2
made in usa & canada ANSI 107 & CSA Z96 GUIDE
made in usa & canada
ANSI 107 & CSA Z96 GUIDE
32
• Can be any garment (except pants)
• Can be on any background material that is NOT fluorescent
• Must use 4 inch Reflective Material, Yellow, or Orange / Silver / Yellow or Orange, which meets Level 2 standard for superior quality.
• REFLECTIVE MATERIAL EMPLACEMENT must be applied in a CSA approved pattern: provides 360-degree visibility with two vertical strips on front, “X” on back, material around the waist.
• Can be any garment (except pants)
• Must be on a lime yellow, orange or red, fluorescent background material.
• Must use 2 inch Silver Reflective Material, which meets Level 2 standard for superior quality.
• REFLECTIVE MATERIAL EMPLACEMENT must be applied in a CSA approved pattern: provides 360-degree visibility with two vertical strips on front, “X” on back, material around the waist.
• Applies only to coveralls, bib overalls & shirt with reflective tape on arms or pant & shirt with reflective tape on arms combination.
• Must be on a lime yellow, orange or red, fluorescent background material.
• Must use 2 inch Silver Reflective Material, which meets Level 2 standard for superior quality.
• REFLECTIVE MATERIAL EMPLACEMENT must be applied in a CSA approved pattern: provides 360-degree visibility with two vertical strips on front, “X” on back, material around the waist, a horizontal strip around each leg and arm.
IDENTIFYING THE CANADIAN HIGH VISIBILITY STANDARD FOR WORKWEAR, CSA Z96
* All 3M Reflective Material meets Level 2 standard for superior quality.
• Can be any garment (except pants)
• Can be on any background material that is NOT fluorescent
• Must use 4 inch Reflective Material, Yellow or Orange / Silver / Yellow or Orange, which meets Level 2 standard for superior quality.
• REFLECTIVE MATERIAL EMPLACEMENT must be applied in a CSA approved pattern: provides
360-degree visibility with two vertical strips on front, “X” on back, material around the waist.
• Can be any garment (except pants)
• Must be on a lime yellow, orange or red, fluorescent background material.
• Must use 2 inch Silver Reflective Material, which meets Level 2 standard for superior quality.
• REFLECTIVE MATERIAL EMPLACEMENT must be applied in a CSA approved pattern: provides 360-degree visibility with two vertical strips on front, “X” on back, material around the waist.
• Can be any garment (except pants)
• Must be on a lime yellow, orange or red, fluorescent background material.
• Must use 2 inch Silver Reflective Material, which meets Level 2 standard for superior quality.
• REFLECTIVE MATERIAL EMPLACEMENT must be applied in a CSA approved pattern: provides 360-degree visibility with two vertical strips on front, “X” on back, material around the waist, a horizontal strip around each arm.
• Pants
• Can be on any background material.
• Must use 2 inch Silver Reflective Material, which meets Level 2 standard for superior quality on fluorescent background or 4 inch Reflective Material, Yellow, or Orange / Silver / Yellow or Orange, which meets Level 2 standard for superior quality on non-fluorescent background.
IDENTIFYING THE AMERICAN HIGH VISIBILITY STANDARD FOR WORKWEAR, ANSI 107
* All 3M Reflective Material meets Level 2 standard for superior quality.
