mm 215

Width-height-mm 40









Bearings;Roller

Type cylindrical

Series Explorer CRB

Mat-cage STEEL

Designation number NU 226 ECJ

Type-of-bore-mm 130

Diameter-od-mm 230

Width-height-mm 40


BRG ROLLR I MRJ1.3/4 4.1/4IN 30.09.2018

Type cylindrical

Series MRJ

Rows single

Design-spec BS 292



Designation-rhp-number MRJ 1.3/4




BRG ROLLR MTR N309ECP 45MM 100MM 30.09.2018

BRG ROLLR MTR N309ECP 45MM 100MM

Type cylindrical

Series N 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25

Equivalent FAG Tag No : N309E.TVP2_______________________________________________________________________05040 58.06.11.209.7 4 each

BRG ROLLER N309ECM/VQ250/R820 30.09.2018

BRG ROLLER N309ECM/VQ250/R820

Bearings;Roller





Amount in Words_______________________________________________________________________Type cylindrical

Series Explorer CRB

Mat-cage BRASS

Designation number N 309ECM/VQ250/R820

Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25

Equivalent FAG Tag No.N 309 E.M1_______________________________________________________________________05050 58.06.11.212.7 4 each



Bearings;Roller

Type cylindrical

Series Explorer CRB

Mat-cage BRASS


Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No : N312E.M1_______________________________________________________________________05060 58.06.11.213.7 6 each



Bearings;Roller

Type cylindrical

Series Explorer CRB

Mat-cage BRASS


Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33




Bearings;Roller

Type cylindrical

Series Explorer CRB

Mat-cage BRASS


Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : N316E.M1_______________________________________________________________________05080 58.06.11.218.7 4 each



Bearings;Roller

Type cylindrical

Series Explorer CRB

Mat-cage BRASS


Type-of-bore-mm 90

Diameter-od-mm 190

Width-height-mm 43




Bearings;Roller

Type CYLINDRICAL

Series Explorer CRB

Mat-cage BRASS


Type-of-bore-mm 120

Diameter-od-mm 260

Width-height-mm 55

Equivalent FAG Tag No : N324E.M1_______________________________________________________________________05100 58.06.11.306.5 1 Piece



Type cylindrical

Series N 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19









Series N 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25




Type cylindrical

Series N 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27




Type cylindrical

Series N 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39


BRG ROLLR M NU307ECJ 35MM 80MM 30.09.2018

BRG ROLLR M NU307ECJ 35MM 80MM







Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 80




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23

Equivalent FAG Tag No : NU308E.JP1_______________________________________________________________________05160 58.06.11.410.5 34 Piece




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27










Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33


BRG ROLLER SKF NU316ECM 80MM 170MM 30.09.2018

BRG ROLLER SKF NU316ECM 80MM 170MM





Amount in Words_______________________________________________________________________Bearings;Roller;Metric

Type CYLINDRICAL

Series NU 300

Rows SINGLE

Design-spec ISO 15

Style DOUBLE RIBBED OUTER RING


Designation-skf-number NU 316 ECM

Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39

BEARING ROLLER SKF NU316 OR EQUAL

Equivalent FAG Tag No.NU 316 E.M1_______________________________________________________________________05210 58.06.11.417.5 4 Piece

BRG ROLLR MTR NU316 ECJ 80MM 170MM 30.09.2018

BRG ROLLR MTR NU316 ECJ 80MM 170MM

Type cylindrical

Series NU 316

Rows single

Designation-skf-number NU316 ECJ

Type-of-bore-mm 80

Diameter-od-mm 170

LOCATION: FCCU (HVU).


BRG ROLLR M NU322ECM 110MM 240MM 30.09.2018

BRG ROLLR M NU322ECM 110MM 240MM

Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 50


BRG ROLLER NJ2309 45MM 100MM 30.09.2018


Type Roller Bearing

Series Explorer CRB





Amount in Words_______________________________________________________________________Rows Single

Mat-cage POLYAMIDE

Designation-skf-number NJ2309

Type-of-bore-mm 45

Diameter-od-mm 100


BRG ROLLR M NJ312ECP 60MM 130MM 30.09.2018

BRG ROLLR M NJ312ECP 60MM 130MM

Type cylindrical

Series NJ 300

Rows single

Design-spec ISO 15



Designation-skf-number NJ 312 ECP

Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31

Equivalent FAG Tag No : NJ312E.TVP2_______________________________________________________________________05250 58.06.11.713.7 4 each

BRG ROLLER NUP313ECJ 65MM 140MM 30.09.2018

BRG ROLLER NUP313ECJ 65MM 140MM

Bearings;Roller

Type CYLINDRICAL

Series Explorer CRB

Mat-cage STEEL

Designation number NUP313ECJ

Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33

Equivalent FAG Tag No : NUP313E.M1_______________________________________________________________________05260 58.06.11.805.5 10 Piece

BRG ROLLR NU305ECP 25MM 62MM 30.09.2018

BRG ROLLR NU305ECP 25MM 62MM

Type cylindrical

Series NU 300

Rows single

Design spec ISO 15


"Mat-cage GLASS FIBRE REINF,POLYAMIDE6.6"

Designation number NU 305 ECP

Type-of-bore-mm 25






Width-height-mm 17




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 35

Diameter-od-mm 80

Width-height-mm 21





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15


Mat-cage STEEL CAGE


Type-of-bore-mm 40






Width-height-mm 23





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 25





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15









Diameter-od-mm 120

Width-height-mm 29




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15


Mat-cage STEEL CAGE


Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 33





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15







Amount in Words_______________________________________________________________________Designation-skf-number NU 314 ECP

Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 85

Diameter-od-mm 180

Width-height-mm 41




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15






Amount in Words_______________________________________________________________________Mat-cage GLASS FIBRE REINF.POLYAMIDE6.6


Type-of-bore-mm 90

Diameter-od-mm 190

Width-height-mm 43




Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 95

Diameter-od-mm 200

Width-height-mm 45





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15




Type-of-bore-mm 100

Diameter-od-mm 215

Width-height-mm 47





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15





Amount in Words_______________________________________________________________________Style double ribbed outer ring

Mat-cage STEEL CAGE


Type-of-bore-mm 105

Diameter-od-mm 225

Width-height-mm 49


CDLT BRG ROLLR M NU322ECJ 110MM 240MM 30.09.2018

*DNR* BRG ROLLR M NU322ECJ 110MM 240MM

"Bearings,Roller,Metric"

Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15


Mat-cage STEEL


Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 50





Type cylindrical

Series NU 300

Rows single

Design-spec ISO 15


Mat-cage pressed steel/brass


Type-of-bore-mm 120

Diameter-od-mm 260

Width-height-mm 55


BRG ROLLR MTR NU324ECM 120MM 260MM 30.09.2018

BRG ROLLR MTR NU324ECM 120MM 260MM

Type cylindrical

Series NU 300

Rows single







Mat-cage GLASS NREINF.POLYAMIDE6.6


Type-of-bore-mm 120

Diameter-od-mm 260

Width-height-mm 55

LOCATION: CCU.


BRG ROLLER NU314C3 30.09.2018

Name BEARING

Type ROLLER CYLINDRICAL

Mat-cage STEEL

Designation-skf-number NU314C3_______________________________________________________________________05460 58.06.11.905.5 29 each



Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 25

Diameter-od-mm 62




Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 35

Diameter-od-mm 80




Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 23





Amount in Words_______________________________________________________________________Equivalent FAG Tag No.NU 308 E.JP1_______________________________________________________________________05490 58.06.11.909.5 28 each



Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 45

Diameter-od-mm 100





Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27

Equivalent FAG Tag No.NU 310 E.JP1_______________________________________________________________________05510 58.06.11.911.5 28 each



Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29

EQUIVALENT FAG TAG NO. NU 311 E.JP1

_______________________________________________________________________05520 58.06.11.912.5 28 each




Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31





Amount in Words_______________________________________________________________________Equivalent FAG Tag No.NU 312 E.M1_______________________________________________________________________05530 58.06.11.914.5 30 each




Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 35





Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 37


BRG ROLLER NU316ECM 80MM 170MM 30.09.2018


Series Explorer CRB

Mat-cage Brass

Designation-skf-number NU316ECM

Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 39





Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 95

Diameter-od-mm 200





Amount in Words_______________________________________________________________________Equivalent FAG Tag No.NU 319 E.M1_______________________________________________________________________05570 58.06.11.924.5 5 each




Series Explorer CRB

Mat-cage Steel


Type-of-bore-mm 120

Diameter-od-mm 260

Width-height-mm 55


BRG ROLLER NUP2206 30MM 62MM 30.09.2018

Name ROLLER BEARING

Type CYLINDRICAL

Rows SINGLE

Mat-cage STEEL

Designation-skf-number NUP 2206

Type-of-bore-mm 30

Diameter-od-mm 62


BRG ROLLER NU413 65MM 160MM 30.09.2018


Series Explorer CRB

Mat-cage Steel

Designation-skf-number NU413

Type-of-bore-mm 65

Diameter-od-mm 160

Width-height-mm 37

Equivalent FAG Tag No.NU 413 M1_______________________________________________________________________05600 58.06.14.413.5 7 Piece

BRG ROLLR MTR NU 413 65MM 160MM 30.09.2018

BRG ROLLR MTR NU 413 65MM 160MM


Type cylindrical

Series NU 400

Rows single

Design-spec ISO 15







Amount in Words_______________________________________________________________________Designation-skf-number NU 413

Type-of-bore-mm 65

Diameter-od-mm 160

Width-height-mm 37

Equivalent FAG Tag No : NU413M1_______________________________________________________________________05610 58.06.80.010.5 1 Piece

"BEARING,NU222ECM" 30.09.2018

"BEARING,NU222ECM"

BEARING

SIZE : NU222ECM

FOR MOTOR FOR PUMP

MFR. : BHEL

TAG : 131-PM-110A/B/C



"BEARING,NU217M" 30.09.2018

"BEARING,NU217M"

BEARING

SIZE : NU217M

FOR MOTOR FOR PUMP

MFR. : BHEL

TAG : 131-PM-137A/B/C



"BEARING,NU317P63" 30.09.2018

"BEARING,NU317P63"

BEARING

SIZE : NU317P63

FOR PUMP MOTOR 160KW

MFR. : NGEF

TAG : 131-PM-106A/B


Equivalent FAG Tag No : NU317E.M1.P63_______________________________________________________________________05640 58.06.80.013.5 1 Piece

"BEARING,NU226" 30.09.2018

"BEARING,NU226"

BEARING

SIZE : NU226

FOR MOTOR FOR PUMP

MFR. : NGEF





Amount in Words_______________________________________________________________________TAG : 131-PM-107A/B



"BEARING,NU216M" 30.09.2018

"BEARING,NU216M"

BEARING

SIZE : NU216M

FOR MOTOR FOR PUMP

MFR. : BHEL

TAG : 131-PM-113A/B / 131-PM-114A/B/C



"BEARING,NU215M" 30.09.2018

"BEARING,NU215M"

BEARING

SIZE : NU215M

FOR MOTOR FOR PUMP

MFR. : BHEL

TAG : 131-PM-113A/B / 131-PM-114A/B/C



"BEARING,NU221C3" 30.09.2018

"BEARING,NU221C3"

BEARING

SIZE : NU221C3

FOR MOTOR FOR PUMP

MFR. : CGL

TAG : 131-PM-141 A/B



"BEARING,NU218MC3" 30.09.2018

"BEARING,NU218MC3"

BEARING

SIZE : NU218MC3

FOR MOTOR FOR PUMP

MFR. : CGL

TAG : 131-PM-108 A/B / 131-PM-109 A/B






Amount in Words_______________________________________________________________________Equivalent FAG Tag No : NU218E.M1.C3_______________________________________________________________________05690 58.06.80.018.5 1 Piece

"BEARING,NU224M,SKF" 30.09.2018

"BEARING,NU224M,SKF"

BEARING

SIZE : NU224M

MAKE : SKF

FOR COMPRESSOR

MAKE : BHEL

TAG : COMPRESSOR 133-KM-303 / 307

LOCATION : HGU-RMP


"BEARING,NU220M" 30.09.2018

"BEARING,NU220M"

BEARING

SIZE : NU220M

FOR MOTOR FOR PUMP

MAKE : BHEL

TAG : 131-PM-101A/B / 131-PM-133A/B



BRG NU219M 30.09.2018

"BEARING,NU219M"

"BEARING,NU219M"

BEARING

SIZE : NU219M


"BEARING,ROLLER,NU232M,SKF" 30.09.2018

"BEARING,ROLLER,NU232M,SKF"

"ROLLER BEARING, SKF, DE SIDE"

SIZE : NU 232 M

FOR MOTOR FOR PUMP

MAKE : BHEL

TAG : 133-KM-304A/B

LOCATION : HGU-RMP







Amount in Words_______________________________________________________________________"BEARING,ROLLER,NU228M,SKF"

"ROLLER BEARING, SKF, NDE SIDE"

SIZE : NU 228 M

FOR MOTOR FOR PUMP

MAKE : BHEL

TAG : 133-KM-304A/B

LOCATION : HGU-RMP



"BEARING,ROLLER,NU238M,SKF"

"ROLLER BEARING, SKF, DE & NDE SIDE"

SIZE : NU 238 M

FOR MOTOR FOR COMPRESSOR

MAKE : BHEL

TAG : 132-KM 202 A/B

LOCATION : HCU-RMP


"BEARING,ROLLER,NU216ECM" 30.09.2018

"BEARING,ROLLER,NU216ECM"

ROLLER BEARING

SIZE : NU216ECM

FOR MOTOR FOR PUMP


MAKE : BHEL

TAG : 131PM134B

SR. NO. : 42027A-411-51-02



"BEARING,ROLLER,NU219ECM" 30.09.2018

"BEARING,ROLLER,NU219ECM"

ROLLER BEARING

SIZE : NU219ECM

FOR MOTOR FOR PUMP


MAKE : BHEL

TAG : 131PM134B

SR. NO. : 42027A-411-51-02


Equivalent FAG Tag No : NU219E.M1_______________________________________________________________________






BRG ROLLER B88-OH 11/16IN 30.09.2018

Bearings;Roller

Type Needle Roller Bearing

Rows SINGLE

Style WITH OPEN

Mat-cage STEEL

Designation-rhp-number B88-OH(SKF-S88)


Diameter-od-inch 11/16


BEARING NEEDLE TORRINGTON B-88-OH_______________________________________________________________________05780 58.06.89.210.7 6 each

BRG ROLLER BA1210 1IN 30.09.2018

Bearings;Roller


Mat-cage STEEL

Designation-rhp-number BA1210


Diameter-od-inch 1


BEARING NEEDLE TORRINGTON B-1210-0H_______________________________________________________________________05790 58.06.89.212.7 4 each

BRG ROLLER BA1212Z 1IN 30.09.2018

Bearings;Roller


Mat-cage STEEL

Designation-rhp-number BA1212Z


Diameter-od-inch 1


BEARING NEEDLE 3/4 X 1 X 3/4 TORRINGTON B-1212_______________________________________________________________________05800 58.06.89.812.7 8 each

BRG ROLLER B812 11/16 30.09.2018

Bearings;Roller

Type Needle roller Bearing without inner race

Mat-cage STEEL

Designation-rhp-number B812-OH(SKF-S812)


Diameter-od-inch 11/16


BEARING NEEDLE TORRINGTON B 812 OH_______________________________________________________________________






BRG ROLLER 23024CCW33 120MM 180MM 30.09.2018

BRG ROLLER 23024CCW33 120MM 180MM

Name ROLLER BEARING

Type SPHERICAL


Designation-skf-number 23024 CC/W33

Type-of-bore-mm 120

Diameter-od-mm 180

Width-height-mm 46

Equivalent FAG Tag No.23024 E1A.M_______________________________________________________________________05820 58.07.07.229.5 4 each

BRG ROLLER 22226E 30.09.2018

BRG ROLLER 22226E

Bearings;Roller

Series Explorer SRB

Designation-number 22226E

Equivalent FAG Tag No : 22226 S.MB_______________________________________________________________________05830 58.07.07.230.5 4 each

BRG ROLLER 22224E 30.09.2018

BRG ROLLER 22224E

Bearings;Roller

Type SPHERICAL

Series Explorer SRB

Designation-number 22224E


BRG ROLLER 22209E 45MM 85MM 30.09.2018

BRG ROLLER 22209E 45MM 85MM

Bearings;Roller

Series Explorer SRB

Mat-cage STEEL

Designation number 22209E

Type-of-bore-mm 45

Diameter-od-mm 85

Width-height-mm 23

Equivalent FAG Tag No : 22209 E1A.M_______________________________________________________________________05850 58.07.07.310.7 4 each

BRG ROLLER 22210E 50MM 90MM 30.09.2018


Bearings;Roller





Amount in Words_______________________________________________________________________Series Explorer SRB

Mat-cage STEEL

Designation number 22210 E

Type-of-bore-mm 50

Diameter-od-mm 90

Width-height-mm 23


BRG ROLLER 22222E 110MM 200MM 30.09.2018


Bearings;Roller

Series Explorer SRB

Mat-cage STEEL


Type-of-bore-mm 110

Diameter-od-mm 200

Width-height-mm 53


BRG ROLLER 22222EK+H322 110MM 200MM 30.09.2018

BRG ROLLER 22222EK+H322 110MM 200MM

Bearings;Roller

Series Explorer SRB

Style Spherical Roller Bearing + Adapter Sleeve

Mat-cage STEEL

Designation number 22222EK + H322

Type-of-bore-mm 110

Diameter-od-mm 200

Width-height-mm 53

TAPPERED BORE


BRG ROLLR MTR 22212CC/C3 W33 30.09.2018

BRG ROLLR MTR 22212CC/C3 W33

Type spherical

Series 222 CC/W33

Rows double

Design-spec ISO 15

Style self-aligning


Designation-skf-number 22212 CC/C3 W33

Equivalent FAG Tag No : 22212E1.C3_______________________________________________________________________






BRG ROLLR M 22212E 60MM 110MM 30.09.2018

BRG ROLLR M 22212E 60MM 110MM

Type spherical

Series 222 CC/E

Rows double

Design-spec ISO 15

Style self-aligning



Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 28

Equivalent FAG Tag No : 22212E1_______________________________________________________________________05900 58.07.07.513.5 1 Piece

BRG ROLLR MTR 22213CCK/W33 W/H313 SLEEVE 30.09.2018

BRG ROLLR MTR 22213CCK/W33 W/H313 SLEEVE

Type spherical

Series 222 CCK/W33

Rows double

Design-spec ISO 15

Style tapered w/adapter sleeve H313


Designation-skf-number 22213 CCK/W33

DESIGNATION:22213 CCK/W33 WITH H313 SLEEVE

FOR FPU FD FAN (ALVI MAKE)

Equivalent FAG Tag No : 22213E1K + H313_______________________________________________________________________05910 58.07.07.514.5 1 Piece

BRG ROLLR MTR 22214E/C3 30.09.2018

BRG ROLLR MTR 22214E/C3

Type spherical

Series 222 CC/E

Rows double

Design-spec ISO 15

Style self-aligning


Designation-skf-number 22214 E/C3

Equivalent FAG Tag No : 22214E1.C3_______________________________________________________________________05920 58.07.07.515.5 4 Piece

BRG ROLLR M 22215E 75MM 130MM 30.09.2018







Amount in Words_______________________________________________________________________Type spherical

Series 222 CC/E

Rows double

Design-spec ISO 15

Style self-aligning



Type-of-bore-mm 75

Diameter-od-mm 130

Width-height-mm 31


BRG ROLLR M 22216E 80MM 140MM 30.09.2018


Type spherical

Series 222 CC/E

Rows double

Design-spec ISO 15

Style self-aligning



Type-of-bore-mm 80

Diameter-od-mm 140

Width-height-mm 33

Equivalent FAG Tag No : 22216 E1A.M_______________________________________________________________________05940 58.07.07.517.5 2 Piece

BRG ROLLR MTR 22217E/C3 30.09.2018


Type spherical

Series 222 CC/E

Rows double

Design-spec ISO 15

Style self-aligning




BRG ROLLR MTR 22218E/C3 30.09.2018


Type spherical

Series 222 CC/E

Rows double

Design-spec ISO 15





Amount in Words_______________________________________________________________________Style self-aligning




"HOUSING FOR 22217 BRG,SOFN 217,TLT,3&4" 30.09.2018

"HOUSING FOR 22217 BRG,SOFN 217,TLT,3&4"

SOFN 217 : HOUSING FOR 22217 ANTIFRICTION BEARING

MAKE : TLT ENGG INDIA PVT LTD

PN : 3&4

SPARE FOR ID FAN

MODEL: 1688ZA/984

SR.NO: 1090

DW : 10500

TAG : 132ID201

LOCN : RMP

Equivalent FAG Tag No : SOFN217_______________________________________________________________________05970 58.07.07.520.5 1 Piece

BRG ROLLR MTR 22220 ESTVPBC3 30.09.2018

BRG ROLLR MTR 22220 ESTVPBC3

Type spherical

Rows double

Design-spec ISO 15


Designation-skf-number 22220 ESTVPBC3

FOR HCP ID FAN (ROTHEMULE MAKE)


BRG ROLLR MTR 2214 30.09.2018

BRG ROLLR MTR 2214

Type spherical

Rows double


BEARING FOR B1-FD FAN

MAKE : SKF BEARINGS

LOCATION : CDU


BRG ROLLR MTR 2218C3 30.09.2018

BRG ROLLR MTR 2218C3

Type spherical

Rows double





Amount in Words_______________________________________________________________________Designation-skf-number 2218 C3

BEARING FOR B1-FD FAN

MAKE : SKF BEARINGS

LOCATION : CDU


BRG ROLLR MTR 22216EK WITH SLEEVE H 316 30.09.2018

BRG ROLLR MTR 22216EK WITH SLEEVE H 316

Type spherical

Rows double

Designation-skf-number 22216 EK

BEARING 22216 EK

WITH SLEEVE H 316

FOR ID FAN

MAKE : SKF BEARINGS

LOCATION : FPU

Equivalent FAG Tag No : 22216E1K + H316_______________________________________________________________________06010 58.07.07.524.5 1 Piece

BRG ROLLR MTR 22222E/C3 30.09.2018


Type spherical

Rows double


BEARING 22222 E/C3

FOR B1-ID FAN

MAKE : SKF BEARINGS

LOCATION : CDU


BRG ROLLR MTR 22218E 30.09.2018

BRG ROLLR MTR 22218E

Type spherical

Rows double


BEARING 22218 E

FOR FD FAN - A/B

TAG : HEB1/HEB2/HEB3-FD FAN-A/B

LOCATION : BOILER HOUSE


"BEARING,ANTIFRICTION,22214,SKF,PN:3&4" 30.09.2018

"BEARING,ANTIFRICTION,22214,SKF,PN:3&4"





Amount in Words_______________________________________________________________________SKF 22214 ANTIFRICTION BEARING

PN : 3&4

FOR FAN

MFR. : M/S. TLT ENGINEERING INDIA PVT LTD

MODEL : 21271B/804

SR. NO. : 1088

TAG NO. : 132FD201A/B

DW. NO. : 10500

LOCATION : HCU


"HOUSING FOR 22214 SKF BEARING,PN:3&4" 30.09.2018

"HOUSING FOR 22214 SKF BEARING,PN:3&4"

LOE 214: HOUSING FOR 22214 ANTIRICTION BEARING

PN : 3&4

MOC : CS

FOR FAN

MFR. : M/S. TLT ENGINEERING INDIA PVT LTD

MODEL : 21271B/804

SR. NO. : 1088

TAG NO. : 132FD201A/B

DW. NO. : 10500

LOCATION : HCU

Equivalent FAG Tag No : 22214E1_______________________________________________________________________06050 58.07.07.613.7 3 each

BRG ROLLER 22213E 65MM 120MM 30.09.2018


Bearings;Roller

Series Explorer SRB

Mat-cage STEEL


Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 31


BRG ROLLER 22220E 100MM 180MM 30.09.2018


Bearings;Roller

Series Explorer SRB

Mat-cage STEEL


Type-of-bore-mm 100






Width-height-mm 46


BRG ROLLER 22322E 110MM 240MM 30.09.2018


Bearings;Roller

Series Explorer SRB

Mat-cage STEEL


Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 80


BRG ROLLER 22310E 50MM 110MM 30.09.2018


Bearings;Roller

Series Explorer SRB

Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 40


BRG ROLLER 22312E 60MM 130MM 30.09.2018


Bearings;Roller

Series Explorer SRB

Mat-cage STEEL


Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 46


BRG ROLLER 22315E 75MM 160MM 30.09.2018



Bearings;Roller

Series Explorer SRB







Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 55


BRG ROLLER 22316E 80MM 170MM 30.09.2018



Bearings;Roller

Series Explorer SRB

Mat-cage STEEL


Type-of-bore-mm 80

Diameter-od-mm 170

Width-height-mm 58

Equivalent FAG Tag No : 22316 E1A.M_______________________________________________________________________06120 58.07.10.520.5 10 Piece

BRG ROLLR M 22320E 100MM 215MM 30.09.2018


Type spherical

Series 223 CC/E

Rows double

Design-spec ISO 15

Style self-aligning



Type-of-bore-mm 100

Diameter-od-mm 215

Width-height-mm 73


BRG ROLLR MTR 22320E/C3 100MM 215MM 30.09.2018

BRG ROLLR MTR 22320E/C3 100MM 215MM

Type spherical

Series 223 CC/E

Rows double

Design-spec ISO 15

Style self-aligning



Type-of-bore-mm 100






Width-height-mm 73

BEARING FOR DIESEL FIRE PUMP

MAKE : KBL

MODEL : BHR 42-30

Equivalent FAG Tag No : 22320E1.C3_______________________________________________________________________06140 58.07.15.520.5 3 each

BRG ROLLER SPHERICAL 232202-CS/VT143 30.09.2018

Bearings;Roller

Type Sealed Spherical Roller Bearing

Series Explorer SRB


Designation number 23220-2CS/VT143_______________________________________________________________________06150 58.07.15.521.5 2 Piece

BRG ROLLER 22217E 85MM 150MM 30.09.2018

Service -

Series Explorer SRB

Mat-cage STEEL

Designation-skf-number 22217E

Type-of-bore-mm 85

Diameter-od-mm 150

Width-height-mm 36

BEARING FOR PUMP

TAG NO : 008NP1D & 008NP5F

LOCATION: BBU_______________________________________________________________________06160 58.07.15.522.5 2 each

BRG ROLLER 22314E 70MM 150MM 30.09.2018

Service -

Series Explorer SRB

Mat-cage STEEL

Designation-skf-number 22314E

Type-of-bore-mm 70

Diameter-od-mm 150


BRG ROLLR M 22319EK 85MM 200MM 30.09.2018

BRG ROLLR M 22319EK 85MM 200MM

Type spherical

Series 223 CCK/EK

Rows double

Design-spec ISO 113/1

Design-spec ISO 15





Amount in Words_______________________________________________________________________Style tapered w/adapter sleeve H2319



Type-of-bore-mm 85

Diameter-od-mm 200

Width-height-mm 67

Equivalent FAG Tag No : 22319E1K_______________________________________________________________________06180 58.07.30.520.5 1 Piece

BRG ROLLR MTR 22319C 30.09.2018

BRG ROLLR MTR 22319C

TYPE SPHERICAL

ROWS DOUBLE

MAT-CAGE PRESSED STEEL

DESIGNATION-SKF-NUMBER 22319 C


BRG ROLLER 22207EK 35MM 72MM 30.09.2018

BRG ROLLER 22207EK 35MM 72MM

Bearings;Roller

Series Explorer SRB

Style Spherical Roller Bearing with Tapered Bore


Designation number 22207 EK

Type-of-bore-mm 35

Diameter-od-mm 72

Width-height-mm 23

BEARING SPHERICAL ROLLER TAPERED BORE

Equivalent FAG Tag No : 22207E1K_______________________________________________________________________06200 58.07.30.711.7 4 each

BRG ROLLER 22211EK 55MM 100MM 30.09.2018

BRG ROLLER 22211EK 55MM 100MM

Bearings;Roller

Type spherical

Series Explorer SRB

Style Spherical Roller Bearing with Tapered Bore

Mat-cage STEEL

Designation number 22211EK

Type-of-bore-mm 55

Diameter-od-mm 100

Width-height-mm 25

Equivalent FAG Tag No : 22211 E1AK.M_______________________________________________________________________






SKF BEARING 22322EK WITH TAPER SLEEVE 30.09.2018

SKF BEARING 22322EK WITH TAPER SLEEVE


Type spherical

Series 223 CCK/EK

Rows double

Design-spec ISO 15




Type-of-bore-mm 110

Diameter-od-mm 240

Width-height-mm 80


FOR CDU-NB2A-FD FAN

FAN MAKE:ANDREW YULE

TAG NO:NB2A-FD FAN

LOCATION:CDU

Equivalent FAG Tag No : 22322E1K_______________________________________________________________________06220 58.07.30.720.5 4 Piece

BRG ROLLR M 22320EK 100MM 215MM 30.09.2018

BRG ROLLR M 22320EK 100MM 215MM


Type spherical

Series 223 CCK/EK

Rows double

Design-spec ISO 15




Type-of-bore-mm 100

Diameter-od-mm 215

Width-height-mm 73

Equivalent FAG Tag No : 22320 E1AK.M_______________________________________________________________________06230 58.07.30.721.7 4 each

BRG ROLLER 22220EK +H320 100MM 180MM 30.09.2018

BRG ROLLER 22220EK +H320 100MM 180MM

Bearings;Roller

Type spherical

Series Explorer SRB

Style Spherical Roller Bearing + Adapter Sleeve

Mat-cage STEEL





Amount in Words_______________________________________________________________________Designation number 22220EK + H 320

Type-of-bore-mm 100

Diameter-od-mm 180

Width-height-mm 46

FOR FD FAN


BRG ROLLR M 30202 JZ -- -- 30.09.2018

BRG ROLLR M 30202 JZ -- --

Type taper

Series 30200

Rows single

Design-spec DIN 720

Style LIGHT TYPE WITH ONE SHIELD



Type-of-bore-mm --

Diameter-od-mm --

Width-height-mm --

Equivalent FAG Tag No : 30202A_______________________________________________________________________06250 58.08.07.204.5 7 Piece

BRG ROLLR MTR 30204 J2/Q 20MM 47MM 30.09.2018

BRG ROLLR MTR 30204 J2/Q 20MM 47MM


Type taper

Series 30200

Rows single

Design-spec DIN 720

Style light type


Designation-skf-number 30204 J2 / Q

Type-of-bore-mm 20

Diameter-od-mm 47






Type taper

Series 30200

Rows single

Design-spec DIN 720





Amount in Words_______________________________________________________________________Style light type



Type-of-bore-mm 25

Diameter-od-mm 52






Type taper

Series 30200

Rows single

Design-spec DIN 720

Style light type



Type-of-bore-mm 35

Diameter-od-mm 72





Type taper

Series 30200

Rows single

Design-spec DIN 720

Style light type



Type-of-bore-mm 40

Diameter-od-mm 80



BRG ROLLR MTR 30222 J2 110MM 200MM 30.09.2018

BRG ROLLR MTR 30222 J2 110MM 200MM


Type taper

Series 30200

Rows single






Style light type


Designation-skf-number 30222 J2

Type-of-bore-mm 110

Diameter-od-mm 200

Width-height-mm 41


BRG ROLLR MTR 30210J2 50MM 90MM 30.09.2018

BRG ROLLR MTR 30210J2 50MM 90MM


Type taper

Series 30200

Rows single

Design-spec DIN 720

Style light type with one shield



Type-of-bore-mm 50

Diameter-od-mm 90



BRG ROLLR MTR 30213J2 65MM 120MM 30.09.2018

BRG ROLLR MTR 30213J2 65MM 120MM

Type taper

Series 30200

Rows single

Design-spec DIN 720

Style light type with one shield



Type-of-bore-mm 65

Diameter-od-mm 120



BRG ROLLER 30219J2 95MM 170MM 30.09.2018

BRG ROLLER 30219J2 95MM 170MM

Bearings;Roller

Series TAPER ROLLER BEARING

Mat-cage STEEL





Amount in Words_______________________________________________________________________Designation number 30219 J2

Type-of-bore-mm 95

Diameter-od-mm 170

Width-height-mm 32




Type taper

Series 32300

Rows single

Design-spec DIN 720

Style LIGHT TYPE


Designation-skf-number 32314 J2/Q

Type-of-bore-mm 70

Diameter-od-mm 150

Width-height-mm 54


MODEL : 32314

MFR : SKF

DESIGN SPEC : DIN 720 ST-KAEF

SPARE BEARING FOR AGITATOR AND GEAR BOX

LOCATION : BBU


BRG ROLLR MTR 33215 Q 75MM 130MM 30.09.2018

BRG ROLLR MTR 33215 Q 75MM 130MM

Type taper

Series 33200

Rows single

Design-spec DIN 720

Style LIGHT TYPE


Designation-skf-number 33215 Q

Type-of-bore-mm 75

Diameter-od-mm 130

Width-height-mm 41


MODEL : 33215

MFR : SKF

DESIGN SPEC : DIN 720 ST-KAEF

SPARE BEARING FOR AGITATOR AND GEAR BOX

LOCATION : BBU





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : 33215_______________________________________________________________________06350 58.08.07.602.7 11 each

BRG ROLLER 30202 30.09.2018

BRG ROLLER 30202

Bearings;Roller


Mat-cage STEEL



BRG ROLLER 30206J2/Q 30MM 62MM 30.09.2018

BRG ROLLER 30206J2/Q 30MM 62MM

Bearings;Roller

Type taper

Mat-cage STEEL

Designation number 30206J2/Q

Type-of-bore-mm 30

Diameter-od-mm 62

Width-height-mm 16




Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 45

Diameter-od-mm 85

Width-height-mm 19

BEARING TAPER ROLLER 30209




Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 22





Amount in Words_______________________________________________________________________Equivalent FAG Tag No : 30212A_______________________________________________________________________06390 58.08.07.614.7 4 each



Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 70

Diameter-od-mm 125

Width-height-mm 26


BRG ROLLER 30221 J2 105MM 190MM 30.09.2018

BRG ROLLER 30221 J2 105MM 190MM

Bearings;Roller


Mat-cage STEEL

Designation number 30221 J2

Type-of-bore-mm 105

Diameter-od-mm 190

Width-height-mm 36




Type taper

Series 30300

Rows single

Design-spec DIN 720

Style medium type



Type-of-bore-mm 15

Diameter-od-mm 42





Bearings;Roller








Type-of-bore-mm 55

Diameter-od-mm 120

Width-height-mm 29





Type taper

Series 30300

Rows single

Design-spec DIN 720

Style medium type



Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 40




Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 20

Diameter-od-mm 52

Width-height-mm 15


BRG ROLLER 30305C 25MM 62MM 30.09.2018

BRG ROLLER 30305C 25MM 62MM

Bearings;Roller


Mat-cage STEEL

Designation number 30305 C

Type-of-bore-mm 25

Diameter-od-mm 62

Width-height-mm 17

Equivalent FAG Tag No : 30305A_______________________________________________________________________






BRG ROLLER 30306J2/QCLN 30MM 72MM 30.09.2018

BRG ROLLER 30306J2/QCLN 30MM 72MM

Bearings;Roller


Mat-cage STEEL

Designation number 30306 J2/QCLN

Type-of-bore-mm 30

Diameter-od-mm 72

Width-height-mm 19




Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 27




Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 60

Diameter-od-mm 130

Width-height-mm 31


BRG TAPER ROLLER 31313A 65MM 140MM 36MM 30.09.2018

Name BEARING

Type TAPER ROLLER

Design-spec 31313A


Designation-skf-number -







Amount in Words_______________________________________________________________________Width-height-mm 36MM

DYNAMIC LOAD BEARING:43409N

STATIC LOAD BEARING:51571N

STYLE:COMPLETE ASSEMBLY_______________________________________________________________________06500 58.08.19.113.5 4 each

BRG TAPER ROLLER 32013 30.09.2018

Name TAPER ROLLER BEARING 32013

EQUIVALENT FAG TAG NO. 32013 X

_______________________________________________________________________06510 58.08.19.115.5 6 each

BRG TAPER ROLLER 32015X/Q 75MM 115MM 25M 30.09.2018

Name TAPER ROLLER BEARING

Mat-cage STEEL

Designation number 32015 X/Q



Width-height-mm 25MM

Equivalent FAG Tag No.32015 X_______________________________________________________________________06520 58.08.19.120.7 4 each

BRG ROLLER SKF 32020 100MM 150MM 30.09.2018

BRG ROLLER SKF 32020 100MM 150MM


Type taper

Series 32200

Rows single

Design-spec DIN 720

Style light type wide



Type-of-bore-mm 100

Diameter-od-mm 150

Width-height-mm 30

Equivalent FAG Tag No : 32020X_______________________________________________________________________06530 58.08.19.205.5 3 each

BRG TAPER ROLLER 32205 25MM 52MM 1 30.09.2018

BRG TAPER ROLLER 32205 25MM 52MM 1

Name BEARING TAPER ROLLER




Diameter-od-mm 52MM

Width-height-mm 19.25MM





Amount in Words_______________________________________________________________________Equivalent FAG Tag No.32205 A_______________________________________________________________________06540 58.08.19.207.5 4 Piece




Mat-cage STEEL


Type-of-bore-mm 35

Diameter-od-mm 72





Type taper

Series 32200

Rows single

Design-spec DIN 720



Designation-skf-number 32209 J2/Q

Type-of-bore-mm 45

Diameter-od-mm 85





Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 55

Diameter-od-mm 100

Width-height-mm 27


BRG ROLLER 330201/Q ( 32212 J2/Q) 30.09.2018

BRG ROLLER 330201/Q ( 32212 J2/Q)

Bearings;Roller


Mat-cage STEEL





Amount in Words_______________________________________________________________________Designation number 330201/Q ( 32212 J2/Q )

Type-of-bore-mm 60

Diameter-od-mm 110

Width-height-mm 30


BRG ROLLR MTR 330356 B 65MM 120MM 30.09.2018

BRG ROLLR MTR 330356 B 65MM 120MM

Type taper

Series 32200

Rows single

Design-spec DIN 720



Designation-skf-number 330356 B

Type-of-bore-mm 65

Diameter-od-mm 120



BRG ROLLER 330356 B/Q (32213J2/Q) 30.09.2018

BRG ROLLER 330356 B/Q (32213J2/Q)

Bearings;Roller


Mat-cage STEEL

Designation number 330356 B/Q (32213J 2/Q)

Type-of-bore-mm 65

Diameter-od-mm 120

Width-height-mm 32


BRG TAPER ROLLER 32216 30.09.2018

Name BEARING TAPER ROLLER 32216

EQUIVALENT FAG TAG NO. 32216 A

_______________________________________________________________________06610 58.08.19.217.7 4 each



Bearings;Roller


Mat-cage STEEL







Diameter-od-mm 150

Width-height-mm 38


BRG ROLLER TAPERED 32218J2/Q 30.09.2018

BRG ROLLER TAPERED 32218J2/Q

Bearings;Roller




BRG TAPER ROLLER 32309J2/Q 30.09.2018

BRG TAPER ROLLER 32309J2/Q

Type TAPER ROLLER BEARING

Series 32309 J2/Q

Equivalent FAG Tag No.32309 A_______________________________________________________________________06640 58.08.19.446.5 4 each

BRG TAPER ROLLER L44643/44610Q 30.09.2018

Type TAPER ROLLER

Series L44643/44610Q_______________________________________________________________________06650 58.08.22.310.7 4 each



Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 50

Diameter-od-mm 110

Width-height-mm 42


BRG ROLLER 32311J2 55MM 120MM 30.09.2018


Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 55

Diameter-od-mm 120









Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 65

Diameter-od-mm 140

Width-height-mm 51


BRG ROLLER 32315J2 75MM 160MM 30.09.2018


Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 75

Diameter-od-mm 160

Width-height-mm 58


BRG ROLLER 32318J2 90MM 190MM 30.09.2018


Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 90

Diameter-od-mm 190

Width-height-mm 67


BRG ROLLER 32312J2Q 60MM 130MM 30.09.2018

BRG ROLLER 32312J2Q 60MM 130MM

Bearings;Roller


Mat-cage STEEL







Diameter-od-mm 130

Width-height-mm 48

BEARING TAPER ROLLER 32312 J2/Q STEEL CAGE


BRG ROLLER 31305J2 25MM 62MM 30.09.2018


Bearings;Roller


Mat-cage STEEL


Type-of-bore-mm 25

Diameter-od-mm 62



BRG ROLLER 31309/QCL7C 45MM 100MM 30.09.2018

BRG ROLLER 31309/QCL7C 45MM 100MM

Bearings;Roller


Mat-cage STEEL

Designation number 31309 J2/QCL7C

Type-of-bore-mm 45

Diameter-od-mm 100

Width-height-mm 27


BRG ROLLER 31308J2/QCL7CDF 30.09.2018

BRG ROLLER 31308J2/QCL7CDF

Bearings;Roller

Series Taper Roller Bearing paired mounting with appropr

Mat-cage STEEL

Designation number 31308 J2/QCL7CDF

Type-of-bore-mm 40

Diameter-od-mm 90

Width-height-mm 25

TO BE PURCHASED IN MATCHED PAIR

Equivalent FAG Tag No.31308 A_______________________________________________________________________06740 58.08.55.410.5 2 Piece

BRG ROLLR MTR 31310J2QCL 50MM 110MM 30.09.2018

BRG ROLLR MTR 31310J2QCL 50MM 110MM





Amount in Words_______________________________________________________________________Type taper

Series 31300

Rows single

Design-spec DIN 720

Design-spec ISO 355

Style medium type with one shield


Designation-skf-number 31310 J2/QCL7C

Type-of-bore-mm 50

Diameter-od-mm 110



BRG ROLLR MTR 31311J2Q 55MM 120MM 30.09.2018

BRG ROLLR MTR 31311J2Q 55MM 120MM

Type taper

Series 31300

Rows single

Design-spec DIN 720

Design-spec ISO 355

Style medium type with one shield


Designation-skf-number 31311 J2 Q

Type-of-bore-mm 55

Diameter-od-mm 120



BRG ROLLR MTR 31310J2/QCL7CDF03 30.09.2018

Type taper

Series 31300

Rows double

Design-spec DIN 720

Design-spec ISO 355


Designation-skf-number 31310 J2/QCL7CDF03_______________________________________________________________________06770 58.08.55.413.5 21 Piece

BRG ROLLR MTR 31312J2DF 60MM 130MM 30.09.2018

BRG ROLLR MTR 31312J2DF 60MM 130MM

TAPER ROLLER BEARING FOR 133P302A/B-BFW PUMP

Type : taper

Series : 31300

Rows : single





Amount in Words_______________________________________________________________________Design spec : DIN 720

Style : medium type with one shield

"Mat, cage : PRESSED STEEL"

Designation (skf number):31312 J2/DF

Type of bore :60

LOCATION :HGU

Equivalent FAG Tag No : 31312A.A80.120.N11CA_______________________________________________________________________06780 58.08.55.512.7 31 each

BRG ROLLER 31312J2/QDF 60MM 130MM 30.09.2018

BRG ROLLER 31312J2/QDF 60MM 130MM

Series : Taper Roller Bearing (Duplex(2)

bearings face-to-face arrangement)

including one outer ring spacer

Mat-cage : Steel

Designation number :31312J2/QDF

Type-of-bore-mm : 60

Diameter-od-mm :130

Width-height-mm :67

TO BE PURCHASED IN MATCHED PAIR

_______________________________________________________________________06790 58.09.28.208.5 6 each

BRG CONE&CUP 3188S/3120 30.09.2018

BRG CONE&CUP 3188S/3120

Name BEARING CUP & CONE

Designation number 3188S/3120

3120 CUP / 3188 S CONE

Equivalent FAG Tag No.K3188-S-3120_______________________________________________________________________06800 58.09.28.290.7 6 each

BRG CONE&CUP 48290/48220 30.09.2018

BRG CONE&CUP 48290/48220

Bearings;Roller

Mat-cage STEEL

Designation-number 48290/48220

Type-of-bore-inch 5IN

Diameter-od-inch 7.1875IN

Width-height-inch 1.5625IN

Equivalent FAG Tag No.K48290-48220_______________________________________________________________________06810 58.09.28.414.5 5 each

BRG CONE&CUP HM813844/HM813810 30.09.2018

Type TRB-TS

Series HM813800

Rows --





Amount in Words_______________________________________________________________________Style CUP AND CONE

Mat-cage --

Designation-rhp-number HM813844/HM813810

Type-of-bore-inch 66.675MM

Diameter-od-inch 127MM

Width-height-inch 36.512MM

BEARING CONE&CUP HM813844/HM813810

ROLLER TYPE

TAPER ROLLER BEARING

MAT CAGE: STEEL

TYPE OF BORE: 66.675MM

DIAMETER OD: 127MM

WIDTH:36.512MM

IN SET CONSISTING OF 1NO CONE& I NO CUP_______________________________________________________________________06820 58.09.28.651.5 6 each

BRG CONE&CUP 15250 / 15101 30.09.2018

Name TAPER ROLLER BEARING

Mat-cage STEEL

Designation-rhp-number 15250/15101_______________________________________________________________________06830 58.09.28.670.5 6 set.

BRG CUP&CONE K42381/42584 30.09.2018

Name : BEARING CUP & CONE

Series : K42381

Designation-rhp-number : K42381/42584

_______________________________________________________________________06840 58.09.28.742.5 3 each

BRG CONE&CUP 749A/TS742D 30.09.2018

Type TRB-TS

Series 745

Rows --

Style CUP & CONE

Mat-cage --

Designation-rhp-number 749A/742D

Type-of-bore-inch 3.250

Diameter-od-inch 6.125

Width-height-inch 4

BEARING CONE&CUP 749A/742D

TAPER ROLLER BEARING

MAT-CAGE: STEEL

TYPE OF BORE: 3.250INCH

DIAMETER OD: 6.125INCH

WIDTH: 4INCH





Amount in Words_______________________________________________________________________IN SET CONSISTING OF: 1 NO CONE

I NO CUP& SPACERXIS 749A

SPACER THICKNESS.325INCH & ID:3.25INCH

ASSEMBLY NO: 90070_______________________________________________________________________06850 58.09.28.795.7 10 each

BRG CONE&CUP 795/792 30.09.2018

Bearings;Roller


Mat-cage STEEL


Type-of-bore-inch 4-3/4

Diameter-od-inch 8-1/8

Equivalent FAG Tag No.K795-792_______________________________________________________________________06860 58.09.28.928.7 10 set

BRG CONE&CUP 9285/9220 30.09.2018


Bearings;Roller


Mat-cage STEEL


Type-of-bore-inch 3


Width-height-inch 2


BRG CONE&CUP 98788/98350 30.09.2018

Bearings;Roller


Mat-cage STEEL




Width-height-inch 2_______________________________________________________________________06880 58.09.28.984.7 3 each

BRG CONE&CUP 98789/98355 30.09.2018

Bearings;Roller


Mat-cage STEEL




Width-height-inch 4.5625_______________________________________________________________________






BRG CONE&CUP 12580/12520 30.09.2018

Bearings;Roller


Mat-cage STEEL




Width-height-inch 0.7874


BRG CONE&CUP 14139/14276 30.09.2018


Bearings;Roller


Mat-cage STEEL






BRG CONE&CUP LM48548/510/Q 30.09.2018

BRG CONE&CUP LM48548/510/Q

Bearings;Roller


Mat-cage STEEL

Designation-number LM48548/510/Q

Type-of-bore-inch 1.3750IN



Equivalent FAG Tag No.KLM48548-LM48510_______________________________________________________________________06920 58.10.80.474.7 10 each

BRG CONE&CUP 02474/02420 30.09.2018


Bearings;Roller


Mat-cage STEEL

Designation 02474/02420








Amount in Words_______________________________________________________________________Equivalent FAG Tag No.K02474-02420_______________________________________________________________________06930 58.10.80.497.7 9 each

BRG CONE&CUP 497/493 30.09.2018


Bearings;Roller


Mat-cage STEEL






BRG CONE&CUP 53176/53387 30.09.2018


Bearings;Roller


Mat-cage STEEL






BRG CONE&CUP 6559/6535 30.09.2018


Bearings;Roller


Mat-cage STEEL

Designation-number 6559C/6535





BRG CONE&CUP 6575/6535 30.09.2018


Bearings;Roller


Mat-cage STEEL







Amount in Words_______________________________________________________________________Diameter-od-inch 6.3750IN



BRG CONE&CUP 3578/3520 30.09.2018

Bearings;Roller


Mat-cage STEEL






BRG CONE&CUP 27690/27620 30.09.2018

Bearings;Roller


Mat-cage STEEL

Designation--number 27690/27620



Width-height-inch 1.000IN_______________________________________________________________________06990 58.10.85.274.7 5 each

BRG CONE&CUP 14116/14274 30.09.2018


Bearings;Roller


Mat-cage STEEL






BRG CONE&CUP 3580/3525 30.09.2018


Bearings;Roller


Mat-cage STEEL








Amount in Words_______________________________________________________________________Width-height-inch 1.1875IN


BRG ROLLER AXK1109+AS1109 45MM 65MM 4MM 30.09.2018

Name BEARING ROLLER

Designation-skf-number AXK1109+AS1109

Type-of-bore-mm 45

Diameter-od-mm 65


BRG ROLLR MTR 29322 E 110 MM 190MM 30.09.2018

Type spherical

Series SPHERICAL ROLLER BEARING

Rows 2

Design-spec Parallel Bore

Style

Mat-cage STEEL CAGE


Type-of-bore-mm 110

Diameter-od-mm 190

Width-height-mm 48

_______________________________________________________________________07030 58.11.30.324.7 3 each

BRG ROLLER 29324E 120MM 210MM 30.09.2018


Bearings;Roller

Series Spherical Roller Thrust Bearing

Mat-cage STEEL


Type-of-bore-mm 120

Diameter-od-mm 210

Width-height-mm 54

Equivalent FAG Tag No.29324 E1_______________________________________________________________________07040 58.11.30.328.7 3 each

BRG ROLLER 29328E 140 240MM 30.09.2018

BRG ROLLER 29328E 140 240MM

Bearings;Roller

Series Spherical Roller Thrust Bearing

Mat-cage STEEL


Type-of-bore-mm 140

Diameter-od-mm 240






Equivalent FAG Tag No.29328 E1_______________________________________________________________________07050 58.11.30.332.5 2 Piece

BRG ROLLR M 29332 E 160MM 270MM 30.09.2018

Type spherical

Series 29000

Rows single

Design-spec ISO 104

Style HEAVY TYPE



Type-of-bore-mm 160

Diameter-od-mm 270


BRG ROLLR M 29426 E 130MM 270MM 30.09.2018

Type spherical

Series 29000

Rows single

Design-spec ISO 104

Style heavy type



Type-of-bore-mm 130

Diameter-od-mm 270


BRG ROLLER THRUST 51113 65MM 90MM 18MM 30.09.2018

Name BEARING BALL THRUST 51113

Size ID 65MM; OD 90MM

THICKNESS 18MM_______________________________________________________________________07080 58.12.20.301.5 8 Piece

"PLUMMER BLOCK BEARRING,SKF SYJ 60 TF" 30.09.2018

"PLUMMER BLOCK BEARRING,SKF SYJ 60 TF"

SKF PLUMMBER BLOCK BEARING

SKF SYJ 60 TF (CONSISTING OF BEARING YAR 212-2F & HOUSING SYJ 512).

MFR : SKF BEARING INDIA

TAG NO : SKF SYJ 60TF

SR NO : 512

LOCATION : DRIVING UNIT; LPG CAROUSELS CONVEYORS

Equivalent FAG Tag No : UCP212_______________________________________________________________________






"BEARRING,SKF, FYJ 60 TF" 30.09.2018

"BEARRING,SKF, FYJ 60 TF"

SKF BEARING FYJ 60 TF

SKF FYJ 60 TF (CONSISTING OF BEARING YAR 212-2F & HOUSING SYJ 512).

FOR SKF SQUARE BLOCK BEARING


LOCATION : LPG BOTTLING PLANT

Equivalent FAG Tag No : RCJY60-N_______________________________________________________________________07100 58.12.20.350.5 1 Piece

BEARRING,SKF, FYJ 70 TF 30.09.2018

SKF BEARING FYJ 70 TF

SKF FYJ 70 TF (CONSISTING OF BEARING YAR 214-2F & HOUSING SYJ 514).

FOR SKF SQUARE BLOCK BEARING


LOCATION : LPG BOTTLING PLANT_______________________________________________________________________07110 58.12.20.606.7 5 each

BRG UNIT Y YET-206 30MM 62MM 30.09.2018

Bearing units

Type Y Bearing

Designation-skf-number YET-206

Type-of-bore 30

Diameter-od 62

Width-height 18_______________________________________________________________________07120 58.12.20.806.7 3 each

BRG UNIT HOUSING SY 506 M 30.09.2018

Type Plummer Block Two Bolt without bearing

Designation-skf-number SY 506 M

Width-height 18_______________________________________________________________________07130 58.12.90.420.5 4 Piece

SLEEVE,ADAPTOR W/LOCK/NUT/WASHER,H-2320 30.09.2018

ADAPTOR SLEEVE WITH LOCK NUT & WASHER H-2320

MOC : CARBON STEEL

DESIGNATION : H-2320

BORE BEARING : 100 MM

Diameter ID-sleeve : 90 mm

Diameter OD-Lock : 100 mm

Length Sleeve : 97 mm

TAG NO : RFU FD FAN 101 AND 102

LOCATION : RFU_______________________________________________________________________






BRG TAPERED ROLLER 30228J2 30.09.2018

BRG TAPERED ROLLER 30228J2

Bearings;Roller


Mat-cage STEEL

Designation--number 30228 J2

Type-of-bore-inch 140

Diameter-od-inch 250


Equivalent FAG Tag No.30228 A_______________________________________________________________________07150 58.60.19.066.5 5 each

BRG YAR 2062F 30.09.2018

Name BEARING YAR 2062F_______________________________________________________________________07160 58.60.19.067.5 3 each

BRG YAR 2082F 30.09.2018

Name YAR 2082F_______________________________________________________________________07170 58.60.19.068.5 3 each

BRG YAR 2102F 30.09.2018

Name BEARING YAR 2102F_______________________________________________________________________07180 58.60.19.069.5 3 each

BRG YAR 2142F 30.09.2018

Name YAR 2142F_______________________________________________________________________07190 58.72.97.028.5 1 set.

UPPER TAPER ROLLER BEARING 30.09.2018

UPPER TAPER ROLLER BEARING FOR FAN SHAFT

MAKE : TIMKEN BEARING

MODEL: 46790-46720TS

SPARES FOR GEAR BOX

TAG NO : 139CTF906A/B/C/D/E & ARU CT FAN

REMARKS : FOR 139CTF906A/B/C/D/E & ARU CT FAN

LOCATION : SWPH_______________________________________________________________________07200 58.72.97.029.5 1 set.

LOWER TAPER ROLLER BEARING 30.09.2018

LOWER ROLLER BEARING FOR FAN SHAFT


MODEL: 95500-95925TS

SPARES FOR GEAR BOX






Amount in Words_______________________________________________________________________REMARKS : FOR 139CTF906A/B/C/D/E & ARU CT FAN


INNER TAPER ROLLER BEARING 30.09.2018

INNER TAPER ROLLER BEARING FOR PINION SHAFT


MODEL: 98400-98788

SPARES FOR GEAR BOX


REMARKS : FOR 139CTF906A/B/C/D/E


OUTER TAPER ROLLER BEARING 30.09.2018

OUTER TAPER ROLLER BEARING FOR PINION SHAFT


MODEL : JH217249-JH217210

SPARES FOR GEAR BOX



LOCATION: SWPH_______________________________________________________________________07230 58.72.97.032.5 4 set.

UPPER TAPER ROLLER BRG,INTERSTAGE SHAFT 30.09.2018

UPPER TAPER ROLLER BEARING FOR INTERSTAGE SHAFT


MODEL: 98350-98788

SPARES FOR GEAR BOX




LOWER TAPER ROLLER BRG,INTERSTAGE SHAFT 30.09.2018

LOWER TAPER ROLLER BEARING FOR INTERSTAGE SHAFT


MODEL: 749A-742D

SPARES FOR GEAR BOX




ROLLER BEARING,HH221410D-HH221430 30.09.2018

TIMKEN TAPER ROLLBEARING





Amount in Words_______________________________________________________________________MAKE : TIMKEN BEARING

MODEL: HH221410D-HH221430

SPARES FOR GEAR BOX



LOCATION : SWPH_______________________________________________________________________07260 58.72.97.036.5 2 Piece

TAPER ROLLER BEARING;30226A 30.09.2018

TAPER ROLLER BEARING NO 30226A

SPARES FOR GEAR BOX

MODEL NO : SAB 250

TAG NO : AC 6

SR NO : WGH 28749 RH

DW NO : 703-00-7557

REMARKS : MAKE : FAG/EQUIVALENT 30226A_______________________________________________________________________07270 58.72.97.037.5 2 Piece

TAPER ROLLER BEARING;30317A 30.09.2018

TAPER ROLLER BEARING NO 30317A

SPARES FOR GEAR BOX

MODEL NO : SAB 250

TAG NO : AC 6

SR NO : WGH 28749 RH

DW NO : 703-00-7557

REMARKS : MAKE : FAG/EQUIVALENT 30226A_______________________________________________________________________07280 58.98.99.509.8 40 Piece

SYJ 1. 1/4 TF PLUMMER BLOCK BEARING 30.09.2018

SYJ 1.1/4 TF PLUMMER BLOCK BEARING.

PLUMMER BLOCK WITH DESCRIPTION SYJ 507M.

BEARING WITH DESCRIPTION YAR 207.

EQUIPMENT DETAILS: MOC ROTARY SKIMMERS

LOCATION: BPCL. MUMBAI REFINERY. MOC OIL CATCHER._______________________________________________________________________07290 58.99.99.130.8 1 Piece

ANGULAR CONTACT BEARING,QJM-4&1/2 30.09.2018

ANGULAR CONTACT BEARING,QJM-4&1/2

FOR JETTY PUMP NO.5

MAKE: RHP

LOCATION: JETTY PUMP HOUSE._______________________________________________________________________07300 58.99.99.462.8 1 Piece

ROLLAR BEARING,SKF,NU326 M 130MM 280MM 30.09.2018

ROLLAR BEARING NU326 M 130MM 280MM





Amount in Words_______________________________________________________________________MAKE: SKF

EQUIPMENT DETAILS: MOTOR MD-5

NOTE:-

MATERIAL IS REQUIRED WITH SKF INSPECTION REPORT

LOCATION: REFINERY, SALT WATER

_______________________________________________________________________07310 58.99.99.470.8 2 Piece

BEARING 182932SLC3 30.09.2018

BEARING 182932SLC3

MAKE: SKF OR EQUIVALENT

SPHERICAL ROLLER BEARING

FOR MAIN SHAFT OF BITUROX AGITATOR GEARBOX

EQUIPMENT DETAILS: BBU AGITATOR GEARBOX

LOCATION: BBU

_______________________________________________________________________07320 58.99.99.485.8 2 Piece

THRUST BALL BEARING 51134 30.09.2018

THRUST BALL BEARING 51134

EQUIPMENT DETAILS:-

TANK-115 INLET LINE MOV

LOCATION: P/H-1A

_______________________________________________________________________07330 58.99.99.502.8 1 set.

NU236 ECMA C3 ROLLER BEARING 30.09.2018

NU236 ECMA C3 ROLLER BEARING

MAKE: SKF OR EQUIVALANT

MATERIAL IS REQUIRED FOR S/D O/H OF WGC MOTOR AT SITE

EQUIPMENT DETAILS:

WGC MOTOR OF CCU

LOCATION: CCU

_______________________________________________________________________07340 58.99.99.538.8 1 Number

BEARING 16038C3 30.09.2018

BEARING 16038C3

MAKE: FAG/SKF

BEARING 16038C3 FOR 2MW AVK MAKE DG SET GENERATOR

EQUIPMENT DETAILS: RMP DG GENERATOR

LOCATION: SWPH DG HOUSE._______________________________________________________________________07350 58.99.99.539.8 2 Number

BEARING NU1038M1 30.09.2018

BEARING NU1038M1





Amount in Words_______________________________________________________________________ MAKE: FAG/SKF

BEARING NU1038M1 FOR 2MW AVK MAKE DG SET GENERATOR

EQUIPMENT DETAILS: RMP DG GENERATOR

LOCATION: SWPH DG HOUSE._______________________________________________________________________



TERMS & CONDITIONS

Important Notice_______________________________________________________________________ Sr.No Description_______________________________________________________________________ 001 Quotation received after due date will not be entertained

002 Your quotation must specify exact amount or percentage discount,

GST, Charges, Transport, Packing & forwarding,

etc. as applicable.

003 In case you are unable to quote, kindly send the quotation with a

regret for our records. Non-receipt of a regret will adversely

affect your vendor rating.

004 No quotation will be accepted without your rubber stamp and

signature.

005 Your quotation must be strictly in enclosed envelope

indicating Collective RFQ No., RFQ No. and due date.

006 For all future correspondences please mention the vendor code

Collective RFQ Number & RFQ Number.



M/s ____________________________________________(Name of Company)

Offer No. _______________________________________(Bidder’s Ref.)

Contact Person Name & Mobile No. : ____________________________

E-mail ID : ___________________________

S No Commercial conditions description

Applicable for

Supply at BPCL-

Mumbai Refinery

Applicable for

Supply at BPCL-

Kochi Refinery

1.1 Freight charges in %, if applicable.

1.2 SGST in %

1.3 CGST in %

1.4 IGST in %

1.5 Invoicing / Billing Location (State)

SIGNATURE WITH SEAL:_______________________

ANNEXURE - 3

BHARAT PETROLEUM CORPORATION LIMITED

(CPO-R)

APPLICABLE CHARGES AND GST

SUB : ANNUAL RATE CONTRACT FOR SUPPLY OF BEARINGS FOR BPCL - MUMBAI REFINERY and BPCL - KOCHI REFINERY.


Notes :

1) Vendor shall only indicate the current applicable Goods and Service Tax (GST) for all the items in tender in

percentage, vendor shall indicate NIL against the same in relevant space provided.

I hereby confirm that above commercial conditions shall supersede the clauses if any repeated anywhere in

quotation.

VENDOR NAME : _______________________

2) If vendor has multiple Invoicing / Billing location (State), pl indicate with items Sr. Nos.

Page 1 of 1

SPECIAL PURCHASE CONDITIONS Page 1 of 15

Annexure-4



SPECIAL PURCHASE CONDITIONS

SUB : ANNUAL RATE CONTRACT FOR SUPPLY OF BEARINGS FOR BPCL-MUMBAI

REFINERY and BPCL-KOCHI REFINERY.


1.0 INTRODUCTION

1.1 e-Bids in 2 (two) parts are invited for the tender for “Annual Rate Contract for Supply of

Bearings for BPCL-Mumbai Refinery (MR) and BPCL-Kochi Refinery (KR)” for 1 (One) year

period, in complete accordance with tender documents and its attachments.

1.2 This is a Two Part Bid Tender, viz. Part-1 i.e. Techno-commercial un-price bid and Part-2 i.e.

Priced-Bid. The Bidders shall submit details/ documents required for each type of Bid, as

specified in the tender. Further, bids of only those vendors whose offers are found acceptable

in Part-1 shall be considered for Part-2 opening and for further evaluation. All documents/

Bids submitted shall be digitally signed and sealed for authentication.

1.3 BPCL reserves the right to finalize the tender based on the ‘Sealed Price Bid’ submitted by the

qualified Bidders OR by conducting ‘Reverse Auction’ (RA) with only qualified bidders. The

Bidders should submit their best prices in the ‘Priced bid’. However, it may be noted that in

case BPCL opts for ’RA’, the ‘Price Bid’ submitted by the Bidder shall not be opened. For

conducting the RA, the ‘Opening / Start bid price’ and subsequent ‘Decrement value’ shall be

specified by BPCL based on BPCL’s internal estimation process prior to RA. As a prerequisite,

all Bidders shall have to confirm their compliance with the ‘Business Rule Document governing

RA’ furnished in the tender.

1.4 To participate in tenders hosted by BPCL on e-procurement site, bidders are required to have

a digital certificate and to do “Enrollment” (Register on site) by creating one User Id on the

above site. All prospective bidders are requested to enroll onto BPCL e-tendering platform

https://bpcleproc.in/ maintained by M/s. e-Procurement Technologies Limited, BPCL

authorized Service Provider for e-tendering.

2.0 SPECIAL TERMS AND CONDITIONS

2.1 Bidders should be manufacturers of the category of Bearings mentioned in RFQ

Specification. BPCL do not require POLYAMIDE CAGE bearings. Please consider steel cage

only and quote accordingly

2.2 The offered bearings of specified No./description comply with all relevant technical standards.

The bearings of same No./description are interchangeable with that of different makes.

2.3 Bidders authorized dealer network cover all the Refineries and they can ensure quick delivery.

In case of emergency, the required bearing can be delivered within 24 hrs. through their

dealers. They can provide any after sales service required by BPCL. Specific inspection &


quality certification for each bearing can be offered by them prior to supply. They will facilitate

customer training, conditioning monitoring, failure analysis by their experts.

2.4 Bidders are requested to quote as per SKF Bearing code nos. only. Equivalent FAG code nos.

mentioned in the detailed description against these codes may be ignored.

2.5 For the items unit of measure is given as ‘Set’, 2 Pieces of Bearings shall be supplied. Bidders

are requested to take note of this and quote accordingly

2.6 Please note that tender enquiry is for entering into an Annual Rate Contract for a period of

1 Year from the date of award of Contracts.

2.7 The quantities shown is purely an estimated quantit ies. The actual off-take will depend upon

our requirement from time to time during the period of rate contract which may be more or

less than the quantity specified.

2.8 Purchase orders will be placed for the quantities actually required by us from time to time, on

the basis of contracted rates by our P&CS departments at Mumbai and Kochi, linking to the

Rate Contracts. Needless to say, this contract is without any firm commitment on quantities/

values.

2.9 The orders shall be released till last date of validity of the rate contract. Supplies shall be

effected for all the purchase orders placed during the contract period, at the contracted rates,

terms and conditions, even if the supply period extends beyond the contract period.

2.10 BPCL reserves the right to extend the contract period by 6 months and / or place orders for

an additional quantities / values of up to 30%.

2.11 Material found defective due to poor workmanship / not meeting the specification will be

rejected and shall be replaced free of cost by the supplier (Vendor).

2.12 Rates quoted shall remain firm till the execution of the contract period and no claims for price

escalation shall be entertained.

2.13 We reserve the right to discontinue calling for supplies and terminate the rate contract by

giving 30 days’ notice in advance without giving any reason for termination.

2.14 Items should be properly packed and sent, to avoid any damage to the consignment. Supplied

materials should be properly protected to avoid any transit damage.

Raw / Solid wood packaging material of imported items has to be appropriately treated and

marked as per International Standard of Phytosanitary Measures (ISPM-15") for material

originating from the contracting countries conforming to the International Plant Protection

Convention or the members of Food & Agriculture Organization. Material from non-

contracting parties would have to be accompanied by a phytosanitary certificate of the

treatment endorsed. The Custom Officer at Indian Port shall not release the material without

appropriate compliance of the above provisions w.e.f. 01.11.2004.

3.0 DEFINITIONS AND INTERPRETATIONS

3.1 Where any portion of the GPC is repugnant to or at variance with any provisions of the SPC

then, unless a different intention appears, the provisions of the SPC shall be deemed to govern

the provisions of the GPC and SPC provisions shall prevail to the extent of such repugnancy,

or variations exist.

3.2 In RFQ Documents unless otherwise stated specifically, the singular shall include the plural

and vice versa wherever the context so requires.


3.3 Notwithstanding the sub-division of the RFQ Documents into separate sections and volumes,

every part of each shall be deemed to be supplementary to and complementary of every other

part and shall be read with and into the Agreement so far as it may be practicable to do so.

3.4 All headings, subtitles and marginal notes to the clauses of the GPC, SPC or to the

Specifications or to any other part of RFQ Document are solely for the purpose of giving a

concise indication and not a summary of the contents thereof, and they shall never be deemed

to be part thereof or be used in the interpretation or construction thereof.

3.5 The terms fully capitalized and /or initial capital ized shall be interchangeable and shall have

the meaning as assigned to fully capitalized term or initial capitalized term.

3.6 In BIDDING documents at all such places where obligations are confined to Purchaser alone

such provision to read as ‘Purchaser’s obligation to the extent the context so means/ requires.

4.0 SUPPLIER’S SCOPE

4.1 Supplier’s scope shall include but not limited to ( a) manufacturing of Items as per tender

technical specifications; (b) Testing (c) Packing; and (d) Loading on truck/ trailer and

transportation up to site.

5.0 DURATION OF CONTRACT

5.1 One year from the date of issue of LOA / Contract.

Vendors who will not accept for One year contract period, their offers shall not be considered

for evaluation.

BPCL reserves the right to extend the contract by 6 months and / or place orders for an

additional quantities / values of up to 30%.

6.0 OFFER VALIDITY

6.1 Your offer should be valid for a period of 120 days from the final extended due date for

acceptance of Annual Rate Contract and for 1 year thereof for acceptance the orders.

BPCL reserves the right to accept or reject bids with lesser validity period not in line with BPCL

requirement.

7.0 APPLICABLE CHARGES AND GST

7.1 Bidders are requested to include their Packing and Forwarding charges in base rate and shall

quote applicable Freight and GST rate separately.

7.2 All statutory levies, if applicable is payable extra by BPCL. However, any increase / decrease in

statutory levies on the date of delivery during the scheduled delivery period on finished

materials will be on BPCL's account. If the material is not supplied within the scheduled

delivery period, then any increase on statutory levies will be on vendor's account.

7.3 The quoted base rate shall include all expenses towards all testing charges, PMI testing etc.

8.0 ANTI PROFITEERING CLAUSE:

8.1 If any new tax is introduced on sale of goods/services by VENDOR to OWNER in lieu of one or

more of the then existing taxes or as a new tax altogether and the rate and impact of the new

taxes is less than the rate and impact of existing tax or taxes which it replaces, VENDOR shall

pass on to OWNER the benefit thereof by of commensurate reduction in the amount payable


by the OWNER to VENDOR. If on the other hand, the rate of the new taxes is in excess than

the rate of the new taxes it replaces, the OWNER on satisfactory proof shall reimburse the

VENDOR the additional tax paid by the VENDOR as the result of the imposition of the new

taxes provided they are within the contractual completion date.

Explanation: For the purpose of above clause, impact means and includes the

addition/reduction of taxes suffered on inputs, input services & capital goods. Further, impact

of stranded taxes like CST on Interstate purchases, entry tax/octroi, etc (if applicable) also

needs to be considered.

The vendor shall take steps viz. uploading invoice in GSTR 1 , payment of the tax liability on

the said invoices and filing of Returns etc. and comply with all the requirements of applicable

laws including GST laws for the time being in force to enable the OWNER to avail tax credit/s

including input tax credit. Any loss or non-availability of input tax credit by the OWNER due

to non-compliance of applicable tax laws including but not limited to GST laws in force or

otherwise, on the part of VENDOR, an amount equivalent to any tax liability accruing to the

OWNER and/or to the extent of any loss accrued to the OWNER due to the non-availability of

input tax credit or any liability accrued to the OWNER shall either stand cancelled or deducted

from the payment due to the VENDOR or shall be reimbursed by the VENDOR as the case may

be till such default is either rectified or made good by the VENDOR and the OWNER is satisfied

that it is in a position to claim valid input tax credit within the time-lines as per applicable laws.

Any cost, liability, dues, penalty, fees, interest as the case may be which accrues to the OWNER

at any point of time on account of non-compliance of applicable tax laws or rules or

regulations thereof or otherwise due to default on the part of VENDOR shall be borne by the

VENDOR. An amount equivalent to such cost, liability, dues, penalty, fees, interest as the case

may be, shall be reimbursed by the VENDOR within 30 days. Any GST as may be applicable on

such recovery of amount shall also be borne by VENDOR and same shall be collected by the

OWNER.

9.0 FIRM PRICES

9.1 The quoted Prices shall remain firm and fixed for the entire duration of order and in all

respects and no escalation in prices on any account shall be admissible.

Non-acceptance of firm rates for entire completion of order period is liable for rejection.

10.0 EQUIVALENCY OF ITEMS/ TAG NUMBERS:-

10.1 The bidder can quote for items mentioned in our enquiry or their equivalent brand/

tag numbers. In such cases, equivalent tag numbers shall be mentioned in their

unpriced bids.

10.2 The bidder shall stand guarantee that the offered alternative to the existing Bearing

number provided in the list exactly matches with the existing specifications. Any

variation in this shall lead to rejection and cancellation of the contract for this

particular item.

11.0 PAYMENT

11.1 PAYMENT TERMS

100% payment within 30 days on receipt and acceptance of material at site and against

submission of Performance bank guarantee (PBG).


PBG shall be for 10% of the Contract value for the Performance guarantee period, upfront, or

for 10% value of each running bill valid for the performance guarantee period (i.e. 18 months

plus six months claim period).

Please note non-acceptance of submission PBG by vendor may lead to rejection of their offer.

No retention will be done for remaining 10% in lieu of non-submission of PBG.

11.2 GENERAL

11.2.1 All payments shall be released within 30 days of receipt of invoice and all requisite documents,

i.e. Material Test Certificates, packing slips etc.

11.2.2 Performance Guarantee bond for 10% of order value by way of Bank Guarantee in the

prescribed format from any Scheduled Indian Bank as per General Purchase Conditions (GPC)

and as per format of PBG provided shall be provided.

11.2.3 The PBG should be valid for a period of 24 months (18 months + 6 months claim lodging

period) shall be furnished.

11.2.4 In case, PBG is not provided by the Vendor, their offer is liable for rejection.

11.2.5 No initial advance payment along with order shall be made by BPCL against supplies. If a

supplier insists on the same, the offer shall be rejected.

11.2.6 BPCL has tied up with SBI for implementation of SFMS (Structured Financial Messaging

Service) Bank Guarantee Process and the salient features are as given below: Vendors have to

issue of SFMS Bank Guarantee for faster payments.

1) Vendors/ Contractors shall provide BPCL’s Bank Account No. & IFSC Code (Details given

below) to their Bank at the time of application for Bank Guarantee in favor of BPCL

2) Issuing Bank shall issue the Bank Guarantee & send SFMS message to BPCL Bank

confirming the Bank Guarantee as genuine

3) BPCL’s Bank (SBI) shall in turn send the said SFMS message to BPCL’s dedicated email

ID basis which BPEC shall consider the said Bank Guarantee as verified by Bank

4) Once the above process is completed, BPEC Team shall proceed with the release of

payment to vendors which is due against the said Bank Guarantee

Name of Bank: State Bank of India

Branch: CAG Branch, Mumbai

Account No: 11083980831

IFSC Code: SBIN0009995

12.0 DELIVERY SCHEDULE / COMPLETION PERIOD

12.1 Delivery Period : 03 weeks from the date of Call-off / Purchase Order whichever is earlier,

on FOT Site basis.

BPCL reserves the right to accept or reject bids with delivery period not in line with BPCL

requirement.

12.2 The receipt of the supplies against the call offs / Purchase Order at each location shall be

considered as Delivery date for calculation of Price reduction for delay.

12.3 These schedules are for normal consignments. However, supplier shall arrange to supply

emergency requirements, if any, as per our request on priority

12.4 Supplier’s prices should be door delivery basis. The ordered items are to be delivered to the

Refinery Warehouses at BPCL (Mahul, Mumbai, Maharashtra) and BPCL (Ambalamugal, Kochi,

Kerala) respectively.


12.5 Failing to meet the delivery schedule / completion period will be subject to Price Reduction

and/or curtailing other remedies available to the Purchaser as per RFQ Documents.

12.6 Bidder shall quote firm freight charges in percentage of basic price up to destination by road

on freight pre-paid door delivery basis.

Bidder has to quote freight charges in percentage only. Non-acceptability of freight charges in

percentage is not acceptable to BPCL and their offers stand commercially rejected.

12.7 Delay in receiving Invoices or failure in providing copies of dispatch documents and any

demurrage or wharfage or any loss resulting thereby shall be borne by the vendor.

12.8 Supply of part quantities will be acceptable only at the discretion of BPCL. In all other cases

vendor shall supply the entire quantity as per purchase order at a time.

13.0 PRICE REDUCTION SCHEDULE

13.1 Applicable as per attached GPC.

14.0 DESPATCH INSTRUCTIONS

14.1 Following dispatch documents are required to be submitted by the Supplier immediately after

shipment is made:

• Commercial Invoice

• LR/ Challan.

• Packing List

• Test Certificates

15.0 INSURANCE

15.1 Transit insurance shall be excluded from the supplier’s scope and, the same shall be

arranged by BPCL.

16.0 GENERAL PURCHASE CONDITIONS (GPC)

16.1 Attached General Purchase Conditions (GPC) shall be applicable for this contract.

17.0 GUARANTEE/ WARRANTY

17.1 The material shall be guaranteed for its design, good workmanship, size, capacity and

operation and satisfactory performance for a minimum period of 12 months from the date of

commissioning or 18 months from the date of dispatch whichever is earlier.

18.0 SUBMISSION OF OFFER

18.1 Vendors are requested to quote/fill the rate against each item in our e- procurement portal.

Vendor to fill applicable charges and GST at Mumbai Refinery and Kochi Refinery in the

e- procurement portal only.

18.2 Following documents are to be signed and stamped on each page and uploaded in the e-

tender portal:-

a. Signed, stamped and scanned copies of “QUOTED” or “NON QUOTED” and HSN No. of

each item.

b. Signed, stamped and scanned copies of supporting documents for meeting technical

specifications,


c. Signed, stamped and scanned copies of applicable charges and GST for the tender.

d. Signed, stamped and scanned copy of Acceptance sheet available at the end of Special

Purchase Conditions (SPC) and Business Rules Document for reverse auction,

e. Signed, stamped and scanned copy of all pages of General Purchase Conditions (GPC),

f. Duly filled, signed (all pages and 3 signatures on last page), stamped and scanned copy of

all pages of Integrity Pact document, Proforma for Declaration regarding Holiday Listing,

Commercial Questionnaire and Advisory on environmental criteria,

g. Technical & Commercial Deviations if any, to the tender documents, by giving reference

to the clause nos. in the Technical Deviation or Commercial Deviation.

18.3 Following documents are to be filled online in the e-tender portal:

Unit price in the price bid format in the e-procurement portal in Part-2 section i.e. Price bid

section.

18.4 Offer submitted by Telex/ Telegraph/ Fax/ e-Mail or Hard copy in sealed covers shall not be

accepted.

18.5 Offers with precondition on minimum contract value/call off value or non-acceptability of part

order are not acceptable to BPCL and their offers stand commercially rejected.

18.6 BPCL shall not be responsible for any delay in uploading of offer by the bidder in e-

Procurement portal.

18.7 Bidders to quote based on specifications.

19.0 EVALUATION CRITERIA

19.1 Evaluation will be on item-wise Lowest Quote basis. BPCL reserves the right to enter into

Annual Rate Contract with one party or with more than one party depending on the

evaluation, at its discretion. All the items in the Price bid format shall be considered for

evaluation. BPCL reserves the right to place order for all tendered items or part of the items.

However individual tendered quantity for the item shall be split only as per MSE policy. MSE

registered vendors should be manufacturer of the tendered items. Bidders who are

Authorised Suppliers or Authorised Agents or Traders of Manufacturer have to submit the

MSE- Entrepreneur Memorandum (EM-II) certificate of their Manufacturer of the tendered

items. The benefit of the MSE policy is not extended to the Traders/ Dealers.

19.2 Offers with precondition on minimum contract value/call off value or non acceptability of part

order are not acceptable and their offer stand commercially rejected.

20.0 TENDER OPENING

20.1 The deadline for bid submission is due date and time mentioned. The bids can be submitted

in the e-procurement website up to the tender due date and time.

20.2 Part-1 i.e. Techno-Commercial un-priced bid section submitted online for the subject tender

will be opened on e-tendering portal on tender due date and time. Part-2 i.e. Price Bid (if

reverse auction not done) submitted online for the subject tender will be opened on e-

tendering portal of only qualified bidders in Technical bids. Qualified bidders will be informed

about the date and time of opening of bids one day prior to bid opening date by e-mail. It may

be noted that Techno-Commercial un-priced bid and price bid opening can be witnessed by

bidders on e-tender site or in person at CPO-Refineries office. In case bidder wishes to

participate in person, they can inform BPCL the representative’s name, designation and

mobile phone number to enable BPCL to arrange for necessary visitor’s permission.


21.0 EARNEST MONEY DEPOSIT (EMD) :

Bidders are required to submit interest free EMD of Rs. 1,00,000.00 (Rs. One Lakh only).

Offers received without scanned copy of EMD document in the e-tender and EMD (Original

DD / Bank Guarantee) physically not received within 7 days after “Technical Bid” opening date

are liable to be rejected.

Exemption from paying Earnest Money Deposit.

� Units registered with National Small Industries Corporation (NSIC);

� Units falling under Micro & Small Enterprises (MSEs) category as defined under the

MSMED Act 2006.

The benefits of public procurement policy are extended to manufacturers

registered under this only and not extended to traders registered under this.

The above are subject to the fulfilling of under mentioned conditions:

a. Units should be registered with National Small Scale Industrial Corporation Limited

(NSIC) or with any of the Authorities specified under the Public Procurement Policy

for MSE’s. (DIC/KVIC/KVIB/Coir Board/NSIC/Directorate of Handicrafts and Handloom

or any other body specified by Ministry of MSME.)

b. The Unit should be registered for the item tendered.

c. The monetary limit, if any, indicated in the registration certificate should cover value

of items ordered.

d. Registration Certificate is valid for a period at least up to validity of the offer.

e. Self-attested copy of valid relevant registration certificate should be submitted in

support.

f. Registration with D G S & D will not entitle the bidder to claim above exemption.

Such bidders must upload appropriate proof along with their "Bid", to show that they are

eligible for the exemption from EMD (application for registration as NSIC / MSE or for renewal

will not be acceptable), failing which such bid wil l be treated as bid received without EMD and

liable to be rejected.

a. EMD can be paid in the form of Bank Draft drawn in favor of Bharat Petroleum Corporation

Limited & Payable at Mumbai.

b. EMD can also be paid by Bank Guarantee executed by any Scheduled Bank approved by

Reserve Bank of India as per pro-forma. The Bank Guarantee shall be valid for a period of six

months from the due date of the tender.

c. EMD can be paid also through electronic funds transfer to BPCL Bank Account proof of which

may be enclosed with the Intention to Bid submitted to the above address: BPCL Bank details

are as under:

1 Name of the Beneficiary Bharat Petroleum Corporation Ltd

2 Name of the Bank Standard Chartered Bank

3 Branch Code 222

4 Branch Address 90, M G. Road, Mumbai 4000 001

5 Branch Telephone 18002663666/18001033666

Fax no 022-267588081/26758822

6 NEFT IFSC Code SCBL0036001

7 Account Type 11 (Current )

8 Account No. 22205020115

9 RTGS IFSC Code -

10 MICR Code 400036002


d. Copy of the Bank Demand Draft, Bank Guarantee, Electronic Fund Transfer details and proof

of dispatch to be uploaded along with un-priced bid .

e. EMD of unsuccessful bidders shall be released after finalization of this tender. However, in

case of successful bidder the EMD shall be released on receipt of performance bank guarantee

(if applicable).

f. Forfeiture of EMD – A bidder who has submitted their bid shall not be permitted to alter /

amend or withdraw the bid, not-withstanding that the bid(s) has / have not yet been opened

/ finalized. A bidder who purports to alter / modify withdraw their offer after submission,

within the validity of the offer shall be liable to have their offer rejected and their EMD

forfeited / en-cashed.

The Earnest Money deposited by successful bidder shall be forfeited if the successful bidder

fails to honor the offer terms prior to ordering and Contractual terms after issuance of LOA /

PO.

22.0 PROFORMA FOR BANK GUARANTEE FOR EARNEST MONEY DEPOSIT

(This BG should be produced on non-judicial paper of appropriate value along with

PQ Bid.) To

Bharat Petroleum Corporation Ltd.

(CPO) Refineries

Mumbai Refinery, Mahul

MUMBAI 400074

Dear Sirs,

M/s. ______________________________________ have taken tender for the supply of

__________________

for Bharat Petroleum Corporation Ltd. The tender Conditions of Contract provide that the Bidder

shall pay a sum of Rs. ______

(Rupees___________________________________________________________________

__) as earnest money / initial / full security deposit in the form therein mentioned. The form of

payment of earnest money / security deposit includes guarantee executed by Schedule ‘A’

Bank, undertaking full responsibility to indemnify Bharat Petroleum Corporation Ltd. in case of

default.

The said______________________________________ have approached us and at their

request and in consideration of the premises

we__________________________________________________________

______________having our office at have agreed to give such guarantee as hereinafter

mentioned.

1. We ___________________________________________________________________

hereby undertake and agree with you that if default shall be made by M/s.

_____________________________________ in performing any of the terms and

conditions of the tender or in payment of any money payable to Bharat Petroleum

Corporation Ltd. We shall on demand pay to you in such matter as to you may direct the

said amount of Rupees_______________________________only or such portion thereof

not exceeding the said sum as you may from time to time require.

2. You will have the full liberty without reference to us and without effecting this guarantee

postpones for any time or from time to time the exercise of any of the powers and rights

conferred on you under the contract with the said_____________and to enforce or to for

bear from endorsing any power of rights or by reason of time being given to the said which

under law relating to the sureties would but for provision have the effect of releasing us.

3. Your right to recover the said sum of

Rs.__________________(Rupees__________________ ____________________) from

us in manner aforesaid will not be affected or suspended by reason of the fact that any

dispute or disputes have been raised by the said M/s.__________________


_________________and/or that any dispute or disputes are pending before any officer,

tribunal or court.

4. The guarantee herein contained shall not be determined or affected by the liquidation or

winding up, dissolution or change of constitution or insolvency of the said______________

____________________but shall in all respects and for all purposes be binding operative

units payment of all money due to you in respect of such liabilities is paid.

5. Our liability under this guarantee is restricted to

Rupees__________________________________ Our guarantees shall remain in force

until_____________________________________________ unless a suit or action to

enforce a claim under_________________________________________ Guarantee is

filed against us within six months from _____________________________(which is date

of expiry of guarantee) all our rights under the said guarantee shall be forfeited and shall

be relieved and discharged from all liabilities thereunder.

6. We have power to issue this guarantee in your favour under Memorandum and Articles of

Association and the undersigned has full power to do under the Power of Attorney dated

__________________granted to him by the Bank.

Yours faithfully

___________________________________________ Bank by its Constituted Attorney

Signature of a person duly authorised to sign on behalf of the bank.

23.0 POLICY FOR ‘HOLIDAY LISTING’ OF VENDORS IN BPCL:

23.1 The guidelines for holiday listing shall be applica ble as per web link given below:

https://bharatpetroleum.in/pdf/holidaylistingpolicyfinal.pdf

23.2 Bidders are required to confirm that the Holiday Listing Policy of BPCL is read and understood

by them.

23.3 Bidders serving holiday listing order issued (as on bid opening date) by BPCL, MOP&NG, EIL or

any other Oil PSEs would not get qualified in this tender.

23.4 A declaration to be submitted by bidder indicating that they are not on holiday list by BPCL /

MOP&NG / EIL or any other Oil PSEs as on due date of bid submission anywhere in the country.

Offers not accompanied with such declaration shall make the bidders liable for rejection. Any

wrong declaration in this context shall make the bidders liable for action under the Holiday

Listing procedure."

24.0 BID REJECTION CRITERIA:

24.1 The bidders shall adhere to the following provisions of the Bidding Document without taking

any deviations, failing which the Bid shall be considered to be non-responsive and are liable

to be rejected.

a. Defects liability period/ Guarantee Period.

b. Insufficient validity period.

c. Advance payment

d. Non submission of EMD as applicable

e. Non submission of Holiday Listing declaration

f. Non submission of Integrity Pact

g. Non acceptance of Performance Bank Guarantee

h. Any other rejection point specified elsewhere in the RFQ Documents.


25.0 INTEGRITY PACT (IP):

25.1 Proforma of Integrity Pact (IP) shall be returned by the Bidder/s along with the bid

documents, duly signed by the same signatory who is authorized to sign the bid

documents. All the pages of the Integrity Pact shall be duly signed, scanned and

uploaded along with other documents. Bidder's failure to upload the IP duly signed

along with bid documents shall result in the bid no t being considered for further

evaluation.

25.2 If the Bidder has been disqualified from the tender process prior to the award of the

contract in accordance with the provisions of the IP, BPCL shall be entitled to demand

and recover from Bidder Liquidated Damages amount by forfeiting the EMD/ Bid

Security as per provisions of IP.

25.3 If the contract has been terminated according to the provisions of the IP, or if BPCL is

entitled to terminate the contract according to the provisions of the IP, BPCL shall be

entitled to demand and recover from Contractor Liquidated Damages amount by

forfeiting the Security Deposit/Performance Bank Guarantee as per provisions of the

IP.

25.4 Bidders may raise disputes/complaints, if any, with the nominated Independent

External Monitor (IEM). The IEM's name, address & contact number is given below:

Shri. Shri. Brahm Dutt

Address : A-1/8 Safdarjung Enclave, New Delhi - 110 029.

E-mail : [email protected]

Mobile No. : 09871920282

26.0 POLICY FOR ‘HOLIDAY LISTING’ OF VENDORS IN BPCL:

26.1 The guidelines for holiday listing shall be applica ble as per web link given below:

https://bharatpetroleum.in/pdf/holidaylistingpolicyfinal.pdf

27.0 ARBITRATION CLAUSE:

GPC Arbitration clause is revised as below:

27.1 Option “1”.

“Law, Arbitration and Jurisdiction:

A. Negotiation and Conciliation:

The Parties shall endeavor to settle any dispute, difference, claim, counter-claim,

question or controversy between the Parties arising out of, in connection with or in

relation to this Agreement (“Dispute”) amicably between themselves, through

negotiation.

B. Reference to Arbitrator:

I. Any Dispute which the Parties are unable to resolve pursuant to Clause (A) within

thirty (30) days of the written notification by one Party to the other of the existence

of a Dispute shall be finally determined by arbitration in accordance with the

provisions of the Indian Arbitration and Conciliation Act, 1996 or any statutory

modification or re-enactment thereof.

II. All arbitration proceedings shall be conducted in English language. For the purpose

of such arbitration, both parties shall in good faith explore the possibility of

agreement on a Sole Arbitrator and in case of failure of such mutual agreement on

Sole Arbitrator, each party shall appoint one arbitrator and both appointed


arbitrator shall appoint third arbitrator. The Arbitral tribunal shall decide any such

dispute or claim strictly in accordance with the governing law specified below. The

arbitration shall be conducted in accordance with the provisions of Indian

Arbitration and Conciliation Act, 1996.

III. The venue of arbitration shall be Mumbai, India. The Award may include an award of

costs. Each Party shall bear their respective expenses in relation to the arbitration

and the eventual liability for the costs shall be in terms of the arbitral award.

IV. Notwithstanding of arbitration in respect of such dispute, the parties shall continue

to perform their respective obligations under this Agreement without prejudice to

the final determination/ Award in respect of such dispute.

C. Decision/ Award:

Any decision or Award of the Arbitrator appointed pursuant to this clause shall be final

and binding upon the parties.

D. Governing Laws/ Jurisdiction:

This Agreement shall be governed by and construed in accordance with Laws of India.

Each of the Parties hereto irrevocably submits to the sole and exclusive jurisdiction of the

Courts at Mumbai, India.”

In case 1st Option is not acceptable then:

27.2 Option “2”.

Any dispute arising out of or in connection with this contract, including any question

regarding its existence, validity or termination, shall be referred to and finally resolved by

arbitration under LCIA India Arbitration Rules, which Rules are deed to be incorporated by

reference into this clause.

The number of arbitrator shall be three.

The seat or arbitration shall be Mumbai, India.

The language to be used in the arbitration shall be English.

The governing law of the contract shall be the substantive law of India.

In case Option “1 & 2” are not acceptable then:

27.3 Option “3”.

Any dispute arising out of or in connection with this contract, including any question

regarding is existence, validity or termination, shall be referred to and finally resolved by

arbitration in Singapore in accordance with the Arbitration Rules of Singapore International

Arbitration Centre (“SIAC Rules”) for the time being in force, which rules are dimed to be

incorporated by reference in this clause.

The Tribunal shall consist of one arbitrator. The language of the arbitration shall be English.

This contract is governed by the Laws of India.

28.0 GENERAL POINTS:

28.1 BPCL reserves the right to extend due dates of tender, accept or reject any tender in part or

full, without assigning any reason whatsoever. BPCL also reserves its right not to accept the

lowest rates quoted by the bidders and also to give purchase preference to Public Enterprises,

as admissible under the existing policies of Government of India and to JVs/ Subsidiaries as

per BPCL guidelines.

28.2 BPCL reserves the right to reject any or all the tenders without assigning any reasons

whatsoever. Also BPCL reserves the absolute right to reject any or all the bids/tenders solely

based upon the past unsatisfactory performance by the bidder/bidders in BPCL, the opinion/

decision of BPCL regarding the same being final and conclusive.


28.3 Any effort by bidder or bidder’s agents, consultant or representative, howsoever described,

to influence the owner in any way concerning scrutiny/ consideration/ evaluation/

comparison of the bid or decision concerning award of contract shall entail rejection of the

bid.

28.4 Offers and all correspondence must be in English language only.

28.5 The material shall be packed in accordance with the rule in weatherproof, shipment worthy

eco-friendly packing, labeled and indicating clearly the description of item, hazardous nature

if any and precautions/care to be taken.

28.6 Any effort by bidder or bidder’s agents, consultant or representative, howsoever described,

to influence the Owner (BPCL) in any way concerning scrutiny / consideration / evaluation /

comparison of the bid or decision concerning award of contract shall entail rejection of the

bid.

28.7 Cutting / Correction: All entries in the tender must be written in permanent ink or typewritten

and there should not be any erasing or overwriting or corrections. Any unavoidable mistake

should be neatly cut and re-written without over-writing and use of correcting fluid. All

corrections should be duly signed by the Bidder.

28.8 The commercial terms offered by the bidder should be firm, clear and specific as the tenders

shall normally be finalized without seeking further clarification.

29.0 INFORMATION ON E-PROCUREMENT SYSTEM

The bidder is requested to download the tender from BPCL’s e-tendering website

https://bpcleproc.in and participate in the tender as per the instructions given above and herein,

on or before the due date and time of the tender. The tender available on the BPCL website can

be downloaded for reading purpose only. For participation in the tender, please fill up the tender

online on the e-tender system available on https://bpcleproc.in.

For registration on the e-tender site https://bpcleporc.in, bidder needs to download the

Instructions to Vendors document from the site and read it. They shall select “Register” and

complete the “Bidder Registration Form” by filling in all the information correctly. Kindly

remember the login id (e-mail), password entered therein. After completing this process, you will

receive a system generated e-mail, click on the link and complete balance Registration process.

As a pre-requisite for participation in the tender, bidders are required to obtain a valid Digital

Certificate of Class III and above as per Indian IT Act from the licensed Certifying Authorities

operating under the Root Certifying Authority of India (RCIA), Controller of Certifying Authorities

(CCA). The cost of obtaining the digital certificate shall be borne by the Bidder. In case any Bidder

so desires, he may contact our e-procurement service provider M/s. E Procurement Technologies

Limited, (Contact Number +91 9099090830, +91 7940016816) for obtaining the digital signature

certificate. Please note that generally, it takes 5 working days for obtaining a digital certificate

after the submission of all required documents / fees. Non availability of Digital Certificate shall

be considered as the bidder’s regret.

In case any corrigendum/amendment is issued after the submission of the bid by any bidders, then

such Bidders, who have submitted their bids, shall be intimated about the corrigendum /

amendment by a system-generated email. It shall be assumed that the information contained

therein has been taken into account by the Bidder. They have the choice of making changes in

their bid before the due date and time. No communication other than the above will be circulated

regarding Corrigendum / amendment, if any.


Bidders are required to submit their bid online on or before the due date and time of closing of

the tender as depicted in this document. Bidders shall have to log on to the website

(https://bpcleproc.in) for submitting their bid. The system time (Indian Standard Time - IST) that

will be displayed on e-Procurement web page shall be the time considered for determining the

expiry of due date and time of the tender and no other time shall be taken into cognizance. Bidders

are advised in their own interest to ensure that their bids are submitted in e-Procurement system

well before the closing date and time of bid. If the Bidder intends to change/revise the bid already

entered, he may do so any number of times till the due date and time of submission deadline.

However, no bid can be modified after the deadline for submission of bids. Once the entire process

of submission of online bid is complete, the Bidders are required to go to option ‘own bid view’

through dashboard and take the print of the envelope receipt as a proof of submitted bid.

Bids / Offers shall not be permitted in e-procurement system after the due date /time of tender.

Hence, no bid can be submitted after the due date and time of submission has elapsed.

No manual bids / offers along with electronic bids / offers shall be permitted.

Once the PQ Bid / Technical (or) un-priced bids are opened, bidders can see the list of Bidders who

have participated in the bid by logging on to the portal under their user ID and password and

clicking on “Reports” view. Subsequently, in case the price bids are opened in E Tendering

platform, Bidders can see the rates quoted by all the participating bidders using the same option.

No responsibility will be taken by BPCL and / or the e-procurement service provider for any delay

due to connectivity and availability of website. They shall not have any liability to Bidders for any

interruption or delay in access to the site irrespective of the cause. It is advisable that Bidders who

are not well conversant with e-tendering procedures, start filling up the tenders much before the

due date / time so that there is sufficient time available with him/her to acquaint with all the steps

and seek help if they so require. Even for those who are conversant with this type of e-tendering,

it is suggested to complete all the activities ahead of time. It should be noted that the individual

bid becomes viewable only after the opening of the bid on/after the due date and time. Please be

reassured that your bid will be viewable only to you and nobody else till the due date/ time of the

tender opening. The non availability of viewing before due date and time is true for e-tendering

service provider as well as BPCL officials.

BPCL and/or the e-procurement service provider shall not be responsible for any direct or indirect

loss or damages and or consequential damages, arising out of the bidding process including but

not limited to systems problems, inability to use the system, loss of electronic information etc.

In case of any clarification pertaining to e-procurement process, the Bidder may contact the

following agencies / personnel:

For system related queries: (our e-tendering service provider)

E-Procurement Technologies Limited (Procure Tiger)

Bidders Help Desk No. : +91 - (79) - 40270573

Email: [email protected] Contact: Mr. Satya, [email protected],

Telephone: +91 9004014223

Mr. Ajay Nandangi, [email protected],

Telephone: +91 22 25533128.

91 7208726400

*********************




SUB : ANNUAL RATE CONTRACT FOR SUPPLY OF BEARINGS FOR BPCL-MUMBAI

REFINERY and BPCL-KOCHI REFINERY.


ACCEPTANCE OF SPECIAL PURCHASE CONDITIONS (Annexure-4)

We, M/s __________________________________________________ having

office at __________________ read SPECIAL PURCHASE CONDITIONS and

confirm our acceptance to all the terms and conditions as mentioned herein in

the document except for deviations mentioned in the deviation form.

Date : Signature of Authorised Signatory

with Name & designation and Co. Seal.

Name & full address of the Firm :

M/s _______________________

Page 1 of 24

Annexure-5 Bharat Petroleum Corporation Limited

General Purchase Conditions

The following conditions shall be applicable for all procurement unless specifically

mentioned in the Special Purchase Conditions.

INDEX

1. DEFINITIONS

2. REFERENCE FOR DOCUMENTATION

3. RIGHT OF OWNER TO ACCEPT OR REJECT TENDER

4. LANGUAGE OF BID

5. PRICE

6. TAXES AND DUTIES

7. INSPECTION

8. SHIPPING

9. INDIAN AGENT COMMISSION

10. ORDER AWARD / EVALUATION CRITERIA

11. CONFIRMATION OF ORDER

12. PAYMENT TERMS

13. GUARANTEE/WARRANTY

14. PERFORMANCE BANK GUARANTEE

15. PACKING & MARKING

16. DELIVERY

17. UNLOADING AND STACKING

18. TRANSIT INSURANCE

19. VALIDITY OF OFFER

20. DELIVERY DATES AND PRICE REDUCTION SCHEDULE

21. RISK PURCHASE CLAUSE

22. FORCE MAJEURE CLAUSE

23. ARBITRATION CLAUSE

24. INTEGRITY PACT (IP)

25. RECOVERY OF SUMS DUE

26. CONFIDENTIALITY OF TECHNICAL INFORMATION

27. PATENTS & ROYALTIES

28. LIABILITY CLAUSE

29. COMPLIANCE OF REGULATIONS

30. REJECTION, REMOVAL OF REJECTED GOODS AND REPLACEMENT

31. NON-WAIVER

32. NEW & UNUSED MATERIAL

33. PURCHASE PREFERENCE CLAUSE

34. CANCELLATION

35. ANTI –COMPETITIVE AGREEMENTS/ABUSE OF DOMINANT POSITION

36. ASSIGNMENT

37. GOVERNING LAW

38. AMENDMENT

39. SPECIAL PURCHASE CONDITIONS

40 NOTICES

Page 2 of 24

Bharat Petroleum Corporation Limited

General Purchase Conditions

1. DEFINITIONS :

The following expressions used in these terms and conditions and in the purchase order

shall have the meaning indicated against each of these:

1.1. OWNER: Owner means Bharat Petroleum Corporation Limited (a Government of India

enterprise), a Company incorporated in India having its registered office at Bharat

Bhavan, 4 & 6 Currimbhoy Road, Ballard Estate, Mumbai 400038 and shall include its

successors and assigns (hereafter called BPCL as a short form).

1.2. VENDOR: Vendor means the person, firm or the Company / Corporation to whom this

Request for quotation (RFQ)/purchase order is issued and shall include its successors and

assigns.

1.3. INSPECTOR: Person/agency deputed by BPCL for carrying out inspection,

checking/testing of items ordered and for certifying the items conforming to the purchase

order specifications..

1.4. GOODS / MATERIALS: means any of the articles, materials, machinery, equipments,

supplies, drawing, data and other property and all services including but not limited to

design, delivery, installation, inspection, testing and commissioning specified or required

to complete the order.

1.5. SITE / LOCATION: means any Site where BHARAT PETROLEUM CORPORATION

LTD. desires to receive materials any where in India as mentioned in RFQ.

1.6. “RATE CONTRACT” means the agreement for supply of goods/ materials between

Owner and Vendor, for a fixed period of time (i.e till validity of Rate Contract, with no

commitment of contractual quantity) on mutually agreed terms and conditions. The actual

supply of goods/ materials shall take place only on issue of separate purchase orders for

required quantity as and when required by Owner.

1.7. “FIRM PROCUREMENT” means the agreement between the parties for mutually

agreed terms and conditions with commitment of Quantity Ordered.

Page 3 of 24

2. REFERENCE FOR DOCUMENTATION :

2.1. The number and date of Collective Request for Quotation (CRFQ) must appear on all

correspondence before finalization of Rate Contract / Purchase Order.

2.2. After finalization of Contract / Purchase Order: The number and date of Rate Contract /

Purchase Order must appear on all correspondence, drawings, invoices, dispatch advices,

(including shipping documents if applicable) packing list and on any documents or papers

connected with this order.

2.3. In the case of imports, the relevant particulars of the import Licence shall be duly indicated

in the invoice and shipping documents as well as on the packages or consignments.

3. RIGHT OF OWNER TO ACCEPT OR REJECT TENDER :

The right to accept the tender will rest with the Owner.

4. LANGUAGE:

The Bid and all supporting documentation and all correspondence whatsoever exchanged

by Vendor and Owner, shall be in English language only.

5. Price :

Unless otherwise agreed to the terms of the RFQ, price shall be :

Firm and no escalation will be entertained on any ground, except on the ground of

statutory levies applicable on the tendered items.

6. TAXES AND DUTIES :

All vendors shall have VAT / CST/GST/Service tax registration in the concerned State

and vendor shall quote their TIN number in the quotation.

6.1. EXCISE DUTY :

6.1.1. Excise duty extra as applicable at the time of delivery within scheduled delivery period

will be payable by BPCL against documentary evidence. Vendor shall mention in their

offer, the percentage of excise duty applicable at present. Any upward variation in excise

duty rates, beyond the contractual delivery period, shall be to vendor’s account.

6.1.2. In case Excise Duty is not applicable at present : Excise duty due to change in turn over is

not payable. If applicable in future, the same will be borne by vendor.

6.1.3. Owner shall take CENVAT Credit on the material supplied for both excise duty and cess

component and accordingly Excise duty / Cess should be quoted separately wherever

applicable.

Vendor shall ask the transporter of the goods to hand over the copy of excise invoice

(transporter’s copy) at the time of delivery of goods at owner’s site.

Page 4 of 24

6.2. SALES TAX / VAT/GST :

6.2.1. Sales Tax as applicable at the time of delivery within scheduled delivery period will be

payable by BPCL. Vendor shall give details of local sales tax and/oror central sales tax

currently applicable in their offer. The rates applicable for “CST without form C”, “CST

with form C" and “VAT” shall be clearly indicated.

6.2.2. Input VAT Credit may be claimed by BPCL, wherever applicable. Vendor shall submit

the TAX invoice.

6.3 Service tax :

All vendors shall have service tax registration wherever applicable. BPCL may also

claim CENVAT Credit on service tax. The vendor should quote service tax separately, if

applicable. Vendor shall submit the TAX invoice. Vendor is required to furnish serially

numbered and signed invoice / bill / challan containing the following details:

a) Name, address and registration number of the service provider

b) Name and address of person receiving taxable service

c) Description, classification and value of taxable service provided

d) Service Tax Payable

6.4 FREIGHT AND OCTROI :

6.4.1 Freight: Firm freight charges to be quoted as indicated in the Tender documents. Freight

shall be payable after receipt of the Material(s) at the site, unless otherwise specified.

6.4.2. Octroi and entry taxes, if any, shall be invoiced separately and shall be re-imbursed by

BPCL at actuals after receipt of the Material(s) at the Site against the submission of

original documentary evidence for proof of payment of the related octroi and entry taxes,

as the case may be.

6.5. NEW STATUTORY LEVIES :

All new statutory levies leviable on sale of finished goods to owner , if applicable are

payable extra by BPCL against documentary proof, within the contractual delivery

period.

6.6 Variation in Taxes/Duties

Any increase/decrease in all the above mentioned statutory levies on the date of delivery

during the scheduled delivery period on finished materials will be on BPCL's account.

Any upward variation in statutory levies after contractual delivery date shall be to

vendor’s account.

Page 5 of 24

7. INSPECTION :

7.1. Materials shall be inspected by BPCL approved third party inspection agency if

applicable before dispatch of materials. However, arranging and providing inspection

facilities is entirely vendor’s responsibility and in no way shall affect the delivery

schedule.

7.2. Scope of Inspection shall be as per RFQ. Our registered third party inspection agencies

are SGS/GLISPL/IRS/DNV/LRIS/EIL/TATA Projects/PDIL/ULIPL/RITES

LTD/ITSIPL as amended time to time unless otherwise specified in the Special Purchase

Conditions.

7.3. Unless otherwise specified, the inspection shall be carried out as per the relevant

standards/scope of inspection provided alongwith the Tender Enquiry/Purchase Order.

7.4. BPCL may, at its own expense, have its representative(s) witness any test or inspection.

In order to enable BPCL’s representative(s) to witness the tests/inspections. BPCL will

advise the Vendor in advance whether it intends to have its representative(s) be present at

any of the inspections.

7.5. Even if the inspection and tests are fully carried out, the Vendor shall not be absolved

from its responsibilities to ensure that the Material(s), raw materials, components and

other inputs are supplied strictly to conform and comply with all the requirements of the

Contract at all stages, whether during manufacture and fabrication, or at the time of

Delivery as on arrival at site and after its erection or start up or consumption, and during

the defect liability period. The inspections and tests are merely intended to prima-facie

satisfy BPCL that the Material(s) and the parts and components comply with the

requirements of the Contract. The Vendor’s responsibility shall also not be anywise

reduced or discharged because BPCL or BPCL’s representative(s) or Inspector(s) shall

have examined, commented on the Vendor’s drawings or specifications or shall have

witnessed the tests or required any chemical or physical or other tests or shall have

stamped or approved or certified any Material(s).

7.6. Although material approved by the Inspector(s), if on testing and inspection after receipt

of the Material(s) at the location, any Material(s) are found not to be in strict conformity

with the contractual requirements or specifications, BPCL shall have the right to reject

the same and hold the Vendor liable for non-performance of the Contract.

8. SHIPPING :

8.1 SEA SHIPMENT :

All shipment of materials shall be made by first class direct vessels, through the

chartering wing, Ministry of Surface Transport as per procedure detailed hereunder. The

Foreign Supplier shall arrange with Vessels Owners or Forwarding Agents for proper

storage of the entire Cargo intended for the project in a specific manner so as to faciliate

and to avoid any over carriage at the port of discharge. All shipment shall be under deck

unless carriage on deck is unavoidable.

The bills of lading should be made out in favour of `Bharat Petroleum Corporation Ltd..

or order'.

Page 6 of 24

All columns in the body of the Bill of Lading namely marks and nos., material

description, weight particulars etc., should be uniform and accurate and such statements

should be uniform in all the shipping documents. The freight particulars should mention

the basis of freight tonnage, heavy lift charges, if any, surcharge, discount etc. clearly and

separately. The net total freight payable shall be shown at the bottom.

SHIPPING DOCUMENTS :

All documents viz. Bill of Lading, invoices, packing list, freight memos, country of

origin certificates, test certificate, drawings and catalogues should be in English

language.

In addition of the bill of lading which should be obtained in three stamped original plus

as many copies as required, invoices, packing list, freight memos,(if the freight

particulars are not shown in the bills of lading), country of origin certificate, test /

composition certificate, shall be made out against each shipment in as many number of

copies as shown below.

The bill of lading, invoice and packing list specifically shall show uniformly the mark

and numbers, contents case wise, country of origin, consignees name, port of destination

and all other particulars as indicated under clause 2. The invoice shall show the unit

rates and net total F.O.B. prices. Items packed separately should also be invoiced and the

value shown accordingly. Packing list must show apart from other particulars actual

contents in each case, net and gross weights and dimensions, and the total number of

packages. All documents should be duly signed by the Vendor's authorised

representatives.

In the case of FOB orders, Shipping arrangements shall be made by the Chartering Wing

Of the Ministry of Surface Transport, New Delhi through their respective forwarding

agents. The names and addresses of forwarding agents shall be as per Special Purchase

Conditions. Supplier shall furnish to the respective agents the full details of consignments

such as outside dimension, weights (both gross and net) No of packages, technical

description and drawings, name of supplier, ports of loading, etc. 6 weeks notice shall be

given by the supplier to enable the concerned agency to arrange shipping space.

The bill of lading shall indicate the following :

Shipper : Goverment of India

Consignee : Bharat Petroleum Corporation Ltd.

In case of supplies from USA, Export Licences, if any required from the American

Authorities shall be Obtained by the U.S. Suppliers. If need be assistance for obtaining

such export licences would be available from India Supply Mission at Washington.

8.2 AIRSHIPMENT :

In case of Airshipment, the materials shall be shipped through freight consolidator

(approved by us). The airway bill shall be made out in favour of BHARAT

PETROLEUM CORPORATION LTD.

Page 7 of 24

TRANSMISSION OF SHIPPING DOCUMENTS :

Foreign Supplier shall obtain the shipping documents in seven complete sets including

three original stamped copies of the Bill of Lading as quickly as possible after the

shipment is made, and airmail as shown below so that they are received at least three

weeks before the Vessels arrival. Foreign Supplier shall be fully responsible or any delay

and / or demurrage in clearance of the consignment at the port due to delay in

transmittal of the shipping documents.

If in terms of letter or otherwise, the complete original set of documents are required to

be sent to BPCL through Bank the distribution indicated below will confine to copies of

documents only minus originals.

Documents BPCL (Mumbai)

Bill of Lading 4 (including 1 original)

Invoice 4

Packing List 4

Freight Memo 4

Country of Origin Certificate 4

Third party inspection certificate 4

Drawing 4

Catalogue 4

Invoice of Third Party 4

for inspection charges whenever applicable.

9. INDIAN AGENT COMMISSION :

Any offer through Indian agents will be considered only after authorization mentioning

them as Indian agents, is received from Vendor. Indian agents commission if applicable

will be payable only in Indian currency. Indian agents should be registered with

Directorate General of Supplies and Disposals, Government of India and agency

commission will be payable only after registration with DGS&D, New Delhi.

10. ORDER AWARD / EVALUATION CRITERIA :

Unless otherwise specified, Order award criteria will be on lowest quote landed price

basis. Landed price will be summation of Basic Price, Packing & Forwarding Charges,

Excise Duty, Sales Tax, Freight, Inspection, Octroi, Supervision of Installation &

Commissioning and other taxes & levies, loading etc, if any, reduced by cenvat/vat credit

as applicable.

11. CONFIRMATION OF ORDER :

The vendor shall acknowledge the receipt of the purchase order within 10 days of mailing

the same. The vendor shall sign, stamp the acknowledgement copy of the purchase order

and return the same to BPCL.

Page 8 of 24

12. PAYMENT TERMS :

12.1. Unless otherwise specified, 100% payment shall be made within 30 days from date of

receipt and acceptance of materials at Site against submission of Peformance Bank

Guarantee (PBG) for 10% of basic order value if PBG is applicable for the tender.

12.2. In the case of imports, payment will be made on submission of original documents

directly to Owner (Telegraphic Transfer-TT) or through Bank (Cash against documents-

CAD) or through irrevocable Letter of Credit.

12.3. Unless otherwise mentioned, the specified documents (All documents listed below (one

original and two copies)) should be submitted to originator of P.O. (the name and contact

details of whom are given in PO) and payments for despatches will be made by the

originator of Purchase Order :

a) Invoice

b) Excise invoice

c) The Lorry Receipt of the consignment

d) Packing list for the consignment

e) Third Party Inspector’s Certificate covering the invoiced Material(s)/ Release

Note, wherever applicable

f) Manufacturers Test/Composition Certificate, wherever applicable

g) Drawing(s)/Catalogue(s) covering the Material(s) , wherever applicable

h) Guarantee/Warranty Certificate(s), wherever applicable.

i) Original Receipt for Octroi/other statutory levies as applicable.

j) Performance Bank Guarantee as applicable.

13. GUARANTEE/WARRANTY :

13.1. Materials shall be guaranteed against manufacturing defects, materials, workmanship and

design for a period of 12 months from the date of commissioning or 18 months from the

date of dispatch whichever is earlier. Warranty for replacement of material / accessories

should be provided free of charges at our premises. The above guarantee/warranty will

be without prejudice to the certificate of inspection or material receipt note issued by us

in respect of the materials.

13.2. All the materials including components and sub contracted items should be guaranteed by

the vendor within the warranty period mentioned above. In the event of any defect in the

material, the vendor will replace / repair the material at BPCL’s concerned location at

vendor’s risk and cost on due notice.

13.3. In case, vendor does not replace / repair the material on due notice, rejected material will

be sent to the vendor on “Freight to pay” basis for free replacement. Material after

rectification of defects shall be dispatched by the vendor on “Freight Paid” basis.

Alternatively, BPCL reserves the right to have the material repaired / replaced at the

locations concerned, at the vendor’s risk, cost and responsibility.

13.4. The Vendor shall provide similar warrantee on the parts, components, fittings,

accessories etc. so repaired and / or replaced.

Page 9 of 24

14. PERFORMANCE BANK GUARANTEE :

14.1. Vendor will have to provide Performance Bank Guarantee for 10% of the basic value of

purchase order unless otherwise specified. This bank guarantee shall be valid (shall

remain in force) for guarantee period (as mentioned in the guarantee clause), with an

invocation period of six months thereafter. In the case of Indigenous vendors, the

Performance Bank Guarantee shall be given on a non-judicial stamp paper of appropriate

value (currently Rs 100). PBG format is as per Annexure I.

In case, PBG is not provided by the Vendor, 10% of the basic value shall be retained in

lieu of PBG, till the expiry of guarantee and claim period.

In the case of imports, the Supplier shall furnish the Performance Bank Guarantee (as per

Annexure I) through the following :

a) Branches of Indian scheduled banks operating in their Country.

b) Foreign bank operating in their Country which is counter guaranteed by branches of

Indian scheduled banks operating in their Country/India.

c) Indian branches of foreign banks.

d) Foreign bank operating in their Country counter guaranteed by their Indian branch

However, in respect of c) and d) above, the Indian branch of foreign banks should be

recognized as scheduled bank by Reserve Bank of India.

14.2. If Vendor wants to submit the PBG at Contract level to avoid multiple number of PBG

(i.e. PBG issued against every purchase/call off order) then the validity of PBG will be

calculated as mentioned below :

14.2.1. Validity of PBG = Rate Contract Issue Date (Start Date of Rate Contract) + Rate

Contract Period (validity of Rate Contract) + Contractual Delivery Period of material +

Contractual Guarantee period + 6 month (for invocation / Claim).

15. PACKING & MARKING :

15.1 PACKING :

15.1.1 Packing shall withstand the hazards normally encountered with the means of transport

for the goods of this purchase order including loading and unloading operation both by

crane and by pushing off.

In the case of imports, all equipments / materials shall be suitably packed in weather

proof, seaworthy packing for ocean transport under tropical conditions and for rail or

road or other appropriate transport in India. The packing shall be strong and efficient

enough to ensure safe preservance upto the final point of destination.

Raw/Solid wood packaging material of imported items has to be appropriately treated &

marked as per International Standard of Phytosanitary Measures (ISPM-15") for material

originating from the contracting countries to the International Plant Protection

Convention or the members of Food & Agriculture Organization. Material from non-

contracting parties would have to be accompanied by a phytosanitary certificate of the

Page 10 of 24

treatment endorsed. The Custom Officer at Indian Port shall not release the material

without appropriate compliance of the above provisions w.e.f. 01.11.2004.

15.1.2 The packing specification incorporated herein are supplementary to the internal and

external packing methods and standards as per current general rules of J.R.A. Good Tariff

Part-I. All packaging shall be done in such a manner as to reduce volume as much as

possible.

15.1.3 Fragile articles should be packed with special packing materials depending on the type of

Materials and the packing shall bear the words "HANDLE WITH CARE GLASS

FRAGILE, DON'T ROLL THIS END UP. THIS END DOWN," to be indicated by

arrow.

15.1.4 Chemicals in powder form, catalyst, refractories and like materials etc. shall be packed in

drums, cans and tins only. However, Catalyst may be supplied in Jumbo bags.

15.1.5 The hazardous materials shall be packed in accordance with the applicable rules,

regulations and tariff of all cognizant Government Authorities and other Governing

bodies. It shall be the responsibility of the seller of hazardous materials to designate the

material as hazardous and to identify each material by its proper commodity name and its

hazardous material class code.

15.1.6 All package requiring handling by crane should have sufficient space at appropriate place

to put sling of suitable dia (strength). Iron/Steel angle should be provided at the place

where sling marking are made to avoid damage to package/ equipment while lifting.

15.1.7 Item shipped in bundles must be securely tied with steel wire or strapping. Steel

reinforcing rods, bars, pipes, structural members etc. shall be bundled in uniform lengths

and the weight shall be within the breaking strength of the securing wire or strapping.

In the case of imports, for bundles the shipping marks shall be embossed on metal or

similar tag and wired securely on each end.

15.1.8 All delicate surface on equipment/materials should be carefully protected and printed

with protective paint/compound and wrapped to prevent rusting and damage.

15.1.9 All mechanical and electrical equipment and other heavy articles shall be securely

fastened to the case bottom and shall be blocked and braced to avoid any

displacement/shifting during transit.

15.1.10 Attachments and spare parts of equipment and all small pieces shall be packed separately

in wooden cases with adequate protection inside the case and wherever possible should

be sent along with the main equipment. Each item shall be suitably tagged with

identification of main equipment, item denomination and reference number of respective

assembly drawing. Each item of steel structure and furnaces shall be identified with two

erection markings with minimum lettering height of 15mm. Such markings will be

followed by the collection numbers in indelible ink/paint. A copy of the packing list shall

accompany the materials in each package.

15.1.11 All protrusions shall be suitably protected by providing a cover comprising of tightly

bolted wooden disc on the flanges. All nozzles, holes and openings and also all delicate

Page 11 of 24

surfaces shall be carefully protected against damage and bad weather. All manufactured

surfaces shall be painted with rust proof paint.

In the case of imports, for bulk uniform material when packed in several cases,

progressive serial numbers shall be indicated on each case.

15.1.12 Wherever required, equipment/materials instruments shall be enveloped in polythene

bags containing silicagel or similar dehydrating compound.

15.1.13 Pipes shall be packed as under:

a. Upto 50mm NB in wooden cases/crates.

b. Above 50mm NB and upto 100mm NB in bundles and should be strapped at minimum

three places.

c. Above 100mm NB in loose.

15.1.14 Pipes and tubes of stainless steel, copper etc. shall be packed in wooden cases

irrespective of their sizes.

15.1.15 Pipes with threaded or flanged ends shall be protected with suitable caps covers, before

packing.

In the case of imports, all pipes and sheets shall be marked with strips bearing

progressive no.

15.1.16 Detailed packing list in waterproof envelope shall be inserted in the package together

with equipment/materials. One copy of the detailed packing list shall be fastened outside

of the package in waterproof envelope and covered by metal cover.

15.1.17 The supplier shall be held liable for all damages or breakages to the goods due to the

defective or insufficient packing as well as for corrosion due to insufficient protection.

15.1.18 Packaged equipment or materials showing damage defects or shortages resulting from

improper packaging materials or packing procedures or having concealed damages or

shortages, at the time of unpacking shall be to the supplier’s account.

All packages which require special handling and transport should have their Centres of

Gravity and the points at which they may be slung or gripped clearly indicated and

marked “ATTENTION SPECIAL LOAD HANDLE WITH CARE” both in

English/Hindi Languages.

In the case of imports, a distinct colour splash in say red black around each package crate

/ bundle shall be given for identification. 15.1.19 Along with the packed material, supplier should attach material list, manuals/instructions

and also the Inspection certificate/release note, wherever applicable.

Page 12 of 24

15.2. MARKING :

The following details to be written on the side face of packing:

a) Purchase Order Number

b) Vendor Name

c) Batch no with Manufacturing date

d) Procedure (in brief) for handling

e) Date of dispatch etc.

15.3 Imported items :

On three sides of the packages, the following marks shall appear, clearly visible, with

indelible paint and on Vendor's care and expenses.


(With detailed address as given in Special Purchase Conditions)

From :

To : Bharat Petroleum Corpn.Ltd.

(With detailed address as given in Special Purchase Conditions)

Order no. Rev. no.

Item :

Equipment Nomenclature :

Net weight : Kgs.

Gross weight : Kgs.

Case No. of Total cases :

Dimensions :

Import Licence No.

NOTE :

Marking shall be bold - minimum letter height 5 cm. For every order and every

shipment, packages must be marked with serial progressive numbering.

Top heavy containers shall be so marked either Top Heavy or Heavy Ends.

When packing material is clean and light coloured, a dark black stencil paint shall be

acceptable. However, where packaging material is soiled or dark, a coat of flat zinc

white paint shall be applied and allowed to dry before applying the specific markings.

Page 13 of 24

In case of large equipments like vessels, heat exchangers, etc. the envelope containing the

documents shall be fastened inside a shell connection, with an identifying arrow sign

"documents" using indelible paint.

16. DELIVERY :

16.1. Unless otherwise mentioned, Vendor is requested to quote their best delivery schedule

from the date of receipt of Purchase order.

16.2. Time being the essence of this contract, the delivery mentioned in the purchase order

shall be strictly adhered to and no variation shall be permitted except with prior

authorization in writing from the Owner. Goods should be delivered, securely packed and

in good order and condition, at the place of delivery and within the time specified in the

purchase order for their delivery.

16.3. The contractual delivery period is inclusive of all the lead time for engineering /

procurement of raw material, the manufacturing, inspection / testing, packing,

transportation or any other activity whatsoever required to be accomplished for effecting

the delivery at the required delivery point.

16.4. Unless otherwise specified, Material(s) shall not be despatched without prior inspection

and/or testing and Release Order/Material(s) Acceptance Certificate issued by the

Inspector(s).

16.5. BPCL shall have the right to advise any change in despatch point or destination in respect

of any Material(s). Any extra expenditure incurred by the Vendor on this account

supported by satisfactory documentary evidence, will be reimbursed to the Vendor by

BPCL.

17. UNLOADING AND STACKING :

Unloading and stacking will be arranged by BPCL. The Vendor shall send BPCL

information of the proposed consignment well in advance by telegram/fax/e-mail/courier

to enable BPCL to take necessary action.

18. TRANSIT INSURANCE :

Unless otherwise mentioned,

18.1. Transit Insurance shall be covered by BPCL against its Mega Package Policy.

18.2 In the case of imports, insurance against all marine and transit risk shall be covered under

the Owner's marine policy. However, the Vendor shall ensure that in effecting

shipments clear bill of lading are obtained and the carrier's responsibility is fully retained

on the Carriers so that the consignee's interests are fully secured and are in no way

jeopardized.

Page 14 of 24

18.2. The Vendor shall send BPCL information of the proposed consignment well in advance

by telegram/fax/e-mail/courier to enable BPCL to take necessary action for the transit

insurance of the consignment. Any failure by the Vendor to do so shall place the

consignment at the Vendor’s risk.

18.3. In the case of imports, as soon as any shipment is made, the Foreign Supplier shall send

advance information by way of Telex message to Bharat Petroleum Corporation Ltd.,

(with detailed address as given in Special Purchase Conditions) giving particulars of the

shipments, vessels name, port of shipment, bill of lading number and date, total FOB and

freight value.

19 VALIDITY OF OFFER:

The rates quoted against this tender shall be valid for a period of 90 Days from the date

of opening of the tender unless otherwise specified in the Special Purchase Conditions.

20. DELIVERY DATES AND PRICE REDUCTION SCHEDULE :

20.1. The time and date of Delivery of Material(s) as stipulated in the Contract shall be adhered

to on the clear understanding that the Price(s) of the Material(s) has/have been fixed with

reference to the said Delivery date(s).

20.2. If any delay is anticipated by the Vendor in the delivery of the Material(s) or any of them

beyond the stipulated date(s) of Delivery, the Vendor shall forthwith inform BPCL in

writing of such anticipated delay and of the steps being taken by the Vendor to remove or

reduce the anticipated delay, and shall promptly keep BPCL informed of all subsequent

developments.

20.3. The delivery period quoted must be realistic & specific. The inability of successful

Vendors to execute orders in accordance with the agreed delivery schedule will entitle

BPCL, at its options, to :

20.3.1. Accept delayed delivery at prices reduced by a sum equivalent to half percent (0.5%) of

the basic value of any goods not delivered for every week of delay or part thereof, limited

to a maximum of 5% of the total basic order value. LR date will be considered as delivery

completion date for calculation of price reduction in the case of ex works contract. Date

of receipt of materials at owners premises shall be considered for calculation of price

reduction for F.O.R destination contract.

In the case of imports, the contractual delivery date shall be considered from the date of

Letter of Credit (L/C) or the date of L/C amendment because of Buyer’s fault plus one

week (to take care of transit time for receipt of L/c) plus the delivery schedule as

indicated by the vendors.

In case of the shipment taking place on “Cash against documents”, the contractual

delivery shall be taken from the date of purchase order plus one week (to take care of

transit time for receipt of order) plus delivery period.

Further the date of B/L or House airway bill shall be considered to find out the delay with

respect to contractual delivery date. In case of FOB shipments if the vessel is not

available then the intimation by vendors regarding readiness of the goods for the

shipment shall be considered for calculating the delay if any. So vendor shall inform the

Page 15 of 24

readiness of material for shipment on FOB (Free on Board)basis / FCA (Free on Carrier)

basis.

20.3.2. Cancel the order in part or full and purchase such cancelled quantities from elsewhere on

account at the risk and cost of the vendor, without prejudice to its right under 20.3.1

above in respect of goods delivered.

21. RISK PURCHASE CLAUSE :

BPCL reserves the right to curtail or cancel the order either in full or part thereof if the

vendor fails to comply with the delivery schedule and other terms & conditions of the

order. BPCL also reserves the right to procure the same or similar materials/equipment

through other sources at vendor's entire risk, cost and consequences. Further, the vendor

agrees that in case of procurement by the owner from other sources the differential

amount paid by the owner shall be on account of the vendor together with any interest

and other costs accrued thereon for such procurement.

22. FORCE MAJEURE CLAUSE :

(A) Definition: The term “Force Majeure” means any event or circumstance or

combination of events or circumstances that affects the performance by the

vendor of its obligations pursuant to the terms of this Agreement (including by

preventing, hindering or delaying such performance), but only if and to the extent

that such events and circumstances are not within the vendor’s reasonable control

and were not reasonably foreseeable and the effects of which the vendor could not

have prevented or overcome by acting as a Reasonable and Prudent person or, by

the exercise of reasonable skill and care. Force Majeure events and circumstances

shall in any event include the following events and circumstances to the extent

they or their consequences satisfy the requirements set forth above in this Clause:

(i) the effect of any element or other act of God, including any storm,

flood, drought, lightning, earthquake, tidal wave, tsunami, cyclone

or other natural disaster;

(ii) fire, accident, loss or breakage of facilities or equipment, structural

collapse or explosion;

(iii) epidemic, plague or quarantine;

(iv) air crash, shipwreck, or train wreck;

(v) acts of war (whether declared or undeclared), sabotage, terrorism

or act of public enemy (including the acts of any independent unit

or individual engaged in activities in furtherance of a programme

of irregular warfare), acts of belligerence of foreign enemies

(whether declared or undeclared), blockades, embargoes, civil

disturbance, revolution, rebellion or insurrection, exercise of

military or usurped power, or any attempt at usurpation of power;

Page 16 of 24

(vi) radioactive contamination or ionizing radiation;

( B) Notice and Reporting:

( i ) The Vendor shall as soon as reasonably practicable after the date

of commencement of the event of Force Majeure, but in any event

no later than two (7) days after such commencement date, notify

the BPCL in writing of such event of Force Majeure and provide

the following information:

(a) reasonably full particulars of the event or circumstance of

Force Majeure and the extent to which any obligation will

be prevented or delayed;

(b) such date of commencement and an estimate of the period

of time required to enable the vendor to resume full

performance of its obligations; and

(c) all relevant information relating to the Force Majeure and

full details of the measures the vendor is taking to

overcome or circumvent such Force Majeure.

(ii) The Vendor shall, throughout the period during which it is prevented

from performing, or delayed in the performance of, its

obligations under this Agreement, upon request, give or procure

access to examine the scene of the Force Majeure including such

information, facilities and sites as the other Party may

reasonably request in connection with such event. Access to any

facilities or sites shall be at the risk and cost of the Party

requesting such information and access.

(C) Mitigation Responsibility:

(i) The Vendor shall use all reasonable endeavours, acting as a

Reasonable and Prudent Person, to circumvent or overcome any

event or circumstance of Force Majeure as expeditiously as

possible, and relief under this Clause shall cease to be available to

the Vendor claiming Force Majeure if it fails to use such

reasonable endeavours during or following any such event of Force

Majeure.

(ii) The Vendor shall have the burden of proving that the

circumstances constitute valid grounds of Force Majeure under this

Clause and that it has exercised reasonable diligence efforts to

remedy the cause of any alleged Force Majeure.

(iii) The Vendor shall notify BPCL when the Force Majeure has

terminated or abated to an extent which permits resumption of

performance to occur and shall resume performance as

Page 17 of 24

expeditiously as possible after such termination or abatement.

(D) Consequences of Force Majeure. Provided that the Vendor has

complied and continues to comply with the obligations of this

Clause and subject to the further provisions:

(i) the obligations of the Parties under this Agreement to the extent

performance thereof is prevented or impeded by the event of Force

Majeure shall be suspended and the Parties shall not be liable for

the non-performance thereof for the duration of the period of Force

Majeure; and

(ii) the time period(s) for the performance of the obligations of the

Parties under this Agreement to the extent performance thereof is

prevented or impeded by the event of Force Majeure shall be

extended for the duration of the relevant period of Force Majeure

except as provided herein.

(E) Force Majeure Events Exceeding 60 Days

(i) If an event or series of events (alone or in combination) of Force

Majeure occur, and continue for a period in excess of 60

consecutive days, then BPCL shall have the right to terminate this

agreement, whereupon the Parties shall meet to mitigate the

impediments caused by the Force Majeure event.

23. ARBITRATION CLAUSE :

23.1 Any dispute or difference of any nature whatsoever, any claim, cross-claim,

counter-claim or set off of BPCL/Vendor against omission or on account of any

of the parties hereto arising out of or in relation to this Contract shall be referred

to the Sole Arbitration of Director(Marketing) / Director (HR) / Director (R) of

BPCL as the case may be or to some officer of BPCL who may be nominated by

them.

23.2. In the event the Arbitrator being unable or refusing to act for any reason whatsoever, the

said Directors of BPCL shall designate another person to act as an Arbitrator in

accordance with the terms of the said Contract/Agreement. The Arbitrator newly

appointed shall be entitled to proceed with the reference from the point at which it was

left by his predecessor.

23.3. It is known to the parties herein that the Arbitrator appointed hereunder is an employee of

the Corporation and may be Share holder of the Corporation.

23.4. The award of the Arbitrator so appointed shall be final, conclusive and binding on all the

parties to the contract and the law applicable to arbitration proceedings will be the

Arbitration and Conciliation Act, 1996 or any other enactment in replacement thereof.

Page 18 of 24

23.5. The language of the proceedings will be in English and the place of proceedings will be

Mumbai.

23.6. The parties hereby agree that the Courts in the city of Mumbai alone shall have

jurisdiction to entertain any application or other proceedings in respect of anything

arising under this Agreement and any Award or Awards made by the Sole Arbitrator

hereunder shall be filed, if required, in the concerned Courts in the City of Mumbai alone.

(legal)

24. INTEGRITY PACT (IP) :

Vendors are requested to sign & return our pre-signed IP document , if applicable. This

document is essential & binding. Vendor's failure to return the IP document duly signed

along with Bid Document may result in the bid not being considered for further

evaluation.

25. RECOVERY OF SUMS DUE :

Whenever, any claim against vendor for payment of a sum of money arises out of or

under the contract, the owner shall be entitled to recover such sums from any sum then

due or when at any time thereafter may become due from the vendor under this or any

other contract with the owner and should this sum be not sufficient to cover the

recoverable amount of claim(s), the vendor shall pay to BPCL on demand the balance

remaining due.

26. CONFIDENTIALITY OF TECHNICAL INFORMATION :

Drawing, specifications and details shall be the property of the BPCL and shall be

returned by the Vendor on demand. The Vendor shall not make use of drawing and

specifications for any purpose at any time save and except for the purpose of BPCL. The

Vendor shall not disclose the technical information furnished to or organized by the

Vendor under or by virtue of or as a result of the implementation of the Purchase Order to

any person, firm or body or corporate authority and shall make all endeavors to ensure

that the technical information is kept CONFIDENTIAL. The technical information

imparted and supplied to the vendor by BPCL shall at all time remain the absolute

property of BPCL. Imparting of any confidential information by the Vendor will be

breach of contract.

27. PATENTS & ROYALTIES :

The vendor shall fully indemnify BPCL and users of materials specified herein/supplied

at all times, against any action, claim or demand, costs and expenses, arising from or

incurred by reasons of any infringement or alleged infringement of any patent, registered

design, trademark or name, copy right or any other protected rights in respect of any

materials supplied or any arrangement, system or method of using, fixing or working

used by the vendor. In the event of any claim or demand being made or action sought

against BPCL in respect of any of the aforesaid matter, the vendor shall be notified

thereof immediately and the vendor shall at his/its own expense with (if necessary) the

Page 19 of 24

assistance of BPCL (whose all expense shall be reimbursed by the vendor) conduct all

negotiations for the settlement of the same and/or litigation which may arise thereof.

28. LIABILITY CLAUSE :

In case where it is necessary for employees or representatives of the Vendor to go upon

the premises of owner, vendor agrees to assume the responsibility for the proper conduct

of such employees/representatives while on said premises and to comply with all

applicable Workmen's Compensation Law and other applicable Government Regulations

and Ordinances and all plant rules and regulations particularly in regard to safety

precautions and fire hazards. If this order requires vendor to furnish labour at site, such

vendor's workmen or employees shall under no circumstances be deemed to be in owner's

employment and vendor shall hold himself responsible for any claim or claims which

they or their heirs, dependent or personal representatives, may have or make, for damages

or compensation for anything done or committed to be done, in the course of carrying

out the work covered by the purchase order, whether arising at owner's premises or

elsewhere and agrees to indemnify the owner against any such claims, if made against the

owner and all costs of proceedings, suit or actions which owner may incur or sustain in

respect of the same.

29. COMPLIANCE OF REGULATIONS :

Vendor warrants that all goods/Materials covered by this order have been produced, sold,

dispatched, delivered and furnished in strict compliance with all applicable laws,

regulations, labour agreement, working condition and technical codes and statutory

requirements as applicable from time to time. The vendor shall ensure compliance with

the above and shall indemnify owner against any actions, damages, costs and expenses of

any failure to comply as aforesaid.

30. REJECTION, REMOVAL OF REJECTED GOODS AND REPLACEMENT:

In case the testing and inspection at any stage by inspectors reveal that the equipment,

materials and workmanship do not comply with specification and requirements, the same

shall be removed by the vendor at his/its own expense and risk, within the time allowed

by the owner. The owner shall be at liberty to dispose off such rejected goods in such

manner as he may think appropriate. In the event the vendor fails to remove the rejected

goods within the period as aforesaid, all expenses incurred by the owner for such disposal

shall be to the account of the vendor. The freight paid by the owner, if any, on the inward

journey of the rejected materials shall be reimbursed by the vendor to the owner before

the rejected materials are removed by the vendor. The vendor will have to proceed with

the replacement of the equipment or part of equipment without claiming any extra

payment if so required by the owner. The time taken for replacement in such event will

not be added to the contractual delivery period.

31. NON-WAIVER :

Failure of the Owner to insist upon any of the terms or conditions incorporated in the

Purchase Order or failure or delay to exercise any rights or remedies herein, or by law or

failure to properly notify Vendor in the event of breach, or the acceptance of or payment

of any goods hereunder or approval of design shall not release the Vendor and shall not

be deemed a waiver of any right of the Owner to insist upon the strict performance

Page 20 of 24

thereof or of any of its or their rights or remedies as to any such goods regardless of when

such goods are shipped, received or accepted nor shall any purported oral modification or

revision of the order by BPCL act as waiver of the terms hereof. Any waiver to be

effective must be in writing. Any lone incident of waiver of any condition of this

agreement by BPCL shall not be considered as a continuous waiver or waiver for other

condition by BPCL.

32. NEW & UNUSED MATERIAL :

All the material supplied by the vendor shall be branded new, unused and of recent

manufacture.

33. PURCHASE PREFERENCE CLAUSE :

Owner reserves its right to allow Public Sector Enterprises (Central/State), purchase

preference as admissible/applicable from time to time under the existing Govt. policy.

Purchase preference to a PSE shall be decided based on the price quoted by PSE as

compared to L1 Vendor at the time of evaluation of the price bid.

Owner reserves its right to allow Micro and Small Enterprises (MSEs) and MSEs

owned by Scheduled Caste (SC) or the Scheduled tribe (ST) entrepreneurs,

purchase preference as admissible/applicable from time to time under the existing Govt.

policy. Purchase preference to a MSE and a MSE owned by SC/ST entrepreneurs

shall be decided based on the price quoted by the said MSEs as compared to L1 Vendor

at the time of evaluation of the price bid.

34. CANCELLATION :

34.1. BPCL reserves the right to cancel the contract/purchase order or any part thereof through

a written notice to the vendor if.

34.1.1. The vendor fails to comply with the terms of this purchase order/contract.

34.1.2. The vendor becomes bankrupt or goes into liquidation.

34.1.3. The vendor fails to deliver the goods on time and/or replace the rejected goods promptly.

34.1.4. The vendor makes a general assignment for the benefit of creditors.

34.1.5. A receiver is appointed for any of the property owned by the vendor.

34.2. Upon receipt of the said cancellation notice, the vendor shall discontinue all work on the

purchase order matters connected with it. BPCL in that event will be entitled to procure

the requirement in the open market and recover excess payment over the vendor's agreed

price if any, from the vendor and also reserving to itself the right to forfeit the security

deposit if any, made by the vendor against the contract. The vendor is aware that the said

goods are required by BPCL for the ultimate purpose of materials production and that

non-delivery may cause lossof production and consequently loss of profit to the BPCL. In

Page 21 of 24

this-event of BPCL exercising the option to claim damages for non delivery other than

by way of difference between the market price and the contract price, the vendor shall

pay to BPCL, fair compensation to be agreed upon between BPCL and the vendor. The

provision of this clause shall not prejudice the right of BPCL from invoking the

provisions of price reduction clause mentioned in 20.3.1 as aforesaid.

35. ANTI –COMPETITIVE AGREEMENTS/ABUSE OF DOMINANT POSITION :

The Competition Act, 2002 as amended by the Competition (Amendment) Act, 2007 (the

Act), prohibits anti- competitive practices and aims at fostering competition and at

protecting Indian markets against anti- competitive practices by enterprises. The Act

prohibits anti- competitive agreements, abuse of dominant position by enterprises, and

regulates combinations (consisting of acquisition, acquiring of control and M&A)

wherever such agreements, abuse or combination causes, or is likely to cause, appreciable

adverse effect on competition in markets in India. BPCL reserves the right to approach

the Competition Commission established under the Act of Parliament and file

information relating to anti-competitive agreements and abuse of dominant position. If

such a situation arises, then Vendors are bound by the decision of the Competitive

Commission and also subject to penalty and other provisions of the Competition Act.

36. ASSIGNMENT

The Vendor can / does not have any right to assign his rights and obligations under these

general purchase conditions without the prior written approval of BPCL.

37. GOVERNING LAW

These General Purchase Conditions shall be governed by the Laws of India.

38. AMENDMENT

Any amendment to these General Purchase Conditions can be made only in writing and

with the mutual consent of the parties to these conditions.

39. SPECIAL PURCHASE CONDITIONS

In case of a conflict between the clauses, terms and conditions of General Purchase

Conditions and Special Purchase condition, the clauses, terms and conditions of Special

Purchase Condition will have an overriding effect over General Purchase Conditions and

the same shall be applicable.

Page 22 of 24

40. NOTICES

Any notices to be given hereunder by a Party to the other shall be in English and

delivered by hand or sent by courier or facsimile to the other Party at the address

or facsimile number stated below or such other address or number as may be

notified by the relevant Party from time to time:

BPCL

_______________________ _______________________

_______________________

Vendor

_______________________

_______________________

_______________________

Please sign & return all the pages of GPC as a token of your acceptance of all the terms &

conditions as mentioned above.

Page 23 of 24

Annexure I

PERFORMANCE BANK GUARANTEE

(On Non-judicial paper for appropriate value)

To,

Bharat Petroleum Corporation Limited

---------------------------------

--------------------------------

Dear Sir,

In consideration of the Bharat Petroleum Corporation Limited, (hereinafter called ‘the Company’

which expression shall include its successors and assigns) having awarded to M/s. (Name)

………. (Constitution)………….. (address) ……….(hereinafter referred to as “The vendor”

which expression shall wherever the subject or context so permits include its successors and

assigns) a supply contract in terms interalia, of the Company’s Purchase order No…….. dated

………. and the General and Special Purchase Conditions of the Company and upon the

condition of vendor’s furnishing security for the performance of the vendor’s obligations and/or

discharge of the vendor’s liability under and / or in connection with the said supply contract upto

a sum of Rs.(in figures)…………..Rs(in words)…………………………only amounting to 10%

(ten percent)of the total contract value.

We, (Name)…………..(constitution) ……………(hereinafter called “the Bank” which

expression shall include its successors and assigns) hereby jointly and severally undertake and

guarantee to pay to the Company in -----(Currency) forthwith on demand in writing and without

protest or demur of any and all moneys any wise payable by the Vendor to the Company under in

respect of or in connection with the said supply contract inclusive of all the Company’s losses and

expenses and other moneys anywise payable in respect to the above as specified in any notice of

demand made by the Company to the Bank with reference to this Guarantee upto an aggregate

limit of Rs(in figures)…………Rs(in words)……………………….only.

AND the Bank hereby agrees with the Company that

i. This Guarantee/undertaking shall be a continuing guarantee and shall remain valid

and irrevocable for all claims of the Company and liabilities of the vendor arising

upto and until midnight of …………………………………..

Page 24 of 24

This date shall be 6 months from the last date of guarantee period.

ii This Guarantee / Undertaking shall be in addition to any other guarantee or security of

whatsoever that the Company may now or at any time otherwise have in relation to the vendor’s

obligation/liabilities under and /or connection with the said supply contract, and the Company

shall have full authority to take recourse to or reinforce this security in preference to the other

security(ies) at its sole discretion, and no failure on the part of the Company in enforcing or

requiring enforcement of any other security shall have the effect of releasing the Bank from its

liability hereunder.

ii. The Company shall be at liability without reference to the Bank and without effecting

the full liability of the Bank hereunder to take any other security in respect of the

vendor’s obligations and /or liabilities under or in connection with the said supply

contract and to vary the terms vis a vis the vendor of the said supply contract or to

grant time and / or indulgence to the vendor or to reduce or to increase or otherwise

vary the prices of the total contract value or to release or to forbear from enforcement

all or any of the obligations of the vendor under the said supply contract and / or the

remedies of the Company under any other security(ies) now or hereafter held by the

Company and no such dealing(s), variation(s), reduction(s), increase(s) or the

indulgence(s) or arrangement(s) with the vendor or release or forbearance whatsoever

shall have the effect of releasing the Bank from its full liability to the Company

hereunder or of prejudicing rights of the Company against the Bank.

iv. This Guarantee /Undertaking shall not be determined by the liquidation or winding up

ordissolution or change of constitution or insolvency of the vendor but shall in all respects and for

all purposes be binding and operative until payment of all moneys payable to the Company in

terms hereof.

v. The Bank hereby waives all rights at any time inconsistent with the terms of the Guarantee /

Undertaking and the obligations of the Bank in terms hereof shall not be anywise affected or

suspended by reason of any dispute or disputes having been raised by the vendor (whether or not

pending before any Arbitrator, officer, Tribunal or Court) or any denial of liability by the vendor

or any other order of communication whatsoever by the vendor stopping or preventing or

purporting to stop or prevent any payment by the Bank to the Company in terms hereof.

vi. The amount stated in any notice of demand addressed by the Company to the Guarantor as

liable to be paid to the Company by the vendor or as suffered or incurred by the Company on

account of any losses or damages of costs, charges and or expenses shall as between the Bank and

the Company be conclusive of the amount so liable to be paid to the Company or suffered or

incurred by the Company, as the case may be and payable by the Guarantor to Company in terms

hereof.

Yours faithfully,

(Signature)

NAME & DESIGNATION

NAME OF THE BANK

NOTES:

Comm Questionnaires Page 1 of 2

Annexure - 6

Commercial Questionnaire


and BPCL-Kochi Refinery


Vendor Name: M/s. _______________________________________________________________

Vendor’s Offer Ref. No. : _________________________________________ Date : ____________

Contact Person: _____________________________ E-Mail _____________________________

Mobile No. ____________________________________ Tel. No._____________________________

1. DULY SIGNED & STAMPED COPIES OF THIS “QUESTIONNAIRE”, WITH ALL THE CLAUSES

DULY CONFIRMED/ PRECISELY REPLIED TO BY THE VENDOR, SHALL BE UPLOADED WITH EACH AND EVERY SET OF VENDOR'S UNPRICED QUOTATION.

2. ALL COMMERCIAL TERMS ARE GIVEN/CONFIRMED IN THE QUESTIONNAIRE ITSELF AND NOT ELSEWHERE IN THE QUOTATION. IN CASE OF CONTRADICTION, THE SAME GIVEN HEREIN SHALL PREVAIL.

3. FAILURE ON THE PART OF VENDOR IN SUBMITTING THIS DULY FILLED-UP "QUESTIONNAIRE WITH UNPRICED BID AND/OR UPLOADING / SUBMITTING INCOMPLETE REPLIES MAY LEAD TO REJECTION OF VENDOR'S QUOTATION”

4. YOUR OFFER SHALL BE IN TOTAL COMPLIANCE WITH RFQ DOCUMENTS CONTAINING COMMERCIAL AND TECHNICAL SPECIFICATIONS INCLUDING GENERAL / TECHNICAL NOTES AND SCOPE OF SUPPLY INCLUDING DOCUMENTATION AND SUBSEQUENT TECHNICAL/COMMERCIAL AMENDMENT AND TECHNICAL/COMMERCIAL CORRIGENDUM, IF ANY.

S.No DESCRIPTION VENDOR’S CONFIRMATION

1 Technical Specifications as per Tender. Confirmed / Not Confirmed refer deviation sheet

2 Bid Validity period: Confirm Offer validity of 120 days from final bid due date.

Confirmed / Not Confirmed refer deviation sheet

3 Defects Liability Period: Confirm acceptance of defect liability period clause as indicated in Special Purchase Conditions.

Accepted / Not accepted refer deviation sheet

4 Delivery Period: 03 weeks from the date of Call-off / Purchase Order whichever is earlier, on FOT Site basis. For detailed refer Special Purchase Conditions (SPC)


5

Payment Terms: 100% payment within 30 days on receipt and acceptance of material at site and against submission of Performance bank guarantee (PBG). For detailed refer Special Purchase Conditions (SPC).


6 Prices have been furnished as per “Format For Submitting Price”.

Furnished / Not furnished refer deviation sheet

7 Delayed Delivery: For detailed clause refer General Purchase Conditions (GPC).


8 Firmness of prices: Quoted prices shall remain firm and fixed till complete execution of the order.

Confirmed / Not confirmed refer deviation sheet

9 Confirm that the prices quoted are without any price variation clause.

Confirmed / Not confirmed refer deviation sheet

Comm Questionnaires Page 2 of 2

S.No DESCRIPTION VENDOR’S CONFIRMATION

10 The quoted base rate shall include all expenses towards all testing charges,

Noted & Confirmed

11 Arbitration Clause: Confirm acceptance of Arbitration Clause as indicated in Special Purchase Conditions (SPC).


12

Printed terms and conditions, if any, appearing in quotation, shall not be applicable in the event of order. In case of contradiction between the confirmations given above and terms & conditions mentioned elsewhere in the offer, the confirmation given herein above shall prevail.

Confirmed & Accepted

13 Confirm that integrity pact is duly signed & submitted without any deviations.


14

Whether any of the Directors of Vendor is a relative of any Director of BPCL or the vendor is a firm in which any Director of BPCL or his relative is a Partner or the vendor is a private company in which any director of BPCL is a member or Director.

15 Material is required at BPCL warehouse/site on door delivery basis.


16 Specify Despatch Point for Supply of Materials.

Material shall be despatched

from :____________________

State:____________________

17

Please confirm you have submitted declaration regarding holiday listing format given in the tender. In case you have been banned or delisted by BPCL/MOP&NG/any other Oil PSEs, this should be clearly stated in the declaration. If this declaration is not furnished, the bid shall be rejected as non-responsive.


18 Confirm BPCL holiday listing Policy for vendors. Referred web link given below: https://bharatpetroleum.in/pdf/holidaylistingpolicyfinal.pdf

Noted and confirmed

19 Transit risk insurance shall be covered by BPCL and the same has not been included in the quoted prices.

Noted and confirmed

20

Please confirm, whether your company is Micro and Small Enterprises (MSEs) YES / NO OR MSEs owned by Scheduled Caste (SC) or the Scheduled tribe (ST) entrepreneurs. YES / NO

If YES, Category Registered : MICRO or SMALL (Pl tick mark) If YES Pl submit the following documents :

• Self-attested copy of all the pages of the EM-II certificate issued by the appropriate authorities mentioned in the Public procurement policy of MSEs-2012.; and

• Vendors declaration / affidavit in their Organization/ Company Letter Head, stating that, in the event of award of contract, all the ordered supplies shall be made from the unit for which MSE certificate has been submitted

(Signature of Vendor with Company seal) Name of the Authorised Signatory : Designation : Date :

ANNEXURE - 7

DEVIATION FORM (TECHNICAL)



REF. : CRFQ No. 1000285313, e-Tender No. 27351 Name of vendor: Schedule of Deviations in reference to BPCL SPECIFICATIONS 1. Vendor may give here a consolidated list of technical deviations for all sections of

the SPECIFICATIONS, which for an appropriate offer is considered unavoidable by him.

2. Deviations mentioned elsewhere in the offer shall not be taken cognizance by the COMPANY and any such deviations if indicated elsewhere other than this form will render the offer non-responsive and shall liable to be rejected.

3. Vendor shall state the reasons for the deviations in the `Remark' column. 4. All other clauses of the SPECIFICATIONS (not mentioned in this form) shall be

deemed to be fully complied by the vendor 5. Only the deviations listed herein, in conjunction with the SPECIFICATIONS, shall

constitute the contract requirements for the award of job to the vendor.

Sr. No.

Annexure- No.

Clause No.

Requirement of the BPCL

SPECIFICATIONS

Deviations to the SPECIFICATIONS

Remarks

1 2 3 4 5 6

Vendor Signature of the authorized signatory : Name of the authorized signatory : Stamp & Date :

ANNEXURE - 8

DEVIATION FORM (COMMERCIAL)



REF. : CRFQ No. 1000285313, e-Tender No. 27351 Name of vendor: Schedule of Deviations in reference to COMMERCIAL TERMS AND CONDITIONS 1. Vendor may give here a consolidated list of Commercial deviations for all

sections of the tender document, which for an appropriate offer is considered unavoidable by him.

2. Deviations mentioned elsewhere in the offer shall not be taken cognizance by the COMPANY and any such deviations if indicated elsewhere other than this form will render the offer non-responsive and shall liable to be rejected.

3. Vendor shall state the reasons for the deviations in the `Remark' column. 4. All other clauses of the COMMERCIAL TERMS AND CONDITIONS (not

mentioned in this form) shall be deemed to be fully complied by the PCMS vendor

5. Only the deviations listed herein, in conjunction with the COMMERCIAL TERMS AND CONDITIONS, shall constitute the contract requirements for the award of job to the vendor.

Sr. No.

Annexure- No.

Clause No.

Commercial terms and conditions

Deviations Remarks

1 2 3 4 5 6

Vendor

Signature of the authorized signatory : Name of the authorized signatory : Stamp & Date :

Annexure - 9

The Declaration should be produced on Vendor’s Letter Head.

PROFORMA OF DECLARATION OF HOLIDAY LISTING

REF. : CRFQ No. 1000285313, e-Tender No. 27351 In the case of a Proprietary Concern:

I hereby declare that neither I in the name of my Proprietary concern M/s. _____________ which is submitting the

accompanying Bid / Tender nor any other concern in which I am a proprietor nor in any partnership firm in which I

am involved as a Managing Partner have been placed on holiday list declared by Bharat Petroleum Corporation

Limited/MOP&NG/any other Oil PSEs, except as indicated below:

(Here given particulars of holiday listing and in absence thereof state “NIL”).

In the case of a Partnership Firm

We hereby declare that neither we, M/s. __________________ submitting the accompanying Bid / Tender nor any

partner involved in the management of the said firm either in his individual capacity or as proprietor of any firm or

concern have or has been placed on holiday list declared by Bharat Petroleum Corporation Limited/MOP&NG/any

other Oil PSEs, except as indicated below:


In the case of Company

We hereby declared that we have not been placed on any holiday list declared by Bharat Petroleum Corporation

Limited/MOP&NG/any other Oil PSEs, except as indicated below:


It is understood that if this declaration is found to be false in any particular, Bharat Petroleum Corporation Limited

shall have the right to reject my / our bid, and, if the bid has resulted in a contract, the contract is liable to be

terminated.

Place: ____________ Signature of the Bidder______________

Date: ____________ Name of the Signatory_______________

Page 1 of 1

Page 1 of 5

Annexure - 10

IINNTTEEGGRRIITTYY PPAACCTT

Between

BBhhaarraatt PPeettrroolleeuumm CCoorrppoorraattiioonn LLiimmiitteedd ((BBPPCCLL)) hheerreeiinnaafftteerr rreeffeerrrreedd ttoo aass ""TThhee PPrriinncciippaall"",,

AAnndd

…………………………………………………………………………………………….. hereinafter referred to as "The Bidder/

Contractor/ Supplier".

PPrreeaammbbllee

The Principal intends to award, under laid down organization procedures, contract/s for Tender for

“Annual Rate Contract for Supply of Bearings for BPCL-Mumbai Refinery and BPCL-Kochi

Refinery” (CRFQ-1000285313, e-Tender No. 27351). The Principal values full compliance with all

relevant laws and regulations, and the principles of economic use of resources, and of fairness and

transparency in its relations with its Bidder/s, Contractor/s and Supplier/s.

In order to achieve these goals, the Principal cooperates with the renowned international Non-

Governmental Organisation "Transparency International" (TI). Following TI's national and international

experience, the Principal will appoint an Independent External Monitor who will monitor the tender

process and the execution of the contract for compliance with the principles mentioned above.

Section 1 - Commitments of the Principal

(1) The Principal commits itself to take all measures necessary to prevent corruption and to

observe the following principles:

a) No employee of the Principal, personally or through family members, will in connection

with the tender, or the execution of the contract, demand, take a promise for or

accept, for himself/ herself or third person, any material or immaterial benefit which

he/she is not legally entitled to.

b) The Principal will, during the tender process, treat all Bidders with equity and reason.

The Principal will, in particular, before and during the tender process, provide to all

Bidders the same information and will not provide to any Bidder confidential/

additional information through which the Bidder could obtain an advantage in relation

to the tender process or the contract execution.

c) The Principal will exclude from the process all known prejudiced persons.

(2) If the Principal obtains information on the conduct of any of its employees which is a criminal

offence under the relevant Anti-Corruption Laws of India, or if there be a substantive

suspicion in this regard, the Principal will inform its Vigilance Office and in addition can initiate

disciplinary actions.

Page 2 of 5

Section 2 - Commitments of the Bidder/ Contractor/ Supplier

((11)) TThhee BBiiddddeerr// CCoonnttrraaccttoorr// SSuupppplliieerr ccoommmmiittss iittsseellff ttoo ttaakkee aallll mmeeaassuurreess nneecceessssaarryy ttoo pprreevveenntt

ccoorrrruuppttiioonn.. HHee ccoommmmiittss hhiimmsseellff ttoo oobbsseerrvvee tthhee ffoolllloowwiinngg pprriinncciipplleess dduurriinngg hhiiss ppaarrttiicciippaattiioonn iinn tthhee

tteennddeerr pprroocceessss aanndd dduurriinngg tthhee ccoonnttrraacctt eexxeeccuuttiioonn..

aa)) TThhee BBiiddddeerr// CCoonnttrraaccttoorr// SSuupppplliieerr wwiillll nnoott,, ddiirreeccttllyy oorr tthhrroouugghh aannyy ootthheerr ppeerrssoonn oorr ffiirrmm,, ooffffeerr,,

pprroommiissee oorr ggiivvee ttoo aannyy ooff tthhee PPrriinncciippaall''ss eemmppllooyyeeeess iinnvvoollvveedd iinn tthhee tteennddeerr pprroocceessss oorr tthhee

eexxeeccuuttiioonn ooff tthhee ccoonnttrraacctt oorr ttoo aannyy tthhiirrdd ppeerrssoonn,, aannyy mmaatteerriiaall oorr iimmmmaatteerriiaall bbeenneeffiitt wwhhiicchh hhee//sshhee

iiss nnoott lleeggaallllyy eennttiittlleedd ttoo,, iinn oorrddeerr ttoo oobbttaaiinn iinn eexxcchhaannggee,, aannyy aaddvvaannttaaggee ooff aannyy kkiinndd wwhhaattssooeevveerr

dduurriinngg tthhee tteennddeerr pprroocceessss oorr dduurriinngg tthhee eexxeeccuuttiioonn ooff tthhee ccoonnttrraacctt..

b) The Bidder/ Contractor/ Supplier will not enter with other Bidders into any

undisclosed agreement or understanding, whether formal or informal. This applies in

particular to prices, specifications, certifications, subsidiary contracts, submission or

non-submission of bids or any other actions to restrict competitiveness or to

introduce cartelisation in the bidding process.

c) The Bidder/ Contractor/ Supplier will not commit any offence under the relevant Anti-

Corruption Laws of India; further the Bidder/ Contractor/ Supplier will not use

improperly, for purposes of competition or personal gain, or pass on to others, any

information or document provided by the Principal as part of the business

relationship, regarding plans, technical proposals and business details, including

information contained or transmitted electronically.

d) The Bidder/ Contractor/ Supplier will, when presenting his bid, disclose any and all

payments he has made, is committed to, or intends to make to agents, brokers or any

other intermediaries in connection with the award of the contract.

(2) The Bidder/ Contractor/ Supplier will not instigate third persons to commit offences outlined

above or be an accessory to such offences.

Section 3 - Disqualification from Tender Process and Exclusion from Future Contracts

IIff tthhee BBiiddddeerr,, bbeeffoorree ccoonnttrraacctt aawwaarrdd,, hhaass ccoommmmiitttteedd aa ttrraannssggrreessssiioonn tthhrroouugghh aa vviioollaattiioonn ooff SSeeccttiioonn 22 oorr

iinn aannyy ootthheerr ffoorrmm ssuucchh aass ttoo ppuutt hhiiss rreelliiaabbiilliittyy oorr ccrreeddiibbiilliittyy aass BBiiddddeerr iinnttoo qquueessttiioonn,, tthhee PPrriinncciippaall iiss

eennttiittlleedd ttoo ddiissqquuaalliiffyy tthhee BBiiddddeerr ffrroomm tthhee tteennddeerr pprroocceessss oorr ttoo tteerrmmiinnaattee tthhee ccoonnttrraacctt,, iiff aallrreeaaddyy

ssiiggnneedd,, ffoorr ssuucchh rreeaassoonn..

(1) If the Bidder/ Contractor/ Supplier has committed a transgression through a violation of

Section 2 such as to put his reliability or credibility into question, the Principal is also entitled

to exclude the Bidder/ Contractor/ Supplier from future contract award processes. The

imposition and duration of the exclusion will be determined by the severity of the

transgression. The severity will be determined by the circumstances of the case, in particular

the number of transgressions, the position of the transgressors within the company hierarchy

of the Bidder and the amount of the damage. The exclusion will be imposed for a minimum of

6 months and maximum of 3 years.

(2) A transgression is considered to have occurred if the Principal after due consideration of the

available evidences, concludes that no reasonable doubt is possible.

Page 3 of 5

(3) The Bidder accepts and undertakes to respect and uphold the Principal's absolute right to

resort to and impose such exclusion and further accepts and undertakes not to challenge or

question such exclusion on any ground, including the lack of any hearing before the decision

to resort to such exclusion is taken. This undertaking is given freely and after obtaining

independent legal advice.

(4) If the Bidder/ Contractor/ Supplier can prove that he has restored/ recouped the damage

caused by him and has installed a suitable corruption prevention system, the Principal may

revoke the exclusion prematurely.

Section 4 - Compensation for Damages

(1) If the Principal has disqualified the Bidder from the tender process prior to the award

according to Section 3, the Principal is entitled to demand and recover from the Bidder

liquidated damages equivalent to Earnest Money Deposit/Bid Security.

(2) If the Principal has terminated the contract according to Section 3, or if the Principal is entitled

to terminate the contract according to Section 3, the Principal shall be entitled to demand and

recover from the Contractor/ Supplier liquidated damages equivalent to Security Deposit/

Performance Bank Guarantee.

(3) The Bidder agrees and undertakes to pay the said amounts without protest or demur subject

only to condition that if the Bidder/ Contractor/ Supplier can prove and establish that the

exclusion of the Bidder from the tender process or the termination of the contract after the

contract award has caused no damage or less damage than the amount of the liquidated

damages, the Bidder/ Contractor/ Supplier shall compensate the Principal only to the extent

of the damage in the amount proved.

Section 5 - Previous Transgression

(1) The Bidder declares that no previous transgression occurred in the last 3 years with any other

Company in any country conforming to the TI approach or with any other Public Sector

Enterprise in India that could justify his exclusion from the tender process.

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender

process or the contract, if already awarded, can be terminated for such reason.

Section 6 - Equal treatment of all Bidders/ Contractors/ Suppliers/ Subcontractors

(1) The Bidder/ Contractor/ Supplier undertakes to demand from all subcontractors a

commitment in conformity with this Integrity Pact, and to submit it to the Principal before

contract signing.

(2) The Principal will enter into agreements with identical conditions as this one with all Bidders,

Contractors/ Suppliers and Subcontractors.

(3) The Principal will disqualify from the tender process all Bidders who do not sign this Pact or

violate its provisions.

Page 4 of 5

Section 7 - Punitive Action Against Violating Bidders/ Contractors/ Suppliers/ Subcontractors

IIff tthhee PPrriinncciippaall oobbttaaiinnss kknnoowwlleeddggee ooff ccoonndduucctt ooff aa BBiiddddeerr,, CCoonnttrraaccttoorr,, SSuupppplliieerr oorr SSuubbccoonnttrraaccttoorr,, oorr ooff

aann eemmppllooyyeeee oorr aa rreepprreesseennttaattiivvee oorr aann aassssoocciiaattee ooff aa BBiiddddeerr,, CCoonnttrraaccttoorr,, SSuupppplliieerr oorr SSuubbccoonnttrraaccttoorr

wwhhiicchh ccoonnssttiittuutteess ccoorrrruuppttiioonn,, oorr iiff tthhee PPrriinncciippaall hhaass ssuubbssttaannttiivvee ssuussppiicciioonn iinn tthhiiss rreeggaarrdd,, tthhee PPrriinncciippaall

wwiillll iinnffoorrmm tthhee VViiggiillaannccee OOffffiiccee..

Section 8 - Independent External Monitors

(1) The Principal has appointed competent and credible Independent External Monitors for this

Pact. The task of the Monitor is to review independently and objectively, whether and to what

extent the parties comply with the obligations under this agreement.

(2) The Monitor is not subject to instructions by the representatives of the parties and performs

his functions neutrally and independently. He reports to the Chairperson of the Board of the

Principal.

(3) The Bidder/ Contractor/ Supplier accepts that the Monitor has the right to access without

restriction to all Project documentation of the Principal including that provided by the Bidder/

Contractor/ Supplier. The Bidder/ Contractor/ Supplier will also grant the Monitor, upon his

request and demonstration of a valid interest, unrestricted and unconditional access to this

project documentation. The same is applicable to Subcontractors. The Monitor is under

contractual obligation to treat the information and documents of the Bidder/ Contractor/

Supplier/ Subcontractor with confidentially.

(4) The Principal will provide to the Monitor sufficient information about all meetings among the

parties related to the Project provided such meetings could have an impact on the contractual

relations between the Principal and the Bidder/ Contractor/ Supplier. The parties offer to the

Monitor the option to participate in such meetings.

(5) As soon as the Monitor notices, or believes to notice, a violation of this agreement, he will so

inform the Management of the Principal and request the Management to discontinue or heal

the violation, or to take other relevant action. The Monitor can in this regard submit non-

binding recommendation. Beyond this, the Monitor has no right to demand from the parties

that they act in a specific manner, refrain from action or tolerate action. However, the

Independent External Monitor shall give an opportunity to the Bidder/ Contractor/ Supplier to

present its case before making its recommendations to the Principal.

(6) The Monitor will submit a written report to the Chairperson of the Board of the Principal

within 8 to 10 weeks from the date of reference or intimation to him by the 'Principal' and,

should the occasion arise, submit proposals for correcting problematic situations.

(7) If the Monitor has reported to the Chairperson of the Board a substantiated suspicion of an

offence under relevant Anti-Corruption Laws of India, and the Chairperson has not, within

reasonable time, taken visible action to proceed against such offence or reported it to the

Vigilance Office, the Monitor may also transmit this information directly to the Central

Vigilance Commissioner, Government of India.

(8) The word 'Monitor' would include both singular and plural.

Page 5 of 5

Section 9 - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor/ Supplier 12

months after the last payment under the respective contract, and for all other Bidders 6 months after

the contract has been awarded.

If any claim is made/ lodged during this time, the same shall be binding and continue to be valid

despite the lapse of this pact as specified above, unless it is discharged/ determined by Chairperson of

the Principal.

Section 10 - Other Provisions

((11)) TThhiiss aaggrreeeemmeenntt iiss ssuubbjjeecctt ttoo IInnddiiaann LLaaww.. PPllaaccee ooff ppeerrffoorrmmaannccee aanndd jjuurriissddiiccttiioonn iiss tthhee

RReeggiisstteerreedd OOffffiiccee ooff tthhee PPrriinncciippaall,, ii..ee.. MMuummbbaaii.. TThhee AArrbbiittrraattiioonn ccllaauussee pprroovviiddeedd iinn tthhee mmaaiinn

tteennddeerr ddooccuummeenntt// ccoonnttrraacctt sshhaallll nnoott bbee aapppplliiccaabbllee ffoorr aannyy iissssuuee// ddiissppuuttee aarriissiinngg uunnddeerr

IInntteeggrriittyy PPaacctt..

(2) Changes and supplements as well as termination notices need to be made in writing. Side

agreements have not been made.

(3) If the Bidder/ Contractor/ Supplier is a partnership or a consortium, this agreement must be

signed by all partners or consortium members.

(4) Should one or several provisions of this agreement turn out to be invalid, the remainder of

this agreement remains valid. In this case, the parties will strive to come to an agreement to

their original intentions.

H. P. Panchal ……………………………

For the Principal For the Bidder/ Contractor/

Supplier

Place ……………… Witness 1 : ………………

(Signature/Name/Address)

Date ………………. Witness 2 : ………………

(Signature/Name/Address)

BUSINESS RULES FOR ON LINE REVERSE AUCTION

Page 1 of 11

Annexure -11

(BASIC DETAILS)

Buyer Name

Bharat Petroleum Corporation Ltd. (CPO Refineries) Mumbai.

Service Provider Details

M/s. Phone No. : Fax No. : Company Website: Intimated later

Date & Time of Auction

Auction Date : Will be intimated later Online Reverse Auction Time : Will be intimated later (**Limited/ Unlimited extensions ) Auction Website: Will be intimated later

Documents Attached

1) Business rule for reverse auction 2) Terms & conditions of reverse auction 3) Online Reverse Auction Schedule (Appendix – I) 4) Process Compliance Statement (Appendix – II) 5) Price Confirmation (Appendix – III) 6) Contact Information

SPECIAL INSTRUCTIONS

Bidding in the last minutes and seconds should be avoided in the bidders own interest. Neither BPCL nor Service Provider will be responsible for any lapses / failure on the part of the bidder, in such cases.


Page 2 of 11

GENERAL TERMS & CONDITIONS

Against this Enquiry for the subject item/system with detailed scope of supply as per our specification, BPCL, CPO Refineries, Mumbai may resort to “Online Reverse Auction Mode” i.e. ONLINE BIDDING on INTERNET.

1. For the proposed Reverse Auction, technically and commercially acceptable bidders only shall be eligible to participate.

2. BPCL has engaged the services of a Service Provider, who will provide all necessary training and assistance before commencement of on line bidding on Internet.

3. BPCL will inform the bidders in writing, the details of the Service Provider in case of Reverse Auction, so as to enable them to contact the Service Provider and get trained.

4. Information like the Business rules, Reverse Auction event date, time, start price, bid decrement, extensions, etc. also will be communicated through the Service Provider for the compliance of the bidders.

5. Bidders have to email a scanned copy of the Process Compliance Form (Appendix - II) in the prescribed (provided by service provider) before start of Online Reverse Auction. Without this Compliance form, the bidders will not be eligible to participate in the online event.

6. BPCL will provide the calculation sheet (e.g.: EXCEL sheet) which will help to arrive at “total effective Cost to BPCL” for each the bidders to enable them to fill-in the price and keep it ready for keying in during the Reverse Auction.

7. Online Reverse Auction will be conducted on schedule date & time.

8. At the end of Reverse Auction event, the lowest bidder value will be known on the network for each item at each location.

9. The lowest bidder has to email a scanned copy of the price break-up duly signed, filled in prescribed format (as per BPCL’s price excel sheet format), as provided on case-to-case basis, to BPCL through Service Provider within 24 hours of the Reverse Auction without fail.

10. Any variation between the on-line bid value and signed document will be considered as sabotaging the tender process and will invite disqualification of bidder to conduct business with BPCL as per prevailing procedure.

11. Bidders shall note that in case BPCL conducts the Reverse Auction and finalizes this tender, the Sealed Priced-Bids submitted with the offer will not be opened.

12. In case BPCL decides not to conduct Reverse Auction, the Sealed Priced-Bids submitted with the offer, along with price impacts (if any) already available with BPCL, shall be opened as per BPCL standard practice for finalization of the tender.

13. Similarly, if for any unforeseen reason the Reverse Auction is conducted by BPCL for this particular tender and the results are found to be inconclusive by BPCL, then BPCL may open the Sealed Priced-Bids submitted with the offer, along with price impacts (if any) already available with BPCL, and finalize the tender as per BPCL standard practice.

14. Only those vendors, who submit their Process Compliance Form, will be eligible to participate in the Online English Reverse Auction.

15. The Reverse Auction will be treated as closed only when the bidding process gets closed in all respects for the items listed in the tender.


Page 3 of 11

MODALITY FOR FINALIZATION OF THE PROCUREMENT BPCL may finalize the procurement of the item against this Tender through online Reverse Auction mode. BPCL shall make arrangement with. (Name of the Service Provider), who shall be BPCL’s authorized Service Provider(SP) for the same. Please go through the guidelines given below and submit your acceptance to the same along with your Commercial Bid. 1. Computerized reverse auction shall be conducted by BPCL, on pre-specified date, while

the vendors shall be quoting from their own offices / place of their choice. Internet connectivity & other necessary requirements like power backup etc. shall have to be ensured by vendors themselves. In order to ward-off such contingent situation where the vendors are not able to bid for any of the above reason, they are requested to make all the necessary arrangements / alternatives whatever required so that they are able to circumvent such situation and still be able to participate in the reverse auction successfully. Failure of power / problem in Internet connectivity at the premises of vendors during the Online Reverse auction cannot be the cause for not participating in the reverse auction. On account of this, the time for the auction cannot be extended and neither BPCL nor SP is responsible for such eventualities.

2. Service provider shall arrange to train your nominated person (s), without any cost to you. They shall also explain you, all the Rules related to the Reverse Auction / Business Rules to be adopted along with the calculation sheet in excel format. You are required to give your compliance on it at least 24 hours before the start of bid process.

3. Material for Bid: Respective CRFQ No._____

4. Starting price & Bid Decrement: The start price applicable in the Online Reverse Auction for described item shall be visible to all bidders on their screen. (i.e. Starting basic Cost and bid decrement value will be displayed). This start price will be derived through BPCL’s internal estimation processes.

5. Bidding Currency & Unit of Measurement: Bidders will enter price in their respective currency while evaluation will be conducted in Indian Rupees (INR) & the Unit of Measurement will be per Meter The price bid placed during the Online Reverse Auction shall be the price of respective CRFQ.

6. Bid Price: The Bidder has to quote as per excel sheet provided by BPCL.

The bidders are requested to note that the ranking would be generated on the condition that the bid submitted by the bidder is confirming to the Starting price & Minimum Decrement Value.

Calculation sheet in excel format to arrive at the Total Effective Cost to BPCL will be provided by Service provider.

7. The technical & commercial terms are as per respective CRFQ , Vendors’ technical and commercial bid and subsequent correspondences between BPCL and the vendors regarding commercial terms & conditions.

8. Validity of Bids: As per BPCL respective CRFQ doc. & agreed terms 9. Delivery: As per BPCL Respective CRFQ doc. & agreed terms


Page 4 of 11

10. At the end of the reverse auction, bidder has to provide a detailed break-up (as per BPCL’s price excel sheet format) to SP for his lowest accepted offer quoted during the Online Reverse Auction within 24 hours of the completion of the Online Reverse Auction.

11. Procedure of Online Reverse Auctioning:

i. Online English Reverse Auction: BPCL will declare its Start price, which shall be visible to the all vendors during the start of the Online Reverse Auction on their respective bidding screens. Please note that the start price of Online Reverse Auction is open to all the participating bidders. Any bidder can start bidding, in the Online Reverse Auction; from the start price itself. On submission of the bid, the rank would be generated for the item. Also, please note that the first online bid that comes in the system during the Online Reverse Auction can be equal to the auction's start price, or lesser than the auction's start price or by at least one decrement, or lesser than the same. The second online bid for any particular item and onwards which the bidder submits will have to be lesser than the respective bidder’s previous bid by at least one decrement value, or lesser than the same. Decrement in multiple would be “No”.

ii. Online English Reverse Auction shall be for a period of 45 minutes. If a bidder places a Bid in the last 5 minutes of Closing of the Auction, the auction shall get extended automatically for another 5 minutes. So, reverse auction will be continued till bid comes in last remaining 5 min. In case, there is no Bid in the last 5 minutes of closing of Auction, the Auction shall get closed automatically without any extension.

iii. After the completion of Online Reverse Auction, the Closing Price shall be available for further processing.

12. Successful vendor shall be required to submit the final prices, quoted during the Online

Reverse Auction, as per BPCL’s price excel sheet format, after the completion of Auction to SP, within 24 hours of the reverse auction, duly signed and stamped on their letterheads as token of acceptance without any new condition other than those already agreed to before start of auction. The Original Copy of the Price Breakup (as per excel sheet) & Price Confirmation (appendix III) should be submitted to the Service provider within 3 days of the completion of the Online Reverse Auction.

13. During the Online Reverse Auction, if no bid is received in the auction system / website

within the specified time duration of the reverse auction, then BPCL at its discretion, may decide to revise the auction's Start Price / scrap the online reverse auction process / proceed with the conventional mode of tendering / any other method as deem fit. The decision of BPCL in this regard will be final & binding on all the vendors.

14. Your bid will be taken as an offer to supply. Bids once made by you, cannot be

cancelled / withdrawn and you shall be bound to supply as mentioned above at your final bid price. Should you back out and not supply as per the rates quoted, BPCL shall take action as appropriate.

15. Login Name & Password: Each Bidder is assigned a Unique User Name & Password by

Service Provider. You are advised to change the Password and edit the information in the Registration Page after the receipt of initial Password from Service provider to ensure confidentiality. All bids made from the Login ID given to you will be deemed to have been made by your company


Page 5 of 11

16. Visibility to the Bidder: The respective bidder will be able to view the following on their screen along with the necessary fields in the Online Reverse Auction:

a. Bid Placed by you. b. Your Own Rank. c. Start Price & Minimum Bid Decrement value. d. Least Effective Cost(L1) of reverse auction quoted by the bidder

17. Lowest Bid of a Bidder: In case the bidder submits more than one bid, the lowest accepted bid will be considered as the bidder’s final offer to execute the work.

18. At the end of the Reverse Auction, BPCL will decide upon the successful bidder. BPCL’s

decision on award of Contract shall be final and binding on all the Bidders. 19. BPCL shall be at liberty to cancel the Online Reverse Auction process / tender at any

time, before ordering, without assigning any reason. 20. Other terms and conditions shall be as per your techno-commercial offers and other

correspondences till date. 21. You are required to submit your acceptance (Process Compliance Form – (Appendix – II))

before participating in the reverse auction.

22. Auction shall be on final bid basis without consideration of e-sealed price bid

submitted by you in e-bid system. All other terms and conditions shall be as per

the RFQ/ Offer/As agreed upon.


Page 6 of 11

BIDDERS TO SPECIFICALLY NOTE

1. The Bidder shall not involve himself or any of his representatives in Price manipulation of any kind by directly or indirectly communicating with other suppliers / bidders.

2. The Bidder shall not divulge either his Bids or any other exclusive details of BPCL to

any other party.

3. BPCL’s decision on award of Contract shall be final and binding on all the Bidders. Conducting Online Reverse Auction is not binding on BPCL for ordering. BPCL reserve the right for ordering & May / may not order for any / all the lot for which reverse auction is being held.

4. BPCL along with Service provider can decide to extend, reschedule or cancel

Auction. Any changes made by BPCL and / or the Service Provider, after the first posting will have to be accepted if the Bidder continues to access the site after that time.

5. BPCL & Service provider shall not have any liability to Bidders for any interruption

or delay in access to the site irrespective of the cause.

6. BPCL & Service provider are not responsible for any damages, including damages that result from, but are not limited to negligence.

7. BPCL & Service provider will not be held responsible for consequential damages,

including but not limited to systems problems, inability to use the system, loss of electronic information etc.

N.B.

- All the Bidders are required to submit the Process Compliance Form (Appendix - II) duly signed to the Service Provider, at least 24 hours before the auction date. After the receipt of the Process Compliance Form, Login ID & Password shall be allotted to the suppliers (bidders).

- All the bidders are requested to ensure that they have a valid digital certificate well in advance to participate in the online event. Under no circumstances will the bidders be allowed to participate in the online event without Digital Certificate.

- After the completion of the Auction event, all the Bidders have to submit the Price

Break-up (as per BPCL’s price excel sheet format) within 24 hours of the reverse auction to the Service Provider for further proceedings.


Page 7 of 11

APPENDIX – I The List of Items to be procured along with the Auction Start Time & Close Time is as follows: Item Description: Respective CRFQ No..

Date: - Will be intimated later.

Description Start Time End Time

CRFQ No.

** Auto Extensions as applicable


Page 8 of 11

APPENDIX – II

PROCESS COMPLIANCE FORM (The bidders are required to print this on their company’s letterhead, sign & stamp before emailing a scanned copy)

To, Service Provider Sub: Agreement to the Process related Terms and Conditions for the Reverse Auction Dear Sir, This has reference to the Business Rules and Terms & Conditions for the Online Reverse Auction mentioned in this document for respective CRFQ for supply of….. This letter is to confirm that:

1) The undersigned is authorized representative of the company. 2) We have studied the Commercial Terms and the Business rules governing the Reverse

Auction as mentioned in your letter and confirm our agreement to them. 3) We also confirm that we have taken the training on the auction tool and have

understood the functionality of the same thoroughly. 4) We have studied the calculation sheet carefully as per our offer submitted to BPCL. We

also confirm that we will email a scanned copy or fax the price break-up of our online quoted price, within 24 hours of the reverse auction, as per BPCL’s price excel sheet format.

5) We confirm that we will send the Original copy of the Price Breakup to Service provider within 3 working days of the completion of the Online Reverse Auction.

6) We, hereby, confirm that we will honor the Bids placed by us during the Online Reverse Auction process.

7) We also confirm that we will accept our Rank / Position that will be displayed when the Bidding Time is over of the Online Reverse Auction.

8) We confirm that we have changed the password on the auction website after first log in.

9) We also confirm that we have a valid digital certificate issued by a valid Certifying Authority.

With regards, Signature with company seal Name –Company / Organization – Designation within Company / Organization – Address of Company / Organization –


Page 9 of 11

APPENDIX – III

PRICE CONFIRMATION (The bidders are required to print this on their company’s letterhead, sign & stamp before emailing a scanned copy)

To, Service provider Sub: Final price quoted during Online Reverse Auction and Price Break up Ref: respectiva CRFQ No. for supply of…. Dear Sir, We confirm that we have quoted for CRFQ No. for supply of…. As detailed below.

CRFQ Item No. & Description Quoted Basic Value of the material Effective Cost of Material

as our prices during the Online Reverse Auction conducted on : The detailed price break-up as per the BPCL excel sheet format enclosed. Thanking you and looking forward to the valuable order from BPCL. Yours sincerely, For _________________ Name: Company: Date: Seal:


Page 10 of 11

CONTACT INFORMATION

Service Provider

Bharat Petroleum Corporation Limited,

Mumbai Refinery Mumbai

H.P. Panchal Manager (CPO-R) Tel. No.: 022 – 2552 4129 E-Mail: [email protected]


Page 11 of 11



SUB : Annual Rate Contract for Supply of Bearings for BPCL-Mumbai

Refinery and BPCL-Kochi Refinery


ACCEPTANCE OF BUSINESS RULES FOR ON LINE REVERSE AUCTION (Annexure-11)

We, M/s. __________________________________________________ having

office at ______________ read BUSINESS RULES FOR ON-LINE REVERSE

AUCTION and confirm our acceptance to all the terms and conditions as

mentioned herein in the document except for deviations mentioned in the

deviation form.

Date : Signature of Authorised Signatory

with Name & designation and Co. Seal.

Name & full address of the Firm :

M/s. _______________________

Annexure - 13




GST DETAILS

• Letter to Vendors

• Guidelines for filling the template

• Template for updation of GST details

• Sample pre-filled template

��

�� !��"��#�

��#��#� $�� %� ��#� ��&�� '�� (� �� #�� #�

��#��'��

��#��#��#��)��%��#��*��#�

��#��

+�#��#��#�� !"��$��#�#��#��

�#��

,��#��$�-��(��

��

"�� .��/��0��1 ��2��

�

3��'��#�

�

�� #�� ##��

$��%� � &'�'��

�� %� �� !� ��(�� )�*�

�

�

GUIDELINES TO FILL THE TEMPLATE

1. All the details are mandatory to be filled in. The template as well as GST Registration

Certificate copy is required to be dated, stamped & signed by the authorized signatory.

2. Address in the template should be as given in GST Registration for the respective

state. In case of multiple GST registrations, kindly fill in separate templates for each

registration.

3. Signed template along with supporting documents to be sent in PDF FORMAT ONLY

(maximum 1 MB) to Email ID [email protected] with standard subject

line as �GST Registration for vendor code 3XXXXX�

4. All our future communication shall be made through updated Mobile no./Email ID/

Address as provided in the Template.

5. PLEASE NOTE THAT IF GST REGISTRATION DETAILS ARE NOT PROVIDED

TIMELY, FUTURE PAYMENTS MAY GET DELAYED.

6. If you are yet to get the registration details or in the process of getting the registration,

please provide the details accordingly in point no. 6 of the template.

7. For any further clarification, you may contact procurement officer in nearest BPCL

location or call us on toll free no. of BPEC 1800-224-221.

S.No. Particulars

1 Name of the vendor

2 Vendor Code in BPCL

3 Email ID

4 Mobile No.

5 Whether registered under

GSTRegistered Composition Unregistered

6 If Not registered, Reason for

the same

7 Whether located in SEZ Yes No

8 GSTN no. /Composition

registration no.

(Please attach the self

attested registration

Certificate)

9 Address as per GST

Registration for the state:

City:

State:

Pin Code:

10 Whether having multiple

registration in a state Yes No

If Yes, specify business unit

Template for Updation of GST Registration details

I/We confirm that information provided above is true to my knowledge & belief.

Date:________________ _____________________________________________ ________________________________

(Name & Signature of Authorized signatory) (Company Seal)

Place:_______________________

Details

1. Below threshold limit

2. In process of registrations

3. Other, pl specify

S.No. Particulars

1 Name of the vendor

2 Vendor Code in BPCL

3 Email ID

4 Mobile No.

5 Whether registered under

GSTRegistered 絃 Composition Unregistered

6 If Not registered, Reason for

the same

1. Below threshold limit

2. In process of

registrations

3. Other, pl specify7 Whether located in SEZ

Yes No 絃8 GSTN no. /Composition

registration no.

(Please attach the self

attested registration

Certificate)

9 Address as per GST

Registration for the state:

City:

State:

Pin Code:

10 Whether having multiple

registration in a state Yes No 絃 If Yes, specify business unit

Template for Updation of GST Registration details

I/We confirm that information provided above is true to my knowledge & belief.

Date:8th May 2017 Mr. ABC (Director) © (Name & Signature of Authorized signatory) (Company Seal)

Place:Mumbai

Details

ABC Pvt Ltd

300000

[email protected]

9898989898

27AAACB2901CXXM

XYZ Street

Near Railway Station

Mumbai

Maharashtra

400078

Page 1 of 1

Annexure-14

ANTI-PROFITEERING DECLARATON FORMAT

To whomsoever it may concern.

I, Mr. __________________________________, proprietor / ____________________ (similar

salutations for other authorized signatories) of

M/s. _________________________________________________ , hereby solemnly and sincerely

declare, that I have abided with all the laws and rules, as applicable on me/my firm/my

company from time to time, in my dealing with M/s Bharat Petroleum Corporation Limited

(‘BPCL’), including but not limited to Section 171 of the Central Goods and Services Tax Act,

2017.

In furtherance and compliance of the said section, I declare, that I have made commensurate

reduction in the prices of the goods and/or services as provided by me/my firm/my

company to BPCL on account of any input tax credits availed by me/my firm/my company

as a registered taxable person or the reduction in the price on account of any reduction in the

tax rate, as applicable, from time to time.

I declare that the foregoing is true and correct and the same is a legal obligation and failure to

fulfil it could result in penalties under state law.

Date:____________

Place: ___________

To be signed by the authorized person under the firm’s seal

Annexure – 15




PRICE BID.

�

�

Bidders has to fill Unit Price in INR (excluding GST and

freight) only in BPCL e-Procurement Portal.

Date post:	16-Jul-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times