BIDDER/CONTRACTOR'S LEGAL NAME: D/B/A NAME, IF APPLICABLE: BIDDER ADDRESS:
COUNTY LOCATED IN:
PA Legislative House District Number
VENDOR NUMBER:
PA Qualified Small Business (SB) YES Certification Number
PA Certified Minority-owned Business Enterprise (MBE) OR
Primary POC regarding IFB/Contract: Secondary POC regarding IFB/Contract: PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS: COMPANY'S GENERAL WEBSITE ADDRESS
SEND PURCHASE ORDER(S) TO NAME: D/B/A NAME, IF APPLICABLE: ADDRESS:
COUNTY LOCATED IN: HOURS OF OPERATION:
POC regarding PURCHASE ORDER(S): PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS:
SEND PAYMENT(S) TO NAME: D/B/A NAME, IF APPLICABLE: ADDRESS:
POC regarding PAYMENT(S): PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS:
Bethel Park, PA 15102
Ginger [email protected]
M-F 8am - 4pm
Deb Davis or Ginger Buono412-831-7601412-831-7662
P & E Educational Furniture and Equipment Inc.dba. P.E.M.Co.
www.pemcofurniture.com
P & E Educational Furniture and Equipment Inc.dba. P.E.M.Co.5335 Progress Blvd.Bethel Park, PA 15102
Allegheny
BID ITEM WORKBOOK
BIDDER/CONTRACTOR DATACOSTARS-35 Furniture and Window Treatments
5335 Progress Blvd.Bethel Park, PA 15102
37
Allegheny
P & E Educational Furniture and Equipment Inc.
40 PA Legislative Senate District Number
dba. P.E.M.Co.
5335 Progress Blvd.
[email protected] or [email protected]
[email protected] or [email protected]
Woman-owned Business Enterprise (WBE)
Deb DavisGinger Buono412-831-7601
PLEASE BE ADVISED - COMPLETE ALL QUESTIONS AND EXPLANATIONS FOR YOUR BID TO BE ACCEPTED AS A RESPONSIBLE AND RESPONSIVE BID
YES NO
No
Yes
No
No
No
Yes
No
Yes
Yes
No
No
Freight will be quoted as a separate line item.
b.) If no, is the Bidder-Contractor including shipping costs in its pricing?
4) Does the Bidder-Contractor offer any prompt payment discount(s)? If yes, please explain.
9) Is the Bidder-Contractor going to provide a dedicated COSTARS website for Purchasers (seeSection 9 of the Standard Terms and Conditions )? If yes, how much time after notification ofcontract award will the Bidder-Contractor need to have the website up and running?
8) If the Bidder is a manufacturer bidding directly, does the Bidder wish to offer contract items via itsdealer network? If yes, please attach (as an extra sheet(s) to this workbook) a list ofauthorized dealers including supplier information and stating any dealer's territory breakdown (suchas counties, municipalities, or regions). Also, indicate on the Bidder-Contractor Data Sheet arepresentative for Purchasers to contact regarding POs and payment.
7) After notification of contract award, is the Bidder-Contractor willing to further negotiate pricing withCOSTARS members?
1.5% per month late fee
b.) If yes, does the Bidder-Contractor charge any fee(s) to the Purchaser for payment(s) made bycredit card? If yes, please explain. 6) Does the Bidder-Contractor charge any late fee(s) to the Purchaser for payment not made inaccordance with Section 11 of the Standard Terms and Conditions ? If yes, please explain.
EXPLANATION1) Does the Bidder-Contractor have any minimum order requirements? If yes, please explain.
QUESTION
3) Does the Bidder-Contractor offer any pricing incentive(s) such as for Internet ordering? If yes,please explain.
2) In accordance with Section 14 of the Standard Terms and Conditions , the Contractor shall deliverall item(s) F.O.B. Destination. a.) Is the Bidder-Contractor quoting shipping costs as a separate line item?
5) a.) Does the Bidder-Contractor accept credit card(s) as a method of payment from anyPurchaser? If yes, please specify the particular type(s) of card(s) accepted:
The bidder must answer the following questions:
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsQUESTIONS
BIDDERS/CONTRACTOR'S LEGAL NAME:
Please refer to Section 5 of the COSTARS Contract Special Terms and Conditions for guidance.
StatewideOR
1 Adams 24 Elk 47 Montour2 Allegheny 25 Erie 48 Northampton3 Armstrong 26 Fayette 49 Northumberland4 Beaver 27 Forest 50 Perry5 Bedford 28 Franklin 51 Philadelphia6 Berks 29 Fulton 52 Pike7 Blair 30 Greene 53 Potter8 Bradford 31 Huntingdon 54 Schuylkill9 Bucks 32 Indiana 55 Snyder
10 Butler 33 Jefferson 56 Somerset11 Cambria 34 Juniata 57 Sullivan12 Cameron 35 Lackawanna 58 Susquehanna13 Carbon 36 Lancaster 59 Tioga14 Centre 37 Lawrence 60 Union15 Chester 38 Lebanon 61 Venango16 Clarion 39 Lehigh 62 Warren17 Clearfield 40 Luzerne 63 Washington18 Clinton 41 Lycoming 64 Wayne19 Columbia 42 McKean 65 Westmoreland20 Crawford 43 Mercer 66 Wyoming21 Cumberland 44 Mifflin 67 York22 Dauphin 45 Monroe23 Delaware 46 Montgomery
BID ITEM WORKBOOK
SERVICE AREA
SERVICE AREA
COSTARS-35 Furniture and Window Treatments
BIDDERS/CONTRACTOR'S LEGAL NAME: P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
AUTHORIZED DEALER LEGAL NAME: D/B/A NAME, IF APPLICABLE: ADDRESS:
COUNTY LOCATED IN: HOURS OF OPERATION:
POC regarding PURCHASE ORDER(S): PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS:
AUTHORIZED DEALER LEGAL NAME: D/B/A NAME, IF APPLICABLE: ADDRESS:
COUNTY LOCATED IN: HOURS OF OPERATION:
POC regarding PURCHASE ORDER(S): PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS:
AUTHORIZED DEALER LEGAL NAME: D/B/A NAME, IF APPLICABLE: ADDRESS:
COUNTY LOCATED IN: HOURS OF OPERATION:
POC regarding PURCHASE ORDER(S): PHONE NUMBER: FAX NUMBER: EMAIL ADDRESS:
[email protected] or [email protected]
5335 Progress Blvd.Bethel Park, PA 15102
AlleghenyM-F 8am - 4pm
Deb Davis or Ginger Buono412-831-7601
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsLIST OF AUTHORIZED DEALERS, IF APPLICABLE (Refer to "QUESTIONS" Tab, Question 8)
INSERT AS MANY AS MAY BE NEEDEDP $ E Educational Furniture and Equipment Inc.dba. P.E.M.Co.
BIDDERS/CONTRACTOR'S LEGAL NAME:
Media Technology, Fleetwood, Hickory, FomCore
Seating NPS/Oklahoma Sound, Hon, FomCoreStudio Furniture
Meeting & Training Room Furniture, Lecturns & Podiums NPS/Oklahoma Sound, Spectrum, HonOutdoor/Patio Furniture Ultra Play, Southern Aluminum, Leisure Craft
Daycare & Preschool Furniture
Book, Chair & Table Caddies, Carts & Trucks
PRODUCT CATEGORY(Identify all that are applicable with a checkmark.)
Lobby, Lounge, Reception & Waiting Room Furniture Flagship Carpets, Hon, FomCore, ClaridgeMailroom Furniture & Carts Safco
Law Enforcement Furniture, Evidence Lockers, Weapons Racks & Storage Art Metal Products, Lyon Storage ProductsLibrary Furniture
HonFreestanding Bookcases, Display Cases, Literature Racks & Shelving Moore Co., Marsh, Claridge
Jonti-Craft, Wood Designs,
The bidder must identify the product category(ies) and manufacturer line(s) for the items that the bidder is offering. If the Bidder is not a manufacturer, it must submit written
Educational & Dormitory FurnitureFiling & Storage Units
Cafeteria FurnitureCasegoodsComputer Furniture, Ergonomic Keyboard Trays & Monitor Arms
Audio/Visual Carts, Mounts & Stands
proof from each manufacturer of the Bidder’s authorization to sell the manufacturer’s goods and materials, as required by this Contract (the proof need not be specific to this procurement). Refer to Paragraph 7.b. of the Instructions to Bidders for COSTARS Contracts for further guidance.
Laboratory FurnitureHealthcare Furniture School Health
Scholar Craft, Columbia, Smith Systems, Fleetwood, Ten Jam, Kore, Paragon, Diversified, HonArt Metal Products, Dick Blick, HANN, Lyon Storage Products, Tennsco, Hon
Freestanding Office Furniture, Panels, Partitions & Privacy Dividers
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsPRODUCT CATEGORY/MANUFACTURER LIST
Mitchell Tables, Palmer Hamilton, Hon, BiofitFleetwood, HonInvincible, Interior Concepts, Moore Co., Hon
P & E Educational Furniture and Equipment Inc. Dba. P.E.M.Co. 035-015
MANUFACTURERS(State ALL that are applicable. Attach additional sheet(s) to this workbook if necessary.)
Magnuson Group, Safco, Moore Co., Marsh
Systems Furniture & AccessoriesTablesWindow Blinds/Shades, Curtains/Draperies, Drapery Hardware & Interior Shutters
Interior Concepts, Hon, NXTWallUltra Play, Southern Aluminum, Surface Works, Smith Systems, Mitey Lite, Allied, FleetwoodDraper, Springs Window Fashions
BIDDERS/CONTRACTOR'S LEGAL NAME:
on the purchase order at time of order.
The Bidder may submit the list of ancillary services and prices it proposes to offer. If it is not possible to submit pricing, as may be the case with certain installationservices, the Bidder shall simply note that it is offering the service and that the actual price will be negotiated between it and the COSTARS participant and annotated
COSTARS-35 Furniture and Window Treatments
Training
P & E Educational Furniture and Equipment Inc. Dba. P.E.M.Co.
Included in the sale of all furnitureNegotiated based on the size and scale of Project
ANCILLARY SERVICES, IF APPLICABLE
A Contractor may choose to offer ancillary services in conjunction with the products it provides to the Purchaser. However, any ancillary services offered must be:
BID ITEM WORKBOOK
Included in the sale of all furniture
ANCILLARY SERVICES(Identify all that are applicable with a checkmark.)
PRICING(If applicable. Please attach additional sheet(s) with detailed pricing if necessary.)
Assembly/Installation/Construction ActivitiesExtended WarrantyPost Warranty Support and Maintenance ServiceSpecial Delivery Arrangements
Negotiated based on the size and scale of Project
(1) expressly authorized in the original IFB/Contract, (2) directly related to the delivery, installation or normal use of the product or component parts purchased, (3) limited to the actual product or component parts purchased, and (4) initiated/ordered at the time of product purchase. Stand-alone services and services for productsnot purchased from this supply Contract, including existing equipment for which component parts from this contract are purchased, are not within the scope of this supply Contract. The Department of General Services reserves the right to determine which ancillary services shall be included in any contract.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
All Purchasers
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Art Metal Products
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.)Quoted +15%
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
15% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
All Purchasers
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Dick Blick
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) 2018 Pricer
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
20% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
All Purchasers
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Draper Shades
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) 2018 Pricer
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
25% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
All Purchasers
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.HANN Products
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) 2018 Pricer
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
All Purchasers
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Interior Concepts
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
35% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Invincible
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
20% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Jont-Craft Products
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:Catalog 2018
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Lyon Metal Products
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Magnuson
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Mitchell Tables
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
35% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.National Public Seating/Oklahoma Sound
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Safco
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Southern Aluminum Tables
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Tennsco
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
10% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Ultra Play Tables
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
20% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Pricer
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Wood Designs
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
0% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog + FREIGHT
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.School Health
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
10% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Springs Window Fashions
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
40% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:MFG. 2018 List Pricer
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Scholar Craft Products/CDF
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
40% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, or discountedprices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Mediatechnology
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please reference Subsection 6.b. ofthe Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Palmer Hamilton Tables
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Surface Works
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Smith Systems
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
48% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Columbia Mfg
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
35% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Moore Company (Best Rite / BALT)
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Mity Lite
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Allied Scoring Tables
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
25% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Fleetwood Products
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Kore Products
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
40% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Hickory
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
35% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Paragon
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
36% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Ten Jam
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
30% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Spectrum Industries
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
40% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Diversified Products
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
25% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Marsh
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
10% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Leisure Craft
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
40% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Flagship Carpets
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[SPECIFY QUANTITY]
% DISCOUNTFROM LIST PRICE
45% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.FomCore
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2017
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[$100 to $49,999]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[$50,000 to $299,999]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[$300,000 and Over]
% DISCOUNTFROM LIST PRICE
51% 52.50% Negotiable
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Hon
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2017 Catalog
Jan-17Jan-17
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[$100 to $49,999]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[$50,000 to $299,999]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[$300,000 and Over]
% DISCOUNTFROM LIST PRICE
40% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Claridge
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[$100 to $49,999]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[$50,000 to $299,999]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[$300,000 and Over]
% DISCOUNTFROM LIST PRICE
40% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.Biofit
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)
BIDDERS/CONTRACTORS LEGAL NAME:
MANUFACTURER:
PRICING STANDARD: (Check that which is applicable.) Catalog 2018
CATALOG OR PRICE LIST NAME:IDENTIFICATION NO. (IF APPLICABLE):
EFFECTIVE DATE:CLASS OF PURCHASER:
(i.e. All Purchasers or separate lines for specific classes, such as Educational Purchasers and Non-educational Purchasers.)
VOLUME BAND I[$100 to $49,999]
% DISCOUNTFROM LIST PRICE
VOLUME BAND II[$50,000 to $299,999]
% DISCOUNTFROM LIST PRICE
VOLUME BAND III[$300,000 and Over]
% DISCOUNTFROM LIST PRICE
25% 30% 35%
VOLUME BAND I[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND II[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
VOLUME BAND III[SPECIFY QUANTITY]
% MARK-UP ABOVE COST SHEET
_______% _______% _______%
VOLUME BAND I[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND II[SPECIFY QUANTITY]
NET PRICE
VOLUME BAND III[SPECIFY QUANTITY]
NET PRICE
$______.__ $______.__ $______.__
BID ITEM WORKBOOKCOSTARS-35 Furniture and Window TreatmentsBID ITEM SHEET
P & E Educational Furniture and Equipment Inc. Dba P.E.M.Co.035-015
PRICINGThe Bidder may offer any type of discount, mark-up, or other pricing structure such as multiple discounts for different lines of products, or different price lists, or different classes of Purchasers, or different prices for different quantities of products. Please referenceSubsection 6.b. of the Special Terms and Conditions for further guidance.
After Contract award, a Contractor may offer, either on its own initiative or at a Purchaser’s request, additional discounts, reduced mark-ups, customized lists, or discounted prices for any purchase within the scope of the Contract, even if such discounts, mark-ups, ordiscounted prices were not included in the bid prices.
The Bid Item Workbook should contain a separate Bid Item Sheet for each manufacturer’s price list or cost sheet.NXTWALL
Catalog or Manufacturer's/Distributor's Most Recently Published Price List Less % of DiscountSuppliers Cost Plus % of Mark-upCustom List including Net Prices
PRICE LIST IDENTIFICATION:2018 Catalog
Jan-18Jan-18
SAMPLE PRICING TEMPLATEIt is suggested, but not required, that the Bidder submit pricing using the template.The Bidder shall attach and submit any different format with its Bid Item Workbook.
Sample 3 - Customized List. A Contractor may update its Contract pricing information. (Reference Special Termsand Conditions, Subsection 6.c.)
EXAMPLE - VOLUME PRICING
ITEM CATEGORY
Sample 1 - Percent Discount(s) from identified Catalog or Manufacturer/Distributor's Price List. Discounts shall remain firm for the entire contract period. (Reference Special Terms and Conditions, Subsection 6.c.)
Sample 2 - Percent Mark-up above the Suppliers Specified Cost. Mark-ups shall remain firm for the entire contractperiod. (Reference Special Terms and Conditions, Subsection 6.c.)